summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2021-10-22Merge series "Initial Fairphone 4 support" from Luca Weiss <luca@z3ntu.xyz>:Mark Brown
This series adds basic support for the recently announced Fairphone 4 smartphone, based on the Snapdragon 750G (sm7225). This adds support for UART, power & volume buttons, screen based on simple-framebuffer, regulators and USB. v2 fixes some stylistic problems in dts and corrects the situation with pm6350 regulator supplies. Luca Weiss (11): clk: qcom: add select QCOM_GDSC for SM6350 dt-bindings: regulator: qcom,rpmh: Add compatible for PM6350 regulator: qcom-rpmh: Add PM6350 regulators dt-bindings: pinctrl: qcom,pmic-gpio: Add compatible for PM6350 pinctrl: qcom: spmi-gpio: Add compatible for PM6350 arm64: dts: qcom: Add PM6350 PMIC arm64: dts: qcom: sm6350: add debug uart dt-bindings: arm: cpus: Add Kryo 570 CPUs dt-bindings: arm: qcom: Document sm7225 and fairphone,fp4 board arm64: dts: qcom: Add SM7225 device tree arm64: dts: qcom: sm7225: Add device tree for Fairphone 4 .../devicetree/bindings/arm/cpus.yaml | 1 + .../devicetree/bindings/arm/qcom.yaml | 6 + .../bindings/pinctrl/qcom,pmic-gpio.yaml | 2 + .../regulator/qcom,rpmh-regulator.yaml | 2 + arch/arm64/boot/dts/qcom/Makefile | 1 + arch/arm64/boot/dts/qcom/pm6350.dtsi | 54 +++ arch/arm64/boot/dts/qcom/sm6350.dtsi | 31 ++ .../boot/dts/qcom/sm7225-fairphone-fp4.dts | 320 ++++++++++++++++++ arch/arm64/boot/dts/qcom/sm7225.dtsi | 16 + drivers/clk/qcom/Kconfig | 1 + drivers/pinctrl/qcom/pinctrl-spmi-gpio.c | 1 + drivers/regulator/qcom-rpmh-regulator.c | 32 ++ 12 files changed, 467 insertions(+) create mode 100644 arch/arm64/boot/dts/qcom/pm6350.dtsi create mode 100644 arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts create mode 100644 arch/arm64/boot/dts/qcom/sm7225.dtsi -- 2.33.0
2021-10-22Merge series "Add support for the silergy,sy7636a" from Alistair Francis ↵Mark Brown
<alistair@alistair23.me>: v13: - Address comments on thermal driver - Rebase on master (without other patches) v12: - Rebase v11: - Address comments on hwmon - Improve "mfd: simple-mfd-i2c: Add a Kconfig name" commit message v10: - Use dev_get_regmap() instead of dev_get_drvdata() v9: - Convert to use the simple-mfd-i2c instead Alistair Francis (9): dt-bindings: mfd: Initial commit of silergy,sy7636a.yaml mfd: simple-mfd-i2c: Add a Kconfig name mfd: simple-mfd-i2c: Enable support for the silergy,sy7636a regulator: sy7636a: Remove requirement on sy7636a mfd thermal: sy7636a: Add thermal driver for sy7636a hwmon: sy7636a: Add temperature driver for sy7636a ARM: imx_v6_v7_defconfig: Enable silergy,sy7636a ARM: dts: imx7d: remarkable2: Enable silergy,sy7636a ARM: dts: imx7d: remarkable2: Enable lcdif .../bindings/mfd/silergy,sy7636a.yaml | 79 ++++++++++ Documentation/hwmon/sy7636a-hwmon.rst | 24 ++++ arch/arm/boot/dts/imx7d-remarkable2.dts | 136 ++++++++++++++++++ arch/arm/configs/imx_v6_v7_defconfig | 4 + drivers/hwmon/Kconfig | 9 ++ drivers/hwmon/Makefile | 1 + drivers/hwmon/sy7636a-hwmon.c | 75 ++++++++++ drivers/mfd/Kconfig | 2 +- drivers/mfd/simple-mfd-i2c.c | 12 ++ drivers/regulator/Kconfig | 1 - drivers/regulator/sy7636a-regulator.c | 2 +- drivers/thermal/Kconfig | 6 + drivers/thermal/Makefile | 1 + drivers/thermal/sy7636a_thermal.c | 94 ++++++++++++ include/linux/mfd/sy7636a.h | 41 ++++++ 15 files changed, 484 insertions(+), 3 deletions(-) create mode 100644 Documentation/devicetree/bindings/mfd/silergy,sy7636a.yaml create mode 100644 Documentation/hwmon/sy7636a-hwmon.rst create mode 100644 drivers/hwmon/sy7636a-hwmon.c create mode 100644 drivers/thermal/sy7636a_thermal.c create mode 100644 include/linux/mfd/sy7636a.h -- 2.31.1
2021-10-21soc: fsl: dpio: rename the enqueue descriptor variableYouri Querry
The struct qbman_eq_desc 'd' variable declaration is covering one of the function parameters. This has no functional impact since this function parameter was not used after the new declaration. Even so, rename the variable so that we make the code more readable. Fixes: 3b2abda7d28c ("soc: fsl: dpio: Replace QMAN array mode with ring mode enqueue") Signed-off-by: Youri Querry <youri.querry_1@nxp.com> Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: Li Yang <leoyang.li@nxp.com>
2021-10-21soc: fsl: dpio: use an explicit NULL instead of 0Ioana Ciornei
Use an explicit NULL pointer when calling qbman_swp_enqueue_multiple() instead of a plain integer. Without this fix, we get the following compile time error. drivers/soc/fsl/dpio/dpio-service.c:466:60: warning: Using plain integer as NULL pointer Fixes: 9d98809711ae ("soc: fsl: dpio: Adding QMAN multiple enqueue interface") Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: Li Yang <leoyang.li@nxp.com>
2021-10-21soc: fsl: rcpm: Make use of the helper function devm_platform_ioremap_resource()Cai Huoqing
Use the devm_platform_ioremap_resource() helper instead of calling platform_get_resource() and devm_ioremap_resource() separately Signed-off-by: Cai Huoqing <caihuoqing@baidu.com> Signed-off-by: Li Yang <leoyang.li@nxp.com>
2021-10-21soc: fsl: guts: Make use of the helper function devm_platform_ioremap_resource()Cai Huoqing
Use the devm_platform_ioremap_resource() helper instead of calling platform_get_resource() and devm_ioremap_resource() separately Signed-off-by: Cai Huoqing <caihuoqing@baidu.com> Signed-off-by: Li Yang <leoyang.li@nxp.com>
2021-10-21net: ax88796c: ASIX AX88796C SPI Ethernet Adapter DriverŁukasz Stelmach
ASIX AX88796[1] is a versatile ethernet adapter chip, that can be connected to a CPU with a 8/16-bit bus or with an SPI. This driver supports SPI connection. The driver has been ported from the vendor kernel for ARTIK5[2] boards. Several changes were made to adapt it to the current kernel which include: + updated DT configuration, + clock configuration moved to DT, + new timer, ethtool and gpio APIs, + dev_* instead of pr_* and custom printk() wrappers, + removed awkward vendor power managemtn. + introduced ethtool tunable to control SPI compression [1] https://www.asix.com.tw/products.php?op=pItemdetail&PItemID=104;65;86&PLine=65 [2] https://git.tizen.org/cgit/profile/common/platform/kernel/linux-3.10-artik/ The other ax88796 driver is for NE2000 compatible AX88796L chip. These chips are not compatible. Hence, two separate drivers are required. Signed-off-by: Łukasz Stelmach <l.stelmach@samsung.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-22fsi: sbefifo: Use interruptible mutex lockingEddie James
Some SBE operations have extremely large responses and can require several minutes to process the response. During this time, the device lock must be held. If another process attempts an operation, it will wait for the mutex for longer than the kernel hung task watchdog allows. Therefore, use the interruptible function to lock the mutex. Signed-off-by: Eddie James <eajames@linux.ibm.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20210803213016.44739-1-eajames@linux.ibm.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-10-22fsi: sbefifo: Add sysfs file indicating a timeout errorEddie James
The SBEFIFO timeout error requires special handling in userspace to do recovery operations. Add a sysfs file to indicate a timeout error, and notify pollers when a timeout occurs. This will be used by the openpower-occ-control application. Signed-off-by: Eddie James <eajames@linux.ibm.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20211019211749.38059-3-eajames@linux.ibm.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-10-22hwmon: (occ) Provide the SBEFIFO FFDC in binary sysfsEddie James
Save any FFDC provided by the OCC driver, and provide it to userspace through a binary sysfs entry. Notify userspace pollers when there is an error too. Signed-off-by: Eddie James <eajames@linux.ibm.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20211019205307.36946-5-eajames@linux.ibm.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-10-22fsi: occ: Store the SBEFIFO FFDC in the user response bufferEddie James
If the SBEFIFO response indicates an error, store the response in the user buffer and return an error. Previously, the user had no way of obtaining the SBEFIFO FFDC. The user's buffer now contains data in the event of a failure. No change in the event of a successful transfer. Signed-off-by: Eddie James <eajames@linux.ibm.com> Link: https://lore.kernel.org/r/20211019205307.36946-3-eajames@linux.ibm.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-10-22fsi: occ: Use a large buffer for responsesEddie James
Allocate a large buffer for each OCC to handle response data. This removes memory allocation during an operation, and also allows for the maximum amount of SBE FFDC. Previously for the putsram and attn commands, only 32 words would have been available, and for getsram, only up to the size of the transfer. SBE FFDC might be up to 8Kb. The SBE interface expects data to be specified in units of words (4 bytes), defined as OCC_MAX_RESP_WORDS. This change allows the full FFDC capture to be implemented, where before it was not available. Signed-off-by: Eddie James <eajames@linux.ibm.com> Link: https://lore.kernel.org/r/20211019205307.36946-2-eajames@linux.ibm.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-10-21net: enetc: use the skb variable directly in enetc_clean_tx_ring()Vladimir Oltean
The code checks whether the skb had one-step TX timestamping enabled, in order to schedule the work item for emptying the priv->tx_skbs queue. That code checks for "tx_swbd->skb" directly, when we already had a skb retrieved using enetc_tx_swbd_get_skb(tx_swbd) - a TX software BD can also hold an XDP_TX packet or an XDP frame. But since the direct tx_swbd dereference is in an "if" block guarded by the non-NULL quality of "skb", accessing "tx_swbd->skb" directly is not wrong, just confusing. Just use the local variable named "skb". Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-21net: enetc: remove local "priv" variable in enetc_clean_tx_ring()Vladimir Oltean
The "priv" variable is needed in the "check_writeback" scope since commit d39823121911 ("enetc: add hardware timestamping support"). Since commit 7294380c5211 ("enetc: support PTP Sync packet one-step timestamping"), we also need "priv" in the larger function scope. So the local variable from the "if" block scope is not needed, and actually shadows the other one. Delete it. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-22auxdisplay: cfag12864bfb: code indent should use tabs where possibleHuiquan Deng
Resolves the checkpatch error. Signed-off-by: Huiquan Deng <denghuiquan@cdjrlc.com> [reworded and avoid moving the line] Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
2021-10-22auxdisplay: ht16k33: remove superfluous header filesMianhan Liu
ht16k33.c doesn't use any macro or function declared in linux/slab.h. Thus, these files can be removed from ht16k33.c safely without affecting the compilation. Signed-off-by: Mianhan Liu <liumh1@shanghaitech.edu.cn> Acked-by: Robin van der Gracht <robin@protonic.nl> [reworded] Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
2021-10-22auxdisplay: ks0108: remove superfluous header filesMianhan Liu
ks0108.c doesn't use any macro or function declared in linux/fs.h, linux/io.h and linux/uaccess.h. Thus, these files can be removed from ks0108.c safely without affecting the compilation. Signed-off-by: Mianhan Liu <liumh1@shanghaitech.edu.cn> [reworded] Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
2021-10-22auxdisplay: cfag12864bfb: remove superfluous header filesMianhan Liu
cfag12864bfb.c doesn't use any macro or function declared in linux/delay.h, linux/string.h and linux/uaccess.h. Thus, these files can be removed from cfag12864bfb.c safely without affecting the compilation. Signed-off-by: Mianhan Liu <liumh1@shanghaitech.edu.cn> [reworded] Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
2021-10-21auxdisplay: ht16k33: Make use of device propertiesGeert Uytterhoeven
The device property API allows drivers to gather device resources from different sources, such as ACPI, and lift the dependency on Device Tree. Convert the driver to unleash the power of the device property API. Suggested-by: Marek Behún <kabel@kernel.org> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Acked-by: Robin van der Gracht <robin@protonic.nl> Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
2021-10-21auxdisplay: ht16k33: Add LED supportGeert Uytterhoeven
Instantiate a single LED based on the "led" subnode in DT. This allows the user to control display brightness and blinking (backed by hardware support) through the LED class API and triggers, and exposes the display color. The LED will be named "auxdisplay:<color>:<function>". When running in dot-matrix mode and if no "led" subnode is found, the driver falls back to the traditional backlight mode, to preserve backwards compatibility. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Reviewed-by: Marek Behún <kabel@kernel.org> Reviewed-by: Robin van der Gracht <robin@protonic.nl> Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
2021-10-21auxdisplay: ht16k33: Add support for segment displaysGeert Uytterhoeven
The Holtek HT16K33 LED controller is not only used for driving dot-matrix displays, but also for driving segment displays. Add support for 4-digit 7-segment and quad 14-segment alphanumeric displays, like the Adafruit 7-segment and 14-segment display backpack and FeatherWing expansion boards. Use the character line display core support to display a message, which will be scrolled if it doesn't fit. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Robin van der Gracht <robin@protonic.nl> Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
2021-10-21auxdisplay: ht16k33: Extract frame buffer probingGeert Uytterhoeven
Extract all frame buffer (including backlight) probing into ht16k33_fbdev_probe(). Call ht16k33_fbdev_probe() after ht16k33_keypad_probe(), as the latter does not need any manual cleanup in the probe error path. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Reviewed-by: Robin van der Gracht <robin@protonic.nl> Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
2021-10-21auxdisplay: ht16k33: Extract ht16k33_brightness_set()Geert Uytterhoeven
Extract brightness handling into a helper function, so it can be called from multiple places. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Reviewed-by: Robin van der Gracht <robin@protonic.nl> Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
2021-10-21auxdisplay: ht16k33: Move delayed workGeert Uytterhoeven
Move delayed_work from ht16k33_fbdev to ht16k33_priv, as it is not specific to dot-matrix displays, but common to all display types. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Robin van der Gracht <robin@protonic.nl> Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
2021-10-21auxdisplay: ht16k33: Add helper variable devGeert Uytterhoeven
This driver has many users of "client->dev". Add shorthands to simplify the code. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Robin van der Gracht <robin@protonic.nl> Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
2021-10-21auxdisplay: ht16k33: Convert to simple i2c probe functionGeert Uytterhoeven
ht16k33_probe() does not use the passed i2c_device_id, so the driver can be converted trivially to the new-style of i2c probing. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Robin van der Gracht <robin@protonic.nl> Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
2021-10-21auxdisplay: ht16k33: Remove unneeded error check in keypad probe()Geert Uytterhoeven
There is no need to check the return code of input_register_device(), just propagate it to the caller. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Robin van der Gracht <robin@protonic.nl> Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
2021-10-21auxdisplay: ht16k33: Use HT16K33_FB_SIZE in ht16k33_initialize()Geert Uytterhoeven
Use the existing HT16K33_FB_SIZE definition instead of open-coding the same calculation using an hardcoded value. While at it, restore reverse Christmas tree variable declaration order. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Robin van der Gracht <robin@protonic.nl> Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
2021-10-21auxdisplay: ht16k33: Fix frame buffer device blankingGeert Uytterhoeven
As the ht16k33 frame buffer sub-driver does not register an fb_ops.fb_blank() handler, blanking does not work: $ echo 1 > /sys/class/graphics/fb0/blank sh: write error: Invalid argument Fix this by providing a handler that always returns zero, to make sure blank events will be sent to the actual device handling the backlight. Reported-by: Robin van der Gracht <robin@protonic.nl> Suggested-by: Robin van der Gracht <robin@protonic.nl> Fixes: 8992da44c6805d53 ("auxdisplay: ht16k33: Driver for LED controller") Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
2021-10-21auxdisplay: ht16k33: Connect backlight to fbdevGeert Uytterhoeven
Currently /sys/class/graphics/fb0/bl_curve is not accessible (-ENODEV), as the driver does not connect the backlight to the frame buffer device. Fix this moving backlight initialization up, and filling in fb_info.bl_dev. Fixes: 8992da44c6805d53 ("auxdisplay: ht16k33: Driver for LED controller") Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Reviewed-by: Robin van der Gracht <robin@protonic.nl> Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
2021-10-21auxdisplay: linedisp: Add support for changing scroll rateGeert Uytterhoeven
If the message to display is longer than the number of characters that the display can show, the message will be scrolled. Currently the scroll rate is fixed, moving every 500 ms. Add support for changing the scroll rate through a "scroll_step_ms" device attribute in sysfs. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
2021-10-21auxdisplay: linedisp: Use kmemdup_nul() helperGeert Uytterhoeven
Use the existing kmemdup_nul() helper instead of open-coding the same operation. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
2021-10-21auxdisplay: Extract character line display core supportGeert Uytterhoeven
Extract the character line display core support from the simple ASCII LCD driver for the MIPS Boston, Malta & SEAD3 development boards into its own subdriver, so it can be reused for other displays. As this moves the "message" device attribute in sysfs in a "linedisp.N" subdirectory, a symlink is added to preserve backwards compatibility. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
2021-10-21auxdisplay: img-ascii-lcd: Convert device attribute to sysfs_emit()Geert Uytterhoeven
Convert the "message" device attribute from sprintf() to sysfs_emit(), as the latter is aware of the PAGE_SIZE buffer. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
2021-10-21auxdisplay: img-ascii-lcd: Add helper variable devGeert Uytterhoeven
img_ascii_lcd_probe() has many users of "pdev->dev". Add a shorthand to simplify the code. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
2021-10-21auxdisplay: img-ascii-lcd: Fix lock-up when displaying empty stringGeert Uytterhoeven
While writing an empty string to a device attribute is a no-op, and thus does not need explicit safeguards, the user can still write a single newline to an attribute file: echo > .../message If that happens, img_ascii_lcd_display() trims the newline, yielding an empty string, and causing an infinite loop in img_ascii_lcd_scroll(). Fix this by adding a check for empty strings. Clear the display in case one is encountered. Fixes: 0cad855fbd083ee5 ("auxdisplay: img-ascii-lcd: driver for simple ASCII LCD displays") Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
2021-10-21drm/msm/dsi: fix wrong type in msm_dsi_hostJessica Zhang
Change byte_clk_rate, pixel_clk_rate, esc_clk_rate, and src_clk_rate from u32 to unsigned long, since clk_get_rate() returns an unsigned long. Fixes: a6bcddbc2ee1 ("drm/msm: dsi: Handle dual-channel for 6G as well") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Jessica Zhang <jesszhan@codeaurora.org> Link: https://lore.kernel.org/r/20211020183438.32263-1-jesszhan@codeaurora.org Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-10-21drm/msm: Fix potential NULL dereference in DPU SSPPJessica Zhang
Move initialization of sblk in _sspp_subblk_offset() after NULL check to avoid potential NULL pointer dereference. Fixes: 25fdd5933e4c ("drm/msm: Add SDM845 DPU support") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Jessica Zhang <jesszhan@codeaurora.org> Link: https://lore.kernel.org/r/20211020175733.3379-1-jesszhan@codeaurora.org Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-10-22Merge tag 'drm-intel-gt-next-2021-10-21' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-intel into drm-next UAPI Changes: - Expose multi-LRC submission interface Similar to the bonded submission interface but simplified. Comes with GuC only implementation for now. See kerneldoc for more details. Userspace changes: https://github.com/intel/media-driver/pull/1252 - Expose logical engine instance to user Needed by the multi-LRC submission interface for GuC Userspace changes: https://github.com/intel/media-driver/pull/1252 Driver Changes: - Fix blank screen booting crashes when CONFIG_CC_OPTIMIZE_FOR_SIZE=y (Hugh) - Add support for multi-LRC submission in the GuC backend (Matt B) - Add extra cache flushing before making pages userspace visible (Matt A, Thomas) - Mark internal GPU object pages dirty so they will be flushed properly (Matt A) - Move remaining debugfs interfaces i915_wedged/i915_forcewake_user into gt (Andi) - Replace the unconditional clflushes with drm_clflush_virt_range() (Ville) - Remove IS_ACTIVE macro completely (Lucas) - Improve kerneldocs for cache_dirty (Matt A) - Add missing includes (Lucas) - Selftest improvements (Matt R, Ran, Matt A) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/YXFmLKoq8Fg9JxSd@jlahtine-mobl.ger.corp.intel.com
2021-10-21hwmon: (dell-smm) Speed up setting of fan speedArmin Wolf
When setting the fan speed, i8k_set_fan() calls i8k_get_fan_status(), causing an unnecessary SMM call since from the two users of this function, only i8k_ioctl_unlocked() needs to know the new fan status while dell_smm_write() ignores the new fan status. Since SMM calls can be very slow while also making error reporting difficult for dell_smm_write(), remove the function call from i8k_set_fan() and call it separately in i8k_ioctl_unlocked(). Tested on a Dell Inspiron 3505. Signed-off-by: Armin Wolf <W_Armin@gmx.de> Reviewed-by: Pali Rohár <pali@kernel.org> Link: https://lore.kernel.org/r/20211021190531.17379-6-W_Armin@gmx.de Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-10-21hwmon: (dell-smm) Add comment explaining usage of i8k_config_data[]Armin Wolf
i8k_config_data[] should only be used for applying device specific quirks in case autoconfig does not work properly on certain devices. Signed-off-by: Armin Wolf <W_Armin@gmx.de> Reviewed-by: Pali Rohár <pali@kernel.org> Link: https://lore.kernel.org/r/20211021190531.17379-5-W_Armin@gmx.de Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-10-21hwmon: (dell-smm) Return -ENOIOCTLCMD instead of -EINVALArmin Wolf
Returning -ENOIOCTLCMD gives the callers a better hint of what went wrong and is the recommended behavior. Signed-off-by: Armin Wolf <W_Armin@gmx.de> Acked-by: Pali Rohár <pali@kernel.org> Link: https://lore.kernel.org/r/20211021190531.17379-4-W_Armin@gmx.de Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-10-21hwmon: (dell-smm) Use strscpy_pad()Armin Wolf
Using strscpy_pad() allows for fewer memory accesses since memset() will not unconditionally zero-out the whole buffer. Signed-off-by: Armin Wolf <W_Armin@gmx.de> Acked-by: Pali Rohár <pali@kernel.org> Link: https://lore.kernel.org/r/20211021190531.17379-3-W_Armin@gmx.de Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-10-21hwmon: (dell-smm) Sort includes in alphabetical orderArmin Wolf
Sort includes for better overview. Signed-off-by: Armin Wolf <W_Armin@gmx.de> Acked-by: Pali Rohár <pali@kernel.org> Link: https://lore.kernel.org/r/20211021190531.17379-2-W_Armin@gmx.de Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-10-21iio: frequency: adrf6780: add support for ADRF6780Antoniu Miclaus
The ADRF6780 is a silicon germanium (SiGe) design, wideband, microwave upconverter optimized for point to point microwave radio designs operating in the 5.9 GHz to 23.6 GHz frequency range. Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/ADRF6780.pdf Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com> Link: https://lore.kernel.org/r/20211021113244.56936-1-antoniu.miclaus@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-10-21iio: chemical: scd4x: Add a scale for the co2 concentration readingRoan van Dijk
This patch adds a scale for the co2 concentration reading. The reading is expressed in percent after applying the scale to the raw value. Signed-off-by: Roan van Dijk <roan@protonic.nl> Link: https://lore.kernel.org/r/20211021140018.3051213-1-roan@protonic.nl Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-10-22Revert "drm/ast: Add detect function support"Kim Phillips
This reverts commit aae74ff9caa8de9a45ae2e46068c417817392a26, since it prevents my AMD Milan system from booting, with: [ 27.189558] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 27.197506] #PF: supervisor write access in kernel mode [ 27.203333] #PF: error_code(0x0002) - not-present page [ 27.209064] PGD 0 P4D 0 [ 27.211885] Oops: 0002 [#1] PREEMPT SMP NOPTI [ 27.216744] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.15.0-rc6+ #15 [ 27.223928] Hardware name: AMD Corporation ETHANOL_X/ETHANOL_X, BIOS RXM1006B 08/20/2021 [ 27.232955] RIP: 0010:run_timer_softirq+0x38b/0x4a0 [ 27.238397] Code: 4c 89 f7 e8 37 27 ac 00 49 c7 46 08 00 00 00 00 49 8b 04 24 48 85 c0 74 71 4d 8b 3c 24 4d 89 7e 08 66 90 49 8b 07 49 8b 57 08 <48> 89 02 48 85 c0 74 04 48 89 50 08 49 8b 77 18 41 f6 47 22 20 4c [ 27.259350] RSP: 0018:ffffc42d00003ee8 EFLAGS: 00010086 [ 27.265176] RAX: dead000000000122 RBX: 0000000000000000 RCX: 0000000000000101 [ 27.273134] RDX: 0000000000000000 RSI: 0000000000000087 RDI: 0000000000000001 [ 27.281084] RBP: ffffc42d00003f70 R08: 0000000000000000 R09: 00000000000003eb [ 27.289043] R10: ffffa0860cb300d0 R11: ffffa0c44de290b0 R12: ffffc42d00003ef8 [ 27.297002] R13: 00000000fffef200 R14: ffffa0c44de18dc0 R15: ffffa0867a882350 [ 27.304961] FS: 0000000000000000(0000) GS:ffffa0c44de00000(0000) knlGS:0000000000000000 [ 27.313988] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 27.320396] CR2: 0000000000000000 CR3: 000000014569c001 CR4: 0000000000770ef0 [ 27.328346] PKRU: 55555554 [ 27.331359] Call Trace: [ 27.334073] <IRQ> [ 27.336314] ? __queue_work+0x420/0x420 [ 27.340589] ? lapic_next_event+0x21/0x30 [ 27.345060] ? clockevents_program_event+0x8f/0xe0 [ 27.350402] __do_softirq+0xfb/0x2db [ 27.354388] irq_exit_rcu+0x98/0xd0 [ 27.358275] sysvec_apic_timer_interrupt+0xac/0xd0 [ 27.363620] </IRQ> [ 27.365955] asm_sysvec_apic_timer_interrupt+0x12/0x20 [ 27.371685] RIP: 0010:cpuidle_enter_state+0xcc/0x390 [ 27.377292] Code: 3d 01 79 0a 50 e8 44 ed 77 ff 49 89 c6 0f 1f 44 00 00 31 ff e8 f5 f8 77 ff 80 7d d7 00 0f 85 e6 01 00 00 fb 66 0f 1f 44 00 00 <45> 85 ff 0f 88 17 01 00 00 49 63 c7 4c 2b 75 c8 48 8d 14 40 48 8d [ 27.398243] RSP: 0018:ffffffffb0e03dc8 EFLAGS: 00000246 [ 27.404069] RAX: ffffa0c44de00000 RBX: 0000000000000001 RCX: 000000000000001f [ 27.412028] RDX: 0000000000000000 RSI: ffffffffb0bafc1f RDI: ffffffffb0bbdb81 [ 27.419986] RBP: ffffffffb0e03e00 R08: 00000006549f8f3f R09: ffffffffb1065200 [ 27.427935] R10: ffffa0c44de27ae4 R11: ffffa0c44de27ac4 R12: ffffa0c5634cb000 [ 27.435894] R13: ffffffffb1065200 R14: 00000006549f8f3f R15: 0000000000000001 [ 27.443854] ? cpuidle_enter_state+0xbb/0x390 [ 27.448712] cpuidle_enter+0x2e/0x40 [ 27.452695] call_cpuidle+0x23/0x40 [ 27.456584] do_idle+0x1f0/0x270 [ 27.460181] cpu_startup_entry+0x20/0x30 [ 27.464553] rest_init+0xd4/0xe0 [ 27.468149] arch_call_rest_init+0xe/0x1b [ 27.472619] start_kernel+0x6bc/0x6e2 [ 27.476764] x86_64_start_reservations+0x24/0x26 [ 27.481912] x86_64_start_kernel+0x75/0x79 [ 27.486477] secondary_startup_64_no_verify+0xb0/0xbb [ 27.492111] Modules linked in: kvm_amd(+) kvm ipmi_si(+) ipmi_devintf rapl wmi_bmof ipmi_msghandler input_leds ccp k10temp mac_hid sch_fq_codel msr ip_tables x_tables autofs4 btrfs blake2b_generic zstd_compress raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor raid6_pq libcrc32c raid1 raid0 multipath linear ast i2c_algo_bit drm_vram_helper drm_ttm_helper ttm drm_kms_helper crct10dif_pclmul crc32_pclmul ghash_clmulni_intel syscopyarea aesni_intel sysfillrect crypto_simd sysimgblt fb_sys_fops cryptd hid_generic cec nvme ahci usbhid drm e1000e nvme_core hid libahci i2c_piix4 wmi [ 27.551789] CR2: 0000000000000000 [ 27.555482] ---[ end trace 897987dfe93dccc6 ]--- [ 27.560630] RIP: 0010:run_timer_softirq+0x38b/0x4a0 [ 27.566069] Code: 4c 89 f7 e8 37 27 ac 00 49 c7 46 08 00 00 00 00 49 8b 04 24 48 85 c0 74 71 4d 8b 3c 24 4d 89 7e 08 66 90 49 8b 07 49 8b 57 08 <48> 89 02 48 85 c0 74 04 48 89 50 08 49 8b 77 18 41 f6 47 22 20 4c [ 27.587021] RSP: 0018:ffffc42d00003ee8 EFLAGS: 00010086 [ 27.592848] RAX: dead000000000122 RBX: 0000000000000000 RCX: 0000000000000101 [ 27.600808] RDX: 0000000000000000 RSI: 0000000000000087 RDI: 0000000000000001 [ 27.608765] RBP: ffffc42d00003f70 R08: 0000000000000000 R09: 00000000000003eb [ 27.616716] R10: ffffa0860cb300d0 R11: ffffa0c44de290b0 R12: ffffc42d00003ef8 [ 27.624673] R13: 00000000fffef200 R14: ffffa0c44de18dc0 R15: ffffa0867a882350 [ 27.632624] FS: 0000000000000000(0000) GS:ffffa0c44de00000(0000) knlGS:0000000000000000 [ 27.641650] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 27.648159] CR2: 0000000000000000 CR3: 000000014569c001 CR4: 0000000000770ef0 [ 27.656119] PKRU: 55555554 [ 27.659133] Kernel panic - not syncing: Fatal exception in interrupt [ 29.030411] Shutting down cpus with NMI [ 29.034699] Kernel Offset: 0x2e600000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff) [ 29.046790] ---[ end Kernel panic - not syncing: Fatal exception in interrupt ]--- Since unreliable, found by bisecting for KASAN's use-after-free in enqueue_timer+0x4f/0x1e0, where the timer callback is called. Reported-by: Kim Phillips <kim.phillips@amd.com> Signed-off-by: Kim Phillips <kim.phillips@amd.com> Fixes: aae74ff9caa8 ("drm/ast: Add detect function support") Link: https://lore.kernel.org/lkml/0f7871be-9ca6-5ae4-3a40-5db9a8fb2365@amd.com/ Cc: Ainux <ainux.wang@gmail.com> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: David Airlie <airlied@redhat.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: sterlingteng@gmail.com Cc: chenhuacai@kernel.org Cc: Chuck Lever III <chuck.lever@oracle.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Borislav Petkov <bp@suse.de> Cc: Jon Grimm <jon.grimm@amd.com> Cc: dri-devel <dri-devel@lists.freedesktop.org> Cc: linux-kernel <linux-kernel@vger.kernel.org> Signed-off-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211021153006.92983-1-kim.phillips@amd.com
2021-10-21mmc: dw_mmc: Drop use of ->init_card() callbackUlf Hansson
For dw_mmc, the ->init_card() callback is being used to turn on/off automatic internal clock gating for powersave, which is needed to properly support SDIO irqs on DAT1. However, using the ->init_card() comes with a drawback in this case, as it means that the powersave feature becomes disabled, no matter whether the SDIO irqs becomes turned on or not. To improve the behaviour, let's change into using the ->enable_sdio_irq() callback instead. This works fine, because dw_mmc uses sdio_signal_irq() to signal the irqs, thus the ->enable_sdio_irq() is never executed from within atomic context. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Link: https://lore.kernel.org/r/20211020102907.70195-1-ulf.hansson@linaro.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-10-21mmc: sdhci-omap: Fix build if CONFIG_PM_SLEEP is not setTony Lindgren
Commit f433e8aac6b9 ("mmc: sdhci-omap: Implement PM runtime functions") combined the use of runtime PM and system suspend functions but left the ifdef CONFIG_PM_SLEEP in place causing undeclared identifier error for sdhci_omap_runtime_suspend if CONFIG_PM_SLEEP is not enabled. Let's fix the error by removing ifdef CONFIG_PM_SLEEP and tagging the reset of the PM related functions with __maybe_unused. Let's also remove the forward declaration for sdhci_omap_context_save(), that was accidentally left from an earlier version and is no longer used. Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Tony Lindgren <tony@atomide.com> [Ulf: Rebased and fixed build error] Link: https://lore.kernel.org/r/20211021134352.10135-1-tony@atomide.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-10-21mmc: sdhci-omap: Remove forward declaration of sdhci_omap_context_save()Geert Uytterhoeven
If CONFIG_PM_SLEEP=n: drivers/mmc/host/sdhci-omap.c:1213:13: error: ‘sdhci_omap_context_save’ declared ‘static’ but never defined [-Werror=unused-function] 1213 | static void sdhci_omap_context_save(struct sdhci_omap_host *omap_host); | ^~~~~~~~~~~~~~~~~~~~~~~ The referenced commit added an unrelated forward declaration of sdhci_omap_context_save(), which is unneeded in general, and unused when CONFIG_PM_SLEEP=n. Fixes: f433e8aac6b94218 ("mmc: sdhci-omap: Implement PM runtime functions") Reported-by: noreply@ellerman.id.au Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Link: https://lore.kernel.org/r/20211020083902.3669769-1-geert@linux-m68k.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
generated by cgit (git 2.34.1) at 2025-09-17 02:14:12 +0000