summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2021-11-01ibmvnic: don't stop queue in xmitSukadev Bhattiprolu
If adapter's resetting bit is on, discard the packet but don't stop the transmit queue - instead leave that to the reset code. With this change, it is possible that we may get several calls to ibmvnic_xmit() that simply discard packets and return. But if we stop the queue here, we might end up doing so just after __ibmvnic_open() started the queues (during a hard/soft reset) and before the ->resetting bit was cleared. If that happens, there will be no one to restart queue and transmissions will be blocked indefinitely. This can cause a TIMEOUT reset and with auto priority failover enabled, an unnecessary FAILOVER reset to less favored backing device and then a FAILOVER back to the most favored backing device. If we hit the window repeatedly, we can get stuck in a loop of TIMEOUT, FAILOVER, FAILOVER resets leaving the adapter unusable for extended periods of time. Fixes: 7f5b030830fe ("ibmvnic: Free skb's in cases of failure in transmit") Reported-by: Abdul Haleem <abdhalee@in.ibm.com> Reported-by: Vaishnavi Bhat <vaish123@in.ibm.com> Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com> Reviewed-by: Dany Madden <drt@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-01nfp: flower: Allow ipv6gretap interface for offloadingYu Xiao
The tunnel_type check only allows for "netif_is_gretap", but for OVS the port is actually "netif_is_ip6gretap" when setting up GRE for ipv6, which means offloading request was rejected before. Therefore, adding "netif_is_ip6gretap" allow ipv6gretap interface for offloading. Signed-off-by: Yu Xiao <yu.xiao@corigine.com> Signed-off-by: Louis Peens <louis.peens@corigine.com> Signed-off-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-01Merge branch '100GbE' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue Tony Nguyen says: ==================== 100GbE Intel Wired LAN Driver Updates 2021-10-29 This series contains updates to ice and iavf drivers and virtchnl header file. Brett removes vlan_promisc argument from a function call for ice driver. In the virtchnl header file he removes an unused, reserved define and converts raw value defines to instead use the BIT macro. Marcin adds syncing of MAC addresses when creating switchdev VFs to remove error messages on link up and stops showing buffer information for port representors to remove duplicated entries being displayed for ice driver. Karen introduces a helper to go from pci_dev to iavf_adapter in the iavf driver. Przemyslaw fixes an issue where iavf was attempting to free IRQs before calling disable. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-01Merge tag 'mlx5-updates-2021-10-29' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== mlx5-updates-2021-10-29 1) Minor trivial refactoring and improvements 2) Check for unsupported parameters fields in SW steering 3) Support TC offload for OVS internal port, from Ariel, see below. Ariel Levkovich says: ===================== Support HW offload of TC rules involving OVS internal port device type as the filter device or the destination device. The support is for flows which explicitly use the internal port as source or destination device as well as indirect offload for flows performing tunnel set or unset via a tunnel device and the internal port is the tunnel overlay device. Since flows with internal port as source port are added as egress rules while redirecting to internal port is done as an ingress redirect, the series introduces the necessary changes in mlx5_core driver to support the new types of flows and actions. ===================== ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-01RDMA/qed: Use helper function to set GUIDsKamal Heib
Use addrconf_addr_eui48() helper function to set the GUIDs and remove the driver specific version. Link: https://lore.kernel.org/r/20211031170743.81755-1-kamalheib1@gmail.com Signed-off-by: Kamal Heib <kamalheib1@gmail.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-11-01vdpa/mlx5: Forward only packets with allowed MAC addressEli Cohen
Add rules to forward packets to the net device's TIR only if the destination MAC is equal to the configured MAC. This is required to prevent the netdevice from receiving traffic not destined to its configured MAC. Signed-off-by: Eli Cohen <elic@nvidia.com> Reviewed-by: Parav Pandit <parav@nvidia.com> Link: https://lore.kernel.org/r/20211026175519.87795-9-parav@nvidia.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com>
2021-11-01vdpa/mlx5: Support configuration of MACEli Cohen
Add code to accept MAC configuration through vdpa tool. The MAC is written into the config struct and later can be retrieved through get_config(). Examples: 1. Configure MAC while adding a device: $ vdpa dev add mgmtdev pci/0000:06:00.2 name vdpa0 mac 00:11:22:33:44:55 2. Show configured params: $ vdpa dev config show vdpa0: mac 00:11:22:33:44:55 link down link_announce false max_vq_pairs 8 mtu 1500 Signed-off-by: Eli Cohen <elic@nvidia.com> Reviewed-by: Parav Pandit <parav@nvidia.com> Acked-by: Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/r/20211026175519.87795-8-parav@nvidia.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-11-01vdpa/mlx5: Fix clearing of VIRTIO_NET_F_MAC feature bitParav Pandit
Cited patch in the fixes tag clears the features bit during reset. mlx5 vdpa device feature bits are static decided by device capabilities. These feature bits (including VIRTIO_NET_F_MAC) are initialized during device addition time. Clearing features bit in reset callback cleared the VIRTIO_NET_F_MAC. Due to this, MAC address provided by the device is not honored. Fix it by not clearing the static feature bits during reset. Fixes: 0686082dbf7a ("vdpa: Add reset callback in vdpa_config_ops") Signed-off-by: Parav Pandit <parav@nvidia.com> Reviewed-by: Eli Cohen <elic@nvidia.com> Link: https://lore.kernel.org/r/20211026175519.87795-7-parav@nvidia.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com>
2021-11-01vdpa_sim_net: Enable user to set mac address and mtuParav Pandit
Enable user to set the mac address and mtu so that each vdpa device can have its own user specified mac address and mtu. Now that user is enabled to set the mac address, remove the module parameter for same. And example of setting mac addr and mtu and view the configuration: $ vdpa mgmtdev show vdpasim_net: supported_classes net $ vdpa dev add name bar mgmtdev vdpasim_net mac 00:11:22:33:44:55 mtu 9000 $ vdpa dev config show bar: mac 00:11:22:33:44:55 link up link_announce false mtu 9000 Signed-off-by: Parav Pandit <parav@nvidia.com> Reviewed-by: Eli Cohen <elic@nvidia.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Link: https://lore.kernel.org/r/20211026175519.87795-6-parav@nvidia.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-11-01vdpa: Enable user to set mac and mtu of vdpa deviceParav Pandit
$ vdpa dev add name bar mgmtdev vdpasim_net mac 00:11:22:33:44:55 mtu 9000 $ vdpa dev config show bar: mac 00:11:22:33:44:55 link up link_announce false mtu 9000 $ vdpa dev config show -jp { "config": { "bar": { "mac": "00:11:22:33:44:55", "link ": "up", "link_announce ": false, "mtu": 9000, } } } Signed-off-by: Parav Pandit <parav@nvidia.com> Reviewed-by: Eli Cohen <elic@nvidia.com> Acked-by: Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/r/20211026175519.87795-5-parav@nvidia.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
2021-11-01vdpa: Introduce query of device config layoutParav Pandit
Introduce a command to query a device config layout. An example query of network vdpa device: $ vdpa dev add name bar mgmtdev vdpasim_net $ vdpa dev config show bar: mac 00:35:09:19:48:05 link up link_announce false mtu 1500 $ vdpa dev config show -jp { "config": { "bar": { "mac": "00:35:09:19:48:05", "link ": "up", "link_announce ": false, "mtu": 1500, } } } Signed-off-by: Parav Pandit <parav@nvidia.com> Signed-off-by: Eli Cohen <elic@nvidia.com> Acked-by: Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/r/20211026175519.87795-3-parav@nvidia.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-11-01vdpa: Introduce and use vdpa device get, set config helpersParav Pandit
Subsequent patches enable get and set configuration either via management device or via vdpa device' config ops. This requires synchronization between multiple callers to get and set config callbacks. Features setting also influence the layout of the configuration fields endianness. To avoid exposing synchronization primitives to callers, introduce helper for setting the configuration and use it. Signed-off-by: Parav Pandit <parav@nvidia.com> Reviewed-by: Eli Cohen <elic@nvidia.com> Acked-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Link: https://lore.kernel.org/r/20211026175519.87795-2-parav@nvidia.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-11-01virtio-scsi: don't let virtio core to validate used buffer lengthJason Wang
We never tries to use used length, so the patch prevents the virtio core from validating used length. Signed-off-by: Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/r/20211027022107.14357-5-jasowang@redhat.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-11-01virtio-blk: don't let virtio core to validate used lengthJason Wang
We never tries to use used length, so the patch prevents the virtio core from validating used length. Signed-off-by: Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/r/20211027022107.14357-4-jasowang@redhat.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-11-01virtio-net: don't let virtio core to validate used lengthJason Wang
For RX virtuqueue, the used length is validated in all the three paths (big, small and mergeable). For control vq, we never tries to use used length. So this patch forbids the core to validate the used length. Signed-off-by: Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/r/20211027022107.14357-3-jasowang@redhat.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-11-01virtio_ring: validate used buffer lengthJason Wang
This patch validate the used buffer length provided by the device before trying to use it. This is done by record the in buffer length in a new field in desc_state structure during virtqueue_add(), then we can fail the virtqueue_get_buf() when we find the device is trying to give us a used buffer length which is greater than the in buffer length. Since some drivers have already done the validation by themselves, this patch tries to makes the core validation optional. For the driver that doesn't want the validation, it can set the suppress_used_validation to be true (which could be overridden by force_used_validation module parameter). To be more efficient, a dedicate array is used for storing the validate used length, this helps to eliminate the cache stress if validation is done by the driver. Signed-off-by: Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/r/20211027022107.14357-2-jasowang@redhat.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-11-01virtio_blk: correct types for status handlingMichael S. Tsirkin
virtblk_setup_cmd returns blk_status_t in an int, callers then assign it back to a blk_status_t variable. blk_status_t is either u32 or (more typically) u8 so it works, but is inelegant and causes sparse warnings. Pass the status in blk_status_t in a consistent way. Reported-by: kernel test robot <lkp@intel.com> Fixes: b2c5221fd074 ("virtio-blk: avoid preallocating big SGL for data") Cc: Max Gurtovoy <mgurtovoy@nvidia.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com>
2021-11-01virtio_blk: allow 0 as num_request_queuesMichael S. Tsirkin
The default value is 0 meaning "no limit". However if 0 is specified on the command line it is instead silently converted to 1. Further, the value is already validated at point of use, there's no point in duplicating code validating the value when it is set. Simplify the code while making the behaviour more consistent by using plain module_param. Fixes: 1a662cf6cb9a ("virtio-blk: add num_request_queues module parameter") Cc: Max Gurtovoy <mgurtovoy@nvidia.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-11-01i2c: virtio: Add support for zero-length requestsViresh Kumar
The virtio specification received a new mandatory feature (VIRTIO_I2C_F_ZERO_LENGTH_REQUEST) for zero length requests. Fail if the feature isn't offered by the device. For each read-request, set the VIRTIO_I2C_FLAGS_M_RD flag, as required by the VIRTIO_I2C_F_ZERO_LENGTH_REQUEST feature. This allows us to support zero length requests, like SMBUS Quick, where the buffer need not be sent anymore. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Link: https://lore.kernel.org/r/7c58868cd26d2fc4bd82d0d8b0dfb55636380110.1634808714.git.viresh.kumar@linaro.org Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jie Deng <jie.deng@intel.com> # once the spec is merged
2021-11-01virtio-blk: fixup coccinelle warningsYe Guojin
coccicheck complains about the use of snprintf() in sysfs show functions: WARNING use scnprintf or sprintf Use sysfs_emit instead of scnprintf or sprintf makes more sense. Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: Ye Guojin <ye.guojin@zte.com.cn> Link: https://lore.kernel.org/r/20211021065111.1047824-1-ye.guojin@zte.com.cn Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
2021-11-01virtio_ring: fix typos in vring_desc_extraJason Wang
We're actually tracking descriptor address and length instead of the buffer. Signed-off-by: Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/r/20211019070152.8236-7-jasowang@redhat.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-11-01virtio-pci: harden INTX interruptsJason Wang
This patch tries to make sure the virtio interrupt handler for INTX won't be called after a reset and before virtio_device_ready(). We can't use IRQF_NO_AUTOEN since we're using shared interrupt (IRQF_SHARED). So this patch tracks the INTX enabling status in a new intx_soft_enabled variable and toggle it during in vp_disable/enable_vectors(). The INTX interrupt handler will check intx_soft_enabled before processing the actual interrupt. Cc: Boqun Feng <boqun.feng@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paul E. McKenney <paulmck@kernel.org> Signed-off-by: Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/r/20211019070152.8236-6-jasowang@redhat.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-11-01virtio_pci: harden MSI-X interruptsJason Wang
We used to synchronize pending MSI-X irq handlers via synchronize_irq(), this may not work for the untrusted device which may keep sending interrupts after reset which may lead unexpected results. Similarly, we should not enable MSI-X interrupt until the device is ready. So this patch fixes those two issues by: 1) switching to use disable_irq() to prevent the virtio interrupt handlers to be called after the device is reset. 2) using IRQF_NO_AUTOEN and enable the MSI-X irq during .ready() This can make sure the virtio interrupt handler won't be called before virtio_device_ready() and after reset. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paul E. McKenney <paulmck@kernel.org> Signed-off-by: Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/r/20211019070152.8236-5-jasowang@redhat.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-11-01virtio_console: validate max_nr_ports before trying to use itJason Wang
We calculate nr_ports based on the max_nr_ports: nr_queues = use_multiport(portdev) ? (nr_ports + 1) * 2 : 2; If the device advertises a large max_nr_ports, we will end up with a integer overflow. Fixing this by validating the max_nr_ports and fail the probe for invalid max_nr_ports in this case. Cc: Amit Shah <amit@kernel.org> Signed-off-by: Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/r/20211019070152.8236-3-jasowang@redhat.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-11-01virtio_blk: Fix spelling mistake: "advertisted" -> "advertised"Colin Ian King
There is a spelling mistake in a dev_err error message. Fix it. Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Link: https://lore.kernel.org/r/20211025102240.22801-1-colin.i.king@gmail.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Max Gurtovoy <mgurtovoy@nvidia.com> Acked-by: Jason Wang <jasowang@redhat.com>
2021-11-01virtio-blk: validate num_queues during probeJason Wang
If an untrusted device neogitates BLK_F_MQ but advertises a zero num_queues, the driver may end up trying to allocating zero size buffers where ZERO_SIZE_PTR is returned which may pass the checking against the NULL. This will lead unexpected results. Fixing this by failing the probe in this case. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Stefan Hajnoczi <stefanha@redhat.com> Cc: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/r/20211019070152.8236-2-jasowang@redhat.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
2021-11-01virtio_ring: check desc == NULL when using indirect with packedXuan Zhuo
When using indirect with packed, we don't check for allocation failures. This patch checks that and fall back on direct. Fixes: 1ce9e6055fa0 ("virtio_ring: introduce packed ring support") Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Link: https://lore.kernel.org/r/20211020112323.67466-3-xuanzhuo@linux.alibaba.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-11-01virtio_ring: make virtqueue_add_indirect_packed prettierXuan Zhuo
Align the arguments of virtqueue_add_indirect_packed() to the open ( to make it look prettier. Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Acked-by: Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/r/20211020112323.67466-2-xuanzhuo@linux.alibaba.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-11-01hwrng: virtio - always add a pending requestLaurent Vivier
If we ensure we have already some data available by enqueuing again the buffer once data are exhausted, we can return what we have without waiting for the device answer. Signed-off-by: Laurent Vivier <lvivier@redhat.com> Link: https://lore.kernel.org/r/20211028101111.128049-5-lvivier@redhat.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-11-01hwrng: virtio - don't waste entropyLaurent Vivier
if we don't use all the entropy available in the buffer, keep it and use it later. Signed-off-by: Laurent Vivier <lvivier@redhat.com> Link: https://lore.kernel.org/r/20211028101111.128049-4-lvivier@redhat.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-11-01hwrng: virtio - don't wait on cleanupLaurent Vivier
When virtio-rng device was dropped by the hwrng core we were forced to wait the buffer to come back from the device to not have remaining ongoing operation that could spoil the buffer. But now, as the buffer is internal to the virtio-rng we can release the waiting loop immediately, the buffer will be retrieve and use when the virtio-rng driver will be selected again. This avoids to hang on an rng_current write command if the virtio-rng device is blocked by a lack of entropy. This allows to select another entropy source if the current one is empty. Signed-off-by: Laurent Vivier <lvivier@redhat.com> Link: https://lore.kernel.org/r/20211028101111.128049-3-lvivier@redhat.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-11-01hwrng: virtio - add an internal bufferLaurent Vivier
hwrng core uses two buffers that can be mixed in the virtio-rng queue. If the buffer is provided with wait=0 it is enqueued in the virtio-rng queue but unused by the caller. On the next call, core provides another buffer but the first one is filled instead and the new one queued. And the caller reads the data from the new one that is not updated, and the data in the first one are lost. To avoid this mix, virtio-rng needs to use its own unique internal buffer at a cost of a data copy to the caller buffer. Signed-off-by: Laurent Vivier <lvivier@redhat.com> Link: https://lore.kernel.org/r/20211028101111.128049-2-lvivier@redhat.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-11-01vdpa/mlx5: Propagate link status from device to vdpa driverEli Cohen
Add code to register to hardware asynchronous events. Use this mechanism to track link status events coming from the device and update the config struct. After doing link status change, call the vdpa callback to notify of the link status change. Signed-off-by: Eli Cohen <elic@nvidia.com> Link: https://lore.kernel.org/r/20210909123635.30884-4-elic@nvidia.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com>
2021-11-01vdpa/mlx5: Rename control VQ workqueue to vdpa wqEli Cohen
A subesequent patch will use the same workqueue for executing other work not related to control VQ. Rename the workqueue and the work queue entry used to convey information to the workqueue. Signed-off-by: Eli Cohen <elic@nvidia.com> Link: https://lore.kernel.org/r/20210909123635.30884-3-elic@nvidia.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com>
2021-11-01vdpa/mlx5: Remove mtu field from vdpa net deviceEli Cohen
No need to save the mtu int the net device struct. We can save it in the config struct which cannot be modified. Moreover, move the initialization to. mlx5_vdpa_set_features() callback is not the right place to put it. Signed-off-by: Eli Cohen <elic@nvidia.com> Link: https://lore.kernel.org/r/20210909123635.30884-2-elic@nvidia.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-11-01eni_vdpa: add vDPA driver for Alibaba ENIWu Zongyong
This patch adds a new vDPA driver for Alibaba ENI(Elastic Network Interface) which is build upon virtio 0.9.5 specification. And this driver is only enabled on X86 host currently. Link: https://lore.kernel.org/r/6a9f32c00609af16bbb2ea32e633b3beb1cbf84b.1635493219.git.wuzongyong@linux.alibaba.com Signed-off-by: Wu Zongyong <wuzongyong@linux.alibaba.com> Link: https://lore.kernel.org/r/20211026083214.3375383-1-arnd@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> # fix Kconfig typo Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-11-01vdpa: add new attribute VDPA_ATTR_DEV_MIN_VQ_SIZEWu Zongyong
This attribute advertises the min value of virtqueue size. The value is 1 by default. Signed-off-by: Wu Zongyong <wuzongyong@linux.alibaba.com> Link: https://lore.kernel.org/r/2bbc417355c4d22298050b1ba887cecfbde3e85d.1635493219.git.wuzongyong@linux.alibaba.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-11-01virtio_vdpa: setup correct vq size with callbacks get_vq_num_{max,min}Wu Zongyong
For the devices which implement the get_vq_num_min callback, the driver should not negotiate with virtqueue size with the backend vdpa device if the value returned by get_vq_num_min equals to the value returned by get_vq_num_max. This is useful for vdpa devices based on legacy virtio specfication. Signed-off-by: Wu Zongyong <wuzongyong@linux.alibaba.com> Link: https://lore.kernel.org/r/bc0551cec6c3f3dd9424b678b7c22d882aebab3a.1635493219.git.wuzongyong@linux.alibaba.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-11-01vdpa: min vq num of vdpa device cannot be greater than max vq numWu Zongyong
Just failed to probe the vdpa device if the min virtqueue num returned by get_vq_num_min is greater than the max virtqueue num returned by get_vq_num_max. Signed-off-by: Wu Zongyong <wuzongyong@linux.alibaba.com> Acked-by: Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/r/21199b62cc10b2a9f2cf90eeb63ad080645d881f.1635493219.git.wuzongyong@linux.alibaba.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-11-01vp_vdpa: add vq irq offloading supportWu Zongyong
This patch implements the get_vq_irq() callback for virtio pci devices to allow irq offloading. Signed-off-by: Wu Zongyong <wuzongyong@linux.alibaba.com> Acked-by: Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/r/bb091e5505db704dd620f8854a7aebc921d2a752.1635493219.git.wuzongyong@linux.alibaba.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-11-01virtio-pci: introduce legacy device moduleWu Zongyong
Split common codes from virtio-pci-legacy so vDPA driver can reuse it later. Signed-off-by: Wu Zongyong <wuzongyong@linux.alibaba.com> Acked-by: Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/r/71605acde5e97fcb2760a6973e406279fb1bbd33.1635493219.git.wuzongyong@linux.alibaba.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-11-01virtio-blk: add num_request_queues module parameterMax Gurtovoy
Sometimes a user would like to control the amount of request queues to be created for a block device. For example, for limiting the memory footprint of virtio-blk devices. Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com> Link: https://lore.kernel.org/r/20210902204622.54354-1-mgurtovoy@nvidia.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-11-01virtio-blk: avoid preallocating big SGL for dataMax Gurtovoy
No need to pre-allocate a big buffer for the IO SGL anymore. If a device has lots of deep queues, preallocation for the sg list can consume substantial amounts of memory. For HW virtio-blk device, nr_hw_queues can be 64 or 128 and each queue's depth might be 128. This means the resulting preallocation for the data SGLs is big. Switch to runtime allocation for SGL for lists longer than 2 entries. This is the approach used by NVMe drivers so it should be reasonable for virtio block as well. Runtime SGL allocation has always been the case for the legacy I/O path so this is nothing new. The preallocated small SGL depends on SG_CHAIN so if the ARCH doesn't support SG_CHAIN, use only runtime allocation for the SGL. Re-organize the setup of the IO request to fit the new sg chain mechanism. No performance degradation was seen (fio libaio engine with 16 jobs and 128 iodepth): IO size IOPs Rand Read (before/after) IOPs Rand Write (before/after) -------- --------------------------------- ---------------------------------- 512B 318K/316K 329K/325K 4KB 323K/321K 353K/349K 16KB 199K/208K 250K/275K 128KB 36K/36.1K 39.2K/41.7K Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com> Reviewed-by: Israel Rukshin <israelr@nvidia.com> Link: https://lore.kernel.org/r/20210901131434.31158-1-mgurtovoy@nvidia.com Reviewed-by: Feng Li <lifeng1519@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Tested-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de> # kconfig fixups Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-11-01virtio_net: clarify tailroom logicMichael S. Tsirkin
Make tailroom math follow same logic as everything else, subtracing values in the order in which things are laid out in the buffer. Tested-by: Corentin Noël <corentin.noel@collabora.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-10-31Merge branches 'apple/dart', 'arm/mediatek', 'arm/renesas', 'arm/smmu', ↵Joerg Roedel
'arm/tegra', 'iommu/fixes', 'x86/amd', 'x86/vt-d' and 'core' into next
2021-10-31Merge tag 'kvmarm-5.16' of ↵Paolo Bonzini
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD KVM/arm64 updates for Linux 5.16 - More progress on the protected VM front, now with the full fixed feature set as well as the limitation of some hypercalls after initialisation. - Cleanup of the RAZ/WI sysreg handling, which was pointlessly complicated - Fixes for the vgic placement in the IPA space, together with a bunch of selftests - More memcg accounting of the memory allocated on behalf of a guest - Timer and vgic selftests - Workarounds for the Apple M1 broken vgic implementation - KConfig cleanups - New kvmarm.mode=none option, for those who really dislike us
2021-10-30Merge tag 'scsi-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "Three small fixes, all in drivers, and one sizeable update to the UFS driver to remove the HPB 2.0 feature that has been objected to by Jens and Christoph. Although the UFS patch is large and last minute, it's essentially the least intrusive way of resolving the objections in time for the 5.15 release" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: ufs: ufshpb: Remove HPB2.0 flows scsi: mpt3sas: Fix reference tag handling for WRITE_INSERT scsi: ufs: ufs-exynos: Correct timeout value setting registers scsi: ibmvfc: Fix up duplicate response detection
2021-10-30Merge tag 'clk-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk fix from Stephen Boyd: "One fix for the composite clk that broke when we changed this clk type to use the determine_rate instead of round_rate clk op by default. This caused lots of problems on Rockchip SoCs because they heavily use the composite clk code to model the clk tree" * tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: clk: composite: Also consider .determine_rate for rate + mux composites
2021-10-30scsi: ufs: ufshpb: Remove HPB2.0 flowsAvri Altman
The Host Performance Buffer feature allows UFS read commands to carry the physical media addresses along with the LBAs, thus allowing less internal L2P-table switches in the device. HPB1.0 allowed a single LBA, while HPB2.0 increases this capacity up to 255 blocks. Carrying more than a single record, the read operation is no longer purely of type "read" but a "hybrid" command: Writing the physical address to the device in one operation and reading back the required payload in another. The JEDEC HPB spec defines two commands for this operation: HPB-WRITE-BUFFER (0x2) to write the physical addresses to device, and HPB-READ to read the payload. With the current HPB design the UFS driver has no alternative but to divide the READ request into 2 separate commands: HPB-WRITE-BUFFER and HPB-READ. This causes a great deal of aggravation to the block layer guys who demanded that we completely revert the entire HPB driver regardless of the huge amount of corporate effort already invested in it. As a compromise, remove only the pieces that implement the 2.0 specification. This is done as a matter of urgency for the final 5.15 release. Link: https://lore.kernel.org/r/20211030062301.248-1-avri.altman@wdc.com Tested-by: Avri Altman <avri.altman@wdc.com> Tested-by: Bean Huo <beanhuo@micron.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Bean Huo <beanhuo@micron.com> Co-developed-by: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Avri Altman <avri.altman@wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-10-30staging: r8188eu: hal: remove goto statement and local variableSaurav Girepunje
Remove the goto statement from FillH2CCmd_88E(). In this function goto can be replace by return statement. As on goto label exit, function only return it is not performing any cleanup. Avoiding goto will improve the function readability. After replacing the goto statement local variable ret is also not needed. So remove the ret local variable. Signed-off-by: Saurav Girepunje <saurav.girepunje@gmail.com> Link: https://lore.kernel.org/r/YXjXsChOpaTThkxT@Sauravs-Air.domain.name Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit (git 2.34.1) at 2025-09-11 12:44:36 +0000