summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2018-09-21Merge tag 'for-linus-20180920' of git://git.kernel.dk/linux-blockGreg Kroah-Hartman
Jens writes: "Storage fixes for 4.19-rc5 - Fix for leaking kernel pointer in floppy ioctl (Andy Whitcroft) - NVMe pull request from Christoph, and a single ANA log page fix (Hannes) - Regression fix for libata qd32 support, where we trigger an illegal active command transition. This fixes a CD-ROM detection issue that was reported, but could also trigger premature completion of the internal tag (me)" * tag 'for-linus-20180920' of git://git.kernel.dk/linux-block: floppy: Do not copy a kernel pointer to user memory in FDGETPRM ioctl libata: mask swap internal and hardware tag nvme: count all ANA groups for ANA Log page
2018-09-21drm/i915: Update DRIVER_DATE to 20180921Joonas Lahtinen
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2018-09-21Merge tag 'drm-fixes-2018-09-21' of git://anongit.freedesktop.org/drm/drmGreg Kroah-Hartman
David writes: "drm fixes for 4.19-rc5: - core: fix debugfs for atomic, fix the check for atomic for non-modesetting drivers - amdgpu: adds a new PCI id, some kfd fixes and a sdma fix - i915: a bunch of GVT fixes. - vc4: scaling fix - vmwgfx: modesetting fixes and a old buffer eviction fix - udl: framebuffer destruction fix - sun4i: disable on R40 fix until next kernel - pl111: NULL termination on table fix" * tag 'drm-fixes-2018-09-21' of git://anongit.freedesktop.org/drm/drm: (21 commits) drm/amdkfd: Fix ATS capablity was not reported correctly on some APUs drm/amdkfd: Change the control stack MTYPE from UC to NC on GFX9 drm/amdgpu: Fix SDMA HQD destroy error on gfx_v7 drm/vmwgfx: Fix buffer object eviction drm/vmwgfx: Don't impose STDU limits on framebuffer size drm/vmwgfx: limit mode size for all display unit to texture_max drm/vmwgfx: limit screen size to stdu_max during check_modeset drm/vmwgfx: don't check for old_crtc_state enable status drm/amdgpu: add new polaris pci id drm: sun4i: drop second PLL from A64 HDMI PHY drm: fix drm_drv_uses_atomic_modeset on non modesetting drivers. drm/i915/gvt: clear ggtt entries when destroy vgpu drm/i915/gvt: request srcu_read_lock before checking if one gfn is valid drm/i915/gvt: Add GEN9_CLKGATE_DIS_4 to default BXT mmio handler drm/i915/gvt: Init PHY related registers for BXT drm/atomic: Use drm_drv_uses_atomic_modeset() for debugfs creation drm/fb-helper: Remove set but not used variable 'connector_funcs' drm: udl: Destroy framebuffer only if it was initialized drm/sun4i: Remove R40 display pipeline compatibles drm/pl111: Make sure of_device_id tables are NULL terminated ...
2018-09-20r8169: fix autoneg issue on resume with RTL8168EHeiner Kallweit
It was reported that chip version 33 (RTL8168E) ends up with 10MBit/Half on a 1GBit link after resuming from S3 (with different link partners). For whatever reason the PHY on this chip doesn't properly start a renegotiation when soft-reset. Explicitly requesting a renegotiation fixes this. Fixes: a2965f12fde6 ("r8169: remove rtl8169_set_speed_xmii") Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reported-by: Neil MacLeod <neil@nmacleod.com> Tested-by: Neil MacLeod <neil@nmacleod.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-20scsi: lpfc: Synchronize access to remoteport via rportJames Smart
The driver currently uses the ndlp to get the local rport which is then used to get the nvme transport remoteport pointer. There can be cases where a stale remoteport pointer is obtained as synchronization isn't done through the different dereferences. Correct by using locks to synchronize the dereferences. Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-09-20scsi: ufs: Disable blk-mq for nowAdrian Hunter
blk-mq does not support runtime pm, so disable blk-mq support for now. Fixes: d5038a13eca7 ("scsi: core: switch to scsi-mq by default") Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-09-20IB/hfi1: Fix destroy_qp hang after a link downMichael J. Ruhl
rvt_destroy_qp() cannot complete until all in process packets have been released from the underlying hardware. If a link down event occurs, an application can hang with a kernel stack similar to: cat /proc/<app PID>/stack quiesce_qp+0x178/0x250 [hfi1] rvt_reset_qp+0x23d/0x400 [rdmavt] rvt_destroy_qp+0x69/0x210 [rdmavt] ib_destroy_qp+0xba/0x1c0 [ib_core] nvme_rdma_destroy_queue_ib+0x46/0x80 [nvme_rdma] nvme_rdma_free_queue+0x3c/0xd0 [nvme_rdma] nvme_rdma_destroy_io_queues+0x88/0xd0 [nvme_rdma] nvme_rdma_error_recovery_work+0x52/0xf0 [nvme_rdma] process_one_work+0x17a/0x440 worker_thread+0x126/0x3c0 kthread+0xcf/0xe0 ret_from_fork+0x58/0x90 0xffffffffffffffff quiesce_qp() waits until all outstanding packets have been freed. This wait should be momentary. During a link down event, the cleanup handling does not ensure that all packets caught by the link down are flushed properly. This is caused by the fact that the freeze path and the link down event is handled the same. This is not correct. The freeze path waits until the HFI is unfrozen and then restarts PIO. A link down is not a freeze event. The link down path cannot restart the PIO until link is restored. If the PIO path is restarted before the link comes up, the application (QP) using the PIO path will hang (until link is restored). Fix by separating the linkdown path from the freeze path and use the link down path for link down events. Close a race condition sc_disable() by acquiring both the progress and release locks. Close a race condition in sc_stop() by moving the setting of the flag bits under the alloc lock. Cc: <stable@vger.kernel.org> # 4.9.x+ Fixes: 7724105686e7 ("IB/hfi1: add driver files") Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-09-20IB/hfi1: Fix context recovery when PBC has an UnsupportedVLMichael J. Ruhl
If a packet stream uses an UnsupportedVL (virtual lane), the send engine will not send the packet, and it will not indicate that an error has occurred. This will cause the packet stream to block. HFI has 8 virtual lanes available for packet streams. Each lane can be enabled or disabled using the UnsupportedVL mask. If a lane is disabled, adding a packet to the send context must be disallowed. The current mask for determining unsupported VLs defaults to 0 (allow all). This is incorrect. Only the VLs that are defined should be allowed. Determine which VLs are disabled (mtu == 0), and set the appropriate unsupported bit in the mask. The correct mask will allow the send engine to error on the invalid VL, and error recovery will work correctly. Cc: <stable@vger.kernel.org> # 4.9.x+ Fixes: 7724105686e7 ("IB/hfi1: add driver files") Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Reviewed-by: Lukasz Odzioba <lukasz.odzioba@intel.com> Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-09-20IB/hfi1: Invalid user input can result in crashMichael J. Ruhl
If the number of packets in a user sdma request does not match the actual iovectors being sent, sdma_cleanup can be called on an uninitialized request structure, resulting in a crash similar to this: BUG: unable to handle kernel NULL pointer dereference at 0000000000000008 IP: [<ffffffffc0ae8bb7>] __sdma_txclean+0x57/0x1e0 [hfi1] PGD 8000001044f61067 PUD 1052706067 PMD 0 Oops: 0000 [#1] SMP CPU: 30 PID: 69912 Comm: upsm Kdump: loaded Tainted: G OE ------------ 3.10.0-862.el7.x86_64 #1 Hardware name: Intel Corporation S2600KPR/S2600KPR, BIOS SE5C610.86B.01.01.0019.101220160604 10/12/2016 task: ffff8b331c890000 ti: ffff8b2ed1f98000 task.ti: ffff8b2ed1f98000 RIP: 0010:[<ffffffffc0ae8bb7>] [<ffffffffc0ae8bb7>] __sdma_txclean+0x57/0x1e0 [hfi1] RSP: 0018:ffff8b2ed1f9bab0 EFLAGS: 00010286 RAX: 0000000000008b2b RBX: ffff8b2adf6e0000 RCX: 0000000000000000 RDX: 00000000000000a0 RSI: ffff8b2e9eedc540 RDI: ffff8b2adf6e0000 RBP: ffff8b2ed1f9bad8 R08: 0000000000000000 R09: ffffffffc0b04a06 R10: ffff8b331c890190 R11: ffffe6ed00bf1840 R12: ffff8b3315480000 R13: ffff8b33154800f0 R14: 00000000fffffff2 R15: ffff8b2e9eedc540 FS: 00007f035ac47740(0000) GS:ffff8b331e100000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000008 CR3: 0000000c03fe6000 CR4: 00000000001607e0 Call Trace: [<ffffffffc0b0570d>] user_sdma_send_pkts+0xdcd/0x1990 [hfi1] [<ffffffff9fe75fb0>] ? gup_pud_range+0x140/0x290 [<ffffffffc0ad3105>] ? hfi1_mmu_rb_insert+0x155/0x1b0 [hfi1] [<ffffffffc0b0777b>] hfi1_user_sdma_process_request+0xc5b/0x11b0 [hfi1] [<ffffffffc0ac193a>] hfi1_aio_write+0xba/0x110 [hfi1] [<ffffffffa001a2bb>] do_sync_readv_writev+0x7b/0xd0 [<ffffffffa001bede>] do_readv_writev+0xce/0x260 [<ffffffffa022b089>] ? tty_ldisc_deref+0x19/0x20 [<ffffffffa02268c0>] ? n_tty_ioctl+0xe0/0xe0 [<ffffffffa001c105>] vfs_writev+0x35/0x60 [<ffffffffa001c2bf>] SyS_writev+0x7f/0x110 [<ffffffffa051f7d5>] system_call_fastpath+0x1c/0x21 Code: 06 49 c7 47 18 00 00 00 00 0f 87 89 01 00 00 5b 41 5c 41 5d 41 5e 41 5f 5d c3 66 2e 0f 1f 84 00 00 00 00 00 48 8b 4e 10 48 89 fb <48> 8b 51 08 49 89 d4 83 e2 0c 41 81 e4 00 e0 00 00 48 c1 ea 02 RIP [<ffffffffc0ae8bb7>] __sdma_txclean+0x57/0x1e0 [hfi1] RSP <ffff8b2ed1f9bab0> CR2: 0000000000000008 There are two exit points from user_sdma_send_pkts(). One (free_tx) merely frees the slab entry and one (free_txreq) cleans the sdma_txreq prior to freeing the slab entry. The free_txreq variation can only be called after one of the sdma_init*() variations has been called. In the panic case, the slab entry had been allocated but not inited. Fix the issue by exiting through free_tx thus avoiding sdma_clean(). Cc: <stable@vger.kernel.org> # 4.9.x+ Fixes: 7724105686e7 ("IB/hfi1: add driver files") Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Reviewed-by: Lukasz Odzioba <lukasz.odzioba@intel.com> Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-09-20IB/hfi1: Fix SL array bounds checkIra Weiny
The SL specified by a user needs to be a valid SL. Add a range check to the user specified SL value which protects from running off the end of the SL to SC table. CC: stable@vger.kernel.org Fixes: 7724105686e7 ("IB/hfi1: add driver files") Signed-off-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-09-21Merge branch 'drm-next-4.20' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie
into drm-next This is a new pull for drm-next on top of last weeks with the following changes: - Fixed 64 bit divide - Fixed vram type on vega20 - Misc vega20 fixes - Misc DC fixes - Fix GDS/GWS/OA domain handling Previous changes from last week: amdgpu/kfd: - Picasso (new APU) support - Raven2 (new APU) support - Vega20 enablement - ACP powergating improvements - Add ABGR/XBGR display support - VCN JPEG engine support - Initial xGMI support - Use load balancing for engine scheduling - Lots of new documentation - Rework and clean up i2c and aux handling in DC - Add DP YCbCr 4:2:0 support in DC - Add DMCU firmware loading for Raven (used for ABM and PSR) - New debugfs features in DC - LVDS support in DC - Implement wave kill for gfx/compute (light weight reset for shaders) - Use AGP aperture to avoid gart mappings when possible - GPUVM performance improvements - Bulk moves for more efficient GPUVM LRU handling - Merge amdgpu and amdkfd into one module - Enable gfxoff and stutter mode on Raven - Misc cleanups Scheduler: - Load balancing support - Bug fixes ttm: - Bulk move functionality - Bug fixes radeon: - Misc cleanups Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexdeucher@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180920150438.12693-1-alexander.deucher@amd.com
2018-09-21Merge branch 'drm-fixes-4.19' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie
into drm-fixes A few fixes for 4.19: - Add a new polaris pci id - KFD fixes for raven and gfx7 Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexdeucher@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180920155850.5455-1-alexander.deucher@amd.com
2018-09-20RDMA/uverbs: Fix validity check for modify QPMajd Dibbiny
Uverbs shouldn't enforce QP state in the command unless the user set the QP state bit in the attribute mask. In addition, only copy qp attr fields which have the corresponding bit set in the attribute mask over to the internal attr structure. Fixes: 88de869bbe4f ("RDMA/uverbs: Ensure validity of current QP state value") Fixes: bc38a6abdd5a ("[PATCH] IB uverbs: core implementation") Signed-off-by: Majd Dibbiny <majd@mellanox.com> Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-09-20PCI: dwc: Fix scheduling while atomic issuesJisheng Zhang
When programming the inbound/outbound ATUs, we call usleep_range() after each checking PCIE_ATU_ENABLE bit. Unfortunately, the ATU programming can be executed in atomic context: inbound ATU programming could be called through pci_epc_write_header() =>dw_pcie_ep_write_header() =>dw_pcie_prog_inbound_atu() outbound ATU programming could be called through pci_bus_read_config_dword() =>dw_pcie_rd_conf() =>dw_pcie_prog_outbound_atu() Fix this issue by calling mdelay() instead. Fixes: f8aed6ec624f ("PCI: dwc: designware: Add EP mode support") Fixes: d8bbeb39fbf3 ("PCI: designware: Wait for iATU enable") Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com> [lorenzo.pieralisi@arm.com: commit log update] Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
2018-09-20drm/i915/execlists: Onion unwind for logical_ring_init() failureChris Wilson
Fix up the error unwind for logical_ring_init() failing by moving the cleanup into the callers who own the various bits of state during initialisation, so we don't forget to free the state allocated by the caller. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180920195948.16448-1-chris@chris-wilson.co.uk
2018-09-20drm/i915: Park the GPU on module loadChris Wilson
Once we have flushed the first request through the system to both load a context and record the default state; tell the GPU to park and idle itself, putting itself immediately (hopefully at least) into a powersaving state, and allowing ourselves to start from known state after setting up all our bookkeeping. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180920161343.1117-1-chris@chris-wilson.co.uk
2018-09-20bnxt_en: don't try to offload VLAN 'modify' actionDavide Caratti
bnxt offload code currently supports only 'push' and 'pop' operation: let .ndo_setup_tc() return -EOPNOTSUPP if VLAN 'modify' action is configured. Fixes: 2ae7408fedfe ("bnxt_en: bnxt: add TC flower filter offload support") Signed-off-by: Davide Caratti <dcaratti@redhat.com> Acked-by: Sathya Perla <sathya.perla@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-20regulator: fix crash caused by null driver dataYu Zhao
dev_set_drvdata() needs to be called before device_register() exposes device to userspace. Otherwise kernel crashes after it gets null pointer from dev_get_drvdata() when userspace tries to access sysfs entries. [Removed backtrace for length -- broonie] Signed-off-by: Yu Zhao <yuzhao@google.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
2018-09-20drm/i915/selftests: Live tests emit requests and so require rpmChris Wilson
As we emit requests or touch HW directly for some of the live tests, the requirement is that we hold the rpm wakeref before doing so. We want a mix of granularity since we will want to test runtime suspend, so try to mark up only the critical sections where we need rpm for the live test. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108002 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180920144934.16611-1-chris@chris-wilson.co.uk
2018-09-20drm/i915: pass dev_priv to i915_gem_cleanup_stolenMatthew Auld
It really wants dev_priv anyway, also now matches i915_gem_init_stolen. Signed-off-by: Matthew Auld <matthew.auld@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20180920142707.19659-2-matthew.auld@intel.com
2018-09-20drm/i915: don't assume struct page in i915_sg_trimMatthew Auld
If we copy all the contents of the sg across and not just the page link, we can then also put it to work in fake_get_huge_pages and beyond. Signed-off-by: Matthew Auld <matthew.auld@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20180920142707.19659-1-matthew.auld@intel.com
2018-09-20drm/amdkfd: Fix ATS capablity was not reported correctly on some APUsYong Zhao
Because CRAT_CU_FLAGS_IOMMU_PRESENT was not set in some BIOS crat, we need to workaround this. For future compatibility, we also overwrite the bit in capability according to the value of needs_iommu_device. Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Yong Zhao <Yong.Zhao@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-09-20drm/amdkfd: Change the control stack MTYPE from UC to NC on GFX9Yong Zhao
CWSR fails on Raven if the control stack is MTYPE_UC, which is used for regular GART mappings. As a workaround we map it using MTYPE_NC. The MEC firmware expects the control stack at one page offset from the start of the MQD so it is part of the MQD allocation on GFXv9. AMDGPU added a memory allocation flag just for this purpose. Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Yong Zhao <yong.zhao@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-09-20drm/amdgpu: Fix SDMA HQD destroy error on gfx_v7Amber Lin
A wrong register bit was examinated for checking SDMA status so it reports false failures. This typo only appears on gfx_v7. gfx_v8 checks the correct bit. Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Amber Lin <Amber.Lin@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-09-20pinctrl: intel: Do pin translation in other GPIO operations as wellMika Westerberg
For some reason I thought GPIOLIB handles translation from GPIO ranges to pinctrl pins but it turns out not to be the case. This means that when GPIOs operations are performed for a pin controller having a custom GPIO base such as Cannon Lake and Ice Lake incorrect pin number gets used internally. Fix this in the same way we did for lock/unlock IRQ operations and translate the GPIO number to pin before using it. Fixes: a60eac3239f0 ("pinctrl: intel: Allow custom GPIO base for pad groups") Reported-by: Rajat Jain <rajatja@google.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Tested-by: Rajat Jain <rajatja@google.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-09-20Merge branch 'nvme-4.19' of git://git.infradead.org/nvme into for-linusJens Axboe
Pull NVMe fix from Christoph. * 'nvme-4.19' of git://git.infradead.org/nvme: nvme: count all ANA groups for ANA Log page
2018-09-20floppy: Do not copy a kernel pointer to user memory in FDGETPRM ioctlAndy Whitcroft
The final field of a floppy_struct is the field "name", which is a pointer to a string in kernel memory. The kernel pointer should not be copied to user memory. The FDGETPRM ioctl copies a floppy_struct to user memory, including this "name" field. This pointer cannot be used by the user and it will leak a kernel address to user-space, which will reveal the location of kernel code and data and undermine KASLR protection. Model this code after the compat ioctl which copies the returned data to a previously cleared temporary structure on the stack (excluding the name pointer) and copy out to userspace from there. As we already have an inparam union with an appropriate member and that memory is already cleared even for read only calls make use of that as a temporary store. Based on an initial patch by Brian Belleville. CVE-2018-7755 Signed-off-by: Andy Whitcroft <apw@canonical.com> Broke up long line. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-09-20mlxsw: spectrum: Bump required firmware versionPetr Machata
MC-aware mode was introduced to mlxsw in commit 7b8195306694 ("mlxsw: spectrum: Configure MC-aware mode on mlxsw ports") and fixed up later in commit 3a3539cd3632 ("mlxsw: spectrum_buffers: Set up a dedicated pool for BUM traffic"). As the final piece of puzzle, a firmware issue whereby a wrong priority was assigned to BUM traffic was corrected in FW version 13.1703.4. Therefore require this FW version in the driver. Fixes: 7b8195306694 ("mlxsw: spectrum: Configure MC-aware mode on mlxsw ports") Signed-off-by: Petr Machata <petrm@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-20libata: mask swap internal and hardware tagJens Axboe
hen we're comparing the hardware completion mask passed in from the driver with the internal tag pending mask, we need to account for the fact that the internal tag is different from the hardware tag. If not, then we can end up either prematurely completing the internal tag (since it's not set in the hw mask), or simply flag an error: ata2: illegal qc_active transition (100000000->00000001) If the internal tag is set, then swap that with the hardware tag in this case before comparing with what the hardware reports. Fixes: 28361c403683 ("libata: add extra internal command") Buglink: https://bugzilla.kernel.org/show_bug.cgi?id=201151 Cc: stable@vger.kernel.org Reported-by: Paul Sbarra <sbarra.paul@gmail.com> Tested-by: Paul Sbarra <sbarra.paul@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-09-20drm/atomic: Initialise planes with opaque alpha valuesKieran Bingham
Planes without an alpha property, using __drm_atomic_helper_plane_reset will have their plane state alpha initialised as zero, which represents a transparent alpha. If this value is then used for the plane, it may not be visible by default, and thus doesn't represent a good initialisation state. Update the default state->alpha value to DRM_BLEND_ALPHA_OPAQUE unconditionally when the plane is reset. Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Alexandru Gheorghe <alexandru-cosmin.gheorghe@arm.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Alexandru Gheorghe <alexandru-cosmin.gheorghe@arm.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180919155700.10342-2-kieran.bingham+renesas@ideasonboard.com
2018-09-20serial: imx: restore handshaking irq for imx1Uwe Kleine-König
Back in 2015 when irda was dropped from the driver imx1 was broken. This change reintroduces the support for the third interrupt of the UART. Fixes: afe9cbb1a6ad ("serial: imx: drop support for IRDA") Cc: stable <stable@vger.kernel.org> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Leonard Crestez <leonard.crestez@nxp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-20drm/i915/guc: Restore preempt-context across S3/S4Chris Wilson
Stolen memory is lost across S4 (hibernate) or S3-RST as it is a portion of ordinary volatile RAM. As we allocate our rings from stolen, this may include the rings used for our preempt context and their breadcrumb instructions. In order to allow preemption following hibernation and loss of stolen memory, we therefore need to repopulate the instructions inside the lost ring upon resume. To handle both module load and resume, we simply defer constructing the ring to first use. Testcase: igt/drv_selftest/live_gem Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Michał Winiarski <michal.winiarski@intel.com> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Reviewed-by: Michał Winiarski <michal.winiarski@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180919205432.18394-1-chris@chris-wilson.co.uk
2018-09-20drm/i915/selftests: Basic stress test for rapid context switchingChris Wilson
We need to exercise the HW and submission paths for switching contexts rapidly to check that features such as execlists' wa_tail are adequate. Plus it's an interesting baseline latency metric. v2: Check the initial request for allocation errors v3: Use finite waits for more robust handling of broken code Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180920105809.1872-1-chris@chris-wilson.co.uk
2018-09-20usb: typec: mux: Take care of driver module reference countingHeikki Krogerus
Functions typec_mux_get() and typec_switch_get() already make sure that the mux device reference count is incremented, but the same must be done to the driver module as well to prevent the drivers from being unloaded in the middle of operation. This fixes a potential "BUG: unable to handle kernel paging request at ..." from happening. Fixes: 93dd2112c7b2 ("usb: typec: mux: Get the mux identifier from function parameter") Acked-by: Hans de Goede <hdegoede@redhat.com> Tested-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-20usb: core: safely deal with the dynamic quirk listsHarry Pan
Applying dynamic usbcore quirks in early booting when the slab is not yet ready would cause kernel panic of null pointer dereference because the quirk_count has been counted as 1 while the quirk_list was failed to allocate. i.e., [ 1.044970] BUG: unable to handle kernel NULL pointer dereference at (null) [ 1.044995] IP: [<ffffffffb0953ec7>] usb_detect_quirks+0x88/0xd1 [ 1.045016] PGD 0 [ 1.045026] Oops: 0000 [#1] PREEMPT SMP [ 1.046986] gsmi: Log Shutdown Reason 0x03 [ 1.046995] Modules linked in: [ 1.047008] CPU: 0 PID: 81 Comm: kworker/0:3 Not tainted 4.4.154 #28 [ 1.047016] Hardware name: Google Coral/Coral, BIOS Google_Coral.10068.27.0 12/04/2017 [ 1.047028] Workqueue: usb_hub_wq hub_event [ 1.047037] task: ffff88017a321c80 task.stack: ffff88017a384000 [ 1.047044] RIP: 0010:[<ffffffffb0953ec7>] [<ffffffffb0953ec7>] usb_detect_quirks+0x88/0xd1 To tackle this odd, let's balance the quirk_count to 0 when the kcalloc call fails, and defer the quirk setting into a lower level callback which ensures that the kernel memory management has been initialized. Fixes: 027bd6cafd9a ("usb: core: Add "quirks" parameter for usbcore") Signed-off-by: Harry Pan <harry.pan@intel.com> Acked-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-20usb: roles: Take care of driver module reference countingHeikki Krogerus
This fixes potential "BUG: unable to handle kernel paging request at ..." from happening. Fixes: fde0aa6c175a ("usb: common: Small class for USB role switches") Cc: <stable@vger.kernel.org> Acked-by: Hans de Goede <hdegoede@redhat.com> Tested-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-20USB: handle NULL config in usb_find_alt_setting()Alan Stern
usb_find_alt_setting() takes a pointer to a struct usb_host_config as an argument; it searches for an interface with specified interface and alternate setting numbers in that config. However, it crashes if the usb_host_config pointer argument is NULL. Since this is a general-purpose routine, available for use in many places, we want to to be more robust. This patch makes it return NULL whenever the config argument is NULL. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-by: syzbot+19c3aaef85a89d451eac@syzkaller.appspotmail.com CC: <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-20USB: fix error handling in usb_driver_claim_interface()Alan Stern
The syzbot fuzzing project found a use-after-free bug in the USB core. The bug was caused by usbfs not unbinding from an interface when the USB device file was closed, which led another process to attempt the unbind later on, after the private data structure had been deallocated. The reason usbfs did not unbind the interface at the appropriate time was because it thought the interface had never been claimed in the first place. This was caused by the fact that usb_driver_claim_interface() does not clean up properly when device_bind_driver() returns an error. Although the error code gets passed back to the caller, the iface->dev.driver pointer remains set and iface->condition remains equal to USB_INTERFACE_BOUND. This patch adds proper error handling to usb_driver_claim_interface(). Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-by: syzbot+f84aa7209ccec829536f@syzkaller.appspotmail.com CC: <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-20USB: remove LPM management from usb_driver_claim_interface()Alan Stern
usb_driver_claim_interface() disables and re-enables Link Power Management, but it shouldn't do either one, for the reasons listed below. This patch removes the two LPM-related function calls from the routine. The reason for disabling LPM in the analogous function usb_probe_interface() is so that drivers won't have to deal with unwanted LPM transitions in their probe routine. But usb_driver_claim_interface() doesn't call the driver's probe routine (or any other callbacks), so that reason doesn't apply here. Furthermore, no driver other than usbfs will ever call usb_driver_claim_interface() unless it is already bound to another interface in the same device, which means disabling LPM here would be redundant. usbfs doesn't interact with LPM at all. Lastly, the error return from usb_unlocked_disable_lpm() isn't handled properly; the code doesn't clean up its earlier actions before returning. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Fixes: 8306095fd2c1 ("USB: Disable USB 3.0 LPM in critical sections.") CC: <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-20USB: usbdevfs: restore warning for nonsensical flagsOliver Neukum
If we filter flags before they reach the core we need to generate our own warnings. Signed-off-by: Oliver Neukum <oneukum@suse.com> Fixes: 0cb54a3e47cb ("USB: debugging code shouldn't alter control flow") Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-20USB: usbdevfs: sanitize flags moreOliver Neukum
Requesting a ZERO_PACKET or not is sensible only for output. In the input direction the device decides. Likewise accepting short packets makes sense only for input. This allows operation with panic_on_warn without opening up a local DOS. Signed-off-by: Oliver Neukum <oneukum@suse.com> Reported-by: syzbot+843efa30c8821bd69f53@syzkaller.appspotmail.com Fixes: 0cb54a3e47cb ("USB: debugging code shouldn't alter control flow") Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-20Revert "usb: cdc-wdm: Fix a sleep-in-atomic-context bug in ↵Sebastian Andrzej Siewior
service_outstanding_interrupt()" This reverts commit 6e22e3af7bb3a7b9dc53cb4687659f6e63fca427. The bug the patch describes to, has been already fixed in commit 2df6948428542 ("USB: cdc-wdm: don't enable interrupts in USB-giveback") so need to this, revert it. Fixes: 6e22e3af7bb3 ("usb: cdc-wdm: Fix a sleep-in-atomic-context bug in service_outstanding_interrupt()") Cc: stable <stable@vger.kernel.org> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-20usb: musb: dsps: do not disable CPPI41 irq in driver teardownBin Liu
TI AM335x CPPI 4.1 module uses a single register bit for CPPI interrupts in both musb controllers. So disabling the CPPI irq in one musb driver breaks the other musb module. Since musb is already disabled before tearing down dma controller in musb_remove(), it is safe to not disable CPPI irq in musb_dma_controller_destroy(). Fixes: 255348289f71 ("usb: musb: dsps: Manage CPPI 4.1 DMA interrupt in DSPS") Cc: stable@vger.kernel.org Signed-off-by: Bin Liu <b-liu@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-20drm/i915/selftests: Free the batch along the contexts error pathChris Wilson
Remember to release the batch bo reference if we hit an error trying to submit our MI_STORE_DWORD_IMM. References: https://bugs.freedesktop.org/show_bug.cgi?id=107979 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180919195544.1511-9-chris@chris-wilson.co.uk
2018-09-20Merge tag 'mtd/fixes-for-4.19-rc5' of git://git.infradead.org/linux-mtdGreg Kroah-Hartman
Boris writes: "- Fixes a bug in the ->read/write_reg() implementation of the m25p80 driver - Make sure of_node_get/put() calls are balanced in the partition parsing code - Fix a race in the denali NAND controller driver - Fix false positive WARN_ON() in the marvell NAND controller driver" * tag 'mtd/fixes-for-4.19-rc5' of git://git.infradead.org/linux-mtd: mtd: devices: m25p80: Make sure the buffer passed in op is DMA-able mtd: partitions: fix unbalanced of_node_get/put() mtd: rawnand: denali: fix a race condition when DMA is kicked mtd: rawnand: marvell: prevent harmless warnings
2018-09-20gpu/drm/exynos: Convert drm_atomic_helper_suspend/resume()Souptick Joarder
convert drm_atomic_helper_suspend/resume() to use drm_mode_config_helper_suspend/resume(). exynos_drm_fbdev_suspend/resume can be removed as drm_mode_config_helper_suspend/resume has implement the same in generic way. Remove suspend_state from exynos_drm_private struct as it is no more useful. Signed-off-by: Ajit Negi <ajitn.linux@gmail.com> Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2018-09-20drm/exynos: enable out_bridge in exynos_dsi_enableMaciej Purski
As the out bridge will not be enabled directly by the framework, it should be enabled by DSI. exynos_dsi_enable() should handle a case, when there is an out_bridge connected as a DSI peripheral. Changed in v5: - fixed error path in exynos_dsi_enable Signed-off-by: Maciej Purski <m.purski@samsung.com> [ a.hajda@samsung.com: v5 ] Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2018-09-20drm/exynos: move connector creation to attach callbackMaciej Purski
The current implementation assumes that the only possible peripheral device for DSIM is a panel. Using an output bridge child device should also be possible. If an output bridge is available, don't create a new connector. Instead, call drm_bridge_attach() and set encoder's bridge to NULL in order to avoid an out bridge from being visible by the framework, as the DSI bus needs control on enabling its child output bridge. Such sequence is required by Toshiba TC358764 bridge, which is a DSI peripheral bridge device. changed in v5: - detach bridge in mipi_dsi detach callback Signed-off-by: Maciej Purski <m.purski@samsung.com> [ a.hajda@samsung.com: v5 ] Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Manually merged due to merge conflict. Signed-off-by: Inki Dae <inki.dae@samsung.com>
2018-09-20drm/exynos: rename bridge_node to in_bridge_nodeMaciej Purski
Driver uses bridge_node to refer to bridge on input side of DSI. Since we want to add support for bridges on output side lets add "in" prefix to avoid confusion with out bridges. Changes in v5: - replace mic_ prefix with in_ Signed-off-by: Maciej Purski <m.purski@samsung.com> [ a.hajda@samsuung.com: v5 ] Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2018-09-20Merge tag 'sound-4.19-rc5' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Takashi writes: "sound fixes for 4.19-rc5 here comes a collection of various fixes, mostly for stable-tree or regression fixes. Two relatively high LOCs are about the (rather simple) conversion of uapi integer types in topology API, and a regression fix about HDMI hotplug notification on AMD HD-audio. The rest are all small individual fixes like ASoC Intel Skylake race condition, minor uninitialized page leak in emu10k1 ioctl, Firewire audio error paths, and so on." * tag 'sound-4.19-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (33 commits) ALSA: fireworks: fix memory leak of response buffer at error path ALSA: oxfw: fix memory leak of discovered stream formats at error path ALSA: oxfw: fix memory leak for model-dependent data at error path ALSA: bebob: fix memory leak for M-Audio FW1814 and ProjectMix I/O at error path ALSA: hda - Enable runtime PM only for discrete GPU ALSA: oxfw: fix memory leak of private data ALSA: firewire-tascam: fix memory leak of private data ALSA: firewire-digi00x: fix memory leak of private data sound: don't call skl_init_chip() to reset intel skl soc sound: enable interrupt after dma buffer initialization Revert "ASoC: Intel: Skylake: Acquire irq after RIRB allocation" ALSA: emu10k1: fix possible info leak to userspace on SNDRV_EMU10K1_IOCTL_INFO ASoC: cs4265: fix MMTLR Data switch control ASoC: AMD: Ensure reset bit is cleared before configuring ALSA: fireface: fix memory leak in ff400_switch_fetching_mode() ALSA: bebob: use address returned by kmalloc() instead of kernel stack for streaming DMA mapping ASoC: rsnd: don't fallback to PIO mode when -EPROBE_DEFER ASoC: rsnd: adg: care clock-frequency size ASoC: uniphier: change status to orphan ASoC: rsnd: fixup not to call clk_get/set under non-atomic ...
generated by cgit (git 2.34.1) at 2025-09-17 07:36:25 +0000