| Age | Commit message (Collapse) | Author |
|---|
|
Pull drm fixes from Dave Airlie:
"Pretty quiet week, just some amdgpu and i915 fixes.
i915:
- deadlock fix
- gvt fixes
amdgpu:
- PCIE dpm feature fix
- Powerplay fixes"
* tag 'drm-fixes-2019-04-05' of git://anongit.freedesktop.org/drm/drm:
drm/i915/gvt: Fix kerneldoc typo for intel_vgpu_emulate_hotplug
drm/i915/gvt: Correct the calculation of plane size
drm/amdgpu: remove unnecessary rlc reset function on gfx9
drm/i915: Always backoff after a drm_modeset_lock() deadlock
drm/i915/gvt: do not let pin count of shadow mm go negative
drm/i915/gvt: do not deliver a workload if its creation fails
drm/amd/display: VBIOS can't be light up HDMI when restart system
drm/amd/powerplay: fix possible hang with 3+ 4K monitors
drm/amd/powerplay: correct data type to avoid overflow
drm/amd/powerplay: add ECC feature bit
drm/amd/amdgpu: fix PCIe dpm feature issue (v3)
|
|
Pull networking fixes from David Miller:
1) Several hash table refcount fixes in batman-adv, from Sven
Eckelmann.
2) Use after free in bpf_evict_inode(), from Daniel Borkmann.
3) Fix mdio bus registration in ixgbe, from Ivan Vecera.
4) Unbounded loop in __skb_try_recv_datagram(), from Paolo Abeni.
5) ila rhashtable corruption fix from Herbert Xu.
6) Don't allow upper-devices to be added to vrf devices, from Sabrina
Dubroca.
7) Add qmi_wwan device ID for Olicard 600, from Bjørn Mork.
8) Don't leave skb->next poisoned in __netif_receive_skb_list_ptype,
from Alexander Lobakin.
9) Missing IDR checks in mlx5 driver, from Aditya Pakki.
10) Fix false connection termination in ktls, from Jakub Kicinski.
11) Work around some ASPM issues with r8169 by disabling rx interrupt
coalescing on certain chips. From Heiner Kallweit.
12) Properly use per-cpu qstat values on NOLOCK qdiscs, from Paolo
Abeni.
13) Fully initialize sockaddr_in structures in SCTP, from Xin Long.
14) Various BPF flow dissector fixes from Stanislav Fomichev.
15) Divide by zero in act_sample, from Davide Caratti.
16) Fix bridging multicast regression introduced by rhashtable
conversion, from Nikolay Aleksandrov.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (106 commits)
ibmvnic: Fix completion structure initialization
ipv6: sit: reset ip header pointer in ipip6_rcv
net: bridge: always clear mcast matching struct on reports and leaves
libcxgb: fix incorrect ppmax calculation
vlan: conditional inclusion of FCoE hooks to match netdevice.h and bnx2x
sch_cake: Make sure we can write the IP header before changing DSCP bits
sch_cake: Use tc_skb_protocol() helper for getting packet protocol
tcp: Ensure DCTCP reacts to losses
net/sched: act_sample: fix divide by zero in the traffic path
net: thunderx: fix NULL pointer dereference in nicvf_open/nicvf_stop
net: hns: Fix sparse: some warnings in HNS drivers
net: hns: Fix WARNING when remove HNS driver with SMMU enabled
net: hns: fix ICMP6 neighbor solicitation messages discard problem
net: hns: Fix probabilistic memory overwrite when HNS driver initialized
net: hns: Use NAPI_POLL_WEIGHT for hns driver
net: hns: fix KASAN: use-after-free in hns_nic_net_xmit_hw()
flow_dissector: rst'ify documentation
ipv6: Fix dangling pointer when ipv6 fragment
net-gro: Fix GRO flush when receiving a GSO packet.
flow_dissector: document BPF flow dissector environment
...
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for 5.2:
UAPI Changes:
-syncobj: Add TIMELINE_WAIT|QUERY|TRANSFER|TIMELINE_SIGNAL ioctls (Chunming)
-Clarify that 1.0 can be represented by drm_color_lut (Daniel)
Cross-subsystem Changes:
-dt-bindings: Add binding for rk3066 hdmi (Johan)
-dt-bindings: Add binding for Feiyang FY07024DI26A30-D panel (Jagan)
-dt-bindings: Add Rocktech vendor prefix and jh057n00900 panel bindings (Guido)
-MAINTAINERS: Add lima and ASPEED entries (Joel & Qiang)
Core Changes:
-memory: use dma_alloc_coherent when mem encryption is active (Christian)
-dma_buf: add support for a dma_fence chain (Christian)
-shmem_gem: fix off-by-one bug in new shmem gem helpers (Dan)
Driver Changes:
-rockchip: Add support for rk3066 hdmi (Johan)
-ASPEED: Add driver supporting ASPEED BMC display controller to drm (Joel)
-lima: Add driver supporting Arm Mali4xx gpus to drm (Qiang)
-vc4/v3d: Various cleanups and improved error handling (Eric)
-panel: Add support for Feiyang FY07024DI26A30-D MIPI-DSI panel (Jagan)
-panel: Add support for Rocktech jh057n00900 MIPI-DSI panel (Guido)
Cc: Johan Jonker <jbx6244@gmail.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Chunming Zhou <david1.zhou@amd.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Eric Anholt <eric@anholt.net>
Cc: Qiang Yu <yuq825@gmail.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Cc: Guido Günther <agx@sigxcpu.org>
Cc: Joel Stanley <joel@jms.id.au>
[airlied: fixed XA limit build breakage, Rodrigo also submitted the same patch, but
I squashed it in the merge.]
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Sean Paul <sean@poorly.run>
Link: https://patchwork.freedesktop.org/patch/msgid/20190404201016.GA139524@art_vandelay
|
|
Fix device initialization completion handling for vNIC adapters.
Initialize the completion structure on probe and reinitialize when needed.
This also fixes a race condition during kdump where the driver can attempt
to access the completion struct before it is initialized:
Unable to handle kernel paging request for data at address 0x00000000
Faulting instruction address: 0xc0000000081acbe0
Oops: Kernel access of bad area, sig: 11 [#1]
LE SMP NR_CPUS=2048 NUMA pSeries
Modules linked in: ibmvnic(+) ibmveth sunrpc overlay squashfs loop
CPU: 19 PID: 301 Comm: systemd-udevd Not tainted 4.18.0-64.el8.ppc64le #1
NIP: c0000000081acbe0 LR: c0000000081ad964 CTR: c0000000081ad900
REGS: c000000027f3f990 TRAP: 0300 Not tainted (4.18.0-64.el8.ppc64le)
MSR: 800000010280b033 <SF,VEC,VSX,EE,FP,ME,IR,DR,RI,LE,TM[E]> CR: 28228288 XER: 00000006
CFAR: c000000008008934 DAR: 0000000000000000 DSISR: 40000000 IRQMASK: 1
GPR00: c0000000081ad964 c000000027f3fc10 c0000000095b5800 c0000000221b4e58
GPR04: 0000000000000003 0000000000000001 000049a086918581 00000000000000d4
GPR08: 0000000000000007 0000000000000000 ffffffffffffffe8 d0000000014dde28
GPR12: c0000000081ad900 c000000009a00c00 0000000000000001 0000000000000100
GPR16: 0000000000000038 0000000000000007 c0000000095e2230 0000000000000006
GPR20: 0000000000400140 0000000000000001 c00000000910c880 0000000000000000
GPR24: 0000000000000000 0000000000000006 0000000000000000 0000000000000003
GPR28: 0000000000000001 0000000000000001 c0000000221b4e60 c0000000221b4e58
NIP [c0000000081acbe0] __wake_up_locked+0x50/0x100
LR [c0000000081ad964] complete+0x64/0xa0
Call Trace:
[c000000027f3fc10] [c000000027f3fc60] 0xc000000027f3fc60 (unreliable)
[c000000027f3fc60] [c0000000081ad964] complete+0x64/0xa0
[c000000027f3fca0] [d0000000014dad58] ibmvnic_handle_crq+0xce0/0x1160 [ibmvnic]
[c000000027f3fd50] [d0000000014db270] ibmvnic_tasklet+0x98/0x130 [ibmvnic]
[c000000027f3fda0] [c00000000813f334] tasklet_action_common.isra.3+0xc4/0x1a0
[c000000027f3fe00] [c000000008cd13f4] __do_softirq+0x164/0x400
[c000000027f3fef0] [c00000000813ed64] irq_exit+0x184/0x1c0
[c000000027f3ff20] [c0000000080188e8] __do_irq+0xb8/0x210
[c000000027f3ff90] [c00000000802d0a4] call_do_irq+0x14/0x24
[c000000026a5b010] [c000000008018adc] do_IRQ+0x9c/0x130
[c000000026a5b060] [c000000008008ce4] hardware_interrupt_common+0x114/0x120
Signed-off-by: Thomas Falcon <tlfalcon@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix up the intel_pstate driver after recent changes to prevent
it from printing pointless messages and update the turbostat utility
(mostly fixes and new hardware support).
Specifics:
- Make intel_pstate only load on Intel processors and prevent it from
printing pointless failure messages (Borislav Petkov).
- Update the turbostat utility:
* Assorted fixes (Ben Hutchings, Len Brown, Prarit Bhargava).
* Support for AMD Fam 17h (Zen) RAPL and package power (Calvin
Walton).
* Support for Intel Icelake and for systems with more than one die
per package (Len Brown).
* Cleanups (Len Brown)"
* tag 'pm-5.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq/intel_pstate: Load only on Intel hardware
tools/power turbostat: update version number
tools/power turbostat: Warn on bad ACPI LPIT data
tools/power turbostat: Add checks for failure of fgets() and fscanf()
tools/power turbostat: Also read package power on AMD F17h (Zen)
tools/power turbostat: Add support for AMD Fam 17h (Zen) RAPL
tools/power turbostat: Do not display an error on systems without a cpufreq driver
tools/power turbostat: Add Die column
tools/power turbostat: Add Icelake support
tools/power turbostat: Cleanup CNL-specific code
tools/power turbostat: Cleanup CC3-skip code
tools/power turbostat: Restore ability to execute in topology-order
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fix from Rafael Wysocki:
"Prevent stale GPE events from triggering spurious system wakeups from
suspend-to-idle (Furquan Shaikh)"
* tag 'acpi-5.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPICA: Clear status of GPEs before enabling them
|
|
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
Only one fix for DSC (backoff after drm_modeset_lock deadlock)
and GVT's fixes including vGPU display plane size calculation,
shadow mm pin count, error recovery path for workload create
and one kerneldoc fix.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190404161116.GA14522@intel.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull mfd fixes from Lee Jones:
- Fix failed reads due to enabled IRQs when suspended; twl-core
- Fix driver registration when using DT; sprd-sc27xx-spi
- Fix `make allyesconfig` on x86_64; SUN6I_PRCM
* tag 'mfd-fixes-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd:
mfd: sun6i-prcm: Allow to compile with COMPILE_TEST
mfd: sc27xx: Use SoC compatible string for PMIC devices
mfd: twl-core: Disable IRQ while suspended
|
|
into drm-fixes
Fixes for 5.1:
- Fix for pcie dpm
- Powerplay fixes for vega20
- Fix vbios display on reboot if driver display state is retained
- Gfx9 resume robustness fix
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190404042939.3386-1-alexander.deucher@amd.com
|
|
BITS_TO_LONGS() uses DIV_ROUND_UP() because of
this ppmax value can be greater than available
per cpu page pods.
This patch removes BITS_TO_LONGS() to fix this
issue.
Signed-off-by: Varun Prakash <varun@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In function do_write_buffer(), in the for loop, there is a case
chip_ready() returns 1 while chip_good() returns 0, so it never
break the loop.
To fix this, chip_good() is enough and it should timeout if it stay
bad for a while.
Fixes: dfeae1073583("mtd: cfi_cmdset_0002: Change write buffer to check correct value")
Signed-off-by: Yi Huaijie <yihuaijie@huawei.com>
Signed-off-by: Liu Jian <liujian56@huawei.com>
Reviewed-by: Tokunori Ikegami <ikegami_to@yahoo.co.jp>
Signed-off-by: Richard Weinberger <richard@nod.at>
|
|
* acpica:
ACPICA: Clear status of GPEs before enabling them
|
|
The call to of_find_matching_node_and_match returns a node pointer with
refcount incremented thus it must be explicitly decremented after the
last usage.
Detected by coccinelle with the following warnings:
drivers/gpu/drm/pl111/pl111_versatile.c:333:3-9: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 317, but without a corresponding object release within this function.
drivers/gpu/drm/pl111/pl111_versatile.c:340:3-9: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 317, but without a corresponding object release within this function.
drivers/gpu/drm/pl111/pl111_versatile.c:346:3-9: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 317, but without a corresponding object release within this function.
drivers/gpu/drm/pl111/pl111_versatile.c:354:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 317, but without a corresponding object release within this function.
drivers/gpu/drm/pl111/pl111_versatile.c:395:3-9: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 317, but without a corresponding object release within this function.
drivers/gpu/drm/pl111/pl111_versatile.c:402:1-7: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 317, but without a corresponding object release within this function.
Signed-off-by: Wen Yang <wen.yang99@zte.com.cn>
Cc: Eric Anholt <eric@anholt.net> (supporter:DRM DRIVER FOR ARM PL111 CLCD)
Cc: David Airlie <airlied@linux.ie> (maintainer:DRM DRIVERS)
Cc: Daniel Vetter <daniel@ffwll.ch> (maintainer:DRM DRIVERS)
Cc: dri-devel@lists.freedesktop.org (open list:DRM DRIVERS)
Cc: linux-kernel@vger.kernel.org (open list)
Signed-off-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/1554307455-40361-6-git-send-email-wen.yang99@zte.com.cn
|
|
Fixes: c9be804c8c7a ("drm/vc4: Use common helpers for debugfs setup by the driver components.")
Signed-off-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20190403213629.GA31570@lkp-ib03
|
|
Storage devices which report supporting discard commands like
WRITE_SAME_16 with unmap, but reject discard commands sent to the
storage device. This is a clear storage firmware bug but it doesn't
change the fact that should a program cause discards to be sent to a
multipath device layered on this buggy storage, all paths can end up
failed at the same time from the discards, causing possible I/O loss.
The first discard to a path will fail with Illegal Request, Invalid
field in cdb, e.g.:
kernel: sd 8:0:8:19: [sdfn] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
kernel: sd 8:0:8:19: [sdfn] tag#0 Sense Key : Illegal Request [current]
kernel: sd 8:0:8:19: [sdfn] tag#0 Add. Sense: Invalid field in cdb
kernel: sd 8:0:8:19: [sdfn] tag#0 CDB: Write same(16) 93 08 00 00 00 00 00 a0 08 00 00 00 80 00 00 00
kernel: blk_update_request: critical target error, dev sdfn, sector 10487808
The SCSI layer converts this to the BLK_STS_TARGET error number, the sd
device disables its support for discard on this path, and because of the
BLK_STS_TARGET error multipath fails the discard without failing any
path or retrying down a different path. But subsequent discards can
cause path failures. Any discards sent to the path which already failed
a discard ends up failing with EIO from blk_cloned_rq_check_limits with
an "over max size limit" error since the discard limit was set to 0 by
the sd driver for the path. As the error is EIO, this now fails the
path and multipath tries to send the discard down the next path. This
cycle continues as discards are sent until all paths fail.
Fix this by training DM core to disable DISCARD if the underlying
storage already did so.
Also, fix branching in dm_done() and clone_endio() to reflect the
mutually exclussive nature of the IO operations in question.
Cc: stable@vger.kernel.org
Reported-by: David Jeffery <djeffery@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
When a bpf program is uploaded, the driver computes the number of
xdp tx queues resulting in the allocation of additional qsets.
Starting from commit '2ecbe4f4a027 ("net: thunderx: replace global
nicvf_rx_mode_wq work queue for all VFs to private for each of them")'
the driver runs link state polling for each VF resulting in the
following NULL pointer dereference:
[ 56.169256] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000020
[ 56.178032] Mem abort info:
[ 56.180834] ESR = 0x96000005
[ 56.183877] Exception class = DABT (current EL), IL = 32 bits
[ 56.189792] SET = 0, FnV = 0
[ 56.192834] EA = 0, S1PTW = 0
[ 56.195963] Data abort info:
[ 56.198831] ISV = 0, ISS = 0x00000005
[ 56.202662] CM = 0, WnR = 0
[ 56.205619] user pgtable: 64k pages, 48-bit VAs, pgdp = 0000000021f0c7a0
[ 56.212315] [0000000000000020] pgd=0000000000000000, pud=0000000000000000
[ 56.219094] Internal error: Oops: 96000005 [#1] SMP
[ 56.260459] CPU: 39 PID: 2034 Comm: ip Not tainted 5.1.0-rc3+ #3
[ 56.266452] Hardware name: GIGABYTE R120-T33/MT30-GS1, BIOS T49 02/02/2018
[ 56.273315] pstate: 80000005 (Nzcv daif -PAN -UAO)
[ 56.278098] pc : __ll_sc___cmpxchg_case_acq_64+0x4/0x20
[ 56.283312] lr : mutex_lock+0x2c/0x50
[ 56.286962] sp : ffff0000219af1b0
[ 56.290264] x29: ffff0000219af1b0 x28: ffff800f64de49a0
[ 56.295565] x27: 0000000000000000 x26: 0000000000000015
[ 56.300865] x25: 0000000000000000 x24: 0000000000000000
[ 56.306165] x23: 0000000000000000 x22: ffff000011117000
[ 56.311465] x21: ffff800f64dfc080 x20: 0000000000000020
[ 56.316766] x19: 0000000000000020 x18: 0000000000000001
[ 56.322066] x17: 0000000000000000 x16: ffff800f2e077080
[ 56.327367] x15: 0000000000000004 x14: 0000000000000000
[ 56.332667] x13: ffff000010964438 x12: 0000000000000002
[ 56.337967] x11: 0000000000000000 x10: 0000000000000c70
[ 56.343268] x9 : ffff0000219af120 x8 : ffff800f2e077d50
[ 56.348568] x7 : 0000000000000027 x6 : 000000062a9d6a84
[ 56.353869] x5 : 0000000000000000 x4 : ffff800f2e077480
[ 56.359169] x3 : 0000000000000008 x2 : ffff800f2e077080
[ 56.364469] x1 : 0000000000000000 x0 : 0000000000000020
[ 56.369770] Process ip (pid: 2034, stack limit = 0x00000000c862da3a)
[ 56.376110] Call trace:
[ 56.378546] __ll_sc___cmpxchg_case_acq_64+0x4/0x20
[ 56.383414] drain_workqueue+0x34/0x198
[ 56.387247] nicvf_open+0x48/0x9e8 [nicvf]
[ 56.391334] nicvf_open+0x898/0x9e8 [nicvf]
[ 56.395507] nicvf_xdp+0x1bc/0x238 [nicvf]
[ 56.399595] dev_xdp_install+0x68/0x90
[ 56.403333] dev_change_xdp_fd+0xc8/0x240
[ 56.407333] do_setlink+0x8e0/0xbe8
[ 56.410810] __rtnl_newlink+0x5b8/0x6d8
[ 56.414634] rtnl_newlink+0x54/0x80
[ 56.418112] rtnetlink_rcv_msg+0x22c/0x2f8
[ 56.422199] netlink_rcv_skb+0x60/0x120
[ 56.426023] rtnetlink_rcv+0x28/0x38
[ 56.429587] netlink_unicast+0x1c8/0x258
[ 56.433498] netlink_sendmsg+0x1b4/0x350
[ 56.437410] sock_sendmsg+0x4c/0x68
[ 56.440887] ___sys_sendmsg+0x240/0x280
[ 56.444711] __sys_sendmsg+0x68/0xb0
[ 56.448275] __arm64_sys_sendmsg+0x2c/0x38
[ 56.452361] el0_svc_handler+0x9c/0x128
[ 56.456186] el0_svc+0x8/0xc
[ 56.459056] Code: 35ffff91 2a1003e0 d65f03c0 f9800011 (c85ffc10)
[ 56.465166] ---[ end trace 4a57fdc27b0a572c ]---
[ 56.469772] Kernel panic - not syncing: Fatal exception
Fix it by checking nicvf_rx_mode_wq pointer in nicvf_open and nicvf_stop
Fixes: 2ecbe4f4a027 ("net: thunderx: replace global nicvf_rx_mode_wq work queue for all VFs to private for each of them")
Fixes: 2c632ad8bc74 ("net: thunderx: move link state polling function to VF")
Reported-by: Matteo Croce <mcroce@redhat.com>
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Tested-by: Matteo Croce <mcroce@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
There are some sparse warnings in the HNS drivers:
warning: incorrect type in assignment (different address spaces)
expected void [noderef] <asn:2> *io_base
got void *vaddr
warning: cast removes address space '<asn:2>' of expression
[...]
Add __iomem and change all the u8 __iomem to void __iomem to
fix these kind of warnings.
warning: incorrect type in argument 1 (different address spaces)
expected void [noderef] <asn:2> *base
got unsigned char [usertype] *base_addr
warning: cast to restricted __le16
warning: incorrect type in assignment (different base types)
expected unsigned int [usertype] tbl_tcam_data_high
got restricted __le32 [usertype]
warning: cast to restricted __le32
[...]
These variables used u32/u16 as their type, and finally as a
parameter of writel(), writel() will do the cpu_to_le32 coversion
so remove the little endian covert code to fix these kind of warnings.
Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When enable SMMU, remove HNS driver will cause a WARNING:
[ 141.924177] WARNING: CPU: 36 PID: 2708 at drivers/iommu/dma-iommu.c:443 __iommu_dma_unmap+0xc0/0xc8
[ 141.954673] Modules linked in: hns_enet_drv(-)
[ 141.963615] CPU: 36 PID: 2708 Comm: rmmod Tainted: G W 5.0.0-rc1-28723-gb729c57de95c-dirty #32
[ 141.983593] Hardware name: Huawei D05/D05, BIOS Hisilicon D05 UEFI Nemo 1.8 RC0 08/31/2017
[ 142.000244] pstate: 60000005 (nZCv daif -PAN -UAO)
[ 142.009886] pc : __iommu_dma_unmap+0xc0/0xc8
[ 142.018476] lr : __iommu_dma_unmap+0xc0/0xc8
[ 142.027066] sp : ffff000013533b90
[ 142.033728] x29: ffff000013533b90 x28: ffff8013e6983600
[ 142.044420] x27: 0000000000000000 x26: 0000000000000000
[ 142.055113] x25: 0000000056000000 x24: 0000000000000015
[ 142.065806] x23: 0000000000000028 x22: ffff8013e66eee68
[ 142.076499] x21: ffff8013db919800 x20: 0000ffffefbff000
[ 142.087192] x19: 0000000000001000 x18: 0000000000000007
[ 142.097885] x17: 000000000000000e x16: 0000000000000001
[ 142.108578] x15: 0000000000000019 x14: 363139343a70616d
[ 142.119270] x13: 6e75656761705f67 x12: 0000000000000000
[ 142.129963] x11: 00000000ffffffff x10: 0000000000000006
[ 142.140656] x9 : 1346c1aa88093500 x8 : ffff0000114de4e0
[ 142.151349] x7 : 6662666578303d72 x6 : ffff0000105ffec8
[ 142.162042] x5 : 0000000000000000 x4 : 0000000000000000
[ 142.172734] x3 : 00000000ffffffff x2 : ffff0000114de500
[ 142.183427] x1 : 0000000000000000 x0 : 0000000000000035
[ 142.194120] Call trace:
[ 142.199030] __iommu_dma_unmap+0xc0/0xc8
[ 142.206920] iommu_dma_unmap_page+0x20/0x28
[ 142.215335] __iommu_unmap_page+0x40/0x60
[ 142.223399] hnae_unmap_buffer+0x110/0x134
[ 142.231639] hnae_free_desc+0x6c/0x10c
[ 142.239177] hnae_fini_ring+0x14/0x34
[ 142.246540] hnae_fini_queue+0x2c/0x40
[ 142.254080] hnae_put_handle+0x38/0xcc
[ 142.261619] hns_nic_dev_remove+0x54/0xfc [hns_enet_drv]
[ 142.272312] platform_drv_remove+0x24/0x64
[ 142.280552] device_release_driver_internal+0x17c/0x20c
[ 142.291070] driver_detach+0x4c/0x90
[ 142.298259] bus_remove_driver+0x5c/0xd8
[ 142.306148] driver_unregister+0x2c/0x54
[ 142.314037] platform_driver_unregister+0x10/0x18
[ 142.323505] hns_nic_dev_driver_exit+0x14/0xf0c [hns_enet_drv]
[ 142.335248] __arm64_sys_delete_module+0x214/0x25c
[ 142.344891] el0_svc_common+0xb0/0x10c
[ 142.352430] el0_svc_handler+0x24/0x80
[ 142.359968] el0_svc+0x8/0x7c0
[ 142.366104] ---[ end trace 60ad1cd58e63c407 ]---
The tx ring buffer map when xmit and unmap when xmit done. So in
hnae_init_ring() did not map tx ring buffer, but in hnae_fini_ring()
have a unmap operation for tx ring buffer, which is already unmapped
when xmit done, than cause this WARNING.
The hnae_alloc_buffers() is called in hnae_init_ring(),
so the hnae_free_buffers() should be in hnae_fini_ring(), not in
hnae_free_desc().
In hnae_fini_ring(), adds a check is_rx_ring() as in hnae_init_ring().
When the ring buffer is tx ring, adds a piece of code to ensure that
the tx ring is unmap.
Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
ICMP6 neighbor solicitation messages will be discard by the Hip06
chips, because of not setting forwarding pool. Enable promisc mode
has the same problem.
This patch fix the wrong forwarding table configs for the multicast
vague matching when enable promisc mode, and add forwarding pool
for the forwarding table.
Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When reboot the system again and again, may cause a memory
overwrite.
[ 15.638922] systemd[1]: Reached target Swap.
[ 15.667561] tun: Universal TUN/TAP device driver, 1.6
[ 15.676756] Bridge firewalling registered
[ 17.344135] Unable to handle kernel paging request at virtual address 0000000200000040
[ 17.352179] Mem abort info:
[ 17.355007] ESR = 0x96000004
[ 17.358105] Exception class = DABT (current EL), IL = 32 bits
[ 17.364112] SET = 0, FnV = 0
[ 17.367209] EA = 0, S1PTW = 0
[ 17.370393] Data abort info:
[ 17.373315] ISV = 0, ISS = 0x00000004
[ 17.377206] CM = 0, WnR = 0
[ 17.380214] user pgtable: 4k pages, 48-bit VAs, pgdp = (____ptrval____)
[ 17.386926] [0000000200000040] pgd=0000000000000000
[ 17.391878] Internal error: Oops: 96000004 [#1] SMP
[ 17.396824] CPU: 23 PID: 95 Comm: kworker/u130:0 Tainted: G E 4.19.25-1.2.78.aarch64 #1
[ 17.414175] Hardware name: Huawei TaiShan 2280 /BC11SPCD, BIOS 1.54 08/16/2018
[ 17.425615] Workqueue: events_unbound async_run_entry_fn
[ 17.435151] pstate: 00000005 (nzcv daif -PAN -UAO)
[ 17.444139] pc : __mutex_lock.isra.1+0x74/0x540
[ 17.453002] lr : __mutex_lock.isra.1+0x3c/0x540
[ 17.461701] sp : ffff000100d9bb60
[ 17.469146] x29: ffff000100d9bb60 x28: 0000000000000000
[ 17.478547] x27: 0000000000000000 x26: ffff802fb8945000
[ 17.488063] x25: 0000000000000000 x24: ffff802fa32081a8
[ 17.497381] x23: 0000000000000002 x22: ffff801fa2b15220
[ 17.506701] x21: ffff000009809000 x20: ffff802fa23a0888
[ 17.515980] x19: ffff801fa2b15220 x18: 0000000000000000
[ 17.525272] x17: 0000000200000000 x16: 0000000200000000
[ 17.534511] x15: 0000000000000000 x14: 0000000000000000
[ 17.543652] x13: ffff000008d95db8 x12: 000000000000000d
[ 17.552780] x11: ffff000008d95d90 x10: 0000000000000b00
[ 17.561819] x9 : ffff000100d9bb90 x8 : ffff802fb89d6560
[ 17.570829] x7 : 0000000000000004 x6 : 00000004a1801d05
[ 17.579839] x5 : 0000000000000000 x4 : 0000000000000000
[ 17.588852] x3 : ffff802fb89d5a00 x2 : 0000000000000000
[ 17.597734] x1 : 0000000200000000 x0 : 0000000200000000
[ 17.606631] Process kworker/u130:0 (pid: 95, stack limit = 0x(____ptrval____))
[ 17.617438] Call trace:
[ 17.623349] __mutex_lock.isra.1+0x74/0x540
[ 17.630927] __mutex_lock_slowpath+0x24/0x30
[ 17.638602] mutex_lock+0x50/0x60
[ 17.645295] drain_workqueue+0x34/0x198
[ 17.652623] __sas_drain_work+0x7c/0x168
[ 17.659903] sas_drain_work+0x60/0x68
[ 17.666947] hisi_sas_scan_finished+0x30/0x40 [hisi_sas_main]
[ 17.676129] do_scsi_scan_host+0x70/0xb0
[ 17.683534] do_scan_async+0x20/0x228
[ 17.690586] async_run_entry_fn+0x4c/0x1d0
[ 17.697997] process_one_work+0x1b4/0x3f8
[ 17.705296] worker_thread+0x54/0x470
Every time the call trace is not the same, but the overwrite address
is always the same:
Unable to handle kernel paging request at virtual address 0000000200000040
The root cause is, when write the reg XGMAC_MAC_TX_LF_RF_CONTROL_REG,
didn't use the io_base offset.
Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When the HNS driver loaded, always have an error print:
"netif_napi_add() called with weight 256"
This is because the kernel checks the NAPI polling weights
requested by drivers and it prints an error message if a driver
requests a weight bigger than 64.
So use NAPI_POLL_WEIGHT to fix it.
Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch is trying to fix the issue due to:
[27237.844750] BUG: KASAN: use-after-free in hns_nic_net_xmit_hw+0x708/0xa18[hns_enet_drv]
After hnae_queue_xmit() in hns_nic_net_xmit_hw(), can be
interrupted by interruptions, and than call hns_nic_tx_poll_one()
to handle the new packets, and free the skb. So, when turn back to
hns_nic_net_xmit_hw(), calling skb->len will cause use-after-free.
This patch update tx ring statistics in hns_nic_tx_poll_one() to
fix the bug.
Signed-off-by: Liubin Shu <shuliubin@huawei.com>
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
These were missing '\n' terminations, add them.
Signed-off-by: Joe Perches <joe@perches.com>
Reviewed-by: Guido Günther <agx@sigxcpu.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/da6f2344396555034cf2476c8338b0ce1c56e0a7.camel@perches.com
|
|
The below commits added dummy files to test that certain headers are
self-contained, i.e. compilable as standalone units:
39e2f501c1b4 ("drm/i915: Split struct intel_context definition to its own header")
3a891a626794 ("drm/i915: Move intel_engine_mask_t around for use by i915_request_types.h")
8b74594aa455 ("drm/i915: Split out i915_priolist_types into its own header")
The idea is fine, but the implementation is a bit tedious and
inflexible, and does not really scale well.
Implement the same in make using autogenerated dummy sources to include
the headers.
v2 by Chris:
- Use patsubst
- Add .gitignore
- Add clean-files for generated dummy sources
v3 by Jani:
- Fix make clean
- Add the tests to i915-y instead of extra-y
v4 by Jani:
- quiet_cmd whitespace fix
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190403135236.8398-1-jani.nikula@intel.com
|
|
Need to check for invalid profile mode settings before determining
to switch to that.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
the member sdr_white_level of struct dc_cursor_attributes was not
initialized, then the random value result that
dcn10_set_cursor_sdr_white_level() set error hw_scale value 0x20D9(normal
value is 0x3c00), this cause the black cursor issue.
[how]
just initilize the obj of struct dc_cursor_attributes to zero to avoid
the random value.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Tianci Yin <tianci.yin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
shadow_list
amdgpu_bo_restore_shadow would assign zero to r if succeeded.
r would remain zero if there is only one node in shadow_list.
current code would always return failure when r <= 0.
restart the timeout for each wait was a rather problematic bug as well.
The value of tmo SHOULD be changed, otherwise we wait tmo jiffies on each loop.
Signed-off-by: Wentao Lou <Wentao.Lou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
On XGMI configuration the ib test may take longer to finish
Signed-off-by: shaoyunl <shaoyun.liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
drivers/gpu/drm/i915/intel_cdclk.c:2116: warning: Function parameter or member 'dev_priv' not described in 'intel_cdclk_needs_cd2x_update'
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Abhay Kumar <abhay.kumar@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190404073357.18795-1-chris@chris-wilson.co.uk
|
|
Mixing u8 and -1u together leads to zero-extended integer expansion, and
comparing 0x000000ff against 0xffffffff, causing us to report a mixed
uabi-class request as not busy.
The input flag is a u8, and we want to generate a u32 uABI response,
mark our functions so.
Fixes: c8b502422bfe ("drm/i915: Remove last traces of exec-id (GEM_BUSY)")
Testcase: igt/gem_exec_balance/busy
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190404101914.7231-1-chris@chris-wilson.co.uk
|
|
Picasso is a new raven variant.
Reviewed-by: Kent Russell <kent.russell@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
Abort thread wakeups, on some wqe types, are not happening. The thread
wakeup logic is dependent upon the LPFC_DRIVER_ABORTED flag. However, on
these wqes, the completion handler running prior to the io completion
routine ends up clearing the flag.
Rework the wakeup logic to look at a non-null waitq element which must be
set if the abort thread is waiting. This is reverting the change in the
indicated patch.
Fixes: c2017260eea2d ("scsi: lpfc: Rework locking on SCSI io completion")
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Reduce the default VMbus channel ring buffer size for storvsc SCSI devices
from 1 Mbyte to 128 Kbytes. Measurements show that ring buffer sizes above
128 Kbytes do not increase performance even at very high IOPS rates, so
don't waste the memory. Also remove the dependence on PAGE_SIZE, since the
ring buffer size should not change on architectures where PAGE_SIZE is not
4 Kbytes.
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
When the number of sub-channels offered by Hyper-V is >= the number of CPUs
in the VM, calculate the correct number of sub-channels. The current code
produces one too many.
This scenario arises only when the number of CPUs is artificially
restricted (for example, with maxcpus=<n> on the kernel boot line), because
Hyper-V normally offers a sub-channel count < number of CPUs. While the
current code doesn't break, the extra sub-channel is unbalanced across the
CPUs (for example, a total of 5 channels on a VM with 4 CPUs).
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Long Li <longli@microsoft.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Blacklist "Universal Xport" LUN. It's used for in-band storage array
management. Also add model to the rdac dh family.
Cc: Martin Wilck <mwilck@suse.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: NetApp RDAC team <ng-eseries-upstream-maintainers@netapp.com>
Cc: Christophe Varoqui <christophe.varoqui@opensvc.com>
Cc: James E.J. Bottomley <jejb@linux.vnet.ibm.com>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: SCSI ML <linux-scsi@vger.kernel.org>
Cc: DM ML <dm-devel@redhat.com>
Signed-off-by: Xose Vazquez Perez <xose.vazquez@gmail.com>
Reviewed-by: Martin Wilck <mwilck@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
This driver is for the ASPEED BMC SoC's GFX display hardware. This
driver runs on the ARM based BMC systems, unlike the ast driver which
runs on a host CPU and is is for a PCI graphics device.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190403001909.31637-3-joel@jms.id.au
|
|
drm-intel-fixes
gvt-fixes-2019-04-04
- Fix shadow mm pin count (Yan)
- Fix cmd parser error path recover (Yan)
- Fix vGPU display plane size calculation (Xiong)
- Fix kerneldoc (Chris)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
From: Zhenyu Wang <zhenyuw@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190404003957.GB8327@zhen-hp.sh.intel.com
|
|
drivers/gpu/drm/i915/gvt/display.c:457: warning: Function parameter or member 'connected' not described in 'intel_vgpu_emulate_hotplug'
drivers/gpu/drm/i915/gvt/display.c:457: warning: Excess function parameter 'conncted' description in 'intel_vgpu_emulate_hotplug'
Fixes: 1ca20f33df42 ("drm/i915/gvt: add hotplug emulation")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Hang Yuan <hang.yuan@linux.intel.com>
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Cc: Zhi Wang <zhi.a.wang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
|
|
stride isn't in unit of pixel, it is bytes, so calculation of
plane size doesn't need to multiple bpp.
Fixes: e546e281d33d ("drm/i915/gvt: Dmabuf support for GVT-g")
Signed-off-by: Xiong Zhang <xiong.y.zhang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
|
|
One might want to use the VC4 display stack without using Mesa.
Similar to the debugfs fixes for not having all of the possible
display bits enabled, make sure you can't oops in vc4 if v3d isn't
enabled.
v2: Fix matching against other v3d variants (review by Paul), don't
forget to set irq_enabled so that the vblank uapi works
v3: Use -ENODEV instead of -EINVAL on Paul's suggestion.
Signed-off-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20190401183559.3823-2-eric@anholt.net
Reviewed-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
|
|
The global list of all debugfs entries for the driver was painful: the
list couldn't see into the components' structs, so each component had
its own debugs show function to find the component, then find the
regset and dump it. The components also had to be careful to check
that they were actually registered in vc4 before dereferencing
themselves, in case they weren't probed on a particular platform.
They routinely failed at that.
Instead, we can have the components add their debugfs callbacks to a
little list in vc4 to be registered at drm_dev_register() time, which
gets vc4_debugfs.c out of the business of knowing the whole list of
components.
Thanks to this change, dsi0 (if it existed) would register its node.
v2: Rebase on hvs_underrun addition.
v3: whitespace fixup
Signed-off-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20190401183559.3823-1-eric@anholt.net
Reviewed-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
|
|
On ivb+ we can select between the regular 10bit LUT mode with
1024 entries, and the split mode where the LUT is split into
seprate degamma and gamma halves (each with 512 entries). Currently
we expose the split gamma size of 512 as the GAMMA/DEGAMMA_LUT_SIZE.
When using only degamma or gamma (not both) we are wasting half of
the hardware LUT entries. Let's flip that around so that we expose
the full 1024 entries and just throw away half of the user provided
entries when using the split gamma mode.
Cc: Matt Roper <matthew.d.roper@intel.com>
Suggested-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190401200231.2333-8-ville.syrjala@linux.intel.com
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
|
|
Just so we don't leave gen2/3 out in the cold let's advertize the
legacy LUT via the GAMMA_LUT/GAMMA_LUT_SIZE props. Without the
GAMMA_LUT prop we can't actually load a LUT using the atomic ioctl
(in preparation for the day of 100% atomic driver).
Supposedly some gen2/3 platforms have an interpolated 10bit gamma mode
as well. It's slightly funkier than the i965+ mode since you have to
specify the slope for the interpolation by hand. But when I tried it
I couldn't get it to work, the hardware just insisted on using the
8bit more regardless of the state of the relevant PIPECONF bit.
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190401200231.2333-7-ville.syrjala@linux.intel.com
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
|
|
i965+ have an interpolate 10bit LUT mode. Let's expose that so
that we can actually enjoy real 10bpc.
v2: Don't use I915_WRITE_FW() yet
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190401200231.2333-6-ville.syrjala@linux.intel.com
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
|
|
Plop in support for 10bit LUT on ilk/snb.
There is no split gamma mode on these platforms, so we have
to choose between degamma and gamma. That could be a runtime choice
but for now let's just advertize the gamma as having 1024 entries.
We'll also keep the ctm hidden for now.
v2: Don't use I915_WRITE_FW() yet
Introduce bool has_ctm (Maarten)
Call drm_crtc_enable_color_mgmt() uncoditionally (Maarten)
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190401200231.2333-5-ville.syrjala@linux.intel.com
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
|
|
Reuse the bdw+ code to get split/10bit gamma for
ivb/hsw. The hardware is nearly identical. The
only slight snag is that on ivb/hsw the precision
palette auto increment mode does not work. So we
must increment the index manually. We'll probably
want to stick to the auto increment mode on bdw+
in the name of efficiency.
Also we want to avoid using the CSC for limited range
RGB output as PIPECONF will take care of that on IVB.
v2: Rebase due to EXT_GC_MAX/EXT2_GC_MAX changes
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190401200231.2333-4-ville.syrjala@linux.intel.com
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
|
|
Using the split gamma mode when we don't have to has the annoying
requirement of loading a linear LUT to the unused half. Instead
let's make life simpler by switching to the 10bit gamma mode
and duplicating each entry.
This also allows us to load the software gamma LUT into the
hardware degamma LUT, thus removing some of the buggy
configurations we currently allow (YCbCr/limited range RGB
+ gamma LUT). We do still have other configurations that are
also buggy, but those will need more complicated fixes
or they just need to be rejected. Sadly GLK doesn't have
this flexibility anymore and the degamma and gamma LUTs
are very different so no help there.
v2: Apply a mask when checking gamma_mode on icl since it
contains more bits than just the gamma mode
v3: Rebase due to EXT_GC_MAX/EXT2_GC_MAX changes
v4: s/advertize/advertise/ (Uma)
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190401200231.2333-3-ville.syrjala@linux.intel.com
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
|
|
Extract a helper to calculate the ILK+ 10bit gamma LUT entry.
It's already duplicated twice, and soon we'll have more.
v2: s/it/bit/ (Matt)
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190401200231.2333-2-ville.syrjala@linux.intel.com
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
|
|
Memory backed DMA mappings are accounted against a user's locked
memory limit, including multiple mappings of the same memory. This
accounting bounds the number of such mappings that a user can create.
However, DMA mappings that are not backed by memory, such as DMA
mappings of device MMIO via mmaps, do not make use of page pinning
and therefore do not count against the user's locked memory limit.
These mappings still consume memory, but the memory is not well
associated to the process for the purpose of oom killing a task.
To add bounding on this use case, we introduce a limit to the total
number of concurrent DMA mappings that a user is allowed to create.
This limit is exposed as a tunable module option where the default
value of 64K is expected to be well in excess of any reasonable use
case (a large virtual machine configuration would typically only make
use of tens of concurrent mappings).
This fixes CVE-2019-3882.
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
