summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2016-01-15drm/i915: Set i915_ggtt_view_normal type explicitlyVille Syrjälä
Just for clarity set the type for i915_ggtt_view_normal explicitly. While at it fix the indentation fail for i915_ggtt_view_rotated. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1452777736-4909-3-git-send-email-ville.syrjala@linux.intel.com
2016-01-15drm/i915: Don't leak framebuffer_references if drm_framebuffer_init() failsVille Syrjälä
Don't increment obj->framebuffer_references until we know we actually managed to create the framebuffer. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1452777736-4909-2-git-send-email-ville.syrjala@linux.intel.com
2016-01-15Merge branches 'pci/hotplug' and 'pci/resource' into nextBjorn Helgaas
* pci/hotplug: PCI: ibmphp: Remove unneeded NULL test PCI: hotplug: Use list_for_each_entry() to simplify code PCI: acpiphp_ibm: Fix null dereferences on null ibm_slot * pci/resource: PCI: Avoid iterating through memory outside the resource window PCI: Fix minimum allocation address overwrite
2016-01-15Merge branches 'pci/host', 'pci/host-designware', 'pci/host-hisi', ↵Bjorn Helgaas
'pci/host-qcom' and 'pci/host-rcar' into next * pci/host: PCI: host: Add of_pci_get_host_bridge_resources() stub PCI: host: Mark PCIe/PCI (MSI) IRQ cascade handlers as IRQF_NO_THREAD * pci/host-designware: PCI: designware: Make config accessor override checking symmetric PCI: designware: Simplify control flow * pci/host-hisi: PCI: hisi: Add support for HiSilicon Hip06 PCIe host controllers * pci/host-qcom: ARM: dts: ifc6410: enable PCIe DT node for this board ARM: dts: apq8064: add PCIe devicetree node PCI: qcom: Add Qualcomm PCIe controller driver PCI: qcom: Document PCIe devicetree bindings PCI: designware: Ensure ATU is enabled before IO/conf space accesses * pci/host-rcar: PCI: rcar: Add Gen2 PHY setup to pcie-rcar PCI: rcar: Add runtime PM support to pcie-rcar PCI: rcar: Remove unused pci_sys_data struct from pcie-rcar
2016-01-15drm/amdgpu: Add some tweaks to gfx 8 soft resetAlex Deucher
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Reviewed-by: Ken Wang <Qingqing.Wang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-01-15drm/amdgpu: fix tonga smu resumeAlex Deucher
Need to make sure smu buffers are pinned on resume. This matches what Fiji does. Cc: stable@vger.kernel.org Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Reviewed-by: Ken Wang <Qingqing.Wang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-01-15clockevents/tcb_clksrc: Prevent disabling an already disabled clockAlexandre Belloni
clockevents_exchange_device is calling clockevents_shutdown() on the new clockenvents device but it may have never been enabled in the first place. This results in the tcb clock being disabled without being enabled first: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 1 at drivers/clk/clk.c:680 clk_disable+0x28/0x34() Modules linked in: CPU: 0 PID: 1 Comm: swapper Not tainted 4.4.0+ #6 Hardware name: Atmel AT91SAM9 [<c000f2b8>] (unwind_backtrace) from [<c000d01c>] (show_stack+0x10/0x14) [<c000d01c>] (show_stack) from [<c00172f0>] (warn_slowpath_common+0x78/0xa0) [<c00172f0>] (warn_slowpath_common) from [<c00173a8>] (warn_slowpath_null+0x18/0x20) [<c00173a8>] (warn_slowpath_null) from [<c0361528>] (clk_disable+0x28/0x34) [<c0361528>] (clk_disable) from [<c034d560>] (tc_shutdown+0x38/0x4c) [<c034d560>] (tc_shutdown) from [<c0059ad4>] (clockevents_switch_state+0x38/0x6c) [<c0059ad4>] (clockevents_switch_state) from [<c0059b18>] (clockevents_shutdown+0x10/0x24) [<c0059b18>] (clockevents_shutdown) from [<c005a458>] (tick_check_new_device+0x84/0xac) [<c005a458>] (tick_check_new_device) from [<c0059660>] (clockevents_register_device+0x7c/0x108) [<c0059660>] (clockevents_register_device) from [<c06b5a68>] (tcb_clksrc_init+0x390/0x3e8) [<c06b5a68>] (tcb_clksrc_init) from [<c00097cc>] (do_one_initcall+0x114/0x1d4) [<c00097cc>] (do_one_initcall) from [<c069bd54>] (kernel_init_freeable+0xfc/0x1b8) [<c069bd54>] (kernel_init_freeable) from [<c04c3818>] (kernel_init+0x8/0xe0) [<c04c3818>] (kernel_init) from [<c000a410>] (ret_from_fork+0x14/0x24) ---[ end trace 0000000000000001 ]--- Check what state we were in before trying to disable the clock. Fixes: cf4541c101ea ("clockevents/drivers/tcb_clksrc: Migrate to new 'set-state' interface") Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Boris Brezillon <boris.brezillon@free-electrons.com> Cc: linux-arm-kernel@lists.infradead.org Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/1452854061-30370-1-git-send-email-alexandre.belloni@free-electrons.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-01-15drm/fb_cma_helper: Remove implicit call to disable_unused_functionsMaxime Ripard
The drm_fbdev_cma_init function always calls the drm_helper_disable_unused_functions. Since it's part of the usual probe process, all the drivers using that helper will end up having their encoder and CRTC disable functions called at probe if their device has not been reported as enabled. This could be fixed by reading out from the registers the current state of the device if it is enabled, but even that will not handle the case where the device is actually disabled. Moreover, the drivers using the atomic modesetting expect that their enable and disable callback to be called when the device is already enabled or disabled (respectively). We can however fix this issue by moving the call to drm_helper_disable_unused_functions out of drm_fbdev_cma_init and make the drivers needing it (all the drivers calling drm_fbdev_cma_init and not using the atomic modesetting) explicitly call it. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Link: http://patchwork.freedesktop.org/patch/msgid/1452785109-6172-14-git-send-email-maxime.ripard@free-electrons.com Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2016-01-15drm/i915/dp: fall back to 18 bpp when sink capability is unknownJani Nikula
Per DP spec, the source device should fall back to 18 bpp, VESA range RGB when the sink capability is unknown. Fix the color depth clamping. 18 bpp color depth should ensure full color range in automatic mode. The clamping has been HDMI specific since its introduction in commit 996a2239f93b03c5972923f04b097f65565c5bed Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Fri Apr 19 11:24:34 2013 +0200 drm/i915: Disable high-bpc on pre-1.4 EDID screens Cc: stable@vger.kernel.org Reported-and-tested-by: Dihan Wickremasuriya <nayomal@gmail.com> Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=105331 Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1452695720-7076-1-git-send-email-jani.nikula@intel.com
2016-01-15drm/i915/bios: Fix the sequence size calculations for MIPI seq v3Jani Nikula
Two errors in a single line. The size was read from the wrong offset, and the end index didn't take the five bytes for sequence byte and size of sequence into account. Fix it all, and break up the calculations a bit to make it clearer. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reported-and-tested-by: Mika Kahola <mika.kahola@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Fixes: 2a33d93486f2 ("drm/i915/bios: add support for MIPI sequence block v3") Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1452784327-27258-1-git-send-email-jani.nikula@intel.com
2016-01-15drm/i915: Make sure DC writes are coherent on flush.Francisco Jerez
We need to set the DC FLUSH PIPE_CONTROL bit on Gen7+ to guarantee that writes performed via the HDC are visible in memory. Fixes an intermittent failure in a Piglit test that writes to a BO from a shader using GL atomic counters (implemented as HDC untyped atomics) and then expects the memory to read back the same value after mapping it on the CPU. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=91298 Tested-by: Mark Janes <mark.a.janes@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: stable@vger.kernel.org Signed-off-by: Francisco Jerez <currojerez@riseup.net> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1452740379-3194-1-git-send-email-currojerez@riseup.net Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2016-01-14drm/i915: Use the active wm config for merging on ILK-BDWVille Syrjälä
ilk_program_watermarks() is supposed to merge the active watermarks from all pipes. Thus we need to use the active config too instead of some precomputed stuff. Fixes: aa363136866c ("drm/i915: Calculate watermark configuration during atomic check (v2)") Cc: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1452776015-22076-2-git-send-email-ville.syrjala@linux.intel.com
2016-01-14drm/i915: Start WM computation from scratch on ILK-BDWVille Syrjälä
ilk_compute_pipe_wm() assumes as zeroed pipe_wm structure when it starts. We used to pass such a zeroed struct in, but this got broken when the pipe_wm structure got embedded in the crtc state. To fix it without too much fuzz, we need to resort to a memset(). Fixes: 4e0963c7663b ("drm/i915: Calculate pipe watermarks into CRTC state (v3)") Cc: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1452776015-22076-1-git-send-email-ville.syrjala@linux.intel.com
2016-01-14Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial Pull trivial tree updates from Jiri Kosina. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: floppy: make local variable non-static exynos: fixes an incorrect header guard dt-bindings: fixes some incorrect header guards cpufreq-dt: correct dead link in documentation cpufreq: ARM big LITTLE: correct dead link in documentation treewide: Fix typos in printk Documentation: filesystem: Fix typo in fs/eventfd.c fs/super.c: use && instead of & for warn_on condition Documentation: fix sysfs-ptp lib: scatterlist: fix Kconfig description
2016-01-14Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid Pull HID updates from Jiri Kosina: - appoint Benjamin Tissoires as co-maintainer / designated reviewer - sysfs report_descriptor visibility fix for unclaimed devices, from Andy Lutomirski - suspend/resume fixes for Sony driver from Frank Praznik - IRQ deadlock fix from Ioan-Adrian Ratiu - hid-i2c fixes affecting (at least) Yoga 900 from Mika Westerberg and Srinivas Pandruvada - a lot of new device support (especially, but not limited to, Wacom) and assorted small misc fixes - almost complete G920 support; the only bit that is missing is switching the device to HID mode automatically; Simon Wood and Michal Maly are working on it. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (46 commits) Revert "INPUT: xpad: switch Logitech G920 Wheel into HID mode" HID: sensor-hub: Add quirk for Lenovo Yoga 900 with ITE Chips HID: Add new PID for Microchip Pick16F1454 HID: wacom: Use correct report to query pen ID from INTUOSHT2 devices HID: i2c-hid: Prevent sending reports from racing with device reset HID: use kobj_to_dev() HID: wiimote: use dev_to_wii() HID: add a new helper to_hid_driver() HID: use to_hid_device() HID: move to_hid_device() to hid.h HID: usbhid: use to_usb_device HID: corsair: Convert to use module_hid_driver HID: input: ignore the battery in OKLICK Laser BTmouse HID: wacom: Fix pad button range for CINTIQ_COMPANION_2 HID: wacom: Fix touchring value reporting HID: wacom: Report 'strip2' values in ABS_RY HID: wacom: Limit touchstrip data to 13 bits HID: wacom: bitwise vs logical ORs HID: wacom: Apply lowres quirk to BAMBOO_TOUCH devices HID: enable hid device to suspend/resume asynchronously ...
2016-01-14drivers/base/memory.c: fix kernel warning during memory hotplug on ppc64John Allen
Fix a bug where a kernel warning is triggered when performing a memory hotplug on ppc64. This warning may also occur on any architecture that uses the memory_probe_store interface. WARNING: at drivers/base/memory.c:200 CPU: 9 PID: 13042 Comm: systemd-udevd Not tainted 4.4.0-rc4-00113-g0bd0f1e-dirty #7 NIP [c00000000055e034] pages_correctly_reserved+0x134/0x1b0 LR [c00000000055e7f8] memory_subsys_online+0x68/0x140 Call Trace: memory_subsys_online+0x68/0x140 device_online+0xb4/0x120 store_mem_state+0xb0/0x180 dev_attr_store+0x34/0x60 sysfs_kf_write+0x64/0xa0 kernfs_fop_write+0x17c/0x1e0 __vfs_write+0x40/0x160 vfs_write+0xb8/0x200 SyS_write+0x60/0x110 system_call+0x38/0xd0 The warning is triggered because there is a udev rule that automatically tries to online memory after it has been added. The udev rule varies from distro to distro, but will generally look something like: SUBSYSTEM=="memory", ACTION=="add", ATTR{state}=="offline", ATTR{state}="online" On any architecture that uses memory_probe_store to reserve memory, the udev rule will be triggered after the first section of the block is reserved and will subsequently attempt to online the entire block, interrupting the memory reservation process and causing the warning. This patch modifies memory_probe_store to add a block of memory with a single call to add_memory as opposed to looping through and adding each section individually. A single call to add_memory is protected by the mem_hotplug mutex which will prevent the udev rule from onlining memory until the reservation of the entire block is complete. Signed-off-by: John Allen <jallen@linux.vnet.ibm.com> Acked-by: Dave Hansen <dave.hansen@intel.com> Cc: Nathan Fontenot <nfont@linux.vnet.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-14drivers/base/memory.c: rename remove_memory_block() to remove_memory_section()Seth Jennings
The function removes a section, not a block. Rename to reflect actual functionality. Signed-off-by: Seth Jennings <sjennings@variantweb.net> Cc: Andrew Banman <abanman@sgi.com> Cc: Daniel J Blueman <daniel@numascale.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Greg KH <greg@kroah.com> Cc: Russ Anderson <rja@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-14drivers/base/memory.c: clean up section countingSeth Jennings
Right now, section_count is calculated in add_memory_block(). However, init_memory_block() increments section_count as well, which, at first, seems like it would lead to an off-by-one error. There is no harm done because add_memory_block() immediately overwrites the mem->section_count, but it is messy. This commit moves the increment out of the common init_memory_block() (called by both add_memory_block() and register_new_memory()) and adds it to register_new_memory(). Signed-off-by: Seth Jennings <sjennings@variantweb.net> Cc: Andrew Banman <abanman@sgi.com> Cc: Daniel J Blueman <daniel@numascale.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Greg KH <greg@kroah.com> Cc: Russ Anderson <rja@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-14kmemcg: account certain kmem allocations to memcgVladimir Davydov
Mark those kmem allocations that are known to be easily triggered from userspace as __GFP_ACCOUNT/SLAB_ACCOUNT, which makes them accounted to memcg. For the list, see below: - threadinfo - task_struct - task_delay_info - pid - cred - mm_struct - vm_area_struct and vm_region (nommu) - anon_vma and anon_vma_chain - signal_struct - sighand_struct - fs_struct - files_struct - fdtable and fdtable->full_fds_bits - dentry and external_name - inode for all filesystems. This is the most tedious part, because most filesystems overwrite the alloc_inode method. The list is far from complete, so feel free to add more objects. Nevertheless, it should be close to "account everything" approach and keep most workloads within bounds. Malevolent users will be able to breach the limit, but this was possible even with the former "account everything" approach (simply because it did not account everything in fact). [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Vladimir Davydov <vdavydov@virtuozzo.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Tejun Heo <tj@kernel.org> Cc: Greg Thelen <gthelen@google.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-14cpuidle: menu: Fix menu_select() for CPUIDLE_DRIVER_STATE_START == 0Rafael J. Wysocki
Commit a9ceb78bc75c (cpuidle,menu: use interactivity_req to disable polling) exposed a bug in menu_select() causing it to return -1 on systems with CPUIDLE_DRIVER_STATE_START equal to zero, although it should have returned 0. As a result, idle states are not entered by CPUs on those systems. Namely, on the systems in question data->last_state_idx is initially equal to -1 and the above commit modified the condition that would have caused it to be changed to 0 to be less likely to trigger which exposed the problem. However, setting data->last_state_idx initially to -1 doesn't make sense at all and on the affected systems it should always be set to CPUIDLE_DRIVER_STATE_START (ie. 0) unconditionally, so make that happen. Fixes: a9ceb78bc75c (cpuidle,menu: use interactivity_req to disable polling) Reported-and-tested-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-01-14fsl/fman: Delete one function call "put_device" in dtsec_config()Markus Elfring
The Coccinelle semantic patch script "deref_null.cocci" pointed a problem out in the implementation of the function "dtsec_config". A null pointer was assigned to the data structure member "tbiphy" of the variable "dtsec" if a matching device was not found. A call of the function "put_device" was unnecessary then because a previous call of the function "get_device" was not triggered. Thus remove the function call "put_device" after the printing of the desired error message. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-14Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Ingo Molnar: "Misc changes: - fix lguest bug - fix /proc/meminfo output on certain configs - fix pvclock bug - fix reboot on certain iMacs by adding new reboot quirk - fix bootup crash - fix FPU boot line option parsing - add more x86 self-tests - small cleanups, documentation improvements, etc" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/cpu/amd: Remove an unneeded condition in srat_detect_node() x86/vdso/pvclock: Protect STABLE check with the seqcount x86/mm: Improve switch_mm() barrier comments selftests/x86: Test __kernel_sigreturn and __kernel_rt_sigreturn x86/reboot/quirks: Add iMac10,1 to pci_reboot_dmi_table[] lguest: Map switcher text R/O x86/boot: Hide local labels in verify_cpu() x86/fpu: Disable AVX when eagerfpu is off x86/fpu: Disable MPX when eagerfpu is off x86/fpu: Disable XGETBV1 when no XSAVE x86/fpu: Fix early FPU command-line parsing x86/mm: Use PAGE_ALIGNED instead of IS_ALIGNED selftests/x86: Disable the ldt_gdt_64 test for now x86/mm/pat: Make split_page_count() check for empty levels to fix /proc/meminfo output x86/boot: Double BOOT_HEAP_SIZE to 64KB x86/mm: Add barriers and document switch_mm()-vs-flush synchronization
2016-01-14Merge branch 'timers-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer fixes from Ingo Molnar: "Three clocksource driver fixes" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: clocksource/drivers/vt8500: Increase the minimum delta clocksource/drivers/fsl_ftm_timer: Fix CLKSRC_MMIO dependency clocksource/drivers: Fix dependencies for !HAS_IOMEM archs
2016-01-14Merge branch 'i2c/for-4.5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c updates from Wolfram Sang: "Quite some driver updates: - piix4 can now handle multiplexed adapters - brcmstb, xlr, eg20t, designware drivers support more SoCs - emev2 gained i2c slave support - img-scb and rcar got bigger refactoring to remove issues - lots of common driver updates i2c core changes: - new quirk flag when an adapter does not support clock stretching, so clients can be configured to avoid that if possible - added a helper function to retrieve timing parameters from firmware (with rcar being the first user) - "multi-master" DT binding added so drivers can adapt to this setting (like disabling PM to keep arbitration working) - RuntimePM for the logical adapter device is now always enabled by the core to ensure propagation from childs to the parent (the HW device) - new macro builtin_i2c_driver to reduce boilerplate" * 'i2c/for-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (70 commits) i2c: create builtin_i2c_driver to avoid registration boilerplate i2c: imx: fix i2c resource leak with dma transfer dt-bindings: i2c: eeprom: add another EEPROM device dt-bindings: move I2C eeprom descriptions to the proper file i2c: designware: Do not require clock when SSCN and FFCN are provided DT: i2c: trivial-devices: Add Epson RX8010 and MPL3115 i2c: s3c2410: remove superfluous runtime PM calls i2c: always enable RuntimePM for the adapter device i2c: designware: retry transfer on transient failure i2c: ibm_iic: rename i2c_timings struct due to clash with generic version i2c: designware: Add support for AMD Seattle I2C i2c: imx: Remove unneeded comments i2c: st: use to_platform_device() i2c: designware: use to_pci_dev() i2c: brcmstb: Adding support for CM and DSL SoCs i2c: mediatek: fix i2c multi transfer issue in high speed mode i2c: imx: improve code readability i2c: imx: Improve message log when DMA is not used i2c: imx: add runtime pm support to improve the performance i2c: imx: init bus recovery info before adding i2c adapter ...
2016-01-14Merge tag 'devicetree-for-4.5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull DeviceTree updates from Rob Herring: - Rework and export the changeset API to make it available to users other than DT overlays - ARM secure devices binding - OCTEON USB binding - Clean-up of various SRAM binding docs - Various other binding doc updates * tag 'devicetree-for-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (21 commits) drivers/of: Export OF changeset functions Fix documentation for adp1653 DT ARM: psci: Fix indentation in DT bindings of/platform: export of_default_bus_match_table of/unittest: Show broken behaviour in the platform bus of: fix declaration of of_io_request_and_map of/address: replace printk(KERN_ERR ...) with pr_err(...) of/irq: optimize device node matching loop in of_irq_init() dt-bindings: tda998x: Document the required 'port' node. net/macb: bindings doc: Merge cdns-emac to macb dt-bindings: Misc fix for the ATH79 DDR controllers dt-bindings: Misc fix for the ATH79 MISC interrupt controllers Documentation: dt: Add bindings for Secure-only devices dt-bindings: ARM: add arm,cortex-a72 compatible string ASoC: Atmel: ClassD: add GCK's parent clock in DT binding DT: add Olimex to vendor prefixes Documentation: fsl-quadspi: Add fsl,ls1021-qspi compatible string Documentation/devicetree: document OCTEON USB bindings usb: misc: usb3503: Describe better how to bind clock to the hub dt-bindings: Consolidate SRAM bindings from all vendors ...
2016-01-14Merge tag 'mfd-for-linus-4.5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD updates from Lee Jones: "New Device Support: - Add support for s2mps15; sec-core - Add support for Lewisburg; lpc_ich - Add support for cs47l24 and wm1831; arizona New Functionality: - Allow user to select syscon register width; syscon Fix-ups: - Lots of Checkpatch fixes - Rename -pmic/-regulator; s2mps11 - Build driver components into a single module; wm8994-* - Better handing of IRQ during suspend/resume; as3722 - Constify things; da903x - Remove unused code; ab8500-core - Improve error handing; qcom_rpm - Simplify code: wm831x-otp, sta2x11-mfd - Improve locking; cros_ec_spi - Fix incorrect DT binding filename reference; arizona, palmas, snps-dwapb-gpio, wm8994 Bug Fixes: - Fix broken SYSFS 'show ID' call; wm831x-otp - Protect reads from non-existent registers; qcom-spmi-pmic - Repair build warnings; as3722 - Fix IRQ request ordering; arizona-irq - Ensure return value is boolean; ucb1x00-core, tps65010, tc6393xb, htc-egpio, dm355evm_msp, asic3" * tag 'mfd-for-linus-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (58 commits) mfd: davinci_voicecodec: Remove pointless 'out of memory' error message mfd: da9052-irq: Fix trivial 'space before comma' error mfd: da9052-i2c: Fix tabbing/whitespace issue mfd: da903x: Fix white space and split string issues mfd: cs5535-mfd: Add missing line spacing and make local array static mfd: cros_ec_spi: Repair comparison ordering issue mfd: cros_ec_i2c: Fix trivial 'tabs before spaces' whitespace issue. mfd: asic3: Fix a plethora of Checkpatch errors and warnings mfd: as3711: Repair OOM and 'line over 80 chars' formatting warnings mfd: arizona-i2c: Add blank line formatting after declaration mfd: arizona-core: msleep() is unreliable for anything <20ms use usleep_range() instead mfd: adp5520: Some trivial 'no space before tab' fixes mfd: ab8500-sysctrl: Fix Constify, printk => pr_info and formatting issues mfd: ab8500-gpadc: Squash a whole bunch of Checkpatch warnings and one error mfd: ab8500-debugfs: Clean-up non-conforming commenting and print formatting mfd: ab8500-core: Fix many warnings reported by Checkpatch mfd: ab2100-otp: Remove pointless 'out of memory' error message mfd: ab3100-core.c: Fix multiple warnings reported by Checkpatch mfd: aat2870-core: Remove unnecessary 'out of memory' message mfd: 88pm860x-core: Fix commenting and declaration spacing ...
2016-01-14Merge tag 'for-v4.5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply Pull power supply and reset updates from Sebastian Reichel: "I have mostly fixes in the power-supply tree for the 4.5 kernel. I should mention, that the top-most commit has not been in next, but it's a fix changing only a single register offset. Summary: - uncouple CONFIG_POWER_RESET from CONFIG_POWER_SUPPLY - misc fixes" * tag 'for-v4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: power: bq27xxx_battery: Fix bq27541 AveragePower register address power: test_power: correctly handle empty writes power: generic-adc-battery: use to_delayed_work power: isp1704_charger: Fix isp1704_write() definition power: bq27xxx: fix register numbers of bq27500 power: bq27xxx: fix reading for bq27000 and bq27010 power: Fix unmet dependency on POWER_SUPPLY by POWER_RESET by uncoupling them power: bq27xxx_battery: Reorganize I2C into a module power: bq27xxx: don't fill system log by missing battery power: max8903_charger: set IRQF_ONESHOT if no primary handler is specified power/reset: at91-reset: add missing of_node_put power: ds2782_battery: constify ds278x_battery_ops structure power: bq2415x_charger: Delete unnecessary checks before the function call "of_node_put"
2016-01-14Merge tag 'hsi-for-4.5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-hsi Pull HSI updates from Sebastian Reichel: "Misc fixes" * tag 'hsi-for-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-hsi: HSI: omap_ssi_port: fix handling of_get_named_gpio result HSI: omap_ssi: fix handling ida_simple_get result HSI: Remove struct hsi_client private fields from kernel-doc
2016-01-14Merge tag 'backlight-for-linus-4.5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight Pull backlight updates from Lee Jones: Fix-ups: - Take heed of GPIO default-on requests; gpio_backlight - Enable DT probing; tps65217_bl Bug Fixes: - Free resources in error path; pwm_bl - Fix uninitialised variable warning; adp8860_bl, adp8870_bl - Protect unconditional DT look-ups from non-DT platforms; pwm_bl - Fix backlight flicker; pwm_bl * tag 'backlight-for-linus-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight: backlight: pwm_bl: Free PWM requested by legacy API on error path backlight: adp8860: Fix another uninitialized variable use backlight: gpio-backlight: Use default-on on GPIO request backlight: pwm_bl: Fix broken PWM backlight for non-dt platforms backlight: tps65217_bl: Add MODULE_DEVICE_TABLE backlight: pwm_bl: Avoid backlight flicker when probed from DT backlight: adp88x0: Fix uninitialized variable use
2016-01-14Merge branches 'for-4.4/upstream-fixes', 'for-4.5/async-suspend', ↵Jiri Kosina
'for-4.5/container-of-cleanups', 'for-4.5/core', 'for-4.5/i2c-hid', 'for-4.5/logitech', 'for-4.5/multitouch', 'for-4.5/sony', 'for-4.5/upstream' and 'for-4.5/wacom' into for-linus
2016-01-14drm/i915: add onoff utility functionJani Nikula
Add a common function to return "on" or "off" string based on the argument, and drop the local versions of it. This is the onoff version of commit 42a8ca4cb4a48ddbf40e8edb291425e76bcdc230 Author: Jani Nikula <jani.nikula@intel.com> Date: Thu Aug 27 16:23:30 2015 +0300 drm/i915: add yesno utility function Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1452768814-29787-1-git-send-email-jani.nikula@intel.com
2016-01-14mmc: atmel: get rid of struct mci_dma_dataMans Rullgard
As struct mci_dma_data is now only used by AVR32, it is nothing but pointless indirection. Replace it with struct dw_dma_slave in the AVR32 platform code and with a void pointer elsewhere. Signed-off-by: Mans Rullgard <mans@mansr.com> Acked-by: Hans-Christian Noren Egtvedt <egtvedt@samfundet.no> Acked-by: Ludovic Desroches <ludovic.desroches@atmel.com> Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-01-14mmc: atmel-mci: restore dma on AVR32Mans Rullgard
Commit ecb89f2f5f3e7 ("mmc: atmel-mci: remove compat for non DT board when requesting dma chan") broke dma on AVR32 and any other boards not using DT. This restores a fallback mechanism for such cases. Signed-off-by: Mans Rullgard <mans@mansr.com> Acked-by: Hans-Christian Noren Egtvedt <egtvedt@samfundet.no> Acked-by: Ludovic Desroches <ludovic.desroches@atmel.com> Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-01-14Revert "mac80211_hwsim: support any address in userspace"Bob Copeland
This reverts commit cd37a90b2a417e5882414e19954eeed174aa4d29. Different userspace programs interpreted HWSIM_ATTR_ADDR_TRANSMITTER and HWSIM_ATTR_ADDR_RECEIVER differently: some expected it to be an unchanging hardware address that is tied to the radio despite which address is configured on the interface, while others expected to be a copy of the address in the frame (the configured address). The intent of the original authors is unclear. The latter interpretation doesn't really work properly with multiple vifs and broadcast frames. Also, as the TA is already in the frame, userspace programs can actually support configured addresses in the former interpretation by mapping between them and the supplied HWSIM_ATTR_ADDR_TRANSMITTER. So, in the interest of API stability, revert to the previous mode of operation and going forward use the former interpretation. Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-01-14mmc: tmio_mmc_dma: don't print invalid DMA cookieArnd Bergmann
The tmio_mmc_start_dma_{rx,tx} function functions contain debug code that prints the dma cookie among other things. However, in case we fall back to PIO mode for some reason, the cookie variable is never initialized, and gcc warns about this: In file included from ../include/linux/printk.h:277:0, from ../include/linux/kernel.h:13, from ../include/linux/list.h:8, from ../include/linux/kobject.h:20, from ../include/linux/device.h:17, from ../drivers/mmc/host/tmio_mmc_dma.c:13: ../drivers/mmc/host/tmio_mmc_dma.c: In function 'tmio_mmc_start_dma': ../include/linux/dynamic_debug.h:86:3: warning: 'cookie' may be used uninitialized in this function [-Wmaybe-uninitialized] __dynamic_dev_dbg(&descriptor, dev, fmt, \ ^ ../drivers/mmc/host/tmio_mmc_dma.c:128:15: note: 'cookie' was declared here dma_cookie_t cookie; This modifies the dev_dbg() statements so we only print the cookie when we are already in the DMA path. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-01-14mmc: core: Enable tuning according to the actual timingCarlo Caione
While in sdhci_execute_tuning() the choice whether or not to enable the tuning is done on the actual timing, in the mmc_sdio_init_uhs_card() the check is done on the capability of the card. This difference is causing some issues with some SDIO cards in DDR50 mode where the CDM19 is wrongly issued. With this patch we modify the check in both mmc_(sd|sdio)_init_uhs_card() functions to take the proper decision only according to the actual timing specification. Cc: stable@vger.kernel.org Signed-off-by: Carlo Caione <carlo@endlessm.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-01-14mmc: mmci: support 8bit mode on the NomadikLinus Walleij
The Nomadik variant supports 8bit mode for (e)MMC cards. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-01-14mmc: mmci: fix an ages old detection errorLinus Walleij
commit 4956e10903fd ("ARM: 6244/1: mmci: add variant data and default MCICLOCK support") added variant data for ARM, U300 and Ux500 variants. The Nomadik NHK8815/8820 variant was erroneously labeled as a U300 variant, and when the proper Nomadik variant was later introduced in commit 34fd421349ff ("ARM: 7378/1: mmci: add support for the Nomadik MMCI variant") this was not fixes. Let's say this fixes the latter commit as there was no proper Nomadik support until then. Cc: stable@vger.kernel.org Fixes: 34fd421349ff ("ARM: 7378/1: mmci: add support for the Nomadik...") Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-01-14mfd: davinci_voicecodec: Remove pointless 'out of memory' error messageLee Jones
WARNING: Possible unnecessary 'out of memory' message + if (!davinci_vc) { + dev_dbg(&pdev->dev, total: 0 errors, 1 warnings, 154 lines checked Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-01-14mfd: da9052-irq: Fix trivial 'space before comma' errorLee Jones
ERROR: space prohibited before that ',' (ctx:WxW) + da9052_free_irq(da9052, DA9052_IRQ_ADC_EOM , da9052); total: 1 errors, 0 warnings, 290 lines checked Cc: Support Opensource <support.opensource@diasemi.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-01-14mfd: da9052-i2c: Fix tabbing/whitespace issueLee Jones
WARNING: suspect code indent for conditional statements (8, 24) + if (!i2c_safe_reg(reg)) + return regmap_read(da9052->regmap, total: 0 errors, 1 warnings, 226 lines checked Cc: Support Opensource <support.opensource@diasemi.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-01-14mfd: da903x: Fix white space and split string issuesLee Jones
While we're at it, let's also match the MODULE_LICENSE with the header. WARNING: please, no space before tabs + * ^IMike Rapoport <mike@compulab.co.il>$ WARNING: please, no space before tabs + * ^IEric Miao <eric.miao@marvell.com>$ WARNING: quoted string split across lines +MODULE_AUTHOR("Eric Miao <eric.miao@marvell.com>" + "Mike Rapoport <mike@compulab.co.il>"); total: 0 errors, 3 warnings, 574 lines checked Cc: Support Opensource <support.opensource@diasemi.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-01-14mfd: cs5535-mfd: Add missing line spacing and make local array staticLee Jones
WARNING: Missing a blank line after declarations + struct resource *res; + res = platform_get_resource(pdev, IORESOURCE_IO, 0); WARNING: char * array declaration might be better as static const + const char *acpi_clones[] = { "olpc-xo1-pm-acpi", "olpc-xo1-sci-acpi" }; total: 0 errors, 2 warnings, 192 lines checked Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-01-14mfd: cros_ec_spi: Repair comparison ordering issueLee Jones
WARNING: Comparisons should place the constant on the right side of the test + BUG_ON(EC_MSG_PREAMBLE_COUNT > ec_dev->din_size); WARNING: Comparisons should place the constant on the right side of the test + BUG_ON(EC_MSG_PREAMBLE_COUNT > ec_dev->din_size); total: 0 errors, 2 warnings, 731 lines checked Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-01-14mfd: cros_ec_i2c: Fix trivial 'tabs before spaces' whitespace issue.Lee Jones
ERROR: code indent should use tabs where possible + ^Iec_dev = devm_kzalloc(dev, sizeof(*ec_dev), GFP_KERNEL);$ WARNING: please, no space before tabs + ^Iec_dev = devm_kzalloc(dev, sizeof(*ec_dev), GFP_KERNEL);$ WARNING: please, no spaces at the start of a line + ^Iec_dev = devm_kzalloc(dev, sizeof(*ec_dev), GFP_KERNEL);$ total: 1 errors, 2 warnings, 366 lines checked Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-01-14mfd: asic3: Fix a plethora of Checkpatch errors and warningsLee Jones
ERROR: Macros with complex values should be enclosed in parentheses +#define INIT_CDEX(_name, _rate) \ + [ASIC3_CLOCK_##_name] = { \ + .cdex = CLOCK_CDEX_##_name, \ + .rate = _rate, \ + } WARNING: line over 80 characters + ASIC3_GPIO_INT_STATUS); WARNING: void function return statements are not generally useful + return; +} WARNING: msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.txt + msleep(1); WARNING: msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.txt + msleep(1); WARNING: msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.txt + msleep(1); WARNING: msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.txt + msleep(1); WARNING: msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.txt + msleep(1); WARNING: msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.txt + msleep(1); WARNING: msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.txt + msleep(1); WARNING: line over 80 characters + asic->tmio_cnf = ioremap((ASIC3_SD_CONFIG_BASE >> asic->bus_shift) + WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then p r_err(... to printk(KERN_ERR ... + printk(KERN_ERR "kzalloc failed\n"); WARNING: Possible unnecessary 'out of memory' message + if (asic == NULL) { + printk(KERN_ERR "kzalloc failed\n"); WARNING: Missing a blank line after declarations + int retval = 0; + retval = platform_driver_probe(&asic3_device_driver, asic3_probe); total: 1 errors, 13 warnings, 1081 lines checked Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-01-14mfd: as3711: Repair OOM and 'line over 80 chars' formatting warningsLee Jones
WARNING: Possible unnecessary 'out of memory' message + if (!pdata) { + dev_err(&client->dev, "Failed to allocate pdata\n"); WARNING: Possible unnecessary 'out of memory' message + if (!as3711) { + dev_err(&client->dev, "Memory allocation failed\n"); WARNING: line over 80 characters + dev_err(&client->dev, "regmap initialization failed: %d\n", ret); WARNING: line over 80 characters + /* We can reuse as3711_subdevs[], it will be copied in mfd_add_devices() */ WARNING: line over 80 characters + as3711_subdevs[AS3711_REGULATOR].platform_data = &pdata->regulator; WARNING: line over 80 characters + as3711_subdevs[AS3711_REGULATOR].pdata_size = sizeof(pdata->regulator); WARNING: line over 80 characters + as3711_subdevs[AS3711_BACKLIGHT].platform_data = &pdata->backlight; WARNING: line over 80 characters + as3711_subdevs[AS3711_BACKLIGHT].pdata_size = sizeof(pdata->backlight); total: 0 errors, 8 warnings, 236 lines checked Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-01-14mfd: arizona-i2c: Add blank line formatting after declarationLee Jones
WARNING: Missing a blank line after declarations + struct arizona *arizona = dev_get_drvdata(&i2c->dev); + arizona_dev_exit(arizona); total: 0 errors, 1 warnings, 120 lines checked Cc: patches@opensource.wolfsonmicro.com Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-01-14mfd: arizona-core: msleep() is unreliable for anything <20ms use ↵Lee Jones
usleep_range() instead WARNING: msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.txt + msleep(1); WARNING: msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.txt + msleep(5); WARNING: msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.txt + msleep(1); WARNING: msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.txt + msleep(1); total: 0 errors, 4 warnings, 1407 lines checked Cc: patches@opensource.wolfsonmicro.com Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-01-14mfd: adp5520: Some trivial 'no space before tab' fixesLee Jones
WARNING: please, no space before tabs + * ^IMike Rapoport <mike@compulab.co.il>$ WARNING: please, no space before tabs + * ^IEric Miao <eric.miao@marvell.com>$ WARNING: please, no space before tabs +^I.id_table ^I= adp5520_id,$ total: 0 errors, 3 warnings, 365 lines checked Cc: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
generated by cgit (git 2.34.1) at 2025-09-22 03:25:28 +0000