summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2022-03-11ice: Fix FV offset searchingMichal Swiatkowski
Checking only protocol ids while searching for correct FVs can lead to a situation, when incorrect FV will be added to the list. Incorrect means that FV has correct protocol id but incorrect offset. Call ice_get_sw_fv_list with ice_prot_lkup_ext struct which contains all protocol ids with offsets. With this modification allocating and collecting protocol ids list is not longer needed. Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-03-11gtp: Implement GTP echo requestWojciech Drewek
Adding GTP device through ip link creates the situation where GTP instance is not able to send GTP echo requests. Echo requests are used to check if GTP peer is still alive. With this patch, gtp_genl_ops are extended by new cmd (GTP_CMD_ECHOREQ) which allows to send echo request in the given version of GTP protocol (v0 or v1), from the given ms address to he given peer. TID is not inclued because in all path management messages it should be equal to 0. When GTP echo response is detected, multicast message is send to everyone in the gtp_genl_family. Message contains GTP version, ms address and peer address. Suggested-by: Harald Welte <laforge@gnumonks.org> Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com> Reviewed-by: Harald Welte <laforge@gnumonks.org> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-03-11gtp: Implement GTP echo responseWojciech Drewek
Adding GTP device through ip link creates the situation where there is no userspace daemon which would handle GTP messages (Echo Request for example). GTP-U instance which would not respond to echo requests would violate GTP specification. When GTP packet arrives with GTP_ECHO_REQ message type, GTP_ECHO_RSP is send to the sender. GTP_ECHO_RSP message should contain information element with GTPIE_RECOVERY tag and restart counter value. For GTPv1 restart counter is not used and should be equal to 0, for GTPv0 restart counter contains information provided from userspace(IFLA_GTP_RESTART_COUNT). Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com> Suggested-by: Harald Welte <laforge@gnumonks.org> Reviewed-by: Harald Welte <laforge@gnumonks.org> Tested-by: Harald Welte <laforge@gnumonks.org> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-03-11gtp: Allow to create GTP device without FDsWojciech Drewek
Currently, when the user wants to create GTP device, he has to provide file handles to the sockets created in userspace (IFLA_GTP_FD0, IFLA_GTP_FD1). This behaviour is not ideal, considering the option of adding support for GTP device creation through ip link. Ip link application is not a good place to create such sockets. This patch allows to create GTP device without providing IFLA_GTP_FD0 and IFLA_GTP_FD1 arguments. If the user sets IFLA_GTP_CREATE_SOCKETS attribute, then GTP module takes care of creating UDP sockets by itself. Sockets are created with the commonly known UDP ports used for GTP protocol (GTP0_PORT and GTP1U_PORT). In this case we don't have to provide encap_destroy because no extra deinitialization is needed, everything is covered by udp_tunnel_sock_release. Note: GTP instance created with only this change applied, does not handle GTP Echo Requests. This is implemented in the following patch. Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-03-11Merge tag 'icc-5.18-rc1' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc into char-misc-next Georgi writes: interconnect changes for 5.18 These are the interconnect changes for the 5.18-rc1 merge window consisting of minor framework and driver updates. Core changes: - Added stubs for the bulk API to expand compile testing coverage. Driver changes: - imx: Implemented get_bw() function to get initial avg/peak bandwidth. - msm8939: Fix ioremap collision for snoc-mm. Signed-off-by: Georgi Djakov <djakov@kernel.org> * tag 'icc-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc: interconnect: Add stubs for the bulk API interconnect: qcom: msm8939: Remove snoc_mm specific regmap dt-bindings: interconnect: Convert snoc-mm to a sub-node of snoc interconnect: imx: Add imx_icc_get_bw function to set initial avg and peak
2022-03-11Merge tag 'thunderbolt-for-v5.18-rc1' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt into usb-next Mika writes: thunderbolt: Changes for v5.18 merge window This includes following Thunderbolt/USB4 changes for the v5.18 merge window: * Improvements for Intel Alpine and Titan Ridge support * Replace acpi_bus_get_device() with acpi_fetch_acpi_dev() * Improvements around DROM handling on AMD hardware * A couple of cleanups. All these have been in linux-next with no reported issues. * tag 'thunderbolt-for-v5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt: thunderbolt: Rename EEPROM handling bits to match USB4 spec thunderbolt: Clarify register definitions for `tb_cap_plug_events` thunderbolt: Do not make DROM read success compulsory thunderbolt: Do not resume routers if UID is not set thunderbolt: Retry DROM reads for more failure scenarios thunderbolt: Replace acpi_bus_get_device() thunderbolt: Add internal xHCI connect flows for Thunderbolt 3 devices thunderbolt: Add missing device ID to tb_switch_is_alpine_ridge() thunderbolt: Disable LTTPR on Intel Titan Ridge thunderbolt: Remove useless DMA-32 fallback configuration
2022-03-11xen/blkfront: speed up purge_persistent_grants()Juergen Gross
purge_persistent_grants() is scanning the grants list for persistent grants being no longer in use by the backend. When having found such a grant, it will be set to "invalid" and pushed to the tail of the list. Instead of pushing it directly to the end of the list, add it first to a temporary list, avoiding to scan those entries again in the main list traversal. After having finished the scan, append the temporary list to the grant list. Suggested-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Roger Pau Monné <roger.pau@citrix.com> Reviewed-by: Jan Beulich <jbeulich@suse.com> Link: https://lore.kernel.org/r/20220311103527.12931-1-jgross@suse.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-03-11ptp: ocp: Add 2 more timestampersJonathan Lemon
The timecard now has 4 general purpose timestampers. Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-11ptp: ocp: Add 4 frequency countersJonathan Lemon
Input signals can be steered to any of the frequency counters. The counter measures the frequency over a number of seconds: echo 0 > freq1/seconds = turns off measurement echo 1 > freq1/seconds = sets period & turns on measurment. Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-11ptp: ocp: Program the signal generators via PTP_CLK_REQ_PEROUTJonathan Lemon
The signal generators can be programmed either via the sysfs file or through a PTP_CLK_REQ_PEROUT ioctl request. Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-11ptp: ocp: Add signal generators and update sysfs nodesJonathan Lemon
Newer firmware provides 4 programmable signal generators, add support for those here. The signal generators provide the ability to set the period, duty cycle, phase offset, and polarity, with new values defaulting to prior values. The period and phase offset are specified in nanoseconds. E.g: period [duty [phase [polarity]]] echo 500000000 > signal # 1/2 second period echo 1000000 40 100 > signal # 1ms period, 40% on, offset 100ns echo 0 > signal # turn off generator Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-11ptp: ocp: Add firmware capability bits for feature gatingJonathan Lemon
Add the ability to group sysfs nodes behind a firmware feature check. This way non-present sysfs attributes are omitted on older firmware, which does not have newer features. This will be used in the upcoming patches which adds more features to the timecard. Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-11ptp: ocp: Add GND and VCC output selectorsJonathan Lemon
These will provide constant outputs. Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-11ptp: ocp: Rename output selector 'GNSS' to 'GNSS1'Jonathan Lemon
As there are may be 2 GNSS outputs, rename the first one for clarity. This also works around a parsing issue when specifying selectors. Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-11ptp: ocp: Add ability to disable input selectors.Jonathan Lemon
This adds support for the "IN: None" selector, which disables the input on a sma pin. This should be compatible with old firmware (the firmware will ignore it if not supported). Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-11ptp: ocp: Add support for selectable SMA directions.Jonathan Lemon
Assuming the firmware allows it, the direction of each SMA connector is no longer fixed. Handle remapping directions for each pin. Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-11Merge tag 'usb-serial-5.18-rc1' of ↵Greg Kroah-Hartman
https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-next Johan writes: USB-serial updates for 5.18-rc1 Here are the USB-serial updates for 5.18-rc1, including: - a new "simple driver" for some Nokia phones - a fix for pl2303 GS type detection - another pl2303 device id Included is also a clean up. All have been in linux-next with no reported issues. * tag 'usb-serial-5.18-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial: USB: serial: usb_wwan: remove redundant assignment to variable i USB: serial: pl2303: fix GS type detection USB: serial: pl2303: add IBM device IDs USB: serial: simple: add Nokia phone driver
2022-03-11net: lan966x: Improve the CPU TX bitrate.Horatiu Vultur
When doing manual injection of the frame, it is required to check if the TX FIFO is ready to accept the next word of the frame. For this we are using 'readx_poll_timeout_atomic', the only problem is that before it actually checks the status, is determining the time when to finish polling the status. Which seems to be an expensive operation. Therefore check the status of the TX FIFO before calling 'readx_poll_timeout_atomic'. Doing this will improve the TX bitrate by ~70%. Because 99% the FIFO is ready by that time. The measurements were done using iperf3. Before: [ ID] Interval Transfer Bitrate Retr [ 5] 0.00-10.03 sec 55.2 MBytes 46.2 Mbits/sec 0 sender [ 5] 0.00-10.04 sec 53.8 MBytes 45.0 Mbits/sec receiver After: [ ID] Interval Transfer Bitrate Retr [ 5] 0.00-10.10 sec 95.0 MBytes 78.9 Mbits/sec 0 sender [ 5] 0.00-10.11 sec 95.0 MBytes 78.8 Mbits/sec receiver Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-11net: ethernet: ezchip: fix platform_get_irq.cocci warningYihao Han
Remove dev_err() messages after platform_get_irq*() failures. platform_get_irq() already prints an error. Generated by: scripts/coccinelle/api/platform_get_irq.cocci Signed-off-by: Yihao Han <hanyihao@vivo.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-11net: mv643xx_eth: use platform_get_irq() instead of platform_get_resource()Minghao Chi
It is not recommened to use platform_get_resource(pdev, IORESOURCE_IRQ) for requesting IRQ's resources any more, as they can be not ready yet in case of DT-booting. platform_get_irq() instead is a recommended way for getting IRQ even if it was not retrieved earlier. It also makes code simpler because we're getting "int" value right away and no conversion from resource to int is required. Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-11net: ethernet: ti: davinci_emac: Use platform_get_irq() to get the interruptLad Prabhakar
platform_get_resource(pdev, IORESOURCE_IRQ, ..) relies on static allocation of IRQ resources in DT core code, this causes an issue when using hierarchical interrupt domains using "interrupts" property in the node as this bypasses the hierarchical setup and messes up the irq chaining. In preparation for removal of static setup of IRQ resource from DT core code use platform_get_irq() for DT users only. While at it propagate error code in emac_dev_stop() in case platform_get_irq_optional() fails. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-11net: ethernet: ti: am65-cpsw: Convert to PHYLINKSiddharth Vadapalli
Convert am65-cpsw driver and am65-cpsw ethtool to use Phylink APIs as described at Documentation/networking/sfp-phylink.rst. All calls to Phy APIs are replaced with their equivalent Phylink APIs. No functional change intended. Use Phylink instead of conventional Phylib, in preparation to add support for SGMII/QSGMII modes. Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-11mac80211: replace DEFINE_SIMPLE_ATTRIBUTE with DEFINE_DEBUGFS_ATTRIBUTEYihao Han
Fix the following coccicheck warning: ./drivers/net/wireless/mac80211_hwsim.c:1040:0-23: WARNING: hwsim_fops_rx_rssi should be defined with DEFINE_DEBUGFS_ATTRIBUTE Signed-off-by: Yihao Han <hanyihao@vivo.com> Link: https://lore.kernel.org/r/20220218070228.6210-1-hanyihao@vivo.com [fix indentation] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-03-11dmaengine: hisi_dma: fix MSI allocate fail when reload hisi_dmaJie Hai
Remove the loaded hisi_dma driver and reload it, the driver fails to work properly. The following error is reported in the kernel log: [ 1475.597609] hisi_dma 0000:7b:00.0: Failed to allocate MSI vectors! [ 1475.604915] hisi_dma: probe of 0000:7b:00.0 failed with error -28 As noted in "The MSI Driver Guide HOWTO"[1], the number of MSI interrupt must be a power of two. The Kunpeng DMA driver allocates 30 MSI interrupts. As a result, no space left on device is reported when the driver is reloaded and allocates interrupt vectors from the interrupt domain. This patch changes the number of interrupt vectors allocated by hisi_dma driver to 32 to avoid this problem. [1] https://www.kernel.org/doc/html/latest/PCI/msi-howto.html Fixes: e9f08b65250d ("dmaengine: hisilicon: Add Kunpeng DMA engine support") Signed-off-by: Jie Hai <haijie1@huawei.com> Acked-by: Zhou Wang <wangzhou1@hisilicon.com> Link: https://lore.kernel.org/r/20220216072101.34473-1-haijie1@huawei.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-03-11dmaengine: dw-axi-dmac: cleanup commentsTom Rix
For spdx, /* */ for *.h, remove extra space Replacements configurarion to configuration inerrupts to interrupts chanels to channels Signed-off-by: Tom Rix <trix@redhat.com> Link: https://lore.kernel.org/r/20220309020056.1026106-1-trix@redhat.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-03-11dmaengine: fsl-dpaa2-qdma: Drop comma after SoC match table sentinelGeert Uytterhoeven
It does not make sense to have a comma after a sentinel, as any new elements must be added before the sentinel. Add a comment to clarify the purpose of the empty element. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/0b8ad4dcc185aa7a17655983e0eb5690d8fed460.1646311558.git.geert+renesas@glider.be Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-03-11dmaengine: ppc4xx: Make use of the helper macro LIST_HEAD()Cai Huoqing
Replace "struct list_head head = LIST_HEAD_INIT(head)" with "LIST_HEAD(head)" to simplify the code. Signed-off-by: Cai Huoqing <cai.huoqing@linux.dev> Link: https://lore.kernel.org/r/20220209032221.37211-1-cai.huoqing@linux.dev Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-03-11coresight: Drop unused 'none' enum value for each componentAnshuman Khandual
CORESIGHT_DEV_TYPE_NONE/CORESIGHT_DEV_SUBTYPE_XXXX_NONE values are not used any where. Actual enumeration can start from 0. Just drop these unused enum values. Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Suzuki K Poulose <suzuki.poulose@arm.com> Cc: Mike Leach <mike.leach@linaro.org> Cc: Leo Yan <leo.yan@linaro.org> Cc: coresight@lists.linaro.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com> Link: https://lore.kernel.org/r/1645005118-10561-1-git-send-email-anshuman.khandual@arm.com Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
2022-03-11coresight: etm3x: Don't trace PID for non-root PID namespaceLeo Yan
ETMv3 driver enables PID tracing by directly using perf config from userspace, this means the tracer will capture PID packets from root namespace but the profiling session runs in non-root PID namespace. Finally, the recorded packets can mislead perf reporting with the mismatched PID values. This patch changes to only enable PID tracing for root PID namespace. Note, the hardware supports VMID tracing from ETMv3.5, but the driver never enables VMID trace, this patch doesn't handle VMID trace (bit 30 in ETMCR register) particularly. Signed-off-by: Leo Yan <leo.yan@linaro.org> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Link: https://lore.kernel.org/r/20220204152403.71775-5-leo.yan@linaro.org
2022-03-11coresight: etm4x: Don't trace PID for non-root PID namespaceLeo Yan
When runs in perf mode, the driver always enables the PID tracing. This can lead confusion when the profiling session runs in non-root PID namespace, whereas it records the PIDs from the root PID namespace. To avoid confusion for PID tracing, when runs in perf mode, this patch changes to only enable PID tracing for root PID namespace. As result, after apply this patch, the perf tool reports PID as '-1' for all samples: # unshare --fork --pid perf record -e cs_etm// -m 64K,64K -a \ -o perf_test.data -- uname # perf report -i perf_test.data --itrace=Zi1000i --stdio # Total Lost Samples: 0 # # Samples: 94 of event 'instructions' # Event count (approx.): 94000 # # Overhead Command Shared Object Symbol # ........ ....... ................. .............................. # 68.09% :-1 [kernel.kallsyms] [k] __sched_text_end 3.19% :-1 [kernel.kallsyms] [k] hrtimer_interrupt 2.13% :-1 [kernel.kallsyms] [k] __bitmap_and 2.13% :-1 [kernel.kallsyms] [k] trace_vbprintk 1.06% :-1 [kernel.kallsyms] [k] __fget_files 1.06% :-1 [kernel.kallsyms] [k] __schedule 1.06% :-1 [kernel.kallsyms] [k] __softirqentry_text_start 1.06% :-1 [kernel.kallsyms] [k] __update_load_avg_cfs_rq 1.06% :-1 [kernel.kallsyms] [k] __update_load_avg_se 1.06% :-1 [kernel.kallsyms] [k] arch_counter_get_cntpct 1.06% :-1 [kernel.kallsyms] [k] check_and_switch_context 1.06% :-1 [kernel.kallsyms] [k] format_decode 1.06% :-1 [kernel.kallsyms] [k] handle_percpu_devid_irq 1.06% :-1 [kernel.kallsyms] [k] irq_enter_rcu 1.06% :-1 [kernel.kallsyms] [k] irqtime_account_irq 1.06% :-1 [kernel.kallsyms] [k] ktime_get 1.06% :-1 [kernel.kallsyms] [k] ktime_get_coarse_real_ts64 1.06% :-1 [kernel.kallsyms] [k] memmove 1.06% :-1 [kernel.kallsyms] [k] perf_ioctl 1.06% :-1 [kernel.kallsyms] [k] perf_output_begin 1.06% :-1 [kernel.kallsyms] [k] perf_output_copy 1.06% :-1 [kernel.kallsyms] [k] profile_tick 1.06% :-1 [kernel.kallsyms] [k] sched_clock 1.06% :-1 [kernel.kallsyms] [k] timerqueue_add 1.06% :-1 [kernel.kallsyms] [k] trace_save_cmdline 1.06% :-1 [kernel.kallsyms] [k] update_load_avg 1.06% :-1 [kernel.kallsyms] [k] vbin_printf Signed-off-by: Leo Yan <leo.yan@linaro.org> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Link: https://lore.kernel.org/r/20220204152403.71775-4-leo.yan@linaro.org
2022-03-11coresight: etm4x: Don't use virtual contextID for non-root PID namespaceLeo Yan
As commented in the function ctxid_pid_store(), it can cause the PID values mismatching between context ID tracing and PID allocated in a non-root namespace. For this reason, when a process runs in non-root PID namespace, the driver doesn't allow PID tracing and returns failure when access contextID related sysfs nodes. VMID works for virtual contextID when the kernel runs in EL2 mode with VHE; on the other hand, the driver doesn't prevent users from accessing it when programs run in the non-root namespace. Thus this can lead to same issues with contextID described above. This patch imposes the checking on VMID related sysfs knobs and returns failure if current process runs in non-root PID namespace. Signed-off-by: Leo Yan <leo.yan@linaro.org> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Link: https://lore.kernel.org/r/20220204152403.71775-3-leo.yan@linaro.org
2022-03-11coresight: etm4x: Add lock for reading virtual context ID comparatorLeo Yan
Updates to the values and the index are protected via the spinlock. Ensure we use the same lock to read the value safely. Signed-off-by: Leo Yan <leo.yan@linaro.org> Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Link: https://lore.kernel.org/r/20220204152403.71775-2-leo.yan@linaro.org
2022-03-11coresight: trbe: Move check for kernel page table isolation from EL0 to probeSudeep Holla
Currently with the check present in the module initialisation, it shouts on all the systems irrespective of presence of coresight trace buffer extensions. Similar to Arm SPE perf driver, move the check for kernel page table isolation from EL0 to the device probe stage instead of the module initialisation so that it complains only on the systems that support TRBE. Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Suzuki K Poulose <suzuki.poulose@arm.com> Cc: Mike Leach <mike.leach@linaro.org> Cc: Leo Yan <leo.yan@linaro.org> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: coresight@lists.linaro.org Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com> Link: https://lore.kernel.org/r/20220203190159.3145272-1-sudeep.holla@arm.com Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
2022-03-11coresight: no-op refactor to make INSTP0 check more idiomaticJames Clark
The spec says this: P0 tracing support field. The permitted values are: 0b00 Tracing of load and store instructions as P0 elements is not supported. 0b11 Tracing of load and store instructions as P0 elements is supported, so TRCCONFIGR.INSTP0 is supported. All other values are reserved. The value we are looking for is 0b11 so simplify this. The double read and && was a bit obfuscated. Suggested-by: Suzuki Poulose <suzuki.poulose@arm.com> Signed-off-by: James Clark <james.clark@arm.com> Link: https://lore.kernel.org/r/20220203115336.119735-2-james.clark@arm.com Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
2022-03-11hwtracing: coresight: Replace acpi_bus_get_device()Rafael J. Wysocki
Replace acpi_bus_get_device() that is going to be dropped with acpi_fetch_acpi_dev(). No intentional functional impact. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Link: https://lore.kernel.org/r/5790600.lOV4Wx5bFT@kreacher Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
2022-03-11coresight: syscfg: Fix memleak on registration failure in cscfg_create_deviceMiaoqian Lin
device_register() calls device_initialize(), according to doc of device_initialize: Use put_device() to give up your reference instead of freeing * @dev directly once you have called this function. To prevent potential memleak, use put_device() for error handling. Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Fixes: 85e2414c518a ("coresight: syscfg: Initial coresight system configuration") Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20220124124121.8888-1-linmq006@gmail.com Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
2022-03-11coresight: Fix TRCCONFIGR.QE sysfs interfaceJames Clark
It's impossible to program a valid value for TRCCONFIGR.QE when TRCIDR0.QSUPP==0b10. In that case the following is true: Q element support is implemented, and only supports Q elements without instruction counts. TRCCONFIGR.QE can only take the values 0b00 or 0b11. Currently the low bit of QSUPP is checked to see if the low bit of QE can be written to, but as you can see when QSUPP==0b10 the low bit is cleared making it impossible to ever write the only valid value of 0b11 to QE. 0b10 would be written instead, which is a reserved QE value even for all values of QSUPP. The fix is to allow writing the low bit of QE for any non zero value of QSUPP. This change also ensures that the low bit is always set, even when the user attempts to only set the high bit. Signed-off-by: James Clark <james.clark@arm.com> Reviewed-by: Mike Leach <mike.leach@linaro.org> Fixes: d8c66962084f ("coresight-etm4x: Controls pertaining to the reset, mode, pe and events") Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20220120113047.2839622-2-james.clark@arm.com Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
2022-03-11coresight: trbe: Work around the trace data corruptionAnshuman Khandual
TRBE implementations affected by Arm erratum #1902691 might corrupt trace data or deadlock, when it's being written into the memory. Workaround this problem in the driver, by preventing TRBE initialization on affected cpus. The firmware must have disabled the access to TRBE for the kernel on such implementations. This will cover the kernel for any firmware that doesn't do this already. This just updates the TRBE driver as required. Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will@kernel.org> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Suzuki Poulose <suzuki.poulose@arm.com> Cc: coresight@lists.linaro.org Cc: linux-doc@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com> Link: https://lore.kernel.org/r/1643120437-14352-8-git-send-email-anshuman.khandual@arm.com Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
2022-03-11coresight: trbe: Work around the invalid prohibited statesAnshuman Khandual
TRBE implementations affected by Arm erratum #2038923 might get TRBE into an inconsistent view on whether trace is prohibited within the CPU. As a result, the trace buffer or trace buffer state might be corrupted. This happens after TRBE buffer has been enabled by setting TRBLIMITR_EL1.E, followed by just a single context synchronization event before execution changes from a context, in which trace is prohibited to one where it isn't, or vice versa. In these mentioned conditions, the view of whether trace is prohibited is inconsistent between parts of the CPU, and the trace buffer or the trace buffer state might be corrupted. Work around this problem in the TRBE driver by preventing an inconsistent view of whether the trace is prohibited or not based on TRBLIMITR_EL1.E by immediately following a change to TRBLIMITR_EL1.E with at least one ISB instruction before an ERET, or two ISB instructions if no ERET is to take place. This just updates the TRBE driver as required. Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will@kernel.org> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Suzuki Poulose <suzuki.poulose@arm.com> Cc: coresight@lists.linaro.org Cc: linux-doc@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com> Link: https://lore.kernel.org/r/1643120437-14352-7-git-send-email-anshuman.khandual@arm.com Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
2022-03-11coresight: trbe: Work around the ignored system register writesAnshuman Khandual
TRBE implementations affected by Arm erratum #2064142 might fail to write into certain system registers after the TRBE has been disabled. Under some conditions after TRBE has been disabled, writes into certain TRBE registers TRBLIMITR_EL1, TRBPTR_EL1, TRBBASER_EL1, TRBSR_EL1 and TRBTRG_EL1 will be ignored and not be effected. Work around this problem in the TRBE driver by executing TSB CSYNC and DSB just after the trace collection has stopped and before performing a system register write to one of the affected registers. This just updates the TRBE driver as required. Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will@kernel.org> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Suzuki Poulose <suzuki.poulose@arm.com> Cc: coresight@lists.linaro.org Cc: linux-doc@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com> Link: https://lore.kernel.org/r/1643120437-14352-6-git-send-email-anshuman.khandual@arm.com Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
2022-03-11dmaengine: idxd: Remove useless DMA-32 fallback configurationChristophe JAILLET
As stated in [1], dma_set_mask() with a 64-bit mask never fails if dev->dma_mask is non-NULL. So, if it fails, the 32 bits case will also fail for the same reason. Simplify code and remove some dead code accordingly. [1]: https://lore.kernel.org/linux-kernel/YL3vSPK5DXTNvgdx@infradead.org/#t Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Acked-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/009c80294dba72858cd8a6ed2ed81041df1b1e82.1642231430.git.christophe.jaillet@wanadoo.fr Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-03-11dmaengine: qcom_hidma: Remove useless DMA-32 fallback configurationChristophe JAILLET
As stated in [1], dma_set_mask() with a 64-bit mask never fails if dev->dma_mask is non-NULL. So, if it fails, the 32 bits case will also fail for the same reason. Simplify code and remove some dead code accordingly. [1]: https://lore.kernel.org/linux-kernel/YL3vSPK5DXTNvgdx@infradead.org/#t Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/4deb32b0c7838da66608022c584326eb01d0da03.1642232106.git.christophe.jaillet@wanadoo.fr Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-03-11Merge branch irq/aic-v2 into irq/irqchip-nextMarc Zyngier
* irq/aic-v2: : . : Add support for the interrupt controller found is the latest : incarnation of Apple M1 systems, courtesy of Hector Martin. : . irqchip/apple-aic: Add support for AICv2 irqchip/apple-aic: Support multiple dies irqchip/apple-aic: Dynamically compute register offsets irqchip/apple-aic: Switch to irq_domain_create_tree and sparse hwirqs irqchip/apple-aic: Add Fast IPI support dt-bindings: interrupt-controller: apple,aic2: New binding for AICv2 PCI: apple: Change MSI handling to handle 4-cell AIC fwspec form Signed-off-by: Marc Zyngier <maz@kernel.org>
2022-03-11irqchip/apple-aic: Add support for AICv2Hector Martin
Introduce support for the new AICv2 hardware block in t6000/t6001 SoCs. It seems these blocks are missing the information required to compute the event register offset in the capability registers, so we specify that in the DT as a second reg entry. Signed-off-by: Hector Martin <marcan@marcan.st> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20220309192123.152028-8-marcan@marcan.st
2022-03-11irqchip/apple-aic: Support multiple diesHector Martin
Multi-die support in AICv2 uses several sets of IRQ registers. Introduce a die count and compute the register group offset based on the die ID field of the hwirq number, as reported by the hardware. Signed-off-by: Hector Martin <marcan@marcan.st> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20220309192123.152028-7-marcan@marcan.st
2022-03-11irqchip/apple-aic: Dynamically compute register offsetsHector Martin
This allows us to support AIC variants with different numbers of IRQs based on capability registers. Signed-off-by: Hector Martin <marcan@marcan.st> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20220309192123.152028-6-marcan@marcan.st
2022-03-11irqchip/apple-aic: Switch to irq_domain_create_tree and sparse hwirqsHector Martin
This allows us to directly use the hardware event number as the hwirq number. Since IRQ events have bit 16 set (type=1), FIQs now move to starting at hwirq number 0. This will become more important once multi-die support is introduced in a later commit. Signed-off-by: Hector Martin <marcan@marcan.st> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20220309192123.152028-5-marcan@marcan.st
2022-03-11irqchip/apple-aic: Add Fast IPI supportHector Martin
The newer AICv2 present in t600x SoCs does not have legacy IPI support at all. Since t8103 also supports Fast IPIs, implement support for this first. The legacy IPI code is left as a fallback, so it can be potentially used by older SoCs in the future. The vIPI code is shared; only the IPI firing/acking bits change for Fast IPIs. Signed-off-by: Hector Martin <marcan@marcan.st> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20220309192123.152028-4-marcan@marcan.st
2022-03-10net/mlx5e: Remove overzealous validations in netlink EEPROM queryGal Pressman
Unlike the legacy EEPROM callbacks, when using the netlink EEPROM query (get_module_eeprom_by_page) the driver should not try to validate the query parameters, but just perform the read requested by the userspace. Recent discussion in the mailing list: https://lore.kernel.org/netdev/20220120093051.70845141@kicinski-fedora-PC1C0HJN.hsd1.ca.comcast.net/ Signed-off-by: Gal Pressman <gal@nvidia.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Maxim Mikityanskiy <maximmi@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-03-10net/mlx5: Parse module mapping using mlx5_ifcGal Pressman
The assumption that the first byte in the module mapping dword is the module number shouldn't be hard-coded in the driver, but come from mlx5_ifc structs. While at it, fix the incorrect width for the 'rx_lane' and 'tx_lane' fields. Signed-off-by: Gal Pressman <gal@nvidia.com> Reviewed-by: Maxim Mikityanskiy <maximmi@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
generated by cgit (git 2.34.1) at 2025-10-02 21:08:35 +0000