| Age | Commit message (Collapse) | Author |
|---|
|
Commit 9ecc2d86171a ("net/mlx4_en: add xdp forwarding and data write support")
brought another indirect call in fast path.
Use INDIRECT_CALL_2() helper to avoid the cost of the indirect call
when/if CONFIG_RETPOLINE=y
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Tariq Toukan <tariqt@mellanox.com>
Cc: Willem de Bruijn <willemb@google.com>
Reviewed-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In fine adjustement mode, which is the current default, the sub-second
increment register is the number of nanoseconds that will be added to
the clock when the accumulator overflows. At each clock cycle, the
value of the addend register is added to the accumulator.
Currently, we use 20ns = 1e09ns / 50MHz as this value whatever the
frequency of the ptp clock actually is.
The adjustment is then done on the addend register, only incrementing
every X clock cycles X being the ratio between 50MHz and ptp_clock_rate
(addend = 2^32 * 50MHz/ptp_clock_rate).
This causes the following issues :
- In case the frequency of the ptp clock is inferior or equal to 50MHz,
the addend value calculation will overflow and the default
addend value will be set to 0, causing the clock to not work at
all. (For instance, for ptp_clock_rate = 50MHz, addend = 2^32).
- The resolution of the timestamping clock is limited to 20ns while it
is not needed, thus limiting the accuracy of the timestamping to
20ns.
Fix this by setting sub-second increment to 2e09ns / ptp_clock_rate.
It will allow to reach the minimum possible frequency for
ptp_clk_ref, which is 5MHz for GMII 1000Mps Full-Duplex by setting the
sub-second-increment to a higher value. For instance, for 25MHz, it
gives ssinc = 80ns and default_addend = 2^31.
It will also allow to use a lower value for sub-second-increment, thus
improving the timestamping accuracy with frequencies higher than
100MHz, for instance, for 200MHz, ssinc = 10ns and default_addend =
2^31.
v1->v2:
- Remove modifications to the calculation of default addend, which broke
compatibility with clock frequencies for which 2000000000 / ptp_clk_freq
is not an integer.
- Modify description according to discussions.
Signed-off-by: Julien Beraud <julien.beraud@orolia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
There are 2 registers to write to enable a ptp ref clock coming from the
fpga.
One that enables the usage of the clock from the fpga for emac0 and emac1
as a ptp ref clock, and the other to allow signals from the fpga to reach
emac0 and emac1.
Currently, if the dwmac-socfpga has phymode set to PHY_INTERFACE_MODE_MII,
PHY_INTERFACE_MODE_GMII, or PHY_INTERFACE_MODE_SGMII, both registers will
be written and the ptp ref clock will be set as coming from the fpga.
Separate the 2 register writes to only enable signals from the fpga to
reach emac0 or emac1 when ptp ref clock is not coming from the fpga.
Signed-off-by: Julien Beraud <julien.beraud@orolia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
i2400mu_bus_bm_wait_for_ack() invokes usb_get_urb(), which increases the
refcount of the "notif_urb".
When i2400mu_bus_bm_wait_for_ack() returns, local variable "notif_urb"
becomes invalid, so the refcount should be decreased to keep refcount
balanced.
The issue happens in all paths of i2400mu_bus_bm_wait_for_ack(), which
forget to decrease the refcnt increased by usb_get_urb(), causing a
refcnt leak.
Fix this issue by calling usb_put_urb() before the
i2400mu_bus_bm_wait_for_ack() returns.
Signed-off-by: Xiyu Yang <xiyuyang19@fudan.edu.cn>
Signed-off-by: Xin Tan <tanxin.ctf@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Seven fixes: three in target, one on a sg error leg, two in qla2xxx
fixing warnings introduced in the last merge window and updating
MAINTAINERS and one in hisi_sas fixing a problem introduced by libata"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: sg: add sg_remove_request in sg_common_write
scsi: target: tcmu: reset_ring should reset TCMU_DEV_BIT_BROKEN
scsi: target: fix PR IN / READ FULL STATUS for FC
scsi: target: Write NULL to *port_nexus_ptr if no ISID
scsi: MAINTAINERS: Update qla2xxx FC-SCSI driver maintainer
scsi: qla2xxx: Fix regression warnings
scsi: hisi_sas: Fix build error without SATA_HOST
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon fixes from Guenter Roeck:
- Fix up chip IDs (isl68137)
- error handling for invalid temperatures and use true module name
(drivetemp)
- Fix static symbol warnings (k10temp)
- Use valid hwmon device name (jc42)
* tag 'hwmon-for-v5.7-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (jc42) Fix name to have no illegal characters
hwmon: (k10temp) make some symbols static
hwmon: (drivetemp) Return -ENODATA for invalid temperatures
hwmon: (drivetemp) Use drivetemp's true module name in Kconfig section
hwmon: (pmbus/isl68137) Fix up chip IDs
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"Some driver bugfixes and an old API removal now that all users are
gone"
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: tegra: Synchronize DMA before termination
i2c: tegra: Better handle case where CPU0 is busy for a long time
i2c: remove i2c_new_probed_device API
i2c: altera: use proper variable to hold errno
i2c: designware: platdrv: Remove DPM_FLAG_SMART_SUSPEND flag on BYT and CHT
|
|
Pull drm fixes from Dave Airlie:
"Quiet enough for rc2, mostly amdgpu fixes, a couple of i915 fixes, and
one nouveau module firmware fix:
i915:
- Fix guest page access by using the brand new VFIO dma r/w interface (Yan)
- Fix for i915 perf read buffers (Ashutosh)
amdgpu:
- gfx10 fix
- SMU7 overclocking fix
- RAS fix
- GPU reset fix
- Fix a regression in a previous suspend/resume fix
- Add a gfxoff quirk
nouveau:
- fix missing MODULE_FIRMWARE"
* tag 'drm-fixes-2020-04-18' of git://anongit.freedesktop.org/drm/drm:
drm/nouveau/sec2/gv100-: add missing MODULE_FIRMWARE()
drm/amdgpu/gfx9: add gfxoff quirk
drm/amdgpu: fix the hw hang during perform system reboot and reset
drm/i915/gvt: switch to user vfio_group_pin/upin_pages
drm/i915/gvt: subsitute kvm_read/write_guest with vfio_dma_rw
drm/i915/gvt: hold reference of VFIO group during opening of vgpu
drm/i915/perf: Do not clear pollin for small user read buffers
drm/amdgpu: fix wrong vram lost counter increment V2
drm/amd/powerplay: unload mp1 for Arcturus RAS baco reset
drm/amd/powerplay: force the trim of the mclk dpm_levels if OD is enabled
Revert "drm/amdgpu: change SH MEM alignment mode for gfx10"
|
|
The jc42 driver passes I2C client's name as hwmon device name. In case
of device tree probed devices this ends up being part of the compatible
string, "jc-42.4-temp". This name contains hyphens and the hwmon core
doesn't like this:
jc42 2-0018: hwmon: 'jc-42.4-temp' is not a valid name attribute, please fix
This changes the name to "jc42" which doesn't have any illegal
characters.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Link: https://lore.kernel.org/r/20200417092853.31206-1-s.hauer@pengutronix.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Zero Port's PBN together with VCPI slots when releasing
allocated VCPI slots. That way when disabling the connector
it will not cause issues in drm_dp_mst_atomic_check verifying
branch bw limit.
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Fixes: cd82d82cbc04 ("drm/dp_mst: Add branch bandwidth validation to MST atomic check")
Cc: <stable@vger.kernel.org> # v5.6+
Link: https://patchwork.freedesktop.org/patch/msgid/20200407160717.27976-1-mikita.lipski@amd.com
|
|
Mirror what we do for i2c display buses.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
We were registering the aux device in the MST late_register
rather than the regular one.
v2: handle eDP as well
Fixes: 405a1f9090d1ac ("drm/amdgpu/display: split dp connector registration (v4)")
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1100
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
|
|
table v0 (e.g Hawaii)
Initialize thermal controller fields in the PowerPlay table for Hawaii
GPUs, so that fan speeds are reported.
Signed-off-by: Sandeep Raghuraman <sandy.8925@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
When the amdgpu in the suspend/resume loop need notify the dpm disabled,
otherwise the smu table will be uninitialize and result in resume failed.
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Tested-by: Mengbing Wang <Mengbing.Wang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux
Pull mtd fix from Richard Weinberger:
"spi-nor: fix for missing directory after code refactoring"
* tag 'mtd/fixes-for-5.7-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux:
mtd: spi-nor: Compile files in controllers/ directory
|
|
git://www.linux-watchdog.org/linux-watchdog
Pull watchdog fix from Wim Van Sebroeck:
"Fix restart handler in sp805 driver"
* tag 'linux-watchdog-5.7-rc2' of git://www.linux-watchdog.org/linux-watchdog:
watchdog: sp805: fix restart handler
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree fixes from Rob Herring:
- Fix warnings from enabling more dtc warnings which landed in the
merge window and didn't get fixed in time.
- Fix some document references from DT schema conversions
- Fix kmemleak errors in DT unittests
* tag 'devicetree-fixes-for-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (23 commits)
kbuild: check libyaml installation for 'make dt_binding_check'
of: unittest: kmemleak in duplicate property update
of: overlay: kmemleak in dup_and_fixup_symbol_prop()
of: unittest: kmemleak in of_unittest_overlay_high_level()
of: unittest: kmemleak in of_unittest_platform_populate()
of: unittest: kmemleak on changeset destroy
MAINTAINERS: dt: fix pointers for ARM Integrator, Versatile and RealView
MAINTAINERS: dt: update display/allwinner file entry
dt-bindings: iio: dac: AD5570R fix bindings errors
dt-bindings: Fix misspellings of "Analog Devices"
dt-bindings: pwm: Fix cros-ec-pwm example dtc 'reg' warning
docs: dt: rockchip,dwc3.txt: fix a pointer to a renamed file
docs: dt: fix a broken reference for a file converted to json
docs: dt: qcom,dwc3.txt: fix cross-reference for a converted file
docs: dt: fix broken reference to phy-cadence-torrent.yaml
dt-bindings: interrupt-controller: Fix loongson,parent_int_map property schema
dt-bindings: hwmon: Fix incorrect $id paths
dt-bindings: Fix dtc warnings on reg and ranges in examples
dt-bindings: BD718x7 - add missing I2C bus properties
dt-bindings: clock: syscon-icst: Remove unneeded unit name
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen update from Juergen Gross:
- a small cleanup patch
- a security fix for a bug in the Xen hypervisor to avoid enabling Xen
guests to crash dom0 on an unfixed hypervisor.
* tag 'for-linus-5.7-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
arm/xen: make _xen_start_info static
xen/xenbus: ensure xenbus_map_ring_valloc() returns proper grant status
|
|
Pull block fixes from Jens Axboe:
- Fix for a driver tag leak in error handling (John)
- Remove now defunct Kconfig selection from dasd (Stefan)
- blk-wbt trace fiexs (Tommi)
* tag 'block-5.7-2020-04-17' of git://git.kernel.dk/linux-block:
blk-wbt: Drop needless newlines from tracepoint format strings
blk-wbt: Use tracepoint_string() for wbt_step tracepoint string literals
s390/dasd: remove IOSCHED_DEADLINE from DASD Kconfig
blk-mq: Put driver tag in blk_mq_dispatch_rq_list() when no budget
|
|
Pull libata fixlet from Jens Axboe:
"Add yet another Comet Lake PCI ID for ahci"
* tag 'libata-5.7-2020-04-17' of git://git.kernel.dk/linux-block:
ahci: Add Intel Comet Lake PCH-U PCI ID
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management update from Rafael Wysocki:
"Allow the operating performance points (OPP) core to be used in the
case when the same driver is used on different platforms, some of
which have an OPP table and some of which have a clock node (Rajendra
Nayak)"
* tag 'pm-5.7-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
opp: Manage empty OPP tables with clk handle
|
|
Compile-testing the driver can result in a link failure
when CONFIG_SOC_BUS is disabled:
x86_64-linux-ld: drivers/soc/imx/soc-imx8m.o: in function `imx8_soc_init':
soc-imx8m.c:(.init.text+0x28d): undefined reference to `soc_device_register'
Select it from Kconfig, as we do from the other SoC drivers.
Link: https://lore.kernel.org/r/20200409075208.2824062-1-arnd@arndb.de
Fixes: fc40200ebf82 ("soc: imx: increase build coverage for imx8m soc driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
A 1024 byte variable on the stack will warn on any 32-bit architecture
during compile-testing, and is generally a bad idea anyway:
fsl/dpio/dpio-service.c: In function 'dpaa2_io_service_enqueue_multiple_desc_fq':
fsl/dpio/dpio-service.c:495:1: error: the frame size of 1032 bytes is larger than 1024 bytes [-Werror=frame-larger-than=]
There are currently no callers of this function, so I cannot tell whether
dynamic memory allocation is allowed once callers are added. Change
it to kcalloc for now, if anyone gets a warning about calling this in
atomic context after they start using it, they can fix it later.
Link: https://lore.kernel.org/r/20200408185834.434784-1-arnd@arndb.de
Fixes: 9d98809711ae ("soc: fsl: dpio: Adding QMAN multiple enqueue interface")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Building dpio for 32 bit shows a new compiler warning from converting
a pointer to a u64:
drivers/soc/fsl/dpio/qbman-portal.c: In function 'qbman_swp_enqueue_multiple_desc_direct':
drivers/soc/fsl/dpio/qbman-portal.c:870:14: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
870 | addr_cena = (uint64_t)s->addr_cena;
The variable is not used anywhere, so removing the assignment seems
to be the correct workaround. After spotting what seemed to be
some confusion about address spaces, I ran the file through sparse,
which showed more warnings:
drivers/soc/fsl/dpio/qbman-portal.c:756:42: warning: incorrect type in argument 1 (different address spaces)
drivers/soc/fsl/dpio/qbman-portal.c:756:42: expected void const volatile [noderef] <asn:2> *addr
drivers/soc/fsl/dpio/qbman-portal.c:756:42: got unsigned int [usertype] *[assigned] p
drivers/soc/fsl/dpio/qbman-portal.c:902:42: warning: incorrect type in argument 1 (different address spaces)
drivers/soc/fsl/dpio/qbman-portal.c:902:42: expected void const volatile [noderef] <asn:2> *addr
drivers/soc/fsl/dpio/qbman-portal.c:902:42: got unsigned int [usertype] *[assigned] p
Here, the problem is passing a token from memremap() into __raw_readl(),
which is only defined to work on MMIO addresses but not RAM. Turning
this into a simple pointer dereference avoids this warning as well.
Link: https://lore.kernel.org/r/20200408185904.460563-1-arnd@arndb.de
Fixes: 3b2abda7d28c ("soc: fsl: dpio: Replace QMAN array mode with ring mode enqueue")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
CONFIG_IOSCHED_DEADLINE was removed with
commit f382fb0bcef4 ("block: remove legacy IO schedulers")
and setting of the scheduler was removed with
commit a5fd8ddce2af ("s390/dasd: remove setting of scheduler from driver").
So get rid of the select.
Reported-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Fix the following sparse warning:
drivers/platform/x86/intel-uncore-frequency.c:56:16: warning: symbol
'uncore_root_kobj' was not declared. Should it be static?
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Fix sparse warnings:
drivers/platform/x86/xiaomi-wmi.c:26:5: warning: symbol 'xiaomi_wmi_probe' was not declared. Should it be static?
drivers/platform/x86/xiaomi-wmi.c:51:6: warning: symbol 'xiaomi_wmi_notify' was not declared. Should it be static?
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
The i2c_acpi_new_device() function never returns NULL, it returns error
pointers.
Fixes: b1f81b496b0d ("platform/x86: surface3_power: MSHW0011 rev-eng implementation")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
kmemleak reports several memory leaks from devicetree unittest.
This is the fix for problem 5 of 5.
When overlay 'overlay_bad_add_dup_prop' is applied, the apply code
properly detects that a memory leak will occur if the overlay is removed
since the duplicate property is located in a base devicetree node and
reports via printk():
OF: overlay: WARNING: memory leak will occur if overlay removed, property: /testcase-data-2/substation@100/motor-1/rpm_avail
OF: overlay: WARNING: memory leak will occur if overlay removed, property: /testcase-data-2/substation@100/motor-1/rpm_avail
The overlay is removed when the apply code detects multiple changesets
modifying the same property. This is reported via printk():
OF: overlay: ERROR: multiple fragments add, update, and/or delete property /testcase-data-2/substation@100/motor-1/rpm_avail
As a result of this error, the overlay is removed resulting in the
expected memory leak.
Add another device node level to the overlay so that the duplicate
property is located in a node added by the overlay, thus no memory
leak will occur when the overlay is removed.
Thus users of kmemleak will not have to debug this leak in the future.
Fixes: 2fe0e8769df9 ("of: overlay: check prevents multiple fragments touching same property")
Reported-by: Erhard F. <erhard_f@mailbox.org>
Signed-off-by: Frank Rowand <frank.rowand@sony.com>
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
kmemleak reports several memory leaks from devicetree unittest.
This is the fix for problem 4 of 5.
target_path was not freed in the non-error path.
Fixes: e0a58f3e08d4 ("of: overlay: remove a dependency on device node full_name")
Reported-by: Erhard F. <erhard_f@mailbox.org>
Signed-off-by: Frank Rowand <frank.rowand@sony.com>
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
kmemleak reports several memory leaks from devicetree unittest.
This is the fix for problem 3 of 5.
of_unittest_overlay_high_level() failed to kfree the newly created
property when the property named 'name' is skipped.
Fixes: 39a751a4cb7e ("of: change overlay apply input data from unflattened to FDT")
Reported-by: Erhard F. <erhard_f@mailbox.org>
Signed-off-by: Frank Rowand <frank.rowand@sony.com>
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
kmemleak reports several memory leaks from devicetree unittest.
This is the fix for problem 2 of 5.
of_unittest_platform_populate() left an elevated reference count for
grandchild nodes (which are platform devices). Fix the platform
device reference counts so that the memory will be freed.
Fixes: fb2caa50fbac ("of/selftest: add testcase for nodes with same name and address")
Reported-by: Erhard F. <erhard_f@mailbox.org>
Signed-off-by: Frank Rowand <frank.rowand@sony.com>
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
kmemleak reports several memory leaks from devicetree unittest.
This is the fix for problem 1 of 5.
of_unittest_changeset() reaches deeply into the dynamic devicetree
functions. Several nodes were left with an elevated reference
count and thus were not properly cleaned up. Fix the reference
counts so that the memory will be freed.
Fixes: 201c910bd689 ("of: Transactional DT support.")
Reported-by: Erhard F. <erhard_f@mailbox.org>
Signed-off-by: Frank Rowand <frank.rowand@sony.com>
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
virtio_blk uses VIRTIO_RING_F_INDIRECT_DESC, pull in
the header defining that value.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
hinting
It can be confusing to have multiple features within the same driver that
are using the same verbage. As such this patch is creating a union of
free_page_report_cmd_id with free_page_hint_cmd_id so that we can clean-up
the userspace code a bit in terms of readability while maintaining the
functionality of legacy code.
Signed-off-by: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Link: https://lore.kernel.org/r/20200415174318.13597.99753.stgit@localhost.localdomain
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Fix the following sparse warning:
drivers/virtio/virtio_balloon.c:168:5: warning: symbol
'virtballoon_free_page_report' was not declared. Should it be static?
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Link: https://lore.kernel.org/r/20200409085047.45483-1-yanaijie@huawei.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
The function should be called only after a success calling for
vdpa_alloc_device().
Reported-by: Eli Cohen <eli@mellanox.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20200413093738.28467-1-jasowang@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
If user did not configure any vdpa drivers, neither vhost
nor virtio vdpa are going to be useful. So there's no point
in prompting for these and selecting vdpa core automatically.
Simplify configuration by making virtio and vhost vdpa
drivers depend on vdpa menu entry. Once done, we no longer
need a separate menu entry, so also get rid of this.
While at it, fix up the IFC entry: VDPA->vDPA for consistency
with other places.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
|
|
get_vq_align returns u16 now, but that's not enough for
systems/devices with 64K pages. All callers assign it to
a u32 variable anyway, so let's just change the return
value type to u32.
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
virtgpu_kms now uses VIRTIO_RING_F_INDIRECT_DESC, so it must
include virtio_ring.h directly.
Fixes: 5edbb5608256 ("drm/virtio: fix ring free check")
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Link: https://lore.kernel.org/r/20200407130542.0e3b5d9d@canb.auug.org.au
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
In preparation to virtio header changes, include slab.h directly as
this module is using it.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
In preparation to virtio header changes, include slab.h directly as
this module is using it.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
In preparation to virtio header changes, include slab.h directly as
this module is using it.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
In preparation to virtio header changes, include slab.h directly as
this module is using it.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
In preparation to virtio header changes, include slab.h directly as
this module is using it.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
In preparation to virtio header changes, include uaccess.h directly as
this file is using copy to/from user.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
The copy_to/from_user() functions return the number of bytes remaining
but we want to return negative error codes. I changed a couple checks
in raw_ioctl_ep_read() and raw_ioctl_ep0_read() to show that we still
we returning zero on error.
Fixes: f2c2e717642c ("usb: gadget: add raw-gadget interface")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Andrey Konovalov <andreyknvl@google.com>
Tested-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
|
|
If queue->size check in raw_event_queue_fetch() fails (which normally
shouldn't happen, that check is a fail-safe), the function returns
without reenabling interrupts. This patch fixes that issue, along with
propagating the cause of failure to the function caller.
Fixes: f2c2e717642c ("usb: gadget: add raw-gadget interface"
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
|
|
A DMA transfer can be in progress while vbus is lost due to a cable
disconnect. For endpoints that use DMA, this condition can lead to
peripheral hang. The patch ensures that endpoints are disabled before
the clocks are stopped to prevent this issue.
Fixes: a64ef71ddc13 ("usb: gadget: atmel_usba_udc: condition clocks to vbus state")
Signed-off-by: Cristian Birsan <cristian.birsan@microchip.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
|
|
|
