| Age | Commit message (Collapse) | Author |
|---|
|
Enable creation of a devlink port for EC VF vports.
Signed-off-by: Daniel Jurgens <danielj@nvidia.com>
Reviewed-by: William Tu <witu@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Instead of using type specific iterators which are only used in one place
just traverse the xarray. It will provide suitable ordering based on the
vport numbers. This will also eliminate the need for changes here when
new types are added.
Signed-off-by: Daniel Jurgens <danielj@nvidia.com>
Reviewed-by: William Tu <witu@nvidia.com>
Reviewed-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
With the recent feature added to enable perf events to use pseudo NMIs as
interrupts on platforms which support GICv3 or later, its now been
possible to enable hard lockup detector (or NMI watchdog) on arm64
platforms. So enable corresponding support.
One thing to note here is that normally lockup detector is initialized
just after the early initcalls but PMU on arm64 comes up much later as
device_initcall(). To cope with that, override
arch_perf_nmi_is_available() to let the watchdog framework know PMU not
ready, and inform the framework to re-initialize lockup detection once PMU
has been initialized.
[dianders@chromium.org: only HAVE_HARDLOCKUP_DETECTOR_PERF if the PMU config is enabled]
Link: https://lkml.kernel.org/r/20230523073952.1.I60217a63acc35621e13f10be16c0cd7c363caf8c@changeid
Link: https://lkml.kernel.org/r/20230519101840.v5.18.Ia44852044cdcb074f387e80df6b45e892965d4a1@changeid
Co-developed-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
Co-developed-by: Pingfan Liu <kernelfans@gmail.com>
Signed-off-by: Pingfan Liu <kernelfans@gmail.com>
Signed-off-by: Lecopzer Chen <lecopzer.chen@mediatek.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chen-Yu Tsai <wens@csie.org>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Colin Cross <ccross@android.com>
Cc: Daniel Thompson <daniel.thompson@linaro.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Guenter Roeck <groeck@chromium.org>
Cc: Ian Rogers <irogers@google.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masayoshi Mizuma <msys.mizuma@gmail.com>
Cc: Matthias Kaehlcke <mka@chromium.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: "Ravi V. Shankar" <ravi.v.shankar@intel.com>
Cc: Ricardo Neri <ricardo.neri@intel.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Stephen Boyd <swboyd@chromium.org>
Cc: Tzung-Bi Shih <tzungbi@chromium.org>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
We are now in a position where no caller of pin_user_pages() requires the
vmas parameter at all, so eliminate this parameter from the function and
all callers.
This clears the way to removing the vmas parameter from GUP altogether.
Link: https://lkml.kernel.org/r/195a99ae949c9f5cb589d2222b736ced96ec199a.1684350871.git.lstoakes@gmail.com
Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com> [qib]
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> [drivers/media]
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Janosch Frank <frankja@linux.ibm.com>
Cc: Jarkko Sakkinen <jarkko@kernel.org>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Sean Christopherson <seanjc@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
No invocation of pin_user_pages_remote() uses the vmas parameter, so
remove it. This forms part of a larger patch set eliminating the use of
the vmas parameters altogether.
Link: https://lkml.kernel.org/r/28f000beb81e45bf538a2aaa77c90f5482b67a32.1684350871.git.lstoakes@gmail.com
Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Janosch Frank <frankja@linux.ibm.com>
Cc: Jarkko Sakkinen <jarkko@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Sakari Ailus <sakari.ailus@linux.intel.com>
Cc: Sean Christopherson <seanjc@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "remove the vmas parameter from GUP APIs", v6.
(pin_/get)_user_pages[_remote]() each provide an optional output parameter
for an array of VMA objects associated with each page in the input range.
These provide the means for VMAs to be returned, as long as mm->mmap_lock
is never released during the GUP operation (i.e. the internal flag
FOLL_UNLOCKABLE is not specified).
In addition, these VMAs can only be accessed with the mmap_lock held and
become invalidated the moment it is released.
The vast majority of invocations do not use this functionality and of
those that do, all but one case retrieve a single VMA to perform checks
upon.
It is not egregious in the single VMA cases to simply replace the
operation with a vma_lookup(). In these cases we duplicate the (fast)
lookup on a slow path already under the mmap_lock, abstracted to a new
get_user_page_vma_remote() inline helper function which also performs
error checking and reference count maintenance.
The special case is io_uring, where io_pin_pages() specifically needs to
assert that the VMAs underlying the range do not result in broken
long-term GUP file-backed mappings.
As GUP now internally asserts that FOLL_LONGTERM mappings are not
file-backed in a broken fashion (i.e. requiring dirty tracking) - as
implemented in "mm/gup: disallow FOLL_LONGTERM GUP-nonfast writing to
file-backed mappings" - this logic is no longer required and so we can
simply remove it altogether from io_uring.
Eliminating the vmas parameter eliminates an entire class of danging
pointer errors that might have occured should the lock have been
incorrectly released.
In addition, the API is simplified and now clearly expresses what it is
intended for - applying the specified GUP flags and (if pinning) returning
pinned pages.
This change additionally opens the door to further potential improvements
in GUP and the possible marrying of disparate code paths.
I have run this series against gup_test with no issues.
Thanks to Matthew Wilcox for suggesting this refactoring!
This patch (of 6):
No invocation of get_user_pages() use the vmas parameter, so remove it.
The GUP API is confusing and caveated. Recent changes have done much to
improve that, however there is more we can do. Exporting vmas is a prime
target as the caller has to be extremely careful to preclude their use
after the mmap_lock has expired or otherwise be left with dangling
pointers.
Removing the vmas parameter focuses the GUP functions upon their primary
purpose - pinning (and outputting) pages as well as performing the actions
implied by the input flags.
This is part of a patch series aiming to remove the vmas parameter
altogether.
Link: https://lkml.kernel.org/r/cover.1684350871.git.lstoakes@gmail.com
Link: https://lkml.kernel.org/r/589e0c64794668ffc799651e8d85e703262b1e9d.1684350871.git.lstoakes@gmail.com
Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com>
Suggested-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Acked-by: Christian König <christian.koenig@amd.com> (for radeon parts)
Acked-by: Jarkko Sakkinen <jarkko@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Sean Christopherson <seanjc@google.com> (KVM)
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Cc: Janosch Frank <frankja@linux.ibm.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
In init_overlay_changeset(), the variable "node" is from
of_get_child_by_name(), and the "node" should be discarded in error case.
Fixes: d1651b03c2df ("of: overlay: add overlay symbols to live device tree")
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Link: https://lore.kernel.org/r/20230602020502.11693-1-hayashi.kunihiko@socionext.com
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Pull block fixes from Jens Axboe:
- Fix an issue with the hardware queue nr_active, causing it to become
imbalanced (Tian)
- Fix an issue with null_blk not releasing pages if configured as
memory backed (Nitesh)
- Fix a locking issue in dasd (Jan)
* tag 'block-6.4-2023-06-09' of git://git.kernel.dk/linux:
s390/dasd: Use correct lock while counting channel queue length
null_blk: Fix: memory release when memory_backed=1
blk-mq: fix blk_mq_hw_ctx active request accounting
|
|
Pull virtio bug fixes from Michael Tsirkin:
"A bunch of fixes all over the place"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
tools/virtio: use canonical ftrace path
vhost_vdpa: support PACKED when setting-getting vring_base
vhost: support PACKED when setting-getting vring_base
vhost: Fix worker hangs due to missed wake up calls
vhost: Fix crash during early vhost_transport_send_pkt calls
vhost_net: revert upend_idx only on retriable error
vhost_vdpa: tell vqs about the negotiated
vdpa/mlx5: Fix hang when cvq commands are triggered during device unregister
tools/virtio: Add .gitignore for ringtest
tools/virtio: Fix arm64 ringtest compilation error
vduse: avoid empty string for dev name
vhost: use kzalloc() instead of kmalloc() followed by memset()
|
|
Pull ceph fixes from Ilya Dryomov:
"A fix for a potential data corruption in differential backup and
snapshot-based mirroring scenarios in RBD and a reference counting
fixup to avoid use-after-free in CephFS, all marked for stable"
* tag 'ceph-for-6.4-rc6' of https://github.com/ceph/ceph-client:
ceph: fix use-after-free bug for inodes when flushing capsnaps
rbd: get snapshot context after exclusive lock is ensured to be held
rbd: move RBD_OBJ_FLAG_COPYUP_ENABLED flag setting
|
|
The lock around counting the channel queue length in the BIODASDINFO
ioctl was incorrectly changed to the dasd_block->queue_lock with commit
583d6535cb9d ("dasd: remove dead code"). This can lead to endless list
iterations and a subsequent crash.
The queue_lock is supposed to be used only for queue lists belonging to
dasd_block. For dasd_device related queue lists the ccwdev lock must be
used.
Fix the mentioned issues by correctly using the ccwdev lock instead of
the queue lock.
Fixes: 583d6535cb9d ("dasd: remove dead code")
Cc: stable@vger.kernel.org # v5.0+
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Link: https://lore.kernel.org/r/20230609153750.1258763-2-sth@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
If qaic_destroy_drm_device() is called before the device has fully
initialized it will cause a NULL pointer dereference as the drm device
has not yet been created. Fix this with a NULL check.
Fixes: c501ca23a6a3 ("accel/qaic: Add uapi and core driver file")
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com>
Reviewed-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230602210440.8411-3-quic_jhugo@quicinc.com
|
|
After user handle is allocated, if mutex is interrupted, we do not free
the user handle and return an error. Kref had been initialized, but not
added to users list, so device teardown would also not call free_usr.
Fixes: c501ca23a6a3 ("accel/qaic: Add uapi and core driver file")
Signed-off-by: Carl Vanderlip <quic_carlv@quicinc.com>
Reviewed-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230602210440.8411-2-quic_jhugo@quicinc.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Alexander Gordeev:
- Avoid linker error for randomly generated config file that has
CONFIG_BRANCH_PROFILE_NONE enabled and make it similar to riscv, x86
and also to commit 4bf3ec384edf ("s390: disable branch profiling for
vdso").
- Currently, if the device is offline and all the channel paths are
either configured or varied offline, the associated subchannel gets
unregistered. Don't unregister the subchannel, instead unregister
offline device.
* tag 's390-6.4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/purgatory: disable branch profiling
s390/cio: unregister device when the only path is gone
|
|
In the following:
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0xd9/0x150 lib/dump_stack.c:106
assign_lock_key kernel/locking/lockdep.c:982 [inline]
register_lock_class+0xdb6/0x1120 kernel/locking/lockdep.c:1295
__lock_acquire+0x10a/0x5df0 kernel/locking/lockdep.c:4951
lock_acquire kernel/locking/lockdep.c:5691 [inline]
lock_acquire+0x1b1/0x520 kernel/locking/lockdep.c:5656
__raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline]
_raw_spin_lock_irqsave+0x3d/0x60 kernel/locking/spinlock.c:162
skb_dequeue+0x20/0x180 net/core/skbuff.c:3639
drain_resp_pkts drivers/infiniband/sw/rxe/rxe_comp.c:555 [inline]
rxe_completer+0x250d/0x3cc0 drivers/infiniband/sw/rxe/rxe_comp.c:652
rxe_qp_do_cleanup+0x1be/0x820 drivers/infiniband/sw/rxe/rxe_qp.c:761
execute_in_process_context+0x3b/0x150 kernel/workqueue.c:3473
__rxe_cleanup+0x21e/0x370 drivers/infiniband/sw/rxe/rxe_pool.c:233
rxe_create_qp+0x3f6/0x5f0 drivers/infiniband/sw/rxe/rxe_verbs.c:583
This is a use-before-initialization problem.
It happens because rxe_qp_do_cleanup is called during error unwind before
the struct has been fully initialized.
Move the initialization of the skb earlier.
Fixes: 8700e3e7c485 ("Soft RoCE driver")
Link: https://lore.kernel.org/r/20230602035408.741534-1-yanjun.zhu@intel.com
Reported-by: syzbot+eba589d8f49c73d356da@syzkaller.appspotmail.com
Signed-off-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
"Two fixes for the GPIO testing module and one commit making Andy a
reviewer for the GPIO subsystem:
- fix a memory corruption bug in gpio-sim
- fix inconsistencies in user-space configuration of gpio-sim
- make Andy Shevchenko a reviewer for the GPIO subsystem"
* tag 'gpio-fixes-for-v6.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
MAINTAINERS: add Andy Shevchenko as reviewer for the GPIO subsystem
gpio: sim: quietly ignore configured lines outside the bank
gpio: sim: fix memory corruption when adding named lines and unnamed hogs
|
|
Use the right structs for PACKED or split vqs when setting and
getting the vring base.
Fixes: 4c8cf31885f6 ("vhost: introduce vDPA-based backend")
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Message-Id: <20230424225031.18947-4-shannon.nelson@amd.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
|
|
Use the right structs for PACKED or split vqs when setting and
getting the vring base.
Fixes: 4c8cf31885f6 ("vhost: introduce vDPA-based backend")
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Message-Id: <20230424225031.18947-3-shannon.nelson@amd.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control fix from Linus Walleij:
"A single fix for the Meson driver, nothing else has surfaced so far
this cycle"
* tag 'pinctrl-v6.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: meson-axg: add missing GPIOA_18 gpio group
|
|
HP Elite Presenter Mouse HID Record Descriptor shows
two mouses (Repord ID 0x1 and 0x2), one keypad (Report ID 0x5),
two Consumer Controls (Report IDs 0x6 and 0x3).
Previous to this commit it registers one mouse, one keypad
and one Consumer Control, and it was usable only as a
digitl laser pointer (one of the two mouses). This patch defines
the 464a USB device ID and enables the HID_QUIRK_MULTI_INPUT
quirk for it, allowing to use the device both as a mouse
and a digital laser pointer.
Signed-off-by: Marco Morandini <marco.morandini@polimi.it>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
Expose the 2017 SHIELD controller (Thunderstrike) LED through the kernel
LED API.
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
Map Android Home, Back, Search, VolumeUp, VolumeDown, and PlayPause buttons
to the appropriate input event codes.
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
Supports the Thunderstrike (SHIELD 2017) controller. Implements support for
the Thunderstrike HOSTCMD firmware interface. Adds sysfs attributes about a
SHIELD device and introduces haptics support for controllers.
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
On the Keychron K8 keyboard, and probably others, the right side keys
should not be swapped to maintain PC layout.
Swapping the right side keys moves 'Super' before 'Alt gr' which is not
intended by the default Keychron layout or the ISO layout.
Signed-off-by: Lasse Brun <bruners@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
While KUnit tests that cannot be built as a loadable module must depend
on "KUNIT=y", this is not true for modular tests, where it adds an
unnecessary limitation.
Fix this by relaxing the dependency to "KUNIT".
Fixes: 08809e482a1c44d9 ("HID: uclogic: KUnit best practices and naming conventions")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: José Expósito <jose.exposito89@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
The factory OTP, if supported, contains factory-programmed
information such as typically the serial number or production
week for the chip.
As this is device-unique information, submit it into the
system entropy pool.
This does not count as improvement of the entropy as such
but in practice it makes it a bit more random to mix in these
numbers.
Cc: Michael Walle <michael@walle.cc>
Acked-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20230606142931.3721374-1-linus.walleij@linaro.org
|
|
'tmp_list' is unused, so drop it.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/547248195d87d1240d6126d13eb1364b1a0b634d.1685853690.git.christophe.jaillet@wanadoo.fr
|
|
Some of the files in mtd/chips do not have a SPDX license
header, presumably because the text string "GPL'd" didn't
parse with Thomas rulesets for magic license tagging.
Fix this, the code is initially from RedHat which clearly
targeted the Linux kernel and intended it to be GPLv2.
In any case the original author appears to be David
Woodhouse who can then confirm this.
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20230603185200.3571174-1-linus.walleij@linaro.org
|
|
Meson NAND controller has limited buffer length, so check it before
command execution to avoid length trim. Also check MTD write size on
chip attach.
Signed-off-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20230609112840.2325455-1-AVKrasnov@sberdevices.ru
|
|
MX31LF2GE4BC and MX31UF2GE4BC are Macroninx SPI NAND flash
with 8-bit on-die ECC.
Validated via normal(default) and QUAD mode by read ,read back,
on Xilinx Zynq PicoZed FPGA which include Macronix
SPI Host(drivers/spi/spi-mxic.c)
Signed-off-by: JaimeLiao <jaimeliao.tw@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20230608052114.20454-1-jaimeliao.tw@gmail.com
|
|
If there is no wired ready/busy pin, classic way to wait for command
completion is to use function 'nand_soft_waitrdy()'. Meson NAND has
special command which allows to wait for NAND_STATUS_READY bit without
reading status in a software loop (as 'nand_soft_waitrdy()' does). To
use it send this command along with NAND_CMD_STATUS, then wait for an
interrupt, and after interrupt send NAND_CMD_READ0. So this feature
allows to use interrupt driven waiting without wired ready/busy pin.
Suggested-by: Liang Yang <liang.yang@amlogic.com>
Signed-off-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20230608044728.1328506-3-AVKrasnov@sberdevices.ru
|
|
Add defines for column address. It makes driver more readable, because
bitwise OR with 0 looks useless.
Suggested-by: Liang Yang <liang.yang@amlogic.com>
Signed-off-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20230608043644.1271186-1-AVKrasnov@sberdevices.ru
|
|
This reverts commit fc9e18f9e987ad46722dad53adab1c12148c213c.
This patch was a work around to fix timeout issue while operating in NVDDR
mode with software ECC engine. This patch prevents the Arasan NAND driver
from operating in NVDDR mode with software ECC engine resulting in a
significant performance degradation with SW-ECC.
'commit 7499bfeedb47 ("mtd: rawnand: arasan: Update NAND bus clock instead
of system clock")' and 'commit e16eceea863b ("mtd: rawnand: arasan: Fix
clock rate in NV-DDR")'
fixes the timeout issue in NVDDR mode with SW-ECC so, reverting the changes
as this work around is no longer required.
Signed-off-by: Amit Kumar Mahapatra <amit.kumar-mahapatra@amd.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20230607053936.14306-1-amit.kumar-mahapatra@amd.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux into i2c/for-current
at24 fixes for v6.4-rc6
- fix a Kconfig issue (we need to select REGMAP, not only REGMAP_I2C)
|
|
This driver fails to link when CRYPTO is disabled, or in a loadable
module:
WARNING: unmet direct dependencies detected for CRYPTO_GCM
WARNING: unmet direct dependencies detected for CRYPTO_AEAD2
Depends on [m]: CRYPTO [=m]
Selected by [y]:
- SEV_GUEST [=y] && VIRT_DRIVERS [=y] && AMD_MEM_ENCRYPT [=y]
x86_64-linux-ld: crypto/aead.o: in function `crypto_register_aeads':
Fixes: fce96cf04430 ("virt: Add SEV-SNP guest driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20230117171416.2715125-1-arnd@kernel.org
|
|
The rx_replenish_retry timer is initialized in ath12k_core_alloc() when ath12k
module is loaded. But rx_replenish_retry timer is not deleted anywhere in the
code. It is supposed to be deleted when ath12k module is removed/unloaded.
Delete the timer rx_replenish_retry in ath12k_core_free().
Found during code review.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0-02903-QCAHKSWPL_SILICONZ-1
Signed-off-by: Hari Chandrakanthan <quic_haric@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/1685355238-3282-1-git-send-email-quic_haric@quicinc.com
|
|
We are seeing a very low TCP throughput testing with some specific
tools. This is because for sub-frames of an AMSDU, MCBC flag in
mpdu_start may be not valid, and as a result those frames would be
dropped by kernel.
Add a new helper to get it from msdu_end. Also clean up original
helper since it is not needed any more.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4
Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230529081609.34567-1-quic_bqiang@quicinc.com
|
|
This is to check the hardware major version for WCN7850 so only
supported hardware is initialized. Now only WCN7850 with major
version 2 is supported.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4
Signed-off-by: Carl Huang <quic_cjhuang@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230518105741.1281424-1-quic_cjhuang@quicinc.com
|
|
Currently 'ar' reference is not added in skb_cb.
Though this is generally not used during transmit completion
callbacks, on interface removal the remaining idr cleanup callback
uses the ar pointer from skb_cb from management txmgmt_idr. Hence fill them
during transmit call for proper usage to avoid NULL pointer dereference.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1
Signed-off-by: Balamurugan S <quic_bselvara@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230518071046.14337-1-quic_bselvara@quicinc.com
|
|
User can extend test mode command support to set vdev and pdev params
for debug purpose at run time by sending vdev/pdev param set command
through the testmode command interface.
Fill the proper pdev/vdev id in driver since, pdev/vdev id details may
not be available at user space. It will make sure that the proper
vdev/pdev ids are sent to firmware.
Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1
Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1
Signed-off-by: Venkateswara Naralasetty <quic_vnaralas@quicinc.com>
Signed-off-by: Raj Kumar Bhagat <quic_rajkbhag@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230601143214.13006-1-quic_rajkbhag@quicinc.com
|
|
This introduces no changes in the compiled result (tested for an
ARCH=arm allmodconfig build).
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230601082556.2738446-5-u.kleine-koenig@pengutronix.de
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Both ath10k platform drivers return zero unconditionally in their remove
callback, so they can be trivially converted to use .remove_new().
Also fix on of the more offending whitespace issues in the definition
of ath10k_snoc_driver.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230601082556.2738446-4-u.kleine-koenig@pengutronix.de
|
|
platform_get_drvdata() cannot return NULL as the probe function calls
platform_set_drvdata() with a non-NULL argument or returns with a failure.
In the first case, platform_get_drvdata() returns this non-NULL value and
in the second the remove callback isn't called at all.
ath10k_ahb_priv() cannot return NULL and ar_ahb is unused after the check
anyhow.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230601082556.2738446-3-u.kleine-koenig@pengutronix.de
|
|
The driver core cares for resetting driver data if probe fails and after
remove. So drop the explicit and duplicate cleanup in the driver's
functions.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230601082556.2738446-2-u.kleine-koenig@pengutronix.de
|
|
Add ddr performance monitor support for i.MX93.
There are 11 counters for ddr performance events.
- Counter 0 is a 64-bit counter that counts only clock cycles.
- Counter 1-10 are 32-bit counters that can monitor counter-specific
events in addition to counting reference events.
For example:
perf stat -a -e imx9_ddr0/ddrc_pm_1,counter=1/,imx9_ddr0/ddrc_pm_2,counter=2/ ls
Besides, this ddr pmu support AXI filter capability. It's implemented as
counter-specific events. It now supports read transaction, write transaction
and read beat events which corresponding respecitively to counter 2, 3 and 4.
axi_mask and axi_id need to be as event parameters.
For example:
perf stat -a -I 1000 -e imx9_ddr0/eddrtq_pm_rd_trans_filt,counter=2,axi_mask=ID_MASK,axi_id=ID/
perf stat -a -I 1000 -e imx9_ddr0/eddrtq_pm_wr_trans_filt,counter=3,axi_mask=ID_MASK,axi_id=ID/
perf stat -a -I 1000 -e imx9_ddr0/eddrtq_pm_rd_beat_filt,counter=4,axi_mask=ID_MASK,axi_id=ID/
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20230418102910.2065651-1-xu.yang_2@nxp.com
[will: Remove redundant error message on platform_get_irq() failure]
Signed-off-by: Will Deacon <will@kernel.org>
|
|
The functional paths of the driver need not care about ACPI, so abstract
the property of atomic doubleword access as its own flag (repacking the
structure for a better fit). We also do not need to go poking directly
at the APMT for standard resources which the ACPI layer has already
dealt with, so deal with the optional MMIO page and interrupt in the
normal firmware-agnostic manner. The few remaining portions of probing
that *are* APMT-specific can still easily retrieve the APMT pointer as
needed without us having to carry a duplicate copy around everywhere.
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-and-tested-by: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Link: https://lore.kernel.org/r/88f97268603e1aa6016d178982a1dc2861f6770d.1685983270.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Build-wise, the ACPI dependency consists of only a couple of things
which could probably stand being factored out into ACPI helpers anyway.
However for the immediate concern of working towards Devicetree support
here, it's easy enough to make a few tweaks to contain the affected code
locally, such that we can relax the Kconfig dependency.
Reviewed-and-Tested-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Reviewed-by: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/9d126711c7498b199b3e6f5cf48ca60ffb9df54c.1685983270.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Don't register a resource for the second page unless the dual-page
extension flag is actually present to say it's valid.
CC: Lorenzo Pieralisi <lpieralisi@kernel.org>
CC: Sudeep Holla <sudeep.holla@arm.com>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Reviewed-by: Hanjun Guo <guohanjun@huawei.com>
Reviewed-and-tested-by: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Link: https://lore.kernel.org/r/63b34656e1f7b41bcb458fb6d7496e04db757e0d.1685983270.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
ARM_CSPMU_EVENT_ATTR() defines a struct perf_pmu_events_attr, so
arm_cspmu_sysfs_event_show() should not be interpreting it as struct
dev_ext_attribute.
Fixes: e37dfd65731d ("perf: arm_cspmu: Add support for ARM CoreSight PMU driver")
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Reviewed-and-tested-by: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/27c0804af64007b2400abbc40278f642ee6a0a29.1685983270.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Don't try to set irq affinity if PMU doesn't have an overflow interrupt.
Fixes: e37dfd65731d ("perf: arm_cspmu: Add support for ARM CoreSight PMU driver")
Signed-off-by: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Link: https://lore.kernel.org/r/20230608203742.3503486-1-ilkka@os.amperecomputing.com
Signed-off-by: Will Deacon <will@kernel.org>
|
