| Age | Commit message (Collapse) | Author |
|---|
|
Add spatial extension (spe) index as a configurable parameter in testmode.
This is used for specifically configuring TX path, such as different
WF TX priority, number of antennas and spatial streams.
If spe_idx is not set, TX path depends on tx_antenna_mask; otherwise,
both spe_idx and tx_antenna_mask are referenced to decide TX path.
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
LDPC should be set when bw is larger than 20MHz to make
testmode tx work normally.
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Move chainmask from driver phy to mt76_phy since it is used by all
drivers. This is a preliminary patch to create a common mcu library used
by mt7615 and mt7921 drivers
Co-developed-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Move mac_work delayed_work and mac_work_count in mt76_phy since it is
used by all drivers. This is a preliminary patch to create a common mcu
library used by mt7615 and mt7921 drivers
Co-developed-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Move per-chip testmode data to mt7615_phy, to properly support
reg_backup and rx status of each band in testmode.
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Acked-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Move per-chip testmode data to mt7915_phy, to properly support
reg_backup and rx status of each band in testmode.
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Acked-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Move testmode mtd variables to mt76_dev, since they are the same on
each phy.
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Acked-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Add testmode support for DBDC NICs (both MT7615D and MT7915D work).
Testmode data and parameters are moved from per-dev to per-phy
for maintaining the value of each band.
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Acked-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
This is a preliminary patch for DBDC and ipg config support
in testmode.
The wmm_idx of band1 should be configured by this command to
make band1 Tx work normally. Also, for setting ipg, FW needs a
non-empty bss_info structure to do edca parameters update.
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Acked-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Hardware wouldn't add LLC-SNAP when skb->data_len is 0, which causes
Tx hang, so add a check to drop this kind of packet.
Tested-by: Bo Jiao <bo.jiao@mediatek.com>
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Simplify mt7915_mcu_send_message routine removing unused code
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Fix the following sparse warning in mt7915_mcu_set_radar_th routine:
drivers/net/wireless/mediatek/mt76/mt7915/mcu.c:3154:17: warning: incorrect type in initializer (different base types)
drivers/net/wireless/mediatek/mt76/mt7915/mcu.c:3154:17: expected unsigned int [usertype] min_pri
drivers/net/wireless/mediatek/mt76/mt7915/mcu.c:3154:17: got restricted __le32 [usertype]
drivers/net/wireless/mediatek/mt76/mt7915/mcu.c:3155:17: warning: incorrect type in initializer (different base types)
drivers/net/wireless/mediatek/mt76/mt7915/mcu.c:3155:17: expected unsigned int [usertype] max_pri
drivers/net/wireless/mediatek/mt76/mt7915/mcu.c:3155:17: got restricted __le32 [usertype]
drivers/net/wireless/mediatek/mt76/mt7915/mcu.c:3162:17: warning: incorrect type in initializer (different base types)
drivers/net/wireless/mediatek/mt76/mt7915/mcu.c:3162:17: expected unsigned int [usertype] min_stgpr_diff
drivers/net/wireless/mediatek/mt76/mt7915/mcu.c:3162:17: got restricted __le32 [usertype]
Fixes: cee236e1489ec ("mt76: mt7915: fix endian issues")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Add support for getting rf values from flash.
This is used for some test purposes and products.
If the mtd partition is configured in dts, driver will read from flash
to init eeprom command; if not, still init it with efuse's values.
An example:
&slot0 {
mt7915@0,0 {
reg = <0x0000 0 0 0 0>;
device_type = "pci";
mediatek,mtd-eeprom = <&factory 0x0000>;
};
};
Acked-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
In order to avoid races, run mt7915_configure_filter routine holding
mt76 mutex
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Replace a comma between expression statements by a semicolon.
Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Replace a comma between expression statements by a semicolon.
Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Reset token in mt7615_mac_reset_work() to avoid possible leakege.
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Reset buffering token in mt7915_mac_reset_work() to avoid possible leakege,
which leads to Tx stop after mac reset.
Tested-by: Bo Jiao <bo.jiao@mediatek.com>
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
MCU expects to set WLAN_CIPHER_SUITE_CCMP and WLAN_CIPHER_SUITE_AES_CMAC
at the same time, so adding an intermediate buffer for batch update.
Tested-by: Sujuan Chen <sujuan.chen@mediatek.com>
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
This avoids the WARN_ON(1) calltrace in station mode.
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
To avoid the warn_on() calltrace in station mode.
[ 4522.024382] ieee80211_tx_dequeue+0x1258/0x1298 [mac80211]
[ 4522.029868] ieee80211_beacon_get_template+0x10/0x18 [mac80211]
[ 4522.035780] mt7915_mcu_add_beacon+0x2c/0x208 [mt7915e]
[ 4522.040997] mt7915_mcu_get_rx_rate+0x304/0x878 [mt7915e]
[ 4522.046394] ieee80211_delayed_tailroom_dec+0x158/0x180 [mac80211]
[ 4522.052573] ieee80211_iterate_interfaces+0x48/0x68 [mac80211]
[ 4522.058398] mt7915_mac_reset_work+0x3b4/0x630 [mt7915e]
[ 4522.063704] process_one_work+0x1fc/0x390
[ 4522.067703] worker_thread+0x48/0x4d0
[ 4522.071356] kthread+0x120/0x128
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"One new device ID here, plus an error handling fix - nothing
remarkable in either"
* tag 'spi-fix-v5.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spidev: Add cisco device compatible
spi: altera: Fix memory leak on error path
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fixes from Mark Brown:
"The main thing here is a change to make sure that we don't try to
double resolve the supply of a regulator if we have two probes going
on simultaneously, plus an incremental fix on top of that to resolve a
lockdep issue it introduced.
There's also a patch from Dmitry Osipenko adding stubs for some
functions to avoid build issues in consumers in some configurations"
* tag 'regulator-fix-v5.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: Fix lockdep warning resolving supplies
regulator: consumer: Add missing stubs to regulator/consumer.h
regulator: core: avoid regulator_resolve_supply() race condition
|
|
This change simplifies the VF initialization check and also minimizes
the delay between acquiring the VSI pointer and using it. As known by
the commit being fixed, there is a risk of the VSI pointer getting
changed. Therefore minimize the delay between getting and using the
pointer.
Fixes: 9889707b06ac ("i40e: Fix crash caused by stress setting of VF MAC addresses")
Signed-off-by: Stefan Assmann <sassmann@kpanic.de>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
The current MSI-X enablement logic tries to enable best-case MSI-X
vectors and if that fails we only support a bare-minimum set. This
includes a single MSI-X for 1 Tx and 1 Rx queue and a single MSI-X
for the OICR interrupt. Unfortunately, the driver fails to load when we
don't get as many MSI-X as requested for a couple reasons.
First, the code to allocate MSI-X in the driver tries to allocate
num_online_cpus() MSI-X for LAN traffic without caring about the number
of MSI-X actually enabled/requested from the kernel for LAN traffic.
So, when calling ice_get_res() for the PF VSI, it returns failure
because the number of available vectors is less than requested. Fix
this by not allowing the PF VSI to allocation more than
pf->num_lan_msix MSI-X vectors and pf->num_lan_msix Rx/Tx queues.
Limiting the number of queues is done because we don't want more than
1 Tx/Rx queue per interrupt due to performance conerns.
Second, the driver assigns pf->num_lan_msix = 2, to account for LAN
traffic and the OICR. However, pf->num_lan_msix is only meant for LAN
MSI-X. This is causing a failure when the PF VSI tries to
allocate/reserve the minimum pf->num_lan_msix because the OICR MSI-X has
already been reserved, so there may not be enough MSI-X vectors left.
Fix this by setting pf->num_lan_msix = 1 for the failure case. Then the
ICE_MIN_MSIX accounts for the LAN MSI-X and the OICR MSI-X needed for
the failure case.
Update the related defines used in ice_ena_msix_range() to align with
the above behavior and remove the unused RDMA defines because RDMA is
currently not supported. Also, remove the now incorrect comment.
Fixes: 152b978a1f90 ("ice: Rework ice_ena_msix_range")
Signed-off-by: Brett Creeley <brett.creeley@intel.com>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Currently users could create more channels than LAN MSI-X available.
This is happening because there is no check against pf->num_lan_msix
when checking the max allowed channels and will cause performance issues
if multiple Tx and Rx queues are tied to a single MSI-X. Fix this by not
allowing more channels than LAN MSI-X available in pf->num_lan_msix.
Fixes: 87324e747fde ("ice: Implement ethtool ops for channels")
Signed-off-by: Brett Creeley <brett.creeley@intel.com>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Fix the driver to copy the MAC address configured in ndo_set_mac_address
into dev_addr, even if the MAC filter already exists in HW. In some
situations (e.g. bonding) the netdev's dev_addr could have been modified
outside of the driver, with no change to the HW filter, so the driver
cannot assume that they match.
Fixes: 757976ab16be ("ice: Fix check for removing/adding mac filters")
Signed-off-by: Nick Nunley <nicholas.d.nunley@intel.com>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
This patch is based on a similar change to i40e by Slawomir Laba:
"i40e: Implement flow for IPv6 next header (extension header)".
When a packet contains an IPv6 header with next header which is
an extension header and not a protocol one, the kernel function
skb_transport_header called with such sk_buff will return a
pointer to the extension header and not to the TCP one.
The above explained call caused a problem with packet processing
for skb with encapsulation for tunnel with ICE_TX_CTX_EIPT_IPV6.
The extension header was not skipped at all.
The ipv6_skip_exthdr function does check if next header of the IPV6
header is an extension header and doesn't modify the l4_proto pointer
if it points to a protocol header value so its safe to omit the
comparison of exthdr and l4.hdr pointers. The ipv6_skip_exthdr can
return value -1. This means that the skipping process failed
and there is something wrong with the packet so it will be dropped.
Fixes: a4e82a81f573 ("ice: Add support for tunnel offloads")
Signed-off-by: Nick Nunley <nicholas.d.nunley@intel.com>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
The packet classifier would occasionally misrecognize an IPv6 training
packet when the next protocol field was 0. The correct value for
unspecified protocol is IPPROTO_NONE.
Fixes: 165d80d6adab ("ice: Support IPv6 Flow Director filters")
Signed-off-by: Henry Tieman <henry.w.tieman@intel.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Replace "ret" variable by "irq" variable from platform_get_irq condition
handling in stm32_init_port as suggested by Jiri in "STM32 uart cleanup and
improvement" series review.
This change will prevent port->irq to be unexpectly modified by a potential
change of "ret" value introduced by a new patch.
Suggested-by: Jiri Slaby <jirislaby@kernel.org>
Signed-off-by: Erwan Le Ray <erwan.leray@foss.st.com>
Link: https://lore.kernel.org/r/20210121142309.6327-1-erwan.leray@foss.st.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Intel Moorestown and Medfield are quite old Intel Atom based
32-bit platforms, which were in limited use in some Android phones,
tablets and consumer electronics more than eight years ago.
There are no bugs or problems ever reported outside from Intel
for breaking any of that platforms for years. It seems no real
users exists who run more or less fresh kernel on it. The commit
05f4434bc130 ("ASoC: Intel: remove mfld_machine") also in align
with this theory.
Due to above and to reduce a burden of supporting outdated drivers
we remove the support of outdated platforms completely.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20210125150238.16980-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
raw_fmt->height in never initialized. But width in initialized twice.
Fixes: 88d06362d1d05 ("media: hantro: Refactor for V4L2 API spec compliancy")
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Cc: <stable@vger.kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Missing stm32 directory to Makefile.
Signed-off-by: Yannick Fertre <yannick.fertre@foss.st.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Fixes: 4be5e8648b0c ("media: move CEC platform drivers to a separate directory")
Cc: <stable@vger.kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
During H264 API overhaul subtle bug was introduced Cedrus driver.
Progressive references have both, top and bottom reference flags set.
Cedrus reference list expects only bottom reference flag and only when
interlaced frames are decoded. However, due to a bug in Cedrus check,
exclusivity is not tested and that flag is set also for progressive
references. That causes "jumpy" background with many videos.
Fix that by checking that only bottom reference flag is set in control
and nothing else.
Tested-by: Andre Heider <a.heider@gmail.com>
Fixes: cfc8c3ed533e ("media: cedrus: h264: Properly configure reference field")
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Cc: <stable@vger.kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
In 'dma_pool_create()', we return -ENOMEM, but don't release the resources
already allocated, as in all the other error handling paths.
Go to 'err_res_free' instead of returning directly.
Fixes: 017794739702 ("dmaengine: ti: k3-udma: Initial support for K3 BCDMA")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Link: https://lore.kernel.org/r/20210124070923.724479-1-christophe.jaillet@wanadoo.fr
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
memcpy operation is next to memset code, and the size to copy is equals to the size to
memset, so the memset operation is unnecessary, remove it.
Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20201223012516.24286-1-zhengyongjun3@huawei.com
|
|
When function return fail to __ath11k_mac_register after success called
ieee80211_register_hw, then it set wiphy->dev.parent to NULL by
SET_IEEE80211_DEV(ar->hw, NULL) in end of __ath11k_mac_register, then
cfg80211_get_drvinfo will be called by below call stack, but the
wiphy->dev.parent is NULL, so kernel crash.
Call stack to cfg80211_get_drvinfo:
NetworkManager 826 [001] 6696.731371: probe:cfg80211_get_drvinfo: (ffffffffc107d8f0)
ffffffffc107d8f1 cfg80211_get_drvinfo+0x1 (/lib/modules/5.10.0-rc1-wt-ath+/kernel/net/wireless-back/cfg80211.ko)
ffffffff9d8fc529 ethtool_get_drvinfo+0x99 (vmlinux)
ffffffff9d90080e dev_ethtool+0x1dbe (vmlinux)
ffffffff9d8b88f7 dev_ioctl+0xb7 (vmlinux)
ffffffff9d8668de sock_do_ioctl+0xae (vmlinux)
ffffffff9d866d60 sock_ioctl+0x350 (vmlinux)
ffffffff9d2ca30e __x64_sys_ioctl+0x8e (vmlinux)
ffffffff9da0dda3 do_syscall_64+0x33 (vmlinux)
ffffffff9dc0008c entry_SYSCALL_64_after_hwframe+0x44 (vmlinux)
7feb5f673007 __GI___ioctl+0x7 (/lib/x86_64-linux-gnu/libc-2.23.so)
0 [unknown] ([unknown])
Code of cfg80211_get_drvinfo, the pdev which is wiphy->dev.parent is
NULL when kernel crash:
void cfg80211_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info)
{
struct wireless_dev *wdev = dev->ieee80211_ptr;
struct device *pdev = wiphy_dev(wdev->wiphy);
if (pdev->driver)
....
kernel crash log:
[ 973.619550] ath11k_pci 0000:05:00.0: failed to perform regd update : -16
[ 973.619555] ath11k_pci 0000:05:00.0: ath11k regd update failed: -16
[ 973.619566] ath11k_pci 0000:05:00.0: failed register the radio with mac80211: -16
[ 973.619618] ath11k_pci 0000:05:00.0: failed to create pdev core: -16
[ 973.636035] BUG: kernel NULL pointer dereference, address: 0000000000000068
[ 973.636046] #PF: supervisor read access in kernel mode
[ 973.636050] #PF: error_code(0x0000) - not-present page
[ 973.636054] PGD 800000012452e067 P4D 800000012452e067 PUD 12452d067 PMD 0
[ 973.636064] Oops: 0000 [#1] SMP PTI
[ 973.636072] CPU: 3 PID: 848 Comm: NetworkManager Kdump: loaded Tainted: G W OE 5.10.0-rc1-wt-ath+ #24
[ 973.636076] Hardware name: LENOVO 418065C/418065C, BIOS 83ET63WW (1.33 ) 07/29/2011
[ 973.636161] RIP: 0010:cfg80211_get_drvinfo+0x25/0xd0 [cfg80211]
[ 973.636169] Code: e9 c9 fe ff ff 66 66 66 66 90 55 53 ba 20 00 00 00 48 8b af 08 03 00 00 48 89 f3 48 8d 7e 04 48 8b 45 00 48 8b 80 90 01 00 00 <48> 8b 40 68 48 85 c0 0f 84 8d 00 00 00 48 8b 30 e8 a6 cc 72 c7 48
[ 973.636174] RSP: 0018:ffffaafb4040bbe0 EFLAGS: 00010286
[ 973.636180] RAX: 0000000000000000 RBX: ffffaafb4040bbfc RCX: 0000000000000000
[ 973.636184] RDX: 0000000000000020 RSI: ffffaafb4040bbfc RDI: ffffaafb4040bc00
[ 973.636188] RBP: ffff8a84c9568950 R08: 722d302e30312e35 R09: 74612d74772d3163
[ 973.636192] R10: 3163722d302e3031 R11: 2b6874612d74772d R12: ffffaafb4040bbfc
[ 973.636196] R13: 00007ffe453707c0 R14: ffff8a84c9568000 R15: 0000000000000000
[ 973.636202] FS: 00007fd3d179b940(0000) GS:ffff8a84fa2c0000(0000) knlGS:0000000000000000
[ 973.636206] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 973.636211] CR2: 0000000000000068 CR3: 00000001153b6002 CR4: 00000000000606e0
[ 973.636215] Call Trace:
[ 973.636234] ethtool_get_drvinfo+0x99/0x1f0
[ 973.636246] dev_ethtool+0x1dbe/0x2be0
[ 973.636256] ? mntput_no_expire+0x35/0x220
[ 973.636264] ? inet_ioctl+0x1ce/0x200
[ 973.636274] ? tomoyo_path_number_perm+0x68/0x1d0
[ 973.636282] ? kmem_cache_alloc+0x3cb/0x430
[ 973.636290] ? dev_ioctl+0xb7/0x570
[ 973.636295] dev_ioctl+0xb7/0x570
[ 973.636307] sock_do_ioctl+0xae/0x150
[ 973.636315] ? sock_ioctl+0x350/0x3c0
[ 973.636319] sock_ioctl+0x350/0x3c0
[ 973.636332] ? __x64_sys_ioctl+0x8e/0xd0
[ 973.636339] ? dlci_ioctl_set+0x30/0x30
[ 973.636346] __x64_sys_ioctl+0x8e/0xd0
[ 973.636359] do_syscall_64+0x33/0x80
[ 973.636368] entry_SYSCALL_64_after_hwframe+0x44/0xa9
Sequence of function call when wlan load for success case when function
__ath11k_mac_register return 0:
kworker/u16:3-e 2922 [001] 6696.729734: probe:ieee80211_register_hw: (ffffffffc116ae60)
kworker/u16:3-e 2922 [001] 6696.730210: probe:ieee80211_if_add: (ffffffffc1185cc0)
NetworkManager 826 [001] 6696.731345: probe:ethtool_get_drvinfo: (ffffffff9d8fc490)
NetworkManager 826 [001] 6696.731371: probe:cfg80211_get_drvinfo: (ffffffffc107d8f0)
NetworkManager 826 [001] 6696.731639: probe:ethtool_get_drvinfo: (ffffffff9d8fc490)
NetworkManager 826 [001] 6696.731653: probe:cfg80211_get_drvinfo: (ffffffffc107d8f0)
NetworkManager 826 [001] 6696.732866: probe:ethtool_get_drvinfo: (ffffffff9d8fc490)
NetworkManager 826 [001] 6696.732893: probe:cfg80211_get_drvinfo: (ffffffffc107d8f0)
systemd-udevd 3850 [003] 6696.737199: probe:ethtool_get_drvinfo: (ffffffff9d8fc490)
systemd-udevd 3850 [003] 6696.737226: probe:cfg80211_get_drvinfo: (ffffffffc107d8f0)
NetworkManager 826 [000] 6696.759950: probe:ethtool_get_drvinfo: (ffffffff9d8fc490)
NetworkManager 826 [000] 6696.759967: probe:cfg80211_get_drvinfo: (ffffffffc107d8f0)
NetworkManager 826 [000] 6696.760057: probe:ethtool_get_drvinfo: (ffffffff9d8fc490)
NetworkManager 826 [000] 6696.760062: probe:cfg80211_get_drvinfo: (ffffffffc107d8f0)
After apply this patch, kernel crash gone, and below is the test case's
sequence of function call and log when wlan load with fail by function
ath11k_regd_update, and __ath11k_mac_register return fail:
kworker/u16:5-e 192 [001] 215.174388: probe:ieee80211_register_hw: (ffffffffc1131e60)
kworker/u16:5-e 192 [000] 215.174973: probe:ieee80211_if_add: (ffffffffc114ccc0)
NetworkManager 846 [001] 215.175857: probe:ethtool_get_drvinfo: (ffffffff928fc490)
kworker/u16:5-e 192 [000] 215.175867: probe:ieee80211_unregister_hw: (ffffffffc1131970)
NetworkManager 846 [001] 215.175880: probe:cfg80211_get_drvinfo: (ffffffffc107f8f0)
NetworkManager 846 [001] 215.176105: probe:ethtool_get_drvinfo: (ffffffff928fc490)
NetworkManager 846 [001] 215.176118: probe:cfg80211_get_drvinfo: (ffffffffc107f8f0)
[ 215.175859] ath11k_pci 0000:05:00.0: ath11k regd update failed: -16
NetworkManager 846 [001] 215.196420: probe:ethtool_get_drvinfo: (ffffffff928fc490)
NetworkManager 846 [001] 215.196430: probe:cfg80211_get_drvinfo: (ffffffffc107f8f0)
[ 215.258598] ath11k_pci 0000:05:00.0: failed register the radio with mac80211: -16
[ 215.258613] ath11k_pci 0000:05:00.0: failed to create pdev core: -16
When ath11k_regd_update or ath11k_debugfs_register return fail, function
ieee80211_unregister_hw of mac80211 will be called, then it will wait
untill cfg80211_get_drvinfo finished, the wiphy->dev.parent is not NULL
at this moment, after that, it set wiphy->dev.parent to NULL by
SET_IEEE80211_DEV(ar->hw, NULL) in end of __ath11k_mac_register, so
not happen kernel crash.
Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1
Signed-off-by: Wen Gong <wgong@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1608607824-16067-1-git-send-email-wgong@codeaurora.org
|
|
xhci-mtk needs XHCI_MTK_HOST quirk functions in add_endpoint() and
drop_endpoint() to handle its own sw bandwidth management.
It stores bandwidth data into an internal table every time
add_endpoint() is called, and drops those in drop_endpoint().
But when bandwidth allocation fails at one endpoint, all earlier
allocation from the same interface could still remain at the table.
This patch moves bandwidth management codes to check_bandwidth() and
reset_bandwidth() path. To do so, this patch also adds those functions
to xhci_driver_overrides and lets mtk-xhci to release all failed
endpoints in reset_bandwidth() path.
Fixes: 08e469de87a2 ("usb: xhci-mtk: supports bandwidth scheduling with multi-TT")
Signed-off-by: Ikjoon Jang <ikjn@chromium.org>
Link: https://lore.kernel.org/r/20210113180444.v6.1.Id0d31b5f3ddf5e734d2ab11161ac5821921b1e1e@changeid
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Breaking out of for_each_child_of_node requires a put on the
child value.
Generated by: scripts/coccinelle/iterators/for_each_child.cocci
Fixes: 82c2d81361ec ("coccinelle: iterators: Add for_each_child.cocci script")
CC: Sumera Priyadarsini <sylphrenadin@gmail.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: kernel test robot <lkp@intel.com>
Signed-off-by: Julia Lawall <julia.lawall@inria.fr>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/alpine.DEB.2.22.394.2101211907060.14700@hadrien
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Some devices, such as the Winbond Electronics Corp. Virtual Com Port
(Vendor=0416, ProdId=5011), lockup when usb_set_interface() or
usb_clear_halt() are called. This device has only a single
altsetting, so it should not be necessary to call usb_set_interface().
Acked-by: Pete Zaitcev <zaitcev@redhat.com>
Signed-off-by: Jeremy Figgins <kernel@jeremyfiggins.com>
Link: https://lore.kernel.org/r/YAy9kJhM/rG8EQXC@watson
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Since writing to address 0 is a very common mistake, let's try to avoid
putting anything sensitive there.
References: https://gitlab.freedesktop.org/drm/intel/-/issues/2989
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210125125033.23656-1-chris@chris-wilson.co.uk
Cc: stable@vger.kernel.org
(cherry picked from commit 56b429cc584c6ed8b895d8d8540959655db1ff73)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
The first thing the active retirement worker does is decrement the
i915_active count.
The first thing we do during i915_active_wait is try to increment the
i915_active count, but only if already active [non-zero].
The wait may see that the retirement is already started and so marked the
i915_active as idle, and skip waiting for the retirement handler.
However, the caller of i915_active_wait may immediately free the
i915_active upon returning (e.g. i915_vma_destroy) so we must not return
before the concurrent access from the worker is completed. We must
always flush the worker.
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/2473
Fixes: 274cbf20fd10 ("drm/i915: Push the i915_active.retire into a worker")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: <stable@vger.kernel.org> # v5.5+
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210121232807.16618-1-chris@chris-wilson.co.uk
(cherry picked from commit 977a372e972cb42799746c284035a33c64ebace9)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Object out is not released on path that no VMA instance found. The root
cause is jumping to an unexpected label on the error path.
Fixes: a47e788c2310 ("drm/i915/selftests: Exercise CS TLB invalidation")
Signed-off-by: Pan Bian <bianpan2016@163.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20210122015640.16002-1-bianpan2016@163.com
(cherry picked from commit 2b015017d5cb01477a79ca184ac25c247d664568)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Current code is checking only 2 bits in the subplatform, but actually 3
bits are allocated for the field. Check all 3 bits.
Fixes: 805446c8347c ("drm/i915: Introduce concept of a sub-platform")
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20210121161936.746591-1-tvrtko.ursulin@linux.intel.com
(cherry picked from commit 27b695ee1af9bb36605e67055874ec081306ac28)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
The MH PHY vswing table does have all the entries these days. Get
rid of the old hacks in the code which claim otherwise.
This hack was totally bogus anyway. The correct way to handle the
lack of those two entries would have been to declare our max
vswing and pre-emph to both be level 2.
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Clinton Taylor <clinton.a.taylor@intel.com>
Fixes: 9f7ffa297978 ("drm/i915/tc/icl: Update TC vswing tables")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201207203512.1718-1-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
(cherry picked from commit 5ec346476e795089b7dac8ab9dcee30c8d80ad84)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Since we do a bare context switch with no restore, the clear residual
kernel runs on dirty state, and we must be careful to avoid executing
with bad state from context registers inherited from a malicious client.
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/2955
Fixes: 09aa9e45863e ("drm/i915/gt: Restore clear-residual mitigations for Ivybridge, Baytrail")
Testcase: igt/gem_ctx_isolation # ivb,vlv
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Akeem G Abodunrin <akeem.g.abodunrin@intel.com>
Reviewed-by: Akeem G Abodunrin <akeem.g.abodunrin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210117093015.29143-1-chris@chris-wilson.co.uk
(cherry picked from commit ace44e13e577c2ae59980e9a6ff5ca253b1cf831)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
This code ends up calling wiphy_apply_custom_regulatory(), for which
we document that it should be called before wiphy_register(). This
driver doesn't do that, but calls it from ndo_open() with the RTNL
held, which caused deadlocks.
Since the driver just registers static regdomain data and then the
notifier applies the channel changes if any, there's no reason for
it to call this in ndo_open(), move it earlier to fix the deadlock.
Reported-and-tested-by: Hans de Goede <hdegoede@redhat.com>
Fixes: 51d62f2f2c50 ("cfg80211: Save the regulatory domain with a lock")
Link: https://lore.kernel.org/r/20210126115409.d5fd6f8fe042.Ib5823a6feb2e2aa01ca1a565d2505367f38ad246@changeid
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Currently, _everything_ in cfg80211 holds the RTNL, and if you
have a slow USB device (or a few) you can get some bad lock
contention on that.
Fix that by re-adding a mutex to each wiphy/rdev as we had at
some point, so we have locking for the wireless_dev lists and
all the other things in there, and also so that drivers still
don't have to worry too much about it (they still won't get
parallel calls for a single device).
Then, we can restrict the RTNL to a few cases where we add or
remove interfaces and really need the added protection. Some
of the global list management still also uses the RTNL, since
we need to have it anyway for netdev management, but we only
hold the RTNL for very short periods of time here.
Link: https://lore.kernel.org/r/20210122161942.81df9f5e047a.I4a8e1a60b18863ea8c5e6d3a0faeafb2d45b2f40@changeid
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> [marvell driver issues]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The recent commit to fix a memory leak introduced an inadvertant NULL
pointer dereference. The `wacom_wac->pen_fifo` variable was never
intialized, resuling in a crash whenever functions tried to use it.
Since the FIFO is only used by AES pens (to buffer events from pen
proximity until the hardware reports the pen serial number) this would
have been easily overlooked without testing an AES device.
This patch converts `wacom_wac->pen_fifo` over to a pointer (since the
call to `devres_alloc` allocates memory for us) and ensures that we assign
it to point to the allocated and initalized `pen_fifo` before the function
returns.
Link: https://github.com/linuxwacom/input-wacom/issues/230
Fixes: 37309f47e2f5 ("HID: wacom: Fix memory leakage caused by kfifo_alloc")
CC: stable@vger.kernel.org # v4.19+
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Tested-by: Ping Cheng <ping.cheng@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
Add SPDX-License-Identifier.
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
[nicolas.ferre@microhcip.com: remove license boilerplate now it's useless]
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/1611653376-24168-2-git-send-email-claudiu.beznea@microchip.com
|
