summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2021-01-21ethernet: ucc_geth: remove bd_mem_part and all associated codeRasmus Villemoes
The bd_mem_part member of ucc_geth_info always has the value MEM_PART_SYSTEM, and AFAICT, there has never been any code setting it to any other value. Moreover, muram is a somewhat precious resource, so there's no point using that when normal memory serves just as well. Apart from removing a lot of dead code, this is also motivated by wanting to clean up the "store result from kmalloc() in a u32" mess. Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-21ethernet: ucc_geth: use UCC_GETH_{RX,TX}_BD_RING_ALIGNMENT macros directlyRasmus Villemoes
These macros both have the value 32, there's no point first initializing align to a lower value. If anything, one could throw in a BUILD_BUG_ON(UCC_GETH_TX_BD_RING_ALIGNMENT < 4), but it's not worth it - lots of code depends on named constants having sensible values. Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-21ethernet: ucc_geth: don't statically allocate eight ucc_geth_infoRasmus Villemoes
struct ucc_geth_info is somewhat large, and on systems with only one or two UCC instances, that just wastes a few KB of memory. So allocate and populate a chunk of memory at probe time instead of initializing them all during driver init. Note that the existing "ug_info == NULL" check was dead code, as the address of some static array element can obviously never be NULL. Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-21ethernet: ucc_geth: constify ugeth_primary_infoRasmus Villemoes
Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-21ethernet: ucc_geth: factor out parsing of {rx,tx}-clock{,-name} propertiesRasmus Villemoes
Reduce the code duplication a bit by moving the parsing of rx-clock-name and the fallback handling to a helper function. Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-21ethernet: ucc_geth: remove {rx,tx}_glbl_pram_offset from struct ucc_geth_privateRasmus Villemoes
These fields are only used within ucc_geth_startup(), so they might as well be local variables in that function rather than being stashed in struct ucc_geth_private. Aside from making that struct a tiny bit smaller, it also shortens some lines (getting rid of pointless casts while here), and fixes the problems with using IS_ERR_VALUE() on a u32 as explained in commit 800cd6fb76f0 ("soc: fsl: qe: change return type of cpm_muram_alloc() to s32"). Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-21ethernet: ucc_geth: replace kmalloc+memset by kzallocRasmus Villemoes
Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-21ethernet: ucc_geth: remove unnecessary memset_io() callsRasmus Villemoes
These buffers have all just been handed out from qe_muram_alloc(), aka cpm_muram_alloc(), and the helper cpm_muram_alloc_common() already does memset_io(cpm_muram_addr(start), 0, size); Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-21ethernet: ucc_geth: use qe_muram_free_addr()Rasmus Villemoes
This removes the explicit NULL checks, and allows us to stop storing at least some of the _offset values separately. Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-21soc: fsl: qe: add cpm_muram_free_addr() helperRasmus Villemoes
Add a helper that takes a virtual address rather than the muram offset. This will be used in a couple of places to avoid having to store both the offset and the virtual address, as well as removing NULL checks from the callers. Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Acked-by: Li Yang <leoyang.li@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-21soc: fsl: qe: store muram_vbase as a void pointer instead of u8Rasmus Villemoes
The two functions cpm_muram_offset() and cpm_muram_dma() both need a cast currently, one casts muram_vbase to do the pointer arithmetic on void pointers, the other casts the passed-in address u8*. It's simpler and more consistent to just always use void* and drop all the casting. Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Acked-by: Li Yang <leoyang.li@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-21soc: fsl: qe: make cpm_muram_offset take a const void* argumentRasmus Villemoes
Allow passing const-qualified pointers without requiring a cast in the caller. Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Acked-by: Li Yang <leoyang.li@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-21ethernet: ucc_geth: remove unused read of temoder fieldRasmus Villemoes
In theory, such a read-after-write might be required by the hardware, but nothing in the data sheet suggests that to be the case. The name test also suggests that it's some debug leftover. Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-21dm: avoid filesystem lookup in dm_get_dev_t()Hannes Reinecke
This reverts commit 644bda6f3460 ("dm table: fall back to getting device using name_to_dev_t()") dm_get_dev_t() is just used to convert an arbitrary 'path' string into a dev_t. It doesn't presume that the device is present; that check will be done later, as the only caller is dm_get_device(), which does a dm_get_table_device() later on, which will properly open the device. So if the path string already _is_ in major:minor representation we can convert it directly, avoiding a recursion into the filesystem to lookup the block device. This avoids a hang in multipath_message() when the filesystem is inaccessible. Fixes: 644bda6f3460 ("dm table: fall back to getting device using name_to_dev_t()") Cc: stable@vger.kernel.org Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Martin Wilck <mwilck@suse.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2021-01-21dm crypt: fix copy and paste bug in crypt_alloc_req_aeadIgnat Korchagin
In commit d68b29584c25 ("dm crypt: use GFP_ATOMIC when allocating crypto requests from softirq") code was incorrectly copy and pasted from crypt_alloc_req_skcipher()'s crypto request allocation code to crypt_alloc_req_aead(). It is OK from runtime perspective as both simple encryption request pointer and AEAD request pointer are part of a union, but may confuse code reviewers. Fixes: d68b29584c25 ("dm crypt: use GFP_ATOMIC when allocating crypto requests from softirq") Cc: stable@vger.kernel.org # v5.9+ Reported-by: Pavel Machek <pavel@denx.de> Signed-off-by: Ignat Korchagin <ignat@cloudflare.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2021-01-21dm integrity: conditionally disable "recalculate" featureMikulas Patocka
Otherwise a malicious user could (ab)use the "recalculate" feature that makes dm-integrity calculate the checksums in the background while the device is already usable. When the system restarts before all checksums have been calculated, the calculation continues where it was interrupted even if the recalculate feature is not requested the next time the dm device is set up. Disable recalculating if we use internal_hash or journal_hash with a key (e.g. HMAC) and we don't have the "legacy_recalculate" flag. This may break activation of a volume, created by an older kernel, that is not yet fully recalculated -- if this happens, the user should add the "legacy_recalculate" flag to constructor parameters. Cc: stable@vger.kernel.org Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Reported-by: Daniel Glockner <dg@emlix.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2021-01-21octeontx2-af: Add devlink health reporters for NIXGeorge Cherian
Add health reporters for RVU NIX block. NIX Health reporters handle following HW event groups - GENERAL events - ERROR events - RAS events - RVU event Output: # devlink health pci/0002:01:00.0: reporter hw_npa_intr state healthy error 0 recover 0 grace_period 0 auto_recover true auto_dump true reporter hw_npa_gen state healthy error 0 recover 0 grace_period 0 auto_recover true auto_dump true reporter hw_npa_err state healthy error 0 recover 0 grace_period 0 auto_recover true auto_dump true reporter hw_npa_ras state healthy error 0 recover 0 grace_period 0 auto_recover true auto_dump true reporter hw_nix_intr state healthy error 0 recover 0 grace_period 0 auto_recover true auto_dump true reporter hw_nix_gen state healthy error 0 recover 0 grace_period 0 auto_recover true auto_dump true reporter hw_nix_err state healthy error 0 recover 0 grace_period 0 auto_recover true auto_dump true reporter hw_nix_ras state healthy error 0 recover 0 grace_period 0 auto_recover true auto_dump true # devlink health dump show pci/0002:01:00.0 reporter hw_nix_intr NIX_AF_RVU: NIX RVU Interrupt Reg : 1 Unmap Slot Error # devlink health dump show pci/0002:01:00.0 reporter hw_nix_gen NIX_AF_GENERAL: NIX General Interrupt Reg : 1 Rx multicast pkt drop Each reporter dump shows the Register value and the description of the cause. Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com> Signed-off-by: Jerin Jacob <jerinj@marvell.com> Signed-off-by: George Cherian <george.cherian@marvell.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-21dm integrity: fix a crash if "recalculate" used without "internal_hash"Mikulas Patocka
Recalculate can only be specified with internal_hash. Cc: stable@vger.kernel.org # v4.19+ Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2021-01-21Merge tag 'acpi-5.11-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI fix from Rafael Wysocki: "Modify a helper function in the ACPI core to match the behavior expected by its users so as to prevent NULL pointer dereferences and occasional memory corruption from occurring (Hans de Goede)" * tag 'acpi-5.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI: scan: Make acpi_bus_get_device() clear return pointer on error
2021-01-21Merge tag 'gpio-fixes-for-v5.11-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux Pull gpio fixes from Bartosz Golaszewski: - rework the character device code to avoid a frame size warning - fix printk format issues in gpio-tools - warn on redefinition of the to_irq callback in core gpiolib code - fix PWM period calculation in gpio-mvebu - make gpio-sifive Kconfig entry consistent with other drivers - fix a build issue in gpio-tegra * tag 'gpio-fixes-for-v5.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: gpio: tegra: Add missing dependencies gpio: sifive: select IRQ_DOMAIN_HIERARCHY rather than depend on it gpio: mvebu: fix pwm .get_state period calculation gpiolib: add a warning on gpiochip->to_irq defined tools: gpio: fix %llu warning in gpio-watch.c tools: gpio: fix %llu warning in gpio-event-mon.c gpiolib: cdev: fix frame size warning in gpio_ioctl()
2021-01-21Merge tag 'pinctrl-v5.11-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control fixes from Linus Walleij: "These are all driver fixes, the Qualcomm stuff is the most widely used and important: - The main matter is a complicated fixup for the Qualcomm deep sleep states. This manifests in how interrupts get handled or in some cases not handled in cooperation with the PDC (Power Domain Controller). It's one of these really hardcore bug fixes that signifies high maturity of the platform. - Fix a register layout problem in the JZ4760 driver - Fix a register offset in the Aspeed G6 driver - Fix a compiler warning in the Nomadik driver - Fix a fallback code path in the mediatek driver" * tag 'pinctrl-v5.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: pinctrl: qcom: Don't clear pending interrupts when enabling pinctrl: qcom: Properly clear "intr_ack_high" interrupts when unmasking pinctrl: qcom: No need to read-modify-write the interrupt status pinctrl: qcom: Allow SoCs to specify a GPIO function that's not 0 pinctrl: mediatek: Fix fallback call path pinctrl: nomadik: Remove unused variable in nmk_gpio_dbg_show_one pinctrl: aspeed: g6: Fix PWMG0 pinctrl setting pinctrl: ingenic: Rename registers from JZ4760_GPIO_* to JZ4770_GPIO_* pinctrl: ingenic: Fix JZ4760 support
2021-01-21driver core: Fix device link device name collisionSaravana Kannan
The device link device's name was of the form: <supplier-dev-name>--<consumer-dev-name> This can cause name collision as reported here [1] as device names are not globally unique. Since device names have to be unique within the bus/class, add the bus/class name as a prefix to the device names used to construct the device link device name. So the devuce link device's name will be of the form: <supplier-bus-name>:<supplier-dev-name>--<consumer-bus-name>:<consumer-dev-name> [1] - https://lore.kernel.org/lkml/20201229033440.32142-1-michael@walle.cc/ Fixes: 287905e68dd2 ("driver core: Expose device link details in sysfs") Cc: stable@vger.kernel.org Reported-by: Michael Walle <michael@walle.cc> Tested-by: Michael Walle <michael@walle.cc> Signed-off-by: Saravana Kannan <saravanak@google.com> Link: https://lore.kernel.org/r/20210110175408.1465657-1-saravanak@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-21habanalabs: disable FW events on device removalOded Gabbay
When device is removed, we need to make sure the F/W won't send us any more events because during the remove process we disable the interrupts. Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2021-01-21habanalabs: fix backward compatibility of idle checkOded Gabbay
Need to take the lower 32 bits of the driver's 64-bit idle mask and put it in the legacy 32-bit variable that the userspace reads to know the idle mask. Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2021-01-21habanalabs: zero pci counters packet before submit to FWOfir Bitton
Driver does not zero some pci counters packets before sending to FW. This causes an out of sync PI/CI between driver and FW. Signed-off-by: Ofir Bitton <obitton@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2021-01-21intel_th: pci: Add Alder Lake-P supportAlexander Shishkin
This adds support for the Trace Hub in Alder Lake-P. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Link: https://lore.kernel.org/r/20210115195917.3184-3-alexander.shishkin@linux.intel.com Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-21stm class: Fix module init return on allocation failureWang Hui
In stm_heartbeat_init(): return value gets reset after the first iteration by stm_source_register_device(), so allocation failures after that will, after a clean up, return success. Fix that. Fixes: 119291853038 ("stm class: Add heartbeat stm source device") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wang Hui <john.wanghui@huawei.com> Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Link: https://lore.kernel.org/r/20210115195917.3184-2-alexander.shishkin@linux.intel.com Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-21driver core: Extend device_is_dependent()Rafael J. Wysocki
If the device passed as the target (second argument) to device_is_dependent() is not completely registered (that is, it has been initialized, but not added yet), but the parent pointer of it is set, it may be missing from the list of the parent's children and device_for_each_child() called by device_is_dependent() cannot be relied on to catch that dependency. For this reason, modify device_is_dependent() to check the ancestors of the target device by following its parent pointer in addition to the device_for_each_child() walk. Fixes: 9ed9895370ae ("driver core: Functional dependencies tracking support") Reported-by: Stephan Gerhold <stephan@gerhold.net> Tested-by: Stephan Gerhold <stephan@gerhold.net> Reviewed-by: Saravana Kannan <saravanak@google.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Link: https://lore.kernel.org/r/17705994.d592GUb2YH@kreacher Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-21drm/amdgpu: update mmhub mgcg&ls for mmhub_v2_3Aaron Liu
Starting from vangogh, the ATCL2 and DAGB0 registers relative to mgcg/ls has changed. For MGCG: Replace mmMM_ATC_L2_MISC_CG with mmMM_ATC_L2_CGTT_CLK_CTRL. For MGLS: Replace mmMM_ATC_L2_MISC_CG with mmMM_ATC_L2_CGTT_CLK_CTRL. Add DAGB0_(WR/RD)_CGTT_CLK_CTRL registers. Signed-off-by: Aaron Liu <aaron.liu@amd.com> Acked-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-01-21drm/amdgpu: modify GCR_GENERAL_CNTL for VangoghJinzhou Su
GCR_GENERAL_CNTL is defined differently in gc_10_1_0_offset.h and gc_10_3_0_offset.h. Update GCR_GENERAL_CNTL for Vangogh. Signed-off-by: Jinzhou Su <Jinzhou.Su@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-01-21drm/amdgpu/pm: no need GPU status set since ↵Prike Liang
mmnbif_gpu_BIF_DOORBELL_FENCE_CNTL added in FSDL In the renoir there is no need GpuChangeState message set to exit gfxoff in the s0i3 resume since mmnbif_gpu_BIF_DOORBELL_FENCE_CNTL has been added in the s0i3 FSDL. Signed-off-by: Prike Liang <Prike.Liang@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2021-01-21drm/amd/display: Fixed corruptions on HPDRX link loss restoreVladimir Stempen
[why] Heavy corruption or blank screen reported on wake, with 6k display connected and FEC enabled [how] When Disable/Enable stream for display pipes on HPDRX, DC should take into account ODM split pipes. Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Vladimir Stempen <vladimir.stempen@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Anson Jacob <anson.jacob@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-01-21drm/amd/display: Use hardware sequencer functions for PG controlNicholas Kazlauskas
[Why & How] These can differ per ASIC or not be present. Don't call the dcn20 ones directly but rather the ones defined by the ASIC init table. Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Eric Yang <eric.yang2@amd.com> Acked-by: Anson Jacob <anson.jacob@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-01-21drm/amd/display: Change function decide_dp_link_settings to avoid infinite ↵Bing Guo
looping Why: Function decide_dp_link_settings() loops infinitely when required bandwidth can't be supported. How: Check the required bandwidth against verified_link_cap before trying to find a link setting for it. Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Bing Guo <bing.guo@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Anson Jacob <anson.jacob@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-01-21drm/amd/display: Allow PSTATE chnage when no displays are enabledAric Cyr
[Why] When no displays are currently enabled, display driver should not disallow PSTATE switching. [How] Allow PSTATE switching if either the active configuration supports it, or there are no active displays. Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Aric Cyr <aric.cyr@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Anson Jacob <anson.jacob@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-01-21drm/amd/display: Update dram_clock_change_latency for DCN2.1Jake Wang
[WHY] dram clock change latencies get updated using ddr4 latency table, but that update does not happen before validation. This value should not be the default and should be number received from df for better mode support. This may cause a PState hang on high refresh panels with short vblanks such as on 1080p 360hz or 300hz panels. [HOW] Update latency from 23.84 to 11.72. Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Jake Wang <haonan.wang2@amd.com> Reviewed-by: Sung Lee <Sung.Lee@amd.com> Acked-by: Anson Jacob <anson.jacob@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-01-21drm/amdgpu: remove gpu info firmware of green sardineHuang Rui
The ip discovery is supported on green sardine, it doesn't need gpu info firmware anymore. Signed-off-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Prike Liang <Prike.Liang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 5.10.x
2021-01-21drm/amd/display: DCN2X Find Secondary Pipe properly in MPO + ODM CaseSung Lee
[WHY] Previously as MPO + ODM Combine was not supported, finding secondary pipes for each case was mutually exclusive. Now that both are supported at the same time, both cases should be taken into account when finding a secondary pipe. [HOW] If a secondary pipe cannot be found based on previous bottom pipe, search for a second pipe using next_odm_pipe instead. Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Sung Lee <sung.lee@amd.com> Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by: Anson Jacob <anson.jacob@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 5.10.x
2021-01-21lightnvm: fix memory leak when submit failsPan Bian
The allocated page is not released if error occurs in nvm_submit_io_sync_raw(). __free_page() is moved ealier to avoid possible memory leak issue. Fixes: aff3fb18f957 ("lightnvm: move bad block and chunk state logic to core") Signed-off-by: Pan Bian <bianpan2016@163.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-01-21mac80211_hwsim: add 6GHz channelsRamon Fontes
Advertise 6GHz channels to mac80211. Signed-off-by: Ramon Fontes <ramonreisfontes@gmail.com> Link: https://lore.kernel.org/r/20201227031155.81161-1-ramonreisfontes@gmail.com [reword commit message] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-01-21Merge tag 'nvme-5.11-2020-01-21' of git://git.infradead.org/nvme into block-5.11Jens Axboe
Pull NVMe fixes from Christoph: "nvme fixes for 5.11: - fix a status code in nvmet (Chaitanya Kulkarni) - avoid double completions in nvme-rdma/nvme-tcp (Chao Leng) - fix the CMB support to cope with NVMe 1.4 controllers (Klaus Jensen) - fix PRINFO handling in the passthrough ioctl (Revanth Rajashekar) - fix a double DMA unmap in nvme-pci" * tag 'nvme-5.11-2020-01-21' of git://git.infradead.org/nvme: nvme-pci: fix error unwind in nvme_map_data nvme-pci: refactor nvme_unmap_data nvmet: set right status on error in id-ns handler nvme-pci: allow use of cmb on v1.4 controllers nvme-tcp: avoid request double completion for concurrent nvme_tcp_timeout nvme-rdma: avoid request double completion for concurrent nvme_rdma_timeout nvme: check the PRINFO bit before deciding the host buffer length
2021-01-21efi/arm64: Update debug prints to reflect other entropy sourcesMark Brown
Currently the EFI stub prints a diagnostic on boot saying that KASLR will be disabled if it is unable to use the EFI RNG protocol to obtain a seed for KASLR. With the addition of support for v8.5-RNG and the SMCCC RNG protocol it is now possible for KASLR to obtain entropy even if the EFI RNG protocol is unsupported in the system, and the main kernel now explicitly says if KASLR is active itself. This can result in a boot log where the stub says KASLR has been disabled and the main kernel says that it is enabled which is confusing for users. Remove the explicit reference to KASLR from the diagnostics, the warnings are still useful as EFI is the only source of entropy the stub uses when randomizing the physical address of the kernel and the other sources may not be available. Signed-off-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20210120163810.14973-1-broonie@kernel.org Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
2021-01-21tee: optee: replace might_sleep with cond_reschedRouven Czerwinski
might_sleep() is a debugging aid and triggers rescheduling only for certain kernel configurations. Replace with an explicit check and reschedule to work for all kernel configurations. Fixes the following trace: [ 572.945146] rcu: INFO: rcu_sched self-detected stall on CPU [ 572.949275] rcu: 0-....: (2099 ticks this GP) idle=572/1/0x40000002 softirq=7412/7412 fqs=974 [ 572.957964] (t=2100 jiffies g=10393 q=21) [ 572.962054] NMI backtrace for cpu 0 [ 572.965540] CPU: 0 PID: 165 Comm: xtest Not tainted 5.8.7 #1 [ 572.971188] Hardware name: STM32 (Device Tree Support) [ 572.976354] [<c011163c>] (unwind_backtrace) from [<c010b7f8>] (show_stack+0x10/0x14) [ 572.984080] [<c010b7f8>] (show_stack) from [<c0511e4c>] (dump_stack+0xc4/0xd8) [ 572.991300] [<c0511e4c>] (dump_stack) from [<c0519abc>] (nmi_cpu_backtrace+0x90/0xc4) [ 572.999130] [<c0519abc>] (nmi_cpu_backtrace) from [<c0519bdc>] (nmi_trigger_cpumask_backtrace+0xec/0x130) [ 573.008706] [<c0519bdc>] (nmi_trigger_cpumask_backtrace) from [<c01a5184>] (rcu_dump_cpu_stacks+0xe8/0x110) [ 573.018453] [<c01a5184>] (rcu_dump_cpu_stacks) from [<c01a4234>] (rcu_sched_clock_irq+0x7fc/0xa88) [ 573.027416] [<c01a4234>] (rcu_sched_clock_irq) from [<c01acdd0>] (update_process_times+0x30/0x8c) [ 573.036291] [<c01acdd0>] (update_process_times) from [<c01bfb90>] (tick_sched_timer+0x4c/0xa8) [ 573.044905] [<c01bfb90>] (tick_sched_timer) from [<c01adcc8>] (__hrtimer_run_queues+0x174/0x358) [ 573.053696] [<c01adcc8>] (__hrtimer_run_queues) from [<c01aea2c>] (hrtimer_interrupt+0x118/0x2bc) [ 573.062573] [<c01aea2c>] (hrtimer_interrupt) from [<c09ad664>] (arch_timer_handler_virt+0x28/0x30) [ 573.071536] [<c09ad664>] (arch_timer_handler_virt) from [<c0190f50>] (handle_percpu_devid_irq+0x8c/0x240) [ 573.081109] [<c0190f50>] (handle_percpu_devid_irq) from [<c018ab8c>] (generic_handle_irq+0x34/0x44) [ 573.090156] [<c018ab8c>] (generic_handle_irq) from [<c018b194>] (__handle_domain_irq+0x5c/0xb0) [ 573.098857] [<c018b194>] (__handle_domain_irq) from [<c052ac50>] (gic_handle_irq+0x4c/0x90) [ 573.107209] [<c052ac50>] (gic_handle_irq) from [<c0100b0c>] (__irq_svc+0x6c/0x90) [ 573.114682] Exception stack(0xd90dfcf8 to 0xd90dfd40) [ 573.119732] fce0: ffff0004 00000000 [ 573.127917] fd00: 00000000 00000000 00000000 00000000 00000000 00000000 d93493cc ffff0000 [ 573.136098] fd20: d2bc39c0 be926998 d90dfd58 d90dfd48 c09f3384 c01151f0 400d0013 ffffffff [ 573.144281] [<c0100b0c>] (__irq_svc) from [<c01151f0>] (__arm_smccc_smc+0x10/0x20) [ 573.151854] [<c01151f0>] (__arm_smccc_smc) from [<c09f3384>] (optee_smccc_smc+0x3c/0x44) [ 573.159948] [<c09f3384>] (optee_smccc_smc) from [<c09f4170>] (optee_do_call_with_arg+0xb8/0x154) [ 573.168735] [<c09f4170>] (optee_do_call_with_arg) from [<c09f4638>] (optee_invoke_func+0x110/0x190) [ 573.177786] [<c09f4638>] (optee_invoke_func) from [<c09f1ebc>] (tee_ioctl+0x10b8/0x11c0) [ 573.185879] [<c09f1ebc>] (tee_ioctl) from [<c029f62c>] (ksys_ioctl+0xe0/0xa4c) [ 573.193101] [<c029f62c>] (ksys_ioctl) from [<c0100060>] (ret_fast_syscall+0x0/0x54) [ 573.200750] Exception stack(0xd90dffa8 to 0xd90dfff0) [ 573.205803] ffa0: be926bf4 be926a78 00000003 8010a403 be926908 004e3cf8 [ 573.213987] ffc0: be926bf4 be926a78 00000000 00000036 be926908 be926918 be9269b0 bffdf0f8 [ 573.222162] ffe0: b6d76fb0 be9268fc b6d66621 b6c7e0d8 seen on STM32 DK2 with CONFIG_PREEMPT_NONE. Fixes: 9f02b8f61f29 ("tee: optee: add might_sleep for RPC requests") Signed-off-by: Rouven Czerwinski <r.czerwinski@pengutronix.de> Tested-by: Sumit Garg <sumit.garg@linaro.org> [jw: added fixes tag + small adjustments in the code] Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2021-01-21Merge branch 'tty-splice' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into tty-next Fixes both the "splice/sendfile to a tty" and "splice/sendfile from a tty" regression from 5.10. * 'tty-splice' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux: tty: teach the n_tty ICANON case about the new "cookie continuations" too tty: teach n_tty line discipline about the new "cookie continuations" tty: clean up legacy leftovers from n_tty line discipline tty: implement read_iter tty: convert tty_ldisc_ops 'read()' function to take a kernel pointer tty: implement write_iter
2021-01-21Merge 9bb48c82aced ("tty: implement write_iter") into tty-linusGreg Kroah-Hartman
We want the single "splice/sendfile to a tty" regression fix into tty-linus so it can get into 5.11-final, while the larger patch series fixing "splice/sendfile from a tty" should wait for 5.12-rc1 so that we get more testing. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-20net: stmmac: dwmac-meson8b: fix the RX delay validationMartin Blumenstingl
When has_prg_eth1_rgmii_rx_delay is true then we support RX delays between 0ps and 3000ps in 200ps steps. Swap the validation of the RX delay based on the has_prg_eth1_rgmii_rx_delay flag so the 200ps check is now applied correctly on G12A SoCs (instead of only allow 0ps or 2000ps on G12A, but 0..3000ps in 200ps steps on older SoCs which don't support that). Fixes: de94fc104d58ea ("net: stmmac: dwmac-meson8b: add support for the RGMII RX delay on G12A") Reported-by: Martijn van Deventer <martijn@martijnvandeventer.nl> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Link: https://lore.kernel.org/r/20210119202424.591349-1-martin.blumenstingl@googlemail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-20net: dsa: microchip: Adjust reset release timing to match reference reset ↵Marek Vasut
circuit KSZ8794CNX datasheet section 8.0 RESET CIRCUIT describes recommended circuit for interfacing with CPU/FPGA reset consisting of 10k pullup resistor and 10uF capacitor to ground. This circuit takes ~100 ms to rise enough to release the reset. For maximum supply voltage VDDIO=3.3V VIH=2.0V R=10kR C=10uF that is VDDIO - VIH t = R * C * -ln( ------------- ) = 10000*0.00001*-(-0.93)=0.093 s VDDIO so we need ~95 ms for the reset to really de-assert, and then the original 100us for the switch itself to come out of reset. Simply msleep() for 100 ms which fits the constraint with a bit of extra space. Fixes: 5b797980908a ("net: dsa: microchip: Implement recommended reset timing") Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Marek Vasut <marex@denx.de> Cc: Michael Grzeschik <m.grzeschik@pengutronix.de> Reviewed-by: Paul Barker <pbarker@konsulko.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20210120030502.617185-1-marex@denx.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-20net: dsa: microchip: ksz8795: Fix KSZ8794 port map againMarek Vasut
The KSZ8795 switch has 4 external ports {0,1,2,3} and 1 CPU port {4}, so does the KSZ8765. The KSZ8794 seems to be repackaged KSZ8795 with different ID and port 3 not routed out, however the port 3 registers are present in the silicon, so the KSZ8794 switch has 3 external ports {0,1,2} and 1 CPU port {4}. Currently the driver always uses the last port as CPU port, on KSZ8795/KSZ8765 that is port 4 and that is OK, but on KSZ8794 that is port 3 and that is not OK, as it must also be port 4. This patch adjusts the driver such that it always registers a switch with 5 ports total (4 external ports, 1 CPU port), always sets the CPU port to switch port 4, and then configures the external port mask according to the switch model -- 3 ports for KSZ8794 and 4 for KSZ8795/KSZ8765. Fixes: 68a1b676db52 ("net: dsa: microchip: ksz8795: remove superfluous port_cnt assignment") Fixes: 4ce2a984abd8 ("net: dsa: microchip: ksz8795: use phy_port_cnt where possible") Fixes: 241ed719bc98 ("net: dsa: microchip: ksz8795: use port_cnt instead of TOTOAL_PORT_NUM") Signed-off-by: Marek Vasut <marex@denx.de> Cc: Michael Grzeschik <m.grzeschik@pengutronix.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20210120001045.488506-1-marex@denx.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-20scsi: qla2xxx: Fix description for parameter ql2xenforce_iocb_limitEnzo Matsumiya
Parameter ql2xenforce_iocb_limit is enabled by default. Link: https://lore.kernel.org/r/20210118184922.23793-1-ematsumiya@suse.de Fixes: 89c72f4245a8 ("scsi: qla2xxx: Add IOCB resource tracking") Reviewed-by: Daniel Wagner <dwagner@suse.de> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Enzo Matsumiya <ematsumiya@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-01-20scsi: target: iscsi: Fix typo in commentValdis Klētnieks
Correct the spelling of Nagle's name in a comment. Link: https://lore.kernel.org/r/2921.1610694423@turing-police Reviewed-by: Chaitanya Kulkarni <chiatanya.kulkarni@wdc.com> Signed-off-by: Valdis Klētnieks <valdis.kletnieks@vt.edu> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
generated by cgit (git 2.34.1) at 2025-09-24 04:35:20 +0000