| Age | Commit message (Collapse) | Author |
|---|
|
Add support for the SteelSeries Arctis 9 headset. This driver
will export the battery information like it already does for
the Arcits 1 headset.
Signed-off-by: Christian Mayer <git@mayer-bgk.de>
Reviewed-by: Bastien Nocera <hadess@hadess.net>
Tested-by: Bastien Nocera <hadess@hadess.net>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Refactor code and add calls to hid_hw_open/hid_hw_closed in preparation
for adding support for the SteelSeries Arctis 9 headset.
Signed-off-by: Christian Mayer <git@mayer-bgk.de>
Reviewed-by: Bastien Nocera <hadess@hadess.net>
Tested-by: Bastien Nocera <hadess@hadess.net>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-6.13-2025-01-15:
amdgpu:
- SMU 13 fix
- DP MST fixes
- DCN 3.5 fix
- PSR fixes
- eDP fix
- VRR fix
- Enforce isolation fixes
- GFX 12 fix
- PSP 14.x fix
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250115151602.210704-1-alexander.deucher@amd.com
|
|
This is modeled similar to how software steering works:
- a reference-counted matcher is maintained for each
combination of nat/no_nat x ipv4/ipv6 x tcp/udp/gre.
- adding a rule involves finding+referencing or creating a corresponding
matcher, then actually adding a rule.
- updating rules is implemented using the bwc_rule update API, which can
change a rule's actions without touching the match value.
By using a T-Rex traffic generator to initiate multi-million UDP flows
per second, a kernel running with these patches on the RX side was able
to offload ~600K flows per second, which is about ~7x larger than what
software steering could do on the same hardware (256-thread AMD EPYC,
512 GB RAM, ConnectX-7 b2b).
Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Jianbo Liu <jianbol@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20250114130646.1937192-5-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This function checks whether a flow_rule has the right flow dissector
keys and masks used for a connection tracking flow offload. It is
currently used locally by the tc_ct smfs module, but is about to be used
from another place, so this commit moves it to a better place, renames
it to mlx5e_tc_ct_is_valid_flow_rule and drops the unused fs argument.
Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Jianbo Liu <jianbol@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20250114130646.1937192-4-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Connection tracking can offload tuple matches to the NIC either via
firmware commands (when the steering mode is dmfs or offload support is
disabled due to eswitch being set to legacy) or via software-managed
flow steering (smfs).
This commit adds stub operations for a third mode, hardware-managed flow
steering. This is enabled when both CONFIG_MLX5_TC_CT and
CONFIG_MLX5_HW_STEERING are enabled.
Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Jianbo Liu <jianbol@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20250114130646.1937192-3-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When checking if the matcher size can be increased, check both
match and action RTCs. Also, consider the increasing step - check
that it won't cause the new matcher size to become unsupported.
Additionally, since we're using '+ 1' for action RTC size yet
again, define it as macro and use in all the required places.
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20250114130646.1937192-2-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Wrap napi_enable() / napi_disable() with netdev_lock().
Provide the "already locked" flavor of the API.
iavf needs the usual adjustment. A number of drivers call
napi_enable() under a spin lock, so they have to be modified
to take netdev_lock() first, then spin lock then call
napi_enable_locked().
Protecting napi_enable() implies that napi->napi_id is protected
by netdev_lock().
Acked-by: Francois Romieu <romieu@fr.zoreil.com> # via-velocity
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250115035319.559603-7-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Hold netdev->lock when NAPIs are getting added or removed.
This will allow safe access to NAPI instances of a net_device
without rtnl_lock.
Create a family of helpers which assume the lock is already taken.
Switch iavf to them, as it makes extensive use of netdev->lock,
already.
Reviewed-by: Joe Damato <jdamato@fastly.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250115035319.559603-6-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add helpers for locking the netdev instance, use it in drivers
and the shaper code. This will make grepping for the lock usage
much easier, as we extend the lock to cover more fields.
Reviewed-by: Joe Damato <jdamato@fastly.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Link: https://patch.msgid.link/20250115035319.559603-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes
drm-misc-fixes for v6.13:
- itee-it6263 error handling fix.
- Fix warn when unloading v3d.
- Fix W=1 build for kunit tests.
- Fix backlight regression for macbooks 5,1 in nouveau.
- Handle YCbCr420 better in bridge code, with tests.
- Fix cross-device fence handling in nouveau.
- Fix BO reservation handling in vmwgfx.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/a89adcd5-2042-4e7f-93f4-2b299bb1ef17@linux.intel.com
|
|
Currently, the driver is seriously broken with respect to the
hibernation (S4): after image restore the device is back into
IPC_MEM_EXEC_STAGE_BOOT (which AFAIK means bootloader stage) and needs
full re-launch of the rest of its firmware, but the driver restore
handler treats the device as merely sleeping and just sends it a
wake-up command.
This wake-up command times out but device nodes (/dev/wwan*) remain
accessible.
However attempting to use them causes the bootloader to crash and
enter IPC_MEM_EXEC_STAGE_CD_READY stage (which apparently means "a crash
dump is ready").
It seems that the device cannot be re-initialized from this crashed
stage without toggling some reset pin (on my test platform that's
apparently what the device _RST ACPI method does).
While it would theoretically be possible to rewrite the driver to tear
down the whole MUX / IPC layers on hibernation (so the bootloader does
not crash from improper access) and then re-launch the device on
restore this would require significant refactoring of the driver
(believe me, I've tried), since there are quite a few assumptions
hard-coded in the driver about the device never being partially
de-initialized (like channels other than devlink cannot be closed,
for example).
Probably this would also need some programming guide for this hardware.
Considering that the driver seems orphaned [1] and other people are
hitting this issue too [2] fix it by simply unbinding the PCI driver
before hibernation and re-binding it after restore, much like
USB_QUIRK_RESET_RESUME does for USB devices that exhibit a similar
problem.
Tested on XMM7360 in HP EliteBook 855 G7 both with s2idle (which uses
the existing suspend / resume handlers) and S4 (which uses the new code).
[1]: https://lore.kernel.org/all/c248f0b4-2114-4c61-905f-466a786bdebb@leemhuis.info/
[2]:
https://github.com/xmm7360/xmm7360-pci/issues/211#issuecomment-1804139413
Reviewed-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name>
Link: https://patch.msgid.link/e60287ebdb0ab54c4075071b72568a40a75d0205.1736372610.git.mail@maciej.szmigiero.name
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2025-01-08 (ice)
This series contains updates to ice driver only.
Przemek reworks implementation so that ice_init_hw() is called before
ice_adapter initialization. The motivation is to have ability to act
on the number of PFs in ice_adapter initialization. This is not done
here but the code is also a bit cleaner.
Michal adds priority to be considered when matching recipes for proper
differentiation.
Konrad adds devlink health reporting for firmware generated events.
R Sundar utilizes string helpers over open coded versions.
Jake adds implementation to utilize a lower latency interface to program
PHY timer when supported.
Additional information can be found on the original cover letter:
https://lore.kernel.org/intel-wired-lan/20241216145453.333745-1-anton.nadezhdin@intel.com/
Karol adds and allows for different PTP delay values to be used per pin.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
ice: Add in/out PTP pin delays
ice: implement low latency PHY timer updates
ice: check low latency PHY timer update firmware capability
ice: add lock to protect low latency interface
ice: rename TS_LL_READ* macros to REG_LL_PROXY_H_*
ice: use read_poll_timeout_atomic in ice_read_phy_tstamp_ll_e810
ice: use string choice helpers
ice: add fw and port health reporters
ice: add recipe priority check in search
ice: ice_probe: init ice_adapter after HW init
ice: minor: rename goto labels from err to unroll
ice: split ice_init_hw() out from ice_init_dev()
ice: c827: move wait for FW to ice_init_hw()
====================
Link: https://patch.msgid.link/20250115000844.714530-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Support spread spectrum clock generation for the main PLL, the only one
for which this functionality is available.
Tested on the STM32F469I-DISCO board.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Link: https://lore.kernel.org/r/20250114182021.670435-5-dario.binacchi@amarulasolutions.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Use GENMASK() along with FIELD_GET() and FIELD_PREP() helpers to access
the PLLCFGR fields instead of manually masking and shifting.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Link: https://lore.kernel.org/r/20250114182021.670435-4-dario.binacchi@amarulasolutions.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Following fields of 'struct mr_mfc' can be updated
concurrently (no lock protection) from ip_mr_forward()
and ip6_mr_forward()
- bytes
- pkt
- wrong_if
- lastuse
They also can be read from other functions.
Convert bytes, pkt and wrong_if to atomic_long_t,
and use READ_ONCE()/WRITE_ONCE() for lastuse.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20250114221049.1190631-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
HDS options(tcp-data-split, hds-thresh) have dependencies between other
features like XDP. Basic dependencies are checked in the core API.
netdevsim is very useful to check basic dependencies.
The default tcp-data-split mode is UNKNOWN but netdevsim driver
returns ENABLED when ethtool dumps tcp-data-split mode.
The default value of HDS threshold is 0 and the maximum value is 1024.
ethtool shows like this.
ethtool -g eni1np1
Ring parameters for eni1np1:
Pre-set maximums:
...
HDS thresh: 1024
Current hardware settings:
...
TCP data split: on
HDS thresh: 0
ethtool -G eni1np1 tcp-data-split on hds-thresh 1024
ethtool -g eni1np1
Ring parameters for eni1np1:
Pre-set maximums:
...
HDS thresh: 1024
Current hardware settings:
...
TCP data split: on
HDS thresh: 1024
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Link: https://patch.msgid.link/20250114142852.3364986-10-ap420073@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The bnxt_en driver has configured the hds_threshold value automatically
when TPA is enabled based on the rx-copybreak default value.
Now the hds-thresh ethtool command is added, so it adds an
implementation of hds-thresh option.
Configuration of the hds-thresh is applied only when
the tcp-data-split is enabled. The default value of
hds-thresh is 256, which is the default value of
rx-copybreak, which used to be the hds_thresh value.
The maximum hds-thresh is 1023.
# Example:
# ethtool -G enp14s0f0np0 tcp-data-split on hds-thresh 256
# ethtool -g enp14s0f0np0
Ring parameters for enp14s0f0np0:
Pre-set maximums:
...
HDS thresh: 1023
Current hardware settings:
...
TCP data split: on
HDS thresh: 256
Tested-by: Stanislav Fomichev <sdf@fomichev.me>
Tested-by: Andy Gospodarek <gospo@broadcom.com>
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20250114142852.3364986-9-ap420073@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
NICs that uses bnxt_en driver supports tcp-data-split feature by the
name of HDS(header-data-split).
But there is no implementation for the HDS to enable by ethtool.
Only getting the current HDS status is implemented and The HDS is just
automatically enabled only when either LRO, HW-GRO, or JUMBO is enabled.
The hds_threshold follows rx-copybreak value. and it was unchangeable.
This implements `ethtool -G <interface name> tcp-data-split <value>`
command option.
The value can be <on> and <auto>.
The value is <auto> and one of LRO/GRO/JUMBO is enabled, HDS is
automatically enabled and all LRO/GRO/JUMBO are disabled, HDS is
automatically disabled.
HDS feature relies on the aggregation ring.
So, if HDS is enabled, the bnxt_en driver initializes the aggregation ring.
This is the reason why BNXT_FLAG_AGG_RINGS contains HDS condition.
Acked-by: Jakub Kicinski <kuba@kernel.org>
Tested-by: Stanislav Fomichev <sdf@fomichev.me>
Tested-by: Andy Gospodarek <gospo@broadcom.com>
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20250114142852.3364986-8-ap420073@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The bnxt_en driver supports rx-copybreak, but it couldn't be set by
userspace. Only the default value(256) has worked.
This patch makes the bnxt_en driver support following command.
`ethtool --set-tunable <devname> rx-copybreak <value> ` and
`ethtool --get-tunable <devname> rx-copybreak`.
By this patch, hds_threshol is set to the rx-copybreak value.
But it will be set by `ethtool -G eth0 hds-thresh N`
in the next patch.
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Tested-by: Stanislav Fomichev <sdf@fomichev.me>
Tested-by: Andy Gospodarek <gospo@broadcom.com>
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20250114142852.3364986-7-ap420073@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
blackhole_netdev is the global device in init_net.
Let's hold rtnl_net_lock(&init_net) in blackhole_netdev_init().
While at it, the unnecessary dev_net_set() call is removed, which
is done in alloc_netdev_mqs().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250114081352.47404-1-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This patch adds support for hardware monitoring to the fbnic driver,
allowing for temperature and voltage sensor data to be exposed to
userspace via the HWMON interface. The driver registers a HWMON device
and provides callbacks for reading sensor data, enabling system
admins to monitor the health and operating conditions of fbnic.
Signed-off-by: Sanman Pradhan <sanman.p211993@gmail.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Link: https://patch.msgid.link/20250114000705.2081288-4-sanman.p211993@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add support for reading temperature and voltage sensor data from firmware
by implementing a new TSENE message type and response parsing. This adds
message handler infrastructure to transmit sensor read requests and parse
responses. The sensor data will be exposed through the driver's hwmon interface.
Signed-off-by: Sanman Pradhan <sanman.p211993@gmail.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Link: https://patch.msgid.link/20250114000705.2081288-3-sanman.p211993@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add infrastructure to support firmware request/response handling with
completions. Add a completion structure to track message state including
message type for matching, completion for waiting for response, and
result for error propagation. Use existing spinlock to protect the writes.
The data from the various response types will be added to the "union u"
by subsequent commits.
Signed-off-by: Sanman Pradhan <sanman.p211993@gmail.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Link: https://patch.msgid.link/20250114000705.2081288-2-sanman.p211993@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The lan969x switch device supports manual frame injection and extraction
to and from the switch core, using a number of injection and extraction
queues. This technique is currently supported, but delivers poor
performance compared to Frame DMA (FDMA).
This lan969x implementation of FDMA, hooks into the existing FDMA for
Sparx5, but requires its own RX and TX handling, as lan969x does not
support the same native cache coherency that Sparx5 does. Effectively,
this means that we are going to use the DMA mapping API for mapping and
unmapping TX buffers. The RX loop will utilize the page pool API for
efficient RX handling. Other than that, the implementation is largely
the same, and utilizes the FDMA library for DCB and DB handling.
Some numbers:
Manual injection/extraction (before this series):
// iperf3 -c 1.0.1.1
[ ID] Interval Transfer Bitrate
[ 5] 0.00-10.02 sec 345 MBytes 289 Mbits/sec sender
[ 5] 0.00-10.06 sec 345 MBytes 288 Mbits/sec receiver
FDMA (after this series):
// iperf3 -c 1.0.1.1
[ ID] Interval Transfer Bitrate
[ 5] 0.00-10.03 sec 1.10 GBytes 940 Mbits/sec sender
[ 5] 0.00-10.07 sec 1.10 GBytes 936 Mbits/sec receiver
Reviewed-by: Steen Hegelund <Steen.Hegelund@microchip.com>
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Link: https://patch.msgid.link/20250113-sparx5-lan969x-switch-driver-5-v2-5-c468f02fd623@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We are going to implement the RX and TX paths a bit differently on
lan969x and therefore need to introduce new ops for FDMA functions:
init, deinit, xmit and poll. Assign the Sparx5 equivalents for these and
update the code throughout. Also add a 'struct net_device' argument to
the xmit() function, as we will be needing that for lan969x.
Reviewed-by: Steen Hegelund <Steen.Hegelund@microchip.com>
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Link: https://patch.msgid.link/20250113-sparx5-lan969x-switch-driver-5-v2-4-c468f02fd623@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The function sparx5_fdma_tx_activate() is responsible for configuring
the TX FDMA instance and activating the channel. TX activation has
previously been done in the xmit() function, when the first frame is
transmitted. Now that we have separate functions for starting and
stopping the FDMA, it seems reasonable to move the TX activation to the
start function. This change has no implications on the functionality.
Reviewed-by: Steen Hegelund <Steen.Hegelund@microchip.com>
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Link: https://patch.msgid.link/20250113-sparx5-lan969x-switch-driver-5-v2-3-c468f02fd623@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The two functions: sparx5_fdma_{start(),stop()} are responsible for a
number of things, namely: allocation and initialization of FDMA buffers,
activation FDMA channels in hardware and activation of the NAPI
instance.
This patch splits the buffer allocation and initialization into init and
deinit functions, and the channel and NAPI activation into start and
stop functions. This serves two purposes: 1) the start() and stop()
functions can be reused for lan969x and 2) prepares for future MTU
change support, where we must be able to stop and start the FDMA
channels and NAPI instance, without free'ing and reallocating the FDMA
buffers.
Reviewed-by: Steen Hegelund <Steen.Hegelund@microchip.com>
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Link: https://patch.msgid.link/20250113-sparx5-lan969x-switch-driver-5-v2-2-c468f02fd623@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In a previous series, we made sure that FDMA was not initialized and
started on lan969x. Now that we are going to support it, undo that
change. In addition, make sure the chip ID check is only applicable on
Sparx5, as this is a check that is only relevant on this platform.
Reviewed-by: Steen Hegelund <Steen.Hegelund@microchip.com>
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Link: https://patch.msgid.link/20250113-sparx5-lan969x-switch-driver-5-v2-1-c468f02fd623@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fix use of DIV_ROUND_CLOSEST where a possibly negative value is divided
by an unsigned type by casting the unsigned type to the signed type of
the same size (st->r_sense_uohm[channel] has type of u32).
The docs on the DIV_ROUND_CLOSEST macro explain that dividing a negative
value by an unsigned type is undefined behavior. The actual behavior is
that it converts both values to unsigned before doing the division, for
example:
int ret = DIV_ROUND_CLOSEST(-100, 3U);
results in ret == 1431655732 instead of -33.
Fixes: 2b9ea4262ae9 ("hwmon: Add driver for ltc2991")
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://lore.kernel.org/r/20250115-hwmon-ltc2991-fix-div-round-closest-v1-1-b4929667e457@baylibre.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
In 4.19, before the switch to linkmode bitmaps, PHY_GBIT_FEATURES
included feature bits for aneg and TP/MII ports.
SUPPORTED_TP | \
SUPPORTED_MII)
SUPPORTED_10baseT_Full)
SUPPORTED_100baseT_Full)
SUPPORTED_1000baseT_Full)
PHY_100BT_FEATURES | \
PHY_DEFAULT_FEATURES)
PHY_1000BT_FEATURES)
Referenced commit expanded PHY_GBIT_FEATURES, silently removing
PHY_DEFAULT_FEATURES. The removed part can be re-added by using
the new PHY_GBIT_FEATURES definition.
Not clear to me is why nobody seems to have noticed this issue.
I stumbled across this when checking what it takes to make
phy_10_100_features_array et al private to phylib.
Fixes: d0939c26c53a ("net: ethernet: xgbe: expand PHY_GBIT_FEAUTRES")
Cc: stable@vger.kernel.org
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://patch.msgid.link/46521973-7738-4157-9f5e-0bb6f694acba@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When decoding clause 22 state, if in-band is disabled and using either
1000base-X or 2500base-X, rather than reporting link-down, we know the
speed, and we only support full duplex. Pause modes taken from XPCS.
This fixes a problem reported by Eric Woudstra.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Tested-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/E1tXGei-000EtL-Fn@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Rather than using the state of the Autoneg bit, which is unreliable
with the new PCS neg mode support, use the passed neg_mode to decide
whether to decode the link partner advertisement data.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Tested-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/E1tXGed-000EtF-CN@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pass the current neg_mode into phylink_mii_c22_pcs_get_state() and
phylink_mii_c22_pcs_decode_state(). Update all users of phylink PCS
that use these functions.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Tested-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/E1tXGeY-000Et9-8g@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pass the current neg_mode into the .pcs_get_state() method. Update all
users of phylink PCS.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Tested-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/E1tXGeT-000Et3-4L@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
As in-band AN no longer just depends on MLO_AN_INBAND + Autoneg bit,
we need to take account of the pcs_neg_mode when deciding how to
initialise the speed, duplex and pause state members before calling
into the .pcs_neg_mode() method. Add this.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Tested-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/E1tXGeO-000Esx-0r@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
xpcs_config_2500basex() sets DW_VR_MII_DIG_CTRL1_2G5_EN, but
xpcs_config_aneg_c37_sgmii() never unsets it. So, on a protocol change
from 2500base-x to sgmii, the DW_VR_MII_DIG_CTRL1_2G5_EN bit will remain
set.
Fixes: f27abde3042a ("net: pcs: add 2500BASEX support for Intel mGbE controller")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/20250114164721.2879380-2-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
w/o inband
On a port with SGMII fixed-link at SPEED_1000, DW_VR_MII_DIG_CTRL1 gets
set to 0x2404. This is incorrect, because bit 2 (DW_VR_MII_DIG_CTRL1_2G5_EN)
is set.
It comes from the previous write to DW_VR_MII_AN_CTRL, because the "val"
variable is reused and is dirty. Actually, its value is 0x4, aka
FIELD_PREP(DW_VR_MII_PCS_MODE_MASK, DW_VR_MII_PCS_MODE_C37_SGMII).
Resolve the issue by clearing "val" to 0 when writing to a new register.
After the fix, the register value is 0x2400.
Prior to the blamed commit, when the read-modify-write was open-coded,
the code saved the content of the DW_VR_MII_DIG_CTRL1 register in the
"ret" variable.
Fixes: ce8d6081fcf4 ("net: pcs: xpcs: add _modify() accessors")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/20250114164721.2879380-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Convert the Broadcom ASP2 driver to use phylib managed EEE support.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/E1tXk81-000r4x-TS@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Phylib maintains a copy of tx_lpi_enabled, which will be used to
populate the member when phy_ethtool_get_eee(). Therefore, writing to
this member before phy_ethtool_get_eee() will have no effect. Remove
it. Also remove setting our copy of info->eee.tx_lpi_enabled which
becomes write-only.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/E1tXk7w-000r4r-Pq@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fix the LPI timer handling in Broadcom ASP2 driver after the phylib
managed EEE patches were merged.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/E1tXk7r-000r4l-Li@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Instead of marking individual interrupts as safe to be migrated in
arbitrary contexts, mark the interrupt chips, which require the interrupt
to be moved in actual interrupt context, with the new IRQCHIP_MOVE_DEFERRED
flag. This makes more sense because this is a per interrupt chip property
and not restricted to individual interrupts.
That flips the logic from the historical opt-out to a opt-in model. This is
simpler to handle for other architectures, which default to unrestricted
affinity setting. It also allows to cleanup the redundant core logic
significantly.
All interrupt chips, which belong to a top-level domain sitting directly on
top of the x86 vector domain are marked accordingly, unless the related
setup code marks the interrupts with IRQ_MOVE_PCNTXT, i.e. XEN.
No functional change intended.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Steve Wahl <steve.wahl@hpe.com>
Acked-by: Wei Liu <wei.liu@kernel.org>
Link: https://lore.kernel.org/all/20241210103335.563277044@linutronix.de
|
|
Replace ternary (condition ? "enable" : "disable") syntax with helpers
from string_choices.h because:
1. Simple function call with one argument is easier to read. Ternary
operator has three arguments and with wrapping might lead to quite
long code.
2. Is slightly shorter thus also easier to read.
3. It brings uniformity in the text - same string.
4. Allows deduping by the linker, which results in a smaller binary
file.
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250114190612.846696-1-krzysztof.kozlowski@linaro.org
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
This backend requests a NACK from the controller driver when it detects
an error. If that request gets ignored from some reason, subsequent
accesses will wrongly be handled OK. To fix this, an error now changes
the state machine, so the backend will report NACK until a STOP
condition has been detected. This make the driver more robust against
controllers which will sadly apply the NACK not to the current byte but
the next one.
Fixes: a8335c64c5f0 ("i2c: add slave testunit driver")
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
|
|
When this controller is a target, the NACK handling had two issues.
First, the return value from the backend was not checked on the initial
WRITE_REQUESTED. So, the driver missed to send a NACK in this case.
Also, the NACK always arrives one byte late on the bus, even in the
WRITE_RECEIVED case. This seems to be a HW issue. We should then not
rely on the backend to correctly NACK the superfluous byte as well. Fix
both issues by introducing a flag which gets set whenever the backend
requests a NACK and keep sending it until we get a STOP condition.
Fixes: de20d1857dd6 ("i2c: rcar: add slave support")
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
|
|
Two characters flipped, fix them.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
|
|
When misconfigured, the initial setup of the current mux channel can
fail, too. It must be checked as well.
Fixes: 50a5ba876908 ("i2c: mux: demux-pinctrl: add driver")
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
|
|
This reverts commit 98d1fb94ce75f39febd456d6d3cbbe58b6678795.
The commit uses data nbits instead of addr nbits for dummy phase. This
causes a regression for all boards where spi-tx-bus-width is smaller
than spi-rx-bus-width. It is a common pattern for boards to have
spi-tx-bus-width == 1 and spi-rx-bus-width > 1. The regression causes
all reads with a dummy phase to become unavailable for such boards,
leading to a usually slower 0-dummy-cycle read being selected.
Most controllers' supports_op hooks call spi_mem_default_supports_op().
In spi_mem_default_supports_op(), spi_mem_check_buswidth() is called to
check if the buswidths for the op can actually be supported by the
board's wiring. This wiring information comes from (among other things)
the spi-{tx,rx}-bus-width DT properties. Based on these properties,
SPI_TX_* or SPI_RX_* flags are set by of_spi_parse_dt().
spi_mem_check_buswidth() then uses these flags to make the decision
whether an op can be supported by the board's wiring (in a way,
indirectly checking against spi-{rx,tx}-bus-width).
Now the tricky bit here is that spi_mem_check_buswidth() does:
if (op->dummy.nbytes &&
spi_check_buswidth_req(mem, op->dummy.buswidth, true))
return false;
The true argument to spi_check_buswidth_req() means the op is treated as
a TX op. For a board that has say 1-bit TX and 4-bit RX, a 4-bit dummy
TX is considered as unsupported, and the op gets rejected.
The commit being reverted uses the data buswidth for dummy buswidth. So
for reads, the RX buswidth gets used for the dummy phase, uncovering
this issue. In reality, a dummy phase is neither RX nor TX. As the name
suggests, these are just dummy cycles that send or receive no data, and
thus don't really need to have any buswidth at all.
Ideally, dummy phases should not be checked against the board's wiring
capabilities at all, and should only be sanity-checked for having a sane
buswidth value. Since we are now at rc7 and such a change might
introduce many unexpected bugs, revert the commit for now. It can be
sent out later along with the spi_mem_check_buswidth() fix.
Fixes: 98d1fb94ce75 ("mtd: spi-nor: core: replace dummy buswidth from addr to data")
Reported-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Closes: https://lore.kernel.org/linux-mtd/3342163.44csPzL39Z@steina-w/
Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Signed-off-by: Pratyush Yadav <pratyush@kernel.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ath/ath
ath.git patches for v6.14
This development cycle again featured multiple patchsets to ath12k to
support the new 802.11be MLO feature, this time including the device
grouping infrastructure, and the advertisement of MLO support to the
wireless core. However the MLO feature is still considered to be
incomplete.
In addition, there was the usual set of bug fixes and cleanups, mostly
in ath12k, but also in ath9k.
|
|
wiphy_unregister()/wiphy_free() has been recently decoupled from
wilc_netdev_cleanup() to fix a faulty error path in sdio/spi probe
functions. However this change introduced a new failure when simply
loading then unloading the driver:
$ modprobe wilc1000-sdio; modprobe -r wilc1000-sdio
WARNING: CPU: 0 PID: 115 at net/wireless/core.c:1145 wiphy_unregister+0x904/0xc40 [cfg80211]
Modules linked in: wilc1000_sdio(-) wilc1000 cfg80211 bluetooth ecdh_generic ecc
CPU: 0 UID: 0 PID: 115 Comm: modprobe Not tainted 6.13.0-rc6+ #45
Hardware name: Atmel SAMA5
Call trace:
unwind_backtrace from show_stack+0x18/0x1c
show_stack from dump_stack_lvl+0x44/0x70
dump_stack_lvl from __warn+0x118/0x27c
__warn from warn_slowpath_fmt+0xcc/0x140
warn_slowpath_fmt from wiphy_unregister+0x904/0xc40 [cfg80211]
wiphy_unregister [cfg80211] from wilc_sdio_remove+0xb0/0x15c [wilc1000_sdio]
wilc_sdio_remove [wilc1000_sdio] from sdio_bus_remove+0x104/0x3f0
sdio_bus_remove from device_release_driver_internal+0x424/0x5dc
device_release_driver_internal from driver_detach+0x120/0x224
driver_detach from bus_remove_driver+0x17c/0x314
bus_remove_driver from sys_delete_module+0x310/0x46c
sys_delete_module from ret_fast_syscall+0x0/0x1c
Exception stack(0xd0acbfa8 to 0xd0acbff0)
bfa0: 0044b210 0044b210 0044b24c 00000800 00000000 00000000
bfc0: 0044b210 0044b210 00000000 00000081 00000000 0044b210 00000000 00000000
bfe0: 00448e24 b6af99c4 0043ea0d aea2e12c
irq event stamp: 0
hardirqs last enabled at (0): [<00000000>] 0x0
hardirqs last disabled at (0): [<c01588f0>] copy_process+0x1c4c/0x7bec
softirqs last enabled at (0): [<c0158944>] copy_process+0x1ca0/0x7bec
softirqs last disabled at (0): [<00000000>] 0x0
The warning is triggered by the fact that there is still a
wireless_device linked to the wiphy we are unregistering, due to
wiphy_unregister() now being called after net device unregister (performed
in wilc_netdev_cleanup()). Fix this warning by moving wiphy_unregister()
after wilc_netdev_cleanup() is nominal paths (ie: driver removal).
wilc_netdev_cleanup() ordering is left untouched in error paths in probe
function because net device is not registered in those paths (so the
warning can not trigger), yet the wiphy can still be registered, and we
still some cleanup steps from wilc_netdev_cleanup().
Fixes: 1be94490b6b8 ("wifi: wilc1000: unregister wiphy only if it has been registered")
Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20250114-wilc1000_modprobe-v1-1-ad19d46f0c07@bootlin.com
|
