summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2025-01-15Bluetooth: qca: Fix poor RF performance for WCN6855Zijun Hu
For WCN6855, board ID specific NVM needs to be downloaded once board ID is available, but the default NVM is always downloaded currently. The wrong NVM causes poor RF performance, and effects user experience for several types of laptop with WCN6855 on the market. Fix by downloading board ID specific NVM if board ID is available. Fixes: 095327fede00 ("Bluetooth: hci_qca: Add support for QTI Bluetooth chip wcn6855") Cc: stable@vger.kernel.org # 6.4 Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com> Tested-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Johan Hovold <johan+linaro@kernel.org> Tested-by: Steev Klimaszewski <steev@kali.org> #Thinkpad X13s Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-01-15Bluetooth: Get rid of cmd_timeout and use the reset callbackHsin-chen Chuang
The hdev->reset is never used now and the hdev->cmd_timeout actually does reset. This patch changes the call path from hdev->cmd_timeout -> vendor_cmd_timeout -> btusb_reset -> hdev->reset , to hdev->reset -> vendor_reset -> btusb_reset Which makes it clear when we export the hdev->reset to a wider usage e.g. allowing reset from sysfs. This patch doesn't introduce any behavior change. Signed-off-by: Hsin-chen Chuang <chharry@chromium.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-01-15Bluetooth: Remove the cmd timeout count in btusbHsin-chen Chuang
Remove the cmd timeout count in btusb since we only ever allow one command in flight at a time. We should always reset after a single command times out. Signed-off-by: Hsin-chen Chuang <chharry@chromium.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-01-15Bluetooth: Use str_enable_disable-like helpersKrzysztof Kozlowski
Replace ternary (condition ? "enable" : "disable") syntax with helpers from string_choices.h because: 1. Simple function call with one argument is easier to read. Ternary operator has three arguments and with wrapping might lead to quite long code. 2. Is slightly shorter thus also easier to read. 3. It brings uniformity in the text - same string. 4. Allows deduping by the linker, which results in a smaller binary file. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-01-15Bluetooth: btmtk: Remove resetting mt7921 before downloading the fwHao Qin
Remove resetting mt7921 before downloading the fw, as it may cause command timeout when performing the reset. Signed-off-by: Hao Qin <hao.qin@mediatek.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-01-15Bluetooth: btusb: Add RTL8851BE device 13d3:3600Garrett Wilke
The information in /sys/kernel/debug/usb/devices about the Bluetooth device is listed as the below. T: Bus=07 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 1.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=13d3 ProdID=3600 Rev= 0.00 S: Manufacturer=Realtek S: Product=Bluetooth Radio S: SerialNumber=00e04c000001 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms Signed-off-by: Garrett Wilke <garrett@system76.com> Signed-off-by: Tim Crawford <tcrawford@system76.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-01-15Bluetooth: btusb: Add MT7921e device 13d3:3576Garrett Wilke
The information in /sys/kernel/debug/usb/devices about the Bluetooth device is listed as the below. T: Bus=01 Lev=01 Prnt=01 Port=04 Cnt=03 Dev#= 4 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=13d3 ProdID=3576 Rev= 1.00 S: Manufacturer=MediaTek Inc. S: Product=Wireless_Device S: SerialNumber=000000000 C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=100mA A: FirstIf#= 0 IfCount= 3 Cls=e0(wlcon) Sub=01 Prot=01 I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=125us E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=8a(I) Atr=03(Int.) MxPS= 64 Ivl=125us E: Ad=0a(O) Atr=03(Int.) MxPS= 64 Ivl=125us I: If#= 2 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=8a(I) Atr=03(Int.) MxPS= 512 Ivl=125us E: Ad=0a(O) Atr=03(Int.) MxPS= 512 Ivl=125us Signed-off-by: Garrett Wilke <garrett@system76.com> Signed-off-by: Tim Crawford <tcrawford@system76.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-01-15Bluetooth: btrtl: check for NULL in btrtl_setup_realtek()Max Chou
If insert an USB dongle which chip is not maintained in ic_id_table, it will hit the NULL point accessed. Add a null point check to avoid the Kernel Oops. Fixes: b39910bb54d9 ("Bluetooth: Populate hci_set_hw_info for Intel and Realtek") Reviewed-by: Alex Lu <alex_lu@realsil.com.cn> Signed-off-by: Max Chou <max.chou@realtek.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-01-15Bluetooth: btbcm: Fix NULL deref in btbcm_get_board_name()Charles Han
devm_kstrdup() can return a NULL pointer on failure,but this returned value in btbcm_get_board_name() is not checked. Add NULL check in btbcm_get_board_name(), to handle kernel NULL pointer dereference error. Fixes: f9183eaad915 ("Bluetooth: btbcm: Use devm_kstrdup()") Signed-off-by: Charles Han <hanchunchao@inspur.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-01-15Bluetooth: qca: Expand firmware-name to load specific rampatchCheng Jiang
The firmware-name property has been expanded to specify the names of NVM and rampatch firmware for certain chips, such as the QCA6698 Bluetooth chip. Although it shares the same IP core as the WCN6855, the QCA6698 has different RF components and RAM sizes, necessitating new firmware files. This change allows for the configuration of NVM and rampatch in DT. Possible configurations: firmware-name = QCA6698/hpnv21.bin, QCA6698/hpbtfw21.tlv; firmware-name = QCA6698/hpnv21, QCA6698/hpbtfw21.tlv; Signed-off-by: Cheng Jiang <quic_chejiang@quicinc.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-01-15Bluetooth: qca: Update firmware-name to support board specific nvmCheng Jiang
Different connectivity boards may be attached to the same platform. For example, QCA6698-based boards can support either a two-antenna or three-antenna solution, both of which work on the sa8775p-ride platform. Due to differences in connectivity boards and variations in RF performance from different foundries, different NVM configurations are used based on the board ID. Therefore, in the firmware-name property, if the NVM file has an extension, the NVM file will be used. Otherwise, the system will first try the .bNN (board ID) file, and if that fails, it will fall back to the .bin file. Possible configurations: firmware-name = "QCA6698/hpnv21"; firmware-name = "QCA6698/hpnv21.bin"; Signed-off-by: Cheng Jiang <quic_chejiang@quicinc.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-01-15Bluetooth: btusb: Add new VID/PID 13d3/3628 for MT7925En-Wei Wu
Add VID 13d3 & PID 3628 for MediaTek MT7925 USB Bluetooth chip. The information in /sys/kernel/debug/usb/devices about the Bluetooth device is listed as the below. T: Bus=01 Lev=01 Prnt=01 Port=03 Cnt=03 Dev#= 4 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=13d3 ProdID=3628 Rev= 1.00 S: Manufacturer=MediaTek Inc. S: Product=Wireless_Device S: SerialNumber=000000000 C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=100mA A: FirstIf#= 0 IfCount= 3 Cls=e0(wlcon) Sub=01 Prot=01 I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=125us E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms I: If#= 2 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=8a(I) Atr=03(Int.) MxPS= 64 Ivl=125us E: Ad=0a(O) Atr=03(Int.) MxPS= 64 Ivl=125us I:* If#= 2 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=8a(I) Atr=03(Int.) MxPS= 512 Ivl=125us E: Ad=0a(O) Atr=03(Int.) MxPS= 512 Ivl=125us Signed-off-by: En-Wei Wu <en-wei.wu@canonical.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-01-15Bluetooth: btusb: Add new VID/PID 13d3/3610 for MT7922Andrew Halaney
A new machine has a Archer AX3000 / TX55e in it, and out the box reported issues resetting hci0. It looks like this is a MT7922 from the lspci output, so treat it as a MediaTek device and use the proper callbacks. With that in place an xbox controller can be used without issue as seen below: [ 7.047388] Bluetooth: hci0: HW/SW Version: 0x008a008a, Build Time: 20241106163512 [ 9.583883] Bluetooth: hci0: Device setup in 2582842 usecs [ 9.583895] Bluetooth: hci0: HCI Enhanced Setup Synchronous Connection command is advertised, but not supported. [ 9.644780] Bluetooth: hci0: AOSP extensions version v1.00 [ 9.644784] Bluetooth: hci0: AOSP quality report is supported [ 876.379876] input: Xbox Wireless Controller as /devices/virtual/misc/uhid/0005:045E:0B13.0006/input/input27 [ 876.380215] hid-generic 0005:045E:0B13.0006: input,hidraw3: BLUETOOTH HID v5.15 Gamepad [Xbox Wireless Controller] on c0:bf:be:27:de:f7 [ 876.429368] input: Xbox Wireless Controller as /devices/virtual/misc/uhid/0005:045E:0B13.0006/input/input28 [ 876.429423] microsoft 0005:045E:0B13.0006: input,hidraw3: BLUETOOTH HID v5.15 Gamepad [Xbox Wireless Controller] on c0:bf:be:27:de:f7 lspci output: root@livingroom:/home/ajhalaney/git# lspci ... 05:00.0 Network controller: MEDIATEK Corp. MT7922 802.11ax PCI Express Wireless Network Adapter and USB device: root@livingroom:/home/ajhalaney/git# cat /sys/kernel/debug/usb/devices ... T: Bus=01 Lev=01 Prnt=01 Port=10 Cnt=03 Dev#= 4 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=13d3 ProdID=3610 Rev= 1.00 S: Manufacturer=MediaTek Inc. S: Product=Wireless_Device S: SerialNumber=000000000 C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=100mA A: FirstIf#= 0 IfCount= 3 Cls=e0(wlcon) Sub=01 Prot=01 I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=125us E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms I: If#= 2 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=8a(I) Atr=03(Int.) MxPS= 64 Ivl=125us E: Ad=0a(O) Atr=03(Int.) MxPS= 64 Ivl=125us I:* If#= 2 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=8a(I) Atr=03(Int.) MxPS= 512 Ivl=125us E: Ad=0a(O) Atr=03(Int.) MxPS= 512 Ivl=125us Signed-off-by: Andrew Halaney <ajhalaney@gmail.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-01-15Bluetooth: btusb: add sysfs attribute to control USB alt settingYing Hsu
When a Bluetooth raw socket is open, the HCI event related to SCO connection changes are not dispatched to the hci_event module, and the underlying Bluetooth controller's USB Interface 1 will not be updated accordingly. This patch adds `isoc_alt` sysfs attribute, allowing user space to update the alternate setting of the USB interface alternate setting as needed. Signed-off-by: Ying Hsu <yinghsu@chromium.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-01-15Bluetooth: btusb: Add ID 0x2c7c:0x0130 for Qualcomm WCN785xMark Dietzer
Adds a new entry with VID 0x2c7c and PID 0x0130 to the btusb quirks table as it uses a Qualcomm WCN785x chipset The device information from /sys/kernel/debug/usb/devices is provided below: T: Bus=01 Lev=01 Prnt=01 Port=04 Cnt=05 Dev#= 7 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=0130 Rev= 0.01 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms I: If#= 1 Alt= 7 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 65 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 65 Ivl=1ms Signed-off-by: Mark Dietzer <git@doridian.net> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-01-15Merge tag 'mt76-for-kvalo-2025-01-14' of https://github.com/nbd168/wirelessKalle Valo
mt76 patches for 6.14 - mlo fixes for mt792x - single wiphy multiband support for mt7996 - mt7915 stability fixes
2025-01-15Merge tag 'rtw-next-2025-01-12' of https://github.com/pkshih/rtwKalle Valo
rtw-next patches for v6.14 rtl8xxxu, rtlwifi and rtw88 fix field issues reported by users. rtw89 is ongoing to implement MLO and fix issues during the development. Major changes: rtw88: - support LED blinking rtw89: - support RTL8922AE-VS chip
2025-01-15hwmon: (drivetemp) Set scsi command timeout to 10sRussell Harmon
There's at least one drive (MaxDigitalData OOS14000G) such that if it receives a large amount of I/O while entering an idle power state will first exit idle before responding, including causing SMART temperature requests to be delayed. This causes the drivetemp request to exceed its timeout of 1 second. Signed-off-by: Russell Harmon <russ@har.mn> Link: https://lore.kernel.org/r/20250115131340.3178988-1-russ@har.mn Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2025-01-15hwmon: (acpi_power_meter) Fix a check for the return value of ↵Kazuhiro Abe
read_domain_devices(). After commit fabb1f813ec0 ("hwmon: (acpi_power_meter) Fix fail to load module on platform without _PMD method"), the acpi_power_meter driver fails to load if the platform has _PMD method. To address this, add a check for successful read_domain_devices(). Tested on Nvidia Grace machine. Fixes: fabb1f813ec0 ("hwmon: (acpi_power_meter) Fix fail to load module on platform without _PMD method") Signed-off-by: Kazuhiro Abe <fj1078ii@aa.jp.fujitsu.com> Link: https://lore.kernel.org/r/20250115073532.3211000-1-fj1078ii@aa.jp.fujitsu.com [groeck: Dropped unnecessary () from expression] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2025-01-15Merge tag 'reset-fixes-for-v6.13' of git://git.pengutronix.de/pza/linux into ↵Arnd Bergmann
arm/fixes Reset controller fixes for v6.13 * Fix rzg2l-usb-vbus-regulator lookup by assigning the proper of node to the allocated platform device in the rzg2l-usbphy-ctrl driver. * tag 'reset-fixes-for-v6.13' of git://git.pengutronix.de/pza/linux: reset: rzg2l-usbphy-ctrl: Assign proper of node to the allocated device Link: https://lore.kernel.org/r/20250113163642.1757160-1-p.zabel@pengutronix.de Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-01-15s390/diag: Add memory topology information via diag310Mete Durlu
Introduce diag310 and memory topology related subcodes. Provide memory topology information obtanied from diag310 to userspace via diag ioctl. Signed-off-by: Mete Durlu <meted@linux.ibm.com> Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
2025-01-15drm/xe/oa: Add missing VISACTL mux registersAshutosh Dixit
Add missing VISACTL mux registers required for some OA config's (e.g. RenderPipeCtrl). Fixes: cdf02fe1a94a ("drm/xe/oa/uapi: Add/remove OA config perf ops") Cc: stable@vger.kernel.org Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com> Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250111021539.2920346-1-ashutosh.dixit@intel.com (cherry picked from commit c26f22dac3449d8a687237cdfc59a6445eb8f75a) Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
2025-01-15drm/xe: make change ccs_mode a synchronous actionMaciej Patelczyk
If ccs_mode is being modified via /sys/class/drm/cardX/device/tileY/gtY/ccs_mode the asynchronous reset is triggered and the write returns immediately. With that some test receive false information about number of CCS engines or even fail if they proceed without delay after changing the ccs_mode. Changing the ccs_mode change from async to sync to prevent failures in tests. Signed-off-by: Maciej Patelczyk <maciej.patelczyk@intel.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Fixes: f3bc5bb4d53d ("drm/xe: Allow userspace to configure CCS mode") Reviewed-by: Nirmoy Das <nirmoy.das@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241211111727.1481476-3-maciej.patelczyk@intel.com Signed-off-by: Nirmoy Das <nirmoy.das@intel.com> (cherry picked from commit 480fb9806e2e073532f7786166287114c696b340) Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
2025-01-15drm/xe: introduce xe_gt_reset and xe_gt_wait_for_resetMaciej Patelczyk
Add synchronous version gt reset as there are few places where it is expected. Also add a wait helper to wait until gt reset is done. Signed-off-by: Maciej Patelczyk <maciej.patelczyk@intel.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Fixes: f3bc5bb4d53d ("drm/xe: Allow userspace to configure CCS mode") Reviewed-by: Nirmoy Das <nirmoy.das@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241211111727.1481476-2-maciej.patelczyk@intel.com Signed-off-by: Nirmoy Das <nirmoy.das@intel.com> (cherry picked from commit 155c77f45f63dd58a37eeb0896b0b140ab785836) Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
2025-01-15drm/xe/guc: Adding steering info support for GuC register listsJesus Narvaez
The guc_mmio_reg interface supports steering, but it is currently not implemented. This will allow the GuC to control steering of MMIO registers after save-restore and avoid reading from fused off MCR register instances. Fixes: 9c57bc08652a ("drm/xe/lnl: Drop force_probe requirement") Signed-off-by: Jesus Narvaez <jesus.narvaez@intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com> Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241212190100.3768068-1-jesus.narvaez@intel.com (cherry picked from commit ee5a1321df90891d59d83b7c9d5b6c5b755d059d) Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
2025-01-15irqchip: Plug a OF node reference leak in platform_irqchip_probe()Joe Hattori
platform_irqchip_probe() leaks a OF node when irq_init_cb() fails. Fix it by declaring par_np with the __free(device_node) cleanup construct. This bug was found by an experimental static analysis tool that I am developing. Fixes: f8410e626569 ("irqchip: Add IRQCHIP_PLATFORM_DRIVER_BEGIN/END and IRQCHIP_MATCH helper macros") Signed-off-by: Joe Hattori <joe@pf.is.s.u-tokyo.ac.jp> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/all/20241215033945.3414223-1-joe@pf.is.s.u-tokyo.ac.jp
2025-01-15irqchip/loongarch-avec: Add multi-nodes topology supportTianyang Zhang
avecintc_init() enables the Advanced Interrupt Controller (AVEC) of the boot CPU node, but nothing enables the AVEC on secondary nodes. Move the enablement to the CPU hotplug callback so that secondary nodes get the AVEC enabled too. In theory enabling it once per node would be sufficient, but redundant enabling does no hurt, so keep the code simple and do it unconditionally. Signed-off-by: Tianyang Zhang <zhangtianyang@loongson.cn> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Huacai Chen <chenhuacai@loongson.cn> Link: https://lore.kernel.org/all/20250111023704.17285-1-zhangtianyang@loongson.cn
2025-01-15irqchip/ts4800: Replace seq_printf() by seq_puts()Geert Uytterhoeven
Simplify "seq_printf(p, "%s", ...)" to "seq_puts(p, ...)". Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/all/1ba5692126804f9e1ff062ac24939b24030b4f72.1733403985.git.geert+renesas@glider.be
2025-01-15irqchip/ti-sci-inta : Add module build supportNicolas Frayer
Add module build support in Kconfig for the TI SCI interrupt aggregator driver. The driver's default build is built-in and it also depends on ARCH_K3 as the driver uses some 64 bit ops and should only be built for 64-bit platforms. Signed-off-by: Nicolas Frayer <nfrayer@baylibre.com> Signed-off-by: Guillaume La Roque <glaroque@baylibre.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Nishanth Menon <nm@ti.com> Link: https://lore.kernel.org/all/20241224-timodules-v4-2-c5e010f58e2c@baylibre.com
2025-01-15irqchip/ti-sci-intr: Add module build supportNicolas Frayer
Add module build support in Kconfig for the TI SCI interrupt router driver. This driver depends on the TI sci firmware driver which aready supports module build. Signed-off-by: Nicolas Frayer <nfrayer@baylibre.com> Signed-off-by: Guillaume La Roque <glaroque@baylibre.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Nishanth Menon <nm@ti.com> Link: https://lore.kernel.org/all/20241224-timodules-v4-1-c5e010f58e2c@baylibre.com
2025-01-15irqchip/irq-brcmstb-l2: Replace brcmstb_l2_mask_and_ack() by generic functionDr. David Alan Gilbert
Replace brcmstb_l2_mask_and_ack() by the generic irq_gc_mask_disable_and_ack_set(). brcmstb_l2_mask_and_ack() was added in commit 49aa6ef0b439 ("irqchip/brcmstb-l2: Remove some processing from the handler") in September 2017 with a comment saying it was actually generic and someone should add it to the generic code. commit 20608924cc2e ("genirq: generic chip: Add irq_gc_mask_disable_and_ack_set()") did that a few weeks later, however no one went back and took the brcmstb variant out. Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/all/20241224001727.149337-1-linux@treblig.org
2025-01-15irqchip: keystone: Use syscon_regmap_lookup_by_phandle_argsKrzysztof Kozlowski
Use syscon_regmap_lookup_by_phandle_args() which is a wrapper over syscon_regmap_lookup_by_phandle() combined with getting the syscon argument. Except simpler code this annotates within one line that given phandle has arguments, so grepping for code would be easier. There is also no real benefit in printing errors on missing syscon argument, because this is done just too late: runtime check on static/build-time data. Dtschema and Devicetree bindings offer the static/build-time check for this already. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/all/20250111185414.183971-1-krzysztof.kozlowski@linaro.org
2025-01-15irqchip/sunxi-nmi: Add missing SKIP_WAKE flagPhilippe Simons
Some boards with Allwinner SoCs connect the PMIC's IRQ pin to the SoC's NMI pin instead of a normal GPIO. Since the power key is connected to the PMIC, and people expect to wake up a suspended system via this key, the NMI IRQ controller must stay alive when the system goes into suspend. Add the SKIP_WAKE flag to prevent the sunxi NMI controller from going to sleep, so that the power key can wake up those systems. [ tglx: Fixed up coding style ] Signed-off-by: Philippe Simons <simons.philippe@gmail.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/all/20250112123402.388520-1-simons.philippe@gmail.com
2025-01-15irqchip/gic-v3-its: Don't enable interrupts in its_irq_set_vcpu_affinity()Tomas Krcka
The following call-chain leads to enabling interrupts in a nested interrupt disabled section: irq_set_vcpu_affinity() irq_get_desc_lock() raw_spin_lock_irqsave() <--- Disable interrupts its_irq_set_vcpu_affinity() guard(raw_spinlock_irq) <--- Enables interrupts when leaving the guard() irq_put_desc_unlock() <--- Warns because interrupts are enabled This was broken in commit b97e8a2f7130, which replaced the original raw_spin_[un]lock() pair with guard(raw_spinlock_irq). Fix the issue by using guard(raw_spinlock). [ tglx: Massaged change log ] Fixes: b97e8a2f7130 ("irqchip/gic-v3-its: Fix potential race condition in its_vlpi_prop_update()") Signed-off-by: Tomas Krcka <krckatom@amazon.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Marc Zyngier <maz@kernel.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/all/20241230150825.62894-1-krckatom@amazon.de
2025-01-15irqchip/gic-v3: Handle CPU_PM_ENTER_FAILED correctlyYogesh Lal
When a CPU attempts to enter low power mode, it disables the redistributor and Group 1 interrupts and reinitializes the system registers upon wakeup. If the transition into low power mode fails, then the CPU_PM framework invokes the PM notifier callback with CPU_PM_ENTER_FAILED to allow the drivers to undo the state changes. The GIC V3 driver ignores CPU_PM_ENTER_FAILED, which leaves the GIC in disabled state. Handle CPU_PM_ENTER_FAILED in the same way as CPU_PM_EXIT to restore normal operation. [ tglx: Massage change log, add Fixes tag ] Fixes: 3708d52fc6bb ("irqchip: gic-v3: Implement CPU PM notifier") Signed-off-by: Yogesh Lal <quic_ylal@quicinc.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Marc Zyngier <maz@kernel.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/all/20241220093907.2747601-1-quic_ylal@quicinc.com
2025-01-15drm/bridge: ite-it6263: Prevent error pointer dereference in probe()Dan Carpenter
If devm_i2c_new_dummy_device() fails then we were supposed to return an error code, but instead the function continues and will crash on the next line. Add the missing return statement. Fixes: 049723628716 ("drm/bridge: Add ITE IT6263 LVDS to HDMI converter") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Liu Ying <victor.liu@nxp.com> Signed-off-by: Liu Ying <victor.liu@nxp.com> Link: https://patchwork.freedesktop.org/patch/msgid/804a758b-f2e7-4116-b72d-29bc8905beed@stanley.mountain
2025-01-14net: fec: handle page_pool_dev_alloc_pages errorKevin Groeneveld
The fec_enet_update_cbd function calls page_pool_dev_alloc_pages but did not handle the case when it returned NULL. There was a WARN_ON(!new_page) but it would still proceed to use the NULL pointer and then crash. This case does seem somewhat rare but when the system is under memory pressure it can happen. One case where I can duplicate this with some frequency is when writing over a smbd share to a SATA HDD attached to an imx6q. Setting /proc/sys/vm/min_free_kbytes to higher values also seems to solve the problem for my test case. But it still seems wrong that the fec driver ignores the memory allocation error and can crash. This commit handles the allocation error by dropping the current packet. Fixes: 95698ff6177b5 ("net: fec: using page pool to manage RX buffers") Signed-off-by: Kevin Groeneveld <kgroeneveld@lenbrook.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Wei Fang <wei.fang@nxp.com> Link: https://patch.msgid.link/20250113154846.1765414-1-kgroeneveld@lenbrook.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-14net: stmmac: restart LPI timer after cleaning transmit descriptorsRussell King (Oracle)
Fix a bug in the LPI handling, where it is possible to immediately enter LPI mode after cleaning the transmit descriptors when all queues are empty rather than waiting for the LPI timeout to expire. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://patch.msgid.link/E1tXItg-000MBg-TW@rmk-PC.armlinux.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-14net: stmmac: combine stmmac_enable_eee_mode()Russell King (Oracle)
Combine stmmac_enable_eee_mode() with stmmac_try_to_start_sw_lpi() which makes the code easier to read and the flow more logical. We can now trivially see that if the transmit queues are busy, we (re-)start the eee_ctrl_timer. Otherwise, if the transmit path is not already in LPI mode, we ask the hardware to enter LPI mode. I believe that now we can see better what is going on here, this shows that there is a bug with the software LPI timer implementation. The LPI timer is supposed to define how long after the last transmittion completed before we start signalling LPI. However, this code structure shows that if all transmit queues are empty, and stmmac_try_to_start_sw_lpi() is called immediately after cleaning the transmit queue, we will instruct the hardware to start signalling LPI immediately. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://patch.msgid.link/E1tXItb-000MBa-OU@rmk-PC.armlinux.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-14net: stmmac: provide function for restarting sw LPI timerRussell King (Oracle)
Provide a function that encapsulates restarting the software LPI timer when we have determined that the transmit path is busy, or whether the EEE parameters have changed. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://patch.msgid.link/E1tXItW-000MBU-KQ@rmk-PC.armlinux.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-14net: stmmac: provide stmmac_eee_tx_busy()Russell King (Oracle)
Extract the code which checks whether there's still work to do on any of the stmmac transmit queues. This will allow us to combine stmmac_enable_eee_mode() with stmmac_try_to_start_sw_lpi() in the next patch. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://patch.msgid.link/E1tXItR-000MBO-GF@rmk-PC.armlinux.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-14net: stmmac: add stmmac_try_to_start_sw_lpi()Russell King (Oracle)
There are two places which call stmmac_enable_eee_mode() and follow it immediately by modifying the expiry of priv->eee_ctrl_timer. Both code paths are trying to enable LPI mode. Remove this duplication by providing a function for this. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://patch.msgid.link/E1tXItM-000MBI-CX@rmk-PC.armlinux.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-14net: stmmac: check priv->eee_sw_timer_en in suspend pathRussell King (Oracle)
The suspend path uses priv->eee_enabled when cleaning up the software timed LPI mode. Use priv->eee_sw_timer_en instead so we're consistently using a single control for software-based timer handling. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://patch.msgid.link/E1tXItH-000MBC-8i@rmk-PC.armlinux.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-14net: stmmac: simplify TX cleanup decision for ending sw LPI modeRussell King (Oracle)
As mentioned in "net: stmmac: correct priv->eee_sw_timer_en setting", we can simplify some fast-path tests. The transmit cleaning path checks whether EEE is enabled, the transmit path is not in LPI mode, and that we're using software timed mode. Since the above mentioned commit, checking whether EEE is enabled is no longer necessary as priv->eee_sw_timer_en will be false when EEE is disabled. Simplify this test. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://patch.msgid.link/E1tXItC-000MB6-54@rmk-PC.armlinux.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-14net: stmmac: correct priv->eee_sw_timer_en settingRussell King (Oracle)
If we are disabling EEE/LPI, then we should not be enabling software mode. The only time when we should is if EEE is active, and we are wanting to use software-timed EEE mode. Therefore, in the disable path of stmmac_eee_init(), ensure that priv->eee_sw_timer_en is set false as we are going to be calling del_timer_sync() on the timer. This will allow us to simplify some fast-path tests in later patches. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://patch.msgid.link/E1tXIt7-000MB0-0W@rmk-PC.armlinux.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-14net: stmmac: rename stmmac_disable_sw_eee_mode()Russell King (Oracle)
stmmac_disable_sw_eee_mode() was not a good choice for this functions purpose - which is to stop transmitting LPI because we want to send a packet. Rename it to stmmac_stop_sw_lpi(). Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://patch.msgid.link/E1tXIt1-000MAu-TE@rmk-PC.armlinux.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-14net: ethernet: sunplus: Switch to ndo_eth_ioctl谢致邦 (XIE Zhibang)
The device ioctl handler no longer calls ndo_do_ioctl, but calls ndo_eth_ioctl to handle mii ioctls since commit a76053707dbf ("dev_ioctl: split out ndo_eth_ioctl"). However, sunplus still used ndo_do_ioctl when it was introduced. So switch to ndo_eth_ioctl. Bad commit fd3040b9394c ("net: ethernet: Add driver for Sunplus SP7021") was the initial driver commit, meaning that PHY IOCTLs where never available on this driver. Therefore don't consider this as a fix. Found by code inspection. Signed-off-by: 谢致邦 (XIE Zhibang) <Yeking@Red54.com> Link: https://patch.msgid.link/tencent_8CF8A72C708E96B9C7DC1AF96FEE19AF3D05@qq.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-14net: stmmac: stm32: Use syscon_regmap_lookup_by_phandle_argsKrzysztof Kozlowski
Use syscon_regmap_lookup_by_phandle_args() which is a wrapper over syscon_regmap_lookup_by_phandle() combined with getting the syscon argument. Except simpler code this annotates within one line that given phandle has arguments, so grepping for code would be easier. There is also no real benefit in printing errors on missing syscon argument, because this is done just too late: runtime check on static/build-time data. Dtschema and Devicetree bindings offer the static/build-time check for this already. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://patch.msgid.link/20250112-syscon-phandle-args-net-v1-5-3423889935f7@linaro.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-14net: stmmac: sti: Use syscon_regmap_lookup_by_phandle_argsKrzysztof Kozlowski
Use syscon_regmap_lookup_by_phandle_args() which is a wrapper over syscon_regmap_lookup_by_phandle() combined with getting the syscon argument. Except simpler code this annotates within one line that given phandle has arguments, so grepping for code would be easier. There is also no real benefit in printing errors on missing syscon argument, because this is done just too late: runtime check on static/build-time data. Dtschema and Devicetree bindings offer the static/build-time check for this already. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://patch.msgid.link/20250112-syscon-phandle-args-net-v1-4-3423889935f7@linaro.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-14net: stmmac: imx: Use syscon_regmap_lookup_by_phandle_argsKrzysztof Kozlowski
Use syscon_regmap_lookup_by_phandle_args() which is a wrapper over syscon_regmap_lookup_by_phandle() combined with getting the syscon argument. Except simpler code this annotates within one line that given phandle has arguments, so grepping for code would be easier. There is also no real benefit in printing errors on missing syscon argument, because this is done just too late: runtime check on static/build-time data. Dtschema and Devicetree bindings offer the static/build-time check for this already. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://patch.msgid.link/20250112-syscon-phandle-args-net-v1-3-3423889935f7@linaro.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
generated by cgit (git 2.34.1) at 2025-09-11 07:04:44 +0000