| Age | Commit message (Collapse) | Author |
|---|
|
The nvme_poll_cq() function currently returns the number of CQEs
found, However, only one caller, nvme_poll(), requires a boolean
value to check whether any CQE was completed. The other callers do
not use the return value at all.
To better reflect its usage, update the return type of nvme_poll_cq()
from int to bool.
Signed-off-by: Yongsoo Joo <ysjoo@kookmin.ac.kr>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
The xa_store() may fail due to memory allocation failure because there
is no guarantee that the index csi is already used. This fix adds an
error check of the return value of xa_store() in nvme_get_effects_log().
Fixes: 1cf7a12e09aa ("nvme: use an xarray to lookup the Commands Supported and Effects log")
Signed-off-by: Keisuke Nishimura <keisuke.nishimura@inria.fr>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
Since day-1 we are assigning the queue io_cpu very naively. We always
base the queue id (controller scope) and assign it its matching cpu
from the online mask. This works fine when the number of queues match
the number of cpu cores.
The problem starts when we have less queues than cpu cores. First, we
should take into account the mq_map and select a cpu within the cpus
that are assigned to this queue by the mq_map in order to minimize cross
numa cpu bouncing.
Second, even worse is that we don't take into account multiple
controllers may have assigned queues to a given cpu. As a result we may
simply compund more and more queues on the same set of cpus, which is
suboptimal.
We fix this by introducing global per-cpu counters that tracks the
number of queues assigned to each cpu, and we select the least used cpu
based on the mq_map and the per-cpu counters, and assign it as the queue
io_cpu.
The behavior for a single controller is slightly optimized by selecting
better cpu candidates by consulting with the mq_map, and multiple
controllers are spreading queues among cpu cores much better, resulting
in lower average cpu load, and less likelihood to hit hotspots.
Note that the accounting is not 100% perfect, but we don't need to be,
we're simply putting our best effort to select the best candidate cpu
core that we find at any given point.
Another byproduct is that every controller reset/reconnect may change
the queues io_cpu mapping, based on the current LRU accounting scheme.
Here is the baseline queue io_cpu assignment for 4 controllers, 2 queues
per controller, and 4 cpus on the host:
nvme1: queue 0: using cpu 0
nvme1: queue 1: using cpu 1
nvme2: queue 0: using cpu 0
nvme2: queue 1: using cpu 1
nvme3: queue 0: using cpu 0
nvme3: queue 1: using cpu 1
nvme4: queue 0: using cpu 0
nvme4: queue 1: using cpu 1
And this is the fixed io_cpu assignment:
nvme1: queue 0: using cpu 0
nvme1: queue 1: using cpu 2
nvme2: queue 0: using cpu 1
nvme2: queue 1: using cpu 3
nvme3: queue 0: using cpu 0
nvme3: queue 1: using cpu 2
nvme4: queue 0: using cpu 1
nvme4: queue 1: using cpu 3
Fixes: 3f2304f8c6d6 ("nvme-tcp: add NVMe over TCP host driver")
Suggested-by: Hannes Reinecke <hare@kernel.org>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
[fixed kbuild reported errors]
Signed-off-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
In all 3 cases (cpsw, cpsw-new, am65-cpsw) ALE is being configured in
VLAN-aware mode, while the comment states the opposite. Seems to be a typo
copy-pasted from one driver to another. Fix the commend which has been
puzzling some people (including me) for at least a decade.
Link: https://lore.kernel.org/linux-arm-kernel/4699400.vD3TdgH1nR@localhost/
Link: https://lore.kernel.org/netdev/0106ce78-c83f-4552-a234-1bf7a33f1ed1@kernel.org/
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@siemens.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250109214219.123767-1-alexander.sverdlin@siemens.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When tx_max_frame_size was added to struct ravb_hw_info, no value was
set in ravb_rzv2m_hw_info so the default value of zero was used.
The maximum MTU is set by subtracting from tx_max_frame_size to allow
space for headers and frame checksums. As ndev->max_mtu is unsigned,
this subtraction wraps around leading to a ridiculously large positive
value that is obviously incorrect.
Before tx_max_frame_size was introduced, the maximum MTU was based on
rx_max_frame_size. So, we can restore the correct maximum MTU by copying
the rx_max_frame_size value into tx_max_frame_size for RZ/V2M.
Fixes: 1d63864299ca ("net: ravb: Fix maximum TX frame size for GbEth devices")
Signed-off-by: Paul Barker <paul.barker.ct@bp.renesas.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Link: https://patch.msgid.link/20250109113706.1409149-1-paul.barker.ct@bp.renesas.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In mana_driver_exit(), mana_debugfs_root gets cleanup before any of it's
children (which happens later in the pci_unregister_driver()).
Due to this, when mana driver is configured as a module and rmmod is
invoked, following stack gets printed along with failure in rmmod command.
[ 2399.317651] BUG: kernel NULL pointer dereference, address: 0000000000000098
[ 2399.318657] #PF: supervisor write access in kernel mode
[ 2399.319057] #PF: error_code(0x0002) - not-present page
[ 2399.319528] PGD 10eb68067 P4D 0
[ 2399.319914] Oops: Oops: 0002 [#1] SMP NOPTI
[ 2399.320308] CPU: 72 UID: 0 PID: 5815 Comm: rmmod Not tainted 6.13.0-rc5+ #89
[ 2399.320986] Hardware name: Microsoft Corporation Virtual Machine/Virtual Machine, BIOS Hyper-V UEFI Release v4.1 09/28/2024
[ 2399.321892] RIP: 0010:down_write+0x1a/0x50
[ 2399.322303] Code: 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 0f 1f 44 00 00 55 48 89 e5 41 54 49 89 fc e8 9d cd ff ff 31 c0 ba 01 00 00 00 <f0> 49 0f b1 14 24 75 17 65 48 8b 05 f6 84 dd 5f 49 89 44 24 08 4c
[ 2399.323669] RSP: 0018:ff53859d6c663a70 EFLAGS: 00010246
[ 2399.324061] RAX: 0000000000000000 RBX: ff1d4eb505060180 RCX: ffffff8100000000
[ 2399.324620] RDX: 0000000000000001 RSI: 0000000000000064 RDI: 0000000000000098
[ 2399.325167] RBP: ff53859d6c663a78 R08: 00000000000009c4 R09: ff1d4eb4fac90000
[ 2399.325681] R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000098
[ 2399.326185] R13: ff1d4e42e1a4a0c8 R14: ff1d4eb538ce0000 R15: 0000000000000098
[ 2399.326755] FS: 00007fe729570000(0000) GS:ff1d4eb2b7200000(0000) knlGS:0000000000000000
[ 2399.327269] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 2399.327690] CR2: 0000000000000098 CR3: 00000001c0584005 CR4: 0000000000373ef0
[ 2399.328166] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 2399.328623] DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000400
[ 2399.329055] Call Trace:
[ 2399.329243] <TASK>
[ 2399.329379] ? show_regs+0x69/0x80
[ 2399.329602] ? __die+0x25/0x70
[ 2399.329856] ? page_fault_oops+0x271/0x550
[ 2399.330088] ? psi_group_change+0x217/0x470
[ 2399.330341] ? do_user_addr_fault+0x455/0x7b0
[ 2399.330667] ? finish_task_switch.isra.0+0x91/0x2f0
[ 2399.331004] ? exc_page_fault+0x73/0x160
[ 2399.331275] ? asm_exc_page_fault+0x27/0x30
[ 2399.343324] ? down_write+0x1a/0x50
[ 2399.343631] simple_recursive_removal+0x4d/0x2c0
[ 2399.343977] ? __pfx_remove_one+0x10/0x10
[ 2399.344251] debugfs_remove+0x45/0x70
[ 2399.344511] mana_destroy_rxq+0x44/0x400 [mana]
[ 2399.344845] mana_destroy_vport+0x54/0x1c0 [mana]
[ 2399.345229] mana_detach+0x2f1/0x4e0 [mana]
[ 2399.345466] ? ida_free+0x150/0x160
[ 2399.345718] ? __cond_resched+0x1a/0x50
[ 2399.345987] mana_remove+0xf4/0x1a0 [mana]
[ 2399.346243] mana_gd_remove+0x25/0x80 [mana]
[ 2399.346605] pci_device_remove+0x41/0xb0
[ 2399.346878] device_remove+0x46/0x70
[ 2399.347150] device_release_driver_internal+0x1e3/0x250
[ 2399.347831] ? klist_remove+0x81/0xe0
[ 2399.348377] driver_detach+0x4b/0xa0
[ 2399.348906] bus_remove_driver+0x83/0x100
[ 2399.349435] driver_unregister+0x31/0x60
[ 2399.349919] pci_unregister_driver+0x40/0x90
[ 2399.350492] mana_driver_exit+0x1c/0xb50 [mana]
[ 2399.351102] __do_sys_delete_module.constprop.0+0x184/0x320
[ 2399.351664] ? __fput+0x1a9/0x2d0
[ 2399.352200] __x64_sys_delete_module+0x12/0x20
[ 2399.352760] x64_sys_call+0x1e66/0x2140
[ 2399.353316] do_syscall_64+0x79/0x150
[ 2399.353813] ? syscall_exit_to_user_mode+0x49/0x230
[ 2399.354346] ? do_syscall_64+0x85/0x150
[ 2399.354816] ? irqentry_exit+0x1d/0x30
[ 2399.355287] ? exc_page_fault+0x7f/0x160
[ 2399.355756] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[ 2399.356302] RIP: 0033:0x7fe728d26aeb
[ 2399.356776] Code: 73 01 c3 48 8b 0d 45 33 0f 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa b8 b0 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 15 33 0f 00 f7 d8 64 89 01 48
[ 2399.358372] RSP: 002b:00007ffff954d6f8 EFLAGS: 00000206 ORIG_RAX: 00000000000000b0
[ 2399.359066] RAX: ffffffffffffffda RBX: 00005609156cc760 RCX: 00007fe728d26aeb
[ 2399.359779] RDX: 000000000000000a RSI: 0000000000000800 RDI: 00005609156cc7c8
[ 2399.360535] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000
[ 2399.361261] R10: 00007fe728dbeac0 R11: 0000000000000206 R12: 00007ffff954d950
[ 2399.361952] R13: 00005609156cc2a0 R14: 00007ffff954ee5f R15: 00005609156cc760
[ 2399.362688] </TASK>
Fixes: 6607c17c6c5e ("net: mana: Enable debugfs files for MANA device")
Cc: stable@vger.kernel.org
Signed-off-by: Shradha Gupta <shradhagupta@linux.microsoft.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Link: https://patch.msgid.link/1736398991-764-1-git-send-email-shradhagupta@linux.microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This allows ipvlan to function properly on top of
bonds using active-backup mode.
This was implemented for macvlan in 2014 in commit
4c9912556867 ("macvlan: Support bonding events").
Signed-off-by: Etienne Champetier <champetier.etienne@gmail.com>
Link: https://patch.msgid.link/20250109032819.326528-2-champetier.etienne@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Recalculate features when XDP is detached.
Before:
# ip li set dev eth0 xdp obj xdp_dummy.bpf.o sec xdp
# ip li set dev eth0 xdp off
# ethtool -k eth0 | grep gro
rx-gro-hw: off [requested on]
After:
# ip li set dev eth0 xdp obj xdp_dummy.bpf.o sec xdp
# ip li set dev eth0 xdp off
# ethtool -k eth0 | grep gro
rx-gro-hw: on
The fact that HW-GRO doesn't get re-enabled automatically is just
a minor annoyance. The real issue is that the features will randomly
come back during another reconfiguration which just happens to invoke
netdev_update_features(). The driver doesn't handle reconfiguring
two things at a time very robustly.
Starting with commit 98ba1d931f61 ("bnxt_en: Fix RSS logic in
__bnxt_reserve_rings()") we only reconfigure the RSS hash table
if the "effective" number of Rx rings has changed. If HW-GRO is
enabled "effective" number of rings is 2x what user sees.
So if we are in the bad state, with HW-GRO re-enablement "pending"
after XDP off, and we lower the rings by / 2 - the HW-GRO rings
doing 2x and the ethtool -L doing / 2 may cancel each other out,
and the:
if (old_rx_rings != bp->hw_resc.resv_rx_rings &&
condition in __bnxt_reserve_rings() will be false.
The RSS map won't get updated, and we'll crash with:
BUG: kernel NULL pointer dereference, address: 0000000000000168
RIP: 0010:__bnxt_hwrm_vnic_set_rss+0x13a/0x1a0
bnxt_hwrm_vnic_rss_cfg_p5+0x47/0x180
__bnxt_setup_vnic_p5+0x58/0x110
bnxt_init_nic+0xb72/0xf50
__bnxt_open_nic+0x40d/0xab0
bnxt_open_nic+0x2b/0x60
ethtool_set_channels+0x18c/0x1d0
As we try to access a freed ring.
The issue is present since XDP support was added, really, but
prior to commit 98ba1d931f61 ("bnxt_en: Fix RSS logic in
__bnxt_reserve_rings()") it wasn't causing major issues.
Fixes: 1054aee82321 ("bnxt_en: Use NETIF_F_GRO_HW.")
Fixes: 98ba1d931f61 ("bnxt_en: Fix RSS logic in __bnxt_reserve_rings()")
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Link: https://patch.msgid.link/20250109043057.2888953-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Remove stmmac_lpi_entry_timer_config(), setting priv->eee_sw_timer_en
at the original call sites, and calling the appropriate
stmmac_xxx_hw_lpi_timer() function. No functional change.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Choong Yong Liang <yong.liang.choong@linux.intel.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1tVZEq-0002LQ-PC@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Provide stmmac_disable_hw_lpi_timer() and stmmac_enable_hw_lpi_timer()
to control the hardware transmit LPI timer.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Choong Yong Liang <yong.liang.choong@linux.intel.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1tVZEl-0002LK-LA@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
phylink_stop() will cause phylink to call the mac_link_down() operation
before phylink_stop() returns. As mac_link_down() will call
stmmac_eee_init(false), this will set both priv->eee_active and
priv->eee_enabled to be false, deleting the eee_ctrl_timer if
priv->eee_enabled was previously set.
As stmmac_release() calls phylink_stop() before checking whether
priv->eee_enabled is true, this is a condition that can never be
satisfied, and thus the code within this if() block will never be
executed. Remove it.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Choong Yong Liang <yong.liang.choong@linux.intel.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1tVZEg-0002LE-HH@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Move the initialisation of the EEE software timer to the probe function
as it is unnecessary to do this each time we enable software LPI.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Choong Yong Liang <yong.liang.choong@linux.intel.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1tVZEb-0002L8-DJ@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
priv->eee_enabled and priv->eee_active are both assigned using boolean
values. Type them as bool rather than int.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Choong Yong Liang <yong.liang.choong@linux.intel.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1tVZEW-0002L2-9w@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Since all call sites of stmmac_eee_init() assign priv->eee_active
immediately before, pass this state into stmmac_eee_init() and
assign priv->eee_active within this function.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Choong Yong Liang <yong.liang.choong@linux.intel.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1tVZER-0002Kv-5O@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
All call sites for stmmac_eee_init() assign the return code to
priv->eee_enabled. Rather than having this coded at each call site,
move the assignment inside stmmac_eee_init().
Since stmmac_init_eee() takes priv->lock before checking the state of
priv->eee_enabled, move the assignment within the locked region. Also,
stmmac_suspend() checks the state of this member under the lock. While
two concurrent calls to stmmac_init_eee() aren't possible, there is
a possibility that stmmac_suspend() may run concurrently with a change
of priv->eee_enabled unless we modify it under the lock.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Choong Yong Liang <yong.liang.choong@linux.intel.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1tVZEM-0002Kq-2Z@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
priv->eee_tw_timer is only assigned during initialisation to a
constant value (STMMAC_DEFAULT_TWT_LS) and then never changed.
Remove priv->eee_tw_timer, and instead use STMMAC_DEFAULT_TWT_LS
for both uses in stmmac_eee_init().
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Choong Yong Liang <yong.liang.choong@linux.intel.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1tVZEG-0002Kk-VH@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Convert stmmac to use phy_eee_rx_clock_stop() to set the PHY receive
clock stop in LPI setting, rather than calling the legacy
phy_init_eee() function.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Choong Yong Liang <yong.liang.choong@linux.intel.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1tVZEB-0002Ke-RZ@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Report the number of EEE error statistics in the xstats even when EEE
is not enabled in hardware, but is supported. The PHY maintains this
counter even when EEE is not enabled.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Choong Yong Liang <yong.liang.choong@linux.intel.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1tVZE6-0002KY-Nx@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Through using phylib's EEE state, priv->tx_lpi_enabled has become a
write-only variable. Remove it.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Choong Yong Liang <yong.liang.choong@linux.intel.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1tVZE1-0002KS-K1@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
stmmac_disable_eee_mode() is now only called from stmmac_xmit() when
both priv->tx_path_in_lpi_mode and priv->eee_sw_timer_en are true.
Therefore:
if (!priv->eee_sw_timer_en)
in stmmac_disable_eee_mode() will never be true, so this is dead code.
Remove it, and rename the function to indicate that it now only deals
with software based EEE mode.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Choong Yong Liang <yong.liang.choong@linux.intel.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1tVZDw-0002KL-Gg@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Setting edata->tx_lpi_enabled in stmmac_ethtool_op_get_eee() gets
overwritten by phylib, so there's no point setting this.
In stmmac_ethtool_op_set_eee(), now that stmmac is using the result of
phylib's evaluation of EEE, there is no need to handle anything in the
ethtool EEE ops other than calling through to the appropriate phylink
function, which will pass on to phylib the users request.
As stmmac_disable_eee_mode() is now no longer called from outside
stmmac_main.c, make it static.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Choong Yong Liang <yong.liang.choong@linux.intel.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1tVZDr-0002KF-Cv@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Make stmmac EEE depend on phylib's evaluation of user settings and PHY
negotiation, as indicated by phy->enable_tx_lpi. This will ensure when
phylib has evaluated that the user has disabled LPI, phy_init_eee()
will not be called, and priv->eee_active will be false, causing LPI/EEE
to be disabled.
This is an interim measure - phy_init_eee() will be removed in a later
patch.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Choong Yong Liang <yong.liang.choong@linux.intel.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1tVZDm-0002K9-9w@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Since eee_timer is used to initialise priv->tx_lpi_timer, this also
should be unsigned to avoid a negative number being interpreted as a
very large positive number. Note that this makes the check for negative
numbers passed in as a module parameter redundant, and passing a
negative number will now produce a large delay rather than the
default. Since the default is used without an argument, passing a
negative number would be quite obscure. However, if users do, then
this will need to be revisited.
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Choong Yong Liang <yong.liang.choong@linux.intel.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1tVZDh-0002K3-6y@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The ethtool interface uses u32 for tx_lpi_timer, and so does phylib.
Use u32 to store this internally within stmmac rather than "int"
which could misinterpret large values.
Correct "value" in dwmac4_set_eee_lpi_entry_timer() to use u32
rather than int, which is derived from tx_lpi_timer. Even though this
path won't be used with values larger than STMMAC_ET_MAX, this brings
consistency of type usage to the stmmac code for this variable.
We leave eee_timer unchanged for now, with the assumption that values
up to INT_MAX will safely fit in a u32.
Tested-by: Choong Yong Liang <yong.liang.choong@linux.intel.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1tVZDc-0002Jx-3b@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When stmmac_ethtool_op_get_eee() is called, stmmac sets the tx_lpi_timer
and tx_lpi_enabled members, and then calls into phylink and thus phylib.
phylib overwrites these members.
phylib will also cause a link down/link up transition when settings
that impact the MAC have been changed.
Convert stmmac to use the tx_lpi_timer setting in struct phy_device,
updating priv->tx_lpi_timer each time when the link comes up, rather
than trying to maintain this user setting itself. We initialise the
phylib tx_lpi_timer setting by doing a get_ee-modify-set_eee sequence
with the last known priv->tx_lpi_timer value. In order for this to work
correctly, we also need this member to be initialised earlier.
As stmmac_eee_init() is no longer called outside of stmmac_main.c, make
it static.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Choong Yong Liang <yong.liang.choong@linux.intel.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1tVZDW-0002Jr-W3@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a function to allow configuration of the PCS's clock stop enable
bit, used to configure whether the xMII receive clock can be stopped
during LPI mode.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Choong Yong Liang <yong.liang.choong@linux.intel.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1tVZDR-0002Jl-Ry@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control fix from Rafael Wysocki:
"Fix an OF node leak in the code parsing thermal zone DT properties
(Joe Hattori)"
* tag 'thermal-6.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal: of: fix OF node leak in of_thermal_zone_find()
|
|
In 'ath9k_hw_get_nf_hist_mid()', prefer 'memcpy()' and 'sort()'
over an ad-hoc things. Briefly tested as a separate module.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Link: https://patch.msgid.link/20250109080703.106692-1-dmantipov@yandex.ru
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"Add two more ACPI IRQ override quirks and update the code using them
to avoid unnecessary overhead (Hans de Goede)"
* tag 'acpi-6.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: resource: acpi_dev_irq_override(): Check DMI match last
ACPI: resource: Add TongFang GM5HG0A to irq1_edge_low_force_override[]
ACPI: resource: Add Asus Vivobook X1504VAP to irq1_level_low_skip_override[]
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into drm-next
DMEM cgroup pull request
This introduces a new cgroup controller to limit the device memory.
Notable users would be DRM, dma-buf heaps, or v4l2.
This pull request is based on the series developped by Maarten
Lankhorst, Friedrich Vock, and I:
https://lore.kernel.org/all/20241204134410.1161769-1-dev@lankhorst.se/
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <mripard@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250110-cryptic-warm-mandrill-b71f5d@houat
|
|
Pull drm fixes from Dave Airlie:
"Regular weekly fixes, this has the usual amdgpu/xe/i915 bits.
There is a bigger bunch of mediatek patches that I considered not
including at this stage, but all the changes (except for one were
obvious small fixes, and the rotation one is a few lines, and I
suppose will help someone have their screen up the right way), I
decided to include it since I expect it got slowed down by holidays
etc, and it's not that mainstream a hw platform.
i915:
- Revert "drm/i915/hdcp: Don't enable HDCP1.4 directly from
check_link"
amdgpu:
- Display interrupt fixes
- Fix display max surface mismatches
- Fix divide error in DM plane scale calcs
- Display divide by 0 checks in dml helpers
- SMU 13 AD/DC interrrupt handling fix
- Fix locking around buddy trim handling
amdkfd:
- Fix page fault with shader debugger enabled
- Fix eviction fence wq handling
xe:
- Avoid a NULL ptr deref when wedging
- Fix power gate sequence on DG1
mediatek:
- Revert "drm/mediatek: dsi: Correct calculation formula of PHY
Timing"
- Set private->all_drm_private[i]->drm to NULL if mtk_drm_bind
returns err
- Move mtk_crtc_finish_page_flip() to ddp_cmdq_cb()
- Only touch DISP_REG_OVL_PITCH_MSB if AFBC is supported
- Add support for 180-degree rotation in the display driver
- Stop selecting foreign drivers
- Revert "drm/mediatek: Switch to for_each_child_of_node_scoped()"
- Fix YCbCr422 color format issue for DP
- Fix mode valid issue for dp
- dp: Reference common DAI properties
- dsi: Add registers to pdata to fix MT8186/MT8188
- Remove unneeded semicolon
- Add return value check when reading DPCD
- Initialize pointer in mtk_drm_of_ddp_path_build_one()"
* tag 'drm-fixes-2025-01-11' of https://gitlab.freedesktop.org/drm/kernel: (26 commits)
drm/xe/dg1: Fix power gate sequence.
drm/xe: Fix tlb invalidation when wedging
Revert "drm/i915/hdcp: Don't enable HDCP1.4 directly from check_link"
drm/amdgpu: Add a lock when accessing the buddy trim function
drm/amd/pm: fix BUG: scheduling while atomic
drm/amdkfd: wq_release signals dma_fence only when available
drm/amd/display: Add check for granularity in dml ceil/floor helpers
drm/amdkfd: fixed page fault when enable MES shader debugger
drm/amd/display: fix divide error in DM plane scale calcs
drm/amd/display: increase MAX_SURFACES to the value supported by hw
drm/amd/display: fix page fault due to max surface definition mismatch
drm/amd/display: Remove unnecessary amdgpu_irq_get/put
drm/mediatek: Initialize pointer in mtk_drm_of_ddp_path_build_one()
drm/mediatek: Add return value check when reading DPCD
drm/mediatek: Remove unneeded semicolon
drm/mediatek: mtk_dsi: Add registers to pdata to fix MT8186/MT8188
dt-bindings: display: mediatek: dp: Reference common DAI properties
drm/mediatek: Fix mode valid issue for dp
drm/mediatek: Fix YCbCr422 color format issue for DP
Revert "drm/mediatek: Switch to for_each_child_of_node_scoped()"
...
|
|
Add support to request pdev puncture stats from firmware through
HTT stats type 46. These stats give the count of number of
subbands used in different wifi standards.
Sample output:
-------------
echo 46 > /sys/kernel/debug/ath12k/pci-0000\:06\:00.0/mac0/htt_stats_type
cat /sys/kernel/debug/ath12k/pci-0000\:06\:00.0/mac0/htt_stats
HTT_PDEV_PUNCTURE_STATS_TLV:
mac_id = 0
tx_ofdm_su_last_used_pattern_mask = 0x00000001
tx_ofdm_su_num_subbands_used_cnt_01 = 217
tx_ofdm_su_num_subbands_used_cnt_02 = 0
tx_ofdm_su_num_subbands_used_cnt_03 = 0
.....
HTT_PDEV_PUNCTURE_STATS_TLV:
mac_id = 0
tx_ax_dl_mu_ofdma_last_used_pattern_mask = 0x00000000
tx_ax_dl_mu_ofdma_num_subbands_used_cnt_01 = 0
tx_ax_dl_mu_ofdma_num_subbands_used_cnt_02 = 0
tx_ax_dl_mu_ofdma_num_subbands_used_cnt_03 = 0
.....
HTT_PDEV_PUNCTURE_STATS_TLV:
mac_id = 0
tx_be_dl_mu_ofdma_last_used_pattern_mask = 0x00000000
tx_be_dl_mu_ofdma_num_subbands_used_cnt_01 = 0
tx_be_dl_mu_ofdma_num_subbands_used_cnt_02 = 0
tx_be_dl_mu_ofdma_num_subbands_used_cnt_03 = 0
.....
HTT_PDEV_PUNCTURE_STATS_TLV:
mac_id = 0
rx_ax_ul_mu_ofdma_last_used_pattern_mask = 0x00000000
rx_ax_ul_mu_ofdma_num_subbands_used_cnt_01 = 0
rx_ax_ul_mu_ofdma_num_subbands_used_cnt_02 = 0
rx_ax_ul_mu_ofdma_num_subbands_used_cnt_03 = 0
.....
HTT_PDEV_PUNCTURE_STATS_TLV:
mac_id = 0
rx_be_ul_mu_ofdma_last_used_pattern_mask = 0x00000000
rx_be_ul_mu_ofdma_num_subbands_used_cnt_01 = 0
rx_be_ul_mu_ofdma_num_subbands_used_cnt_02 = 0
rx_be_ul_mu_ofdma_num_subbands_used_cnt_03 = 0
.....
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4
Signed-off-by: Rajat Soni <quic_rajson@quicinc.com>
Signed-off-by: Roopni Devanathan <quic_rdevanat@quicinc.com>
Acked-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20241218035711.2573584-3-quic_rdevanat@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
Add support to request Address Search Table(AST) entries stats
from firmware through HTT stats type 41. These stats give AST entries
related information such as software peer id, MAC address, pdev id,
vdev, id, next hop, etc.
Sample output:
-------------
echo 41 > /sys/kernel/debug/ath12k/pci-0000\:06\:00.0/mac0/htt_stats_type
cat /sys/kernel/debug/ath12k/pci-0000\:06\:00.0/mac0/htt_stats
HTT_AST_ENTRY_TLV:
ast_index = 10
mac_addr = 00:00:00:01:00:00
sw_peer_id = 0
pdev_id = 3
vdev_id = 255
next_hop = 0
mcast = 0
monitor_direct = 0
mesh_sta = 0
mec = 0
intra_bss = 0
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4
Signed-off-by: Roopni Devanathan <quic_rdevanat@quicinc.com>
Acked-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20241218035711.2573584-2-quic_rdevanat@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
Add support to request OFDMA stats of transmit buffers from firmware through
HTT stats type 32. These stats give information about NDPA, NDP, BRP and
steering mechanisms.
Note: WCN7850 firmware version -
WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4 does not
support HTT stats type 32.
Sample output:
-------------
echo 32 > /sys/kernel/debug/ath12k/pci-0000\:06\:00.0/mac0/htt_stats_type
cat /sys/kernel/debug/ath12k/pci-0000\:06\:00.0/mac0/htt_stats
HTT_TXBF_OFDMA_AX_NDPA_STATS_TLV:
ax_ofdma_ndpa_queued = 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0, 12:0, 13:0, 14:0, 15:0, 16:0,
17:0, 18:0, 19:0, 20:0, 21:0, 22:0, 23:0, 24:0, 25:0, 26:0, 27:0, 28:0, 29:0, 30:0, 31:0, 32:0, 33:0, 34:0, 35:0, 36:0, 37:0
ax_ofdma_ndpa_tried = 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0, 12:0, 13:0, 14:0, 15:0, 16:0,
17:0, 18:0, 19:0, 20:0, 21:0, 22:0, 23:0, 24:0, 25:0, 26:0, 27:0, 28:0, 29:0, 30:0, 31:0, 32:0, 33:0, 34:0, 35:0, 36:0, 37:0
.....
HTT_TXBF_OFDMA_AX_NDP_STATS_TLV:
ax_ofdma_ndp_queued = 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0, 12:0, 13:0, 14:0, 15:0, 16:0,
17:0, 18:0, 19:0, 20:0, 21:0, 22:0, 23:0, 24:0, 25:0, 26:0, 27:0, 28:0, 29:0, 30:0, 31:0, 32:0, 33:0, 34:0, 35:0, 36:0, 37:0
ax_ofdma_ndp_tried = 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0, 12:0, 13:0, 14:0, 15:0, 16:0,
17:0, 18:0, 19:0, 20:0, 21:0, 22:0, 23:0, 24:0, 25:0, 26:0, 27:0, 28:0, 29:0, 30:0, 31:0, 32:0, 33:0, 34:0, 35:0, 36:0, 37:0
.....
HTT_TXBF_OFDMA_AX_BRP_STATS_TLV:
ax_ofdma_brpoll_queued = 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0, 12:0, 13:0, 14:0, 15:0, 16:0,
17:0, 18:0, 19:0, 20:0, 21:0, 22:0, 23:0, 24:0, 25:0, 26:0, 27:0, 28:0, 29:0, 30:0, 31:0, 32:0, 33:0, 34:0, 35:0, 36:0, 37:0
ax_ofdma_brpoll_tied = 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0, 12:0, 13:0, 14:0, 15:0, 16:0,
17:0, 18:0, 19:0, 20:0, 21:0, 22:0, 23:0, 24:0, 25:0, 26:0, 27:0, 28:0, 29:0, 30:0, 31:0, 32:0, 33:0, 34:0, 35:0, 36:0, 37:0
.....
HTT_TXBF_OFDMA_AX_STEER_STATS_TLV:
ax_ofdma_num_ppdu_steer = 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0, 12:0, 13:0, 14:0, 15:0, 16:0,
17:0, 18:0, 19:0, 20:0, 21:0, 22:0, 23:0, 24:0, 25:0, 26:0, 27:0, 28:0, 29:0, 30:0, 31:0, 32:0, 33:0, 34:0, 35:0, 36:0, 37:0
ax_ofdma_num_usrs_prefetch = 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0, 12:0, 13:0, 14:0, 15:0, 16:0,
17:0, 18:0, 19:0, 20:0, 21:0, 22:0, 23:0, 24:0, 25:0, 26:0, 27:0, 28:0, 29:0, 30:0, 31:0, 32:0, 33:0, 34:0, 35:0, 36:0, 37:0
.....
HTT_TXBF_OFDMA_AX_STEER_MPDU_STATS_TLV:
rbo_steer_mpdus_tried = 0
rbo_steer_mpdus_failed = 0
sifs_steer_mpdus_tried = 0
sifs_steer_mpdus_failed = 0
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.1.1-00214-QCAHKSWPL_SILICONZ-1
Signed-off-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com>
Signed-off-by: Roopni Devanathan <quic_rdevanat@quicinc.com>
Acked-by: Jeff Johnson <jjohnson@kernel.org>
Link: https://patch.msgid.link/20241128110949.3672364-3-quic_rdevanat@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
Add support to request transmit rate buffer stats from firmware through
HTT stats type 31. These stats give information such as MCS, NSS and
bandwidth of transmit and input buffer.
Sample output:
-------------
echo 31 > /sys/kernel/debug/ath12k/pci-0000\:06\:00.0/mac0/htt_stats_type
cat /sys/kernel/debug/ath12k/pci-0000\:06\:00.0/mac0/htt_stats
HTT_STATS_PDEV_TX_RATE_TXBF_STATS:
Legacy OFDM Rates: 6 Mbps: 0, 9 Mbps: 0, 12 Mbps: 0, 18 Mbps: 0
24 Mbps: 0, 36 Mbps: 0, 48 Mbps: 0, 54 Mbps: 0
tx_ol_mcs = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0, 12:0, 13:0
tx_ibf_mcs = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0, 12:0, 13:0
tx_txbf_mcs = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0, 8:0, 9:0, 10:0, 11:0, 12:0, 13:0
tx_ol_nss = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0
tx_ibf_nss = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0
tx_txbf_nss = 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0
tx_ol_bw = 0:0, 1:0, 2:0, 3:0, 4:0
half_tx_ol_bw = 0:0, 1:0, 2:0, 3:0, 4:0
quarter_tx_ol_bw = 0:0, 1:0, 2:0, 3:0, 4:0
tx_ibf_bw = 0:0, 1:0, 2:0, 3:0, 4:0
half_tx_ibf_bw = 0:0, 1:0, 2:0, 3:0, 4:0
quarter_tx_ibf_bw = 0:0, 1:0, 2:0, 3:0, 4:0
tx_txbf_bw = 0:0, 1:0, 2:0, 3:0, 4:0
half_tx_txbf_bw = 0:0, 1:0, 2:0, 3:0, 4:0
quarter_tx_txbf_bw = 0:0, 1:0, 2:0, 3:0, 4:0
HTT_STATS_PDEV_TXBF_FLAG_RETURN_STATS:
TXBF_reason_code_stats: 0:0, 1:0, 2:0, 3:0, 4:0, 5:0, 6:0, 7:0
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.1.1-00214-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Signed-off-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com>
Signed-off-by: Roopni Devanathan <quic_rdevanat@quicinc.com>
Acked-by: Kalle Valo <kvalo@kernel.org>
Acked-by: Jeff Johnson <jjohnson@kernel.org>
Link: https://patch.msgid.link/20241128110949.3672364-2-quic_rdevanat@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
- a handful of selftest fixes
- fix a memory leak in relocation processing during module loading
- avoid sleeping in die()
- fix kprobe instruction slot address calculations
- fix DT node reference leak in SBI idle probing
- avoid initializing out of bounds pages on sparse vmemmap systems with
a gap at the start of their physical memory map
- fix backtracing through exceptions
- _Q_PENDING_LOOPS is now defined whenever QUEUED_SPINLOCKS=y
- local labels in entry.S are now marked with ".L", which prevents them
from trashing backtraces
- a handful of fixes for SBI-based performance counters
* tag 'riscv-for-linus-6.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
drivers/perf: riscv: Do not allow invalid raw event config
drivers/perf: riscv: Return error for default case
drivers/perf: riscv: Fix Platform firmware event data
tools: selftests: riscv: Add test count for vstate_prctl
tools: selftests: riscv: Add pass message for v_initval_nolibc
riscv: use local label names instead of global ones in assembly
riscv: qspinlock: Fixup _Q_PENDING_LOOPS definition
riscv: stacktrace: fix backtracing through exceptions
riscv: mm: Fix the out of bound issue of vmemmap address
cpuidle: riscv-sbi: fix device node release in early exit of for_each_possible_cpu
riscv: kprobes: Fix incorrect address calculation
riscv: Fix sleeping in invalid context in die()
riscv: module: remove relocation_head rel_entry member allocation
riscv: selftests: Fix warnings pointer masking test
|
|
[WHAT & HOW]
Variables, used as denominators and maybe not assigned to other values,
should be initialized to non-zero to avoid DIVIDE_BY_ZERO, as reported
by Coverity.
Reviewed-by: Austin Zheng <austin.zheng@amd.com>
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit e2c4c6c10542ccfe4a0830bb6c9fd5b177b7bbb7)
|
|
[Why]
Without the dmub hw lock, it may cause the lock timeout issue
while do modeset on PSR1 eDP panel.
[How]
Allow dmub hw lock for PSR1.
Reviewed-by: Sun peng Li <sunpeng.li@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit a2b5a9956269f4c1a09537177f18ab0229fe79f7)
|
|
[why]
When first time of link training is fail,
eDP would be powered down and
would not be powered up for next retry link training.
It causes that all of retry link linking would be fail.
[how]
We has extracted both power up and down sequence from
enable/disable link output function before DCN32.
We remov eDP power down in dcn32_disable_link_output().
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Yiling Chen <yi-ling.chen2@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit f5860c88cdfe7300d08c1aef881bba0cac369e34)
|
|
[Why]
There should not be any need to revalidate bandwidth on memory placement
change, since the fb is expected to be pinned to DCN-accessable memory
before scanout. For APU it's DRAM, and DGPU, it's VRAM. However, async
flips + memory type change needs to be rejected.
[How]
Do not set lock_and_validation_needed on mem_type change. Instead,
reject an async_flip request if the crtc's buffer(s) changed mem_type.
This may fix stuttering/corruption experienced with PSR SU and PSR1
panels, if the compositor allocates fbs in both VRAM carveout and GTT
and flips between them.
Fixes: a7c0cad0dc06 ("drm/amd/display: ensure async flips are only accepted for fast updates")
Reviewed-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 4caacd1671b7a013ad04cd8b6398f002540bdd4d)
Cc: stable@vger.kernel.org
|
|
[Why]
Outside of a modeset/link configuration change, we should not have to
wait for the panel to exit PSR. Depending on the panel and it's state,
it may take multiple frames for it to exit PSR. Therefore, waiting in
all scenarios may cause perceived stuttering, especially in combination
with faster vblank shutdown.
[How]
PSR1 disable is hooked up to the vblank enable event, and vice versa. In
case of vblank enable, do not wait for panel to exit PSR, but still wait
in all other cases.
We also avoid a call to unnecessarily change power_opts on disable -
this ends up sending another command to dmcub fw.
When testing against IGT, some crc tests like kms_plane_alpha_blend and
amd_hotplug were failing due to CRC timeouts. This was found to be
caused by the early return before HW has fully exited PSR1. Fix this by
first making sure we grab a vblank reference, then waiting for panel to
exit PSR1, before programming hw for CRC generation.
Fixes: 58a261bfc967 ("drm/amd/display: use a more lax vblank enable policy for older ASICs")
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3743
Reviewed-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit aa6713fa2046f4c09bf3013dd1420ae15603ca6f)
Cc: stable@vger.kernel.org
|
|
Revert commit 284f141f5ce5 ("drm/amd/display: Enable urgent latency adjustments for DCN35")
[Why & How]
Urgent latency increase caused 2.8K OLED monitor caused it to
block this panel support P0.
Reverting this change does not reintroduce the netflix corruption issue
which it fixed.
Fixes: 284f141f5ce5 ("drm/amd/display: Enable urgent latency adjustments for DCN35")
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Nicholas Susanto <Nicholas.Susanto@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit c7ccfc0d4241a834c25a9a9e1e78b388b4445d23)
Cc: stable@vger.kernel.org
|
|
[Why]
Observed frame rate get dropped by tool like glxgear. Even though the
output to monitor is 60Hz, the rendered frame rate drops to 30Hz lower.
It's due to code path in some cases will trigger
dm_dp_mst_is_port_support_mode() to read out remote Link status to
assess the available bandwidth for dsc maniplation. Overhead of keep
reading remote DPCD is considerable.
[How]
Store the remote link BW in mst_local_bw and use end-to-end full_pbn
as an indicator to decide whether update the remote link bw or not.
Whenever we need the info to assess the BW, visit the stored one first.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3720
Fixes: fa57924c76d9 ("drm/amd/display: Refactor function dm_dp_mst_is_port_support_mode()")
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Jerry Zuo <jerry.zuo@amd.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 4a9a918545455a5979c6232fcf61ed3d8f0db3ae)
Cc: stable@vger.kernel.org
|
|
[Why & How]
Currently in dm_dp_mst_is_port_support_mode(), when valdidating mode
under dsc decoding at the last DP link config, we only validate the
case when there is an UFP. However, if the MSTB LCT=1, there is no
UFP.
Under this case, use root_link_bw_in_kbps as the available bw to
compare.
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/3720
Fixes: fa57924c76d9 ("drm/amd/display: Refactor function dm_dp_mst_is_port_support_mode()")
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Jerry Zuo <jerry.zuo@amd.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit a04d9534a8a75b2806c5321c387be450c364b55e)
Cc: stable@vger.kernel.org
|
|
Only apply when compute profile is selected. This is
the only supported configuration. Selecting other
profiles can lead to performane degradations.
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit d477e39532d725b1cdb3c8005c689c74ffbf3b94)
Cc: stable@vger.kernel.org # 6.12.x
|
|
This version brings along following fixes:
- Add some feature for secure display
- Add replay desync error count tracking and reset
- Update chip_cap defines and usage
- Remove unnecessary eDP power down
- Fix some stuttering/corruption issue on PSR panel
- Cleanup and refactoring DML2.1
Acked-by: Wayne Lin <wayne.lin@amd.com>
Reviewed-by: Martin Leung <martin.leung@amd.com>
Signed-off-by: Ryan Seto <ryanseto@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[why & how]
this is to init to HW real DTBCLK.
and use real HW DTBCLK status to update internal logic state
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Martin Leung <martin.leung@amd.com>
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Signed-off-by: Ausef Yousof <Ausef.Yousof@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHY]
We see unstable DP LL 4.2.1.3 test result with dpia pre-train. It is
because the outbox interrupt mechanism can not handle HPD
immediately and require some improvement.
[HOW]
1. not enable link if hpd_pending is true.
2. abort pre-train if training failed and hpd_pending is true.
3. check if 2 lane supported when it is alt mode
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Reviewed-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com>
Signed-off-by: Peichen Huang <PeiChen.Huang@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why & How]
Add several DML21 fixes
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Austin Zheng <Austin.Zheng@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
Without the dmub hw lock, it may cause the lock timeout issue
while do modeset on PSR1 eDP panel.
[How]
Allow dmub hw lock for PSR1.
Reviewed-by: Sun peng Li <sunpeng.li@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
