summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2020-12-28habanalabs: update comment in hl_boot_if.hOded Gabbay
Hard-reset flag is updated in many stages of the boot sequence of the firmware. Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2020-12-28habanalabs/gaudi: enhance reset messageOded Gabbay
Print the initiator who performs the hard-reset for easier debugging. Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2020-12-28habanalabs: full FW hard reset supportOfir Bitton
Driver must fetch FW hard reset capability at every FW boot stage: preboot, CPU boot, CPU application. If hard reset is triggered, driver will take into consideration only the last capability received. Signed-off-by: Ofir Bitton <obitton@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2020-12-28habanalabs/gaudi: disable CGM at HW initializationOded Gabbay
In case the clock gating was enabled in preboot we need to disable it at the H/W initialization stage before touching the MME/TPC registers. Otherwise, the ASIC can get stuck. If the security is enabled in the firmware level, the CGM is always disabled and the driver can't enable it. Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2020-12-28habanalabs: Revise comment to align with mirror list nameTomer Tayar
hw_queues_mirror was renamed to cs_mirror, so revise accordingly a comment that refers to this list. Signed-off-by: Tomer Tayar <ttayar@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2020-12-28habanalabs/gaudi: do not set EB in collective slave queuesAlon Mizrahi
We don't need to set EB on signal packets from collective slave queues as it degrades performance. Because the slaves are the network queues, the engine barrier doesn't actually guarantee that the packet has been sent. Signed-off-by: Alon Mizrahi <amizrahi@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2020-12-28habanalabs: preboot hard reset supportOfir Bitton
FW hard reset capability indication is now moved to preboot stage. Driver will check if HW is dirty only after it validated preboot is up. If HW is dirty, driver will perform a hard reset according to the FW capability. In addition, FW defines a new message which driver need to send in order to initiate a hard reset. Signed-off-by: Ofir Bitton <obitton@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2020-12-28habanalabs: remove generic gaudi get_pll_freq functionAlon Mizrahi
As we only fetch the CPU_PLL frequency in gaudi, we don't need a generic get_pll_frequency function which takes a pll index as input Signed-off-by: Alon Mizrahi <amizrahi@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2020-12-28habanalabs: fetch PSOC PLL frequency from F/W in goyaAlon Mizrahi
When the F/W security is enabled, goya needs to fetch the PSOC pll frequency through a dedicated interface Signed-off-by: Alon Mizrahi <amizrahi@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2020-12-28habanalabs: Fix a missing-braces warningTomer Tayar
Fix a compilation "missing braces around initializer" warning. Signed-off-by: Tomer Tayar <ttayar@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2020-12-28opp: Call the missing clk_put() on errorViresh Kumar
Fix the clock reference counting by calling the missing clk_put() in the error path. Cc: v5.10 <stable@vger.kernel.org> # v5.10 Fixes: dd461cd9183f ("opp: Allow dev_pm_opp_get_opp_table() to return -EPROBE_DEFER") Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2020-12-28opp: fix memory leak in _allocate_opp_tableQuanyang Wang
In function _allocate_opp_table, opp_dev is allocated and referenced by opp_table via _add_opp_dev. But in the case that the subsequent calls return -EPROBE_DEFER, it will jump to err label and opp_table will be freed. Then opp_dev becomes an unreferenced object to cause memory leak. So let's call _remove_opp_dev to do the cleanup. This fixes the following kmemleak report: unreferenced object 0xffff000801524a00 (size 128): comm "swapper/0", pid 1, jiffies 4294892465 (age 84.616s) hex dump (first 32 bytes): 40 00 56 01 08 00 ff ff 40 00 56 01 08 00 ff ff @.V.....@.V..... b8 52 77 7f 08 00 ff ff 00 3c 4c 00 08 00 ff ff .Rw......<L..... backtrace: [<00000000b1289fb1>] kmemleak_alloc+0x30/0x40 [<0000000056da48f0>] kmem_cache_alloc+0x3d4/0x588 [<00000000a84b3b0e>] _add_opp_dev+0x2c/0x88 [<0000000062a380cd>] _add_opp_table_indexed+0x124/0x268 [<000000008b4c8f1f>] dev_pm_opp_of_add_table+0x20/0x1d8 [<00000000e5316798>] dev_pm_opp_of_cpumask_add_table+0x48/0xf0 [<00000000db0a8ec2>] dt_cpufreq_probe+0x20c/0x448 [<0000000030a3a26c>] platform_probe+0x68/0xd8 [<00000000c618e78d>] really_probe+0xd0/0x3a0 [<00000000642e856f>] driver_probe_device+0x58/0xb8 [<00000000f10f5307>] device_driver_attach+0x74/0x80 [<0000000004f254b8>] __driver_attach+0x58/0xe0 [<0000000009d5d19e>] bus_for_each_dev+0x70/0xc8 [<0000000000d22e1c>] driver_attach+0x24/0x30 [<0000000001d4e952>] bus_add_driver+0x14c/0x1f0 [<0000000089928aaa>] driver_register+0x64/0x120 Cc: v5.10 <stable@vger.kernel.org> # v5.10 Fixes: dd461cd9183f ("opp: Allow dev_pm_opp_get_opp_table() to return -EPROBE_DEFER") Signed-off-by: Quanyang Wang <quanyang.wang@windriver.com> [ Viresh: Added the stable tag ] Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2020-12-27Merge tag 'ntb-5.11' of git://github.com/jonmason/ntbLinus Torvalds
Pull NTB fixes from Jon Mason: "Bug fix for IDT NTB and Intel NTB LTR management support" * tag 'ntb-5.11' of git://github.com/jonmason/ntb: ntb: intel: add Intel NTB LTR vendor support for gen4 NTB ntb: idt: fix error check in ntb_hw_idt.c
2020-12-27Merge branch 'linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto fixes from Herbert Xu: "Fix a number of autobuild failures due to missing Kconfig dependencies" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: qat - add CRYPTO_AES to Kconfig dependencies crypto: keembay - Add dependency on HAS_IOMEM crypto: keembay - CRYPTO_DEV_KEEMBAY_OCS_AES_SM4 should depend on ARCH_KEEMBAY
2020-12-27vhost/vsock: add IOTLB API supportStefano Garzarella
This patch enables the IOTLB API support for vhost-vsock devices, allowing the userspace to emulate an IOMMU for the guest. These changes were made following vhost-net, in details this patch: - exposes VIRTIO_F_ACCESS_PLATFORM feature and inits the iotlb device if the feature is acked - implements VHOST_GET_BACKEND_FEATURES and VHOST_SET_BACKEND_FEATURES ioctls - calls vq_meta_prefetch() before vq processing to prefetch vq metadata address in IOTLB - provides .read_iter, .write_iter, and .poll callbacks for the chardev; they are used by the userspace to exchange IOTLB messages This patch was tested specifying "intel_iommu=strict" in the guest kernel command line. I used QEMU with a patch applied [1] to fix a simple issue (that patch was merged in QEMU v5.2.0): $ qemu -M q35,accel=kvm,kernel-irqchip=split \ -drive file=fedora.qcow2,format=qcow2,if=virtio \ -device intel-iommu,intremap=on,device-iotlb=on \ -device vhost-vsock-pci,guest-cid=3,iommu_platform=on,ats=on [1] https://lists.gnu.org/archive/html/qemu-devel/2020-10/msg09077.html Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Link: https://lore.kernel.org/r/20201223143638.123417-1-sgarzare@redhat.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com>
2020-12-26mfd: ab8500-debugfs: Remove extraneous seq_putcLinus Torvalds
Commit c9a3c4e637ac ("mfd: ab8500-debugfs: Remove extraneous curly brace") removed a left-over curly brace that caused build failures, but Joe Perches points out that the subsequent 'seq_putc()' should also be removed, because the commit that caused all these problems already added the final '\n' to the seq_printf() above it. Reported-by: Joe Perches <joe@perches.com> Fixes: 886c8121659d ("mfd: ab8500-debugfs: Remove the racy fiddling with irq_desc") Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-25Merge tag 'pci-v5.11-fixes-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI fixes from Bjorn Helgaas: - Fix a tegra enumeration regression (Rob Herring) - Fix a designware-host check that warned on *success*, not failure (Alexander Lobakin) * tag 'pci-v5.11-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: PCI: dwc: Fix inverted condition of DMA mask setup warning PCI: tegra: Fix host link initialization
2020-12-25mfd: ab8500-debugfs: Remove extraneous curly braceNathan Chancellor
Clang errors: drivers/mfd/ab8500-debugfs.c:1526:2: error: non-void function does not return a value [-Werror,-Wreturn-type] } ^ drivers/mfd/ab8500-debugfs.c:1528:2: error: expected identifier or '(' return 0; ^ drivers/mfd/ab8500-debugfs.c:1529:1: error: extraneous closing brace ('}') } ^ 3 errors generated. The cleanup in ab8500_interrupts_show left a curly brace around, remove it to fix the error. Fixes: 886c8121659d ("mfd: ab8500-debugfs: Remove the racy fiddling with irq_desc") Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-25PCI: dwc: Fix inverted condition of DMA mask setup warningAlexander Lobakin
Commit 660c486590aa ("PCI: dwc: Set 32-bit DMA mask for MSI target address allocation") added dma_mask_set() call to explicitly set 32-bit DMA mask for MSI message mapping, but for now it throws a warning on ret == 0, while dma_set_mask() returns 0 in case of success. Fix this by inverting the condition. [bhelgaas: join string to make it greppable] Fixes: 660c486590aa ("PCI: dwc: Set 32-bit DMA mask for MSI target address allocation") Link: https://lore.kernel.org/r/20201222150708.67983-1-alobakin@pm.me Signed-off-by: Alexander Lobakin <alobakin@pm.me> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-12-25PCI: tegra: Fix host link initializationRob Herring
Commit b9ac0f9dc8ea ("PCI: dwc: Move dw_pcie_setup_rc() to DWC common code") broke enumeration of downstream devices on Tegra: In non-working case (next-20201211): 0001:00:00.0 PCI bridge: NVIDIA Corporation Device 1ad2 (rev a1) 0001:01:00.0 SATA controller: Marvell Technology Group Ltd. Device 9171 (rev 13) 0005:00:00.0 PCI bridge: NVIDIA Corporation Device 1ad0 (rev a1) In working case (v5.10-rc7): 0001:00:00.0 PCI bridge: Molex Incorporated Device 1ad2 (rev a1) 0001:01:00.0 SATA controller: Marvell Technology Group Ltd. Device 9171 (rev 13) 0005:00:00.0 PCI bridge: Molex Incorporated Device 1ad0 (rev a1) 0005:01:00.0 PCI bridge: PLX Technology, Inc. Device 3380 (rev ab) 0005:02:02.0 PCI bridge: PLX Technology, Inc. Device 3380 (rev ab) 0005:03:00.0 USB controller: PLX Technology, Inc. Device 3380 (rev ab) The problem seems to be dw_pcie_setup_rc() is now called twice before and after the link up handling. The fix is to move Tegra's link up handling to .start_link() function like other DWC drivers. Tegra is a bit more complicated than others as it re-inits the whole DWC controller to retry the link. With this, the initialization ordering is restored to match the prior sequence. Fixes: b9ac0f9dc8ea ("PCI: dwc: Move dw_pcie_setup_rc() to DWC common code") Link: https://lore.kernel.org/r/20201218143905.1614098-1-robh@kernel.org Reported-by: Mian Yousaf Kaukab <ykaukab@suse.de> Tested-by: Mian Yousaf Kaukab <ykaukab@suse.de> Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Jonathan Hunter <jonathanh@nvidia.com> Cc: Vidya Sagar <vidyas@nvidia.com>
2020-12-25drm/amd/display: avoid uninitialized variable warningLinus Torvalds
clang (quite rightly) complains fairly loudly about the newly added mpc1_get_mpc_out_mux() function returning an uninitialized value if the 'opp_id' checks don't pass. This may not happen in practice, but the code really shouldn't return garbage if the sanity checks don't pass. So just initialize 'val' to zero to avoid the issue. Fixes: 110b055b2827 ("drm/amd/display: add getter routine to retrieve mpcc mux") Cc: Josip Pavic <Josip.Pavic@amd.com> Cc: Bindu Ramamurthy <bindu.r@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-24Merge tag 'irq-core-2020-12-23' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq updates from Thomas Gleixner: "This is the second attempt after the first one failed miserably and got zapped to unblock the rest of the interrupt related patches. A treewide cleanup of interrupt descriptor (ab)use with all sorts of racy accesses, inefficient and disfunctional code. The goal is to remove the export of irq_to_desc() to prevent these things from creeping up again" * tag 'irq-core-2020-12-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (30 commits) genirq: Restrict export of irq_to_desc() xen/events: Implement irq distribution xen/events: Reduce irq_info:: Spurious_cnt storage size xen/events: Only force affinity mask for percpu interrupts xen/events: Use immediate affinity setting xen/events: Remove disfunct affinity spreading xen/events: Remove unused bind_evtchn_to_irq_lateeoi() net/mlx5: Use effective interrupt affinity net/mlx5: Replace irq_to_desc() abuse net/mlx4: Use effective interrupt affinity net/mlx4: Replace irq_to_desc() abuse PCI: mobiveil: Use irq_data_get_irq_chip_data() PCI: xilinx-nwl: Use irq_data_get_irq_chip_data() NTB/msi: Use irq_has_action() mfd: ab8500-debugfs: Remove the racy fiddling with irq_desc pinctrl: nomadik: Use irq_has_action() drm/i915/pmu: Replace open coded kstat_irqs() copy drm/i915/lpe_audio: Remove pointless irq_to_desc() usage s390/irq: Use irq_desc_kstat_cpu() in show_msi_interrupt() parisc/irq: Use irq_desc_kstat_cpu() in show_interrupts() ...
2020-12-24Merge tag 'efi_updates_for_v5.11' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull EFI updates from Borislav Petkov: "These got delayed due to a last minute ia64 build issue which got fixed in the meantime. EFI updates collected by Ard Biesheuvel: - Don't move BSS section around pointlessly in the x86 decompressor - Refactor helper for discovering the EFI secure boot mode - Wire up EFI secure boot to IMA for arm64 - Some fixes for the capsule loader - Expose the RT_PROP table via the EFI test module - Relax DT and kernel placement restrictions on ARM with a few followup fixes: - fix the build breakage on IA64 caused by recent capsule loader changes - suppress a type mismatch build warning in the expansion of EFI_PHYS_ALIGN on ARM" * tag 'efi_updates_for_v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: efi: arm: force use of unsigned type for EFI_PHYS_ALIGN efi: ia64: disable the capsule loader efi: stub: get rid of efi_get_max_fdt_addr() efi/efi_test: read RuntimeServicesSupported efi: arm: reduce minimum alignment of uncompressed kernel efi: capsule: clean scatter-gather entries from the D-cache efi: capsule: use atomic kmap for transient sglist mappings efi: x86/xen: switch to efi_get_secureboot_mode helper arm64/ima: add ima_arch support ima: generalize x86/EFI arch glue for other EFI architectures efi: generalize efi_get_secureboot efi/libstub: EFI_GENERIC_STUB_INITRD_CMDLINE_LOADER should not default to yes efi/x86: Only copy the compressed kernel image in efi_relocate_kernel() efi/libstub/x86: simplify efi_is_native()
2020-12-24Merge tag 'block-5.11-2020-12-23' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block fixes from Jens Axboe: "A few stragglers in here, but mostly just straight fixes. In particular: - Set of rnbd fixes for issues around changes for the merge window (Gioh, Jack, Md Haris Iqbal) - iocost tracepoint addition (Baolin) - Copyright/maintainers update (Christoph) - Remove old blk-mq fast path CPU warning (Daniel) - loop max_part fix (Josh) - Remote IPI threaded IRQ fix (Sebastian) - dasd stable fixes (Stefan) - bcache merge window fixup and style fixup (Yi, Zheng)" * tag 'block-5.11-2020-12-23' of git://git.kernel.dk/linux-block: md/bcache: convert comma to semicolon bcache:remove a superfluous check in register_bcache block: update some copyrights block: remove a pointless self-reference in block_dev.c MAINTAINERS: add fs/block_dev.c to the block section blk-mq: Don't complete on a remote CPU in force threaded mode s390/dasd: fix list corruption of lcu list s390/dasd: fix list corruption of pavgroup group list s390/dasd: prevent inconsistent LCU device data s390/dasd: fix hanging device offline processing blk-iocost: Add iocg idle state tracepoint nbd: Respect max_part for all partition scans block/rnbd-clt: Does not request pdu to rtrs-clt block/rnbd-clt: Dynamically allocate sglist for rnbd_iu block/rnbd: Set write-back cache and fua same to the target device block/rnbd: Fix typos block/rnbd-srv: Protect dev session sysfs removal block/rnbd-clt: Fix possible memleak block/rnbd-clt: Get rid of warning regarding size argument in strlcpy blk-mq: Remove 'running from the wrong CPU' warning
2020-12-24Merge tag 'libnvdimm-for-5.11' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm Pull libnvdimm updates from Dan Williams: "Twas the day before Christmas and the only thing stirring in libnvdimm / device-dax land is a pile of miscellaneous fixups and cleanups. The bulk of it has appeared in -next save the last two patches to device-dax that have passed my build and unit tests. - Fix a long standing block-window-namespace issue surfaced by the ndctl change to attempt to preserve the kernel device name over a 'reconfigure' - Fix a few error path memory leaks in nfit and device-dax - Silence a smatch warning in the ioctl path - Miscellaneous cleanups" * tag 'libnvdimm-for-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: device-dax: Avoid an unnecessary check in alloc_dev_dax_range() device-dax: Fix range release device-dax: delete a redundancy check in dev_dax_validate_align() libnvdimm/label: Return -ENXIO for no slot in __blk_label_update device-dax/core: Fix memory leak when rmmod dax.ko device-dax/pmem: Convert comma to semicolon libnvdimm: Cleanup include of badblocks.h ACPI: NFIT: Fix input validation of bus-family libnvdimm/namespace: Fix reaping of invalidated block-window-namespace labels ACPI/nfit: avoid accessing uninitialized memory in acpi_nfit_ctl()
2020-12-24Merge tag 'drm-next-2020-12-24' of git://anongit.freedesktop.org/drm/drmLinus Torvalds
Pull drm fixes from Dave Airlie: "Xmas eve pull request present. Just some fixes that trickled in this past week: Mostly amdgpu fixes, with a dma-buf/mips build fix and some misc komeda fixes. dma-buf: - fix build on mips komeda: - fix commit tail operation order - NULL pointer fix - out of bounds access fix ttm: - remove an unused function amdgpu: - Vangogh SMU fixes - Arcturus gfx9 fixes - Misc display fixes - Sienna Cichlid SMU update - Fix S3 display memory leak - Fix regression caused by DP sub-connector support amdkfd: - Properly require pcie atomics for gfx10" * tag 'drm-next-2020-12-24' of git://anongit.freedesktop.org/drm/drm: (31 commits) drm/amd/display: Fix memory leaks in S3 resume drm/amdgpu: Fix a copy-pasta comment drm/amdgpu: only set DP subconnector type on DP and eDP connectors drm/amd/pm: bump Sienna Cichlid smu_driver_if version to match latest pmfw drm/amd/display: add getter routine to retrieve mpcc mux drm/amd/display: always program DPPDTO unless not safe to lower drm/amd/display: [FW Promotion] Release 0.0.47 drm/amd/display: updated wm table for Renoir drm/amd/display: Acquire DSC during split stream for ODM only if top_pipe drm/amd/display: Multi-display underflow observed drm/amd/display: Remove unnecessary NULL check drm/amd/display: Update RN/VGH active display count workaround drm/amd/display: change SMU repsonse timeout to 2s. drm/amd/display: gradually ramp ABM intensity drm/amd/display: To modify the condition in indicating branch device drm/amd/display: Modify the hdcp device count check condition drm/amd/display: Interfaces for hubp blank and soft reset drm/amd/display: handler not correctly checked at remove_irq_handler drm/amdgpu: check gfx pipe availability before toggling its interrupts drm/amdgpu: remove unnecessary asic type check ...
2020-12-24Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds
Pull virtio updates from Michael Tsirkin: - vdpa sim refactoring - virtio mem: Big Block Mode support - misc cleanus, fixes * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (61 commits) vdpa: Use simpler version of ida allocation vdpa: Add missing comment for virtqueue count uapi: virtio_ids: add missing device type IDs from OASIS spec uapi: virtio_ids.h: consistent indentions vhost scsi: fix error return code in vhost_scsi_set_endpoint() virtio_ring: Fix two use after free bugs virtio_net: Fix error code in probe() virtio_ring: Cut and paste bugs in vring_create_virtqueue_packed() tools/virtio: add barrier for aarch64 tools/virtio: add krealloc_array tools/virtio: include asm/bug.h vdpa/mlx5: Use write memory barrier after updating CQ index vdpa: split vdpasim to core and net modules vdpa_sim: split vdpasim_virtqueue's iov field in out_iov and in_iov vdpa_sim: make vdpasim->buffer size configurable vdpa_sim: use kvmalloc to allocate vdpasim->buffer vdpa_sim: set vringh notify callback vdpa_sim: add set_config callback in vdpasim_dev_attr vdpa_sim: add get_config callback in vdpasim_dev_attr vdpa_sim: make 'config' generic and usable for any device type ...
2020-12-24Merge branch 'for-5.11/dax' into for-5.11/libnvdimmDan Williams
Pull in miscellaneous device-dax fixups and cleanups for v5.11.
2020-12-24device-dax: Avoid an unnecessary check in alloc_dev_dax_range()Zhen Lei
Swap the calling sequence of krealloc() and __request_region(), call the latter first. In this way, the value of dev_dax->nr_range does not need to be considered when __request_region() failed. Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Link: https://lore.kernel.org/r/20201219081840.1149-2-thunder.leizhen@huawei.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2020-12-24device-dax: Fix range releaseDan Williams
There are multiple locations that open-code the release of the last range in a device-dax instance. Consolidate this into a new dev_dax_trim_range() helper. This also addresses a kmemleak report: # cat /sys/kernel/debug/kmemleak [..] unreferenced object 0xffff976bd46f6240 (size 64): comm "ndctl", pid 23556, jiffies 4299514316 (age 5406.733s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 20 c3 37 00 00 00 .......... .7... ff ff ff 7f 38 00 00 00 00 00 00 00 00 00 00 00 ....8........... backtrace: [<00000000064003cf>] __kmalloc_track_caller+0x136/0x379 [<00000000d85e3c52>] krealloc+0x67/0x92 [<00000000d7d3ba8a>] __alloc_dev_dax_range+0x73/0x25c [<0000000027d58626>] devm_create_dev_dax+0x27d/0x416 [<00000000434abd43>] __dax_pmem_probe+0x1c9/0x1000 [dax_pmem_core] [<0000000083726c1c>] dax_pmem_probe+0x10/0x1f [dax_pmem] [<00000000b5f2319c>] nvdimm_bus_probe+0x9d/0x340 [libnvdimm] [<00000000c055e544>] really_probe+0x230/0x48d [<000000006cabd38e>] driver_probe_device+0x122/0x13b [<0000000029c7b95a>] device_driver_attach+0x5b/0x60 [<0000000053e5659b>] bind_store+0xb7/0xc3 [<00000000d3bdaadc>] drv_attr_store+0x27/0x31 [<00000000949069c5>] sysfs_kf_write+0x4a/0x57 [<000000004a8b5adf>] kernfs_fop_write+0x150/0x1e5 [<00000000bded60f0>] __vfs_write+0x1b/0x34 [<00000000b92900f0>] vfs_write+0xd8/0x1d1 Reported-by: Jane Chu <jane.chu@oracle.com> Cc: Zhen Lei <thunder.leizhen@huawei.com> Link: https://lore.kernel.org/r/160834570161.1791850.14911670304441510419.stgit@dwillia2-desk3.amr.corp.intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2020-12-24Merge tag 'amd-drm-fixes-5.11-2020-12-23' of ↵Dave Airlie
git://people.freedesktop.org/~agd5f/linux into drm-next amd-drm-fixes-5.11-2020-12-23: amdgpu: - Vangogh SMU fixes - Arcturus gfx9 fixes - Misc display fixes - Sienna Cichlid SMU update - Fix S3 display memory leak - Fix regression caused by DP sub-connector support amdkfd: - Properly require pcie atomics for gfx10 Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexdeucher@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201223204752.4019-1-alexander.deucher@amd.com
2020-12-24Merge tag 'drm-misc-next-fixes-2020-12-22' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-next Short summary of fixes pull: * dma-buf: Include <linux/vmalloc.h> for building on MIPS * komeda: Fix order of operation in commit tail; Fix NULL-pointer and out-of-bounds access; Cleanups * ttm: Fix an unused-function warning Signed-off-by: Dave Airlie <airlied@redhat.com> From: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/X+JFYlW1SEZa6ShA@linux-uq9g
2020-12-23e1000e: Export S0ix flags to ethtoolMario Limonciello
This flag can be used by an end user to disable S0ix flows on a buggy system or by an OEM for development purposes. If you need this flag to be persisted across reboots, it's suggested to use a udev rule to call adjust it until the kernel could have your configuration in a disallow list. Signed-off-by: Mario Limonciello <mario.limonciello@dell.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Tested-by: Yijun Shen <Yijun.shen@dell.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2020-12-23Revert "e1000e: disable s0ix entry and exit flows for ME systems"Mario Limonciello
commit e086ba2fccda ("e1000e: disable s0ix entry and exit flows for ME systems") disabled s0ix flows for systems that have various incarnations of the i219-LM ethernet controller. This changed caused power consumption regressions on the following shipping Dell Comet Lake based laptops: * Latitude 5310 * Latitude 5410 * Latitude 5410 * Latitude 5510 * Precision 3550 * Latitude 5411 * Latitude 5511 * Precision 3551 * Precision 7550 * Precision 7750 This commit was introduced because of some regressions on certain Thinkpad laptops. This comment was potentially caused by an earlier commit 632fbd5eb5b0e ("e1000e: fix S0ix flows for cable connected case"). or it was possibly caused by a system not meeting platform architectural requirements for low power consumption. Other changes made in the driver with extended timeouts are expected to make the driver more impervious to platform firmware behavior. Fixes: e086ba2fccda ("e1000e: disable s0ix entry and exit flows for ME systems") Reviewed-by: Alexander Duyck <alexander.duyck@gmail.com> Signed-off-by: Mario Limonciello <mario.limonciello@dell.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Tested-by: Yijun Shen <Yijun.shen@dell.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2020-12-23e1000e: bump up timeout to wait when ME un-configures ULP modeMario Limonciello
Per guidance from Intel ethernet architecture team, it may take up to 1 second for unconfiguring ULP mode. However in practice this seems to be taking up to 2 seconds on some Lenovo machines. Detect scenarios that take more than 1 second but less than 2.5 seconds and emit a warning on resume for those scenarios. Suggested-by: Aaron Ma <aaron.ma@canonical.com> Suggested-by: Sasha Netfin <sasha.neftin@intel.com> Suggested-by: Hans de Goede <hdegoede@redhat.com> CC: Mark Pearson <markpearson@lenovo.com> Fixes: f15bb6dde738cc8fa0 ("e1000e: Add support for S0ix") BugLink: https://bugs.launchpad.net/bugs/1865570 Link: https://patchwork.ozlabs.org/project/intel-wired-lan/patch/20200323191639.48826-1-aaron.ma@canonical.com/ Link: https://lkml.org/lkml/2020/12/13/15 Link: https://lkml.org/lkml/2020/12/14/708 Signed-off-by: Mario Limonciello <mario.limonciello@dell.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Tested-by: Yijun Shen <Yijun.shen@dell.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2020-12-23e1000e: Only run S0ix flows if shutdown succeededMario Limonciello
If the shutdown failed, the part will be thawed and running S0ix flows will put it into an undefined state. Reported-by: Alexander Duyck <alexander.duyck@gmail.com> Reviewed-by: Alexander Duyck <alexander.duyck@gmail.com> Signed-off-by: Mario Limonciello <mario.limonciello@dell.com> Tested-by: Yijun Shen <Yijun.shen@dell.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2020-12-23Merge tag 'tag-chrome-platform-for-v5.11' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux Pull chrome platform updates from Benson Leung: "cros_ec_typec: - A series from Prashant for Type-C to implement TYPEC_STATUS, parsing USB PD Partner ID VDOs, and registering partner altmodes. cros_ec misc: - Don't treat RTC events as wakeup sources in cros_ec_proto" * tag 'tag-chrome-platform-for-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux: platform/chrome: cros_ec_typec: Tolerate unrecognized mux flags platform/chrome: cros_ec_typec: Register partner altmodes platform/chrome: cros_ec_typec: Parse partner PD ID VDOs platform/chrome: cros_ec_typec: Introduce TYPEC_STATUS platform/chrome: cros_ec: Import Type C host commands platform/chrome: cros_ec_typec: Clear partner identity on device removal platform/chrome: cros_ec_typec: Fix remove partner logic platform/chrome: cros_ec_typec: Relocate set_port_params_v*() functions platform/chrome: Don't treat RTC events as wakeup sources
2020-12-23Merge tag 'linux-watchdog-5.11-rc1' of ↵Linus Torvalds
git://www.linux-watchdog.org/linux-watchdog Pull watchdog updates from Wim Van Sebroeck: - Removal of the pnx83xx driver - Add a binding for A100's watchdog controller - Add Rockchip compatibles to snps,dw-wdt.yaml - hpwdt: Disable NMI in Crash Kernel - Fix potential dereferencing of null pointer in watchdog_core - Several other small fixes and improvements * tag 'linux-watchdog-5.11-rc1' of git://www.linux-watchdog.org/linux-watchdog: (23 commits) watchdog: convert comma to semicolon watchdog: iTCO_wdt: use dev_*() instead of pr_*() for logging dt-binding: watchdog: add Rockchip compatibles to snps,dw-wdt.yaml watchdog: coh901327: add COMMON_CLK dependency dt-bindings: watchdog: sun4i: Add A100 compatible watchdog: qcom: Avoid context switch in restart handler watchdog: iTCO_wdt: use module_platform_device() macro watchdog: Fix potential dereferencing of null pointer watchdog: wdat_wdt: Fix missing kerneldoc reported by W=1 watchdog/hpwdt: Reflect changes watchdog/hpwdt: Disable NMI in Crash Kernel wdt: sp805: add watchdog_stop on reboot watchdog: sbc_fitpc2_wdt: add __user annotations watchdog: geodewdt: remove unneeded break watchdog: rti-wdt: fix reference leak in rti_wdt_probe watchdog: qcom_wdt: set WDOG_HW_RUNNING bit when appropriate watchdog: remove pnx83xx driver watchdog: stm32_iwdg: don't print an error on probe deferral watchdog: sprd: change to use usleep_range() instead of busy loop watchdog: sprd: check busy bit before new loading rather than after that ...
2020-12-23ibmvnic: continue fatal error reset after passive initLijun Pan
Commit f9c6cea0b385 ("ibmvnic: Skip fatal error reset after passive init") says "If the passive CRQ initialization occurs before the FATAL reset task is processed, the FATAL error reset task would try to access a CRQ message queue that was freed, causing an oops. The problem may be most likely to occur during DLPAR add vNIC with a non-default MTU, because the DLPAR process will automatically issue a change MTU request. Fix this by not processing fatal error reset if CRQ is passively initialized after client-driven CRQ initialization fails." The original commit skips a specific reset condition, but that does not fix the problem it claims to fix, and misses a reset condition. The effective fix is commit 0e435befaea4 ("ibmvnic: fix NULL pointer dereference in ibmvic_reset_crq") and commit a0faaa27c716 ("ibmvnic: fix NULL pointer dereference in reset_sub_crq_queues"). With above two fixes, there are no more crashes seen as described even without the original commit, so I would like to revert the original commit. Fixes: f9c6cea0b385 ("ibmvnic: Skip fatal error reset after passive init") Signed-off-by: Lijun Pan <ljp@linux.ibm.com> Link: https://lore.kernel.org/r/20201223204904.12677-1-ljp@linux.ibm.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-23net: ethernet: Fix memleak in ethoc_probeDinghao Liu
When mdiobus_register() fails, priv->mdio allocated by mdiobus_alloc() has not been freed, which leads to memleak. Fixes: e7f4dc3536a4 ("mdio: Move allocation of interrupts into core") Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20201223110615.31389-1-dinghao.liu@zju.edu.cn Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-23net: ipa: use state to determine event ring command successAlex Elder
This patch implements the same basic fix for event rings as the previous one does for channels. The result of issuing an event ring control command should be that the event ring changes state. If enabled, a completion interrupt signals that the event ring state has changed. This interrupt is enabled by gsi_evt_ring_command() and disabled again after the command has completed (or we time out). There is a window of time during which the command could complete successfully without interrupting. This would cause the event ring to transition to the desired new state. So whether a event ring command ends via completion interrupt or timeout, we can consider the command successful if the event ring has entered the desired state (and a failure if it has not, regardless of the cause). Fixes: b4175f8731f78 ("net: ipa: only enable GSI event control IRQs when needed") Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-23net: ipa: use state to determine channel command successAlex Elder
The result of issuing a channel control command should be that the channel changes state. If enabled, a completion interrupt signals that the channel state has changed. This interrupt is enabled by gsi_channel_command() and disabled again after the command has completed (or we time out). There is a window of time--after the completion interrupt is disabled but before the channel state is read--during which the command could complete successfully without interrupting. This would cause the channel to transition to the desired new state. So whether a channel command ends via completion interrupt or timeout, we can consider the command successful if the channel has entered the desired state (and a failure if it has not, regardless of the cause). Fixes: d6c9e3f506ae8 ("net: ipa: only enable generic command completion IRQ when needed"); Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-23net: ipa: clear pending interrupts before enablingAlex Elder
We enable the completion interrupt for channel or event ring commands only when we issue them. The interrupt is disabled after the interrupt has fired, or after we have timed out waiting for it. If we time out, the command could complete after the interrupt has been disabled, causing a state change in the channel or event ring. The interrupt associated with that state change would be delivered the next time the completion interrupt is enabled. To avoid previous command completions interfering with new commands, clear all pending completion interrupts before re-enabling them for a new command. Fixes: b4175f8731f78 ("net: ipa: only enable GSI event control IRQs when needed") Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-23stmmac: intel: Add PCI IDs for TGL-H platformNoor Azura Ahmad Tarmizi
Add TGL-H PCI info and PCI IDs for the new TSN Controller to the list of supported devices. Signed-off-by: Noor Azura Ahmad Tarmizi <noor.azura.ahmad.tarmizi@intel.com> Signed-off-by: Voon Weifeng <weifeng.voon@intel.com> Signed-off-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com> Link: https://lore.kernel.org/r/20201222160337.30870-1-muhammad.husaini.zulkifli@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-23drm/amd/display: Fix memory leaks in S3 resumeStylon Wang
EDID parsing in S3 resume pushes new display modes to probed_modes list but doesn't consolidate to actual mode list. This creates a race condition when amdgpu_dm_connector_ddc_get_modes() re-initializes the list head without walking the list and results in memory leak. Bug: https://bugzilla.kernel.org/show_bug.cgi?id=209987 Acked-by: Harry Wentland <harry.wentland@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Stylon Wang <stylon.wang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2020-12-23drm/amdgpu: Fix a copy-pasta commentAlex Deucher
This is not a scsi driver. Reviewed-by: Nirmoy Das <nirmoy.das@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-12-23drm/amdgpu: only set DP subconnector type on DP and eDP connectorsAlex Deucher
Fixes a crash in drm_object_property_set_value() because the property is not set for internal DP ports that connect to a bridge chips (e.g., DP to VGA or DP to LVDS). Bug: https://bugzilla.kernel.org/show_bug.cgi?id=210739 Fixes: 65bf2cf95d3ade ("drm/amdgpu: utilize subconnector property for DP through atombios") Tested-By: Kris Karas <bugs-a17@moonlit-rail.com> Cc: Oleg Vasilev <oleg.vasilev@intel.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 5.10.x
2020-12-23drm/amd/pm: bump Sienna Cichlid smu_driver_if version to match latest pmfwEvan Quan
This can suppress the annoying but unharmful prompts. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Guchun Chen <guchun.chen@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-12-23drm/amd/display: add getter routine to retrieve mpcc muxJosip Pavic
[Why & How] Add function to identify which MPCC is providing input to a specified OPP Signed-off-by: Josip Pavic <Josip.Pavic@amd.com> Acked-by: Bindu Ramamurthy <bindu.r@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-12-23drm/amd/display: always program DPPDTO unless not safe to lowerJake Wang
[Why] We defer clock updates to after pipes have been programmed. In some instances we use DPPCLK that have been previously set to be "unused". This results in a brief window of time where underflow could occur. [How] During prepare bandwidth allow rn_update_clocks_update_dpp_dto to check each instance and compare previous clock to new clock. If new clock is higher than previous clock, program DPPDTO. Signed-off-by: Jake Wang <haonan.wang2@amd.com> Acked-by: Bindu Ramamurthy <bindu.r@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit (git 2.34.1) at 2025-09-11 23:31:18 +0000