summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2023-03-09serial: qcom-geni: fix mapping of empty DMA bufferJohan Hovold
Make sure that there is data in the ring buffer before trying to set up a zero-length DMA transfer. This specifically fixes the following warning when unmapping the empty buffer on the sc8280xp-crd: WARNING: CPU: 0 PID: 138 at drivers/iommu/dma-iommu.c:1046 iommu_dma_unmap_page+0xbc/0xd8 ... Call trace: iommu_dma_unmap_page+0xbc/0xd8 dma_unmap_page_attrs+0x30/0x1c8 geni_se_tx_dma_unprep+0x28/0x38 qcom_geni_serial_isr+0x358/0x75c Fixes: 2aaa43c70778 ("tty: serial: qcom-geni-serial: add support for serial engine DMA") Cc: stable <stable@kernel.org> Cc: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Tested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Reviewed-by: Andrew Halaney <ahalaney@redhat.com> Tested-by: Andrew Halaney <ahalaney@redhat.com> # sa8540p-ride Link: https://lore.kernel.org/r/20230307164405.14218-4-johan+linaro@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-09serial: qcom-geni: fix DMA mapping leak on shutdownJohan Hovold
Fix what appears to be a copy-paste error that can lead to a leaked DMA mapping on close() and failure to restart TX after the port is reopened. Note that rx_dma_addr is generally NULL when qcom_geni_serial_stop_tx_dma() is called as part of shutdown() (but tx_dma_addr need not be). Fixes: 2aaa43c70778 ("tty: serial: qcom-geni-serial: add support for serial engine DMA") Cc: stable <stable@kernel.org> Cc: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Tested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Reviewed-by: Andrew Halaney <ahalaney@redhat.com> Tested-by: Andrew Halaney <ahalaney@redhat.com> # sa8540p-ride Link: https://lore.kernel.org/r/20230307164405.14218-3-johan+linaro@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-09serial: qcom-geni: fix console shutdown hangJohan Hovold
A recent commit added back the calls top stop tx and rx to shutdown() which had previously been removed by commit e83766334f96 ("tty: serial: qcom_geni_serial: No need to stop tx/rx on UART shutdown") in order to be able to use kgdb after stopping the getty. Not only did this again break kgdb, but it also broke serial consoles more generally by hanging TX when stopping the getty during reboot. The underlying problem has been there since the driver was first merged and fixing it is going to be a bit involved so simply stop calling the broken stop functions during shutdown for consoles for now. Fixes: d8aca2f96813 ("tty: serial: qcom-geni-serial: stop operations in progress at shutdown") Cc: stable <stable@kernel.org> Cc: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Tested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Reviewed-by: Andrew Halaney <ahalaney@redhat.com> Tested-by: Andrew Halaney <ahalaney@redhat.com> # sa8540p-ride Link: https://lore.kernel.org/r/20230307164405.14218-2-johan+linaro@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-09serdev: Set fwnode for serdev devicesSaravana Kannan
This allow fw_devlink to do dependency tracking for serdev devices. Reported-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/lkml/03b70a8a-0591-f28b-a567-9d2f736f17e5@gmail.com/ Cc: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: Saravana Kannan <saravanak@google.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Tested-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20230302023509.319903-1-saravanak@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-09tty: serial: fsl_lpuart: fix race on RX DMA shutdownAlexander Sverdlin
From time to time DMA completion can come in the middle of DMA shutdown: <process ctx>: <IRQ>: lpuart32_shutdown() lpuart_dma_shutdown() del_timer_sync() lpuart_dma_rx_complete() lpuart_copy_rx_to_tty() mod_timer() lpuart_dma_rx_free() When the timer fires a bit later, sport->dma_rx_desc is NULL: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000004 pc : lpuart_copy_rx_to_tty+0xcc/0x5bc lr : lpuart_timer_func+0x1c/0x2c Call trace: lpuart_copy_rx_to_tty lpuart_timer_func call_timer_fn __run_timers.part.0 run_timer_softirq __do_softirq __irq_exit_rcu irq_exit handle_domain_irq gic_handle_irq call_on_irq_stack do_interrupt_handler ... To fix this fold del_timer_sync() into lpuart_dma_rx_free() after dmaengine_terminate_sync() to make sure timer will not be re-started in lpuart_copy_rx_to_tty() <= lpuart_dma_rx_complete(). Fixes: 4a8588a1cf86 ("serial: fsl_lpuart: delete timer on shutdown") Cc: stable <stable@kernel.org> Signed-off-by: Alexander Sverdlin <alexander.sverdlin@siemens.com> Link: https://lore.kernel.org/r/20230309134302.74940-2-alexander.sverdlin@siemens.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-09serial: 8250_pci1xxxx: Disable SERIAL_8250_PCI1XXXX config by defaultKumaravel Thiagarajan
Commit 32bb477fa7bf ("serial: 8250_pci1xxxx: Add driver for quad-uart support") made the SERIAL_8250_PCI1XXXX driver enabled when SERIAL_8250 is enabled, disable it as this driver does not need to be enabled by default Fixes: 32bb477fa7bf ("serial: 8250_pci1xxxx: Add driver for quad-uart support") Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Link: https://lore.kernel.org/lkml/CAHk-=whhFCeeuo6vTEmNSx6S-KKkugxgzN_W5Z6v-9yH9gc3Zw@mail.gmail.com/ Signed-off-by: Kumaravel Thiagarajan <kumaravel.thiagarajan@microchip.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20230305145124.13444-1-kumaravel.thiagarajan@microchip.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-09serial: 8250_fsl: fix handle_irq lockingJohan Hovold
The 8250 handle_irq callback is not just called from the interrupt handler but also from a timer callback when polling (e.g. for ports without an interrupt line). Consequently the callback must explicitly disable interrupts to avoid a potential deadlock with another interrupt in polled mode. Fix up the two paths in the freescale callback that failed to re-enable interrupts when polling. Fixes: 853a9ae29e97 ("serial: 8250: fix handle_irq locking") Cc: stable@vger.kernel.org # 5.13 Reported-by: Dan Carpenter <error27@gmail.com> Link: https://lore.kernel.org/r/Y/xYzqp4ogmOF5t0@kili Signed-off-by: Johan Hovold <johan@kernel.org> Acked-by: Jiri Slaby <jirislaby@kernel.org> Link: https://lore.kernel.org/r/20230227085046.24282-1-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-09serial: 8250_em: Fix UART port typeBiju Das
As per HW manual for EMEV2 "R19UH0040EJ0400 Rev.4.00", the UART IP found on EMMA mobile SoC is Register-compatible with the general-purpose 16750 UART chip. Fix UART port type as 16750 and enable 64-bytes fifo support. Fixes: 22886ee96895 ("serial8250-em: Emma Mobile UART driver V2") Cc: stable@vger.kernel.org Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20230227114152.22265-2-biju.das.jz@bp.renesas.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-09serial: 8250: ASPEED_VUART: select REGMAP instead of depending on itRandy Dunlap
REGMAP is a hidden (not user visible) symbol. Users cannot set it directly thru "make *config", so drivers should select it instead of depending on it if they need it. Consistently using "select" or "depends on" can also help reduce Kconfig circular dependency issues. Therefore, change the use of "depends on REGMAP" to "select REGMAP". Fixes: 8d310c9107a2 ("drivers/tty/serial/8250: Make Aspeed VUART SIRQ polarity configurable") Cc: stable <stable@kernel.org> Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Oskar Senft <osk@google.com> Cc: linux-serial@vger.kernel.org Link: https://lore.kernel.org/r/20230226053953.4681-9-rdunlap@infradead.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-09tty: serial: fsl_lpuart: skip waiting for transmission complete when ↵Sherry Sun
UARTCTRL_SBK is asserted According to LPUART RM, Transmission Complete Flag becomes 0 if queuing a break character by writing 1 to CTRL[SBK], so here need to skip waiting for transmission complete when UARTCTRL_SBK is asserted, otherwise the kernel may stuck here. And actually set_termios() adds transmission completion waiting to avoid data loss or data breakage when changing the baud rate, but we don't need to worry about this when queuing break characters. Signed-off-by: Sherry Sun <sherry.sun@nxp.com> Cc: stable <stable@kernel.org> Link: https://lore.kernel.org/r/20230223093941.31790-1-sherry.sun@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-09Revert "tty: serial: fsl_lpuart: adjust SERIAL_FSL_LPUART_CONSOLE config ↵Tom Rix
dependency" This reverts commit 5779a072c248db7a40cfd0f5ea958097fd1d9a30. This results in a link error of ld: drivers/tty/serial/earlycon.o: in function `parse_options': drivers/tty/serial/earlycon.c:99: undefined reference to `uart_parse_earlycon' When the config is in this state CONFIG_SERIAL_CORE=m CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_SERIAL_EARLYCON=y CONFIG_SERIAL_FSL_LPUART=m CONFIG_SERIAL_FSL_LPUART_CONSOLE=y Fixes: 5779a072c248 ("tty: serial: fsl_lpuart: adjust SERIAL_FSL_LPUART_CONSOLE config dependency") Cc: stable <stable@kernel.org> Signed-off-by: Tom Rix <trix@redhat.com> Reviewed-by: Randy Dunlap <rdunlap@infradead.org> Acked-by: Jiri Slaby <jirislaby@kernel.org> Link: https://lore.kernel.org/r/20230226173846.236691-1-trix@redhat.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-09dm crypt: avoid accessing uninitialized taskletMike Snitzer
When neither "no_read_workqueue" nor "no_write_workqueue" are enabled, tasklet_trylock() in crypt_dec_pending() may still return false due to an uninitialized state, and dm-crypt will unnecessarily do io completion in io_queue workqueue instead of current context. Fix this by adding an 'in_tasklet' flag to dm_crypt_io struct and initialize it to false in crypt_io_init(). Set this flag to true in kcryptd_queue_crypt() before calling tasklet_schedule(). If set crypt_dec_pending() will punt io completion to a workqueue. This also nicely avoids the tasklet_trylock/unlock hack when tasklets aren't in use. Fixes: 8e14f610159d ("dm crypt: do not call bio_endio() from the dm-crypt tasklet") Cc: stable@vger.kernel.org Reported-by: Hou Tao <houtao1@huawei.com> Suggested-by: Ignat Korchagin <ignat@cloudflare.com> Reviewed-by: Ignat Korchagin <ignat@cloudflare.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2023-03-09usb: dwc2: drd: fix inconsistent mode if role-switch-default-mode="host"Ziyang Huang
Some boards might use USB-A female connector for USB ports, however, the port could be connected to a dual-mode USB controller, making it also behaves as a peripheral device if male-to-male cable is connected. In this case, the dts looks like this: &usb0 { status = "okay"; dr_mode = "otg"; usb-role-switch; role-switch-default-mode = "host"; }; After boot, dwc2_ovr_init() sets GOTGCTL to GOTGCTL_AVALOVAL and call dwc2_force_mode() with parameter host=false, which causes inconsistent mode - The hardware is in peripheral mode while the kernel status is in host mode. What we can do now is to call dwc2_drd_role_sw_set() to switch to device mode, and everything should work just fine now, even switching back to none(default) mode afterwards. Fixes: e14acb876985 ("usb: dwc2: drd: add role-switch-default-node support") Cc: stable <stable@kernel.org> Signed-off-by: Ziyang Huang <hzyitc@outlook.com> Tested-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com> Acked-by: Minas Harutyunyan <hminas@synopsys.com> Reviewed-by: Amelie Delaunay <amelie.delaunay@foss.st.com> Link: https://lore.kernel.org/r/SG2PR01MB204837BF68EDB0E343D2A375C9A59@SG2PR01MB2048.apcprd01.prod.exchangelabs.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-09mmc: dw_mmc-starfive: Fix initialization of prev_errWilliam Qiu
Fix a bug by making sure prev_err doesn't get used when being uninitialized. Signed-off-by: William Qiu <william.qiu@starfivetech.com> Reported-by: Dan Carpenter <error27@gmail.com> Reviewed-by: Emil Renner Berthing <emil.renner.berthing@canonical.com> Fixes: 9e622229bbf4 ("mmc: starfive: Add sdio/emmc driver support") Link: https://lore.kernel.org/r/20230307024646.10216-3-william.qiu@starfivetech.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2023-03-09mmc: sdhci_am654: lower power-on failed message severityFrancesco Dolcini
Lower the power-on failed message severity from warn to info when the controller does not power-up. It's normal to have this situation when the SD card slot is empty, therefore we should not warn the user about it. Fixes: 7ca0f166f5b2 ("mmc: sdhci_am654: Add workaround for card detect debounce timer") Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20230306162751.163369-1-francesco@dolcini.it Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2023-03-09usb: typec: tcpm: fix warning when handle discover_identity messageXu Yang
Since both source and sink device can send discover_identity message in PD3, kernel may dump below warning: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 169 at drivers/usb/typec/tcpm/tcpm.c:1446 tcpm_queue_vdm+0xe0/0xf0 Modules linked in: CPU: 0 PID: 169 Comm: 1-0050 Not tainted 6.1.1-00038-g6a3c36cf1da2-dirty #567 Hardware name: NXP i.MX8MPlus EVK board (DT) pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : tcpm_queue_vdm+0xe0/0xf0 lr : tcpm_queue_vdm+0x2c/0xf0 sp : ffff80000c19bcd0 x29: ffff80000c19bcd0 x28: 0000000000000001 x27: ffff0000d11c8ab8 x26: ffff0000d11cc000 x25: 0000000000000000 x24: 00000000ff008081 x23: 0000000000000001 x22: 00000000ff00a081 x21: ffff80000c19bdbc x20: 0000000000000000 x19: ffff0000d11c8080 x18: ffffffffffffffff x17: 0000000000000000 x16: 0000000000000000 x15: ffff0000d716f580 x14: 0000000000000001 x13: ffff0000d716f507 x12: 0000000000000001 x11: 0000000000000000 x10: 0000000000000020 x9 : 00000000000ee098 x8 : 00000000ffffffff x7 : 000000000000001c x6 : ffff0000d716f580 x5 : 0000000000000000 x4 : 0000000000000000 x3 : 0000000000000000 x2 : ffff80000c19bdbc x1 : 00000000ff00a081 x0 : 0000000000000004 Call trace: tcpm_queue_vdm+0xe0/0xf0 tcpm_pd_rx_handler+0x340/0x1ab0 kthread_worker_fn+0xcc/0x18c kthread+0x10c/0x110 ret_from_fork+0x10/0x20 ---[ end trace 0000000000000000 ]--- Below sequences may trigger this warning: tcpm_send_discover_work(work) tcpm_send_vdm(port, USB_SID_PD, CMD_DISCOVER_IDENT, NULL, 0); tcpm_queue_vdm(port, header, data, count); port->vdm_state = VDM_STATE_READY; vdm_state_machine_work(work); <-- received discover_identity from partner vdm_run_state_machine(port); port->vdm_state = VDM_STATE_SEND_MESSAGE; mod_vdm_delayed_work(port, x); tcpm_pd_rx_handler(work); tcpm_pd_data_request(port, msg); tcpm_handle_vdm_request(port, msg->payload, cnt); tcpm_queue_vdm(port, response[0], &response[1], rlen - 1); --> WARN_ON(port->vdm_state > VDM_STATE_DONE); For this case, the state machine could still send out discover identity message later if we skip current discover_identity message. So we should handle the received message firstly and override the pending discover_identity message without warning in this case. Then, a delayed send_discover work will send discover_identity message again. Fixes: e00943e91678 ("usb: typec: tcpm: PD3.0 sinks can send Discover Identity even in device mode") cc: <stable@vger.kernel.org> Signed-off-by: Xu Yang <xu.yang_2@nxp.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20230216031515.4151117-1-xu.yang_2@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-09usb: typec: tcpm: fix create duplicate source-capabilities fileXu Yang
The kernel will dump in the below cases: sysfs: cannot create duplicate filename '/devices/virtual/usb_power_delivery/pd1/source-capabilities' 1. After soft reset has completed, an Explicit Contract negotiation occurs. The sink device will receive source capabilitys again. This will cause a duplicate source-capabilities file be created. 2. Power swap twice on a device that is initailly sink role. This will unregister existing capabilities when above cases occurs. Fixes: 8203d26905ee ("usb: typec: tcpm: Register USB Power Delivery Capabilities") cc: <stable@vger.kernel.org> Signed-off-by: Xu Yang <xu.yang_2@nxp.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20230215054951.238394-1-xu.yang_2@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-09usb: gadget: u_audio: don't let userspace block driver unbindAlvin Šipraga
In the unbind callback for f_uac1 and f_uac2, a call to snd_card_free() via g_audio_cleanup() will disconnect the card and then wait for all resources to be released, which happens when the refcount falls to zero. Since userspace can keep the refcount incremented by not closing the relevant file descriptor, the call to unbind may block indefinitely. This can cause a deadlock during reboot, as evidenced by the following blocked task observed on my machine: task:reboot state:D stack:0 pid:2827 ppid:569 flags:0x0000000c Call trace: __switch_to+0xc8/0x140 __schedule+0x2f0/0x7c0 schedule+0x60/0xd0 schedule_timeout+0x180/0x1d4 wait_for_completion+0x78/0x180 snd_card_free+0x90/0xa0 g_audio_cleanup+0x2c/0x64 afunc_unbind+0x28/0x60 ... kernel_restart+0x4c/0xac __do_sys_reboot+0xcc/0x1ec __arm64_sys_reboot+0x28/0x30 invoke_syscall+0x4c/0x110 ... The issue can also be observed by opening the card with arecord and then stopping the process through the shell before unbinding: # arecord -D hw:UAC2Gadget -f S32_LE -c 2 -r 48000 /dev/null Recording WAVE '/dev/null' : Signed 32 bit Little Endian, Rate 48000 Hz, Stereo ^Z[1]+ Stopped arecord -D hw:UAC2Gadget -f S32_LE -c 2 -r 48000 /dev/null # echo gadget.0 > /sys/bus/gadget/drivers/configfs-gadget/unbind (observe that the unbind command never finishes) Fix the problem by using snd_card_free_when_closed() instead, which will still disconnect the card as desired, but defer the task of freeing the resources to the core once userspace closes its file descriptor. Fixes: 132fcb460839 ("usb: gadget: Add Audio Class 2.0 Driver") Cc: stable@vger.kernel.org Signed-off-by: Alvin Šipraga <alsi@bang-olufsen.dk> Reviewed-by: Ruslan Bilovol <ruslan.bilovol@gmail.com> Reviewed-by: John Keeping <john@metanate.com> Link: https://lore.kernel.org/r/20230302163648.3349669-1-alvin@pqrs.dk Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-09usb: misc: onboard-hub: add support for Microchip USB2517 USB 2.0 hubAlexander Stein
Add support for Microchip USB2517 USB 2.0 hub to the onboard usb hub driver. Adopt the generic usb-device compatible ("usbVID,PID"). This hub has the same reset timings as USB2514, so reuse that one. There is also an USB2517I which just has industrial temperature range. Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Cc: stable <stable@kernel.org> Acked-by: Matthias Kaehlcke <mka@chromium.org> Link: https://lore.kernel.org/r/20230223073920.2912298-1-alexander.stein@ew.tq-group.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-09usb: dwc3: gadget: Add 1ms delay after end transfer command without IOCWesley Cheng
Previously, there was a 100uS delay inserted after issuing an end transfer command for specific controller revisions. This was due to the fact that there was a GUCTL2 bit field which enabled synchronous completion of the end transfer command once the CMDACT bit was cleared in the DEPCMD register. Since this bit does not exist for all controller revisions and the current implementation heavily relies on utizling the EndTransfer command completion interrupt, add the delay back in for uses where the interrupt on completion bit is not set, and increase the duration to 1ms for the controller to complete the command. An issue was seen where the USB request buffer was unmapped while the DWC3 controller was still accessing the TRB. However, it was confirmed that the end transfer command was successfully submitted. (no end transfer timeout) In situations, such as dwc3_gadget_soft_disconnect() and __dwc3_gadget_ep_disable(), the dwc3_remove_request() is utilized, which will issue the end transfer command, and follow up with dwc3_gadget_giveback(). At least for the USB ep disable path, it is required for any pending and started requests to be completed and returned to the function driver in the same context of the disable call. Without the GUCTL2 bit, it is not ensured that the end transfer is completed before the buffers are unmapped. Fixes: cf2f8b63f7f1 ("usb: dwc3: gadget: Remove END_TRANSFER delay") Cc: stable <stable@kernel.org> Signed-off-by: Wesley Cheng <quic_wcheng@quicinc.com> Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/20230306200557.29387-1-quic_wcheng@quicinc.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-09usb: dwc3: Fix a typo in field nameVincenzo Palazzo
Fix a typo inside the dwc3 struct docs. Fixes: 63d7f9810a38 ("usb: dwc3: core: Enable GUCTL1 bit 10 for fixing termination error after resume bug") Signed-off-by: Vincenzo Palazzo <vincenzopalazzodev@gmail.com> Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/20230302150706.229008-1-vincenzopalazzodev@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-09usb: ucsi_acpi: Increase the command completion timeoutHans de Goede
Commit 130a96d698d7 ("usb: typec: ucsi: acpi: Increase command completion timeout value") increased the timeout from 5 seconds to 60 seconds due to issues related to alternate mode discovery. After the alternate mode discovery switch to polled mode the timeout was reduced, but instead of being set back to 5 seconds it was reduced to 1 second. This is causing problems when using a Lenovo ThinkPad X1 yoga gen7 connected over Type-C to a LG 27UL850-W (charging DP over Type-C). When the monitor is already connected at boot the following error is logged: "PPM init failed (-110)", /sys/class/typec is empty and on unplugging the NULL pointer deref fixed earlier in this series happens. When the monitor is connected after boot the following error is logged instead: "GET_CONNECTOR_STATUS failed (-110)". Setting the timeout back to 5 seconds fixes both cases. Fixes: e08065069fc7 ("usb: typec: ucsi: acpi: Reduce the command completion timeout") Cc: stable@vger.kernel.org Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20230308154244.722337-4-hdegoede@redhat.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-09usb: ucsi: Fix ucsi->connector raceHans de Goede
ucsi_init() which runs from a workqueue sets ucsi->connector and on an error will clear it again. ucsi->connector gets dereferenced by ucsi_resume(), this checks for ucsi->connector being NULL in case ucsi_init() has not finished yet; or in case ucsi_init() has failed. ucsi_init() setting ucsi->connector and then clearing it again on an error creates a race where the check in ucsi_resume() may pass, only to have ucsi->connector free-ed underneath it when ucsi_init() hits an error. Fix this race by making ucsi_init() store the connector array in a local variable and only assign it to ucsi->connector on success. Fixes: bdc62f2bae8f ("usb: typec: ucsi: Simplified registration and I/O API") Cc: stable@vger.kernel.org Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20230308154244.722337-3-hdegoede@redhat.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-09usb: ucsi: Fix NULL pointer deref in ucsi_connector_change()Hans de Goede
When ucsi_init() fails, ucsi->connector is NULL, yet in case of ucsi_acpi we may still get events which cause the ucs_acpi code to call ucsi_connector_change(), which then derefs the NULL ucsi->connector pointer. Fix this by not setting ucsi->ntfy inside ucsi_init() until ucsi_init() has succeeded, so that ucsi_connector_change() ignores the events because UCSI_ENABLE_NTFY_CONNECTOR_CHANGE is not set in the ntfy mask. Fixes: bdc62f2bae8f ("usb: typec: ucsi: Simplified registration and I/O API") Link: https://bugzilla.kernel.org/show_bug.cgi?id=217106 Cc: stable@vger.kernel.org Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20230308154244.722337-2-hdegoede@redhat.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-09Merge branch '100GbE' of ↵Paolo Abeni
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2023-03-07 (ice) This series contains updates to ice driver only. Dave removes masking from pfcena field as it was incorrectly preventing valid traffic classes from being enabled. Michal resolves various smatch issues such as not propagating error codes and returning 0 explicitly. Arnd Bergmann resolves gcc-9 warning for integer overflow. * '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue: ethernet: ice: avoid gcc-9 integer overflow warning ice: don't ignore return codes in VSI related code ice: Fix DSCP PFC TLV creation ==================== Link: https://lore.kernel.org/r/20230307220714.3997294-1-anthony.l.nguyen@intel.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-03-09staging: r8188eu: delete driverGreg Kroah-Hartman
Now that the same hardware that the r8188eu driver supported is supported by the real wireless driver rtl8xxxu, the r8188eu driver can be deleted. Also the rtl8xxxu driver supports way more devices, and is a fraction of the overall size, making this a much better overall solution. Thanks to the r8188eu developers and maintainers and reviewers over the years, your work allowed Linux users to use their hardware before the real driver was implemented properly. Reported-by: Hans de Goede <hdegoede@redhat.com> Cc: Phillip Potter <phil@philpotter.co.uk> Cc: Pavel Skripkin <paskripkin@gmail.com> Acked-by: Larry Finger <LarryFinger@lwfinger.net> Acked-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Martin Kaiser <martin@kaiser.cx> Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150 Acked-by: Michael Straube <straube.linux@gmail.com> Link: https://lore.kernel.org/r/20230308131934.380395-1-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-08eth: fealnx: bring back this old driverJakub Kicinski
This reverts commit d5e2d038dbece821f1af57acbeded3aa9a1832c1. We have a report of this chip being used on a SURECOM EP-320X-S 100/10M Ethernet PCI Adapter which could still have been purchased in some parts of the world 3 years ago. Cc: stable@vger.kernel.org Link: https://bugzilla.kernel.org/show_bug.cgi?id=217151 Fixes: d5e2d038dbec ("eth: fealnx: delete the driver for Myson MTD-800") Link: https://lore.kernel.org/r/20230307171930.4008454-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-08net: dsa: mt7530: permit port 5 to work without port 6 on MT7621 SoCVladimir Oltean
The MT7530 switch from the MT7621 SoC has 2 ports which can be set up as internal: port 5 and 6. Arınç reports that the GMAC1 attached to port 5 receives corrupted frames, unless port 6 (attached to GMAC0) has been brought up by the driver. This is true regardless of whether port 5 is used as a user port or as a CPU port (carrying DSA tags). Offline debugging (blind for me) which began in the linked thread showed experimentally that the configuration done by the driver for port 6 contains a step which is needed by port 5 as well - the write to CORE_GSWPLL_GRP2 (note that I've no idea as to what it does, apart from the comment "Set core clock into 500Mhz"). Prints put by Arınç show that the reset value of CORE_GSWPLL_GRP2 is RG_GSWPLL_POSDIV_500M(1) | RG_GSWPLL_FBKDIV_500M(40) (0x128), both on the MCM MT7530 from the MT7621 SoC, as well as on the standalone MT7530 from MT7623NI Bananapi BPI-R2. Apparently, port 5 on the standalone MT7530 can work under both values of the register, while on the MT7621 SoC it cannot. The call path that triggers the register write is: mt753x_phylink_mac_config() for port 6 -> mt753x_pad_setup() -> mt7530_pad_clk_setup() so this fully explains the behavior noticed by Arınç, that bringing port 6 up is necessary. The simplest fix for the problem is to extract the register writes which are needed for both port 5 and 6 into a common mt7530_pll_setup() function, which is called at mt7530_setup() time, immediately after switch reset. We can argue that this mirrors the code layout introduced in mt7531_setup() by commit 42bc4fafe359 ("net: mt7531: only do PLL once after the reset"), in that the PLL setup has the exact same positioning, and further work to consolidate the separate setup() functions is not hindered. Testing confirms that: - the slight reordering of writes to MT7530_P6ECR and to CORE_GSWPLL_GRP1 / CORE_GSWPLL_GRP2 introduced by this change does not appear to cause problems for the operation of port 6 on MT7621 and on MT7623 (where port 5 also always worked) - packets sent through port 5 are not corrupted anymore, regardless of whether port 6 is enabled by phylink or not (or even present in the device tree) My algorithm for determining the Fixes: tag is as follows. Testing shows that some logic from mt7530_pad_clk_setup() is needed even for port 5. Prior to commit ca366d6c889b ("net: dsa: mt7530: Convert to PHYLINK API"), a call did exist for all phy_is_pseudo_fixed_link() ports - so port 5 included. That commit replaced it with a temporary "Port 5 is not supported!" comment, and the following commit 38f790a80560 ("net: dsa: mt7530: Add support for port 5") replaced that comment with a configuration procedure in mt7530_setup_port5() which was insufficient for port 5 to work. I'm laying the blame on the patch that claimed support for port 5, although one would have also needed the change from commit c3b8e07909db ("net: dsa: mt7530: setup core clock even in TRGMII mode") for the write to be performed completely independently from port 6's configuration. Thanks go to Arınç for describing the problem, for debugging and for testing. Reported-by: Arınç ÜNAL <arinc.unal@arinc9.com> Link: https://lore.kernel.org/netdev/f297c2c4-6e7c-57ac-2394-f6025d309b9d@arinc9.com/ Fixes: 38f790a80560 ("net: dsa: mt7530: Add support for port 5") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Tested-by: Arınç ÜNAL <arinc.unal@arinc9.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/20230307155411.868573-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-08Merge tag 'platform-drivers-x86-v6.3-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86 Pull x86 platform driver fixes from Hans de Goede: "A small set of assorted bug and build/warning fixes" * tag 'platform-drivers-x86-v6.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: platform: mellanox: mlx-platform: Initialize shift variable to 0 platform/x86: int3472: Add GPIOs to Surface Go 3 Board data platform/x86: ISST: Fix kernel documentation warnings platform: x86: MLX_PLATFORM: select REGMAP instead of depending on it platform: mellanox: select REGMAP instead of depending on it platform/x86/intel/tpmi: Fix double free reported by Smatch platform/x86: ISST: Increase range of valid mail box commands platform/x86: dell-ddv: Fix temperature scaling platform/x86: dell-ddv: Fix cache invalidation on resume platform/x86/amd: pmc: remove CONFIG_SUSPEND checks
2023-03-08drm/msm: DEVFREQ_GOV_SIMPLE_ONDEMAND is no longer neededRandy Dunlap
DRM_MSM no longer needs DEVFREQ_GOV_SIMPLE_ONDEMAND (since commit dbd7a2a941b8 ("PM / devfreq: Fix build issues with devfreq disabled") in linux-next), so remove that select from the DRM_MSM Kconfig file. Fixes: 6563f60f14cb ("drm/msm/gpu: Add devfreq tuning debugfs") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Rob Clark <robdclark@gmail.com> Cc: Abhinav Kumar <quic_abhinavk@quicinc.com> Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Cc: Sean Paul <sean@poorly.run> Cc: David Airlie <airlied@gmail.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: linux-arm-msm@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Cc: freedreno@lists.freedesktop.org Reviewed-by: Rob Clark <robdclark@gmail.com> Patchwork: https://patchwork.freedesktop.org/patch/523353/ Link: https://lore.kernel.org/r/20230220010428.16910-1-rdunlap@infradead.org [rob: tweak commit message to make checkpatch.pl happy] Signed-off-by: Rob Clark <robdclark@chromium.org>
2023-03-08staging: rtl8723bs: Pass correct parameters to cfg80211_get_bss()Hans de Goede
To last 2 parameters to cfg80211_get_bss() should be of the enum ieee80211_bss_type resp. enum ieee80211_privacy types, which WLAN_CAPABILITY_ESS very much is not. Fix both cfg80211_get_bss() calls in ioctl_cfg80211.c to pass the right parameters. Note that the second call was already somewhat fixed by commenting out WLAN_CAPABILITY_ESS and passing in 0 instead. This was still not entirely correct though since that would limit returned BSS-es to ESS type BSS-es with privacy on. Cc: stable@vger.kernel.org Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20230306153512.162104-2-hdegoede@redhat.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-08staging: rtl8723bs: Fix key-store index handlingHans de Goede
There are 2 issues with the key-store index handling 1. The non WEP key stores can store keys with indexes 0 - BIP_MAX_KEYID, this means that they should be an array with BIP_MAX_KEYID + 1 entries. But some of the arrays where just BIP_MAX_KEYID entries big. While one other array was hardcoded to a size of 6 entries, instead of using the BIP_MAX_KEYID define. 2. The rtw_cfg80211_set_encryption() and wpa_set_encryption() functions index check where checking that the passed in key-index would fit inside both the WEP key store (which only has 4 entries) as well as in the non WEP key stores. This breaks any attempts to set non WEP keys with index 4 or 5. Issue 2. specifically breaks wifi connection with some access points which advertise PMF support. Without this fix connecting to these access points fails with the following wpa_supplicant messages: nl80211: kernel reports: key addition failed wlan0: WPA: Failed to configure IGTK to the driver wlan0: RSN: Failed to configure IGTK wlan0: CTRL-EVENT-DISCONNECTED bssid=... reason=1 locally_generated=1 Fix 1. by using the right size for the key-stores. After this 2. can safely be fixed by checking the right max-index value depending on the used algorithm, fixing wifi not working with some PMF capable APs. Cc: stable@vger.kernel.org Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20230306153512.162104-1-hdegoede@redhat.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-08staging: rtl8192e: Remove call_usermodehelper starting RadioPower.shPhilipp Hortmann
Remove call_usermodehelper starting /etc/acpi/events/RadioPower.sh that is not available. This script is not part of the kernel and it is not officially available on the www. The result is that this lines are just dead code. Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> Cc: stable <stable@kernel.org> Link: https://lore.kernel.org/r/20230301215441.GA14049@matrix-ESPRIMO-P710 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-08staging: rtl8192e: Remove function ..dm_check_ac_dc_power calling a scriptPhilipp Hortmann
Remove function _rtl92e_dm_check_ac_dc_power calling a script /etc/acpi/wireless-rtl-ac-dc-power.sh that is not available. This script is not part of the kernel and it is not available on the www. The result is that this function is just dead code. Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> Cc: stable <stable@kernel.org> Link: https://lore.kernel.org/r/20230228202857.GA16442@matrix-ESPRIMO-P710 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-08firmware: arm_scmi: Use the bitmap API to allocate bitmapsChristophe JAILLET
Use devm_bitmap_zalloc() instead of hand-writing them. It is less verbose and it improves the semantic. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Cristian Marussi <cristian.marussi@arm.com> Tested-by: Cristian Marussi <cristian.marussi@arm.com> Link: https://lore.kernel.org/r/c073b1607ada34d5bde6ce1009179cf15bbf0da3.1657308593.git.christophe.jaillet@wanadoo.fr Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2023-03-08firmware: arm_scmi: Fix device node validation for mailbox transportCristian Marussi
When mailboxes are used as a transport it is possible to setup the SCMI transport layer, depending on the underlying channels configuration, to use one or two mailboxes, associated, respectively, to one or two, distinct, shared memory areas: any other combination should be treated as invalid. Add more strict checking of SCMI mailbox transport device node descriptors. Fixes: 5c8a47a5a91d ("firmware: arm_scmi: Make scmi core independent of the transport type") Cc: <stable@vger.kernel.org> # 4.19 Signed-off-by: Cristian Marussi <cristian.marussi@arm.com> Link: https://lore.kernel.org/r/20230307162324.891866-1-cristian.marussi@arm.com Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2023-03-08net: microchip: sparx5: fix deletion of existing DSCP mappingsDaniel Machon
Fix deletion of existing DSCP mappings in the APP table. Adding and deleting DSCP entries are replicated per-port, since the mapping table is global for all ports in the chip. Whenever a mapping for a DSCP value already exists, the old mapping is deleted first. However, it is only deleted for the specified port. Fix this by calling sparx5_dcb_ieee_delapp() instead of dcb_ieee_delapp() as it ought to be. Reproduce: // Map and remap DSCP value 63 $ dcb app add dev eth0 dscp-prio 63:1 $ dcb app add dev eth0 dscp-prio 63:2 $ dcb app show dev eth0 dscp-prio dscp-prio 63:2 $ dcb app show dev eth1 dscp-prio dscp-prio 63:1 63:2 <-- 63:1 should not be there Fixes: 8dcf69a64118 ("net: microchip: sparx5: add support for offloading dscp table") Signed-off-by: Daniel Machon <daniel.machon@microchip.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-08octeontx2-af: Unlock contexts in the queue context cache in case of fault ↵Suman Ghosh
detection NDC caches contexts of frequently used queue's (Rx and Tx queues) contexts. Due to a HW errata when NDC detects fault/poision while accessing contexts it could go into an illegal state where a cache line could get locked forever. To makesure all cache lines in NDC are available for optimum performance upon fault/lockerror/posion errors scan through all cache lines in NDC and clear the lock bit. Fixes: 4a3581cd5995 ("octeontx2-af: NPA AQ instruction enqueue support") Signed-off-by: Suman Ghosh <sumang@marvell.com> Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com> Signed-off-by: Sai Krishna <saikrishnag@marvell.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-07scsi: mpi3mr: Fix expander node leak in mpi3mr_remove()Tomas Henzl
Add a missing resource clean up in .remove. Fixes: e22bae30667a ("scsi: mpi3mr: Add expander devices to STL") Signed-off-by: Tomas Henzl <thenzl@redhat.com> Link: https://lore.kernel.org/r/20230302234336.25456-7-thenzl@redhat.com Acked-by: Sathya Prakash Veerichetty <sathya.prakash@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-03-07scsi: mpi3mr: Fix memory leaks in mpi3mr_init_ioc()Tomas Henzl
Don't allocate memory again when IOC is being reinitialized. Fixes: fe6db6151565 ("scsi: mpi3mr: Handle offline FW activation in graceful manner") Signed-off-by: Tomas Henzl <thenzl@redhat.com> Link: https://lore.kernel.org/r/20230302234336.25456-6-thenzl@redhat.com Acked-by: Sathya Prakash Veerichetty <sathya.prakash@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-03-07scsi: mpi3mr: Fix sas_hba.phy memory leak in mpi3mr_remove()Tomas Henzl
Free mrioc->sas_hba.phy at .remove. Fixes: 42fc9fee116f ("scsi: mpi3mr: Add helper functions to manage device's port") Signed-off-by: Tomas Henzl <thenzl@redhat.com> Link: https://lore.kernel.org/r/20230302234336.25456-5-thenzl@redhat.com Acked-by: Sathya Prakash Veerichetty <sathya.prakash@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-03-07scsi: mpi3mr: Fix mpi3mr_hba_port memory leak in mpi3mr_remove()Tomas Henzl
Free mpi3mr_hba_port at .remove. Fixes: 42fc9fee116f ("scsi: mpi3mr: Add helper functions to manage device's port") Signed-off-by: Tomas Henzl <thenzl@redhat.com> Link: https://lore.kernel.org/r/20230302234336.25456-4-thenzl@redhat.com Acked-by: Sathya Prakash Veerichetty <sathya.prakash@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-03-07scsi: mpi3mr: Fix config page DMA memory leakTomas Henzl
A fix for: DMA-API: pci 0000:83:00.0: device driver has pending DMA allocations while released from device [count=1] Fixes: 32d457d5a2af ("scsi: mpi3mr: Add framework to issue config requests") Signed-off-by: Tomas Henzl <thenzl@redhat.com> Link: https://lore.kernel.org/r/20230302234336.25456-3-thenzl@redhat.com Acked-by: Sathya Prakash Veerichetty <sathya.prakash@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-03-07scsi: mpi3mr: Fix throttle_groups memory leakTomas Henzl
Add a missing kfree(). Fixes: f10af057325c ("scsi: mpi3mr: Resource Based Metering") Signed-off-by: Tomas Henzl <thenzl@redhat.com> Link: https://lore.kernel.org/r/20230302234336.25456-2-thenzl@redhat.com Acked-by: Sathya Prakash Veerichetty <sathya.prakash@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-03-07scsi: mpt3sas: Fix NULL pointer access in mpt3sas_transport_port_add()Wenchao Hao
Port is allocated by sas_port_alloc_num() and rphy is allocated by either sas_end_device_alloc() or sas_expander_alloc(), all of which may return NULL. So we need to check the rphy to avoid possible NULL pointer access. If sas_rphy_add() returned with failure, rphy is set to NULL. We would access the rphy in the following lines which would also result NULL pointer access. Fixes: 78316e9dfc24 ("scsi: mpt3sas: Fix possible resource leaks in mpt3sas_transport_port_add()") Signed-off-by: Wenchao Hao <haowenchao2@huawei.com> Link: https://lore.kernel.org/r/20230225100135.2109330-1-haowenchao2@huawei.com Acked-by: Sathya Prakash Veerichetty <sathya.prakash@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-03-07ethernet: ice: avoid gcc-9 integer overflow warningArnd Bergmann
With older compilers like gcc-9, the calculation of the vlan priority field causes a false-positive warning from the byteswap: In file included from drivers/net/ethernet/intel/ice/ice_tc_lib.c:4: drivers/net/ethernet/intel/ice/ice_tc_lib.c: In function 'ice_parse_cls_flower': include/uapi/linux/swab.h:15:15: error: integer overflow in expression '(int)(short unsigned int)((int)match.key-><U67c8>.<U6698>.vlan_priority << 13) & 57344 & 255' of type 'int' results in '0' [-Werror=overflow] 15 | (((__u16)(x) & (__u16)0x00ffU) << 8) | \ | ~~~~~~~~~~~~^~~~~~~~~~~~~~~~~ include/uapi/linux/swab.h:106:2: note: in expansion of macro '___constant_swab16' 106 | ___constant_swab16(x) : \ | ^~~~~~~~~~~~~~~~~~ include/uapi/linux/byteorder/little_endian.h:42:43: note: in expansion of macro '__swab16' 42 | #define __cpu_to_be16(x) ((__force __be16)__swab16((x))) | ^~~~~~~~ include/linux/byteorder/generic.h:96:21: note: in expansion of macro '__cpu_to_be16' 96 | #define cpu_to_be16 __cpu_to_be16 | ^~~~~~~~~~~~~ drivers/net/ethernet/intel/ice/ice_tc_lib.c:1458:5: note: in expansion of macro 'cpu_to_be16' 1458 | cpu_to_be16((match.key->vlan_priority << | ^~~~~~~~~~~ After a change to be16_encode_bits(), the code becomes more readable to both people and compilers, which avoids the warning. Fixes: 34800178b302 ("ice: Add support for VLAN priority filters in switchdev") Suggested-by: Alexander Lobakin <alexandr.lobakin@intel.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Alexander Lobakin <alexandr.lobakin@intel.com> Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-03-07ice: don't ignore return codes in VSI related codeMichal Swiatkowski
There were few smatch warnings reported by Dan: - ice_vsi_cfg_xdp_txqs can return 0 instead of ret, which is cleaner - return values in ice_vsi_cfg_def were ignored - in ice_vsi_rebuild return value was ignored in case rebuild failed, it was a never reached code, however, rewrite it for clarity. - ice_vsi_cfg_tc can return 0 instead of ret Fixes: 6624e780a577 ("ice: split ice_vsi_setup into smaller functions") Reported-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-03-07ice: Fix DSCP PFC TLV creationDave Ertman
When creating the TLV to send to the FW for configuring DSCP mode PFC,the PFCENABLE field was being masked with a 4 bit mask (0xF), but this is an 8 bit bitmask for enabled classes for PFC. This means that traffic classes 4-7 could not be enabled for PFC. Remove the mask completely, as it is not necessary, as we are assigning 8 bits to an 8 bit field. Fixes: 2a87bd73e50d ("ice: Add DSCP support") Signed-off-by: Dave Ertman <david.m.ertman@intel.com> Signed-off-by: Karen Ostrowska <karen.ostrowska@intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-03-07drm/amd/display: Update clock table to include highest clock settingSwapnil Patel
[Why] Currently, the clk manager matches SocVoltage with voltage from fused settings (dfPstate clock table). And then corresponding clocks are selected. However in certain situations, this leads to clk manager not including at least one entry with highest supported clock setting. [How] Update the clk manager to include at least one entry with highest supported clock setting. Reviewed-by: Pavle Kotarac <pavle.kotarac@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Swapnil Patel <Swapnil.Patel@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-03-07drm/amd/pm: Enable ecc_info table support for smu v13_0_10Candice Li
Support EccInfoTable which includes umc ras error count and error address. Signed-off-by: Candice Li <candice.li@amd.com> Reviewed-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Stanley.Yang <Stanley.Yang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit (git 2.34.1) at 2025-09-12 16:33:53 +0000