summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2023-07-27xen: speed up grant-table reclaimDemi Marie Obenour
When a grant entry is still in use by the remote domain, Linux must put it on a deferred list. Normally, this list is very short, because the PV network and block protocols expect the backend to unmap the grant first. However, Qubes OS's GUI protocol is subject to the constraints of the X Window System, and as such winds up with the frontend unmapping the window first. As a result, the list can grow very large, resulting in a massive memory leak and eventual VM freeze. To partially solve this problem, make the number of entries that the VM will attempt to free at each iteration tunable. The default is still 10, but it can be overridden via a module parameter. This is Cc: stable because (when combined with appropriate userspace changes) it fixes a severe performance and stability problem for Qubes OS users. Cc: stable@vger.kernel.org Signed-off-by: Demi Marie Obenour <demi@invisiblethingslab.com> Reviewed-by: Juergen Gross <jgross@suse.com> Link: https://lore.kernel.org/r/20230726165354.1252-1-demi@invisiblethingslab.com Signed-off-by: Juergen Gross <jgross@suse.com>
2023-07-26virtio-net: fix race between set queues and probeJason Wang
A race were found where set_channels could be called after registering but before virtnet_set_queues() in virtnet_probe(). Fixing this by moving the virtnet_set_queues() before netdevice registering. While at it, use _virtnet_set_queues() to avoid holding rtnl as the device is not even registered at that time. Cc: stable@vger.kernel.org Fixes: a220871be66f ("virtio-net: correctly enable multiqueue") Signed-off-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Link: https://lore.kernel.org/r/20230725072049.617289-1-jasowang@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-07-26net: fec: tx processing does not call XDP APIs if budget is 0Wei Fang
According to the clarification [1] in the latest napi.rst, the tx processing cannot call any XDP (or page pool) APIs if the "budget" is 0. Because NAPI is called with the budget of 0 (such as netpoll) indicates we may be in an IRQ context, however, we cannot use the page pool from IRQ context. [1] https://lore.kernel.org/all/20230720161323.2025379-1-kuba@kernel.org/ Fixes: 20f797399035 ("net: fec: recycle pages for transmitted XDP frames") Signed-off-by: Wei Fang <wei.fang@nxp.com> Suggested-by: Jakub Kicinski <kuba@kernel.org> Link: https://lore.kernel.org/r/20230725074148.2936402-1-wei.fang@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-07-26hwmon: (pmbus_core) Fix Deadlock in pmbus_regulator_get_statusGuenter Roeck
pmbus_regulator_get_status() acquires update_lock. pmbus_regulator_get_error_flags() acquires it again, resulting in an immediate deadlock. Call _pmbus_get_flags() from pmbus_regulator_get_status() directly to avoid the problem. Reported-by: Patrick Rudolph <patrick.rudolph@9elements.com> Closes: https://lore.kernel.org/linux-hwmon/b7a3ad85-aab4-4718-a001-1d8b1c0eef36@roeck-us.net/T/#u Cc: Naresh Solanki <Naresh.Solanki@9elements.com> Cc: stable@vger.kernel.org # v6.2+ Fixes: c05f477c4ba3 ("hwmon: (pmbus/core) Implement regulator get_status") Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2023-07-26net/mlx5: Unregister devlink params in case interface is downShay Drory
Currently, in case an interface is down, mlx5 driver doesn't unregister its devlink params, which leads to this WARN[1]. Fix it by unregistering devlink params in that case as well. [1] [ 295.244769 ] WARNING: CPU: 15 PID: 1 at net/core/devlink.c:9042 devlink_free+0x174/0x1fc [ 295.488379 ] CPU: 15 PID: 1 Comm: shutdown Tainted: G S OE 5.15.0-1017.19.3.g0677e61-bluefield #g0677e61 [ 295.509330 ] Hardware name: https://www.mellanox.com BlueField SoC/BlueField SoC, BIOS 4.2.0.12761 Jun 6 2023 [ 295.543096 ] pc : devlink_free+0x174/0x1fc [ 295.551104 ] lr : mlx5_devlink_free+0x18/0x2c [mlx5_core] [ 295.561816 ] sp : ffff80000809b850 [ 295.711155 ] Call trace: [ 295.716030 ] devlink_free+0x174/0x1fc [ 295.723346 ] mlx5_devlink_free+0x18/0x2c [mlx5_core] [ 295.733351 ] mlx5_sf_dev_remove+0x98/0xb0 [mlx5_core] [ 295.743534 ] auxiliary_bus_remove+0x2c/0x50 [ 295.751893 ] __device_release_driver+0x19c/0x280 [ 295.761120 ] device_release_driver+0x34/0x50 [ 295.769649 ] bus_remove_device+0xdc/0x170 [ 295.777656 ] device_del+0x17c/0x3a4 [ 295.784620 ] mlx5_sf_dev_remove+0x28/0xf0 [mlx5_core] [ 295.794800 ] mlx5_sf_dev_table_destroy+0x98/0x110 [mlx5_core] [ 295.806375 ] mlx5_unload+0x34/0xd0 [mlx5_core] [ 295.815339 ] mlx5_unload_one+0x70/0xe4 [mlx5_core] [ 295.824998 ] shutdown+0xb0/0xd8 [mlx5_core] [ 295.833439 ] pci_device_shutdown+0x3c/0xa0 [ 295.841651 ] device_shutdown+0x170/0x340 [ 295.849486 ] __do_sys_reboot+0x1f4/0x2a0 [ 295.857322 ] __arm64_sys_reboot+0x2c/0x40 [ 295.865329 ] invoke_syscall+0x78/0x100 [ 295.872817 ] el0_svc_common.constprop.0+0x54/0x184 [ 295.882392 ] do_el0_svc+0x30/0xac [ 295.889008 ] el0_svc+0x48/0x160 [ 295.895278 ] el0t_64_sync_handler+0xa4/0x130 [ 295.903807 ] el0t_64_sync+0x1a4/0x1a8 [ 295.911120 ] ---[ end trace 4f1d2381d00d9dce ]--- Fixes: fe578cbb2f05 ("net/mlx5: Move devlink registration before mlx5_load") Signed-off-by: Shay Drory <shayd@nvidia.com> Reviewed-by: Maher Sanalla <msanalla@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-07-26net/mlx5: DR, Fix peer domain namespace settingShay Drory
The offending patch is based on the assumption that for PFs, mlx5_get_dev_index() is the same as vhca_id. However, this assumption is wrong in case of DPU (ECPF). Fix it by using vhca_id directly, and switch the array of peers to xarray. Fixes: 6d5b7321d8af ("net/mlx5: DR, handle more than one peer domain") Signed-off-by: Shay Drory <shayd@nvidia.com> Reviewed-by: Yevgeny Kliteynik <kliteyn@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-07-26net/mlx5: fs_chains: Fix ft prio if ignore_flow_level is not supportedChris Mi
The cited commit sets ft prio to fs_base_prio. But if ignore_flow_level it not supported, ft prio must be set based on tc filter prio. Otherwise, all the ft prio are the same on the same chain. It is invalid if ignore_flow_level is not supported. Fix it by setting ft prio based on tc filter prio and setting fs_base_prio to 0 for fdb. Fixes: 8e80e5648092 ("net/mlx5: fs_chains: Refactor to detach chains from tc usage") Signed-off-by: Chris Mi <cmi@nvidia.com> Reviewed-by: Paul Blakey <paulb@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-07-26net/mlx5e: kTLS, Fix protection domain in use syndrome when devlink reloadJianbo Liu
There are DEK objects cached in DEK pool after kTLS is used, and they are freed only in mlx5e_ktls_cleanup(). mlx5e_destroy_mdev_resources() is called in mlx5e_suspend() to free mdev resources, including protection domain (PD). However, PD is still referenced by the cached DEK objects in this case, because profile->cleanup() (and therefore mlx5e_ktls_cleanup()) is called after mlx5e_suspend() during devlink reload. So the following FW syndrome is generated: mlx5_cmd_out_err:803:(pid 12948): DEALLOC_PD(0x801) op_mod(0x0) failed, status bad resource state(0x9), syndrome (0xef0c8a), err(-22) To avoid this syndrome, move DEK pool destruction to mlx5e_ktls_cleanup_tx(), which is called by profile->cleanup_tx(). And move pool creation to mlx5e_ktls_init_tx() for symmetry. Fixes: f741db1a5171 ("net/mlx5e: kTLS, Improve connection rate by using fast update encryption key") Signed-off-by: Jianbo Liu <jianbol@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-07-26net/mlx5: Bridge, set debugfs access right to root-onlyVlad Buslov
As suggested during code review set the access rights for bridge 'fdb' debugfs file to root-only. Fixes: 791eb78285e8 ("net/mlx5: Bridge, expose FDB state via debugfs") Reported-by: Jakub Kicinski <kuba@kernel.org> Link: https://lore.kernel.org/netdev/20230619120515.5045132a@kernel.org/ Signed-off-by: Vlad Buslov <vladbu@nvidia.com> Reviewed-by: Gal Pressman <gal@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-07-26net/mlx5e: xsk: Fix crash on regular rq reactivationDragos Tatulea
When the regular rq is reactivated after the XSK socket is closed it could be reading stale cqes which eventually corrupts the rq. This leads to no more traffic being received on the regular rq and a crash on the next close or deactivation of the rq. Kal Cuttler Conely reported this issue as a crash on the release path when the xdpsock sample program is stopped (killed) and restarted in sequence while traffic is running. This patch flushes all cqes when during the rq flush. The cqe flushing is done in the reset state of the rq. mlx5e_rq_to_ready code is moved into the flush function to allow for this. Fixes: 082a9edf12fe ("net/mlx5e: xsk: Flush RQ on XSK activation to save memory") Reported-by: Kal Cutter Conley <kal.conley@dectris.com> Closes: https://lore.kernel.org/xdp-newbies/CAHApi-nUAs4TeFWUDV915CZJo07XVg2Vp63-no7UDfj6wur9nQ@mail.gmail.com Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-07-26net/mlx5e: xsk: Fix invalid buffer access for legacy rqDragos Tatulea
The below crash can be encountered when using xdpsock in rx mode for legacy rq: the buffer gets released in the XDP_REDIRECT path, and then once again in the driver. This fix sets the flag to avoid releasing on the driver side. XSK handling of buffers for legacy rq was relying on the caller to set the skip release flag. But the referenced fix started using fragment counts for pages instead of the skip flag. Crash log: general protection fault, probably for non-canonical address 0xffff8881217e3a: 0000 [#1] SMP CPU: 0 PID: 14 Comm: ksoftirqd/0 Not tainted 6.5.0-rc1+ #31 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 RIP: 0010:bpf_prog_03b13f331978c78c+0xf/0x28 Code: ... RSP: 0018:ffff88810082fc98 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff888138404901 RCX: c0ffffc900027cbc RDX: ffffffffa000b514 RSI: 00ffff8881217e32 RDI: ffff888138404901 RBP: ffff88810082fc98 R08: 0000000000091100 R09: 0000000000000006 R10: 0000000000000800 R11: 0000000000000800 R12: ffffc9000027a000 R13: ffff8881217e2dc0 R14: ffff8881217e2910 R15: ffff8881217e2f00 FS: 0000000000000000(0000) GS:ffff88852c800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000564cb2e2cde0 CR3: 000000010e603004 CR4: 0000000000370eb0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> ? die_addr+0x32/0x80 ? exc_general_protection+0x192/0x390 ? asm_exc_general_protection+0x22/0x30 ? 0xffffffffa000b514 ? bpf_prog_03b13f331978c78c+0xf/0x28 mlx5e_xdp_handle+0x48/0x670 [mlx5_core] ? dev_gro_receive+0x3b5/0x6e0 mlx5e_xsk_skb_from_cqe_linear+0x6e/0x90 [mlx5_core] mlx5e_handle_rx_cqe+0x55/0x100 [mlx5_core] mlx5e_poll_rx_cq+0x87/0x6e0 [mlx5_core] mlx5e_napi_poll+0x45e/0x6b0 [mlx5_core] __napi_poll+0x25/0x1a0 net_rx_action+0x28a/0x300 __do_softirq+0xcd/0x279 ? sort_range+0x20/0x20 run_ksoftirqd+0x1a/0x20 smpboot_thread_fn+0xa2/0x130 kthread+0xc9/0xf0 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x1f/0x30 </TASK> Modules linked in: mlx5_ib mlx5_core rpcrdma rdma_ucm ib_iser libiscsi scsi_transport_iscsi ib_umad rdma_cm ib_ipoib iw_cm ib_cm ib_uverbs ib_core xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink xt_addrtype iptable_nat nf_nat br_netfilter overlay zram zsmalloc fuse [last unloaded: mlx5_core] ---[ end trace 0000000000000000 ]--- Fixes: 7abd955a58fb ("net/mlx5e: RX, Fix page_pool page fragment tracking for XDP") Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-07-26net/mlx5e: Move representor neigh cleanup to profile cleanup_txJianbo Liu
For IP tunnel encapsulation in ECMP (Equal-Cost Multipath) mode, as the flow is duplicated to the peer eswitch, the related neighbour information on the peer uplink representor is created as well. In the cited commit, eswitch devcom unpair is moved to uplink unload API, specifically the profile->cleanup_tx. If there is a encap rule offloaded in ECMP mode, when one eswitch does unpair (because of unloading the driver, for instance), and the peer rule from the peer eswitch is going to be deleted, the use-after-free error is triggered while accessing neigh info, as it is already cleaned up in uplink's profile->disable, which is before its profile->cleanup_tx. To fix this issue, move the neigh cleanup to profile's cleanup_tx callback, and after mlx5e_cleanup_uplink_rep_tx is called. The neigh init is moved to init_tx for symmeter. [ 2453.376299] BUG: KASAN: slab-use-after-free in mlx5e_rep_neigh_entry_release+0x109/0x3a0 [mlx5_core] [ 2453.379125] Read of size 4 at addr ffff888127af9008 by task modprobe/2496 [ 2453.381542] CPU: 7 PID: 2496 Comm: modprobe Tainted: G B 6.4.0-rc7+ #15 [ 2453.383386] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 [ 2453.384335] Call Trace: [ 2453.384625] <TASK> [ 2453.384891] dump_stack_lvl+0x33/0x50 [ 2453.385285] print_report+0xc2/0x610 [ 2453.385667] ? __virt_addr_valid+0xb1/0x130 [ 2453.386091] ? mlx5e_rep_neigh_entry_release+0x109/0x3a0 [mlx5_core] [ 2453.386757] kasan_report+0xae/0xe0 [ 2453.387123] ? mlx5e_rep_neigh_entry_release+0x109/0x3a0 [mlx5_core] [ 2453.387798] mlx5e_rep_neigh_entry_release+0x109/0x3a0 [mlx5_core] [ 2453.388465] mlx5e_rep_encap_entry_detach+0xa6/0xe0 [mlx5_core] [ 2453.389111] mlx5e_encap_dealloc+0xa7/0x100 [mlx5_core] [ 2453.389706] mlx5e_tc_tun_encap_dests_unset+0x61/0xb0 [mlx5_core] [ 2453.390361] mlx5_free_flow_attr_actions+0x11e/0x340 [mlx5_core] [ 2453.391015] ? complete_all+0x43/0xd0 [ 2453.391398] ? free_flow_post_acts+0x38/0x120 [mlx5_core] [ 2453.392004] mlx5e_tc_del_fdb_flow+0x4ae/0x690 [mlx5_core] [ 2453.392618] mlx5e_tc_del_fdb_peers_flow+0x308/0x370 [mlx5_core] [ 2453.393276] mlx5e_tc_clean_fdb_peer_flows+0xf5/0x140 [mlx5_core] [ 2453.393925] mlx5_esw_offloads_unpair+0x86/0x540 [mlx5_core] [ 2453.394546] ? mlx5_esw_offloads_set_ns_peer.isra.0+0x180/0x180 [mlx5_core] [ 2453.395268] ? down_write+0xaa/0x100 [ 2453.395652] mlx5_esw_offloads_devcom_event+0x203/0x530 [mlx5_core] [ 2453.396317] mlx5_devcom_send_event+0xbb/0x190 [mlx5_core] [ 2453.396917] mlx5_esw_offloads_devcom_cleanup+0xb0/0xd0 [mlx5_core] [ 2453.397582] mlx5e_tc_esw_cleanup+0x42/0x120 [mlx5_core] [ 2453.398182] mlx5e_rep_tc_cleanup+0x15/0x30 [mlx5_core] [ 2453.398768] mlx5e_cleanup_rep_tx+0x6c/0x80 [mlx5_core] [ 2453.399367] mlx5e_detach_netdev+0xee/0x120 [mlx5_core] [ 2453.399957] mlx5e_netdev_change_profile+0x84/0x170 [mlx5_core] [ 2453.400598] mlx5e_vport_rep_unload+0xe0/0xf0 [mlx5_core] [ 2453.403781] mlx5_eswitch_unregister_vport_reps+0x15e/0x190 [mlx5_core] [ 2453.404479] ? mlx5_eswitch_register_vport_reps+0x200/0x200 [mlx5_core] [ 2453.405170] ? up_write+0x39/0x60 [ 2453.405529] ? kernfs_remove_by_name_ns+0xb7/0xe0 [ 2453.405985] auxiliary_bus_remove+0x2e/0x40 [ 2453.406405] device_release_driver_internal+0x243/0x2d0 [ 2453.406900] ? kobject_put+0x42/0x2d0 [ 2453.407284] bus_remove_device+0x128/0x1d0 [ 2453.407687] device_del+0x240/0x550 [ 2453.408053] ? waiting_for_supplier_show+0xe0/0xe0 [ 2453.408511] ? kobject_put+0xfa/0x2d0 [ 2453.408889] ? __kmem_cache_free+0x14d/0x280 [ 2453.409310] mlx5_rescan_drivers_locked.part.0+0xcd/0x2b0 [mlx5_core] [ 2453.409973] mlx5_unregister_device+0x40/0x50 [mlx5_core] [ 2453.410561] mlx5_uninit_one+0x3d/0x110 [mlx5_core] [ 2453.411111] remove_one+0x89/0x130 [mlx5_core] [ 2453.411628] pci_device_remove+0x59/0xf0 [ 2453.412026] device_release_driver_internal+0x243/0x2d0 [ 2453.412511] ? parse_option_str+0x14/0x90 [ 2453.412915] driver_detach+0x7b/0xf0 [ 2453.413289] bus_remove_driver+0xb5/0x160 [ 2453.413685] pci_unregister_driver+0x3f/0xf0 [ 2453.414104] mlx5_cleanup+0xc/0x20 [mlx5_core] Fixes: 2be5bd42a5bb ("net/mlx5: Handle pairing of E-switch via uplink un/load APIs") Signed-off-by: Jianbo Liu <jianbol@nvidia.com> Reviewed-by: Vlad Buslov <vladbu@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-07-26net/mlx5e: Fix crash moving to switchdev mode when ntuple offload is setAmir Tzin
Moving to switchdev mode with ntuple offload on causes the kernel to crash since fs->arfs is freed during nic profile cleanup flow. Ntuple offload is not supported in switchdev mode and it is already unset by mlx5 fix feature ndo in switchdev mode. Verify fs->arfs is valid before disabling it. trace: [] RIP: 0010:_raw_spin_lock_bh+0x17/0x30 [] arfs_del_rules+0x44/0x1a0 [mlx5_core] [] mlx5e_arfs_disable+0xe/0x20 [mlx5_core] [] mlx5e_handle_feature+0x3d/0xb0 [mlx5_core] [] ? __rtnl_unlock+0x25/0x50 [] mlx5e_set_features+0xfe/0x160 [mlx5_core] [] __netdev_update_features+0x278/0xa50 [] ? netdev_run_todo+0x5e/0x2a0 [] netdev_update_features+0x22/0x70 [] ? _cond_resched+0x15/0x30 [] mlx5e_attach_netdev+0x12a/0x1e0 [mlx5_core] [] mlx5e_netdev_attach_profile+0xa1/0xc0 [mlx5_core] [] mlx5e_netdev_change_profile+0x77/0xe0 [mlx5_core] [] mlx5e_vport_rep_load+0x1ed/0x290 [mlx5_core] [] mlx5_esw_offloads_rep_load+0x88/0xd0 [mlx5_core] [] esw_offloads_load_rep.part.38+0x31/0x50 [mlx5_core] [] esw_offloads_enable+0x6c5/0x710 [mlx5_core] [] mlx5_eswitch_enable_locked+0x1bb/0x290 [mlx5_core] [] mlx5_devlink_eswitch_mode_set+0x14f/0x320 [mlx5_core] [] devlink_nl_cmd_eswitch_set_doit+0x94/0x120 [] genl_family_rcv_msg_doit.isra.17+0x113/0x150 [] genl_family_rcv_msg+0xb7/0x170 [] ? devlink_nl_cmd_port_split_doit+0x100/0x100 [] genl_rcv_msg+0x47/0xa0 [] ? genl_family_rcv_msg+0x170/0x170 [] netlink_rcv_skb+0x4c/0x130 [] genl_rcv+0x24/0x40 [] netlink_unicast+0x19a/0x230 [] netlink_sendmsg+0x204/0x3d0 [] sock_sendmsg+0x50/0x60 Fixes: 90b22b9bcd24 ("net/mlx5e: Disable Rx ntuple offload for uplink representor") Signed-off-by: Amir Tzin <amirtz@nvidia.com> Reviewed-by: Aya Levin <ayal@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-07-26net/mlx5e: Don't hold encap tbl lock if there is no encap actionChris Mi
The cited commit holds encap tbl lock unconditionally when setting up dests. But it may cause the following deadlock: PID: 1063722 TASK: ffffa062ca5d0000 CPU: 13 COMMAND: "handler8" #0 [ffffb14de05b7368] __schedule at ffffffffa1d5aa91 #1 [ffffb14de05b7410] schedule at ffffffffa1d5afdb #2 [ffffb14de05b7430] schedule_preempt_disabled at ffffffffa1d5b528 #3 [ffffb14de05b7440] __mutex_lock at ffffffffa1d5d6cb #4 [ffffb14de05b74e8] mutex_lock_nested at ffffffffa1d5ddeb #5 [ffffb14de05b74f8] mlx5e_tc_tun_encap_dests_set at ffffffffc12f2096 [mlx5_core] #6 [ffffb14de05b7568] post_process_attr at ffffffffc12d9fc5 [mlx5_core] #7 [ffffb14de05b75a0] mlx5e_tc_add_fdb_flow at ffffffffc12de877 [mlx5_core] #8 [ffffb14de05b75f0] __mlx5e_add_fdb_flow at ffffffffc12e0eef [mlx5_core] #9 [ffffb14de05b7660] mlx5e_tc_add_flow at ffffffffc12e12f7 [mlx5_core] #10 [ffffb14de05b76b8] mlx5e_configure_flower at ffffffffc12e1686 [mlx5_core] #11 [ffffb14de05b7720] mlx5e_rep_indr_offload at ffffffffc12e3817 [mlx5_core] #12 [ffffb14de05b7730] mlx5e_rep_indr_setup_tc_cb at ffffffffc12e388a [mlx5_core] #13 [ffffb14de05b7740] tc_setup_cb_add at ffffffffa1ab2ba8 #14 [ffffb14de05b77a0] fl_hw_replace_filter at ffffffffc0bdec2f [cls_flower] #15 [ffffb14de05b7868] fl_change at ffffffffc0be6caa [cls_flower] #16 [ffffb14de05b7908] tc_new_tfilter at ffffffffa1ab71f0 [1031218.028143] wait_for_completion+0x24/0x30 [1031218.028589] mlx5e_update_route_decap_flows+0x9a/0x1e0 [mlx5_core] [1031218.029256] mlx5e_tc_fib_event_work+0x1ad/0x300 [mlx5_core] [1031218.029885] process_one_work+0x24e/0x510 Actually no need to hold encap tbl lock if there is no encap action. Fix it by checking if encap action exists or not before holding encap tbl lock. Fixes: 37c3b9fa7ccf ("net/mlx5e: Prevent encap offload when neigh update is running") Signed-off-by: Chris Mi <cmi@nvidia.com> Reviewed-by: Vlad Buslov <vladbu@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-07-26net/mlx5: Honor user input for migratable port fn attrShay Drory
Currently, whenever a user is setting migratable port fn attr, the driver is always turn migratable capability on. Fix it by honor the user input Fixes: e5b9642a33be ("net/mlx5: E-Switch, Implement devlink port function cmds to control migratable") Signed-off-by: Shay Drory <shayd@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-07-26net/mlx5e: fix return value check in mlx5e_ipsec_remove_trailer()Yuanjun Gong
mlx5e_ipsec_remove_trailer() should return an error code if function pskb_trim() returns an unexpected value. Fixes: 2ac9cfe78223 ("net/mlx5e: IPSec, Add Innova IPSec offload TX data path") Signed-off-by: Yuanjun Gong <ruc_gongyuanjun@163.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-07-26net/mlx5: fix potential memory leak in mlx5e_init_rep_rxZhengchao Shao
The memory pointed to by the priv->rx_res pointer is not freed in the error path of mlx5e_init_rep_rx, which can lead to a memory leak. Fix by freeing the memory in the error path, thereby making the error path identical to mlx5e_cleanup_rep_rx(). Fixes: af8bbf730068 ("net/mlx5e: Convert mlx5e_flow_steering member of mlx5e_priv to pointer") Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-07-26net/mlx5: DR, fix memory leak in mlx5dr_cmd_create_reformat_ctxZhengchao Shao
when mlx5_cmd_exec failed in mlx5dr_cmd_create_reformat_ctx, the memory pointed by 'in' is not released, which will cause memory leak. Move memory release after mlx5_cmd_exec. Fixes: 1d9186476e12 ("net/mlx5: DR, Add direct rule command utilities") Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-07-26net/mlx5e: fix double free in macsec_fs_tx_create_crypto_table_groupsZhengchao Shao
In function macsec_fs_tx_create_crypto_table_groups(), when the ft->g memory is successfully allocated but the 'in' memory fails to be allocated, the memory pointed to by ft->g is released once. And in function macsec_fs_tx_create(), macsec_fs_tx_destroy() is called to release the memory pointed to by ft->g again. This will cause double free problem. Fixes: e467b283ffd5 ("net/mlx5e: Add MACsec TX steering rules") Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-07-26Merge tag 'platform-drivers-x86-v6.5-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86 Pull x86 platform driver fixes from Hans de Goede: "Misc small fixes and hw-id additions" * tag 'platform-drivers-x86-v6.5-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: platform/x86: huawei-wmi: Silence ambient light sensor platform/x86: msi-laptop: Fix rfkill out-of-sync on MSI Wind U100 platform/x86: asus-wmi: Fix setting RGB mode on some TUF laptops platform/x86: think-lmi: Use kfree_sensitive instead of kfree platform/x86/intel/hid: Add HP Dragonfly G2 to VGBS DMI quirks platform/x86: intel: hid: Always call BTNL ACPI method platform/x86/amd/pmf: Notify OS power slider update platform/x86/amd/pmf: reduce verbosity of apmf_get_system_params platform/x86: serial-multi-instantiate: Auto detect IRQ resource for CSC3551 platform/x86/amd: pmc: Use release_mem_region() to undo request_mem_region_muxed() platform/x86: touchscreen_dmi.c: small changes for Archos 101 Cesium Educ tablet
2023-07-26drm/msm: Disallow submit with fence id 0Rob Clark
A fence id of zero is expected to be invalid, and is not removed from the fence_idr table. If userspace is requesting to specify the fence id with the FENCE_SN_IN flag, we need to reject a zero fence id value. Fixes: 17154addc5c1 ("drm/msm: Add MSM_SUBMIT_FENCE_SN_IN") Signed-off-by: Rob Clark <robdclark@chromium.org> Patchwork: https://patchwork.freedesktop.org/patch/549180/
2023-07-26rbd: retrieve and check lock owner twice before blocklistingIlya Dryomov
An attempt to acquire exclusive lock can race with the current lock owner closing the image: 1. lock is held by client123, rbd_lock() returns -EBUSY 2. get_lock_owner_info() returns client123 instance details 3. client123 closes the image, lock is released 4. find_watcher() returns 0 as there is no matching watcher anymore 5. client123 instance gets erroneously blocklisted Particularly impacted is mirror snapshot scheduler in snapshot-based mirroring since it happens to open and close images a lot (images are opened only for as long as it takes to take the next mirror snapshot, the same client instance is used for all images). To reduce the potential for erroneous blocklisting, retrieve the lock owner again after find_watcher() returns 0. If it's still there, make sure it matches the previously detected lock owner. Cc: stable@vger.kernel.org # f38cb9d9c204: rbd: make get_lock_owner_info() return a single locker or NULL Cc: stable@vger.kernel.org # 8ff2c64c9765: rbd: harden get_lock_owner_info() a bit Cc: stable@vger.kernel.org Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Dongsheng Yang <dongsheng.yang@easystack.cn>
2023-07-26rbd: harden get_lock_owner_info() a bitIlya Dryomov
- we want the exclusive lock type, so test for it directly - use sscanf() to actually parse the lock cookie and avoid admitting invalid handles - bail if locker has a blank address Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Dongsheng Yang <dongsheng.yang@easystack.cn>
2023-07-26rbd: make get_lock_owner_info() return a single locker or NULLIlya Dryomov
Make the "num_lockers can be only 0 or 1" assumption explicit and simplify the API by getting rid of output parameters in preparation for calling get_lock_owner_info() twice before blocklisting. Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Dongsheng Yang <dongsheng.yang@easystack.cn>
2023-07-26RDMA/irdma: Report correct WC errorSindhu Devale
Report the correct WC error if a MW bind is performed on an already valid/bound window. Fixes: 44d9e52977a1 ("RDMA/irdma: Implement device initialization definitions") Signed-off-by: Sindhu Devale <sindhu.devale@intel.com> Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com> Link: https://lore.kernel.org/r/20230725155439.1057-2-shiraz.saleem@intel.com Signed-off-by: Leon Romanovsky <leon@kernel.org>
2023-07-26RDMA/irdma: Fix op_type reporting in CQEsSindhu Devale
The op_type field CQ poll info structure is incorrectly filled in with the queue type as opposed to the op_type received in the CQEs. The wrong opcode could be decoded and returned to the ULP. Copy the op_type field received in the CQE in the CQ poll info structure. Fixes: 24419777e943 ("RDMA/irdma: Fix RQ completion opcode") Signed-off-by: Sindhu Devale <sindhu.devale@intel.com> Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com> Link: https://lore.kernel.org/r/20230725155439.1057-1-shiraz.saleem@intel.com Signed-off-by: Leon Romanovsky <leon@kernel.org>
2023-07-26spi: spi-qcom-qspi: Add mem_ops to avoid PIO for badly sized readsDouglas Anderson
In the patch ("spi: spi-qcom-qspi: Fallback to PIO for xfers that aren't multiples of 4 bytes") we detect reads that we can't handle properly and fallback to PIO mode. While that's correct behavior, we can do better by adding "spi_controller_mem_ops" for our controller. Once we do this then the caller will give us a transfer that's a multiple of 4-bytes so we can DMA. Fixes: b5762d95607e ("spi: spi-qcom-qspi: Add DMA mode support") Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Vijaya Krishna Nivarthi <quic_vnivarth@quicinc.com> Link: https://lore.kernel.org/r/20230725110226.2.Id4a39804e01e4a06dae9b73fd2a5194c4c7ea453@changeid Signed-off-by: Mark Brown <broonie@kernel.org>
2023-07-26spi: spi-qcom-qspi: Fallback to PIO for xfers that aren't multiples of 4 bytesDouglas Anderson
The Qualcomm QSPI driver appears to require that any reads using DMA are a mutliple of 4 bytes. If this isn't true then the controller will clobber any extra bytes in memory following the last word. Let's detect this and falback to PIO. This fixes problems reported by slub_debug=FZPUA, which would complain about "kmalloc Redzone overwritten". One such instance said: 0xffffff80c29d541a-0xffffff80c29d541b @offset=21530. First byte 0x0 instead of 0xcc Allocated in mtd_kmalloc_up_to+0x98/0xac age=36 cpu=3 pid=6658 Tracing through what was happening I saw that, while we often did DMA tranfers of 0x1000 bytes, sometimes we'd end up doing ones of 0x41a bytes. Those 0x41a byte transfers were the problem. NOTE: a future change will enable the SPI "mem ops" to help avoid this case, but it still seems good to add the extra check in the transfer. Fixes: b5762d95607e ("spi: spi-qcom-qspi: Add DMA mode support") Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Vijaya Krishna Nivarthi <quic_vnivarth@quicinc.com> Reviewed-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230725110226.1.Ia2f980fc7cd0b831e633391f0bb1272914d8f381@changeid Signed-off-by: Mark Brown <broonie@kernel.org>
2023-07-26igc: Fix Kernel Panic during ndo_tx_timeout callbackMuhammad Husaini Zulkifli
The Xeon validation group has been carrying out some loaded tests with various HW configurations, and they have seen some transmit queue time out happening during the test. This will cause the reset adapter function to be called by igc_tx_timeout(). Similar race conditions may arise when the interface is being brought down and up in igc_reinit_locked(), an interrupt being generated, and igc_clean_tx_irq() being called to complete the TX. When the igc_tx_timeout() function is invoked, this patch will turn off all TX ring HW queues during igc_down() process. TX ring HW queues will be activated again during the igc_configure_tx_ring() process when performing the igc_up() procedure later. This patch also moved existing igc_disable_tx_ring_hw() to avoid using forward declaration. Kernel trace: [ 7678.747813] ------------[ cut here ]------------ [ 7678.757914] NETDEV WATCHDOG: enp1s0 (igc): transmit queue 2 timed out [ 7678.770117] WARNING: CPU: 0 PID: 13 at net/sched/sch_generic.c:525 dev_watchdog+0x1ae/0x1f0 [ 7678.784459] Modules linked in: xt_conntrack nft_chain_nat xt_MASQUERADE xt_addrtype nft_compat nf_tables nfnetlink br_netfilter bridge stp llc overlay dm_mod emrcha(PO) emriio(PO) rktpm(PO) cegbuf_mod(PO) patch_update(PO) se(PO) sgx_tgts(PO) mktme(PO) keylocker(PO) svtdx(PO) svfs_pci_hotplug(PO) vtd_mod(PO) davemem(PO) svmabort(PO) svindexio(PO) usbx2(PO) ehci_sched(PO) svheartbeat(PO) ioapic(PO) sv8259(PO) svintr(PO) lt(PO) pcierootport(PO) enginefw_mod(PO) ata(PO) smbus(PO) spiflash_cdf(PO) arden(PO) dsa_iax(PO) oobmsm_punit(PO) cpm(PO) svkdb(PO) ebg_pch(PO) pch(PO) sviotargets(PO) svbdf(PO) svmem(PO) svbios(PO) dram(PO) svtsc(PO) targets(PO) superio(PO) svkernel(PO) cswitch(PO) mcf(PO) pentiumIII_mod(PO) fs_svfs(PO) mdevdefdb(PO) svfs_os_services(O) ixgbe mdio mdio_devres libphy emeraldrapids_svdefs(PO) regsupport(O) libnvdimm nls_cp437 snd_hda_codec_realtek snd_hda_codec_generic ledtrig_audio snd_hda_intel snd_intel_dspcfg snd_hda_codec snd_hwdep x86_pkg_temp_thermal snd_hda_core snd_pcm snd_timer isst_if_mbox_pci [ 7678.784496] input_leds isst_if_mmio sg snd isst_if_common soundcore wmi button sad9(O) drm fuse backlight configfs efivarfs ip_tables x_tables vmd sdhci led_class rtl8150 r8152 hid_generic pegasus mmc_block usbhid mmc_core hid megaraid_sas ixgb igb i2c_algo_bit ice i40e hpsa scsi_transport_sas e1000e e1000 e100 ax88179_178a usbnet xhci_pci sd_mod xhci_hcd t10_pi crc32c_intel crc64_rocksoft igc crc64 crc_t10dif usbcore crct10dif_generic ptp crct10dif_common usb_common pps_core [ 7679.200403] RIP: 0010:dev_watchdog+0x1ae/0x1f0 [ 7679.210201] Code: 28 e9 53 ff ff ff 4c 89 e7 c6 05 06 42 b9 00 01 e8 17 d1 fb ff 44 89 e9 4c 89 e6 48 c7 c7 40 ad fb 81 48 89 c2 e8 52 62 82 ff <0f> 0b e9 72 ff ff ff 65 8b 05 80 7d 7c 7e 89 c0 48 0f a3 05 0a c1 [ 7679.245438] RSP: 0018:ffa00000001f7d90 EFLAGS: 00010282 [ 7679.256021] RAX: 0000000000000000 RBX: ff11000109938440 RCX: 0000000000000000 [ 7679.268710] RDX: ff11000361e26cd8 RSI: ff11000361e1b880 RDI: ff11000361e1b880 [ 7679.281314] RBP: ffa00000001f7da8 R08: ff1100035f8fffe8 R09: 0000000000027ffb [ 7679.293840] R10: 0000000000001f0a R11: ff1100035f840000 R12: ff11000109938000 [ 7679.306276] R13: 0000000000000002 R14: dead000000000122 R15: ffa00000001f7e18 [ 7679.318648] FS: 0000000000000000(0000) GS:ff11000361e00000(0000) knlGS:0000000000000000 [ 7679.332064] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 7679.342757] CR2: 00007ffff7fca168 CR3: 000000013b08a006 CR4: 0000000000471ef8 [ 7679.354984] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 7679.367207] DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000400 [ 7679.379370] PKRU: 55555554 [ 7679.386446] Call Trace: [ 7679.393152] <TASK> [ 7679.399363] ? __pfx_dev_watchdog+0x10/0x10 [ 7679.407870] call_timer_fn+0x31/0x110 [ 7679.415698] expire_timers+0xb2/0x120 [ 7679.423403] run_timer_softirq+0x179/0x1e0 [ 7679.431532] ? __schedule+0x2b1/0x820 [ 7679.439078] __do_softirq+0xd1/0x295 [ 7679.446426] ? __pfx_smpboot_thread_fn+0x10/0x10 [ 7679.454867] run_ksoftirqd+0x22/0x30 [ 7679.462058] smpboot_thread_fn+0xb7/0x160 [ 7679.469670] kthread+0xcd/0xf0 [ 7679.476097] ? __pfx_kthread+0x10/0x10 [ 7679.483211] ret_from_fork+0x29/0x50 [ 7679.490047] </TASK> [ 7679.495204] ---[ end trace 0000000000000000 ]--- [ 7679.503179] igc 0000:01:00.0 enp1s0: Register Dump [ 7679.511230] igc 0000:01:00.0 enp1s0: Register Name Value [ 7679.519892] igc 0000:01:00.0 enp1s0: CTRL 181c0641 [ 7679.528782] igc 0000:01:00.0 enp1s0: STATUS 40280683 [ 7679.537551] igc 0000:01:00.0 enp1s0: CTRL_EXT 10000040 [ 7679.546284] igc 0000:01:00.0 enp1s0: MDIC 180a3800 [ 7679.554942] igc 0000:01:00.0 enp1s0: ICR 00000081 [ 7679.563503] igc 0000:01:00.0 enp1s0: RCTL 04408022 [ 7679.571963] igc 0000:01:00.0 enp1s0: RDLEN[0-3] 00001000 00001000 00001000 00001000 [ 7679.583075] igc 0000:01:00.0 enp1s0: RDH[0-3] 00000068 000000b6 0000000f 00000031 [ 7679.594162] igc 0000:01:00.0 enp1s0: RDT[0-3] 00000066 000000b2 0000000e 00000030 [ 7679.605174] igc 0000:01:00.0 enp1s0: RXDCTL[0-3] 02040808 02040808 02040808 02040808 [ 7679.616196] igc 0000:01:00.0 enp1s0: RDBAL[0-3] 1bb7c000 1bb7f000 1bb82000 0ef33000 [ 7679.627242] igc 0000:01:00.0 enp1s0: RDBAH[0-3] 00000001 00000001 00000001 00000001 [ 7679.638256] igc 0000:01:00.0 enp1s0: TCTL a503f0fa [ 7679.646607] igc 0000:01:00.0 enp1s0: TDBAL[0-3] 2ba4a000 1bb6f000 1bb74000 1bb79000 [ 7679.657609] igc 0000:01:00.0 enp1s0: TDBAH[0-3] 00000001 00000001 00000001 00000001 [ 7679.668551] igc 0000:01:00.0 enp1s0: TDLEN[0-3] 00001000 00001000 00001000 00001000 [ 7679.679470] igc 0000:01:00.0 enp1s0: TDH[0-3] 000000a7 0000002d 000000bf 000000d9 [ 7679.690406] igc 0000:01:00.0 enp1s0: TDT[0-3] 000000a7 0000002d 000000bf 000000d9 [ 7679.701264] igc 0000:01:00.0 enp1s0: TXDCTL[0-3] 02100108 02100108 02100108 02100108 [ 7679.712123] igc 0000:01:00.0 enp1s0: Reset adapter [ 7683.085967] igc 0000:01:00.0 enp1s0: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [ 8086.945561] ------------[ cut here ]------------ Entering kdb (current=0xffffffff8220b200, pid 0) on processor 0 Oops: (null) due to oops @ 0xffffffff81573888 RIP: 0010:dql_completed+0x148/0x160 Code: c9 00 48 89 57 58 e9 46 ff ff ff 45 85 e4 41 0f 95 c4 41 39 db 0f 95 c1 41 84 cc 74 05 45 85 ed 78 0a 44 89 c1 e9 27 ff ff ff <0f> 0b 01 f6 44 89 c1 29 f1 0f 48 ca eb 8c cc cc cc cc cc cc cc cc RSP: 0018:ffa0000000003e00 EFLAGS: 00010287 RAX: 000000000000006c RBX: ffa0000003eb0f78 RCX: ff11000109938000 RDX: 0000000000000003 RSI: 0000000000000160 RDI: ff110001002e9480 RBP: ffa0000000003ed8 R08: ff110001002e93c0 R09: ffa0000000003d28 R10: 0000000000007cc0 R11: 0000000000007c54 R12: 00000000ffffffd9 R13: ff1100037039cb00 R14: 00000000ffffffd9 R15: ff1100037039c048 FS: 0000000000000000(0000) GS:ff11000361e00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007ffff7fca168 CR3: 000000013b08a003 CR4: 0000000000471ef8 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <IRQ> ? igc_poll+0x1a9/0x14d0 [igc] __napi_poll+0x2e/0x1b0 net_rx_action+0x126/0x250 __do_softirq+0xd1/0x295 irq_exit_rcu+0xc5/0xf0 common_interrupt+0x86/0xa0 </IRQ> <TASK> asm_common_interrupt+0x27/0x40 RIP: 0010:cpuidle_enter_state+0xd3/0x3e0 Code: 73 f1 ff ff 49 89 c6 8b 05 e2 ca a7 00 85 c0 0f 8f b3 02 00 00 31 ff e8 1b de 75 ff 80 7d d7 00 0f 85 cd 01 00 00 fb 45 85 ff <0f> 88 fd 00 00 00 49 63 cf 4c 2b 75 c8 48 8d 04 49 48 89 ca 48 8d RSP: 0018:ffffffff82203df0 EFLAGS: 00000202 RAX: ff11000361e2a200 RBX: 0000000000000002 RCX: 000000000000001f RDX: 0000000000000000 RSI: 000000003cf3cf3d RDI: 0000000000000000 RBP: ffffffff82203e28 R08: 0000075ae38471c8 R09: 0000000000000018 R10: 000000000000031a R11: ffffffff8238dca0 R12: ffd1ffffff200000 R13: ffffffff8238dca0 R14: 0000075ae38471c8 R15: 0000000000000002 cpuidle_enter+0x2e/0x50 call_cpuidle+0x23/0x40 do_idle+0x1be/0x220 cpu_startup_entry+0x20/0x30 rest_init+0xb5/0xc0 arch_call_rest_init+0xe/0x30 start_kernel+0x448/0x760 x86_64_start_kernel+0x109/0x150 secondary_startup_64_no_verify+0xe0/0xeb </TASK> more> [0]kdb> [0]kdb> [0]kdb> go Catastrophic error detected kdb_continue_catastrophic=0, type go a second time if you really want to continue [0]kdb> go Catastrophic error detected kdb_continue_catastrophic=0, attempting to continue [ 8086.955689] refcount_t: underflow; use-after-free. [ 8086.955697] WARNING: CPU: 0 PID: 0 at lib/refcount.c:28 refcount_warn_saturate+0xc2/0x110 [ 8086.955706] Modules linked in: xt_conntrack nft_chain_nat xt_MASQUERADE xt_addrtype nft_compat nf_tables nfnetlink br_netfilter bridge stp llc overlay dm_mod emrcha(PO) emriio(PO) rktpm(PO) cegbuf_mod(PO) patch_update(PO) se(PO) sgx_tgts(PO) mktme(PO) keylocker(PO) svtdx(PO) svfs_pci_hotplug(PO) vtd_mod(PO) davemem(PO) svmabort(PO) svindexio(PO) usbx2(PO) ehci_sched(PO) svheartbeat(PO) ioapic(PO) sv8259(PO) svintr(PO) lt(PO) pcierootport(PO) enginefw_mod(PO) ata(PO) smbus(PO) spiflash_cdf(PO) arden(PO) dsa_iax(PO) oobmsm_punit(PO) cpm(PO) svkdb(PO) ebg_pch(PO) pch(PO) sviotargets(PO) svbdf(PO) svmem(PO) svbios(PO) dram(PO) svtsc(PO) targets(PO) superio(PO) svkernel(PO) cswitch(PO) mcf(PO) pentiumIII_mod(PO) fs_svfs(PO) mdevdefdb(PO) svfs_os_services(O) ixgbe mdio mdio_devres libphy emeraldrapids_svdefs(PO) regsupport(O) libnvdimm nls_cp437 snd_hda_codec_realtek snd_hda_codec_generic ledtrig_audio snd_hda_intel snd_intel_dspcfg snd_hda_codec snd_hwdep x86_pkg_temp_thermal snd_hda_core snd_pcm snd_timer isst_if_mbox_pci [ 8086.955751] input_leds isst_if_mmio sg snd isst_if_common soundcore wmi button sad9(O) drm fuse backlight configfs efivarfs ip_tables x_tables vmd sdhci led_class rtl8150 r8152 hid_generic pegasus mmc_block usbhid mmc_core hid megaraid_sas ixgb igb i2c_algo_bit ice i40e hpsa scsi_transport_sas e1000e e1000 e100 ax88179_178a usbnet xhci_pci sd_mod xhci_hcd t10_pi crc32c_intel crc64_rocksoft igc crc64 crc_t10dif usbcore crct10dif_generic ptp crct10dif_common usb_common pps_core [ 8086.955784] RIP: 0010:refcount_warn_saturate+0xc2/0x110 [ 8086.955788] Code: 01 e8 82 e7 b4 ff 0f 0b 5d c3 cc cc cc cc 80 3d 68 c6 eb 00 00 75 81 48 c7 c7 a0 87 f6 81 c6 05 58 c6 eb 00 01 e8 5e e7 b4 ff <0f> 0b 5d c3 cc cc cc cc 80 3d 42 c6 eb 00 00 0f 85 59 ff ff ff 48 [ 8086.955790] RSP: 0018:ffa0000000003da0 EFLAGS: 00010286 [ 8086.955793] RAX: 0000000000000000 RBX: ff1100011da40ee0 RCX: ff11000361e1b888 [ 8086.955794] RDX: 00000000ffffffd8 RSI: 0000000000000027 RDI: ff11000361e1b880 [ 8086.955795] RBP: ffa0000000003da0 R08: 80000000ffff9f45 R09: ffa0000000003d28 [ 8086.955796] R10: ff1100035f840000 R11: 0000000000000028 R12: ff11000319ff8000 [ 8086.955797] R13: ff1100011bb79d60 R14: 00000000ffffffd6 R15: ff1100037039cb00 [ 8086.955798] FS: 0000000000000000(0000) GS:ff11000361e00000(0000) knlGS:0000000000000000 [ 8086.955800] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 8086.955801] CR2: 00007ffff7fca168 CR3: 000000013b08a003 CR4: 0000000000471ef8 [ 8086.955803] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 8086.955803] DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000400 [ 8086.955804] PKRU: 55555554 [ 8086.955805] Call Trace: [ 8086.955806] <IRQ> [ 8086.955808] tcp_wfree+0x112/0x130 [ 8086.955814] skb_release_head_state+0x24/0xa0 [ 8086.955818] napi_consume_skb+0x9c/0x160 [ 8086.955821] igc_poll+0x5d8/0x14d0 [igc] [ 8086.955835] __napi_poll+0x2e/0x1b0 [ 8086.955839] net_rx_action+0x126/0x250 [ 8086.955843] __do_softirq+0xd1/0x295 [ 8086.955846] irq_exit_rcu+0xc5/0xf0 [ 8086.955851] common_interrupt+0x86/0xa0 [ 8086.955857] </IRQ> [ 8086.955857] <TASK> [ 8086.955858] asm_common_interrupt+0x27/0x40 [ 8086.955862] RIP: 0010:cpuidle_enter_state+0xd3/0x3e0 [ 8086.955866] Code: 73 f1 ff ff 49 89 c6 8b 05 e2 ca a7 00 85 c0 0f 8f b3 02 00 00 31 ff e8 1b de 75 ff 80 7d d7 00 0f 85 cd 01 00 00 fb 45 85 ff <0f> 88 fd 00 00 00 49 63 cf 4c 2b 75 c8 48 8d 04 49 48 89 ca 48 8d [ 8086.955867] RSP: 0018:ffffffff82203df0 EFLAGS: 00000202 [ 8086.955869] RAX: ff11000361e2a200 RBX: 0000000000000002 RCX: 000000000000001f [ 8086.955870] RDX: 0000000000000000 RSI: 000000003cf3cf3d RDI: 0000000000000000 [ 8086.955871] RBP: ffffffff82203e28 R08: 0000075ae38471c8 R09: 0000000000000018 [ 8086.955872] R10: 000000000000031a R11: ffffffff8238dca0 R12: ffd1ffffff200000 [ 8086.955873] R13: ffffffff8238dca0 R14: 0000075ae38471c8 R15: 0000000000000002 [ 8086.955875] cpuidle_enter+0x2e/0x50 [ 8086.955880] call_cpuidle+0x23/0x40 [ 8086.955884] do_idle+0x1be/0x220 [ 8086.955887] cpu_startup_entry+0x20/0x30 [ 8086.955889] rest_init+0xb5/0xc0 [ 8086.955892] arch_call_rest_init+0xe/0x30 [ 8086.955895] start_kernel+0x448/0x760 [ 8086.955898] x86_64_start_kernel+0x109/0x150 [ 8086.955900] secondary_startup_64_no_verify+0xe0/0xeb [ 8086.955904] </TASK> [ 8086.955904] ---[ end trace 0000000000000000 ]--- [ 8086.955912] ------------[ cut here ]------------ [ 8086.955913] kernel BUG at lib/dynamic_queue_limits.c:27! [ 8086.955918] invalid opcode: 0000 [#1] SMP [ 8086.955922] RIP: 0010:dql_completed+0x148/0x160 [ 8086.955925] Code: c9 00 48 89 57 58 e9 46 ff ff ff 45 85 e4 41 0f 95 c4 41 39 db 0f 95 c1 41 84 cc 74 05 45 85 ed 78 0a 44 89 c1 e9 27 ff ff ff <0f> 0b 01 f6 44 89 c1 29 f1 0f 48 ca eb 8c cc cc cc cc cc cc cc cc [ 8086.955927] RSP: 0018:ffa0000000003e00 EFLAGS: 00010287 [ 8086.955928] RAX: 000000000000006c RBX: ffa0000003eb0f78 RCX: ff11000109938000 [ 8086.955929] RDX: 0000000000000003 RSI: 0000000000000160 RDI: ff110001002e9480 [ 8086.955930] RBP: ffa0000000003ed8 R08: ff110001002e93c0 R09: ffa0000000003d28 [ 8086.955931] R10: 0000000000007cc0 R11: 0000000000007c54 R12: 00000000ffffffd9 [ 8086.955932] R13: ff1100037039cb00 R14: 00000000ffffffd9 R15: ff1100037039c048 [ 8086.955933] FS: 0000000000000000(0000) GS:ff11000361e00000(0000) knlGS:0000000000000000 [ 8086.955934] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 8086.955935] CR2: 00007ffff7fca168 CR3: 000000013b08a003 CR4: 0000000000471ef8 [ 8086.955936] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 8086.955937] DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000400 [ 8086.955938] PKRU: 55555554 [ 8086.955939] Call Trace: [ 8086.955939] <IRQ> [ 8086.955940] ? igc_poll+0x1a9/0x14d0 [igc] [ 8086.955949] __napi_poll+0x2e/0x1b0 [ 8086.955952] net_rx_action+0x126/0x250 [ 8086.955956] __do_softirq+0xd1/0x295 [ 8086.955958] irq_exit_rcu+0xc5/0xf0 [ 8086.955961] common_interrupt+0x86/0xa0 [ 8086.955964] </IRQ> [ 8086.955965] <TASK> [ 8086.955965] asm_common_interrupt+0x27/0x40 [ 8086.955968] RIP: 0010:cpuidle_enter_state+0xd3/0x3e0 [ 8086.955971] Code: 73 f1 ff ff 49 89 c6 8b 05 e2 ca a7 00 85 c0 0f 8f b3 02 00 00 31 ff e8 1b de 75 ff 80 7d d7 00 0f 85 cd 01 00 00 fb 45 85 ff <0f> 88 fd 00 00 00 49 63 cf 4c 2b 75 c8 48 8d 04 49 48 89 ca 48 8d [ 8086.955972] RSP: 0018:ffffffff82203df0 EFLAGS: 00000202 [ 8086.955973] RAX: ff11000361e2a200 RBX: 0000000000000002 RCX: 000000000000001f [ 8086.955974] RDX: 0000000000000000 RSI: 000000003cf3cf3d RDI: 0000000000000000 [ 8086.955974] RBP: ffffffff82203e28 R08: 0000075ae38471c8 R09: 0000000000000018 [ 8086.955975] R10: 000000000000031a R11: ffffffff8238dca0 R12: ffd1ffffff200000 [ 8086.955976] R13: ffffffff8238dca0 R14: 0000075ae38471c8 R15: 0000000000000002 [ 8086.955978] cpuidle_enter+0x2e/0x50 [ 8086.955981] call_cpuidle+0x23/0x40 [ 8086.955984] do_idle+0x1be/0x220 [ 8086.955985] cpu_startup_entry+0x20/0x30 [ 8086.955987] rest_init+0xb5/0xc0 [ 8086.955990] arch_call_rest_init+0xe/0x30 [ 8086.955992] start_kernel+0x448/0x760 [ 8086.955994] x86_64_start_kernel+0x109/0x150 [ 8086.955996] secondary_startup_64_no_verify+0xe0/0xeb [ 8086.955998] </TASK> [ 8086.955999] Modules linked in: xt_conntrack nft_chain_nat xt_MASQUERADE xt_addrtype nft_compat nf_tables nfnetlink br_netfilter bridge stp llc overlay dm_mod emrcha(PO) emriio(PO) rktpm(PO) cegbuf_mod(PO) patch_update(PO) se(PO) sgx_tgts(PO) mktme(PO) keylocker(PO) svtdx(PO) svfs_pci_hotplug(PO) vtd_mod(PO) davemem(PO) svmabort(PO) svindexio(PO) usbx2(PO) ehci_sched(PO) svheartbeat(PO) ioapic(PO) sv8259(PO) svintr(PO) lt(PO) pcierootport(PO) enginefw_mod(PO) ata(PO) smbus(PO) spiflash_cdf(PO) arden(PO) dsa_iax(PO) oobmsm_punit(PO) cpm(PO) svkdb(PO) ebg_pch(PO) pch(PO) sviotargets(PO) svbdf(PO) svmem(PO) svbios(PO) dram(PO) svtsc(PO) targets(PO) superio(PO) svkernel(PO) cswitch(PO) mcf(PO) pentiumIII_mod(PO) fs_svfs(PO) mdevdefdb(PO) svfs_os_services(O) ixgbe mdio mdio_devres libphy emeraldrapids_svdefs(PO) regsupport(O) libnvdimm nls_cp437 snd_hda_codec_realtek snd_hda_codec_generic ledtrig_audio snd_hda_intel snd_intel_dspcfg snd_hda_codec snd_hwdep x86_pkg_temp_thermal snd_hda_core snd_pcm snd_timer isst_if_mbox_pci [ 8086.956029] input_leds isst_if_mmio sg snd isst_if_common soundcore wmi button sad9(O) drm fuse backlight configfs efivarfs ip_tables x_tables vmd sdhci led_class rtl8150 r8152 hid_generic pegasus mmc_block usbhid mmc_core hid megaraid_sas ixgb igb i2c_algo_bit ice i40e hpsa scsi_transport_sas e1000e e1000 e100 ax88179_178a usbnet xhci_pci sd_mod xhci_hcd t10_pi crc32c_intel crc64_rocksoft igc crc64 crc_t10dif usbcore crct10dif_generic ptp crct10dif_common usb_common pps_core [16762.543675] INFO: NMI handler (kgdb_nmi_handler) took too long to run: 8675587.593 msecs [16762.543678] INFO: NMI handler (kgdb_nmi_handler) took too long to run: 8675587.595 msecs [16762.543673] INFO: NMI handler (kgdb_nmi_handler) took too long to run: 8675587.495 msecs [16762.543679] INFO: NMI handler (kgdb_nmi_handler) took too long to run: 8675587.599 msecs [16762.543678] INFO: NMI handler (kgdb_nmi_handler) took too long to run: 8675587.598 msecs [16762.543690] INFO: NMI handler (kgdb_nmi_handler) took too long to run: 8675587.605 msecs [16762.543684] INFO: NMI handler (kgdb_nmi_handler) took too long to run: 8675587.599 msecs [16762.543693] INFO: NMI handler (kgdb_nmi_handler) took too long to run: 8675587.613 msecs [16762.543784] ---[ end trace 0000000000000000 ]--- [16762.849099] RIP: 0010:dql_completed+0x148/0x160 PANIC: Fatal exception in interrupt Fixes: 9b275176270e ("igc: Add ndo_tx_timeout support") Tested-by: Alejandra Victoria Alcaraz <alejandra.victoria.alcaraz@intel.com> Signed-off-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com> Acked-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-07-26net: dsa: qca8k: fix mdb add/del case with 0 VIDChristian Marangi
The qca8k switch doesn't support using 0 as VID and require a default VID to be always set. MDB add/del function doesn't currently handle this and are currently setting the default VID. Fix this by correctly handling this corner case and internally use the default VID for VID 0 case. Fixes: ba8f870dfa63 ("net: dsa: qca8k: add support for mdb_add/del") Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2023-07-26net: dsa: qca8k: fix broken search_and_delChristian Marangi
On deleting an MDB entry for a port, fdb_search_and_del is used. An FDB entry can't be modified so it needs to be deleted and readded again with the new portmap (and the port deleted as requested) We use the SEARCH operator to search the entry to edit by vid and mac address and then we check the aging if we actually found an entry. Currently the code suffer from a bug where the searched fdb entry is never read again with the found values (if found) resulting in the code always returning -EINVAL as aging was always 0. Fix this by correctly read the fdb entry after it was searched. Fixes: ba8f870dfa63 ("net: dsa: qca8k: add support for mdb_add/del") Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2023-07-26net: dsa: qca8k: fix search_and_insert wrong handling of new ruleChristian Marangi
On inserting a mdb entry, fdb_search_and_insert is used to add a port to the qca8k target entry in the FDB db. A FDB entry can't be modified so it needs to be removed and insert again with the new values. To detect if an entry already exist, the SEARCH operation is used and we check the aging of the entry. If the entry is not 0, the entry exist and we proceed to delete it. Current code have 2 main problem: - The condition to check if the FDB entry exist is wrong and should be the opposite. - When a FDB entry doesn't exist, aging was never actually set to the STATIC value resulting in allocating an invalid entry. Fix both problem by adding aging support to the function, calling the function with STATIC as aging by default and finally by correct the condition to check if the entry actually exist. Fixes: ba8f870dfa63 ("net: dsa: qca8k: add support for mdb_add/del") Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2023-07-26net: dsa: qca8k: enable use_single_write for qca8xxxChristian Marangi
The qca8xxx switch supports 2 way to write reg values, a slow way using mdio and a fast way by sending specially crafted mgmt packet to read/write reg. The fast way can support up to 32 bytes of data as eth packet are used to send/receive. This correctly works for almost the entire regmap of the switch but with the use of some kernel selftests for dsa drivers it was found a funny and interesting hw defect/limitation. For some specific reg, bulk write won't work and will result in writing only part of the requested regs resulting in half data written. This was especially hard to track and discover due to the total strangeness of the problem and also by the specific regs where this occurs. This occurs in the specific regs of the ATU table, where multiple entry needs to be written to compose the entire entry. It was discovered that with a bulk write of 12 bytes on QCA8K_REG_ATU_DATA0 only QCA8K_REG_ATU_DATA0 and QCA8K_REG_ATU_DATA2 were written, but QCA8K_REG_ATU_DATA1 was always zero. Tcpdump was used to make sure the specially crafted packet was correct and this was confirmed. The problem was hard to track as the lack of QCA8K_REG_ATU_DATA1 resulted in an entry somehow possible as the first bytes of the mac address are set in QCA8K_REG_ATU_DATA0 and the entry type is set in QCA8K_REG_ATU_DATA2. Funlly enough writing QCA8K_REG_ATU_DATA1 results in the same problem with QCA8K_REG_ATU_DATA2 empty and QCA8K_REG_ATU_DATA1 and QCA8K_REG_ATU_FUNC correctly written. A speculation on the problem might be that there are some kind of indirection internally when accessing these regs and they can't be accessed all together, due to the fact that it's really a table mapped somewhere in the switch SRAM. Even more funny is the fact that every other reg was tested with all kind of combination and they are not affected by this problem. Read operation was also tested and always worked so it's not affected by this problem. The problem is not present if we limit writing a single reg at times. To handle this hardware defect, enable use_single_write so that bulk api can correctly split the write in multiple different operation effectively reverting to a non-bulk write. Cc: Mark Brown <broonie@kernel.org> Fixes: c766e077d927 ("net: dsa: qca8k: convert to regmap read/write API") Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2023-07-26misc/genalloc: Name subpools by of_node_full_name()Linus Walleij
A previous commit tried to come up with more generic subpool names, but this isn't quite working: the node name was used elsewhere to match pools to consumers which regressed the nVidia Tegra 2/3 video decoder. Revert back to an earlier approach using of_node_full_name() instead of just the name to make sure the pool name is more unique, and change both sites using this in the kernel. It is not perfect since two SRAM nodes could have the same subpool name but it makes the situation better than before. Reported-by: Dmitry Osipenko <digetx@gmail.com> Fixes: 21e5a2d10c8f ("misc: sram: Generate unique names for subpools") Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Tested-by: Dmitry Osipenko <digetx@gmail.com> Link: https://lore.kernel.org/r/20230622074520.3058027-1-linus.walleij@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-07-26Revert "wifi: ath6k: silence false positive -Wno-dangling-pointer warning on ↵Kalle Valo
GCC 12" This reverts commit bd1d129daa3ede265a880e2c6a7f91eab0f4dc62. The dangling-pointer warnings were disabled kernel-wide by commit 49beadbd47c2 ("gcc-12: disable '-Wdangling-pointer' warning for now") for v5.19. So this hack in ath6kl is not needed anymore. Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230724100823.2948804-1-kvalo@kernel.org
2023-07-26Revert "wifi: ath11k: Enable threaded NAPI"Kalle Valo
This reverts commit 13aa2fb692d3717767303817f35b3e650109add3. This commit broke QCN9074 initialisation: [ 358.960477] ath11k_pci 0000:04:00.0: ce desc not available for wmi command 36866 [ 358.960481] ath11k_pci 0000:04:00.0: failed to send WMI_STA_POWERSAVE_PARAM_CMDID [ 358.960484] ath11k_pci 0000:04:00.0: could not set uapsd params -105 As there's no fix available let's just revert it to get QCN9074 working again. Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217536 Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230720151444.2016637-1-kvalo@kernel.org
2023-07-26xen/evtchn: Introduce new IOCTL to bind static evtchnRahul Singh
Xen 4.17 supports the creation of static evtchns. To allow user space application to bind static evtchns introduce new ioctl "IOCTL_EVTCHN_BIND_STATIC". Existing IOCTL doing more than binding that’s why we need to introduce the new IOCTL to only bind the static event channels. Static evtchns to be available for use during the lifetime of the guest. When the application exits, __unbind_from_irq() ends up being called from release() file operations because of that static evtchns are getting closed. To avoid closing the static event channel, add the new bool variable "is_static" in "struct irq_info" to mark the event channel static when creating the event channel to avoid closing the static evtchn. Also, take this opportunity to remove the open-coded version of the evtchn close in drivers/xen/evtchn.c file and use xen_evtchn_close(). Signed-off-by: Rahul Singh <rahul.singh@arm.com> Reviewed-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com> Acked-by: Stefano Stabellini <sstabellini@kernel.org> Link: https://lore.kernel.org/r/ae7329bf1713f83e4aad4f3fa0f316258c40a3e9.1689677042.git.rahul.singh@arm.com Signed-off-by: Juergen Gross <jgross@suse.com>
2023-07-25net: ipa: only reset hashed tables when supportedAlex Elder
Last year, the code that manages GSI channel transactions switched from using spinlock-protected linked lists to using indexes into the ring buffer used for a channel. Recently, Google reported seeing transaction reference count underflows occasionally during shutdown. Doug Anderson found a way to reproduce the issue reliably, and bisected the issue to the commit that eliminated the linked lists and the lock. The root cause was ultimately determined to be related to unused transactions being committed as part of the modem shutdown cleanup activity. Unused transactions are not normally expected (except in error cases). The modem uses some ranges of IPA-resident memory, and whenever it shuts down we zero those ranges. In ipa_filter_reset_table() a transaction is allocated to zero modem filter table entries. If hashing is not supported, hashed table memory should not be zeroed. But currently nothing prevents that, and the result is an unused transaction. Something similar occurs when we zero routing table entries for the modem. By preventing any attempt to clear hashed tables when hashing is not supported, the reference count underflow is avoided in this case. Note that there likely remains an issue with properly freeing unused transactions (if they occur due to errors). This patch addresses only the underflows that Google originally reported. Cc: <stable@vger.kernel.org> # 6.1.x Fixes: d338ae28d8a8 ("net: ipa: kill all other transaction lists") Tested-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Alex Elder <elder@linaro.org> Link: https://lore.kernel.org/r/20230724224055.1688854-1-elder@linaro.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-07-25macvlan: add forgotten nla_policy for IFLA_MACVLAN_BC_CUTOFFLin Ma
The previous commit 954d1fa1ac93 ("macvlan: Add netlink attribute for broadcast cutoff") added one additional attribute named IFLA_MACVLAN_BC_CUTOFF to allow broadcast cutfoff. However, it forgot to describe the nla_policy at macvlan_policy (drivers/net/macvlan.c). Hence, this suppose NLA_S32 (4 bytes) integer can be faked as empty (0 bytes) by a malicious user, which could leads to OOB in heap just like CVE-2023-3773. To fix it, this commit just completes the nla_policy description for IFLA_MACVLAN_BC_CUTOFF. This enforces the length check and avoids the potential OOB read. Fixes: 954d1fa1ac93 ("macvlan: Add netlink attribute for broadcast cutoff") Signed-off-by: Lin Ma <linma@zju.edu.cn> Reviewed-by: Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/20230723080205.3715164-1-linma@zju.edu.cn Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-07-25scsi: pm80xx: Fix error return code in pm8001_pci_probe()Yang Yingliang
If pm8001_init_sas_add() fails, return error code in pm8001_pci_probe(). Fixes: 14a8f116cdc0 ("scsi: pm80xx: Add GET_NVMD timeout during probe") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20230725125706.566990-1-yangyingliang@huawei.com Reviewed-by: Igor Pylypiv <ipylypiv@google.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-07-25scsi: zfcp: Defer fc_rport blocking until after ADISC responseSteffen Maier
Storage devices are free to send RSCNs, e.g. for internal state changes. If this happens on all connected paths, zfcp risks temporarily losing all paths at the same time. This has strong requirements on multipath configuration such as "no_path_retry queue". Avoid such situations by deferring fc_rport blocking until after the ADISC response, when any actual state change of the remote port became clear. The already existing port recovery triggers explicitly block the fc_rport. The triggers are: on ADISC reject or timeout (typical cable pull case), and on ADISC indicating that the remote port has changed its WWPN or the port is meanwhile no longer open. As a side effect, this also removes a confusing direct function call to another work item function zfcp_scsi_rport_work() instead of scheduling that other work item. It was probably done that way to have the rport block side effect immediate and synchronous to the caller. Fixes: a2fa0aede07c ("[SCSI] zfcp: Block FC transport rports early on errors") Cc: stable@vger.kernel.org #v2.6.30+ Reviewed-by: Benjamin Block <bblock@linux.ibm.com> Reviewed-by: Fedor Loshakov <loshakov@linux.ibm.com> Signed-off-by: Steffen Maier <maier@linux.ibm.com> Link: https://lore.kernel.org/r/20230724145156.3920244-1-maier@linux.ibm.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-07-26ata: pata_octeon_cf: fix error return code in octeon_cf_probe()Yang Yingliang
The variable 'rv' is set to 0 after calling of_property_read_reg(), so it cannot be used as an error code. Change to using correct error codes in the error path. Fixes: d0b2461678b1 ("ata: Use of_property_read_reg() to parse "reg"") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
2023-07-26ata: pata_arasan_cf: Use dev_err_probe() instead dev_err() in data_xfer()Minjie Du
It is possible for dma_request_chan() to return EPROBE_DEFER, which means acdev->host->dev is not ready yet. At this point dev_err() will have no output. Use dev_err_probe() instead. Signed-off-by: Minjie Du <duminjie@vivo.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru> Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
2023-07-25drm/amdgpu: Restore HQD persistent state registerLijo Lazar
On GFX v9.4.3, compute queue MQD is populated using the values in HQD persistent state register. Hence don't clear the values on module unload, instead restore it to the default reset value so that MQD is initialized correctly during next module load. In particular, preload flag needs to be set on compute queue MQD, otherwise it could cause uninitialized values being used at device reset state resulting in EDC. Signed-off-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Asad Kamal <asad.kamal@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-07-25drm/amd/display: Unlock on error path in ↵Dan Carpenter
dm_handle_mst_sideband_msg_ready_event() This error path needs to unlock the "aconnector->handle_mst_msg_ready" mutex before returning. Fixes: 4f6d9e38c4d2 ("drm/amd/display: Add polling method to handle MST reply packet") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-07-25drm/amd/display: Exit idle optimizations before attempt to access PHYLeo Chen
[Why & How] DMUB may hang when powering down pixel clocks due to no dprefclk. It is fixed by exiting idle optimization before the attempt to access PHY. Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Leo Chen <sancchen@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-07-25drm/amd/display: Don't apply FIFO resync W/A if rdivider = 0Alvin Lee
[Description] It is not valid to set the WDIVIDER value to 0, so do not re-write to DISPCLK_WDIVIDER if the current value is 0 (i.e., it is at it's initial value and we have not made any requests to change DISPCLK yet). Reviewed-by: Saaem Rizvi <syedsaaem.rizvi@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alvin Lee <alvin.lee2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-07-25drm/amd/display: Guard DCN31 PHYD32CLK logic against chip familyGeorge Shen
[Why] Current yellow carp B0 PHYD32CLK logic is incorrectly applied to other ASICs. [How] Add guard to check chip family is yellow carp before applying logic. Reviewed-by: Hansen Dsouza <hansen.dsouza@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: George Shen <george.shen@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-07-25drm/amd/smu: use AverageGfxclkFrequency* to replace previous GFX Curr ClockJane Jian
Report current GFX clock also from average clock value as the original CurrClock data is not valid/accurate any more as per FW team Signed-off-by: Jane Jian <Jane.Jian@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-07-25drm/amd: Fix an error handling mistake in psp_sw_init()Mario Limonciello
If the second call to amdgpu_bo_create_kernel() fails, the memory allocated from the first call should be cleared. If the third call fails, the memory from the second call should be cleared. Fixes: b95b5391684b ("drm/amdgpu/psp: move PSP memory alloc from hw_init to sw_init") Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit (git 2.34.1) at 2025-09-11 09:13:14 +0000