summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2024-03-05perf: starfive: Only allow COMPILE_TEST for 64-bit architecturesWill Deacon
The kbuild robot exploded while wasting its time building the Starfive PMU driver for the 32-bit PA-RISC and Hexagon architectures. Adjust the Kconfig dependencies so that COMPILE_TEST is only applicable for 64-bit architectures (which implement writeq()). Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Will Deacon <will@kernel.org>
2024-03-05mfd: cs42l43: Fix wrong GPIO_FN_SEL and SPI_CLK_CONFIG1 defaultsMaciej Strozek
Two regs have wrong values in existing fields, change them to match the datasheet. Fixes: ace6d1448138 ("mfd: cs42l43: Add support for cs42l43 core driver") Signed-off-by: Maciej Strozek <mstrozek@opensource.cirrus.com> Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20240301101547.2136948-1-mstrozek@opensource.cirrus.com Signed-off-by: Lee Jones <lee@kernel.org>
2024-03-05vhost/net: remove vhost_net_page_frag_refill()Yunsheng Lin
The page frag in vhost_net_page_frag_refill() uses the 'struct page_frag' from skb_page_frag_refill(), but it's implementation is similar to page_frag_alloc_align() now. This patch removes vhost_net_page_frag_refill() by using 'struct page_frag_cache' instead of 'struct page_frag', and allocating frag using page_frag_alloc_align(). The added benefit is that not only unifying the page frag implementation a little, but also having about 0.5% performance boost testing by using the vhost_net_test introduced in the last patch. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Acked-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-03-05net: introduce page_frag_cache_drain()Yunsheng Lin
When draining a page_frag_cache, most user are doing the similar steps, so introduce an API to avoid code duplication. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Acked-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Alexander Duyck <alexanderduyck@fb.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-03-05page_frag: unify gfp bits for order 3 page allocationYunsheng Lin
Currently there seems to be three page frag implementations which all try to allocate order 3 page, if that fails, it then fail back to allocate order 0 page, and each of them all allow order 3 page allocation to fail under certain condition by using specific gfp bits. The gfp bits for order 3 page allocation are different between different implementation, __GFP_NOMEMALLOC is or'd to forbid access to emergency reserves memory for __page_frag_cache_refill(), but it is not or'd in other implementions, __GFP_DIRECT_RECLAIM is masked off to avoid direct reclaim in vhost_net_page_frag_refill(), but it is not masked off in __page_frag_cache_refill(). This patch unifies the gfp bits used between different implementions by or'ing __GFP_NOMEMALLOC and masking off __GFP_DIRECT_RECLAIM for order 3 page allocation to avoid possible pressure for mm. Leave the gfp unifying for page frag implementation in sock.c for now as suggested by Paolo Abeni. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Reviewed-by: Alexander Duyck <alexanderduyck@fb.com> CC: Alexander Duyck <alexander.duyck@gmail.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-03-05net: txgbe: fix to clear interrupt status after handling IRQJiawen Wu
GPIO EOI is not set to clear interrupt status after handling the interrupt. It should be done in irq_chip->irq_ack, but this function is not called in handle_nested_irq(). So executing function txgbe_gpio_irq_ack() manually in txgbe_gpio_irq_handler(). Fixes: aefd013624a1 ("net: txgbe: use irq_domain for interrupt controller") Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com> Link: https://lore.kernel.org/r/20240301092956.18544-2-jiawenwu@trustnetic.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-03-05net: txgbe: fix GPIO interrupt blockingJiawen Wu
The register of GPIO interrupt status is masked before MAC IRQ is enabled. This is because of hardware deficiency. So manually clear the interrupt status before using them. Otherwise, GPIO interrupts will never be reported again. There is a workaround for clearing interrupts to set GPIO EOI in txgbe_up_complete(). Fixes: aefd013624a1 ("net: txgbe: use irq_domain for interrupt controller") Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com> Link: https://lore.kernel.org/r/20240301092956.18544-1-jiawenwu@trustnetic.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-03-05drm/i915: Don't explode when the dig port we don't have an AUX CHVille Syrjälä
The icl+ power well code currently assumes that every AUX power well maps to an encoder which is using said power well. That is by no menas guaranteed as we: - only register encoders for ports declared in the VBT - combo PHY HDMI-only encoder no longer get an AUX CH since commit 9856308c94ca ("drm/i915: Only populate aux_ch if really needed") However we have places such as intel_power_domains_sanitize_state() that blindly traverse all the possible power wells. So these bits of code may very well encounbter an aux power well with no associated encoder. In this particular case the BIOS seems to have left one AUX power well enabled even though we're dealing with a HDMI only encoder on a combo PHY. We then proceed to turn off said power well and explode when we can't find a matching encoder. As a short term fix we should be able to just skip the PHY related parts of the power well programming since we know this situation can only happen with combo PHYs. Another option might be to go back to always picking an AUX CH for all encoders. However I'm a bit wary about that since we might in theory end up conflicting with the VBT AUX CH assignment. Also that wouldn't help with encoders not declared in the VBT, should we ever need to poke the corresponding power wells. Longer term we need to figure out what the actual relationship is between the PHY vs. AUX CH vs. AUX power well. Currently this is entirely unclear. Cc: stable@vger.kernel.org Fixes: 9856308c94ca ("drm/i915: Only populate aux_ch if really needed") Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/10184 Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240223203216.15210-1-ville.syrjala@linux.intel.com Reviewed-by: Imre Deak <imre.deak@intel.com> (cherry picked from commit 6a8c66bf0e565c34ad0a18f820e0bb17951f7f91) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2024-03-05platform/x86/amd/pmf: Fix missing error code in amd_pmf_init_smart_pc()Harshit Mogalapalli
On the error path, assign -ENOMEM to ret when memory allocation of "dev->prev_data" fails. Fixes: e70961505808 ("platform/x86/amd/pmf: Fixup error handling for amd_pmf_init_smart_pc()") Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Link: https://lore.kernel.org/r/20240226144011.2100804-1-harshit.m.mogalapalli@oracle.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2024-03-05platform/x86: p2sb: On Goldmont only cache P2SB and SPI devfn BARHans de Goede
On Goldmont p2sb_bar() only ever gets called for 2 devices, the actual P2SB devfn 13,0 and the SPI controller which is part of the P2SB, devfn 13,2. But the current p2sb code tries to cache BAR0 info for all of devfn 13,0 to 13,7 . This involves calling pci_scan_single_device() for device 13 functions 0-7 and the hw does not seem to like pci_scan_single_device() getting called for some of the other hidden devices. E.g. on an ASUS VivoBook D540NV-GQ065T this leads to continuous ACPI errors leading to high CPU usage. Fix this by only caching BAR0 info and thus only calling pci_scan_single_device() for the P2SB and the SPI controller. Fixes: 5913320eb0b3 ("platform/x86: p2sb: Allow p2sb_bar() calls during PCI device probe") Reported-by: Danil Rybakov <danilrybakov249@gmail.com> Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218531 Tested-by: Danil Rybakov <danilrybakov249@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20240304134356.305375-2-hdegoede@redhat.com
2024-03-05Merge tag 'drm-intel-fixes-2024-03-01' of ↵Daniel Vetter
https://anongit.freedesktop.org/git/drm/drm-intel into drm-fixes - Fix to extract HDCP information from primary connector - Check for NULL mmu_interval_notifier before removing Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/ZeGOUTfiA0_FNKLg@jlahtine-mobl.ger.corp.intel.com
2024-03-05usb: Export BOS descriptor to sysfsElbert Mai
Motivation ---------- The binary device object store (BOS) of a USB device consists of the BOS descriptor followed by a set of device capability descriptors. One that is of interest to users is the platform descriptor. This contains a 128-bit UUID and arbitrary data, and it allows parties outside of USB-IF to add additional metadata about a USB device in a standards-compliant manner. Notable examples include the WebUSB and Microsoft OS 2.0 descriptors. The kernel already retrieves and caches the BOS from USB devices if its bcdUSB is >= 0x0201. Because the BOS is flexible and extensible, we export the entire BOS to sysfs so users can retrieve whatever device capabilities they desire, without requiring USB I/O or elevated permissions. Implementation -------------- Add bos_descriptors attribute to sysfs. This is a binary file and it works the same way as the existing descriptors attribute. The file exists only if the BOS is present in the USB device. Also create a binary attribute group, so the driver core can handle the creation of both the descriptors and bos_descriptors attributes in sysfs. Signed-off-by: Elbert Mai <code@elbertmai.com> Link: https://lore.kernel.org/r/20240305002301.95323-1-code@elbertmai.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-03-05USB: serial: cp210x: add pid/vid for TDK NC0110013M and MM0110113MToru Katagiri
TDK NC0110013M and MM0110113M have custom USB IDs for CP210x, so we need to add them to the driver. Signed-off-by: Toru Katagiri <Toru.Katagiri@tdk.com> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org>
2024-03-04Merge tag 'mlx5-fixes-2024-03-01' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== mlx5 fixes 2024-03-01 This series provides bug fixes to mlx5 driver. Please pull and let me know if there is any problem. * tag 'mlx5-fixes-2024-03-01' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux: net/mlx5e: Switch to using _bh variant of of spinlock API in port timestamping NAPI poll context net/mlx5e: Use a memory barrier to enforce PTP WQ xmit submission tracking occurs after populating the metadata_map net/mlx5e: Fix MACsec state loss upon state update in offload path net/mlx5e: Change the warning when ignore_flow_level is not supported net/mlx5: Check capability for fw_reset net/mlx5: Fix fw reporter diagnose output net/mlx5: E-switch, Change flow rule destination checking Revert "net/mlx5e: Check the number of elements before walk TC rhashtable" Revert "net/mlx5: Block entering switchdev mode with ns inconsistency" ==================== Link: https://lore.kernel.org/r/20240302070318.62997-1-saeed@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-03-04Merge branch '10GbE' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2024-03-01 (ixgbe, i40e, ice) This series contains updates to ixgbe, i40e, and ice drivers. Maciej corrects disable flow for ixgbe, i40e, and ice drivers which could cause non-functional interface with AF_XDP. Michal restores host configuration when changing MSI-X count for VFs on ice driver. * '10GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue: ice: reconfig host after changing MSI-X on VF ice: reorder disabling IRQ and NAPI in ice_qp_dis i40e: disable NAPI right after disabling irqs when handling xsk_pool ixgbe: {dis, en}able irqs in ixgbe_txrx_ring_{dis, en}able ==================== Link: https://lore.kernel.org/r/20240301192549.2993798-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-03-04e1000e: Minor flow correction in e1000_shutdown functionVitaly Lifshits
Add curly braces to avoid entering to an if statement where it is not always required in e1000_shutdown function. This improves code readability and might prevent non-deterministic behaviour in the future. Signed-off-by: Vitaly Lifshits <vitaly.lifshits@intel.com> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20240301184806.2634508-5-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-03-04igc: fix LEDS_CLASS dependencyArnd Bergmann
When IGC is built-in but LEDS_CLASS is a loadable module, there is a link failure: x86_64-linux-ld: drivers/net/ethernet/intel/igc/igc_leds.o: in function `igc_led_setup': igc_leds.c:(.text+0x75c): undefined reference to `devm_led_classdev_register_ext' Add another dependency that prevents this combination. Fixes: ea578703b03d ("igc: Add support for LEDs on i225/i226") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20240301184806.2634508-4-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-03-04ixgbe: Add 1000BASE-BX supportErnesto Castellotti
Added support for 1000BASE-BX, i.e. Gigabit Ethernet over single strand of single-mode fiber. The initialization of a 1000BASE-BX SFP is the same as 1000BASE-SX/LX with the only difference that the Bit Rate Nominal Value must be checked to make sure it is a Gigabit Ethernet transceiver, as described by the SFF-8472 specification. This was tested with the FS.com SFP-GE-BX 1310/1490nm 10km transceiver: $ ethtool -m eth4 Identifier : 0x03 (SFP) Extended identifier : 0x04 (GBIC/SFP defined by 2-wire interface ID) Connector : 0x07 (LC) Transceiver codes : 0x00 0x00 0x00 0x40 0x00 0x00 0x00 0x00 0x00 Transceiver type : Ethernet: BASE-BX10 Encoding : 0x01 (8B/10B) BR, Nominal : 1300MBd Rate identifier : 0x00 (unspecified) Length (SMF,km) : 10km Length (SMF) : 10000m Length (50um) : 0m Length (62.5um) : 0m Length (Copper) : 0m Length (OM3) : 0m Laser wavelength : 1310nm Vendor name : FS Vendor OUI : 64:9d:99 Vendor PN : SFP-GE-BX Vendor rev : Option values : 0x20 0x0a Option : RX_LOS implemented Option : TX_FAULT implemented Option : Power level 3 requirement BR margin, max : 0% BR margin, min : 0% Vendor SN : S2202359108 Date code : 220307 Optical diagnostics support : Yes Laser bias current : 17.650 mA Laser output power : 0.2132 mW / -6.71 dBm Receiver signal average optical power : 0.2740 mW / -5.62 dBm Module temperature : 47.30 degrees C / 117.13 degrees F Module voltage : 3.2576 V Alarm/warning flags implemented : Yes Laser bias current high alarm : Off Laser bias current low alarm : Off Laser bias current high warning : Off Laser bias current low warning : Off Laser output power high alarm : Off Laser output power low alarm : Off Laser output power high warning : Off Laser output power low warning : Off Module temperature high alarm : Off Module temperature low alarm : Off Module temperature high warning : Off Module temperature low warning : Off Module voltage high alarm : Off Module voltage low alarm : Off Module voltage high warning : Off Module voltage low warning : Off Laser rx power high alarm : Off Laser rx power low alarm : Off Laser rx power high warning : Off Laser rx power low warning : Off Laser bias current high alarm threshold : 110.000 mA Laser bias current low alarm threshold : 1.000 mA Laser bias current high warning threshold : 100.000 mA Laser bias current low warning threshold : 1.000 mA Laser output power high alarm threshold : 0.7079 mW / -1.50 dBm Laser output power low alarm threshold : 0.0891 mW / -10.50 dBm Laser output power high warning threshold : 0.6310 mW / -2.00 dBm Laser output power low warning threshold : 0.1000 mW / -10.00 dBm Module temperature high alarm threshold : 90.00 degrees C / 194.00 degrees F Module temperature low alarm threshold : -45.00 degrees C / -49.00 degrees F Module temperature high warning threshold : 85.00 degrees C / 185.00 degrees F Module temperature low warning threshold : -40.00 degrees C / -40.00 degrees F Module voltage high alarm threshold : 3.7950 V Module voltage low alarm threshold : 2.8050 V Module voltage high warning threshold : 3.4650 V Module voltage low warning threshold : 3.1350 V Laser rx power high alarm threshold : 0.7079 mW / -1.50 dBm Laser rx power low alarm threshold : 0.0028 mW / -25.53 dBm Laser rx power high warning threshold : 0.6310 mW / -2.00 dBm Laser rx power low warning threshold : 0.0032 mW / -24.95 dBm Signed-off-by: Ernesto Castellotti <ernesto@castellotti.net> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Tested-by: Sunitha Mekala <sunithax.d.mekala@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20240301184806.2634508-3-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-03-04intel: make module parameters readable in sys filesystemJon Maxwell
Linux users sometimes need an easy way to check current values of module parameters. For example the module may be manually reloaded with different parameters. Make these visible and readable in the /sys filesystem to allow that. But don't make the "debug" module parameter visible as debugging is enabled via ethtool msglvl. Signed-off-by: Jon Maxwell <jmaxwell37@gmail.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20240301184806.2634508-2-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-03-04net: sparx5: Fix use after free inside sparx5_del_mact_entryHoratiu Vultur
Based on the static analyzis of the code it looks like when an entry from the MAC table was removed, the entry was still used after being freed. More precise the vid of the mac_entry was used after calling devm_kfree on the mac_entry. The fix consists in first using the vid of the mac_entry to delete the entry from the HW and after that to free it. Fixes: b37a1bae742f ("net: sparx5: add mactable support") Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20240301080608.3053468-1-horatiu.vultur@microchip.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-03-04dm vdo: remove meaningless version number constantMatthew Sakai
Also remove related log messages. Signed-off-by: Matthew Sakai <msakai@redhat.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2024-03-04dm vdo: remove vdo_perform_onceMatthew Sakai
Remove obsolete function vdo_perform_once. Instead, initialize necessary module state when loading the module. Signed-off-by: Matthew Sakai <msakai@redhat.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2024-03-04zram: zcomp: remove zcomp_set_max_streams() declarationKefeng Wang
The zcomp_set_max_streams() is removed from commit 43209ea2d17a ("zram: remove max_comp_streams internals"), remove the declaration. Link: https://lkml.kernel.org/r/20240223035548.2591882-2-wangkefeng.wang@huawei.com Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Cc: Chengming Zhou <chengming.zhou@linux.dev> Cc: Huacai Chen <chenhuacai@kernel.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Nhat Pham <nphamcs@gmail.com> Cc: Sergey Senozhatsky <senozhatsky@chromium.org> Cc: Yosry Ahmed <yosryahmed@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-03-04Revert "vfio/type1: Unpin zero pages"Alex Williamson
This reverts commit 873aefb376bbc0ed1dd2381ea1d6ec88106fdbd4. This was a heinous workaround and it turns out it's been fixed in mm twice since it was introduced. Most recently, commit c8070b787519 ("mm: Don't pin ZERO_PAGE in pin_user_pages()") would have prevented running up the zeropage refcount, but even before that commit 84209e87c696 ("mm/gup: reliable R/O long-term pinning in COW mappings") avoids the vfio use case from pinning the zeropage at all, instead replacing it with exclusive anonymous pages. Remove this now useless overhead. Suggested-by: David Hildenbrand <david@redhat.com> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Kevin Tian <kevin.tian@intel.com> Link: https://lore.kernel.org/r/20240229223544.257207-1-alex.williamson@redhat.com Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2024-03-04vfio/nvgrace-gpu: Convey kvm to map device memory region as noncachedAnkit Agrawal
The NVIDIA Grace Hopper GPUs have device memory that is supposed to be used as a regular RAM. It is accessible through CPU-GPU chip-to-chip cache coherent interconnect and is present in the system physical address space. The device memory is split into two regions - termed as usemem and resmem - in the system physical address space, with each region mapped and exposed to the VM as a separate fake device BAR [1]. Owing to a hardware defect for Multi-Instance GPU (MIG) feature [2], there is a requirement - as a workaround - for the resmem BAR to display uncached memory characteristics. Based on [3], on system with FWB enabled such as Grace Hopper, the requisite properties (uncached, unaligned access) can be achieved through a VM mapping (S1) of NORMAL_NC and host mapping (S2) of MT_S2_FWB_NORMAL_NC. KVM currently maps the MMIO region in S2 as MT_S2_FWB_DEVICE_nGnRE by default. The fake device BARs thus displays DEVICE_nGnRE behavior in the VM. The following table summarizes the behavior for the various S1 and S2 mapping combinations for systems with FWB enabled [3]. S1 | S2 | Result NORMAL_NC | NORMAL_NC | NORMAL_NC NORMAL_NC | DEVICE_nGnRE | DEVICE_nGnRE Recently a change was added that modifies this default behavior and make KVM map MMIO as MT_S2_FWB_NORMAL_NC when a VMA flag VM_ALLOW_ANY_UNCACHED is set [4]. Setting S2 as MT_S2_FWB_NORMAL_NC provides the desired behavior (uncached, unaligned access) for resmem. To use VM_ALLOW_ANY_UNCACHED flag, the platform must guarantee that no action taken on the MMIO mapping can trigger an uncontained failure. The Grace Hopper satisfies this requirement. So set the VM_ALLOW_ANY_UNCACHED flag in the VMA. Applied over next-20240227. base-commit: 22ba90670a51 Link: https://lore.kernel.org/all/20240220115055.23546-4-ankita@nvidia.com/ [1] Link: https://www.nvidia.com/en-in/technologies/multi-instance-gpu/ [2] Link: https://developer.arm.com/documentation/ddi0487/latest/ section D8.5.5 [3] Link: https://lore.kernel.org/all/20240224150546.368-1-ankita@nvidia.com/ [4] Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Kevin Tian <kevin.tian@intel.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: Vikram Sethi <vsethi@nvidia.com> Cc: Zhi Wang <zhiw@nvidia.com> Signed-off-by: Ankit Agrawal <ankita@nvidia.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Link: https://lore.kernel.org/r/20240229193934.2417-1-ankita@nvidia.com Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2024-03-04Merge branch 'kvm-arm64/vfio-normal-nc' of ↵Alex Williamson
https://git.kernel.org/pub/scm/linux/kernel/git/oupton/linux into v6.9/vfio/next
2024-03-04i2c: cadence: Add system suspend and resume PM supportJi Sheng Teoh
Enable device system suspend and resume PM support, and mark the device state as suspended during system suspend to reject any data transfer. Signed-off-by: Ji Sheng Teoh <jisheng.teoh@starfivetech.com> Reviewed-by: Andi Shyti <andi.shyti@kernel.org> Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
2024-03-04i2c: mpc: remove outdated macroWolfram Sang
DRV_NAME was useful back in the days. But here, being used once, it is only cruft. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Tested-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
2024-03-04i2c: mpc: use proper binding for transfer timeoutsWolfram Sang
"i2c-scl-clk-low-timeout-us" is wrongly used here because it describes maximum clock stretching not maximum transfer time. Additionally, it is deprecated because of issues. Move this driver to the correct binding. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Tested-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
2024-03-04vfio: amba: Rename pl330_ids[] to vfio_amba_ids[]Geert Uytterhoeven
Obviously drivers/vfio/platform/vfio_amba.c started its life as a simplified copy of drivers/dma/pl330.c, but not all variable names were updated. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Link: https://lore.kernel.org/r/1d1b873b59b208547439225aee1f24d6f2512a1f.1708945194.git.geert+renesas@glider.be Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2024-03-04drm/amdgpu: workaround to avoid SET_Q_MODE packets v2Christian König
It turned out that executing the SET_Q_MODE packet on every submission creates to much overhead. Implement a workaround which allows skipping the SET_Q_MODE packet if subsequent submissions all use the same parameters. v2: add a NULL check for ring_obj Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-04drm/amdgpu: cleanup conditional executionChristian König
First of all calculating the number of dw to patch into a conditional execution is not something HW generation specific. This is just standard ring buffer calculations. While at it also reduce the BUG_ON() into WARN_ON(). Then instead of a random bit pattern use 0 as default value for the number of dw skipped, this way it's not mandatory any more to patch the conditional execution. And last make the address to check a parameter of the conditional execution instead of getting this from the ring. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-04drm/amdgpu: Use rpm_mode flag instead of checking it again for rpmMa Jun
Because the rpm_mode flag is already set when the driver is initialized, we use it directly for runtime suspend/resume instead of checking it again Signed-off-by: Ma Jun <Jun.Ma2@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-04drm/amdgpu/pm: Fix the error of pwm1_enable settingMa Jun
Fix the pwm_mode value error which used for pwm1_enable setting Signed-off-by: Ma Jun <Jun.Ma2@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-04drm/amdgpu: change vm->task_info handlingShashank Sharma
This patch changes the handling and lifecycle of vm->task_info object. The major changes are: - vm->task_info is a dynamically allocated ptr now, and its uasge is reference counted. - introducing two new helper funcs for task_info lifecycle management - amdgpu_vm_get_task_info: reference counts up task_info before returning this info - amdgpu_vm_put_task_info: reference counts down task_info - last put to task_info() frees task_info from the vm. This patch also does logistical changes required for existing usage of vm->task_info. V2: Do not block all the prints when task_info not found (Felix) V3: Fixed review comments from Felix - Fix wrong indentation - No debug message for -ENOMEM - Add NULL check for task_info - Do not duplicate the debug messages (ti vs no ti) - Get first reference of task_info in vm_init(), put last in vm_fini() V4: Fixed review comments from Felix - fix double reference increment in create_task_info - change amdgpu_vm_get_task_info_pasid - additional changes in amdgpu_gem.c while porting Cc: Christian Koenig <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Shashank Sharma <shashank.sharma@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-04drm/amd/display: handle range offsets in VRR rangesAlex Deucher
Need to check the offset bits for values greater than 255. v2: also update amdgpu_dm_connector values. Suggested-by: Mano Ségransan <mano.segransan@protonmail.com> Tested-by: Mano Ségransan <mano.segransan@protonmail.com> Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3203 Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-04drm/amd/display: add amdgpu_dm support for DCN351Hamza Mahfooz
Add Display Manager specific changes for DCN3.5.1. Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-04drm/amd/display: add DC changes for DCN351Hamza Mahfooz
Add DC support for DCN 3.5.1. Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-04drm/amd/display: add DCN351 IRQ changesHamza Mahfooz
Add DCN3.5.1 interrupt support. Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-04drm/amd/display: add DMUB source files and changes for DCN351Hamza Mahfooz
DMUB support is required to light-up displays. Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-04drm/amd: add register headers for DCN351Hamza Mahfooz
Add register headers for DCN 3.5.1. Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-04drm/amd/display: add DCN351 version identifiersHamza Mahfooz
Add DCN3.5.1 ASIC identifiers. Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-04Revert "drm/amdgpu: remove vm sanity check from amdgpu_vm_make_compute" for ↵Jesse Zhang
Raven fix the issue: "amdgpu: Failed to create process VM object". [Why]when amdgpu initialized, seq64 do mampping and update bo mapping in vm page table. But when clifo run. It also initializes a vm for a process device through the function kfd_process_device_init_vm and ensure the root PD is clean through the function amdgpu_vm_pt_is_root_clean. So they have a conflict, and clinfo always failed. v1: - remove all the pte_supports_ats stuff from the amdgpu_vm code (Felix) Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-04i2c: smbus: Prepare i2c_register_spd for usage on muxed segmentsHeiner Kallweit
If this is an adapter on a muxed bus segment, assume that each segment is connected to a subset of the (> 8) overall memory slots. In this case let's probe the maximum of 8 slots, however stop if the number of overall populated slots is reached. If we're not on a muxed segment and the total number of slots is > 8, then warn because then not all SPD eeproms can be addressed. Presumably the bus is muxed, but the mux config is missing. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> [wsa: removed a superfluous printout] Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
2024-03-04dm vdo block-map: Remove stray semicolonYang Li
Remove the unnecessary semicolon at the end of the for statement. Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2024-03-04dm vdo string-utils: change from uds_ to vdo_ namespaceMike Snitzer
Signed-off-by: Mike Snitzer <snitzer@kernel.org> Signed-off-by: Chung Chung <cchung@redhat.com> Signed-off-by: Matthew Sakai <msakai@redhat.com>
2024-03-04dm vdo logger: change from uds_ to vdo_ namespaceMike Snitzer
Rename all uds_log_* to vdo_log_*. Signed-off-by: Mike Snitzer <snitzer@kernel.org> Signed-off-by: Chung Chung <cchung@redhat.com> Signed-off-by: Matthew Sakai <msakai@redhat.com>
2024-03-04dm vdo funnel-queue: change from uds_ to vdo_ namespaceMike Snitzer
Also return VDO_SUCCESS from vdo_make_funnel_queue. Signed-off-by: Mike Snitzer <snitzer@kernel.org> Signed-off-by: Chung Chung <cchung@redhat.com> Signed-off-by: Matthew Sakai <msakai@redhat.com>
2024-03-04dm vdo indexer: fix use after freeMatthew Sakai
Fixes: b46d79bdb82a ("dm vdo: add deduplication index storage interface") Reported-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com> Signed-off-by: Matthew Sakai <msakai@redhat.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2024-03-04dm vdo logger: remove log level to string conversion codeMike Snitzer
Was only used by sysfs code, can be reinstated if/when needed. Signed-off-by: Mike Snitzer <snitzer@kernel.org> Signed-off-by: Ken Raeburn <raeburn@redhat.com> Signed-off-by: Matthew Sakai <msakai@redhat.com>
generated by cgit (git 2.34.1) at 2025-09-22 16:31:38 +0000