| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux
Pull pwm updates from Uwe Kleine-König:
"This contains the usual amount of driver and device tree changes.
Additionally there is a big rework of how pwm lowlevel drivers are
registered to prepare adding character device support.
Thanks to Dharma Balasubiramani, Dong Aisheng, Duje Mihanović, Jerome
Brunet, Raag Jadav and Rafał Miłecki for their contributions. And
sorry for those who still need some patience because I didn't manage
to empty my review queue"
* tag 'pwm/for-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux: (185 commits)
pwm: imx-tpm: fix probe crash due to access registers without clock
pwm: meson: generalize 4 inputs clock on meson8 pwm type
dt-bindings: pwm: amlogic: Add a new binding for meson8 pwm types
dt-bindings: pwm: amlogic: fix s4 bindings
pwm: dwc: simplify error handling
pwm: dwc: Add 16 channel support for Intel Elkhart Lake
pwm: dwc: drop redundant error check
staging: greybus: pwm: Make use of devm_pwmchip_alloc() function
staging: greybus: pwm: Rework how the number of PWM lines is determined
staging: greybus: pwm: Drop unused gb_connection_set_data()
staging: greybus: pwm: Rely on pwm framework to pass a valid hwpwm
staging: greybus: pwm: Make use of pwmchip_parent() accessor
staging: greybus: pwm: Change prototype of helpers to prepare further changes
leds: qcom-lpg: Make use of devm_pwmchip_alloc() function
drm/bridge: ti-sn65dsi86: Make use of devm_pwmchip_alloc() function
drm/bridge: ti-sn65dsi86: Make use of pwmchip_parent() accessor
gpio: mvebu: Make use of devm_pwmchip_alloc() function
pwm: xilinx: Make use of devm_pwmchip_alloc() function
pwm: xilinx: Prepare removing pwm_chip from driver data
pwm: vt8500: Make use of devm_pwmchip_alloc() function
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux
Pull chrome platform firmware updates from Tzung-Bi Shih:
- Allow userspace to automatically load coreboot modules by adding
modaliases and sending uevents
- Make bus_type const
* tag 'tag-chrome-platform-firmware-for-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux:
firmware: coreboot: Replace tag with id table in driver struct
firmware: coreboot: Generate aliases for coreboot modules
firmware: coreboot: Generate modalias uevent for devices
firmware: coreboot: make coreboot_bus_type const
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper VDO target from Mike Snitzer:
"Introduce the DM vdo target which provides block-level deduplication,
compression, and thin provisioning. Please see:
Documentation/admin-guide/device-mapper/vdo.rst
Documentation/admin-guide/device-mapper/vdo-design.rst
The DM vdo target handles its concurrency by pinning an IO, and
subsequent stages of handling that IO, to a particular VDO thread.
This aspect of VDO is "unique" but its overall implementation is very
tightly coupled to its mostly lockless threading model. As such, VDO
is not easily changed to use more traditional finer-grained locking
and Linux workqueues. Please see the "Zones and Threading" section of
vdo-design.rst
The DM vdo target has been used in production for many years but has
seen significant changes over the past ~6 years to prepare it for
upstream inclusion. The codebase is still large but it is isolated to
drivers/md/dm-vdo/ and has been made considerably more approachable
and maintainable.
Matt Sakai has been added to the MAINTAINERS file to reflect that he
will send VDO changes upstream through the DM subsystem maintainers"
* tag 'for-6.9/dm-vdo' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: (142 commits)
dm vdo: document minimum metadata size requirements
dm vdo: remove meaningless version number constant
dm vdo: remove vdo_perform_once
dm vdo block-map: Remove stray semicolon
dm vdo string-utils: change from uds_ to vdo_ namespace
dm vdo logger: change from uds_ to vdo_ namespace
dm vdo funnel-queue: change from uds_ to vdo_ namespace
dm vdo indexer: fix use after free
dm vdo logger: remove log level to string conversion code
dm vdo: document log_level parameter
dm vdo: add 'log_level' module parameter
dm vdo: remove all sysfs interfaces
dm vdo target: eliminate inappropriate uses of UDS_SUCCESS
dm vdo indexer: update ASSERT and ASSERT_LOG_ONLY usage
dm vdo encodings: update some stale comments
dm vdo permassert: audit all of ASSERT to test for VDO_SUCCESS
dm-vdo funnel-workqueue: return VDO_SUCCESS from make_simple_work_queue
dm vdo thread-utils: return VDO_SUCCESS on vdo_create_thread success
dm vdo int-map: return VDO_SUCCESS on success
dm vdo: check for VDO_SUCCESS return value from memory-alloc functions
...
|
|
When running as PVH or HVM Linux will use holes in the memory map as scratch
space to map grants, foreign domain pages and possibly miscellaneous other
stuff. However the usage of such memory map holes for Xen purposes can be
problematic. The request of holesby Xen happen quite early in the kernel boot
process (grant table setup already uses scratch map space), and it's possible
that by then not all devices have reclaimed their MMIO space. It's not
unlikely for chunks of Xen scratch map space to end up using PCI bridge MMIO
window memory, which (as expected) causes quite a lot of issues in the system.
At least for PVH dom0 we have the possibility of using regions marked as
UNUSABLE in the e820 memory map. Either if the region is UNUSABLE in the
native memory map, or it has been converted into UNUSABLE in order to hide RAM
regions from dom0, the second stage translation page-tables can populate those
areas without issues.
PV already has this kind of logic, where the balloon driver is inflated at
boot. Re-use the current logic in order to also inflate it when running as
PVH. onvert UNUSABLE regions up to the ratio specified in EXTRA_MEM_RATIO to
RAM, while reserving them using xen_add_extra_mem() (which is also moved so
it's no longer tied to CONFIG_PV).
[jgross: fixed build for CONFIG_PVH without CONFIG_XEN_PVH]
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20240220174341.56131-1-roger.pau@citrix.com
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper BH workqueue conversion from Mike Snitzer:
"Convert the DM verity and crypt targets from (ab)using tasklets to
using BH workqueues.
These changes were coordinated with Tejun and are based ontop of DM's
6.9 changes and Tejun's 6.9 workqueue tree"
* tag 'for-6.9/dm-bh-wq' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm-verity: Convert from tasklet to BH workqueue
dm-crypt: Convert from tasklet to BH workqueue
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper updates from Mike Snitzer:
- Fix DM core's IO submission (which include dm-io and dm-bufio) such
that a bio's IO priority is propagated. Work focused on enabling both
DM crypt and verity targets to retain the appropriate IO priority
- Fix DM raid reshape logic to not allow an empty flush bio to be
requeued due to false concern about the bio, which doesn't have a
data payload, accessing beyond the end of the device
- Fix DM core's internal resume so that it properly calls both presume
and resume methods, which fixes the potential for a postsuspend and
resume imbalance
- Update DM verity target to set DM_TARGET_SINGLETON flag because it
doesn't make sense to have a DM table with a mix of targets that
include dm-verity
- Small cleanups in DM crypt, thin, and integrity targets
- Fix references to dm-devel mailing list to use latest list address
* tag 'for-6.9/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm: call the resume method on internal suspend
dm raid: fix false positive for requeue needed during reshape
dm-integrity: set max_integrity_segments in dm_integrity_io_hints
dm: update relevant MODULE_AUTHOR entries to latest dm-devel mailing list
dm ioctl: update DM_DRIVER_EMAIL to new dm-devel mailing list
dm verity: set DM_TARGET_SINGLETON feature flag
dm crypt: Fix IO priority lost when queuing write bios
dm verity: Fix IO priority lost when reading FEC and hash
dm bufio: Support IO priority
dm io: Support IO priority
dm crypt: remove redundant state settings after waking up
dm thin: add braces around conditional code that spans lines
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux
Pull ata updates from Niklas Cassel:
- Do not enable LPM for external ports (hotplug-capable ports or eSATA
ports), as the HBA will not be able to detect hot plug removal events
when LPM is enabled (me)
- Drop the board type board_ahci_low_power. Now when we make sure that
we won't enable LPM for external ports, we can always set the LPM
policy to CONFIG_SATA_MOBILE_LPM_POLICY for internal ports. There is
thus no longer any need for the board type board_ahci_low_power, so
it can be removed. (As before, LPM features not supported by the HBA
and/or the device will not be enabled, regardless of the LPM policy
Kconfig) (Mario Limonciello)
Note that the default CONFIG_SATA_MOBILE_LPM_POLICY value is still 0
(which will not try to enable any LPM features), however, most Linux
distributions override this and set it to 3 (Medium power with DIPM).
We intend to change the default to 3 in the coming cycles, but we
will wait a cycle or two.
- Add board type board_ahci_pcs_quirk and make all legacy Intel
platforms use it. The Intel PCS quirk was being applied to basically
all Intel platforms, which caused some issues (the device failing to
come back after a reset), when being applied to newer Intel platforms
where it shouldn't have been applied.
New platforms can be added using board type board_ahci, which will
not have the quirk applied (me)
- Rename board_ahci_nosntf to board_ahci_pcs_quirk_no_sntf to more
clearly highlight that it applies two different quirks (me)
- Modify the ahci_broken_devslp() quirk to be implemented like all the
other quirks (i.e. define a board type for the quirk) (me)
- Drop unused board_ahci_noncq board type (me)
- Rename board_ahci_nomsi to board_ahci_no_msi to match the other board
types (me)
- Make pata_parport_bus_type const (Ricardo B. Marliere)
- Remove at91 compact flash device tree binding. (The binding is not
used by any driver.) (from Hari Prasath Gujulan Elango)
- Convert MediaTek device tree binding to json-schema (Rafał Miłecki)
- At boot, print the number of implemented ports, instead of printing
the maximum number of ports supported by the HBA silicon (me)
* tag 'ata-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
ahci: print the number of implemented ports
dt-bindings: ata: convert MediaTek controller to the json-schema
ahci: rename board_ahci_nomsi
ahci: drop unused board_ahci_noncq
ahci: clean up ahci_broken_devslp quirk
ahci: rename board_ahci_nosntf
ahci: clean up intel_pcs_quirk
ata: ahci: Drop low power policy board type
ata: ahci: do not enable LPM on external ports
ata: ahci: drop hpriv param from ahci_update_initial_lpm_policy()
ata: ahci: a hotplug capable port is an external port
ata: ahci: move marking of external port earlier
dt-bindings: ata: atmel: remove at91 compact flash documentation
ata: pata_parport: make pata_parport_bus_type const
|
|
A previous bugfix added a call to kcalloc(), which starting in gcc-14
causes a harmless warning about the argument order:
drivers/soc/fsl/dpio/dpio-service.c: In function 'dpaa2_io_service_enqueue_multiple_desc_fq':
drivers/soc/fsl/dpio/dpio-service.c:526:29: error: 'kcalloc' sizes specified with 'sizeof' in the earlier argument and not in the later argument [-Werror=calloc-transposed-args]
526 | ed = kcalloc(sizeof(struct qbman_eq_desc), 32, GFP_KERNEL);
| ^~~~~~
drivers/soc/fsl/dpio/dpio-service.c:526:29: note: earlier argument should specify number of elements, later size of each element
Since the two are only multiplied, the order does not change the
behavior, so just fix it now to shut up the compiler warning.
Dmity independently came up with the same fix.
Fixes: 5c4a5999b245 ("soc: fsl: dpio: avoid stack usage warning")
Reported-by: Dmitry Antipov <dmantipov@yandex.ru>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu updates from Joerg Roedel:
"Core changes:
- Constification of bus_type pointer
- Preparations for user-space page-fault delivery
- Use a named kmem_cache for IOVA magazines
Intel VT-d changes from Lu Baolu:
- Add RBTree to track iommu probed devices
- Add Intel IOMMU debugfs document
- Cleanup and refactoring
ARM-SMMU Updates from Will Deacon:
- Device-tree binding updates for a bunch of Qualcomm SoCs
- SMMUv2: Support for Qualcomm X1E80100 MDSS
- SMMUv3: Significant rework of the driver's STE manipulation and
domain handling code. This is the initial part of a larger scale
rework aiming to improve the driver's implementation of the
IOMMU-API in preparation for hooking up IOMMUFD support.
AMD-Vi Updates:
- Refactor GCR3 table support for SVA
- Cleanups
Some smaller cleanups and fixes"
* tag 'iommu-updates-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (88 commits)
iommu: Fix compilation without CONFIG_IOMMU_INTEL
iommu/amd: Fix sleeping in atomic context
iommu/dma: Document min_align_mask assumption
iommu/vt-d: Remove scalabe mode in domain_context_clear_one()
iommu/vt-d: Remove scalable mode context entry setup from attach_dev
iommu/vt-d: Setup scalable mode context entry in probe path
iommu/vt-d: Fix NULL domain on device release
iommu: Add static iommu_ops->release_domain
iommu/vt-d: Improve ITE fault handling if target device isn't present
iommu/vt-d: Don't issue ATS Invalidation request when device is disconnected
PCI: Make pci_dev_is_disconnected() helper public for other drivers
iommu/vt-d: Use device rbtree in iopf reporting path
iommu/vt-d: Use rbtree to track iommu probed devices
iommu/vt-d: Merge intel_svm_bind_mm() into its caller
iommu/vt-d: Remove initialization for dynamically heap-allocated rcu_head
iommu/vt-d: Remove treatment for revoking PASIDs with pending page faults
iommu/vt-d: Add the document for Intel IOMMU debugfs
iommu/vt-d: Use kcalloc() instead of kzalloc()
iommu/vt-d: Remove INTEL_IOMMU_BROKEN_GFX_WA
iommu: re-use local fwnode variable in iommu_ops_from_fwnode()
...
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20240307181135.191192-2-u.kleine-koenig@pengutronix.de
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
In the RISC-V specification, the stimecmp register doesn't have a default
value. To prevent the timer interrupt from being triggered during timer
initialization, clear the timer interrupt by writing stimecmp with a
maximum value.
Fixes: 9f7a8ff6391f ("RISC-V: Prefer sstc extension if available")
Cc: <stable@vger.kernel.org>
Signed-off-by: Ley Foon Tan <leyfoon.tan@starfivetech.com>
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
Tested-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20240306172330.255844-1-leyfoon.tan@starfivetech.com
|
|
Just use 0 and 1 directly, instead of the confusing local variable
that's always set to 0.
Cc: Inki Dae <inki.dae@samsung.com>
Cc: Seung-Woo Kim <sw0312.kim@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/64cc680f14d961cedb726a6fd5c6dfd53ca9bb85.1709913674.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
lt9611uxc_connector_get_modes() propagates the return value of
drm_edid_connector_add_modes() but stores the int temporarily in an
unsigned int. Use the correct type.
Cc: Andrzej Hajda <andrzej.hajda@intel.com>
Cc: Neil Armstrong <neil.armstrong@linaro.org>
Cc: Robert Foss <rfoss@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/ed97f4f036263cdc4f34330cef91214970f99a77.1709913674.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
The .get_modes() hooks aren't supposed to return negative error
codes. Return 0 for no modes, whatever the reason.
Cc: Maxime Ripard <mripard@kernel.org>
Cc: stable@vger.kernel.org
Acked-by: Maxime Ripard <mripard@kernel.org>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/dcda6d4003e2c6192987916b35c7304732800e08.1709913674.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
The .get_modes() hooks aren't supposed to return negative error
codes. Return 0 for no modes, whatever the reason.
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: stable@vger.kernel.org
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/311f6eec96d47949b16a670529f4d89fcd97aefa.1709913674.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
The .get_modes() hooks aren't supposed to return negative error
codes. Return 0 for no modes, whatever the reason.
Cc: Adrien Grassein <adrien.grassein@gmail.com>
Cc: stable@vger.kernel.org
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/dcdddcbcb64b6f6cdc55022ee50c10dee8ddbc3d.1709913674.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
The .get_modes() hooks aren't supposed to return negative error
codes. Return 0 for no modes, whatever the reason.
Cc: Inki Dae <inki.dae@samsung.com>
Cc: Seung-Woo Kim <sw0312.kim@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: stable@vger.kernel.org
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/d8665f620d9c252aa7d5a4811ff6b16e773903a2.1709913674.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
None of the callers of drm_panel_get_modes() expect it to return
negative error codes. Either they propagate the return value in their
struct drm_connector_helper_funcs .get_modes() hook (which is also not
supposed to return negative codes), or add it to other counts leading to
bogus values.
On the other hand, many of the struct drm_panel_funcs .get_modes() hooks
do return negative error codes, so handle them gracefully instead of
propagating further.
Return 0 for no modes, whatever the reason.
Cc: Neil Armstrong <neil.armstrong@linaro.org>
Cc: Jessica Zhang <quic_jesszhan@quicinc.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: stable@vger.kernel.org
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/79f559b72d8c493940417304e222a4b04dfa19c4.1709913674.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
The .get_modes() callback is supposed to return the number of modes,
never a negative error code. If a negative value is returned, it'll just
be interpreted as a negative count, and added to previous calculations.
Document the rules, but handle the negative values gracefully with an
error message.
Cc: stable@vger.kernel.org
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/50208c866facc33226a3c77b82bb96aeef8ef310.1709913674.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Since commit 43a7206b0963 ("driver core: class: make class_register() take
a const *"), the driver core allows for struct class to be in read-only
memory, so move the class3270 structure to be declared at build time
placing it into read-only memory, instead of having to be dynamically
allocated at boot time.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: "Ricardo B. Marliere" <ricardo@marliere.net>
Link: https://lore.kernel.org/r/20240305-class_cleanup-s390-v1-6-c4ff1ec49ffd@marliere.net
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Instead of checking if rc is 0, check whether it is non-zero and return
early if so. The call to class_create() can fail, so add a check to it and
move it out of the mutex region.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: "Ricardo B. Marliere" <ricardo@marliere.net>
Link: https://lore.kernel.org/r/20240305-class_cleanup-s390-v1-5-c4ff1ec49ffd@marliere.net
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Since commit 43a7206b0963 ("driver core: class: make class_register() take
a const *"), the driver core allows for struct class to be in read-only
memory, so move the tape_class structure to be declared at build time
placing it into read-only memory, instead of having to be dynamically
allocated at boot time.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: "Ricardo B. Marliere" <ricardo@marliere.net>
Link: https://lore.kernel.org/r/20240305-class_cleanup-s390-v1-4-c4ff1ec49ffd@marliere.net
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Since commit 43a7206b0963 ("driver core: class: make class_register() take
a const *"), the driver core allows for struct class to be in read-only
memory, so move the vmlogrdr_class structure to be declared at build time
placing it into read-only memory, instead of having to be dynamically
allocated at boot time.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: "Ricardo B. Marliere" <ricardo@marliere.net>
Link: https://lore.kernel.org/r/20240305-class_cleanup-s390-v1-3-c4ff1ec49ffd@marliere.net
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Since commit 43a7206b0963 ("driver core: class: make class_register() take
a const *"), the driver core allows for struct class to be in read-only
memory, so move the vmur_class structure to be declared at build time
placing it into read-only memory, instead of having to be dynamically
allocated at boot time.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: "Ricardo B. Marliere" <ricardo@marliere.net>
Link: https://lore.kernel.org/r/20240305-class_cleanup-s390-v1-2-c4ff1ec49ffd@marliere.net
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Since commit 43a7206b0963 ("driver core: class: make class_register() take
a const *"), the driver core allows for struct class to be in read-only
memory, so move the zcrypt_class structure to be declared at build time
placing it into read-only memory, instead of having to be dynamically
allocated at boot time.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: "Ricardo B. Marliere" <ricardo@marliere.net>
Acked-by: Harald Freudenberger <freude@linux.ibm.com>
Link: https://lore.kernel.org/r/20240305-class_cleanup-s390-v1-1-c4ff1ec49ffd@marliere.net
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Use virt_to_dma64() and friends to properly convert virtual to physical and
hysical to virtual addresses so that "make C=1" does not generate any
warnings anymore.
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Use virt_to_dma32() and friends to properly convert virtual to physical and
physical to virtual addresses so that "make C=1" does not generate any
warnings anymore.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Use virt_to_dma32() and friends to properly convert virtual to physical and
physical to virtual addresses so that "make C=1" does not generate any
warnings anymore.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Use virt_to_dma64() and friends to properly convert virtual to physical and
physical to virtual addresses so that "make C=1" does not generate any
warnings anymore.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Use virt_to_dma64() and friends to properly convert virtual to physical and
physical to virtual addresses so that "make C=1" does not generate any
warnings anymore.
Reviewed-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Fix virtual vs physical address confusion and use new dma types and helper
functions to allow for type checking. This does not fix a bug since virtual
and physical address spaces are currently the same.
Tested-by: Jan Höppner <hoeppner@linux.ibm.com>
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Use virt_to_dma32() and friends to properly convert virtual to physical and
physical to virtual addresses so that "make C=1" does not generate any
warnings anymore.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Use virt_to_dma32() and friends to properly convert virtual to physical and
physical to virtual addresses so that "make C=1" does not generate any
warnings anymore.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Use virt_to_dma32() and friends to properly convert virtual to physical and
physical to virtual addresses so that "make C=1" does not generate any
warnings anymore.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Use virt_to_dma64() and friends to properly convert virtual to physical and
physical to virtual addresses so that "make C=1" does not generate any
warnings anymore.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Use virt_to_dma32() and friends to properly convert virtual to physical and
physical to virtual addresses so that "make C=1" does not generate any
warnings anymore.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Fix virtual vs physical address confusion. This does not fix a bug since
virtual and physical address spaces are currently the same.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Use virt_to_dma32() and friends to properly convert virtual to physical and
physical to virtual addresses so that "make C=1" does not generate any
warnings anymore.
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Only the last 12 bits of virtual / physical addresses are used when masking
with IDA_BLOCK_SIZE - 1. Given that the bits are the same regardless of
virtual or physical address, remove the virtual to physical address
conversion.
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Instead of converting virtual to physical addresses with the virt_to_dma*()
functions, use dma addresses as provided by DMA API and only add offsets to
these addresses. This makes sure that address conversion is only done by
the DMA API.
Signed-off-by: Halil Pasic <pasic@linux.ibm.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Change and use ccw_device_dma_zalloc() so it returns a virtual address like
before, which can be used to access data. However also pass a new dma32_t
pointer type handle, which correlates to the returned virtual address.
This pointer is used to directly pass/set the DMA handle as returned by the
DMA API.
Signed-off-by: Halil Pasic <pasic@linux.ibm.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Fix virtual vs physical address confusion and use new dma types and helper
functions to allow for type checking. This does not fix a bug since virtual
and physical address spaces are currently the same.
Signed-off-by: Halil Pasic <pasic@linux.ibm.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Change types of I/O structure members which contain physical addresses to
dma32_t and dma64_t bitwise types.
This allows to make use of sparse (aka "make C=1") to find incorrect usage
of physical addresses.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Fix virtual vs physical address confusion. This does not fix a bug
since virtual and physical address spaces are currently the same.
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Fix virtual vs physical address confusion. This does not fix a bug
since virtual and physical address spaces are currently the same.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Fix virtual vs physical address confusion. This does not fix a bug
since virtual and physical address spaces are currently the same.
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Fix virtual vs physical address confusion. This does not fix a bug
since virtual and physical address spaces are currently the same.
dax_direct_access() should receive a virtual kernel address in kaddr.
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Tests with hot-plugging crytpo cards on KVM guests with debug
kernel build revealed an use after free for the load field of
the struct zcrypt_card. The reason was an incorrect reference
handling of the zcrypt card object which could lead to a free
of the zcrypt card object while it was still in use.
This is an example of the slab message:
kernel: 0x00000000885a7512-0x00000000885a7513 @offset=1298. First byte 0x68 instead of 0x6b
kernel: Allocated in zcrypt_card_alloc+0x36/0x70 [zcrypt] age=18046 cpu=3 pid=43
kernel: kmalloc_trace+0x3f2/0x470
kernel: zcrypt_card_alloc+0x36/0x70 [zcrypt]
kernel: zcrypt_cex4_card_probe+0x26/0x380 [zcrypt_cex4]
kernel: ap_device_probe+0x15c/0x290
kernel: really_probe+0xd2/0x468
kernel: driver_probe_device+0x40/0xf0
kernel: __device_attach_driver+0xc0/0x140
kernel: bus_for_each_drv+0x8c/0xd0
kernel: __device_attach+0x114/0x198
kernel: bus_probe_device+0xb4/0xc8
kernel: device_add+0x4d2/0x6e0
kernel: ap_scan_adapter+0x3d0/0x7c0
kernel: ap_scan_bus+0x5a/0x3b0
kernel: ap_scan_bus_wq_callback+0x40/0x60
kernel: process_one_work+0x26e/0x620
kernel: worker_thread+0x21c/0x440
kernel: Freed in zcrypt_card_put+0x54/0x80 [zcrypt] age=9024 cpu=3 pid=43
kernel: kfree+0x37e/0x418
kernel: zcrypt_card_put+0x54/0x80 [zcrypt]
kernel: ap_device_remove+0x4c/0xe0
kernel: device_release_driver_internal+0x1c4/0x270
kernel: bus_remove_device+0x100/0x188
kernel: device_del+0x164/0x3c0
kernel: device_unregister+0x30/0x90
kernel: ap_scan_adapter+0xc8/0x7c0
kernel: ap_scan_bus+0x5a/0x3b0
kernel: ap_scan_bus_wq_callback+0x40/0x60
kernel: process_one_work+0x26e/0x620
kernel: worker_thread+0x21c/0x440
kernel: kthread+0x150/0x168
kernel: __ret_from_fork+0x3c/0x58
kernel: ret_from_fork+0xa/0x30
kernel: Slab 0x00000372022169c0 objects=20 used=18 fp=0x00000000885a7c88 flags=0x3ffff00000000a00(workingset|slab|node=0|zone=1|lastcpupid=0x1ffff)
kernel: Object 0x00000000885a74b8 @offset=1208 fp=0x00000000885a7c88
kernel: Redzone 00000000885a74b0: bb bb bb bb bb bb bb bb ........
kernel: Object 00000000885a74b8: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk
kernel: Object 00000000885a74c8: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk
kernel: Object 00000000885a74d8: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk
kernel: Object 00000000885a74e8: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk
kernel: Object 00000000885a74f8: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk
kernel: Object 00000000885a7508: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 68 4b 6b 6b 6b a5 kkkkkkkkkkhKkkk.
kernel: Redzone 00000000885a7518: bb bb bb bb bb bb bb bb ........
kernel: Padding 00000000885a756c: 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a ZZZZZZZZZZZZ
kernel: CPU: 0 PID: 387 Comm: systemd-udevd Not tainted 6.8.0-HF #2
kernel: Hardware name: IBM 3931 A01 704 (KVM/Linux)
kernel: Call Trace:
kernel: [<00000000ca5ab5b8>] dump_stack_lvl+0x90/0x120
kernel: [<00000000c99d78bc>] check_bytes_and_report+0x114/0x140
kernel: [<00000000c99d53cc>] check_object+0x334/0x3f8
kernel: [<00000000c99d820c>] alloc_debug_processing+0xc4/0x1f8
kernel: [<00000000c99d852e>] get_partial_node.part.0+0x1ee/0x3e0
kernel: [<00000000c99d94ec>] ___slab_alloc+0xaf4/0x13c8
kernel: [<00000000c99d9e38>] __slab_alloc.constprop.0+0x78/0xb8
kernel: [<00000000c99dc8dc>] __kmalloc+0x434/0x590
kernel: [<00000000c9b4c0ce>] ext4_htree_store_dirent+0x4e/0x1c0
kernel: [<00000000c9b908a2>] htree_dirblock_to_tree+0x17a/0x3f0
kernel: [<00000000c9b919dc>] ext4_htree_fill_tree+0x134/0x400
kernel: [<00000000c9b4b3d0>] ext4_dx_readdir+0x160/0x2f0
kernel: [<00000000c9b4bedc>] ext4_readdir+0x5f4/0x760
kernel: [<00000000c9a7efc4>] iterate_dir+0xb4/0x280
kernel: [<00000000c9a7f1ea>] __do_sys_getdents64+0x5a/0x120
kernel: [<00000000ca5d6946>] __do_syscall+0x256/0x310
kernel: [<00000000ca5eea10>] system_call+0x70/0x98
kernel: INFO: lockdep is turned off.
kernel: FIX kmalloc-96: Restoring Poison 0x00000000885a7512-0x00000000885a7513=0x6b
kernel: FIX kmalloc-96: Marking all objects used
The fix is simple: Before use of the queue not only the queue object
but also the card object needs to increase it's reference count
with a call to zcrypt_card_get(). Similar after use of the queue
not only the queue but also the card object's reference count is
decreased with zcrypt_card_put().
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Cc: stable@vger.kernel.org
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Use wake_up API instead of wake_up_interruptible, since
wait_event_timeout API is used for waiting on command completion.
Fixes: 1463f382f58d ("octeontx2-af: Add support for CGX link management")
Signed-off-by: Linu Cherian <lcherian@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
smp_call_function always runs its callback in hard IRQ context, even on
PREEMPT_RT, where spinlocks can sleep. So we need to use a raw spinlock
for cgr_lock to ensure we aren't waiting on a sleeping task.
Although this bug has existed for a while, it was not apparent until
commit ef2a8d5478b9 ("net: dpaa: Adjust queue depth on rate change")
which invokes smp_call_function_single via qman_update_cgr_safe every
time a link goes up or down.
Fixes: 96f413f47677 ("soc/fsl/qbman: fix issue in qman_delete_cgr_safe()")
CC: stable@vger.kernel.org
Reported-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Closes: https://lore.kernel.org/all/20230323153935.nofnjucqjqnz34ej@skbuf/
Reported-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Closes: https://lore.kernel.org/linux-arm-kernel/87wmsyvclu.fsf@pengutronix.de/
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Reviewed-by: Camelia Groza <camelia.groza@nxp.com>
Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
