| Age | Commit message (Collapse) | Author |
|---|
|
- Collect interrupt-related code in irq.c (Ilpo Järvinen)
- Mark 3ware-9650SE Root Port Extended Tags as broken (Jörg Wedekind)
* pci/enumeration:
PCI: Mark 3ware-9650SE Root Port Extended Tags as broken
PCI: Place interrupt related code into irq.c
# Conflicts:
# drivers/pci/Makefile
|
|
- After a DPC event, print all logged TLP Prefixes instead of printing the
first prefix several times (Ilpo Järvinen)
- Ignore the expected Surprise Down error that may cause a DPC event when
hot-removing a device (Smita Koralahalli)
- Add an RP PIO log size quirk for Intel Raptor Lake Root Ports, which
still don't advertise the correct log size, which prevented logging of RP
PIO Log registers when DPC is triggered (Paul Menzel)
* pci/dpc:
PCI/DPC: Quirk PIO log size for Intel Raptor Lake Root Ports
PCI/DPC: Ignore Surprise Down error on hot removal
PCI/DPC: Print all TLP Prefixes, not just the first
|
|
- Unmap MMIO mappings in pci_iounmap() to avoid a leak when
ARCH_HAS_GENERIC_IOPORT_MAP is defined (Philipp Stanner)
- Move pci_iomap.c to drivers/pci/ since it's all PCI-related (Philipp
Stanner)
- Move other PCI-related devres code from lib/devres.c to drivers/pci/
(Philipp Stanner)
- Move other devres code from pci.c to devres.c (Philipp Stanner)
* pci/devres:
PCI: Move devres code from pci.c to devres.c
PCI: Move PCI-specific devres code to drivers/pci/
PCI: Move pci_iomap.c to drivers/pci/
pci_iounmap(): Fix MMIO mapping leak
|
|
- Collect ASPM-related code into aspm.c (David E. Box)
- Save and restore ASPM L1 PM Substates configuration so these states
continue working after suspend/resume (David E. Box)
- Move the ASPM L1.2-related LTR save/restore next to the ASPM save/restore
(David E. Box)
- Move the required L1 disable before L1 Substate configuration into
pci_restore_aspm_l1ss_state() (Bjorn Helgaas)
- Update save_save when ASPM config is changed, so a .slot_reset() during
error recovery restores the changed config, not the .probe()-time config
(Vidya Sagar)
* pci/aspm:
PCI/ASPM: Update save_state when configuration changes
PCI/ASPM: Disable L1 before configuring L1 Substates
PCI/ASPM: Call pci_save_ltr_state() from pci_save_pcie_state()
PCI/ASPM: Save L1 PM Substates Capability for suspend/resume
PCI/ASPM: Move pci_save_ltr_state() to aspm.c
PCI/ASPM: Always build aspm.c
PCI/ASPM: Move pci_configure_ltr() to aspm.c
|
|
Many PCIe device drivers save the configuration state of their device
during probe and restore it when their .slot_reset() hook is called during
PCIe error recovery.
If the ASPM configuration is changed after the driver's probe is called and
before an error event occurs, .slot_reset() restores the ASPM configuration
to what it was at the time of probe, not to what it was just before the
occurrence of the error event. This leads to a mismatch in ASPM
configuration between the device and its upstream device.
Update the saved configuration of the device when the ASPM configuration
changes.
Link: https://lore.kernel.org/r/20240222174436.3565146-1-vidyas@nvidia.com
Signed-off-by: Vidya Sagar <vidyas@nvidia.com>
[bhelgaas: commit log, rebase to pci/aspm, rename to
pci_update_aspm_saved_state() since it updates only LNKCTL, update only
ASPMC and CLKREQ_EN in LNKCTL]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Reviewed-by: David E. Box <david.e.box@linux.intel.com>
|
|
Per PCIe r6.1, sec 5.5.4, L1 must be disabled while setting ASPM L1 PM
Substates enable bits. Previously this was enforced by clearing
PCI_EXP_LNKCTL_ASPMC before calling pci_restore_aspm_l1ss_state().
Move the L1 (and L0s, although that doesn't seem required) disable into
pci_restore_aspm_l1ss_state() itself so it's closer to the code that
depends on it.
Link: https://lore.kernel.org/r/20240223213733.GA115410@bhelgaas
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
ASPM state is saved and restored from pci_save/restore_pcie_state(). Since
the LTR Capability is linked with ASPM, move the LTR save and restore calls
there as well. No functional change intended.
Suggested-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://lore.kernel.org/r/20240128233212.1139663-6-david.e.box@linux.intel.com
Link: https://lore.kernel.org/r/20240223205851.114931-6-helgaas@kernel.org
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 boot updates from Ingo Molnar:
- Continuing work by Ard Biesheuvel to improve the x86 early startup
code, with the long-term goal to make it position independent:
- Get rid of early accesses to global objects, either by moving
them to the stack, deferring the access until later, or dropping
the globals entirely
- Move all code that runs early via the 1:1 mapping into
.head.text, and move code that does not out of it, so that build
time checks can be added later to ensure that no inadvertent
absolute references were emitted into code that does not
tolerate them
- Remove fixup_pointer() and occurrences of __pa_symbol(), which
rely on the compiler emitting absolute references, which is not
guaranteed
- Improve the early console code
- Add early console message about ignored NMIs, so that users are at
least warned about their existence - even if we cannot do anything
about them
- Improve the kexec code's kernel load address handling
- Enable more X86S (simplified x86) bits
- Simplify early boot GDT handling
- Micro-optimize the boot code a bit
- Misc cleanups
* tag 'x86-boot-2024-03-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (22 commits)
x86/sev: Move early startup code into .head.text section
x86/sme: Move early SME kernel encryption handling into .head.text
x86/boot: Move mem_encrypt= parsing to the decompressor
efi/libstub: Add generic support for parsing mem_encrypt=
x86/startup_64: Simplify virtual switch on primary boot
x86/startup_64: Simplify calculation of initial page table address
x86/startup_64: Defer assignment of 5-level paging global variables
x86/startup_64: Simplify CR4 handling in startup code
x86/boot: Use 32-bit XOR to clear registers
efi/x86: Set the PE/COFF header's NX compat flag unconditionally
x86/boot/64: Load the final kernel GDT during early boot directly, remove startup_gdt[]
x86/boot/64: Use RIP_REL_REF() to access early_top_pgt[]
x86/boot/64: Use RIP_REL_REF() to access early page tables
x86/boot/64: Use RIP_REL_REF() to access '__supported_pte_mask'
x86/boot/64: Use RIP_REL_REF() to access early_dynamic_pgts[]
x86/boot/64: Use RIP_REL_REF() to assign 'phys_base'
x86/boot/64: Simplify global variable accesses in GDT/IDT programming
x86/trampoline: Bypass compat mode in trampoline_start64() if not needed
kexec: Allocate kernel above bzImage's pref_address
x86/boot: Add a message about ignored early NMIs
...
|
|
4ff116d0d5fd ("PCI/ASPM: Save L1 PM Substates Capability for
suspend/resume") restored the L1 PM Substates Capability after resume,
which reduced power consumption by making the ASPM L1.x states work after
resume.
a7152be79b62 ("Revert "PCI/ASPM: Save L1 PM Substates Capability for
suspend/resume"") reverted 4ff116d0d5fd because resume failed on some
systems, so power consumption after resume increased again.
a7152be79b62 mentioned that we restore L1 PM substate configuration even
though ASPM L1 may already be enabled. This is due the fact that the
pci_restore_aspm_l1ss_state() was called before pci_restore_pcie_state().
Save and restore the L1 PM Substates Capability, following PCIe r6.1, sec
5.5.4 more closely by:
1) Do not restore ASPM configuration in pci_restore_pcie_state() but
do that after PCIe capability is restored in pci_restore_aspm_state()
following PCIe r6.1, sec 5.5.4.
2) If BIOS reenables L1SS, particularly L1.2, we need to clear the
enables in the right order, downstream before upstream. Defer
restoring the L1SS config until we are at the downstream component.
Then update the config for both ends of the link in the prescribed
order.
3) Program ASPM L1 PM substate configuration before L1 enables.
4) Program ASPM L1 PM substate enables last, after rest of the fields
in the capability are programmed.
[bhelgaas: commit log, squash L1SS-related patches, do both LNKCTL restores
in pci_restore_pcie_state()]
Link: https://lore.kernel.org/r/20240128233212.1139663-3-david.e.box@linux.intel.com
Link: https://lore.kernel.org/r/20240128233212.1139663-4-david.e.box@linux.intel.com
Link: https://lore.kernel.org/r/20240223205851.114931-5-helgaas@kernel.org
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217321
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216782
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216877
Co-developed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Co-developed-by: David E. Box <david.e.box@linux.intel.com>
Reported-by: Koba Ko <koba.ko@canonical.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Tasev Nikola <tasev.stefanoska@skynet.be> # Asus UX305FA
Cc: Mark Enriquez <enriquezmark36@gmail.com>
Cc: Thomas Witt <kernel@witt.link>
Cc: Werner Sembach <wse@tuxedocomputers.com>
Cc: Vidya Sagar <vidyas@nvidia.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 RFDS mitigation from Dave Hansen:
"RFDS is a CPU vulnerability that may allow a malicious userspace to
infer stale register values from kernel space. Kernel registers can
have all kinds of secrets in them so the mitigation is basically to
wait until the kernel is about to return to userspace and has user
values in the registers. At that point there is little chance of
kernel secrets ending up in the registers and the microarchitectural
state can be cleared.
This leverages some recent robustness fixes for the existing MDS
vulnerability. Both MDS and RFDS use the VERW instruction for
mitigation"
* tag 'rfds-for-linus-2024-03-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
KVM/x86: Export RFDS_NO and RFDS_CLEAR to guests
x86/rfds: Mitigate Register File Data Sampling (RFDS)
Documentation/hw-vuln: Add documentation for RFDS
x86/mmio: Disable KVM mitigation when X86_FEATURE_CLEAR_CPU_BUF is set
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Miguel Ojeda <ojeda@kernel.org>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
The split of /reserved-memory handling between fdt.c and
of_reserved_mem.c makes for reading and restructuring the code
difficult. As of_reserved_mem.c is only built for
CONFIG_OF_EARLY_FLATTREE already, move all the code to one spot.
Acked-by: Saravana Kannan <saravanak@google.com>
Reviewed-by: Oreoluwa Babatunde <quic_obabatun@quicinc.com>
Link: https://lore.kernel.org/r/20240311181303.1516514-2-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Assign riscv_pmu_irq_num the value of (256 + 18) for the custome PMU
and add SSCOUNTOVF and SIP alternatives to ALT_SBI_PMU_OVERFLOW()
and ALT_SBI_PMU_OVF_CLEAR_PENDING() macros, respectively.
To make use of Andes PMU extension, "xandespmu" needs to be appended
to the riscv,isa-extensions for each cpu node in device-tree, and
make sure CONFIG_ANDES_CUSTOM_PMU is enabled.
Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Charles Ci-Jyun Wu <dminus@andestech.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Co-developed-by: Locus Wei-Han Chen <locus84@andestech.com>
Signed-off-by: Locus Wei-Han Chen <locus84@andestech.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20240222083946.3977135-8-peterlin@andestech.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
The interrupt enable/disable operations are already performed by the
IRQ chip functions riscv_intc_irq_unmask()/riscv_intc_irq_mask() during
enable_percpu_irq()/disable_percpu_irq(). It can be done only once.
Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20240222083946.3977135-7-peterlin@andestech.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tip/tip into for-next
INTC changes to consume for RISCV
* tag 'irq-for-riscv-02-23-24' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/riscv-intc: Introduce Andes hart-level interrupt controller
irqchip/riscv-intc: Allow large non-standard interrupt number
|
|
SPI controller with integrated chip select handling still need to adhere
to SPI device's CS setup, hold and inactive delays. For controller
without set_cs_timing spi core shall handle the delays to avoid
duplicated delay handling in each controller driver.
Fixes a regression for the out of tree SPI controller and SPI HID
transport on Apple M1/M1 Pro/Max notebooks.
Fixes: 4d8ff6b0991d ("spi: Add multi-cs memories support in SPI core")
Signed-off-by: Janne Grunau <j@jannau.net>
Link: https://msgid.link/r/20240311-spi-cs-delays-regression-v1-1-0075020a90b2@jannau.net
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
fsl_lpspi_probe() is allocating/disposing memory manually with
spi_alloc_host()/spi_alloc_target(), but uses
devm_spi_register_controller(). In case of error after the latter call the
memory will be explicitly freed in the probe function by
spi_controller_put() call, but used afterwards by "devm" management outside
probe() (spi_unregister_controller() <- devm_spi_unregister() below).
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000070
...
Call trace:
kernfs_find_ns
kernfs_find_and_get_ns
sysfs_remove_group
sysfs_remove_groups
device_remove_attrs
device_del
spi_unregister_controller
devm_spi_unregister
release_nodes
devres_release_all
really_probe
driver_probe_device
__device_attach_driver
bus_for_each_drv
__device_attach
device_initial_probe
bus_probe_device
deferred_probe_work_func
process_one_work
worker_thread
kthread
ret_from_fork
Fixes: 5314987de5e5 ("spi: imx: add lpspi bus driver")
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@siemens.com>
Link: https://msgid.link/r/20240312112050.2503643-1-alexander.sverdlin@siemens.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Previously, performing an exclusive get on an already-enabled regulator
resulted in inconsistent state initialization between child and parent
regulators. While the child's counts were updated, its parent's counters
remained unaffected.
Consequently, attempting to disable an already-enabled exclusive regulator
triggered unbalanced disables warnings from its parent regulator.
This commit addresses the issue by propagating the enable state to the
parent regulator using a regulator_enable call. This ensures consistent
state management across the regulator hierarchy, preventing warnings!
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://msgid.link/r/20240312091638.1266167-1-kory.maincent@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
There is this reported crash when experimenting with the lvm2 testsuite.
The list corruption is caused by the fact that the postsuspend and resume
methods were not paired correctly; there were two consecutive calls to the
origin_postsuspend function. The second call attempts to remove the
"hash_list" entry from a list, while it was already removed by the first
call.
Fix __dm_internal_resume so that it calls the preresume and resume
methods of the table's targets.
If a preresume method of some target fails, we are in a tricky situation.
We can't return an error because dm_internal_resume isn't supposed to
return errors. We can't return success, because then the "resume" and
"postsuspend" methods would not be paired correctly. So, we set the
DMF_SUSPENDED flag and we fake normal suspend - it may confuse userspace
tools, but it won't cause a kernel crash.
------------[ cut here ]------------
kernel BUG at lib/list_debug.c:56!
invalid opcode: 0000 [#1] PREEMPT SMP
CPU: 1 PID: 8343 Comm: dmsetup Not tainted 6.8.0-rc6 #4
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-2 04/01/2014
RIP: 0010:__list_del_entry_valid_or_report+0x77/0xc0
<snip>
RSP: 0018:ffff8881b831bcc0 EFLAGS: 00010282
RAX: 000000000000004e RBX: ffff888143b6eb80 RCX: 0000000000000000
RDX: 0000000000000001 RSI: ffffffff819053d0 RDI: 00000000ffffffff
RBP: ffff8881b83a3400 R08: 00000000fffeffff R09: 0000000000000058
R10: 0000000000000000 R11: ffffffff81a24080 R12: 0000000000000001
R13: ffff88814538e000 R14: ffff888143bc6dc0 R15: ffffffffa02e4bb0
FS: 00000000f7c0f780(0000) GS:ffff8893f0a40000(0000) knlGS:0000000000000000
CS: 0010 DS: 002b ES: 002b CR0: 0000000080050033
CR2: 0000000057fb5000 CR3: 0000000143474000 CR4: 00000000000006b0
Call Trace:
<TASK>
? die+0x2d/0x80
? do_trap+0xeb/0xf0
? __list_del_entry_valid_or_report+0x77/0xc0
? do_error_trap+0x60/0x80
? __list_del_entry_valid_or_report+0x77/0xc0
? exc_invalid_op+0x49/0x60
? __list_del_entry_valid_or_report+0x77/0xc0
? asm_exc_invalid_op+0x16/0x20
? table_deps+0x1b0/0x1b0 [dm_mod]
? __list_del_entry_valid_or_report+0x77/0xc0
origin_postsuspend+0x1a/0x50 [dm_snapshot]
dm_table_postsuspend_targets+0x34/0x50 [dm_mod]
dm_suspend+0xd8/0xf0 [dm_mod]
dev_suspend+0x1f2/0x2f0 [dm_mod]
? table_deps+0x1b0/0x1b0 [dm_mod]
ctl_ioctl+0x300/0x5f0 [dm_mod]
dm_compat_ctl_ioctl+0x7/0x10 [dm_mod]
__x64_compat_sys_ioctl+0x104/0x170
do_syscall_64+0x184/0x1b0
entry_SYSCALL_64_after_hwframe+0x46/0x4e
RIP: 0033:0xf7e6aead
<snip>
---[ end trace 0000000000000000 ]---
Fixes: ffcc39364160 ("dm: enhance internal suspend and resume interface")
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
|
An empty flush doesn't have a payload, so it should never be looked at
when considering to possibly requeue a bio for the case when a reshape
is in progress.
Fixes: 9dbd1aa3a81c ("dm raid: add reshaping support to the target")
Reported-by: Patrick Plenefisch <simonpatp@gmail.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
|
When `CONFIG_DEBUG_FS` is disabled, nmk_gpio_dbg_show_one() is an
empty dummy function; this however triggers a `-Wmissing-prototypes`
warning and later a linker error because the function is also used by
drivers/pinctrl/nomadik/pinctrl-nomadik.c, therefore it needs to be
non-static.
To allow both sources to access this dummy function, this patch moves
it to the header, adding the `#ifdef CONFIG_DEBUG_FS` there as well.
Signed-off-by: Max Kellermann <max.kellermann@ionos.com>
Link: https://lore.kernel.org/r/20240311133223.3429428-1-max.kellermann@ionos.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Using BUG_ON() is discouraged and also the check wasn't done early
enough to prevent an out of bounds access. Check earlier and return
an error instead of calling BUG().
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/ae643df0-3a3e-4270-8dbf-be390ee4b478@moroto.mountain
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
The current code only prints PKGC-10 residency when the PKGC-10
is not reached in previous 'freeze' attempt. To debug PKGC-10 issues, we
also need to know other PKGC residency counters to better triage issues.
Ex:
1. When system is stuck in PC2, it can be caused short LTR from device.
2. When system is stuck in PC8, it can be caused by display engine.
To better triage issues, all PKGC residency are needed when issues happen.
Example log:
CPU did not enter Package C10!!! (Package C10 cnt=0x0)
Prev Package C2 cnt = 0x2191a325de, Current Package C2 cnt = 0x21aba30724
Prev Package C3 cnt = 0x0, Current Package C3 cnt = 0x0
Prev Package C6 cnt = 0x0, Current Package C6 cnt = 0x0
Prev Package C7 cnt = 0x0, Current Package C7 cnt = 0x0
Prev Package C8 cnt = 0x0, Current Package C8 cnt = 0x0
Prev Package C9 cnt = 0x0, Current Package C9 cnt = 0x0
Prev Package C10 cnt = 0x0, Current Package C10 cnt = 0x0
With this log, we can know whether it's a stuck PC2 issue, and we can
check whether the short LTR from device causes the issue.
Signed-off-by: Kane Chen <kane.chen@intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20240308033127.1013053-1-kane.chen@intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
AAEON PICO-TGU4 board doesn't have any LED but there are bogus LED
controls under /sys/class/leds:
$ ls /sys/class/leds
asus::kbd_backlight asus::lightbar platform::micmute
The reason is that the ~0 read from asus_wmi_get_devstate() is treated
as a valid state, in truth it means the device is absent.
So filter out ~0 read to prevent bogus LED controls being created.
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20240308053255.224496-1-kai.heng.feng@canonical.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Merge tag 'platform-drivers-x86-v6.8-4' fixes into pdx86/for-next to
resolve amd/pmf conflicts.
|
|
Sort #include statements in i2c-nomadik driver.
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
Add compatible for the integration of the same DB8500 IP block into the
Mobileye EyeQ5 platform. Two quirks are present:
- The memory bus only supports 32-bit accesses. Avoid writeb() and
readb() by introducing helper functions that fallback to writel()
and readl().
- A register must be configured for the I2C speed mode; it is located
in a shared register region called OLB. We access that memory region
using a syscon & regmap that gets passed as a phandle (mobileye,olb).
A two-bit enum per controller is written into the register; that
requires us to know the global index of the I2C controller (cell arg
to the mobileye,olb phandle).
We add #include <linux/mfd/syscon.h> and <linux/regmap.h>.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
Allow overriding the default timeout value (200ms) from devicetree,
using the generic i2c-transfer-timeout-us property.
The i2c_adapter->timeout field is an unaccurate jiffies amount;
i2c-nomadik uses hrtimers for timeouts below one jiffy.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
The FIFO flush function uses a jiffies amount to detect timeouts as the
flushing is async. Replace with ktime to get more accurate precision
and support short timeouts.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
Replace the completion by a waitqueue for synchronization from IRQ
handler to task. For short timeouts, use hrtimers, else use timers.
Usecase: avoid blocking the I2C bus for too long when an issue occurs.
The threshold picked is one jiffy: if timeout is below that, use
hrtimers. This threshold is NOT configurable.
Implement behavior but do NOT change fetching of timeout. This means the
timeout is unchanged (200ms) and the hrtimer case will never trigger.
A waitqueue is used because it supports both desired timeout approaches.
See wait_event_timeout() and wait_event_hrtimeout(). An atomic boolean
serves as synchronization condition.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
Constant register bit fields are declared using hardcoded hex values;
replace them by calls to BIT() and GENMASK(). Replace custom GEN_MASK()
macro by the generic FIELD_PREP(). Replace manual bit manipulations by
the generic FIELD_GET() macro.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
IRQ_MASK and I2C_CLEAR_ALL_INTS both mask available interrupts. IRQ_MASK
removes top options (bits 29-31). I2C_CLEAR_ALL_INTS removes reserved
options including top bits. Keep the latter.
31 29 27 25 23 21 19 17 15 13 11 09 07 05 03 01
30 28 26 24 22 20 18 16 14 12 10 08 06 04 02 00
-- IRQ_MASK: ---------------------------------------------------
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
0 0 0
-- I2C_CLEAR_ALL_INTS: -----------------------------------------
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Notice I2C_CLEAR_ALL_INTS is more restrictive than IRQ_MASK.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
Pointer item is checked fo NULL at mlxreg_hotplug_work_helper() and then
it is dereferenced to produce dev_err().
This pointer is also dereferenced before calling this function and should
never be NULL except some piece of hardware is broken as it is said in
the comment before the check. So, this check can be safely removed.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: c6acad68eb2d ("platform/mellanox: mlxreg-hotplug: Modify to use a regmap interface")
Signed-off-by: Daniil Dulov <d.dulov@aladdin.ru>
Reviewed-by: Vadim Pasternak <vadimp@nvidia.com>
Link: https://lore.kernel.org/r/20240306153804.6509-1-d.dulov@aladdin.ru
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
platform-profiles
Update power thermals according to the platform-profiles selected by the
user.
Co-developed-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Signed-off-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20240306114415.3267603-8-Shyam-sundar.S-k@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
During the driver probe, the default cache values for the static slider
would be obtained by evaluating the APTS method. Add support to use
these values as the thermal settings to be updated on the system based
on the changing platform-profiles.
Co-developed-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Signed-off-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20240306114415.3267603-7-Shyam-sundar.S-k@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
APMF spec has a newer section called the APTS (AMD Performance and
Thermal State) information, where each slider/power mode is associated
with an index number.
Add support to get these indices for the Static Slider.
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Co-developed-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Signed-off-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20240306114415.3267603-6-Shyam-sundar.S-k@amd.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Add support for newer revision of the heart beat notify events.
This event is used to notify to the OEM BIOS on driver
load/unload/suspend/resume scenarios.
If OEM BIOS does not receive the heart beat event from PMF driver, OEM
BIOS shall conclude that PMF driver is no more active and BIOS will
update to the legacy system power thermals.
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Co-developed-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Signed-off-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20240306114415.3267603-5-Shyam-sundar.S-k@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Update the APMF function index 2 for family 1Ah, that gets the
information of SBIOS requests (like the pending requests from BIOS,
custom notifications, updation of power limits etc).
Co-developed-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Signed-off-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20240306114415.3267603-4-Shyam-sundar.S-k@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
The GET interface to receive the active power thermal information from
the PMFW has been deprecated. Hence drop the debugfs support from
version2 onwards.
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Co-developed-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Signed-off-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20240306114415.3267603-3-Shyam-sundar.S-k@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
For family 1AH, certain PMF features have been enhanced - leading to a
newer APMF (AMD PMF) spec (BIOS and PMF driver interface) called v2.
This information would be fed into the if_version field of the
verify_interface method of the APMF call from the BIOS.
Use this information to store the version number to differentiate
between v1 or v2 and also store the information into the PMF private
data structure, as this information would be required for further code
branching to support the latest silicon.
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Co-developed-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Signed-off-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20240306114415.3267603-2-Shyam-sundar.S-k@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Extend the s2idle check with checking that none of the PMC clocks
is in the forced-on state. If one of the clocks is in forced on
state then S0i3 cannot be reached.
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240305105915.76242-5-hdegoede@redhat.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
For the Bay Trail or Cherry Trail SoC to enter the S0i3 power-level
at s2idle suspend requires most of the hw-blocks / devices in the SoC
to be in D3 when entering s2idle suspend.
If some devices are not in D3 then the SoC will stay in a higher
power state, consuming much more power from the battery then in S0i3.
Use the new acpi_s2idle_dev_ops and acpi_register_lps0_dev()
functionality to register a new s2idle check function which checks that
all hardware blocks in the South complex (controlled by the PMC)
are in a state that allows the SoC to enter S0i3 and prints an error
message for any device in D0.
Some blocks are not used on lower-featured versions of the SoC and
these blocks will always report being in D0 on SoCs were they are
not used. A false-positive mask is used to identify these blocks
and for blocks in this mask the error is turned into a debug message
to avoid false-positive error messages.
Note the pmc_atom code is enabled by CONFIG_X86_INTEL_LPSS which
already depends on ACPI.
Signed-off-by: Johannes Stezenbach <js@sig21.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
[hdegoede: Use acpi_s2idle_dev_ops, ignore fused off blocks, PMIC I2C]
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240305105915.76242-4-hdegoede@redhat.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
include/linux/platform_data/x86/pmc_atom.h
Move the register defines for the Atom (Bay Trail, Cherry Trail) PMC
clocks to include/linux/platform_data/x86/pmc_atom.h.
This is a preparation patch to extend the S0i3 readiness checks
in drivers/platform/x86/pmc_atom.c with checking that the PMC
clocks are off on suspend entry.
Note these are added to include/linux/platform_data/x86/pmc_atom.h rather
then to include/linux/platform_data/x86/clk-pmc-atom.h because the former
already has all the other Atom PMC register defines.
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240305105915.76242-2-hdegoede@redhat.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Since commit 43a7206b0963 ("driver core: class: make class_register() take
a const *"), the driver core allows for struct class to be in read-only
memory, so move the fw_attr_class structure to be declared at build time
placing it into read-only memory, instead of having to be dynamically
allocated at boot time.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: "Ricardo B. Marliere" <ricardo@marliere.net>
Link: https://lore.kernel.org/r/20240305-class_cleanup-platform-v1-1-9085c97b9355@marliere.net
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
The vsec offset can be 64 bit long depending on the PFS start. So change
type to u64. Also use 64 bit formatting for seq_printf.
Fixes: 47731fd2865f ("platform/x86/intel: Intel TPMI enumeration driver")
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: stable@vger.kernel.org # v6.3+
Link: https://lore.kernel.org/r/20240305194644.2077867-1-srinivas.pandruvada@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
intel-mid.h is providing some core parts of the South Complex PM,
which are usually not used by individual drivers. In particular,
this driver doesn't use it, so simply remove the unused header.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Link: https://lore.kernel.org/r/20240305161539.1364717-3-andriy.shevchenko@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
intel-mid.h is providing some core parts of the South Complex PM,
which are usually not used by individual drivers. In particular,
this driver doesn't use it, so simply remove the unused header.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Link: https://lore.kernel.org/r/20240305161539.1364717-2-andriy.shevchenko@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
The length of the policy buffer is not validated before accessing it,
which means that multiple out-of-bounds memory accesses can occur.
This is especially bad since userspace can load policy binaries over
debugfs.
Compile-tested only.
Fixes: 7c45534afa44 ("platform/x86/amd/pmf: Add support for PMF Policy Binary")
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Reviewed-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20240304205005.10078-5-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
