| Age | Commit message (Collapse) | Author |
|---|
|
Set ACPI node as the primary fwnode of I2C adapter to allow
enumeration of child devices from the ACPI table
Signed-off-by: Zubair Waheed <zwaheed@nvidia.com>
Signed-off-by: Akhil R <akhilrajeev@nvidia.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
Fix to return a negative error code from the gi2c->err instead of
0.
Fixes: d8703554f4de ("i2c: qcom-geni: Add support for GPI DMA")
Signed-off-by: Wang Yufen <wangyufen@huawei.com>
Reviewed-by: Tommaso Merciai <tommaso.merciai@amarulasoluitons.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
Commit "i2c: cadence: Add standard bus recovery support" breaks for i2c
devices that have no pinctrl defined. There is no requirement for this
to exist in the DT. This has worked perfectly well without this before in
at least 1 real usage case on hardware (Mali Komeda DPU, Cadence i2c to
talk to a tda99xx phy). Adding the requirement to have pinctrl set up in
the device tree (or otherwise be found) is a regression where the whole
i2c device is lost entirely (in this case dropping entire devices which
then leads to the drm display stack unable to find the phy for display
output, thus having no drm display device and so on down the chain).
This converts the above commit to an enhancement if pinctrl can be found
for the i2c device, providing a timeout on read with recovery, but if not,
do what used to be done rather than a fatal loss of a device.
This restores the mentioned display devices to their working state again.
Fixes: 58b924241d0a ("i2c: cadence: Add standard bus recovery support")
Signed-off-by: Carsten Haitzler <carsten.haitzler@arm.com>
Reviewed-by: Shubhrajyoti Datta <shubhrajyoti.datta@amd.com>
Reviewed-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Acked-by: Michal Simek <michal.simek@amd.com>
[wsa: added braces to else-branch]
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
On my x05 laptop I got:
Memory type 0x12 not supported yet, not instantiating SPD
Adding the 0x12 case lead to a successful instantiated SPD AT24 EEPROM.
i801_smbus 0000:00:1f.3: SMBus using polling
i2c i2c-6: 2/2 memory slots populated (from DMI)
at24 6-0050: 256 byte spd EEPROM, read-only
i2c i2c-6: Successfully instantiated SPD at 0x50
at24 6-0051: 256 byte spd EEPROM, read-only
And then, I decoded it successfully via decode-dimms.
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
In zoned mode, zones with write pointers can have conditions "read-only"
or "offline". In read-only condition, zones can not be written. In
offline condition, the zones can be neither written nor read. These
conditions are intended for zones with media failures, then it is
difficult to set those conditions to zones on real devices.
To test handling of zones in the conditions, add a feature to null_blk
to set up zones in read-only or offline condition. Add new configuration
attributes "zone_readonly" and "zone_offline". Write a sector to the
attribute files to specify the target zone to set the zone conditions.
For example, following command lines do it:
echo 0 > nullb1/zone_readonly
echo 524288 > nullb1/zone_offline
When the specified zones are already in read-only or offline condition,
normal empty condition is restored to the zones. These condition changes
can be done only after the null_blk device get powered, since status
area of each zone is not yet allocated before power-on.
Also improve zone condition checks to inhibit all commands for zones in
offline conditions. In same manner, inhibit write and zone management
commands for zones in read-only condition.
Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Link: https://lore.kernel.org/r/20221201061036.2342206-1-shinichiro.kawasaki@wdc.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
nfit_test overrode the security_show() sysfs attribute function in nvdimm
dimm_devs in order to allow testing of security unlock. With the
introduction of CXL security commands, the trick to override
security_show() becomes significantly more complicated. By introdcing a
security flag CONFIG_NVDIMM_SECURITY_TEST, libnvdimm can just toggle the
check via a compile option. In addition the original override can can be
removed from tools/testing/nvdimm/.
The flag will also be used to bypass cpu_cache_invalidate_memregion() when
set in a different commit. This allows testing on QEMU with nfit_test or
cxl_test since cpu_cache_has_invalidate_memregion() checks whether
X86_FEATURE_HYPERVISOR cpu feature flag is set on x86.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/166983618758.2734609.18031639517065867138.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Add provider name in order to associate cxl test dimm from cxl_test to the
cxl pmem device when going through sysfs for security testing.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/166983618174.2734609.15600031015423828810.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Add an id group attribute for CXL based nvdimm object. The addition allows
ndctl to display the "unique id" for the nvdimm. The serial number for the
CXL memory device will be used for this id.
[
{
"dev":"nmem10",
"id":"0x4",
"security":"disabled"
},
]
The id attribute is needed by the ndctl security key management to setup a
keyblob with a unique file name tied to the mem device.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/166983617029.2734609.8251308562882142281.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
The original nvdimm_security_ops ->disable() only supports user passphrase
for security disable. The CXL spec introduced the disabling of master
passphrase. Add a ->disable_master() callback to support this new operation
and leaving the old ->disable() mechanism alone. A "disable_master" command
is added for the sysfs attribute in order to allow command to be issued
from userspace. ndctl will need enabling in order to utilize this new
operation.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/166983616454.2734609.14204031148234398086.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Create callback function to support the nvdimm_security_ops() ->erase()
callback. Translate the operation to send "Passphrase Secure Erase"
security command for CXL memory device.
When the mem device is secure erased, cpu_cache_invalidate_memregion() is
called in order to invalidate all CPU caches before attempting to access
the mem device again.
See CXL 3.0 spec section 8.2.9.8.6.6 for reference.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/166983615293.2734609.10358657600295932156.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Create callback function to support the nvdimm_security_ops() ->unlock()
callback. Translate the operation to send "Unlock" security command for CXL
mem device.
When the mem device is unlocked, cpu_cache_invalidate_memregion() is called
in order to invalidate all CPU caches before attempting to access the mem
device.
See CXL rev3.0 spec section 8.2.9.8.6.4 for reference.
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/166983614167.2734609.15124543712487741176.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Create callback function to support the nvdimm_security_ops() ->freeze()
callback. Translate the operation to send "Freeze Security State" security
command for CXL memory device.
See CXL rev3.0 spec section 8.2.9.8.6.5 for reference.
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/166983613019.2734609.10645754779802492122.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Create callback function to support the nvdimm_security_ops ->disable()
callback. Translate the operation to send "Disable Passphrase" security
command for CXL memory device. The operation supports disabling a
passphrase for the CXL persistent memory device. In the original
implementation of nvdimm_security_ops, this operation only supports
disabling of the user passphrase. This is due to the NFIT version of
disable passphrase only supported disabling of user passphrase. The CXL
spec allows disabling of the master passphrase as well which
nvidmm_security_ops does not support yet. In this commit, the callback
function will only support user passphrase.
See CXL rev3.0 spec section 8.2.9.8.6.3 for reference.
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/166983611878.2734609.10602135274526390127.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Create callback function to support the nvdimm_security_ops ->change_key()
callback. Translate the operation to send "Set Passphrase" security command
for CXL memory device. The operation supports setting a passphrase for the
CXL persistent memory device. It also supports the changing of the
currently set passphrase. The operation allows manipulation of a user
passphrase or a master passphrase.
See CXL rev3.0 spec section 8.2.9.8.6.2 for reference.
However, the spec leaves a gap WRT master passphrase usages. The spec does
not define any ways to retrieve the status of if the support of master
passphrase is available for the device, nor does the commands that utilize
master passphrase will return a specific error that indicates master
passphrase is not supported. If using a device does not support master
passphrase and a command is issued with a master passphrase, the error
message returned by the device will be ambiguous.
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/166983610751.2734609.4445075071552032091.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Document difference between amdgpu.gartsize and amdgpu.gttsize
module parameters, as initially explained by Alex Deucher here:
https://lists.freedesktop.org/archives/dri-devel/2022-October/375358.html
v2: minor cleanups (Alex)
Signed-off-by: Peter Maucher <bellosilicio@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Replace the open-code with sysfs_emit() to simplify the code.
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This fixes DMCU initialization in APU GPU passthrough. The
DMCU needs the GPU physical address, not the CPU physical
address. This ends up working out on bare metal because
we always use the physical address, but doesn't work in
passthrough because the addresses are different.
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Under virtualization guest needs to receive notification from host to
perform reset in some cases. Add nv mailbox irq in soc21.
Signed-off-by: YuBiao Wang <YuBiao.Wang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
So that uses PSP to initialize HW.
Fixes: 0c2c02b66c672e ("drm/amdgpu/vcn: add firmware support for dimgrey_cavefish")
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: James Zhu <James.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
So that uses PSP to initialize HW.
Fixes: 0c2c02b66c672e ("drm/amdgpu/vcn: add firmware support for dimgrey_cavefish")
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: James Zhu <James.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon fixes from Guenter Roeck:
- Fix refcount leak and NULL pointer access in coretemp driver
- Fix UAF in ibmpex driver
- Add missing pci_disable_device() to i5500_temp driver
- Fix calculation in ina3221 driver
- Fix temperature scaling in ltc2947 driver
- Check result of devm_kcalloc call in asus-ec-sensors driver
* tag 'hwmon-for-v6.1-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (asus-ec-sensors) Add checks for devm_kcalloc
hwmon: (coretemp) fix pci device refcount leak in nv1a_ram_new()
hwmon: (coretemp) Check for null before removing sysfs attrs
hwmon: (ibmpex) Fix possible UAF when ibmpex_register_bmc() fails
hwmon: (i5500_temp) fix missing pci_disable_device()
hwmon: (ina3221) Fix shunt sum critical calculation
hwmon: (ltc2947) fix temperature scaling
|
|
Originally-from: Andreas Gruenbacher <agruen@linbit.com>
Signed-off-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com>
Link: https://lore.kernel.org/r/20221201110349.1282687-6-christoph.boehmwalder@linbit.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Use call site specific ratelimit instead of one single static global.
Also ratelimit ASSERTION messages generated by expect().
Originally-from: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com>
Link: https://lore.kernel.org/r/20221201110349.1282687-5-christoph.boehmwalder@linbit.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Incorporate as many out-of-tree changes as possible without changing the
genl API.
Over the years, we restructured this several times, and also changed the
log format.
One breaking change is that DRBD 9 gained "implicit options", like a
connection name. This cannot be replayed here without changing the API,
so save it for later.
Originally-from: Andreas Gruenbacher <agruen@linbit.com>
Originally-from: Philipp Reisner <philipp.reisner@linbit.com>
Originally-from: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com>
Link: https://lore.kernel.org/r/20221201110349.1282687-4-christoph.boehmwalder@linbit.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Signed-off-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com>
Link: https://lore.kernel.org/r/20221201110349.1282687-3-christoph.boehmwalder@linbit.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Unify how failed assertions from D_ASSERT() and expect() are logged.
Originally-from: Andreas Gruenbacher <agruen@linbit.com>
Signed-off-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com>
Link: https://lore.kernel.org/r/20221201110349.1282687-2-christoph.boehmwalder@linbit.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
http://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next
This is the second pull request intended for v6.2
It contains two patch-sets sent before with the following content:
* iwlwifi EHT adjustments
* double-free fix in tx path
* iwlmei PLDR flow fixes
* iwlmei smatch fixes
* a logging data improvement
|
|
As the devm_kcalloc may return NULL, the return value needs to be checked
to avoid NULL poineter dereference.
Fixes: d0ddfd241e57 ("hwmon: (asus-ec-sensors) add driver for ASUS EC")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Link: https://lore.kernel.org/r/20221125014329.121560-1-yuancan@huawei.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
As comment of pci_get_domain_bus_and_slot() says, it returns
a pci device with refcount increment, when finish using it,
the caller must decrement the reference count by calling
pci_dev_put(). So call it after using to avoid refcount leak.
Fixes: 14513ee696a0 ("hwmon: (coretemp) Use PCI host bridge ID to identify CPU if necessary")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20221118093303.214163-1-yangyingliang@huawei.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
If coretemp_add_core() gets an error then pdata->core_data[indx]
is already NULL and has been kfreed. Don't pass that to
sysfs_remove_group() as that will crash in sysfs_remove_group().
[Shortened for readability]
[91854.020159] sysfs: cannot create duplicate filename '/devices/platform/coretemp.0/hwmon/hwmon2/temp20_label'
<cpu offline>
[91855.126115] BUG: kernel NULL pointer dereference, address: 0000000000000188
[91855.165103] #PF: supervisor read access in kernel mode
[91855.194506] #PF: error_code(0x0000) - not-present page
[91855.224445] PGD 0 P4D 0
[91855.238508] Oops: 0000 [#1] PREEMPT SMP PTI
...
[91855.342716] RIP: 0010:sysfs_remove_group+0xc/0x80
...
[91855.796571] Call Trace:
[91855.810524] coretemp_cpu_offline+0x12b/0x1dd [coretemp]
[91855.841738] ? coretemp_cpu_online+0x180/0x180 [coretemp]
[91855.871107] cpuhp_invoke_callback+0x105/0x4b0
[91855.893432] cpuhp_thread_fun+0x8e/0x150
...
Fix this by checking for NULL first.
Signed-off-by: Phil Auld <pauld@redhat.com>
Cc: linux-hwmon@vger.kernel.org
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Jean Delvare <jdelvare@suse.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20221117162313.3164803-1-pauld@redhat.com
Fixes: 199e0de7f5df3 ("hwmon: (coretemp) Merge pkgtemp with coretemp")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
If create_regulator() fails in set_supply(), the module refcount
needs be put to keep refcount balanced.
Fixes: e2c09ae7a74d ("regulator: core: Increase refcount for regulator supply's module")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20221201122706.4055992-2-yangyingliang@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Configure related registers.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Enable reg active poll in mes11.
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Tested-and-acked-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Update the api def of mes11.
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Tested-and-acked-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Change the ioctl codes from DM_DEV_ARM_POLL to DM_DEV_ARM_POLL_CMD and
from DM_GET_TARGET_VERSION to DM_GET_TARGET_VERSION_CMD.
Note that the "cmd" field of "struct _ioctls" is never used, thus this
commit doesn't fix any bug, it just makes the code consistent.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
|
No need to modify info->vers if we overwrite it immediately.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
|
If a thinpool set fail_io while suspending, resume will fail with:
device-mapper: resume ioctl on vg-thinpool failed: Invalid argument
The thin-pool also can't be removed if an in-flight bio is in the
deferred list.
This can be easily reproduced using:
echo "offline" > /sys/block/sda/device/state
dd if=/dev/zero of=/dev/mapper/thin bs=4K count=1
dmsetup suspend /dev/mapper/pool
mkfs.ext4 /dev/mapper/thin
dmsetup resume /dev/mapper/pool
The root cause is maybe_resize_data_dev() will check fail_io and return
error before called dm_resume.
Fix this by adding FAIL mode check at the end of pool_preresume().
Cc: stable@vger.kernel.org
Fixes: da105ed5fd7e ("dm thin metadata: introduce dm_pool_abort_metadata")
Signed-off-by: Luo Meng <luomeng12@huawei.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
|
Otherwise the commit that will be aborted will be associated with the
metadata objects that will be torn down. Must write needs_check flag
to metadata with a reset block manager.
Found through code-inspection (and compared against dm-thin.c).
Cc: stable@vger.kernel.org
Fixes: 028ae9f76f29 ("dm cache: add fail io mode and needs_check flag")
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
|
Same ABBA deadlock pattern fixed in commit 4b60f452ec51 ("dm thin: Fix
ABBA deadlock between shrink_slab and dm_pool_abort_metadata") to
DM-cache's metadata.
Reported-by: Zhihao Cheng <chengzhihao1@huawei.com>
Cc: stable@vger.kernel.org
Fixes: 028ae9f76f29 ("dm cache: add fail io mode and needs_check flag")
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
|
Following concurrent processes:
P1(drop cache) P2(kworker)
drop_caches_sysctl_handler
drop_slab
shrink_slab
down_read(&shrinker_rwsem) - LOCK A
do_shrink_slab
super_cache_scan
prune_icache_sb
dispose_list
evict
ext4_evict_inode
ext4_clear_inode
ext4_discard_preallocations
ext4_mb_load_buddy_gfp
ext4_mb_init_cache
ext4_read_block_bitmap_nowait
ext4_read_bh_nowait
submit_bh
dm_submit_bio
do_worker
process_deferred_bios
commit
metadata_operation_failed
dm_pool_abort_metadata
down_write(&pmd->root_lock) - LOCK B
__destroy_persistent_data_objects
dm_block_manager_destroy
dm_bufio_client_destroy
unregister_shrinker
down_write(&shrinker_rwsem)
thin_map |
dm_thin_find_block ↓
down_read(&pmd->root_lock) --> ABBA deadlock
, which triggers hung task:
[ 76.974820] INFO: task kworker/u4:3:63 blocked for more than 15 seconds.
[ 76.976019] Not tainted 6.1.0-rc4-00011-g8f17dd350364-dirty #910
[ 76.978521] task:kworker/u4:3 state:D stack:0 pid:63 ppid:2
[ 76.978534] Workqueue: dm-thin do_worker
[ 76.978552] Call Trace:
[ 76.978564] __schedule+0x6ba/0x10f0
[ 76.978582] schedule+0x9d/0x1e0
[ 76.978588] rwsem_down_write_slowpath+0x587/0xdf0
[ 76.978600] down_write+0xec/0x110
[ 76.978607] unregister_shrinker+0x2c/0xf0
[ 76.978616] dm_bufio_client_destroy+0x116/0x3d0
[ 76.978625] dm_block_manager_destroy+0x19/0x40
[ 76.978629] __destroy_persistent_data_objects+0x5e/0x70
[ 76.978636] dm_pool_abort_metadata+0x8e/0x100
[ 76.978643] metadata_operation_failed+0x86/0x110
[ 76.978649] commit+0x6a/0x230
[ 76.978655] do_worker+0xc6e/0xd90
[ 76.978702] process_one_work+0x269/0x630
[ 76.978714] worker_thread+0x266/0x630
[ 76.978730] kthread+0x151/0x1b0
[ 76.978772] INFO: task test.sh:2646 blocked for more than 15 seconds.
[ 76.979756] Not tainted 6.1.0-rc4-00011-g8f17dd350364-dirty #910
[ 76.982111] task:test.sh state:D stack:0 pid:2646 ppid:2459
[ 76.982128] Call Trace:
[ 76.982139] __schedule+0x6ba/0x10f0
[ 76.982155] schedule+0x9d/0x1e0
[ 76.982159] rwsem_down_read_slowpath+0x4f4/0x910
[ 76.982173] down_read+0x84/0x170
[ 76.982177] dm_thin_find_block+0x4c/0xd0
[ 76.982183] thin_map+0x201/0x3d0
[ 76.982188] __map_bio+0x5b/0x350
[ 76.982195] dm_submit_bio+0x2b6/0x930
[ 76.982202] __submit_bio+0x123/0x2d0
[ 76.982209] submit_bio_noacct_nocheck+0x101/0x3e0
[ 76.982222] submit_bio_noacct+0x389/0x770
[ 76.982227] submit_bio+0x50/0xc0
[ 76.982232] submit_bh_wbc+0x15e/0x230
[ 76.982238] submit_bh+0x14/0x20
[ 76.982241] ext4_read_bh_nowait+0xc5/0x130
[ 76.982247] ext4_read_block_bitmap_nowait+0x340/0xc60
[ 76.982254] ext4_mb_init_cache+0x1ce/0xdc0
[ 76.982259] ext4_mb_load_buddy_gfp+0x987/0xfa0
[ 76.982263] ext4_discard_preallocations+0x45d/0x830
[ 76.982274] ext4_clear_inode+0x48/0xf0
[ 76.982280] ext4_evict_inode+0xcf/0xc70
[ 76.982285] evict+0x119/0x2b0
[ 76.982290] dispose_list+0x43/0xa0
[ 76.982294] prune_icache_sb+0x64/0x90
[ 76.982298] super_cache_scan+0x155/0x210
[ 76.982303] do_shrink_slab+0x19e/0x4e0
[ 76.982310] shrink_slab+0x2bd/0x450
[ 76.982317] drop_slab+0xcc/0x1a0
[ 76.982323] drop_caches_sysctl_handler+0xb7/0xe0
[ 76.982327] proc_sys_call_handler+0x1bc/0x300
[ 76.982331] proc_sys_write+0x17/0x20
[ 76.982334] vfs_write+0x3d3/0x570
[ 76.982342] ksys_write+0x73/0x160
[ 76.982347] __x64_sys_write+0x1e/0x30
[ 76.982352] do_syscall_64+0x35/0x80
[ 76.982357] entry_SYSCALL_64_after_hwframe+0x63/0xcd
Function metadata_operation_failed() is called when operations failed
on dm pool metadata, dm pool will destroy and recreate metadata. So,
shrinker will be unregistered and registered, which could down write
shrinker_rwsem under pmd_write_lock.
Fix it by allocating dm_block_manager before locking pmd->root_lock
and destroying old dm_block_manager after unlocking pmd->root_lock,
then old dm_block_manager is replaced with new dm_block_manager under
pmd->root_lock. So, shrinker register/unregister could be done without
holding pmd->root_lock.
Fetch a reproducer in [Link].
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216676
Cc: stable@vger.kernel.org #v5.2+
Fixes: e49e582965b3 ("dm thin: add read only and fail io modes")
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
|
Some combinations of hosts cannnot detect mt7921e after reboot. The
interoperability issue is caused by the status mismatch between host
and chip fw. In such cases, the driver should stop chip activities
and reset chip to default state before reboot.
Suggested-by: angelogioacchino.delregno@collabora.com
Co-developed-by: Deren Wu <deren.wu@mediatek.com>
Signed-off-by: Deren Wu <deren.wu@mediatek.com>
Signed-off-by: Leon Yen <Leon.Yen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Rename mt7915_wed_release_rx_buf in mt7915_mmio_wed_release_rx_buf,
mt7915_wed_init_rx_buf in mt7915_mmio_wed_init_rx_buf and
mt7915_wed_release_rx_buf in mt7915_mmio_wed_release_rx_buf
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
The SPR parameter set comprises OBSS PD threshold for SRG and
non SRG and Bitmap of BSS color and partial BSSID. This adds
support to configure fields of SPR element to firmware.
User can disable firmware SR algorithms by turning sr_scene_detect off.
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
This reports signal strength of ACK packets from the peer as measured
at each interface.
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
This adds selectable RTC/CTS enablement for each interface.
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
The commit dc44c45c8cd0 added band_idx into mt76_phy, so switching to
rely on that.
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
This power should override the per bandwidth max power that the
device emits.
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Add a helper for common boundary check. This is a preliminary patch
to add per bandwidth power control.
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
As comment of pci_get_device() says, it returns a pci_device with its
refcount increased. We need to call pci_dev_put() to decrease the
refcount. Save the return value of pci_get_device() and call
pci_dev_put() to decrease the refcount.
Fixes: 9093cfff72e3 ("mt76: mt7915: add support for using a secondary PCIe link for gen1")
Fixes: 2e30db0dde61 ("mt76: mt7915: add device id for mt7916")
Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
skip invalid section to avoid potential risks
Fixes: 23bdc5d8cadf ("wifi: mt76: mt7921: introduce Country Location Control support")
Signed-off-by: Deren Wu <deren.wu@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
