| Age | Commit message (Collapse) | Author |
|---|
|
The functions qat_alg_sgl_to_bufl() and qat_alg_free_bufl() take as
argument a qat_crypto_instance and a qat_crypto_request structure.
These two structures are used only to get a reference to the
adf_accel_dev and qat_crypto_request_buffs.
In order to reuse these functions for the compression service, change
the signature so that they take adf_accel_dev and
qat_crypto_request_buffs.
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Wojciech Ziemba <wojciech.ziemba@intel.com>
Reviewed-by: Adam Guerin <adam.guerin@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Rename the functions qat_alg_sgl_to_bufl() and qat_alg_free_bufl() as
qat_bl_sgl_to_bufl() and qat_bl_free_bufl() after their relocation into
the qat_bl module.
This commit does not implement any functional change.
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Move the logic that maps, unmaps and converts scatterlists into QAT
bufferlists from qat_algs.c to a new module, qat_bl.
This is to allow reuse of the logic by the data compression service.
This commit does not implement any functional change.
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Wojciech Ziemba <wojciech.ziemba@intel.com>
Reviewed-by: Adam Guerin <adam.guerin@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
When eisa_driver_register() or tc_register_driver() failed,
the modprobe defxx would fail with some err log as follows:
Error: Driver 'defxx' is already registered, aborting...
Fix this issue by adding err hanling in dfx_init().
Fixes: e89a2cfb7d7b5 ("[TC] defxx: TURBOchannel support")
Signed-off-by: Yongqiang Liu <liuyongqiang13@huawei.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When the clock is less than 400K, some SD cards fail to initialize
because CLK_AUTO is enabled.
Fixes: fb8bd90f83c4 ("mmc: sdhci-sprd: Add Spreadtrum's initial host controller")
Signed-off-by: Wenchao Chen <wenchao.chen@unisoc.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20221207051909.32126-1-wenchao.chen@unisoc.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
No functional modification involved.
drivers/mmc/host/sdhci-of-esdhc.c:243: warning: expecting prototype for _fixup(). Prototype was for esdhc_writel_fixup() instead.
drivers/mmc/host/sdhci-of-esdhc.c:117: warning: expecting prototype for _fixup(). Prototype was for esdhc_readl_fixup() instead.
Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=3397
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20221209034134.38477-1-jiapeng.chong@linux.alibaba.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Follow the advice of the Documentation/filesystems/sysfs.rst and show()
should only use sysfs_emit() or sysfs_emit_at() when formatting the
value to be returned to user space.
Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn>
Link: https://lore.kernel.org/r/202212081138191215291@zte.com.cn
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Delete a few lines of "depends on PHYLIB" since they are inside
an "if PHYLIB / endif # PHYLIB" block, i.e., they are redundant
and the other 50+ drivers there don't use "depends on PHYLIB"
since it is not needed.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Heiner Kallweit <hkallweit1@gmail.com>
Cc: Russell King <linux@armlinux.org.uk>
Link: https://lore.kernel.org/r/20221207044257.30036-1-rdunlap@infradead.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Introduce __mtk_wed_detach() in order to avoid a deadlock in
mtk_wed_attach routine if mtk_wed_wo_init fails since both
mtk_wed_attach and mtk_wed_detach run holding hw_lock mutex.
Fixes: 4c5de09eb0d0 ("net: ethernet: mtk_wed: add configure wed wo support")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fix possible NULL pointer dereference in mtk_wed_detach routine checking
wo pointer is properly allocated before running mtk_wed_wo_reset() and
mtk_wed_wo_deinit().
Even if it is just a theoretical issue at the moment check wo pointer is
not NULL in mtk_wed_mcu_msg_update.
Moreover, honor mtk_wed_mcu_send_msg return value in mtk_wed_wo_reset()
Fixes: 799684448e3e ("net: ethernet: mtk_wed: introduce wed wo support")
Fixes: 4c5de09eb0d0 ("net: ethernet: mtk_wed: add configure wed wo support")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
There is a spelling mistake in a nn_dp_warn message. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20221207094312.2281493-1-colin.i.king@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
As explained in the previous patch, the existing Spectrum-2 ip6gre
implementation can be reused for Spectrum-1. Change the Spectrum-1
ip6gre operations structure to use the common operations.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
There are two main differences between Spectrum-1 and newer ASICs in
terms of IP-in-IP support:
1. In Spectrum-1, RIFs representing ip6gre tunnels require two entries
in the RIF table.
2. In Spectrum-2 and newer ASICs, packets ingress the underlay (during
encapsulation) and egress the underlay (during decapsulation) via a
special generic loopback RIF.
The first difference was handled in previous patches by adding the
'double_rif_entry' field to the Spectrum-1 operations structure of
ip6gre RIFs. The second difference is handled during RIF creation, by
only creating a generic loopback RIF in Spectrum-2 and newer ASICs.
Therefore, the ip6gre operations can be shared between Spectrum-1 and
newer ASIC in a similar fashion to how the ipgre operations are shared.
Rename the operations to not be Spectrum-2 specific and move them
earlier in the file so that they could later be used for Spectrum-1.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In Spectrum-1, loopback router interfaces (RIFs) used for IP-in-IP
encapsulation with an IPv6 underlay require two RIF entries and the RIF
index must be even.
Prepare for this change by extending the RIF parameters structure with a
'double_entry' field that indicates if the RIF being created requires
two RIF entries or not. Only set it for RIFs representing ip6gre tunnels
in Spectrum-1.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently, each router interface (RIF) consumes one entry in the RIFs
table. This is going to change in subsequent patches where some RIFs
will consume two table entries.
Prepare for this change by parametrizing the RIF allocation size. For
now, always pass '1'.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently, each router interface (RIF) consumes one entry in the RIFs
table and there are no alignment constraints. This is going to change in
subsequent patches where some RIFs will consume two table entries and
their indexes will need to be aligned to the allocation size (even).
Prepare for this change by converting the RIF index allocation to use
gen_pool with the 'gen_pool_first_fit_order_align' algorithm.
No Kconfig changes necessary as mlxsw already selects
'GENERIC_ALLOCATOR'.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
No conflicts.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The elan touchscreen datasheet says that the reset GPIO only needs to
be asserted for 500us in order to reset the regulator. The problem is
that some boards need a level shifter between the signals on the GPIO
controller and the signals on the touchscreen. All of these extra
components on the line can slow the transition of the signals. On one
board, we measured the reset line and saw that it took almost 1.8ms to
go low. Even after we bumped up the "drive strength" of the signal
from the default 2mA to 8mA we still saw it take 421us for the signal
to go low.
In order to account for this let's lengthen the amount of time that we
keep the reset asserted. Let's bump it up from 500us to 5000us.
That's still a relatively short amount of time and is much safer.
It should be noted that this fixes real problems. Case in point:
1. The touchscreen power rail may be shared with another device (like
an eDP panel). That means that at probe time power might already be
on.
2. In probe we grab the reset GPIO and assert it (make it low).
3. We turn on power (a noop since it was already on).
4. We wait 500us.
5. We deassert the reset GPIO.
With the above case and only a 500us delay we saw only a partial reset
asserted, which is bad. Giving it 5ms is overkill but feels safer in
case someone else has a different level shifter setup.
Note that bumping up the delay to 5000 means that some configs yell
about using udelay(). We'll change to using usleep_range(). We give a
small range here because:
- This isn't a delay that happens very often so we don't need to worry
about giving a big range to allow for power efficiency.
- usleep_range() is known to almost always pick the upper bound and
delay that long and we really don't want to slow down the power on
of the touchscreen that much.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Link: https://lore.kernel.org/r/20221208180603.v2.5.I6edfb3f459662c041563a54e5b7df727c27caaba@changeid
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-next
amd-drm-next-6.2-2022-12-07:
amdgpu:
- DSC fixes for DCN 2.1
- HDMI PCON fixes
- PSR fixes
- DC DML fixes
- Properly throttle on BO allocation
- GFX 11.0.4 fixes
- MMHUB fix
- Make some functions static
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221207232439.5908-1-alexander.deucher@amd.com
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-next
amd-drm-next-6.2-2022-12-02:
amdgpu:
- Fix CPU stalls when allocating large amounts of system memory
- SR-IOV fixes
- BACO fixes
- Enable GC 11.0.4
- Enable PSP 13.0.11
- Enable SMU 13.0.11
- Enable NBIO 7.7.1
- Fix reported VCN capabilities for RDNA2
- Misc cleanups
- PCI ref count fixes
- DCN DPIA fixes
- DCN 3.2.x fixes
- Documentation updates
- GC 11.x fixes
- VCN RAS fixes
- APU fix for passthrough
- PSR fixes
- GFX preemption support for gfx9
- SDMA fix for S0ix
amdkfd:
- Enable KFD support for GC 11.0.4
- Misc cleanups
- Fix memory leak
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221202160659.5987-1-alexander.deucher@amd.com
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-next
Some deferred-io and damage worker reworks revert and make a fb function
static
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20221208084040.yw4zavsjd25qsltf@houat
|
|
Fix syntax generating the following kernel-doc warnings:
drivers/clk/clk-lmk04832.c:189: warning: cannot understand function prototype: 'struct lmk04832_device_info '
drivers/clk/clk-lmk04832.c:193: warning: Function parameter or member 'pid' not described in 'lmk04832_device_info'
drivers/clk/clk-lmk04832.c:193: warning: Function parameter or member 'maskrev' not described in 'lmk04832_device_info'
drivers/clk/clk-lmk04832.c:193: warning: Function parameter or member 'num_channels' not described in 'lmk04832_device_info'
drivers/clk/clk-lmk04832.c:193: warning: Function parameter or member 'vco0_range' not described in 'lmk04832_device_info'
drivers/clk/clk-lmk04832.c:193: warning: Function parameter or member 'vco1_range' not described in 'lmk04832_device_info'
drivers/clk/clk-lmk04832.c:420: warning: No description found for return value of 'lmk04832_check_vco_ranges'
drivers/clk/clk-lmk04832.c:459: warning: No description found for return value of 'lmk04832_calc_pll2_params'
Signed-off-by: Liam Beguin <liambeguin@gmail.com>
Link: https://lore.kernel.org/r/20221120030257.531153-5-liambeguin@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
iwyu warnings: (new ones prefixed by >>)
>> drivers/clk/clk-lmk04832.c:15:1: iwyu: warning: superfluous #include <linux/debugfs.h>
>> drivers/clk/clk-lmk04832.c:20:1: iwyu: warning: superfluous #include <linux/uaccess.h>
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/all/202107110620.926Sm95z-lkp@intel.com/
Signed-off-by: Liam Beguin <liambeguin@gmail.com>
Link: https://lore.kernel.org/r/20221120030257.531153-4-liambeguin@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Semicolons on the closing brace of a function definition are
unnecessary, remove them.
Signed-off-by: Liam Beguin <liambeguin@gmail.com>
Link: https://lore.kernel.org/r/20221120030257.531153-3-liambeguin@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Fix the following warning reported by the kernel test robot.
cppcheck possible warnings: (new ones prefixed by >>, may not real problems)
>> drivers/clk/clk-lmk04832.c:357:15: warning: Variable 'pll2_p' can be declared with const [constVariable]
unsigned int pll2_p[] = {8, 2, 2, 3, 4, 5, 6, 7};
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/all/202203312017.5YW13Jr4-lkp@intel.com/
Signed-off-by: Liam Beguin <liambeguin@gmail.com>
Link: https://lore.kernel.org/r/20221120030257.531153-2-liambeguin@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Free @socfpga_clk and @ops on the error path to avoid memory leak issue.
Fixes: a30a67be7b6e ("clk: socfpga: Don't have get_parent for single parent ops")
Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com>
Link: https://lore.kernel.org/r/20221123031622.63171-1-xiujianfeng@huawei.com
Acked-by: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
With the intent of removing driver selects from Kconfig.socs in
arch/riscv, essential drivers that were being selected there could
instead by enabled by defaulting them to the value of the SoC's Kconfig
symbol.
Do so here & drop the depend on RISC-V - the SOC_ symbols are only
defined there anyway.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20221123161921.81195-1-conor@kernel.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Pull drm fixes from Dave Airlie:
"Last set of fixes for final, scattered bunch of fixes, two amdgpu, one
vmwgfx, and some misc others.
amdgpu:
- S0ix fix
- DCN 3.2 array out of bounds fix
shmem:
- Fixes to shmem-helper error paths
bridge:
- Fix polarity bug in bridge/ti-sn65dsi86
dw-hdmi:
- Prefer 8-bit RGB fallback before any YUV mode in dw-hdmi, since
some panels lie about YUV support
vmwgfx:
- Stop using screen objects when SEV is active"
* tag 'drm-fixes-2022-12-09' of git://anongit.freedesktop.org/drm/drm:
drm/amd/display: fix array index out of bound error in DCN32 DML
drm/amdgpu/sdma_v4_0: turn off SDMA ring buffer in the s2idle suspend
drm/vmwgfx: Don't use screen objects when SEV is active
drm/shmem-helper: Avoid vm_open error paths
drm/shmem-helper: Remove errant put in error path
drm: bridge: dw_hdmi: fix preference of RGB modes over YUV420
drm/bridge: ti-sn65dsi86: Fix output polarity setting bug
drm/vmwgfx: Fix race issue calling pin_user_pages
|
|
git://anongit.freedesktop.org/drm/drm-intel into drm-next
- Multi-cast register fix (Matt)
- Fix workarounds on gen2-3 (Tvrtko)
- Bigjoiner fix (Ville)
- Make Guc default_list a const data (Jani)
- Acquire forcewake before uncore read (Umesh)
- Selftest fix (Umesh)
- HuC related fixes (Daniele)
- Fix some incorrect return values (Janusz)
- Fix a memory leak in bios related code (Xia)
- Fix VBT send packet port selection (Mikko)
- DG2's DMC fix bump for Register noclaims and few restore (Gustavo)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Y4jZBRw9KvlKgkr6@intel.com
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
drm-misc-fixes for v6.1 final?:
- Fix polarity bug in bridge/ti-sn65dsi86.
- Prefer 8-bit RGB fallback before any YUV mode in dw-hdmi, since some
panels lie about YUV support.
- Fixes to shmem-helper error paths.
- Small vmwgfx to stop using screen objects when SEV is active.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/8110f02d-d155-926e-8674-c88b806c3a3a@linux.intel.com
|
|
Add rx steering discarded packets counter to the vnic_diag debugfs.
Signed-off-by: Michael Guralnik <michaelgur@nvidia.com>
Reviewed-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Expand representor vport stat group to support all counters from the
vport stat group, to count all the traffic passing through the vport.
Fix current implementation where fill_stats and update_stats use
different structs.
Signed-off-by: Or Har-Toov <ohartoov@nvidia.com>
Reviewed-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Today multipath offload is only supported when the number of
nexthops is 2 which block the use of it in case of system with
2 NICs.
This patch solve it by enabling multipath offload per NIC if
2 nexthops of the route are its uplinks.
Signed-off-by: Maor Dickman <maord@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Initialize the meter object with the TC police mtu parameter.
Use the hardware range destination to compare the pkt len to the mtu setting.
Assign the range destination hit/miss ft to the police conform/exceed
attributes.
Signed-off-by: Oz Shlomo <ozsh@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
TC police action may configure the maximum packet size to be handled by
the policer, in addition to byte/packet rate.
MTU check is realized in hardware using the range destination, specifying
a hit ft, if packet len is in the range, or miss ft otherwise.
Instantiate mtu green/red flow tables with a single match-all rule.
Add the green/red actions to the hit/miss table accordingly.
Signed-off-by: Oz Shlomo <ozsh@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
TC police action may configure the maximum packet size to be handled by
the policer, in addition to byte/packet rate.
Currently the post meter table steers the packet according to the meter
aso output.
Refactor the code to allow both metering and range post actions as a
pre-step for adding police mtu offload support.
Signed-off-by: Oz Shlomo <ozsh@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Add support for matching on range.
The supported type of range is L2 frame size.
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Erez Shitrit <erezsh@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Up until now miss address in all the STEs was used to connect miss lists
and to link the last STE in the list to end anchor.
Match range STE will require special handling because its miss address is
part of the 'action'. That is, range action has hit and miss addresses.
Since the range action is always the last action, need to make sure that
its miss address isn't overwritten by the end anchor.
Adding new function mlx5dr_ste_is_miss_addr_set() to answer the question
whether the STE's miss address has already been set as part of STE
initialization. Use a callback that always returns false right now. Once
match range is added, a different callback will be used for that STE type.
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Erez Shitrit <erezsh@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
In preparation for MATCH RANGE STE support, create a function
to set the miss address of an STE.
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Erez Shitrit <erezsh@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
In many cases different actions will ask for the same definer format.
Instead of allocating new definer general object and running out of
definers, have an xarray of allocated definers and keep track of their
usage with refcounts: allocate a new definer only when there isn't
one with the same format already created, and destroy definer only
when its refcount runs down to zero.
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Alex Vesker <valex@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
As preparation for range action support, moving the handling
of final ICM address for flow table action to a separate function.
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Alex Vesker <valex@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
This patch handles the following two changes w.r.t. is_fw_table function:
1. When SW steering is asked to create/destroy FW table, we allow for
creation/destruction of only termination tables. Rename mlx5_dr_is_fw_table
both to comply with the static function naming and to reflect that we're
actually checking for FW termination table.
2. When the action 'go to flow table' is created, the destination flow
table can be any FW table, not only termination table. Adding function
to check if the dest table is FW table. This function will also be used
by the later creation of range match action, so putting it the header file.
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Alex Vesker <valex@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
SW steering is able to match only on the exact values of the packet fields,
as requested by the user: the user provides mask for the fields that are of
interest, and the exact values to be matched on when the traffic is handled.
Match Definer is a general FW object that defines which fields in the
packet will be referenced by the mask and tag of each STE. Match definer ID
is part of STE fields, and it defines how the HW needs to interpret the STE's
mask/tag values.
Till now SW steering used the definers that were managed by FW and implemented
the STE layout as described by the HW spec. Now that we're adding a new type
of STE, SW steering needs to define for the HW how it should interpret this
new STE's layout.
This is done with a programmable match definer.
The programmable definer allows to selects which fields will be included in
the definer, and their layout: it has up to 9 DW selectors 8 Byte selectors.
Each selector indicates a DW/Byte worth of fields out of the table that
is defined by HW spec by referencing the offset of the required DW/Byte.
This patch adds dr_cmd function to create and destroy MATCH_DEFINER
general object.
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Alex Vesker <valex@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Range is a new flow destination type which allows matching on
a range of values instead of matching on a specific value.
Range flow destination has the following fields:
- hit_ft: flow table to forward the traffic in case of hit
- miss_ft: flow table to forward the traffic in case of miss
- field: which packet characteristic to match on
- min: minimal value for the selected field
- max: maximal value for the selected field
Note:
- In order to match, the value in the packet should meet
the following criteria: min <= value < max
- Currently, the only supported field type is L2 packet length
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Alex Vesker <valex@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Conor Dooley <conor@kernel.org> says:
From: Conor Dooley <conor.dooley@microchip.com>
Submitted a patch yesterday defaulting the SiFive PLIC driver to
enabled [0], and in the ensuing conversation Marc suggested just doing a
select at the arch level and dropping the user selectability completely.
* b4-shazam-merge:
RISC-V: stop selecting SIFIVE_PLIC at the SoC level
irqchip/riscv-intc: remove user selectability of RISCV_INTC
irqchip/sifive-plic: remove user selectability of SIFIVE_PLIC
Link: https://lore.kernel.org/r/20221118104300.85016-1-conor@kernel.org
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/all/87zgceszp8.wl-maz@kernel.org/
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Since commit e71ee06e3ca3 ("RISC-V: Force select RISCV_INTC for
CONFIG_RISCV") the driver has been enabled at the arch level - and is
mandatory anyway. There's no point exposing this as a choice to users,
so stop bothering.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221118104300.85016-3-conor@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
The SiFive PLIC driver is used by all current implementations, including
those that do not have a SiFive PLIC. The current driver supports more
than just SiFive PLICs at present and, where possible, future PLIC
implementations will also use this driver. As every supported RISC-V SoC
selects the driver directly in Kconfig.socs there's no point in exposing
this kconfig option to users.
The Kconfig help text, in its current form, is misleading. There's no
point doing anything about that though, as it will no longer be user
selectable. Remove it.
Suggested-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221118104300.85016-2-conor@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Pull block fix from Jens Axboe:
"A small fix for initializing the NVMe quirks before initializing the
subsystem"
* tag 'block-6.1-2022-12-08' of git://git.kernel.dk/linux:
nvme initialize core quirks before calling nvme_init_subsystem
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bluetooth, can and netfilter.
Current release - new code bugs:
- bonding: ipv6: correct address used in Neighbour Advertisement
parsing (src vs dst typo)
- fec: properly scope IRQ coalesce setup during link up to supported
chips only
Previous releases - regressions:
- Bluetooth fixes for fake CSR clones (knockoffs):
- re-add ERR_DATA_REPORTING quirk
- fix crash when device is replugged
- Bluetooth:
- silence a user-triggerable dmesg error message
- L2CAP: fix u8 overflow, oob access
- correct vendor codec definition
- fix support for Read Local Supported Codecs V2
- ti: am65-cpsw: fix RGMII configuration at SPEED_10
- mana: fix race on per-CQ variable NAPI work_done
Previous releases - always broken:
- af_unix: diag: fetch user_ns from in_skb in unix_diag_get_exact(),
avoid null-deref
- af_can: fix NULL pointer dereference in can_rcv_filter
- can: slcan: fix UAF with a freed work
- can: can327: flush TX_work on ldisc .close()
- macsec: add missing attribute validation for offload
- ipv6: avoid use-after-free in ip6_fragment()
- nft_set_pipapo: actually validate intervals in fields after the
first one
- mvneta: prevent oob access in mvneta_config_rss()
- ipv4: fix incorrect route flushing when table ID 0 is used, or when
source address is deleted
- phy: mxl-gpy: add workaround for IRQ bug on GPY215B and GPY215C"
* tag 'net-6.1-rc9' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (77 commits)
net: dsa: sja1105: avoid out of bounds access in sja1105_init_l2_policing()
s390/qeth: fix use-after-free in hsci
macsec: add missing attribute validation for offload
net: mvneta: Fix an out of bounds check
net: thunderbolt: fix memory leak in tbnet_open()
ipv6: avoid use-after-free in ip6_fragment()
net: plip: don't call kfree_skb/dev_kfree_skb() under spin_lock_irq()
net: phy: mxl-gpy: add MDINT workaround
net: dsa: mv88e6xxx: accept phy-mode = "internal" for internal PHY ports
xen/netback: don't call kfree_skb() under spin_lock_irqsave()
dpaa2-switch: Fix memory leak in dpaa2_switch_acl_entry_add() and dpaa2_switch_acl_entry_remove()
ethernet: aeroflex: fix potential skb leak in greth_init_rings()
tipc: call tipc_lxc_xmit without holding node_read_lock
can: esd_usb: Allow REC and TEC to return to zero
can: can327: flush TX_work on ldisc .close()
can: slcan: fix freed work crash
can: af_can: fix NULL pointer dereference in can_rcv_filter
net: dsa: sja1105: fix memory leak in sja1105_setup_devlink_regions()
ipv4: Fix incorrect route flushing when table ID 0 is used
ipv4: Fix incorrect route flushing when source address is deleted
...
|
|
Test against MLX4_MAX_DESC_TXBBS only matters if the TX
bounce buffer is going to be used.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Wei Wang <weiwan@google.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
