summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2016-05-09can: ifi: Start NAPI poll on bus warning tooMarek Vasut
Start the NAPI polling in case the bus warning interrupt happens, since it is the poll function which checks and reports the warning. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Marc Kleine-Budde <mkl@pengutronix.de> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Oliver Hartkopp <socketcan@hartkopp.net> Cc: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2016-05-09can: gs_usb: modify the usb device table to use only the first usb interfaceMaximilian Schneider
Modified the USB device table to use only the first USB interface, as is the case with GS USB devices. This allows other GS USB compatible devices to be more flexible with their remaining interfaces. Signed-off-by: Maximilian Schneider <max@schneidersoft.net> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2016-05-09can: janz-ican3: error handling for CAL/CANopen firmwareAndreas Gröger
My patch of May 2015 was missing the changed handling of error indications. With CAL/CANopen firmware the NMTS-SlaveEventIndication must be used instead of CAN-EventIndication. An appropriate slave node must be configured to report the errors. In our department (about 15 development systems with Janz ICAN3- modules with firmware 1.48, my system also with firmware ICANOS 1.35) we use the driver with this patch for about one year: no known problems. Signed-off-by: Andreas Gröger <andreas24groeger@gmail.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2016-05-09can: fix handling of unmodifiable configuration optionsOliver Hartkopp
As described in 'can: m_can: tag current CAN FD controllers as non-ISO' (6cfda7fbebe) it is possible to define fixed configuration options by setting the according bit in 'ctrlmode' and clear it in 'ctrlmode_supported'. This leads to the incovenience that the fixed configuration bits can not be passed by netlink even when they have the correct values (e.g. non-ISO, FD). This patch fixes that issue and not only allows fixed set bit values to be set again but now requires(!) to provide these fixed values at configuration time. A valid CAN FD configuration consists of a nominal/arbitration bittiming, a data bittiming and a control mode with CAN_CTRLMODE_FD set - which is now enforced by a new can_validate() function. This fix additionally removed the inconsistency that was prohibiting the support of 'CANFD-only' controller drivers, like the RCar CAN FD. For this reason a new helper can_set_static_ctrlmode() has been introduced to provide a proper interface to handle static enabled CAN controller options. Reported-by: Ramesh Shanmugasundaram <ramesh.shanmugasundaram@bp.renesas.com> Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Reviewed-by: Ramesh Shanmugasundaram <ramesh.shanmugasundaram@bp.renesas.com> Cc: <stable@vger.kernel.org> # >= 3.18 Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2016-05-09can: mcp251x: Replace create_freezable_workqueue with alloc_workqueueAmitoj Kaur Chawla
Replace scheduled to be removed create_freezable_workqueue with alloc_workqueue. priv->wq should be explicitly set as freezable to ensure it is frozen in the suspend sequence and work items are drained so that no new work item starts execution until thawed. Thus, use of WQ_FREEZABLE flag here is required. WQ_MEM_RECLAIM flag has been set here to ensure forward progress regardless of memory pressure. The order of execution is not important so set @max_active as 0. Signed-off-by: Amitoj Kaur Chawla <amitoj1606@gmail.com> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2016-05-09can: sja1000: plx_pci: Add support for Marathon CAN-bus-PCIe cardNikita Edward Baruzdin
This patch adds support for the Marathon CAN-bus-PCIe card to the sja1000 driver. For more information see: http://can.marathon.ru/page/devices/can-bus-pcie Signed-off-by: Nikita Edward Baruzdin <nebaruzdin@gmail.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2016-05-09can: sja1000: Fix error location forwardingAlexander Gerasiov
According to SJA1000 documentation the location of error is available regardless of an error type. Therefore it should always be forwarded to SocketCAN. Signed-off-by: Nikita Edward Baruzdin <nebaruzdin@lvk.cs.msu.su> Signed-off-by: Alexander GQ Gerasiov <gq@cs.msu.su> Acked-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2016-05-09Merge 4.6-rc7 into tty-nextGreg Kroah-Hartman
We want the pty fixes in here as well so that patches can build on it. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-05-09Merge 4.6-rc7 into char-misc-testingGreg Kroah-Hartman
This resolves a merge issue with drivers/hv/ring_buffer.c Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-05-09Merge 4.6-rc7 into usb-nextGreg Kroah-Hartman
We want the USB fixes in here to resolve merge issues and make it easier for testing. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-05-09Merge tag 'usb-serial-4.6-rc7' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-next Johan writes: USB-serial fixes for v4.6-rc7 Here are some more new device ids. Signed-off-by: Johan Hovold <johan@kernel.org>
2016-05-09mfd: as3722: Use devm_mfd_add_devices and devm_regmap_add_irq_chipLaxman Dewangan
Use devm_mfd_add_devices() for adding MFD child devices and devm_regmap_add_irq_chip() for IRQ chip registration. This reduces the error code path and .remove callback for removing MFD child devices and deleting IRQ chip data. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-05-09mfd: twl4030-power: Remove driver path in file commentJavier Martinez Canillas
The driver's file path in the comment is wrong, so just remove it since these tends to get out of date and they serve very little purpose. Suggested-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-05-09mfd: smsc-ece1099: Remove unnecessarily remove callbackLaxman Dewangan
SMSC MFD driver does not add any MFD child devices via mfd_add_devices() and hence it is not required to call mfd_remove_devices() to remove MFD child devices. Remove the call of the API mfd_remove_devices() which will result as remove of .remove callback for driver. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Sourav Poddar <sourav.poddar@ti.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-05-09mfd: Use IS_ENABLED(CONFIG_FOO) instead of checking FOO || FOO_MODULEJavier Martinez Canillas
The IS_ENABLED() macro checks if a Kconfig symbol has been enabled either built-in or as a module, use that macro instead of open coding the same. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-05-09mfd: twl6040: Disable and unprepare clk32k in twl6040_power() error pathJavier Martinez Canillas
The clk32k clock is prepared and enabled in twl6040_power() but the clock is left enabled in case of an error while it should be disable/unprepared. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-05-09mfd: twl6040: Check clk_prepare_enable() return value in twl6040_power()Javier Martinez Canillas
The clk_prepare_enable() function can fail so check the return value and propagate the error in case of a failure. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-05-09mfd: tps6105x: Remove linux/regulator/driver.h includeMark Brown
This driver makes no use of linux/regulator/driver.h which should only be used by drivers implementing a regulator. Since it's unlikely to ever need anything from there remove the include. Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-05-09mfd: intel_quark_i2c_gpio: Remove CLK_IS_ROOTStephen Boyd
This flag is a no-op now (see commit 47b0eeb3dc8a "clk: Deprecate CLK_IS_ROOT", 2016-02-02) so remove it. Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-05-09mfd: intel-lpss: Remove CLK_IS_ROOTStephen Boyd
This flag is a no-op now (see commit 47b0eeb3dc8a "clk: Deprecate CLK_IS_ROOT", 2016-02-02) so remove it. Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-05-09mfd: intel-lpss: Save register context on suspendHeikki Krogerus
All configurations are lost and the registers will have default values when the hardware is suspended and resumed, so saving the private register space context on suspend, and restoring it on resume. Fixes: 4b45efe85263 (mfd: Add support for Intel Sunrisepoint LPSS devices) Cc: stable@vger.kernel.org # v4.3+ Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-05-09mfd: wm8400-core: Delete wm8400_reg_read()Dan Carpenter
There was a static checker warning in wm8400_reg_read() because we were returning u16 and that can't hold the negative error codes. The function isn't used, so let's just delete it. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-05-09mfd: arizona: Update device ordering to allow clean driver removalCharles Keepax
Since this commit: commit b9a8a271c38f ("mfd: make mfd_remove_devices() iterate in reverse order") The order in which the MFD children remove has been reversed, as our driver contains some dependencies between the devices we need to make some changes to ensure the driver unloads cleanly. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-05-09mfd: mt6397: IRQ domain should initialize before mfd_add_devices()Henry Chen
Some sub driver like RTC module need irq domain from parent to create irq mapping when driver initialize. so move mt6397_irq_init() before mfd_add_devices(). Acked-by: John Crispin <blogic@openwrt.org> Signed-off-by: Henry Chen <henryc.chen@mediatek.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-05-09net/mlx5e: make VXLAN support conditionalArnd Bergmann
VXLAN can be disabled at compile-time or it can be a loadable module while mlx5 is built-in, which leads to a link error: drivers/net/built-in.o: In function `mlx5e_create_netdev': ntb_netdev.c:(.text+0x106de4): undefined reference to `vxlan_get_rx_port' This avoids the link error and makes the vxlan code optional, like the other ethernet drivers do as well. Link: https://patchwork.ozlabs.org/patch/589296/ Fixes: b3f63c3d5e2c ("net/mlx5e: Add netdev support for VXLAN tunneling") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-09Revert "net/mlx5: Kconfig: Fix MLX5_EN/VXLAN build issue"Arnd Bergmann
This reverts commit 69976fb1045850a742deb9790ea49cbc6f497531. We cannot select VXLAN when IPv4 support is disabled, that just gives us additional build errors, including: warning: (MLX5_CORE_EN) selects VXLAN which has unmet direct dependencies (NETDEVICES && NET_CORE && INET) In file included from ../drivers/net/vxlan.c:36:0: include/net/udp_tunnel.h: In function 'udp_tunnel_handle_offloads': include/net/udp_tunnel.h:112:9: error: implicit declaration of function 'iptunnel_handle_offloads' [-Werror=implicit-function-declaration] return iptunnel_handle_offloads(skb, type); ^~~~~~~~~~~~~~~~~~~~~~~~ I'm sending a proper fix for the original bug in a separate patch. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-09sh_eth: reuse sh_eth_chip_reset()Sergei Shtylyov
All the chip_reset() methods repeat the code writing to the ARSTR register and delaying for 1 ms, so that we can reuse sh_eth_chip_reset() twice. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-09sh_eth: call sh_eth_tsu_write() from sh_eth_chip_reset_giga()Sergei Shtylyov
sh_eth_chip_reset_giga() doesn't really need to use direct iowrite32() when writing to the ARSTR register, it can use sh_eth_tsu_write() as all other chip_reset() methods. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-09pxa168_eth: mdiobus_scan() doesn't return NULL anymoreSergei Shtylyov
Now that mdiobus_scan() doesn't return NULL on failure anymore, this driver no longer needs to check for it... Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-09Merge branch 'for-upstream' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next Johan Hedberg says: ==================== pull request: bluetooth-next 2016-05-07 Here are a few more Bluetooth patches for the 4.7 kernel: - NULL pointer fix in hci_intel driver - New Intel Bluetooth controller id in btusb driver - Added device tree binding documentation for Marvel's bt-sd8xxx - Platform specific wakeup interrupt support for btmrvl driver Please let me know if there are any issues pulling. Thanks. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-09macsec: key identifier is 128 bits, not 64Sabrina Dubroca
The MACsec standard mentions a key identifier for each key, but doesn't specify anything about it, so I arbitrarily chose 64 bits. IEEE 802.1X-2010 specifies MKA (MACsec Key Agreement), and defines the key identifier to be 128 bits (96 bits "member identifier" + 32 bits "key number"). Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-09irqchip: add nps Internal and external irqchipsNoam Camus
Adding EZchip NPS400 support. Internal interrupts are handled by Multi Thread Manager (MTM) Once interrupt is serviced MTM is acked for deactivating the interrupt. External interrupts are handled by MTM as well as at Global Interrupt Controller (GIC) e.g. serial and network devices. Signed-off-by: Noam Camus <noamc@ezchip.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Acked-by: Vineet Gupta <vgupta@synopsys.com> Acked-by: Jason Cooper <jason@lakedaemon.net> Cc: Thomas Gleixner <tglx@linutronix.de>
2016-05-09clocksource: Add NPS400 timers driverNoam Camus
Add internal tick generator which is shared by all cores. Each cluster of cores view it through dedicated address. This is used for SMP system where all CPUs synced by same clock source. Signed-off-by: Noam Camus <noamc@ezchip.com> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: John Stultz <john.stultz@linaro.org> Acked-by: Vineet Gupta <vgupta@synopsys.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2016-05-09ifb: support more featuresEric Dumazet
When using ifb+netem on ingress on SIT/IPIP/GRE traffic, GRO packets are not properly processed. Segmentation should not be forced, since ifb is already adding quite a performance hit. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-08ISDN: eicon: replace custom hex_asc_lo() / hex_pack_byte()Andy Shevchenko
Instead of custom approach re-use generic helpers to convert byte to hex format. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-09Merge tag 'v4.6-rc7' into drm-nextDave Airlie
Merge this back as we've built up a fair few conflicts, and I have some newer trees to pull in.
2016-05-08macvtap: segmented packet is consumedEric Dumazet
If GSO packet is segmented and its segments are properly queued, we call consume_skb() instead of kfree_skb() to be drop monitor friendly. Fixes: 3e4f8b7873709 ("macvtap: Perform GSO on forwarding path.") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Vlad Yasevich <vyasevic@redhat.com> Reviewed-by: Shmulik Ladkani <shmulik.ladkani@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-08qede: uninitialized variable in qede_start_xmit()Dan Carpenter
"data_split" was never set to false. It's just uninitialized. Fixes: 2950219d87b0 ('qede: Add basic network device support') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-09drm/amdgpu: fix build on aarch64.Dave Airlie
Same fix went in previously for some other files. Signed-off-by: Dave Airlie <airlied@redhat.com>
2016-05-09Merge branch 'msm-next' of git://people.freedesktop.org/~robclark/linux into ↵Dave Airlie
drm-next Mostly cleanups, fixes, and 'struct fence' conversion this time around, with one reservation patch which is a-b Sumit (which the fence conversion patches depend on). * 'msm-next' of git://people.freedesktop.org/~robclark/linux: (25 commits) drm/msm: Drop load/unload drm_driver ops drm/msm: Centralize connector registration/unregistration drm/msm/hdmi: Prevent gpio_free related kernel warnings drm/msm: print offender task name on hangcheck recovery drm/msm: fix leak in failed submit path drm/msm: de-indent submit_create() drm/msm: drop return from gpu->submit() drm/msm/mdp4: Don't manage DSI PLL regulators in MDP driver drm/msm/edp: Drop regulator_set_voltage call drm/msm/dsi: Fix regulator API abuse drm/msm: Move call to PTR_ERR_OR_ZERO after reassignment drm/msm/mdp: Add support for more RGBX formats drm: msm: remove unused variable drm/msm: fix ->last_fence() after recover drm/msm: 'struct fence' conversion drm/msm: remove fence_cbs drm/msm: introduce msm_fence_context drm/msm: split locking and pinning BO's drm/msm/gpu: simplify tracking in-flight bo's drm/msm: split out timeout_to_jiffies helper ...
2016-05-09Merge tag 'topic/drm-misc-2016-05-08' of ↵Dave Airlie
git://anongit.freedesktop.org/drm-intel into drm-next Refcounting is hard, so here's a quick pull request with the one-liner to fix up i915. Otherwise just a few other small things I picked up. Plus the regression fix from Marten for rmfb behaviour that lingered around forever since no testers. Feel free to cherry-pick that over to drm-fixes, but given that there's not many who seemed to have cared, meh. * tag 'topic/drm-misc-2016-05-08' of git://anongit.freedesktop.org/drm-intel: drm/i915: Correctly refcount connectors in hw state readou drm/panel: Flesh out kerneldoc drm: Add gpu.tmpl docbook to MAINTAINERS entry drm/core: Do not preserve framebuffer on rmfb, v4. drm: Fix up markup fumble drm/fb_helper: Fix a few typos
2016-05-08clk: rockchip: fix the rk3399 sdmmc sample / drv nameDouglas Anderson
The rk3399 clock table had a simple typo in it, calling the SDMMC sample and drive clocks by the wrong name. Fix this minor typo. Signed-off-by: Douglas Anderson <dianders@chromium.org> Tested-by: Brian Norris <briannorris@chromium.org> Acked-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2016-05-08mailbox: Fix devm_ioremap_resource error detection codeAmitoj Kaur Chawla
devm_ioremap_resource returns an ERR_PTR value, not NULL, on failure. The Coccinelle semantic patch used to make this change is as follows: @@ expression e,e1; statement S; @@ *e = devm_ioremap_resource(...); if (!e1) S Signed-off-by: Amitoj Kaur Chawla <amitoj1606@gmail.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2016-05-08drm/msm: Drop load/unload drm_driver opsArchit Taneja
The load/unload drm_driver ops are deprecated. They should be removed as they result in creation of devices visible to userspace even before the drm_device is registered. Drop these ops and use drm_dev_alloc/register and drm_dev_unregister/unref to explicitly create and destroy the drm device in the msm platform driver's bind and unbind ops. With this in use, the drm connectors are only registered once the drm_device is registered. It also fixes the issue of stray debugfs files after the msm module is removed. With this, all the debugfs files are removed, and allows successive module insertions/removals. Signed-off-by: Archit Taneja <architt@codeaurora.org>
2016-05-08drm/msm: Centralize connector registration/unregistrationArchit Taneja
Move the drm_connector registration from the encoder(HDMI/DSI etc) drivers to the msm platform driver. This will simplify the task of ensuring that the connectors are registered only after the drm_device itself is registered. The connectors' destroy ops are made to use kzalloc instead of devm_kzalloc to ensure that that the connectors can be successfully unregistered when the msm driver module is removed. The memory for the connectors is unallocated when drm_mode_config_cleanup() is called during either during an error or during driver remove. Signed-off-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2016-05-08drm/msm/hdmi: Prevent gpio_free related kernel warningsArchit Taneja
Calling the legacy gpio_free on an invalid GPIO (a GPIO numbered -1) results in kernel warnings. This causes a lot of backtraces when we try to unload the drm/msm module. Call gpio_free only on valid GPIOs. Signed-off-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2016-05-08drm/msm: print offender task name on hangcheck recoveryRob Clark
Track the pid per submit, so we can print the name of the task which submitted the batch that caused the gpu to hang. Signed-off-by: Rob Clark <robdclark@gmail.com>
2016-05-08drm/msm: fix leak in failed submit pathRob Clark
Signed-off-by: Rob Clark <robdclark@gmail.com>
2016-05-08drm/msm: de-indent submit_create()Rob Clark
Signed-off-by: Rob Clark <robdclark@gmail.com>
2016-05-08drm/msm: drop return from gpu->submit()Rob Clark
At this point, there is nothing left to fail. And submit already has a fence assigned and is added to the submit_list. Any problems from here on out are asynchronous (ie. hangcheck/recovery). Signed-off-by: Rob Clark <robdclark@gmail.com>
generated by cgit (git 2.34.1) at 2025-09-20 21:57:41 +0000