summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2020-01-21net: hns3: set VF's default reset_type to HNAE3_NONE_RESETHuazhong Tan
reset_type means what kind of reset the driver is handling now, so after initializing or reset, the reset_type of VF should be set to HNAE3_NONE_RESET, otherwise, this unknown default value may be a little misleading when the device is running. Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-21net: hns3: do not reuse pfmemalloc pagesYunsheng Lin
HNS3 driver allocates pages for DMA with dev_alloc_pages(), which calls alloc_pages_node() with the __GFP_MEMALLOC flag. So, in case of OOM condition, HNS3 can get pages with pfmemalloc flag set. So do not reuse the pages with pfmemalloc flag set because those pages are reserved for special cases, such as low memory case. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-21net: hns3: limit the error logging in the hns3_clean_tx_ring()Yunsheng Lin
The error log printed by netdev_err() in the hns3_clean_tx_ring() may spam the kernel log. This patch uses hns3_rl_err() to ratelimit the error log in the hns3_clean_tx_ring(). Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-21wan/hdlc_x25: fix skb handlingMartin Schiller
o call skb_reset_network_header() before hdlc->xmit() o change skb proto to HDLC (0x0019) before hdlc->xmit() o call dev_queue_xmit_nit() before hdlc->xmit() This changes make it possible to trace (tcpdump) outgoing layer2 (ETH_P_HDLC) packets Additionally call skb_reset_network_header() after each skb_push() / skb_pull(). Signed-off-by: Martin Schiller <ms@dev.tdt.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-21wan/hdlc_x25: make lapb params configurableMartin Schiller
This enables you to configure mode (DTE/DCE), Modulo, Window, T1, T2, N2 via sethdlc (which needs to be patched as well). Signed-off-by: Martin Schiller <ms@dev.tdt.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-21net: convert suitable network drivers to use phy_do_ioctlHeiner Kallweit
Convert suitable network drivers to use phy_do_ioctl. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-21net: phy: add new version of phy_do_ioctlHeiner Kallweit
Add a new version of phy_do_ioctl that doesn't check whether net_device is running. It will typically be used if suitable drivers attach the PHY in probe already. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-21net: phy: rename phy_do_ioctl to phy_do_ioctl_runningHeiner Kallweit
We just added phy_do_ioctl, but it turned out that we need another version of this function that doesn't check whether net_device is running. So rename phy_do_ioctl to phy_do_ioctl_running. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-21net: hns3: replace snprintf with scnprintf in hns3_update_stringsChen Zhou
snprintf returns the number of bytes that would be written, which may be greater than the the actual length to be written. Here use extra code to handle this. scnprintf returns the number of bytes that was actually written, just use scnprintf to simplify the code. Signed-off-by: Chen Zhou <chenzhou10@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-21net: hns3: replace snprintf with scnprintf in hns3_dbg_cmd_readChen Zhou
The return value of snprintf may be greater than the size of HNS3_DBG_READ_LEN, use scnprintf instead in hns3_dbg_cmd_read. Signed-off-by: Chen Zhou <chenzhou10@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-21net: usb: lan78xx: Add .ndo_features_checkJames Hughes
As reported by Eric Dumazet, there are still some outstanding cases where the driver does not handle TSO correctly when skb's are over a certain size. Most cases have been fixed, this patch should ensure that forwarded SKB's that are greater than MAX_SINGLE_PACKET_SIZE - TX_OVERHEAD are software segmented and handled correctly. Signed-off-by: James Hughes <james.hughes@raspberrypi.org> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-21drivers: soc: xilinx: Use mailbox IPI callbackTejas Patel
Add support for init suspend callback through mailbox IPI callback. Signed-off-by: Tejas Patel <tejas.patel@xilinx.com> Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-01-21dmaengine: Move dma_get_{,any_}slave_channel() to private dmaengine.hGeert Uytterhoeven
The functions dma_get_slave_channel() and dma_get_any_slave_channel() are called from DMA engine drivers only. Hence move their declarations from the public header file <linux/dmaengine.h> to the private header file drivers/dma/dmaengine.h. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20200121093311.28639-4-geert+renesas@glider.be Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-01-21dmaengine: Remove dma_device_satisfies_mask() wrapperGeert Uytterhoeven
Commit aa1e6f1a385eb2b0 ("dmaengine: kill struct dma_client and supporting infrastructure") removed the last user of the dma_device_satisfies_mask() wrapper. Remove the wrapper, and rename __dma_device_satisfies_mask() to dma_device_satisfies_mask(), to get rid of one more function starting with a double underscore. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20200121093311.28639-2-geert+renesas@glider.be Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-01-21Merge tag 'rds-odp-for-5.5' of ↵David S. Miller
https://git.kernel.org/pub/scm/linux/kernel/git/leon/linux-rdma Leon Romanovsky says: ==================== Use ODP MRs for kernel ULPs The following series extends MR creation routines to allow creation of user MRs through kernel ULPs as a proxy. The immediate use case is to allow RDS to work over FS-DAX, which requires ODP (on-demand-paging) MRs to be created and such MRs were not possible to create prior this series. The first part of this patchset extends RDMA to have special verb ib_reg_user_mr(). The common use case that uses this function is a userspace application that allocates memory for HCA access but the responsibility to register the memory at the HCA is on an kernel ULP. This ULP acts as an agent for the userspace application. The second part provides advise MR functionality for ULPs. This is integral part of ODP flows and used to trigger pagefaults in advance to prepare memory before running working set. The third part is actual user of those in-kernel APIs. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-21dmaengine: zynqmp_dma: fix burst length configurationMatthias Fend
Since the dma engine expects the burst length register content as power of 2 value, the burst length needs to be converted first. Additionally add a burst length range check to avoid corrupting unrelated register bits. Signed-off-by: Matthias Fend <matthias.fend@wolfvision.net> Link: https://lore.kernel.org/r/20200115102249.24398-1-matthias.fend@wolfvision.net Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-01-21dmaengine: sun4i: Add support for cyclic requests with dedicated DMAStefan Mavrodiev
Currently the cyclic transfers can be used only with normal DMAs. They can be used by pcm_dmaengine module, which is required for implementing sound with sun4i-hdmi encoder. This is so because the controller can accept audio only from a dedicated DMA. This patch enables them, following the existing style for the scatter/gather type transfers. Signed-off-by: Stefan Mavrodiev <stefan@olimex.com> Acked-by: Maxime Ripard <mripard@kernel.org> Link: https://lore.kernel.org/r/20200110141140.28527-2-stefan@olimex.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-01-21dmaengine: fsl-qdma: fix duplicated argument to &&Chen Zhou
There is duplicated argument to && in function fsl_qdma_free_chan_resources, which looks like a typo, pointer fsl_queue->desc_pool also needs NULL check, fix it. Detected with coccinelle. Fixes: b092529e0aa0 ("dmaengine: fsl-qdma: Add qDMA controller driver for Layerscape SoCs") Signed-off-by: Chen Zhou <chenzhou10@huawei.com> Reviewed-by: Peng Ma <peng.ma@nxp.com> Tested-by: Peng Ma <peng.ma@nxp.com> Link: https://lore.kernel.org/r/20200120125843.34398-1-chenzhou10@huawei.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-01-21dmaengine: ti: k3-psil: make symbols staticPeter Ujfalusi
Fixe the following warnings by making these static drivers/dma/ti/k3-psil-j721e.c:62:16: warning: symbol 'j721e_src_ep_map' was not declared. Should it be static? drivers/dma/ti/k3-psil-j721e.c:172:16: warning: symbol 'j721e_dst_ep_map' was not declared. Should it be static? drivers/dma/ti/k3-psil-j721e.c:216:20: warning: symbol 'j721e_ep_map' was not declared. Should it be static? CC drivers/dma/ti/k3-psil-j721e.o drivers/dma/ti/k3-psil-am654.c:52:16: warning: symbol 'am654_src_ep_map' was not declared. Should it be static? drivers/dma/ti/k3-psil-am654.c:127:16: warning: symbol 'am654_dst_ep_map' was not declared. Should it be static? drivers/dma/ti/k3-psil-am654.c:169:20: warning: symbol 'am654_ep_map' was not declared. Should it be static? Reported-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Link: https://lore.kernel.org/r/20200121070104.4393-1-peter.ujfalusi@ti.com [vkoul: updated patch title] Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-01-21drm/i915: Align engine->uabi_class/instance with i915_drm.hTvrtko Ursulin
In our ABI we have defined I915_ENGINE_CLASS_INVALID_NONE and I915_ENGINE_CLASS_INVALID_VIRTUAL as negative values which creates implicit coupling with type widths used in, also ABI, struct i915_engine_class_instance. One place where we export engine->uabi_class I915_ENGINE_CLASS_INVALID_VIRTUAL is from our our tracepoints. Because the type of the former is u8 in contrast to u16 defined in the ABI, 254 will be returned instead of 65534 which userspace would legitimately expect. Another place is I915_CONTEXT_PARAM_ENGINES. Therefore we need to align the type used to store engine ABI class and instance. v2: * Update the commit message mentioning get_engines and cc stable. (Chris) Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Fixes: 6d06779e8672 ("drm/i915: Load balancing across a virtual engine") Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: <stable@vger.kernel.org> # v5.3+ Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20200116134508.25211-1-tvrtko.ursulin@linux.intel.com (cherry picked from commit 0b3bd0cdc329a1e2e00995cffd61aacf58c87cb4) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2020-01-21drm/i915/userptr: fix size calculationMatthew Auld
If we create a rather large userptr object(e.g 1ULL << 32) we might shift past the type-width of num_pages: (int)num_pages << PAGE_SHIFT, resulting in a totally bogus sg_table, which fortunately will eventually manifest as: gen8_ppgtt_insert_huge:463 GEM_BUG_ON(iter->sg->length < page_size) kernel BUG at drivers/gpu/drm/i915/gt/gen8_ppgtt.c:463! v2: more unsigned long prefer I915_GTT_PAGE_SIZE Fixes: 5cc9ed4b9a7a ("drm/i915: Introduce mapping of user pages into video memory (userptr) ioctl") Signed-off-by: Matthew Auld <matthew.auld@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20200117132413.1170563-2-matthew.auld@intel.com (cherry picked from commit 8e78871bc1e5efec22c950d3fd24ddb63d4ff28a) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2020-01-21dmaengine: ti: k3-udma: Add glue layer for non DMAengine usersGrygorii Strashko
Certain users can not use right now the DMAengine API due to missing features in the core. Prime example is Networking. These users can use the glue layer interface to avoid misuse of DMAengine API and when the core gains the needed features they can be converted to use generic API. The most prominent features the glue layer clients are depending on: - most PSI-L native peripheral use extra rflow ranges on a receive channel and depending on the peripheral's configuration packets from a single free descriptor ring is going to be received to different receive ring - it is also possible to have different free descriptor rings per rflow and an rflow can also support 4 additional free descriptor ring based on the size of the incoming packet - out of order completion of descriptors on a channel - when we have several queues to handle different priority packets the descriptors will be completed 'out-of-order' - the notion of prep_slave_sg is not matching with what the streaming type of operation is demanding for networking - Streaming type of operation - Ability to fill the free descriptor ring with descriptors in anticipation of incoming traffic and when a packet arrives UDMAP will form a packet and gives it to the client driver - the descriptors are not backed with exact size data buffers as we don't know the size of the packet we will receive, but as a generic pool of buffers to be used by the receive channel - NAPI type of operation (polling instead of interrupt driven transfer) - without this we can not sustain gigabit speeds and we need to support NAPI - not to limit this to networking, but other high performance operations Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Tested-by: Keerthy <j-keerthy@ti.com> Link: https://lore.kernel.org/r/20191223110458.30766-12-peter.ujfalusi@ti.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-01-21dmaengine: ti: New driver for K3 UDMAPeter Ujfalusi
Split patch for review containing: defines, structs, io and low level functions and interrupt callbacks. DMA driver for Texas Instruments K3 NAVSS Unified DMA – Peripheral Root Complex (UDMA-P) The UDMA-P is intended to perform similar (but significantly upgraded) functions as the packet-oriented DMA used on previous SoC devices. The UDMA-P module supports the transmission and reception of various packet types. The UDMA-P is architected to facilitate the segmentation and reassembly of SoC DMA data structure compliant packets to/from smaller data blocks that are natively compatible with the specific requirements of each connected peripheral. Multiple Tx and Rx channels are provided within the DMA which allow multiple segmentation or reassembly operations to be ongoing. The DMA controller maintains state information for each of the channels which allows packet segmentation and reassembly operations to be time division multiplexed between channels in order to share the underlying DMA hardware. An external DMA scheduler is used to control the ordering and rate at which this multiplexing occurs for Transmit operations. The ordering and rate of Receive operations is indirectly controlled by the order in which blocks are pushed into the DMA on the Rx PSI-L interface. The UDMA-P also supports acting as both a UTC and UDMA-C for its internal channels. Channels in the UDMA-P can be configured to be either Packet-Based or Third-Party channels on a channel by channel basis. The initial driver supports: - MEM_TO_MEM (TR mode) - DEV_TO_MEM (Packet / TR mode) - MEM_TO_DEV (Packet / TR mode) - Cyclic (Packet / TR mode) - Metadata for descriptors Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Tested-by: Keerthy <j-keerthy@ti.com> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> Link: https://lore.kernel.org/r/20191223110458.30766-11-peter.ujfalusi@ti.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-01-21dmaengine: ti: k3 PSI-L remote endpoint configurationPeter Ujfalusi
In K3 architecture the DMA operates within threads. One end of the thread is UDMAP, the other is on the peripheral side. The UDMAP channel configuration depends on the needs of the remote endpoint and it can be differ from peripheral to peripheral. This patch adds database for am654 and j721e and small API to fetch the PSI-L endpoint configuration from the database which should only used by the DMA driver(s). Another API is added for native peripherals to give possibility to pass new configuration for the threads they are using, which is needed to be able to handle changes caused by different firmware loaded for the peripheral for example. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Tested-by: Keerthy <j-keerthy@ti.com> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> Link: https://lore.kernel.org/r/20191223110458.30766-9-peter.ujfalusi@ti.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-01-21dmaengine: Add support for reporting DMA cached data amountPeter Ujfalusi
A DMA hardware can have big cache or FIFO and the amount of data sitting in the DMA fabric can be an interest for the clients. For example in audio we want to know the delay in the data flow and in case the DMA have significantly large FIFO/cache, it can affect the latenc/delay Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Reviewed-by: Tero Kristo <t-kristo@ti.com> Tested-by: Keerthy <j-keerthy@ti.com> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> Link: https://lore.kernel.org/r/20191223110458.30766-6-peter.ujfalusi@ti.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-01-21dmaengine: Add metadata_ops for dma_async_tx_descriptorPeter Ujfalusi
The metadata is best described as side band data or parameters traveling alongside the data DMAd by the DMA engine. It is data which is understood by the peripheral and the peripheral driver only, the DMA engine see it only as data block and it is not interpreting it in any way. The metadata can be different per descriptor as it is a parameter for the data being transferred. If the DMA supports per descriptor metadata it can implement the attach, get_ptr/set_len callbacks. Client drivers must only use either attach or get_ptr/set_len to avoid misconfiguration. Client driver can check if a given metadata mode is supported by the channel during probe time with dmaengine_is_metadata_mode_supported(chan, DESC_METADATA_CLIENT); dmaengine_is_metadata_mode_supported(chan, DESC_METADATA_ENGINE); and based on this information can use either mode. Wrappers are also added for the metadata_ops. To be used in DESC_METADATA_CLIENT mode: dmaengine_desc_attach_metadata() To be used in DESC_METADATA_ENGINE mode: dmaengine_desc_get_metadata_ptr() dmaengine_desc_set_metadata_len() Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Reviewed-by: Tero Kristo <t-kristo@ti.com> Tested-by: Keerthy <j-keerthy@ti.com> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> Link: https://lore.kernel.org/r/20191223110458.30766-5-peter.ujfalusi@ti.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-01-21Merge TI ringacc driver from SantoshVinod Koul
This is for dependency of new TI ringacc dmaengine drivers Merge tag 'drivers_soc_for_5.6' into topic/ti SOC: TI Keystone Ring Accelerator driver The Ring Accelerator (RINGACC or RA) provides hardware acceleration to enable straightforward passing of work between a producer and a consumer. There is one RINGACC module per NAVSS on TI AM65x SoCs. Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-01-21scsi: RDMA/isert: Fix a recently introduced regression related to logoutBart Van Assche
iscsit_close_connection() calls isert_wait_conn(). Due to commit e9d3009cb936 both functions call target_wait_for_sess_cmds() although that last function should be called only once. Fix this by removing the target_wait_for_sess_cmds() call from isert_wait_conn() and by only calling isert_wait_conn() after target_wait_for_sess_cmds(). Fixes: e9d3009cb936 ("scsi: target: iscsi: Wait for all commands to finish before freeing a session"). Link: https://lore.kernel.org/r/20200116044737.19507-1-bvanassche@acm.org Reported-by: Rahul Kundu <rahul.kundu@chelsio.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Tested-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Acked-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-01-20scsi: fnic: do not queue commands during fwresetHannes Reinecke
When a link is going down the driver will be calling fnic_cleanup_io(), which will traverse all commands and calling 'done' for each found command. While the traversal is handled under the host_lock, calling 'done' happens after the host_lock is being dropped. As fnic_queuecommand_lck() is being called with the host_lock held, it might well be that it will pick the command being selected for abortion from the above routine and enqueue it for sending, but then 'done' is being called on that very command from the above routine. Which of course confuses the hell out of the scsi midlayer. So fix this by not queueing commands when fnic_cleanup_io is active. Link: https://lore.kernel.org/r/20200116102053.62755-1-hare@suse.de Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-01-20Input: ads7846 - use new `delay` structure for SPI transfer delaysAlexandru Ardelean
In a recent change to the SPI subsystem [1], a new `delay` struct was added to replace the `delay_usecs`. This change replaces the current `delay_usecs` with `delay` for this driver. The `spi_transfer_delay_exec()` function [in the SPI framework] makes sure that both `delay_usecs` & `delay` are used (in this order to preserve backwards compatibility). [1] commit bebcfd272df6485 ("spi: introduce `delay` field for `spi_transfer` + spi_transfer_delay_exec()") Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Link: https://lore.kernel.org/r/20191210141103.15910-1-alexandru.ardelean@analog.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-01-20Input: pm8xxx-vib - fix handling of separate enable registerStephan Gerhold
Setting the vibrator enable_mask is not implemented correctly: For regmap_update_bits(map, reg, mask, val) we give in either regs->enable_mask or 0 (= no-op) as mask and "val" as value. But "val" actually refers to the vibrator voltage control register, which has nothing to do with the enable_mask. So we usually end up doing nothing when we really wanted to enable the vibrator. We want to set or clear the enable_mask (to enable/disable the vibrator). Therefore, change the call to always modify the enable_mask and set the bits only if we want to enable the vibrator. Fixes: d4c7c5c96c92 ("Input: pm8xxx-vib - handle separate enable register") Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Link: https://lore.kernel.org/r/20200114183442.45720-1-stephan@gerhold.net Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-01-20scsi: hisi_sas: Rename hisi_sas_cq.pci_irq_maskJohn Garry
In future we will want to use hisi_sas_cq.pci_irq_mask for non-pci interrupt masks, so rename to be more general. Link: https://lore.kernel.org/r/1579522957-4393-7-git-send-email-john.garry@huawei.com Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-01-20scsi: hisi_sas: Add prints for v3 hw interrupt converge and automatic affinityLuo Jiaxing
Add prints to inform the user of enabled features. Link: https://lore.kernel.org/r/1579522957-4393-6-git-send-email-john.garry@huawei.com Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-01-20scsi: hisi_sas: Modify the file permissions of trigger_dump to write onlyLuo Jiaxing
The trigger_dump file is only used to manually trigger the dump, and did not provide a read callback function for it, so its file permission setting to 600 is wrong,and should be changed to 200. Link: https://lore.kernel.org/r/1579522957-4393-5-git-send-email-john.garry@huawei.com Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-01-20scsi: hisi_sas: Replace magic number when handle channel interruptLuo Jiaxing
We use magic number as offset and mask when handle channel interrupt, so use macro to replace it. Link: https://lore.kernel.org/r/1579522957-4393-4-git-send-email-john.garry@huawei.com Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-01-20scsi: hisi_sas: replace spin_lock_irqsave/spin_unlock_restore with ↵Xiang Chen
spin_lock/spin_unlock After changing tasklet to workqueue or threaded irq, some critical resources are only used on threads (not in interrupt or bottom half of interrupt), so replace spin_lock_irqsave/spin_unlock_restore with spin_lock/spin_unlock to protect those critical resources. Link: https://lore.kernel.org/r/1579522957-4393-3-git-send-email-john.garry@huawei.com Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-01-20scsi: hisi_sas: use threaded irq to process CQ interruptsXiang Chen
Currently IRQ_EFFECTIVE_AFF_MASK is enabled for ARM_GIC and ARM_GIC3, so it only allows a single target CPU in the affinity mask to process interrupts and also interrupt thread, and the performance of using threaded irq is almost the same as tasklet. But if the config is not enabled, the interrupt thread will be allowed all the CPUs in the affinity mask. At that situation it improves the performance (about 20%). Note: IRQ_EFFECTIVE_AFF_MASK is configured differently for different architecture chip, and it seems to be better to make it be configured easily. Link: https://lore.kernel.org/r/1579522957-4393-2-git-send-email-john.garry@huawei.com Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-01-20scsi: ufs: Use UFS device indicated maximum LU numberBean Huo
According to Jedec standard UFS 3.0 and UFS 2.1 Spec, Maximum number of logical units supported by the UFS device is indicated by parameter bMaxNumberLU in Geometry Descriptor. This patch is to delete current hard code macro definition of UFS_UPIU_MAX_GENERAL_LUN, and switch to use device indicated number instead. Link: https://lore.kernel.org/r/20200120130820.1737-9-huobean@gmail.com Reviewed-by: Asutosh Das <asutoshd@codeaurora.org> Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com> Signed-off-by: Bean Huo <beanhuo@micron.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-01-20scsi: ufs: Add max_lu_supported in struct ufs_dev_infoBean Huo
Add one new parameter max_lu_supported in struct ufs_dev_info, which will be used to express exactly how many general LUs being supported by UFS device, and initialize it during booting stage. This patch also adds a new function ufshcd_device_geo_params_init() for initialization of UFS device geometry descriptor related parameters. Link: https://lore.kernel.org/r/20200120130820.1737-8-huobean@gmail.com Reviewed-by: Asutosh Das <asutoshd@codeaurora.org> Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com> Signed-off-by: Bean Huo <beanhuo@micron.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-01-20scsi: ufs: Delete is_init_prefetch from struct ufs_hbaBean Huo
Without variable is_init_prefetch, the current logic can guarantee ufshcd_init_icc_levels() will execute only once, delete it now. Link: https://lore.kernel.org/r/20200120130820.1737-7-huobean@gmail.com Reviewed-by: Asutosh Das <asutoshd@codeaurora.org> Signed-off-by: Bean Huo <beanhuo@micron.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-01-20scsi: ufs: Inline two functions into their callersBean Huo
Delete ufshcd_read_power_desc() and ufshcd_read_device_desc(), directly inline ufshcd_read_desc() into its callers. Link: https://lore.kernel.org/r/20200120130820.1737-6-huobean@gmail.com Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com> Reviewed-by: Asutosh Das <asutoshd@codeaurora.org> Signed-off-by: Bean Huo <beanhuo@micron.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-01-20scsi: ufs: Move ufshcd_get_max_pwr_mode() to ufshcd_device_params_init()Bean Huo
ufshcd_get_max_pwr_mode() only need to be called once while booting, take it out from ufshcd_probe_hba() and inline into ufshcd_device_params_init(). Link: https://lore.kernel.org/r/20200120130820.1737-5-huobean@gmail.com Reviewed-by: Stanley Chu <stanley.chu@mediatek.com> Reviewed-by: Asutosh Das <asutoshd@codeaurora.org> Signed-off-by: Bean Huo <beanhuo@micron.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-01-20scsi: ufs: Split ufshcd_probe_hba() based on its called flowBean Huo
This patch has two major non-functionality changes: 1. Take scanning host if-statement out from ufshcd_probe_hba(), and move into a new added function ufshcd_add_lus(). In this new function ufshcd_add_lus(), the main functionalitis include: ICC initialization, add well-known LUs, devfreq initialization, UFS bsg probe and scsi host scan. The reason for this change is that these functionalities only being called during booting stage flow ufshcd_init()->ufshcd_async_scan(). In the processes of error handling and power management ufshcd_suspend(), ufshcd_resume(), ufshcd_probe_hba() being called, but these functionalitis above metioned are not hit. 2. Move context of initialization of parameters associated with the UFS device to a new added function ufshcd_device_params_init(). The reason of this change is that all of these parameters are used by driver, but only need to be initialized once when booting. Combine them into an integral function, make them easier maintain. Link: https://lore.kernel.org/r/20200120130820.1737-4-huobean@gmail.com Reviewed-by: Asutosh Das <asutoshd@codeaurora.org> Signed-off-by: Bean Huo <beanhuo@micron.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-01-20scsi: ufs: Delete struct ufs_dev_descBean Huo
In consideration of UFS host driver uses parameters of struct ufs_dev_desc, move its parameters to struct ufs_dev_info, delete struct ufs_dev_desc. Link: https://lore.kernel.org/r/20200120130820.1737-3-huobean@gmail.com Reviewed-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Asutosh Das <asutoshd@codeaurora.org> Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com> Reviewed-by: Stanley Chu <stanley.chu@mediatek.com> Signed-off-by: Bean Huo <beanhuo@micron.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-01-20scsi: ufs: Fix ufshcd_probe_hba() reture value in case ↵Bean Huo
ufshcd_scsi_add_wlus() fails A non-zero error value likely being returned by ufshcd_scsi_add_wlus() in case of failure of adding the WLs, but ufshcd_probe_hba() doesn't use this value, and doesn't report this failure to upper caller. This patch is to fix this issue. Fixes: 2a8fa600445c ("ufs: manually add well known logical units") Link: https://lore.kernel.org/r/20200120130820.1737-2-huobean@gmail.com Reviewed-by: Asutosh Das <asutoshd@codeaurora.org> Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com> Reviewed-by: Stanley Chu <stanley.chu@mediatek.com> Signed-off-by: Bean Huo <beanhuo@micron.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-01-20scsi: ufs-mediatek: enable low-power mode for hibern8 stateStanley Chu
In MediaTek Chipsets, UniPro link and ufshci can enter proprietary low-power mode while link is in hibern8 state. Link: https://lore.kernel.org/r/20200117035108.19699-4-stanley.chu@mediatek.com Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com> Reviewed-by: Asutosh Das <asutoshd@codeaurora.org> Signed-off-by: Stanley Chu <stanley.chu@mediatek.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-01-20scsi: ufs: export some functions for vendor usageStanley Chu
Export below functions for vendor usage: int ufshcd_hba_enable(struct ufs_hba *hba); int ufshcd_make_hba_operational(struct ufs_hba *hba); int ufshcd_uic_hibern8_exit(struct ufs_hba *hba); Link: https://lore.kernel.org/r/20200117035108.19699-3-stanley.chu@mediatek.com Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com> Reviewed-by: Asutosh Das <asutoshd@codeaurora.org> Signed-off-by: Stanley Chu <stanley.chu@mediatek.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-01-20scsi: ufs-mediatek: add dbg_register_dump implementationStanley Chu
Add dbg_register_dump variant vendor implementation in MediaTek UFS driver. Link: https://lore.kernel.org/r/20200117035108.19699-2-stanley.chu@mediatek.com Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com> Signed-off-by: Stanley Chu <stanley.chu@mediatek.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-01-21drm/exynos: Rename Exynos to lowercaseKrzysztof Kozlowski
Fix up inconsistent usage of upper and lowercase letters in "Exynos" name. "EXYNOS" is not an abbreviation but a regular trademarked name. Therefore it should be written with lowercase letters starting with capital letter. The lowercase "Exynos" name is promoted by its manufacturer Samsung Electronics Co., Ltd., in advertisement materials and on website. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2020-01-21drm/exynos: change callback namesInki Dae
This patch changes Exynos specific 'disable' and 'enable' callback names to 'atomic_disable/enable' for the consistency. Signed-off-by: Inki Dae <inki.dae@samsung.com>
generated by cgit (git 2.34.1) at 2025-09-23 21:28:32 +0000