summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2020-02-27net: rmnet: fix bridge mode bugsTaehee Yoo
In order to attach a bridge interface to the rmnet interface, "master" operation is used. (e.g. ip link set dummy1 master rmnet0) But, in the rmnet_add_bridge(), which is a callback of ->ndo_add_slave() doesn't register lower interface. So, ->ndo_del_slave() doesn't work. There are other problems too. 1. It couldn't detect circular upper/lower interface relationship. 2. It couldn't prevent stack overflow because of too deep depth of upper/lower interface 3. It doesn't check the number of lower interfaces. 4. Panics because of several reasons. The root problem of these issues is actually the same. So, in this patch, these all problems will be fixed. Test commands: modprobe rmnet ip link add dummy0 type dummy ip link add rmnet0 link dummy0 type rmnet mux_id 1 ip link add dummy1 master rmnet0 type dummy ip link add dummy2 master rmnet0 type dummy ip link del rmnet0 ip link del dummy2 ip link del dummy1 Splat looks like: [ 41.867595][ T1164] general protection fault, probably for non-canonical address 0xdffffc0000000101I [ 41.869993][ T1164] KASAN: null-ptr-deref in range [0x0000000000000808-0x000000000000080f] [ 41.872950][ T1164] CPU: 0 PID: 1164 Comm: ip Not tainted 5.6.0-rc1+ #447 [ 41.873915][ T1164] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 41.875161][ T1164] RIP: 0010:rmnet_unregister_bridge.isra.6+0x71/0xf0 [rmnet] [ 41.876178][ T1164] Code: 48 89 ef 48 89 c6 5b 5d e9 fc fe ff ff e8 f7 f3 ff ff 48 8d b8 08 08 00 00 48 ba 00 7 [ 41.878925][ T1164] RSP: 0018:ffff8880c4d0f188 EFLAGS: 00010202 [ 41.879774][ T1164] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000101 [ 41.887689][ T1164] RDX: dffffc0000000000 RSI: ffffffffb8cf64f0 RDI: 0000000000000808 [ 41.888727][ T1164] RBP: ffff8880c40e4000 R08: ffffed101b3c0e3c R09: 0000000000000001 [ 41.889749][ T1164] R10: 0000000000000001 R11: ffffed101b3c0e3b R12: 1ffff110189a1e3c [ 41.890783][ T1164] R13: ffff8880c4d0f200 R14: ffffffffb8d56160 R15: ffff8880ccc2c000 [ 41.891794][ T1164] FS: 00007f4300edc0c0(0000) GS:ffff8880d9c00000(0000) knlGS:0000000000000000 [ 41.892953][ T1164] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 41.893800][ T1164] CR2: 00007f43003bc8c0 CR3: 00000000ca53e001 CR4: 00000000000606f0 [ 41.894824][ T1164] Call Trace: [ 41.895274][ T1164] ? rcu_is_watching+0x2c/0x80 [ 41.895895][ T1164] rmnet_config_notify_cb+0x1f7/0x590 [rmnet] [ 41.896687][ T1164] ? rmnet_unregister_bridge.isra.6+0xf0/0xf0 [rmnet] [ 41.897611][ T1164] ? rmnet_unregister_bridge.isra.6+0xf0/0xf0 [rmnet] [ 41.898508][ T1164] ? __module_text_address+0x13/0x140 [ 41.899162][ T1164] notifier_call_chain+0x90/0x160 [ 41.899814][ T1164] rollback_registered_many+0x660/0xcf0 [ 41.900544][ T1164] ? netif_set_real_num_tx_queues+0x780/0x780 [ 41.901316][ T1164] ? __lock_acquire+0xdfe/0x3de0 [ 41.901958][ T1164] ? memset+0x1f/0x40 [ 41.902468][ T1164] ? __nla_validate_parse+0x98/0x1ab0 [ 41.903166][ T1164] unregister_netdevice_many.part.133+0x13/0x1b0 [ 41.903988][ T1164] rtnl_delete_link+0xbc/0x100 [ ... ] Fixes: 60d58f971c10 ("net: qualcomm: rmnet: Implement bridge mode") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-27net: rmnet: use upper/lower device infrastructureTaehee Yoo
netdev_upper_dev_link() is useful to manage lower/upper interfaces. And this function internally validates looping, maximum depth. All or most virtual interfaces that could have a real interface (e.g. macsec, macvlan, ipvlan etc.) use lower/upper infrastructure. Test commands: modprobe rmnet ip link add dummy0 type dummy ip link add rmnet1 link dummy0 type rmnet mux_id 1 for i in {2..100} do let A=$i-1 ip link add rmnet$i link rmnet$A type rmnet mux_id $i done ip link del dummy0 The purpose of the test commands is to make stack overflow. Splat looks like: [ 52.411438][ T1395] BUG: KASAN: slab-out-of-bounds in find_busiest_group+0x27e/0x2c00 [ 52.413218][ T1395] Write of size 64 at addr ffff8880c774bde0 by task ip/1395 [ 52.414841][ T1395] [ 52.430720][ T1395] CPU: 1 PID: 1395 Comm: ip Not tainted 5.6.0-rc1+ #447 [ 52.496511][ T1395] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 52.513597][ T1395] Call Trace: [ 52.546516][ T1395] [ 52.558773][ T1395] Allocated by task 3171537984: [ 52.588290][ T1395] BUG: unable to handle page fault for address: ffffffffb999e260 [ 52.589311][ T1395] #PF: supervisor read access in kernel mode [ 52.590529][ T1395] #PF: error_code(0x0000) - not-present page [ 52.591374][ T1395] PGD d6818067 P4D d6818067 PUD d6819063 PMD 0 [ 52.592288][ T1395] Thread overran stack, or stack corrupted [ 52.604980][ T1395] Oops: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN PTI [ 52.605856][ T1395] CPU: 1 PID: 1395 Comm: ip Not tainted 5.6.0-rc1+ #447 [ 52.611764][ T1395] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 52.621520][ T1395] RIP: 0010:stack_depot_fetch+0x10/0x30 [ 52.622296][ T1395] Code: ff e9 f9 fe ff ff 48 89 df e8 9c 1d 91 ff e9 ca fe ff ff cc cc cc cc cc cc cc 89 f8 0 [ 52.627887][ T1395] RSP: 0018:ffff8880c774bb60 EFLAGS: 00010006 [ 52.628735][ T1395] RAX: 00000000001f8880 RBX: ffff8880c774d140 RCX: 0000000000000000 [ 52.631773][ T1395] RDX: 000000000000001d RSI: ffff8880c774bb68 RDI: 0000000000003ff0 [ 52.649584][ T1395] RBP: ffffea00031dd200 R08: ffffed101b43e403 R09: ffffed101b43e403 [ 52.674857][ T1395] R10: 0000000000000001 R11: ffffed101b43e402 R12: ffff8880d900e5c0 [ 52.678257][ T1395] R13: ffff8880c774c000 R14: 0000000000000000 R15: dffffc0000000000 [ 52.694541][ T1395] FS: 00007fe867f6e0c0(0000) GS:ffff8880da000000(0000) knlGS:0000000000000000 [ 52.764039][ T1395] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 52.815008][ T1395] CR2: ffffffffb999e260 CR3: 00000000c26aa005 CR4: 00000000000606e0 [ 52.862312][ T1395] Call Trace: [ 52.887133][ T1395] Modules linked in: dummy rmnet veth openvswitch nsh nf_conncount nf_nat nf_conntrack nf_dex [ 52.936749][ T1395] CR2: ffffffffb999e260 [ 52.965695][ T1395] ---[ end trace 7e32ca99482dbb31 ]--- [ 52.966556][ T1395] RIP: 0010:stack_depot_fetch+0x10/0x30 [ 52.971083][ T1395] Code: ff e9 f9 fe ff ff 48 89 df e8 9c 1d 91 ff e9 ca fe ff ff cc cc cc cc cc cc cc 89 f8 0 [ 53.003650][ T1395] RSP: 0018:ffff8880c774bb60 EFLAGS: 00010006 [ 53.043183][ T1395] RAX: 00000000001f8880 RBX: ffff8880c774d140 RCX: 0000000000000000 [ 53.076480][ T1395] RDX: 000000000000001d RSI: ffff8880c774bb68 RDI: 0000000000003ff0 [ 53.093858][ T1395] RBP: ffffea00031dd200 R08: ffffed101b43e403 R09: ffffed101b43e403 [ 53.112795][ T1395] R10: 0000000000000001 R11: ffffed101b43e402 R12: ffff8880d900e5c0 [ 53.139837][ T1395] R13: ffff8880c774c000 R14: 0000000000000000 R15: dffffc0000000000 [ 53.141500][ T1395] FS: 00007fe867f6e0c0(0000) GS:ffff8880da000000(0000) knlGS:0000000000000000 [ 53.143343][ T1395] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 53.152007][ T1395] CR2: ffffffffb999e260 CR3: 00000000c26aa005 CR4: 00000000000606e0 [ 53.156459][ T1395] Kernel panic - not syncing: Fatal exception [ 54.213570][ T1395] Shutting down cpus with NMI [ 54.354112][ T1395] Kernel Offset: 0x33000000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0x) [ 54.355687][ T1395] Rebooting in 5 seconds.. Fixes: b37f78f234bf ("net: qualcomm: rmnet: Fix crash on real dev unregistration") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-27net: rmnet: do not allow to change mux id if mux id is duplicatedTaehee Yoo
Basically, duplicate mux id isn't be allowed. So, the creation of rmnet will be failed if there is duplicate mux id is existing. But, changelink routine doesn't check duplicate mux id. Test commands: modprobe rmnet ip link add dummy0 type dummy ip link add rmnet0 link dummy0 type rmnet mux_id 1 ip link add rmnet1 link dummy0 type rmnet mux_id 2 ip link set rmnet1 type rmnet mux_id 1 Fixes: 23790ef12082 ("net: qualcomm: rmnet: Allow to configure flags for existing devices") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-27net: rmnet: remove rcu_read_lock in rmnet_force_unassociate_device()Taehee Yoo
The notifier_call() of the slave interface removes rmnet interface with unregister_netdevice_queue(). But, before calling unregister_netdevice_queue(), it acquires rcu readlock. In the RCU critical section, sleeping isn't be allowed. But, unregister_netdevice_queue() internally calls synchronize_net(), which would sleep. So, suspicious RCU usage warning occurs. Test commands: modprobe rmnet ip link add dummy0 type dummy ip link add dummy1 type dummy ip link add rmnet0 link dummy0 type rmnet mux_id 1 ip link set dummy1 master rmnet0 ip link del dummy0 Splat looks like: [ 79.639245][ T1195] ============================= [ 79.640134][ T1195] WARNING: suspicious RCU usage [ 79.640852][ T1195] 5.6.0-rc1+ #447 Not tainted [ 79.641657][ T1195] ----------------------------- [ 79.642472][ T1195] ./include/linux/rcupdate.h:273 Illegal context switch in RCU read-side critical section! [ 79.644043][ T1195] [ 79.644043][ T1195] other info that might help us debug this: [ 79.644043][ T1195] [ 79.645682][ T1195] [ 79.645682][ T1195] rcu_scheduler_active = 2, debug_locks = 1 [ 79.646980][ T1195] 2 locks held by ip/1195: [ 79.647629][ T1195] #0: ffffffffa3cf64f0 (rtnl_mutex){+.+.}, at: rtnetlink_rcv_msg+0x457/0x890 [ 79.649312][ T1195] #1: ffffffffa39256c0 (rcu_read_lock){....}, at: rmnet_config_notify_cb+0xf0/0x590 [rmnet] [ 79.651717][ T1195] [ 79.651717][ T1195] stack backtrace: [ 79.652650][ T1195] CPU: 3 PID: 1195 Comm: ip Not tainted 5.6.0-rc1+ #447 [ 79.653702][ T1195] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 79.655037][ T1195] Call Trace: [ 79.655560][ T1195] dump_stack+0x96/0xdb [ 79.656252][ T1195] ___might_sleep+0x345/0x440 [ 79.656994][ T1195] synchronize_net+0x18/0x30 [ 79.661132][ T1195] netdev_rx_handler_unregister+0x40/0xb0 [ 79.666266][ T1195] rmnet_unregister_real_device+0x42/0xb0 [rmnet] [ 79.667211][ T1195] rmnet_config_notify_cb+0x1f7/0x590 [rmnet] [ 79.668121][ T1195] ? rmnet_unregister_bridge.isra.6+0xf0/0xf0 [rmnet] [ 79.669166][ T1195] ? rmnet_unregister_bridge.isra.6+0xf0/0xf0 [rmnet] [ 79.670286][ T1195] ? __module_text_address+0x13/0x140 [ 79.671139][ T1195] notifier_call_chain+0x90/0x160 [ 79.671973][ T1195] rollback_registered_many+0x660/0xcf0 [ 79.672893][ T1195] ? netif_set_real_num_tx_queues+0x780/0x780 [ 79.675091][ T1195] ? __lock_acquire+0xdfe/0x3de0 [ 79.675825][ T1195] ? memset+0x1f/0x40 [ 79.676367][ T1195] ? __nla_validate_parse+0x98/0x1ab0 [ 79.677290][ T1195] unregister_netdevice_many.part.133+0x13/0x1b0 [ 79.678163][ T1195] rtnl_delete_link+0xbc/0x100 [ ... ] Fixes: ceed73a2cf4a ("drivers: net: ethernet: qualcomm: rmnet: Initial implementation") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-27net: rmnet: fix suspicious RCU usageTaehee Yoo
rmnet_get_port() internally calls rcu_dereference_rtnl(), which checks RTNL. But rmnet_get_port() could be called by packet path. The packet path is not protected by RTNL. So, the suspicious RCU usage problem occurs. Test commands: modprobe rmnet ip netns add nst ip link add veth0 type veth peer name veth1 ip link set veth1 netns nst ip link add rmnet0 link veth0 type rmnet mux_id 1 ip netns exec nst ip link add rmnet1 link veth1 type rmnet mux_id 1 ip netns exec nst ip link set veth1 up ip netns exec nst ip link set rmnet1 up ip netns exec nst ip a a 192.168.100.2/24 dev rmnet1 ip link set veth0 up ip link set rmnet0 up ip a a 192.168.100.1/24 dev rmnet0 ping 192.168.100.2 Splat looks like: [ 146.630958][ T1174] WARNING: suspicious RCU usage [ 146.631735][ T1174] 5.6.0-rc1+ #447 Not tainted [ 146.632387][ T1174] ----------------------------- [ 146.633151][ T1174] drivers/net/ethernet/qualcomm/rmnet/rmnet_config.c:386 suspicious rcu_dereference_check() ! [ 146.634742][ T1174] [ 146.634742][ T1174] other info that might help us debug this: [ 146.634742][ T1174] [ 146.645992][ T1174] [ 146.645992][ T1174] rcu_scheduler_active = 2, debug_locks = 1 [ 146.646937][ T1174] 5 locks held by ping/1174: [ 146.647609][ T1174] #0: ffff8880c31dea70 (sk_lock-AF_INET){+.+.}, at: raw_sendmsg+0xab8/0x2980 [ 146.662463][ T1174] #1: ffffffff93925660 (rcu_read_lock_bh){....}, at: ip_finish_output2+0x243/0x2150 [ 146.671696][ T1174] #2: ffffffff93925660 (rcu_read_lock_bh){....}, at: __dev_queue_xmit+0x213/0x2940 [ 146.673064][ T1174] #3: ffff8880c19ecd58 (&dev->qdisc_running_key#7){+...}, at: ip_finish_output2+0x714/0x2150 [ 146.690358][ T1174] #4: ffff8880c5796898 (&dev->qdisc_xmit_lock_key#3){+.-.}, at: sch_direct_xmit+0x1e2/0x1020 [ 146.699875][ T1174] [ 146.699875][ T1174] stack backtrace: [ 146.701091][ T1174] CPU: 0 PID: 1174 Comm: ping Not tainted 5.6.0-rc1+ #447 [ 146.705215][ T1174] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 146.706565][ T1174] Call Trace: [ 146.707102][ T1174] dump_stack+0x96/0xdb [ 146.708007][ T1174] rmnet_get_port.part.9+0x76/0x80 [rmnet] [ 146.709233][ T1174] rmnet_egress_handler+0x107/0x420 [rmnet] [ 146.710492][ T1174] ? sch_direct_xmit+0x1e2/0x1020 [ 146.716193][ T1174] rmnet_vnd_start_xmit+0x3d/0xa0 [rmnet] [ 146.717012][ T1174] dev_hard_start_xmit+0x160/0x740 [ 146.717854][ T1174] sch_direct_xmit+0x265/0x1020 [ 146.718577][ T1174] ? register_lock_class+0x14d0/0x14d0 [ 146.719429][ T1174] ? dev_watchdog+0xac0/0xac0 [ 146.723738][ T1174] ? __dev_queue_xmit+0x15fd/0x2940 [ 146.724469][ T1174] ? lock_acquire+0x164/0x3b0 [ 146.725172][ T1174] __dev_queue_xmit+0x20c7/0x2940 [ ... ] Fixes: ceed73a2cf4a ("drivers: net: ethernet: qualcomm: rmnet: Initial implementation") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-27net: rmnet: fix NULL pointer dereference in rmnet_changelink()Taehee Yoo
In the rmnet_changelink(), it uses IFLA_LINK without checking NULL pointer. tb[IFLA_LINK] could be NULL pointer. So, NULL-ptr-deref could occur. rmnet already has a lower interface (real_dev). So, after this patch, rmnet_changelink() does not use IFLA_LINK anymore. Test commands: modprobe rmnet ip link add dummy0 type dummy ip link add rmnet0 link dummy0 type rmnet mux_id 1 ip link set rmnet0 type rmnet mux_id 2 Splat looks like: [ 90.578726][ T1131] general protection fault, probably for non-canonical address 0xdffffc0000000000I [ 90.581121][ T1131] KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] [ 90.582380][ T1131] CPU: 2 PID: 1131 Comm: ip Not tainted 5.6.0-rc1+ #447 [ 90.584285][ T1131] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 90.587506][ T1131] RIP: 0010:rmnet_changelink+0x5a/0x8a0 [rmnet] [ 90.588546][ T1131] Code: 83 ec 20 48 c1 ea 03 80 3c 02 00 0f 85 6f 07 00 00 48 8b 5e 28 48 b8 00 00 00 00 00 0 [ 90.591447][ T1131] RSP: 0018:ffff8880ce78f1b8 EFLAGS: 00010247 [ 90.592329][ T1131] RAX: dffffc0000000000 RBX: 0000000000000000 RCX: ffff8880ce78f8b0 [ 90.593253][ T1131] RDX: 0000000000000000 RSI: ffff8880ce78f4a0 RDI: 0000000000000004 [ 90.594058][ T1131] RBP: ffff8880cf543e00 R08: 0000000000000002 R09: 0000000000000002 [ 90.594859][ T1131] R10: ffffffffc0586a40 R11: 0000000000000000 R12: ffff8880ca47c000 [ 90.595690][ T1131] R13: ffff8880ca47c000 R14: ffff8880cf545000 R15: 0000000000000000 [ 90.596553][ T1131] FS: 00007f21f6c7e0c0(0000) GS:ffff8880da400000(0000) knlGS:0000000000000000 [ 90.597504][ T1131] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 90.599418][ T1131] CR2: 0000556e413db458 CR3: 00000000c917a002 CR4: 00000000000606e0 [ 90.600289][ T1131] Call Trace: [ 90.600631][ T1131] __rtnl_newlink+0x922/0x1270 [ 90.601194][ T1131] ? lock_downgrade+0x6e0/0x6e0 [ 90.601724][ T1131] ? rtnl_link_unregister+0x220/0x220 [ 90.602309][ T1131] ? lock_acquire+0x164/0x3b0 [ 90.602784][ T1131] ? is_bpf_image_address+0xff/0x1d0 [ 90.603331][ T1131] ? rtnl_newlink+0x4c/0x90 [ 90.603810][ T1131] ? kernel_text_address+0x111/0x140 [ 90.604419][ T1131] ? __kernel_text_address+0xe/0x30 [ 90.604981][ T1131] ? unwind_get_return_address+0x5f/0xa0 [ 90.605616][ T1131] ? create_prof_cpu_mask+0x20/0x20 [ 90.606304][ T1131] ? arch_stack_walk+0x83/0xb0 [ 90.606985][ T1131] ? stack_trace_save+0x82/0xb0 [ 90.607656][ T1131] ? stack_trace_consume_entry+0x160/0x160 [ 90.608503][ T1131] ? deactivate_slab.isra.78+0x2c5/0x800 [ 90.609336][ T1131] ? kasan_unpoison_shadow+0x30/0x40 [ 90.610096][ T1131] ? kmem_cache_alloc_trace+0x135/0x350 [ 90.610889][ T1131] ? rtnl_newlink+0x4c/0x90 [ 90.611512][ T1131] rtnl_newlink+0x65/0x90 [ ... ] Fixes: 23790ef12082 ("net: qualcomm: rmnet: Allow to configure flags for existing devices") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-27net: rmnet: fix NULL pointer dereference in rmnet_newlink()Taehee Yoo
rmnet registers IFLA_LINK interface as a lower interface. But, IFLA_LINK could be NULL. In the current code, rmnet doesn't check IFLA_LINK. So, panic would occur. Test commands: modprobe rmnet ip link add rmnet0 type rmnet mux_id 1 Splat looks like: [ 36.826109][ T1115] general protection fault, probably for non-canonical address 0xdffffc0000000000I [ 36.838817][ T1115] KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] [ 36.839908][ T1115] CPU: 1 PID: 1115 Comm: ip Not tainted 5.6.0-rc1+ #447 [ 36.840569][ T1115] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 36.841408][ T1115] RIP: 0010:rmnet_newlink+0x54/0x510 [rmnet] [ 36.841986][ T1115] Code: 83 ec 18 48 c1 e9 03 80 3c 01 00 0f 85 d4 03 00 00 48 8b 6a 28 48 b8 00 00 00 00 00 c [ 36.843923][ T1115] RSP: 0018:ffff8880b7e0f1c0 EFLAGS: 00010247 [ 36.844756][ T1115] RAX: dffffc0000000000 RBX: ffff8880d14cca00 RCX: 1ffff11016fc1e99 [ 36.845859][ T1115] RDX: 0000000000000000 RSI: ffff8880c3d04000 RDI: 0000000000000004 [ 36.846961][ T1115] RBP: 0000000000000000 R08: ffff8880b7e0f8b0 R09: ffff8880b6ac2d90 [ 36.848020][ T1115] R10: ffffffffc0589a40 R11: ffffed1016d585b7 R12: ffffffff88ceaf80 [ 36.848788][ T1115] R13: ffff8880c3d04000 R14: ffff8880b7e0f8b0 R15: ffff8880c3d04000 [ 36.849546][ T1115] FS: 00007f50ab3360c0(0000) GS:ffff8880da000000(0000) knlGS:0000000000000000 [ 36.851784][ T1115] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 36.852422][ T1115] CR2: 000055871afe5ab0 CR3: 00000000ae246001 CR4: 00000000000606e0 [ 36.853181][ T1115] Call Trace: [ 36.853514][ T1115] __rtnl_newlink+0xbdb/0x1270 [ 36.853967][ T1115] ? lock_downgrade+0x6e0/0x6e0 [ 36.854420][ T1115] ? rtnl_link_unregister+0x220/0x220 [ 36.854936][ T1115] ? lock_acquire+0x164/0x3b0 [ 36.855376][ T1115] ? is_bpf_image_address+0xff/0x1d0 [ 36.855884][ T1115] ? rtnl_newlink+0x4c/0x90 [ 36.856304][ T1115] ? kernel_text_address+0x111/0x140 [ 36.856857][ T1115] ? __kernel_text_address+0xe/0x30 [ 36.857440][ T1115] ? unwind_get_return_address+0x5f/0xa0 [ 36.858063][ T1115] ? create_prof_cpu_mask+0x20/0x20 [ 36.858644][ T1115] ? arch_stack_walk+0x83/0xb0 [ 36.859171][ T1115] ? stack_trace_save+0x82/0xb0 [ 36.859710][ T1115] ? stack_trace_consume_entry+0x160/0x160 [ 36.860357][ T1115] ? deactivate_slab.isra.78+0x2c5/0x800 [ 36.860928][ T1115] ? kasan_unpoison_shadow+0x30/0x40 [ 36.861520][ T1115] ? kmem_cache_alloc_trace+0x135/0x350 [ 36.862125][ T1115] ? rtnl_newlink+0x4c/0x90 [ 36.864073][ T1115] rtnl_newlink+0x65/0x90 [ ... ] Fixes: ceed73a2cf4a ("drivers: net: ethernet: qualcomm: rmnet: Initial implementation") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-27net: phy: marvell: don't interpret PHY status unless resolvedRussell King
Don't attempt to interpret the PHY specific status register unless the PHY is indicating that the resolution is valid. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-27mlx5: register lag notifier for init network namespace onlyJiri Pirko
The current code causes problems when the unregistering netdevice could be different then the registering one. Since the check in mlx5_lag_netdev_event() does not allow any other network namespace anyway, fix this by registerting the lag notifier per init network namespace only. Fixes: d48834f9d4b4 ("mlx5: Use dev_net netdevice notifier registrations") Signed-off-by: Jiri Pirko <jiri@mellanox.com> Tested-by: Aya Levin <ayal@mellanox.com> Acked-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-27Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid Pull HID subsystem fixes from Jiri Kosina: - syzkaller-reported error handling fixes in various drivers, from various people - increase of HID report buffer size to 8K, which is apparently needed by certain modern devices - a few new device-ID-specific fixes / quirks - battery charging status reporting fix in logitech-hidpp, from Filipe Laíns * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: HID: hid-bigbenff: fix race condition for scheduled work during removal HID: hid-bigbenff: call hid_hw_stop() in case of error HID: hid-bigbenff: fix general protection fault caused by double kfree HID: i2c-hid: add Trekstor Surfbook E11B to descriptor override HID: alps: Fix an error handling path in 'alps_input_configured()' HID: hiddev: Fix race in in hiddev_disconnect() HID: core: increase HID report buffer size to 8KiB HID: core: fix off-by-one memset in hid_report_raw_event() HID: apple: Add support for recent firmware on Magic Keyboards HID: ite: Only bind to keyboard USB interface on Acer SW5-012 keyboard dock HID: logitech-hidpp: BatteryVoltage: only read chargeStatus if extPower is active
2020-02-27hinic: fix a bug of rss configurationLuo bin
should use real receive queue number to configure hw rss indirect table rather than maximal queue number Signed-off-by: Luo bin <luobin9@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-27hinic: fix a bug of setting hw_ioctxtLuo bin
a reserved field is used to signify prime physical function index in the latest firmware version, so we must assign a value to it correctly Signed-off-by: Luo bin <luobin9@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-27hinic: fix a irq affinity bugLuo bin
can not use a local variable as an input parameter of irq_set_affinity_hint Signed-off-by: Luo bin <luobin9@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-28nvme-pci: Hold cq_poll_lock while completing CQEsBijan Mottahedeh
Completions need to consumed in the same order the controller submitted them, otherwise future completion entries may overwrite ones we haven't handled yet. Hold the nvme queue's poll lock while completing new CQEs to prevent another thread from freeing command tags for reuse out-of-order. Fixes: dabcefab45d3 ("nvme: provide optimized poll function for separate poll queues") Signed-off-by: Bijan Mottahedeh <bijan.mottahedeh@oracle.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Keith Busch <kbusch@kernel.org>
2020-02-27PCI: brcmstb: Fix build on 32bit ARM platforms with older compilersMarek Szyprowski
Some older compilers have no implementation for the helper for 64-bit unsigned division/modulo, so linking pcie-brcmstb driver causes the "undefined reference to `__aeabi_uldivmod'" error. *rc_bar2_size is always a power of two, because it is calculated as: "1ULL << fls64(entry->res->end - entry->res->start)", so the modulo operation in the subsequent check can be replaced by a simple logical AND with a proper mask. Link: https://lore.kernel.org/r/20200227115146.24515-1-m.szyprowski@samsung.com Fixes: c0452137034b ("PCI: brcmstb: Add Broadcom STB PCIe host controller driver") Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2020-02-27spi/zynqmp: remove entry that causes a cs glitchThommy Jakobsson
In the public interface for chipselect, there is always an entry commented as "Dummy generic FIFO entry" pushed down to the fifo right after the activate/deactivate command. The dummy entry is 0x0, irregardless if the intention was to activate or deactive the cs. This causes the cs line to glitch rather than beeing activated in the case when there was an activate command. This has been observed on oscilloscope, and have caused problems for at least one specific flash device type connected to the qspi port. After the change the glitch is gone and cs goes active when intended. The reason why this worked before (except for the glitch) was because when sending the actual data, the CS bits are once again set. Since most flashes uses mode 0, there is always a half clk period anyway for cs to clk active setup time. If someone would rely on timing from a chip_select call to a transfer_one, it would fail though. It is unknown why the dummy entry was there in the first place, git log seems to be of no help in this case. The reference manual gives no indication of the necessity of this. In fact the lower 8 bits are a setup (or hold in case of deactivate) time expressed in cycles. So this should not be needed to fulfill any setup/hold timings. Signed-off-by: Thommy Jakobsson <thommyj@gmail.com> Reviewed-by: Naga Sureshkumar Relli <naga.sureshkumar.relli@xilinx.com> Link: https://lore.kernel.org/r/20200224162643.29102-1-thommyj@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-02-27cpufreq: Fix policy initialization for internal governor driversRafael J. Wysocki
Before commit 1e4f63aecb53 ("cpufreq: Avoid creating excessively large stack frames") the initial value of the policy field in struct cpufreq_policy set by the driver's ->init() callback was implicitly passed from cpufreq_init_policy() to cpufreq_set_policy() if the default governor was neither "performance" nor "powersave". After that commit, however, cpufreq_init_policy() must take that case into consideration explicitly and handle it as appropriate, so make that happen. Fixes: 1e4f63aecb53 ("cpufreq: Avoid creating excessively large stack frames") Link: https://lore.kernel.org/linux-pm/39fb762880c27da110086741315ca8b111d781cd.camel@gmail.com/ Reported-by: Artem Bityutskiy <dedekind1@gmail.com> Cc: 5.4+ <stable@vger.kernel.org> # 5.4+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
2020-02-26net: stmmac: fix notifier registrationAaro Koskinen
We cannot register the same netdev notifier multiple times when probing stmmac devices. Register the notifier only once in module init, and also make debugfs creation/deletion safe against simultaneous notifier call. Fixes: 481a7d154cbb ("stmmac: debugfs entry name is not be changed when udev rename device name.") Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-26net: phy: mscc: fix firmware pathsAntoine Tenart
The firmware paths for the VSC8584 PHYs not not contain the leading 'microchip/' directory, as used in linux-firmware, resulting in an error when probing the driver. This patch fixes it. Fixes: a5afc1678044 ("net: phy: mscc: add support for VSC8584 PHY") Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-26net: phy: corrected the return value for genphy_check_and_restart_aneg and ↵Sudheesh Mavila
genphy_c45_check_and_restart_aneg When auto-negotiation is not required, return value should be zero. Changes v1->v2: - improved comments and code as Andrew Lunn and Heiner Kallweit suggestion - fixed issue in genphy_c45_check_and_restart_aneg as Russell King suggestion. Fixes: 2a10ab043ac5 ("net: phy: add genphy_check_and_restart_aneg()") Fixes: 1af9f16840e9 ("net: phy: add genphy_c45_check_and_restart_aneg()") Signed-off-by: Sudheesh Mavila <sudheesh.mavila@amd.com> Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-26slip: not call free_netdev before rtnl_unlock in slip_openyangerkun
As the description before netdev_run_todo, we cannot call free_netdev before rtnl_unlock, fix it by reorder the code. Signed-off-by: yangerkun <yangerkun@huawei.com> Reviewed-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-26net: bcmgenet: Clear ID_MODE_DIS in EXT_RGMII_OOB_CTRL when not neededNicolas Saenz Julienne
Outdated Raspberry Pi 4 firmware might configure the external PHY as rgmii although the kernel currently sets it as rgmii-rxid. This makes connections unreliable as ID_MODE_DIS is left enabled. To avoid this, explicitly clear that bit whenever we don't need it. Fixes: da38802211cc ("net: bcmgenet: Add RGMII_RXID support") Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-26net: dsa: bcm_sf2: Forcibly configure IMP port for 1Gb/secFlorian Fainelli
We are still experiencing some packet loss with the existing advanced congestion buffering (ACB) settings with the IMP port configured for 2Gb/sec, so revert to conservative link speeds that do not produce packet loss until this is resolved. Fixes: 8f1880cbe8d0 ("net: dsa: bcm_sf2: Configure IMP port for 2Gb/sec") Fixes: de34d7084edd ("net: dsa: bcm_sf2: Only 7278 supports 2Gb/sec IMP port") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Vivien Didelot <vivien.didelot@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-26Merge tag 'tag-chrome-platform-fixes-for-v5.6-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux Pull chrome platform fix from Benson Leung: "Fix a build warning" * tag 'tag-chrome-platform-fixes-for-v5.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux: platform/chrome: wilco_ec: Include asm/unaligned instead of linux/ path
2020-02-26bnxt_en: add newline to netdev_*() format stringsJonathan Lemon
Add missing newlines to netdev_* format strings so the lines aren't buffered by the printk subsystem. Nitpicked-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com> Acked-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-26Merge tag 'gvt-fixes-2020-02-26' of https://github.com/intel/gvt-linux into ↵Jani Nikula
drm-intel-fixes gvt-fixes-2020-02-26 - Fix virtual display reset (Tina) - Fix one use-after-free for dmabuf (Tina) Signed-off-by: Jani Nikula <jani.nikula@intel.com> From: Zhenyu Wang <zhenyuw@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200226103016.GC10413@zhen-hp.sh.intel.com
2020-02-26drm/radeon: Inline drm_get_pci_devDaniel Vetter
It's the last user, and more importantly, it's the last non-legacy user of anything in drm_pci.c. The only tricky bit is the agp initialization. But a close look shows that radeon does not use the drm_agp midlayer (the main use of that is drm_bufs for legacy drivers), and instead could use the agp subsystem directly (like nouveau does already). Hence we can just pull this in too. A further step would be to entirely drop the use of drm_device->agp, but feels like too much churn just for this patch. Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: "Christian König" <christian.koenig@amd.com> Cc: "David (ChunMing) Zhou" <David1.Zhou@amd.com> Cc: amd-gfx@lists.freedesktop.org Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Emil Velikov <emil.velikov@collabora.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2020-02-26drm/amdgpu: Drop DRIVER_USE_AGPDaniel Vetter
This doesn't do anything except auto-init drm_agp support when you call drm_get_pci_dev(). Which amdgpu stopped doing with commit b58c11314a1706bf094c489ef5cb28f76478c704 Author: Alex Deucher <alexander.deucher@amd.com> Date: Fri Jun 2 17:16:31 2017 -0400 drm/amdgpu: drop deprecated drm_get_pci_dev and drm_put_dev No idea whether this was intentional or accidental breakage, but I guess anyone who manages to boot a this modern gpu behind an agp bridge deserves a price. A price I never expect anyone to ever collect :-) Cc: Alex Deucher <alexander.deucher@amd.com> Cc: "Christian König" <christian.koenig@amd.com> Cc: Hawking Zhang <Hawking.Zhang@amd.com> Cc: Xiaojie Yuan <xiaojie.yuan@amd.com> Cc: Evan Quan <evan.quan@amd.com> Cc: "Tianci.Yin" <tianci.yin@amd.com> Cc: "Marek Olšák" <marek.olsak@amd.com> Cc: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Emil Velikov <emil.velikov@collabora.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2020-02-26spi: pxa2xx: Add CS control clock quirkEvan Green
In some circumstances on Intel LPSS controllers, toggling the LPSS CS control register doesn't actually cause the CS line to toggle. This seems to be failure of dynamic clock gating that occurs after going through a suspend/resume transition, where the controller is sent through a reset transition. This ruins SPI transactions that either rely on delay_usecs, or toggle the CS line without sending data. Whenever CS is toggled, momentarily set the clock gating register to "Force On" to poke the controller into acting on CS. Signed-off-by: Rajat Jain <rajatja@google.com> Signed-off-by: Evan Green <evgreen@chromium.org> Link: https://lore.kernel.org/r/20200211223700.110252-1-rajatja@google.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-02-26regulator: add smb208 supportAnsuel Smith
Smb208 regulators are used on some ipq806x soc. Add support for it to make it avaiable on some routers that use it. Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Signed-off-by: Adrian Panella <ianchi74@outlook.com> Acked-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20200219163711.479-1-ansuelsmth@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-02-26efi: READ_ONCE rng seed size before munmapJason A. Donenfeld
This function is consistent with using size instead of seed->size (except for one place that this patch fixes), but it reads seed->size without using READ_ONCE, which means the compiler might still do something unwanted. So, this commit simply adds the READ_ONCE wrapper. Fixes: 636259880a7e ("efi: Add support for seeding the RNG from a UEFI ...") Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: linux-efi@vger.kernel.org Cc: Ingo Molnar <mingo@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20200217123354.21140-1-Jason@zx2c4.com Link: https://lore.kernel.org/r/20200221084849.26878-5-ardb@kernel.org
2020-02-26drm/i915: Avoid recursing onto active vma from the shrinkerChris Wilson
We mark the vma as active while binding it in order to protect outselves from being shrunk under mempressure. This only works if we are strict in not attempting to shrink active objects. <6> [472.618968] Workqueue: events_unbound fence_work [i915] <4> [472.618970] Call Trace: <4> [472.618974] ? __schedule+0x2e5/0x810 <4> [472.618978] schedule+0x37/0xe0 <4> [472.618982] schedule_preempt_disabled+0xf/0x20 <4> [472.618984] __mutex_lock+0x281/0x9c0 <4> [472.618987] ? mark_held_locks+0x49/0x70 <4> [472.618989] ? _raw_spin_unlock_irqrestore+0x47/0x60 <4> [472.619038] ? i915_vma_unbind+0xae/0x110 [i915] <4> [472.619084] ? i915_vma_unbind+0xae/0x110 [i915] <4> [472.619122] i915_vma_unbind+0xae/0x110 [i915] <4> [472.619165] i915_gem_object_unbind+0x1dc/0x400 [i915] <4> [472.619208] i915_gem_shrink+0x328/0x660 [i915] <4> [472.619250] ? i915_gem_shrink_all+0x38/0x60 [i915] <4> [472.619282] i915_gem_shrink_all+0x38/0x60 [i915] <4> [472.619325] vm_alloc_page.constprop.25+0x1aa/0x240 [i915] <4> [472.619330] ? rcu_read_lock_sched_held+0x4d/0x80 <4> [472.619363] ? __alloc_pd+0xb/0x30 [i915] <4> [472.619366] ? module_assert_mutex_or_preempt+0xf/0x30 <4> [472.619368] ? __module_address+0x23/0xe0 <4> [472.619371] ? is_module_address+0x26/0x40 <4> [472.619374] ? static_obj+0x34/0x50 <4> [472.619376] ? lockdep_init_map+0x4d/0x1e0 <4> [472.619407] setup_page_dma+0xd/0x90 [i915] <4> [472.619437] alloc_pd+0x29/0x50 [i915] <4> [472.619470] __gen8_ppgtt_alloc+0x443/0x6b0 [i915] <4> [472.619503] gen8_ppgtt_alloc+0xd7/0x300 [i915] <4> [472.619535] ppgtt_bind_vma+0x2a/0xe0 [i915] <4> [472.619577] __vma_bind+0x26/0x40 [i915] <4> [472.619611] fence_work+0x1c/0x90 [i915] <4> [472.619617] process_one_work+0x26a/0x620 Fixes: 2850748ef876 ("drm/i915: Pull i915_vma_pin under the vm->mutex") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200221221818.2861432-1-chris@chris-wilson.co.uk (cherry picked from commit 6f24e41022f28061368776ea1514db0a6e67a9b1) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2020-02-26drm/i915/pmu: Avoid using globals for PMU eventsMichał Winiarski
Attempting to bind / unbind module from devices where we have both integrated and discreete GPU handled by i915, will cause us to try and double free the global state, hitting null ptr deref in free_event_attributes. Let's move it to i915_pmu. Fixes: 05488673a4d4 ("drm/i915/pmu: Support multiple GPUs") Signed-off-by: Michał Winiarski <michal.winiarski@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20200219161822.24592-2-michal.winiarski@intel.com (cherry picked from commit 46129dc10f47c5c2b51c93a82b7b2aca46574ae0) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2020-02-26drm/i915/pmu: Avoid using globals for CPU hotplug stateMichał Winiarski
Attempting to bind / unbind module from devices where we have both integrated and discreete GPU handled by i915 can lead to leaks and warnings from cpuhp: Error: Removing state XXX which has instances left. Let's move the state to i915_pmu. Fixes: 05488673a4d4 ("drm/i915/pmu: Support multiple GPUs") Signed-off-by: Michał Winiarski <michal.winiarski@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20200219161822.24592-1-michal.winiarski@intel.com (cherry picked from commit f5a179d4687d4e7bfadd7cbda7ee5d0bad76761f) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2020-02-26drm/i915/gtt: Downgrade gen7 (ivb, byt, hsw) back to aliasing-ppgttChris Wilson
Full-ppgtt on gen7 is proving to be highly unstable and not robust. Closes: https://gitlab.freedesktop.org/drm/intel/issues/694 Fixes: 3cd6e8860ecd ("drm/i915/gen7: Re-enable full-ppgtt for ivb & hsw") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Dave Airlie <airlied@redhat.com> Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200224101120.4024481-1-chris@chris-wilson.co.uk (cherry picked from commit 4fbe112a569526e46fa2accb5763c069f78cb431) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2020-02-26drm/i915: fix header test with GCOVJani Nikula
$(CC) with $(CFLAGS_GCOV) assumes the output filename with .gcno suffix appended is writable. This is not the case when the output filename is /dev/null: HDRTEST drivers/gpu/drm/i915/display/intel_frontbuffer.h /dev/null:1:0: error: cannot open /dev/null.gcno HDRTEST drivers/gpu/drm/i915/display/intel_ddi.h /dev/null:1:0: error: cannot open /dev/null.gcno make[5]: *** [../drivers/gpu/drm/i915/Makefile:307: drivers/gpu/drm/i915/display/intel_ddi.hdrtest] Error 1 make[5]: *** Waiting for unfinished jobs.... make[5]: *** [../drivers/gpu/drm/i915/Makefile:307: drivers/gpu/drm/i915/display/intel_frontbuffer.hdrtest] Error 1 Filter out $(CFLAGS_GVOC) from the header test $(c_flags) as they don't make sense here anyway. References: http://lore.kernel.org/r/d8112767-4089-4c58-d7d3-2ce03139858a@infradead.org Reported-by: Randy Dunlap <rdunlap@infradead.org> Fixes: c6d4a099a240 ("drm/i915: reimplement header test feature") Cc: Masahiro Yamada <masahiroy@kernel.org> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200221105414.14358-1-jani.nikula@intel.com (cherry picked from commit 408c1b3253dab93da175690dc0e21dd8bccf3371) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2020-02-25null_blk: remove unused fields in 'nullb_cmd'Dongli Zhang
'list', 'll_list' and 'csd' are no longer used. The 'list' is not used since it was introduced by commit f2298c0403b0 ("null_blk: multi queue aware block test driver"). The 'll_list' is no longer used since commit 3c395a969acc ("null_blk: set a separate timer for each command"). The 'csd' is no longer used since commit ce2c350b2cfe ("null_blk: use blk_complete_request and blk_mq_complete_request"). Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-02-25amdgpu/gmc_v9: save/restore sdpif regs during S3Shirish S
fixes S3 issue with IOMMU + S/G enabled @ 64M VRAM. Suggested-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Shirish S <shirish.s@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2020-02-25drm/amdgpu: fix memory leak during TDR test(v2)Monk Liu
fix system memory leak v2: fix coding style Signed-off-by: Monk Liu <Monk.Liu@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-02-25drm/i915/gvt: Fix orphan vgpu dmabuf_objs' lifetimeTina Zhang
Deleting dmabuf item's list head after releasing its container can lead to KASAN-reported issue: BUG: KASAN: use-after-free in __list_del_entry_valid+0x15/0xf0 Read of size 8 at addr ffff88818a4598a8 by task kworker/u8:3/13119 So fix this issue by puting deleting dmabuf_objs ahead of releasing its container. Fixes: dfb6ae4e14bd6 ("drm/i915/gvt: Handle orphan dmabuf_objs") Signed-off-by: Tina Zhang <tina.zhang@intel.com> Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20200225053527.8336-2-tina.zhang@intel.com
2020-02-24spi: pxa2xx: drv_data can't be NULL in ->remove()Andy Shevchenko
There is no need for drv_data check against NULL, since it won't happen. Remove useless check. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20200224154556.11627-2-andriy.shevchenko@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-02-24spi: pxa2xx: Return error codes from pxa2xx_spi_init_pdata()Andy Shevchenko
For better understanding what's going on on error path, return distinguished error codes instead of NULL pointer. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20200224154556.11627-1-andriy.shevchenko@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-02-24scsi: compat_ioctl: cdrom: Replace .ioctl with .compat_ioctl in four ↵Adam Williamson
appropriate places Arnd Bergmann inadvertently typoed these in d320a9551e394 and 64cbfa96551a; they seem to be the cause of https://bugzilla.redhat.com/show_bug.cgi?id=1801353 , invalid SCSI commands when udev tries to query a DVD drive. [arnd] Found another instance of the same bug, also introduced in my compat_ioctl series. Link: https://bugzilla.redhat.com/show_bug.cgi?id=1801353 Link: https://lore.kernel.org/r/20200219165139.3467320-1-arnd@arndb.de Fixes: c103d6ee69f9 ("compat_ioctl: ide: floppy: add handler") Fixes: 64cbfa96551a ("compat_ioctl: move cdrom commands into cdrom.c") Fixes: d320a9551e39 ("compat_ioctl: scsi: move ioctl handling into drivers") Bisected-by: Chris Murphy <bugzilla@colorremedies.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Adam Williamson <awilliam@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-02-24Merge branch 'linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto fixes from Herbert Xu: "This fixes a Kconfig-related build error and an integer overflow in chacha20poly1305" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: chacha20poly1305 - prevent integer overflow on large input tee: amdtee: amdtee depends on CRYPTO_DEV_CCP_DD
2020-02-24floppy: check FDC index for errors before assigning itLinus Torvalds
Jordy Zomer reported a KASAN out-of-bounds read in the floppy driver in wait_til_ready(). Which on the face of it can't happen, since as Willy Tarreau points out, the function does no particular memory access. Except through the FDCS macro, which just indexes a static allocation through teh current fdc, which is always checked against N_FDC. Except the checking happens after we've already assigned the value. The floppy driver is a disgrace (a lot of it going back to my original horrd "design"), and has no real maintainer. Nobody has the hardware, and nobody really cares. But it still gets used in virtual environment because it's one of those things that everybody supports. The whole thing should be re-written, or at least parts of it should be seriously cleaned up. The 'current fdc' index, which is used by the FDCS macro, and which is often shadowed by a local 'fdc' variable, is a prime example of how not to write code. But because nobody has the hardware or the motivation, let's just fix up the immediate problem with a nasty band-aid: test the fdc index before actually assigning it to the static 'fdc' variable. Reported-by: Jordy Zomer <jordy@simplyhacker.com> Cc: Willy Tarreau <w@1wt.eu> Cc: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-02-24net: ll_temac: Handle DMA halt condition caused by buffer underrunEsben Haabendal
The SDMA engine used by TEMAC halts operation when it has finished processing of the last buffer descriptor in the buffer ring. Unfortunately, no interrupt event is generated when this happens, so we need to setup another mechanism to make sure DMA operation is restarted when enough buffers have been added to the ring. Fixes: 92744989533c ("net: add Xilinx ll_temac device driver") Signed-off-by: Esben Haabendal <esben@geanix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-24net: ll_temac: Fix RX buffer descriptor handling on GFP_ATOMIC pressureEsben Haabendal
Failures caused by GFP_ATOMIC memory pressure have been observed, and due to the missing error handling, results in kernel crash such as [1876998.350133] kernel BUG at mm/slub.c:3952! [1876998.350141] invalid opcode: 0000 [#1] PREEMPT SMP PTI [1876998.350147] CPU: 2 PID: 0 Comm: swapper/2 Not tainted 5.3.0-scnxt #1 [1876998.350150] Hardware name: N/A N/A/COMe-bIP2, BIOS CCR2R920 03/01/2017 [1876998.350160] RIP: 0010:kfree+0x1ca/0x220 [1876998.350164] Code: 85 db 74 49 48 8b 95 68 01 00 00 48 31 c2 48 89 10 e9 d7 fe ff ff 49 8b 04 24 a9 00 00 01 00 75 0b 49 8b 44 24 08 a8 01 75 02 <0f> 0b 49 8b 04 24 31 f6 a9 00 00 01 00 74 06 41 0f b6 74 24 5b [1876998.350172] RSP: 0018:ffffc900000f0df0 EFLAGS: 00010246 [1876998.350177] RAX: ffffea00027f0708 RBX: ffff888008d78000 RCX: 0000000000391372 [1876998.350181] RDX: 0000000000000000 RSI: ffffe8ffffd01400 RDI: ffff888008d78000 [1876998.350185] RBP: ffff8881185a5d00 R08: ffffc90000087dd8 R09: 000000000000280a [1876998.350189] R10: 0000000000000002 R11: 0000000000000000 R12: ffffea0000235e00 [1876998.350193] R13: ffff8881185438a0 R14: 0000000000000000 R15: ffff888118543870 [1876998.350198] FS: 0000000000000000(0000) GS:ffff88811f300000(0000) knlGS:0000000000000000 [1876998.350203] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 s#1 Part1 [1876998.350206] CR2: 00007f8dac7b09f0 CR3: 000000011e20a006 CR4: 00000000001606e0 [1876998.350210] Call Trace: [1876998.350215] <IRQ> [1876998.350224] ? __netif_receive_skb_core+0x70a/0x920 [1876998.350229] kfree_skb+0x32/0xb0 [1876998.350234] __netif_receive_skb_core+0x70a/0x920 [1876998.350240] __netif_receive_skb_one_core+0x36/0x80 [1876998.350245] process_backlog+0x8b/0x150 [1876998.350250] net_rx_action+0xf7/0x340 [1876998.350255] __do_softirq+0x10f/0x353 [1876998.350262] irq_exit+0xb2/0xc0 [1876998.350265] do_IRQ+0x77/0xd0 [1876998.350271] common_interrupt+0xf/0xf [1876998.350274] </IRQ> In order to handle such failures more graceful, this change splits the receive loop into one for consuming the received buffers, and one for allocating new buffers. When GFP_ATOMIC allocations fail, the receive will continue with the buffers that is still there, and with the expectation that the allocations will succeed in a later call to receive. Fixes: 92744989533c ("net: add Xilinx ll_temac device driver") Signed-off-by: Esben Haabendal <esben@geanix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-24net: ll_temac: Add more error handling of dma_map_single() callsEsben Haabendal
This adds error handling to the remaining dma_map_single() calls, so that behavior is well defined if/when we run out of DMA memory. Fixes: 92744989533c ("net: add Xilinx ll_temac device driver") Signed-off-by: Esben Haabendal <esben@geanix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-24net: ll_temac: Fix race condition causing TX hangEsben Haabendal
It is possible that the interrupt handler fires and frees up space in the TX ring in between checking for sufficient TX ring space and stopping the TX queue in temac_start_xmit. If this happens, the queue wake from the interrupt handler will occur before the queue is stopped, causing a lost wakeup and the adapter's transmit hanging. To avoid this, after stopping the queue, check again whether there is sufficient space in the TX ring. If so, wake up the queue again. This is a port of the similar fix in axienet driver, commit 7de44285c1f6 ("net: axienet: Fix race condition causing TX hang"). Fixes: 23ecc4bde21f ("net: ll_temac: fix checksum offload logic") Signed-off-by: Esben Haabendal <esben@geanix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-24scsi: zfcp: fix wrong data and display format of SFP+ temperatureBenjamin Block
When implementing support for retrieval of local diagnostic data from the FCP channel, the wrong data format was assumed for the temperature of the local SFP+ connector. The Fibre Channel Link Services (FC-LS-3) specification is not clear on the format of the stored integer, and only after consulting the SNIA specification SFF-8472 did we realize it is stored as two's complement. Thus, the used data and display format is wrong, and highly misleading for users when the temperature should drop below 0°C (however unlikely that may be). To fix this, change the data format in `struct fsf_qtcb_bottom_port` from unsigned to signed, and change the printf format string used to generate `zfcp_sysfs_adapter_diag_sfp_temperature_show()` from `%hu` to `%hd`. Link: https://lore.kernel.org/r/d6e3be5428da5c9490cfff4df7cae868bc9f1a7e.1582039501.git.bblock@linux.ibm.com Fixes: a10a61e807b0 ("scsi: zfcp: support retrieval of SFP Data via Exchange Port Data") Fixes: 6028f7c4cd87 ("scsi: zfcp: introduce sysfs interface for diagnostics of local SFP transceiver") Cc: <stable@vger.kernel.org> # 5.5+ Reviewed-by: Jens Remus <jremus@linux.ibm.com> Reviewed-by: Fedor Loshakov <loshakov@linux.ibm.com> Reviewed-by: Steffen Maier <maier@linux.ibm.com> Signed-off-by: Benjamin Block <bblock@linux.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
generated by cgit (git 2.34.1) at 2025-09-12 00:51:21 +0000