summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2023-02-03ice: split ice_vsi_setup into smaller functionsMichal Swiatkowski
Main goal is to reuse the same functions in VSI config and rebuild paths. To do this split ice_vsi_setup into smaller pieces and reuse it during rebuild. ice_vsi_alloc() should only alloc memory, not set the default values for VSI. Move setting defaults to separate function. This will allow config of already allocated VSI, for example in reload path. The path is mostly moving code around without introducing new functionality. Functions ice_vsi_cfg() and ice_vsi_decfg() were added, but they are using code that already exist. Use flag to pass information about VSI initialization during rebuild instead of using boolean value. Co-developed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-02-03ice: cleanup in VSI config/deconfig codeMichal Swiatkowski
Do few small cleanups: 1) Rename the function to reflect that it doesn't configure all things related to VSI. ice_vsi_cfg_lan() better fits to what function is doing. ice_vsi_cfg() can be use to name function that will configure whole VSI. 2) Remove unused ethtype field from VSI. There is no need to set ethtype here, because it is never used. 3) Remove unnecessary check for ICE_VSI_CHNL. There is check for ICE_VSI_CHNL in ice_vsi_get_qs, so there is no need to check it before calling the function. 4) Simplify ice_vsi_alloc() call. There is no need to check the type of VSI before calling ice_vsi_alloc(). For ICE_VSI_CHNL vf is always NULL (ice_vsi_setup() is called with vf=NULL). For ICE_VSI_VF or ICE_VSI_CTRL ch is always NULL and for other VSI types ch and vf are always NULL. 5) Remove unnecessary call to ice_vsi_dis_irq(). ice_vsi_dis_irq() will be called in ice_vsi_close() flow (ice_vsi_close() -> ice_vsi_down() -> ice_vsi_dis_irq()). Remove unnecessary call. 6) Don't remove specific filters in release. All hw filters are removed in ice_fltr_remove_alli(), which is always called in VSI release flow. There is no need to remove only ethertype filters before calling ice_fltr_remove_all(). 7) Rename ice_vsi_clear() to ice_vsi_free(). As ice_vsi_clear() only free memory allocated in ice_vsi_alloc() rename it to ice_vsi_free() which better shows what function is doing. 8) Free coalesce param in rebuild. There is potential memory leak if configuration of VSI lan fails. Free coalesce to avoid it. Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-02-03ice: alloc id for RDMA using xa_arrayMichal Swiatkowski
Use xa_array instead of deprecated ida to alloc id for RDMA aux driver. Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-02-03ice: move RDMA init to ice_idc.cMichal Swiatkowski
Simplify probe flow by moving all RDMA related code to ice_init_rdma(). Unroll irq allocation if RDMA initialization fails. Implement ice_deinit_rdma() and use it in remove flow. Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Acked-by: Dave Ertman <david.m.ertman@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-02-03vringh: use bvec_set_page to initialize a bvecChristoph Hellwig
Use the bvec_set_page helper to initialize a bvec. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/r/20230203150634.3199647-23-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-02-03zram: use bvec_set_page to initialize bvecsChristoph Hellwig
Use the bvec_set_page helper to initialize bvecs. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Link: https://lore.kernel.org/r/20230203150634.3199647-11-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-02-03virtio_blk: use bvec_set_virt to initialize special_vecChristoph Hellwig
Use the bvec_set_virt helper to initialize the special_vec. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/r/20230203150634.3199647-10-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-02-03rbd: use bvec_set_page to initialize the copy up bvecChristoph Hellwig
Use the bvec_set_page helper to initialize the copy up bvec. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Ilya Dryomov <idryomov@gmail.com> Link: https://lore.kernel.org/r/20230203150634.3199647-9-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-02-03nvme: use bvec_set_virt to initialize special_vecChristoph Hellwig
Use the bvec_set_virt helper to initialize the special_vec. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Link: https://lore.kernel.org/r/20230203150634.3199647-8-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-02-03nvmet: use bvec_set_page to initialize bvecsChristoph Hellwig
Use the bvec_set_page helper to initialize bvecs. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Link: https://lore.kernel.org/r/20230203150634.3199647-7-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-02-03target: use bvec_set_page to initialize bvecsChristoph Hellwig
Use the bvec_set_page helper to initialize bvecs. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Link: https://lore.kernel.org/r/20230203150634.3199647-6-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-02-03sd: factor out a sd_set_special_bvec helperChristoph Hellwig
Add a helper for setting up the special_bvec instead of open coding it in three place, and use the new bvec_set_page helper to initialize special_vec. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Link: https://lore.kernel.org/r/20230203150634.3199647-5-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-02-03efi: fix potential NULL deref in efi_mem_reserve_persistentAnton Gusev
When iterating on a linked list, a result of memremap is dereferenced without checking it for NULL. This patch adds a check that falls back on allocating a new page in case memremap doesn't succeed. Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: 18df7577adae ("efi/memreserve: deal with memreserve entries in unmapped memory") Signed-off-by: Anton Gusev <aagusev@ispras.ru> [ardb: return -ENOMEM instead of breaking out of the loop] Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
2023-02-03wifi: mt76: support ww power config in dts nodeDeren Wu
support new node for WW regulatory domain Tested-by: Michael Lo <michael.lo@mediatek.com> Signed-off-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-02-03wifi: mt76: mt76x0u: report firmware version through ethtoolLorenzo Bianconi
Run mt76x02_set_ethtool_fwver utility routine in mt76x0u_load_firmware() in order to report firmware version through ethtool Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-02-03thermal: intel: quark_dts: Use generic trip pointsDaniel Lezcano
Make the intel_quark_dts_thermal driver register an array of generic trip points along with the thermal zone and drop the trip points thermal zone callbacks that are not used any more from it. Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org> [ rjw: Subject and changelog edits ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-02-03thermal: intel: powerclamp: Use powercap idle-inject featureSrinivas Pandruvada
There are two idle injection implementation in the Linux kernel. One via intel_powerclamp and the other using powercap/idle_inject. Both implementation end up in calling play_idle* function from a FIFO priority thread. Both can't be used at the same time. It is better to use one idle injection framework for better maintainability. In this way, there is only one caller for play_idle. Here powercap/idle_inject can be used for both per-core and for system wide idle injection. This framework has a well defined interface which allow registry for per-core or for all CPUs (system wide). This reduces code complexity in the intel powerclamp driver as all the per CPU kthreads, delayed work and calls to play_idle can be removed. The changes include: - Remove unneeded include files - Remove per CPU kthread workers: balancing_work and idle_injection_work. - Reuse the compensation related code by moving from previous worker thread to idle_injection callback. - Adjust the idle_duration and runtime by using powercap/idle_inject interface. - Remove all variables, which are not required once powercap/idle_inject is used. - Add mutex to avoid race during removal of idle injection during module unload and user action to change idle inject percent. Also for protection during dynamic adjustment of run and idle time from update() callback. - Remove online/offline callbacks to designate control CPU - Use cpu_present_mask global variable for CPU mask - Remove hot plug locks Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-02-03wifi: mt76: mt7915: complete wed reset supportLorenzo Bianconi
Stop Wireless Ethernet Dispatcher during mt7915 reset procedure. Tested-by: Daniel Golle <daniel@makrotopia.org> Co-developed-by: Sujuan Chen <sujuan.chen@mediatek.com> Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-02-03wifi: mt76: mt7915: add mt7915 wed reset callbacksLorenzo Bianconi
Introduce mt7915_mmio_wed_reset_complete and mt7915_mmio_wed_reset_complete callbacks and the related wait queues in order to wait for wed reset completion during wlan reset. Tested-by: Daniel Golle <daniel@makrotopia.org> Co-developed-by: Sujuan Chen <sujuan.chen@mediatek.com> Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-02-03wifi: mt76: dma: reset wed queues in mt76_dma_rx_resetSujuan Chen
This is a preliminary patch to introduce proper wed reset support. Tested-by: Daniel Golle <daniel@makrotopia.org> Co-developed-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-02-03wifi: mt76: dma: add reset to mt76_dma_wed_setup signatureSujuan Chen
Export mt76_dma_wed_setup routine. This is a preliminary patch to introduce proper wed reset support. Tested-by: Daniel Golle <daniel@makrotopia.org> Co-developed-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-02-03wifi: mt76: mt7996: add EHT beamforming supportMeiChia Chiu
Add mt7996_mcu_sta_bfer_eht() and related capability checks. Signed-off-by: MeiChia Chiu <meichia.chiu@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-02-03wifi: mt76: mt7996: enable EHT support in firmwareShayne Chen
Add sta_rec_eht command and extend phymode setting. Co-developed-by: Peter Chiu <chui-hao.chiu@mediatek.com> Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-02-03wifi: mt76: mt7996: add support for EHT rate reportShayne Chen
Currenly only EHT TX rate report is supported. EHT RX rate is temporally reported with HE rate. Co-developed-by: MeiChia Chiu <meichia.chiu@mediatek.com> Signed-off-by: MeiChia Chiu <meichia.chiu@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-02-03wifi: mt76: mt7996: add EHT capability initShayne Chen
Add EHT mac and phy capability init for mt7996 chipsets. Co-developed-by: Peter Chiu <chui-hao.chiu@mediatek.com> Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com> Co-developed-by: MeiChia Chiu <meichia.chiu@mediatek.com> Signed-off-by: MeiChia Chiu <meichia.chiu@mediatek.com> Co-developed-by: Bo Jiao <Bo.Jiao@mediatek.com> Signed-off-by: Bo Jiao <Bo.Jiao@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-02-03wifi: mt76: mt7996: rework capability initShayne Chen
Rework and extract common code of capability init for the preparation of adding EHT capability. Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-02-03wifi: mt76: mt7996: add helpers for wtbl and interface limitShayne Chen
Add helpers to get the maximum wtbl size and interface num based on hw caps. Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-02-03wifi: mt76: mt7996: add variants supportShayne Chen
There are variants of mt7996 which are different from eht supported and wtbl size limit. Get the hw caps with CHIP_CONFIG command. Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-02-03wifi: mt76: add EHT rate stats for ethtoolShayne Chen
Add support to get EHT rate stats from ethtool. This is the preliminary patch to add EHT support for mt7996. Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-02-03wifi: mt76: increase wcid size to 1088Shayne Chen
Increase wcid size to support up to 1024 station hw entries and 64 bcast/mcast hw entries. This is the preliminary patch to add EHT support for mt7996. Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-02-03wifi: mt76: connac: add cmd id related to EHT supportShayne Chen
This is the preliminary patch to add EHT support for mt7996. Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-02-03wifi: mt76: connac: add helpers for EHT capabilityShayne Chen
Add helpers to get eht cap and phymode on different bands and vifs. This is the preliminary patch to add EHT support for mt7996. Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-02-03wifi: mt76: connac: add CMD_CBW_320MHZShayne Chen
Add CMD_CBW_320MHZ for setting bandwidth 320 MHz to firmware. This is the preliminary patch to add EHT support for mt7996. Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-02-03wifi: mt76: add EHT phy typeShayne Chen
Extend phy type and phymode bitfields for EHT support. This is the preliminary patch to add EHT support for mt7996. Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-02-03wifi: mt76: remove __mt76_mcu_restart macroLorenzo Bianconi
__mt76_mcu_restart is no longer used Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-02-03wifi: mt76: mt7996: avoid mcu_restart function pointerLorenzo Bianconi
Run mt7996_mcu_restart routine directly and avoid mcu_restart function pointer whenever it is possible. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-02-03wifi: mt76: mt7996: rely on mt76_connac_tx_complete_skbLorenzo Bianconi
Drop mt7996_tx_complete_skb routine since it is equivalent to mt76_connac_tx_complete_skb(). Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-02-03wifi: mt76: mt7996: rely on mt76_connac_txp_skb_unmapLorenzo Bianconi
Drop mt7996_txp_skb_unmap routine since it is equivalent to mt76_connac_txp_skb_unmap(). Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-02-03wifi: mt76: mt7996: rely on mt76_connac_txp_common structureLorenzo Bianconi
mt7996_txp structure is equal to mt76_connac_fw_txp one. Drop mt7996_txp and rely on mt76_connac_txp_common. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-02-03wifi: mt76: mt7996: rely on mt76_connac2_mac_tx_rate_valLorenzo Bianconi
In order to fix a possible NULL pointer dereference in mt7996_mac_write_txwi() of vif pointer, export mt76_connac2_mac_tx_rate_val utility routine and reuse it in mt7996 driver. Fixes: 98686cd21624 ("wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-02-03wifi: mt76: mt7921: fix error code of return in mt7921_acpi_readAaron Ma
Kernel NULL pointer dereference when ACPI SAR table isn't implemented well. Fix the error code of return to mark the ACPI SAR table as invalid. [ 5.077128] mt7921e 0000:06:00.0: sar cnt = 0 [ 5.077381] BUG: kernel NULL pointer dereference, address: 0000000000000004 [ 5.077630] #PF: supervisor read access in kernel mode [ 5.077883] #PF: error_code(0x0000) - not-present page [ 5.078138] PGD 0 P4D 0 [ 5.078398] Oops: 0000 [#1] PREEMPT SMP NOPTI [ 5.079202] RIP: 0010:mt7921_init_acpi_sar+0x106/0x220 [mt7921_common] ... [ 5.080786] Call Trace: [ 5.080786] <TASK> [ 5.080786] mt7921_register_device+0x37d/0x490 [mt7921_common] [ 5.080786] mt7921_pci_probe.part.0+0x2ee/0x310 [mt7921e] [ 5.080786] mt7921_pci_probe+0x52/0x70 [mt7921e] [ 5.080786] local_pci_probe+0x47/0x90 [ 5.080786] pci_call_probe+0x55/0x190 [ 5.080786] pci_device_probe+0x84/0x120 Fixes: f965333e491e ("mt76: mt7921: introduce ACPI SAR support") Signed-off-by: Aaron Ma <aaron.ma@canonical.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-02-03wifi: mt76: mt7915: release rxwi in mt7915_wed_release_rx_bufSujuan Chen
Free rxwi cache releasing WED rx buffers in mt7915_wed_release_rx_buf routine Tested-by: Daniel Golle <daniel@makrotopia.org> Co-developed-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-02-03wifi: mt76: enable page_pool statsLorenzo Bianconi
Enable page_pool ethtool statistics for mt7915 and mt7921 chipsets. Tested-by: Felix Fietkau <nbd@nbd.name> Tested-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-02-03wifi: mt76: switch to page_pool allocatorLorenzo Bianconi
In order to reduce possible memory allocation failures due to memory fragmentation caused by page_frag_cache allocator, switch to page_pool allocator for dma and usb mt76 drivers. Remove per rx-queue page_frag_cache Co-developed-by: Felix Fietkau <nbd@nbd.name> Tested-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-02-03wifi: mt76: mt7915: fix memory leak in mt7915_mmio_wed_init_rx_bufLorenzo Bianconi
Free mt76_txwi_cache pointer in mt7915_mmio_wed_init_rx_buf routine in case of failure. Fixes: 4f831d18d12d ("wifi: mt76: mt7915: enable WED RX support") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-02-03wifi: mt76: mt7921: fix rx filter incorrect by drv/fw inconsistentNeil Chen
The rx filter, in mt7921 series, may be changed in fw operation. There is a racing problem if rx filter controlled by both driver and firmware at the same time. To avoid this issue, let mt7921 driver set rx filter by new command MCU_CE_CMD_SET_RX_FILTER and allow the firmware controlling it only. Reviewed-by: Lorenzo Bianconi <lorenzo@kernel.org> Co-developed-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Neil Chen <yn.chen@mediatek.com> Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-02-03wifi: mt76: add memory barrier to SDIO queue kickDeren Wu
Ensure the entry has been fully updated before SDIO bus worker access it. This patch would fix potential memory risk in both mt7663s and mt7921s. Fixes: 764dee47e2c1 ("mt76: sdio: move common code in mt76_sdio module") Signed-off-by: Deren Wu <deren.wu@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-02-03wifi: mt76: mt7921: reduce polling time in pmctrlDeren Wu
Due to the polling tick is 10ms, the wake up flow in the status waiting would cause more 10~20ms than the real HW response time. Reduce tick-interval from 10ms to 1ms to get better network performance, such as ping latency, in low power mode. Reviewed-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-02-03wifi: mt76: add flexible polling wait-interval supportDeren Wu
The default waiting unit is 10ms and the value is too much for data path related control. Provide a new API mt76_poll_msec_tick() to support different cases, such as 1ms polling waiting kick. Reviewed-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-02-03wifi: mt76: mt7915: fix WED TxS reportingRyder Lee
The previous commit forgot to remove a leftover check. Fixes: 43eaa3689507 ("wifi: mt76: add PPDU based TxS support for WED device") Reported-By: Sujuan Chen <sujuan.chen@mediatek.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
generated by cgit (git 2.34.1) at 2025-09-23 08:13:09 +0000