summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2025-01-18octeon_ep_vf: update tx/rx stats locally for persistenceShinas Rasheed
Update tx/rx stats locally, so that ndo_get_stats64() can use that and not rely on per queue resources to obtain statistics. The latter used to cause race conditions when the device stopped. Signed-off-by: Shinas Rasheed <srasheed@marvell.com> Link: https://patch.msgid.link/20250117094653.2588578-5-srasheed@marvell.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-18octeon_ep_vf: remove firmware stats fetch in ndo_get_stats64Shinas Rasheed
The firmware stats fetch call that happens in ndo_get_stats64() is currently not required, and causes a warning to issue. The corresponding warn log for the PF is given below: [ 123.316837] ------------[ cut here ]------------ [ 123.316840] Voluntary context switch within RCU read-side critical section! [ 123.316917] pc : rcu_note_context_switch+0x2e4/0x300 [ 123.316919] lr : rcu_note_context_switch+0x2e4/0x300 [ 123.316947] Call trace: [ 123.316949] rcu_note_context_switch+0x2e4/0x300 [ 123.316952] __schedule+0x84/0x584 [ 123.316955] schedule+0x38/0x90 [ 123.316956] schedule_timeout+0xa0/0x1d4 [ 123.316959] octep_send_mbox_req+0x190/0x230 [octeon_ep] [ 123.316966] octep_ctrl_net_get_if_stats+0x78/0x100 [octeon_ep] [ 123.316970] octep_get_stats64+0xd4/0xf0 [octeon_ep] [ 123.316975] dev_get_stats+0x4c/0x114 [ 123.316977] dev_seq_printf_stats+0x3c/0x11c [ 123.316980] dev_seq_show+0x1c/0x40 [ 123.316982] seq_read_iter+0x3cc/0x4e0 [ 123.316985] seq_read+0xc8/0x110 [ 123.316987] proc_reg_read+0x9c/0xec [ 123.316990] vfs_read+0xc8/0x2ec [ 123.316993] ksys_read+0x70/0x100 [ 123.316995] __arm64_sys_read+0x20/0x30 [ 123.316997] invoke_syscall.constprop.0+0x7c/0xd0 [ 123.317000] do_el0_svc+0xb4/0xd0 [ 123.317002] el0_svc+0xe8/0x1f4 [ 123.317005] el0t_64_sync_handler+0x134/0x150 [ 123.317006] el0t_64_sync+0x17c/0x180 [ 123.317008] ---[ end trace 63399811432ab69b ]--- Fixes: c3fad23cdc06 ("octeon_ep_vf: add support for ndo ops") Signed-off-by: Shinas Rasheed <srasheed@marvell.com> Link: https://patch.msgid.link/20250117094653.2588578-4-srasheed@marvell.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-18octeon_ep: update tx/rx stats locally for persistenceShinas Rasheed
Update tx/rx stats locally, so that ndo_get_stats64() can use that and not rely on per queue resources to obtain statistics. The latter used to cause race conditions when the device stopped. Signed-off-by: Shinas Rasheed <srasheed@marvell.com> Link: https://patch.msgid.link/20250117094653.2588578-3-srasheed@marvell.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-18octeon_ep: remove firmware stats fetch in ndo_get_stats64Shinas Rasheed
The firmware stats fetch call that happens in ndo_get_stats64() is currently not required, and causes a warning to issue. The warn log is given below: [ 123.316837] ------------[ cut here ]------------ [ 123.316840] Voluntary context switch within RCU read-side critical section! [ 123.316917] pc : rcu_note_context_switch+0x2e4/0x300 [ 123.316919] lr : rcu_note_context_switch+0x2e4/0x300 [ 123.316947] Call trace: [ 123.316949] rcu_note_context_switch+0x2e4/0x300 [ 123.316952] __schedule+0x84/0x584 [ 123.316955] schedule+0x38/0x90 [ 123.316956] schedule_timeout+0xa0/0x1d4 [ 123.316959] octep_send_mbox_req+0x190/0x230 [octeon_ep] [ 123.316966] octep_ctrl_net_get_if_stats+0x78/0x100 [octeon_ep] [ 123.316970] octep_get_stats64+0xd4/0xf0 [octeon_ep] [ 123.316975] dev_get_stats+0x4c/0x114 [ 123.316977] dev_seq_printf_stats+0x3c/0x11c [ 123.316980] dev_seq_show+0x1c/0x40 [ 123.316982] seq_read_iter+0x3cc/0x4e0 [ 123.316985] seq_read+0xc8/0x110 [ 123.316987] proc_reg_read+0x9c/0xec [ 123.316990] vfs_read+0xc8/0x2ec [ 123.316993] ksys_read+0x70/0x100 [ 123.316995] __arm64_sys_read+0x20/0x30 [ 123.316997] invoke_syscall.constprop.0+0x7c/0xd0 [ 123.317000] do_el0_svc+0xb4/0xd0 [ 123.317002] el0_svc+0xe8/0x1f4 [ 123.317005] el0t_64_sync_handler+0x134/0x150 [ 123.317006] el0t_64_sync+0x17c/0x180 [ 123.317008] ---[ end trace 63399811432ab69b ]--- Fixes: 6a610a46bad1 ("octeon_ep: add support for ndo ops") Signed-off-by: Shinas Rasheed <srasheed@marvell.com> Link: https://patch.msgid.link/20250117094653.2588578-2-srasheed@marvell.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-17net/mlxfw: Drop hard coded max FW flash image sizeMaher Sanalla
Currently, mlxfw kernel module limits FW flash image size to be 10MB at most, preventing the ability to burn recent BlueField-3 FW that exceeds the said size limit. Thus, drop the hard coded limit. Instead, rely on FW's max_component_size threshold that is reported in MCQI register as the size limit for FW image. Fixes: 410ed13cae39 ("Add the mlxfw module for Mellanox firmware flash process") Signed-off-by: Maher Sanalla <msanalla@nvidia.com> Signed-off-by: Moshe Shemesh <moshe@nvidia.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Tested-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Link: https://patch.msgid.link/1737030796-1441634-1-git-send-email-moshe@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-17net: phy: realtek: always clear NBase-T lpaDaniel Golle
Clear NBase-T link partner advertisement before calling rtlgen_read_status() to avoid phy_resolve_aneg_linkmode() wrongly setting speed and duplex. This fixes bogus 2.5G/5G/10G link partner advertisement and thus speed and duplex being set by phy_resolve_aneg_linkmode() due to stale NBase-T lpa. Fixes: 68d5cd09e891 ("net: phy: realtek: change order of calls in C22 read_status()") Signed-off-by: Daniel Golle <daniel@makrotopia.org> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2025-01-17net: phy: realtek: clear master_slave_state if link is downDaniel Golle
rtlgen_decode_physr() which sets master_slave_state isn't called in case the link is down and other than rtlgen_read_status(), rtl822x_c45_read_status() doesn't implicitely clear master_slave_state. Avoid stale master_slave_state by always setting it to MASTER_SLAVE_STATE_UNKNOWN in rtl822x_c45_read_status() in case the link is down. Fixes: 081c9c0265c9 ("net: phy: realtek: read duplex and gbit master from PHYSR register") Signed-off-by: Daniel Golle <daniel@makrotopia.org> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2025-01-17net: phy: realtek: clear 1000Base-T lpa if link is downDaniel Golle
Only read 1000Base-T link partner advertisement if autonegotiation has completed and otherwise 1000Base-T link partner advertisement bits. This fixes bogus 1000Base-T link partner advertisement after link goes down (eg. by disconnecting the wire). Fixes: 5cb409b3960e ("net: phy: realtek: clear 1000Base-T link partner advertisement") Signed-off-by: Daniel Golle <daniel@makrotopia.org> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2025-01-16Merge tag 'net-6.13-rc8' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Paolo Abeni: "Notably this includes fixes for a few regressions spotted very recently. No known outstanding ones. Current release - regressions: - core: avoid CFI problems with sock priv helpers - xsk: bring back busy polling support - netpoll: ensure skb_pool list is always initialized Current release - new code bugs: - core: make page_pool_ref_netmem work with net iovs - ipv4: route: fix drop reason being overridden in ip_route_input_slow - udp: make rehash4 independent in udp_lib_rehash() Previous releases - regressions: - bpf: fix bpf_sk_select_reuseport() memory leak - openvswitch: fix lockup on tx to unregistering netdev with carrier - mptcp: be sure to send ack when mptcp-level window re-opens - eth: - bnxt: always recalculate features after XDP clearing, fix null-deref - mlx5: fix sub-function add port error handling - fec: handle page_pool_dev_alloc_pages error Previous releases - always broken: - vsock: some fixes due to transport de-assignment - eth: - ice: fix E825 initialization - mlx5e: fix inversion dependency warning while enabling IPsec tunnel - gtp: destroy device along with udp socket's netns dismantle. - xilinx: axienet: Fix IRQ coalescing packet count overflow" * tag 'net-6.13-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (44 commits) netdev: avoid CFI problems with sock priv helpers net/mlx5e: Always start IPsec sequence number from 1 net/mlx5e: Rely on reqid in IPsec tunnel mode net/mlx5e: Fix inversion dependency warning while enabling IPsec tunnel net/mlx5: Clear port select structure when fail to create net/mlx5: SF, Fix add port error handling net/mlx5: Fix a lockdep warning as part of the write combining test net/mlx5: Fix RDMA TX steering prio net: make page_pool_ref_netmem work with net iovs net: ethernet: xgbe: re-add aneg to supported features in PHY quirks net: pcs: xpcs: actively unset DW_VR_MII_DIG_CTRL1_2G5_EN for 1G SGMII net: pcs: xpcs: fix DW_VR_MII_DIG_CTRL1_2G5_EN bit being set for 1G SGMII w/o inband selftests: net: Adapt ethtool mq tests to fix in qdisc graft net: fec: handle page_pool_dev_alloc_pages error net: netpoll: ensure skb_pool list is always initialized net: xilinx: axienet: Fix IRQ coalescing packet count overflow nfp: bpf: prevent integer overflow in nfp_bpf_event_output() selftests: mptcp: avoid spurious errors on disconnect mptcp: fix spurious wake-up on under memory pressure mptcp: be sure to send ack when mptcp-level window re-opens ...
2025-01-16Merge tag 'pm-6.13-rc8' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fixes from Rafael Wysocki: "Update the documentation of cpuidle governors that does not match the code any more after previous functional changes (Rafael Wysocki) and fix up the cpufreq Kconfig file broken inadvertently by a previous update (Viresh Kumar)" * tag 'pm-6.13-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: cpufreq: Move endif to the end of Kconfig file cpuidle: teo: Update documentation after previous changes cpuidle: menu: Update documentation after previous changes
2025-01-16Merge tag 'acpi-6.13-rc8' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI fix from Rafael Wysocki: "Prevent acpi_video_device_EDID() from returning a pointer to a memory region that should not be passed to kfree() which causes one of its users to crash randomly on attempts to free it (Chris Bainbridge)" * tag 'acpi-6.13-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI: video: Fix random crashes due to bad kfree()
2025-01-16Merge branch 'pm-cpufreq'Rafael J. Wysocki
Merge a cpufreq fix for 6.13: - Fix cpufreq Kconfig breakage after previous changes (Viresh Kumar). * pm-cpufreq: cpufreq: Move endif to the end of Kconfig file
2025-01-16net/mlx5e: Always start IPsec sequence number from 1Leon Romanovsky
According to RFC4303, section "3.3.3. Sequence Number Generation", the first packet sent using a given SA will contain a sequence number of 1. This is applicable to both ESN and non-ESN mode, which was not covered in commit mentioned in Fixes line. Fixes: 3d42c8cc67a8 ("net/mlx5e: Ensure that IPsec sequence packet number starts from 1") Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-01-16net/mlx5e: Rely on reqid in IPsec tunnel modeLeon Romanovsky
All packet offloads SAs have reqid in it to make sure they have corresponding policy. While it is not strictly needed for transparent mode, it is extremely important in tunnel mode. In that mode, policy and SAs have different match criteria. Policy catches the whole subnet addresses, and SA catches the tunnel gateways addresses. The source address of such tunnel is not known during egress packet traversal in flow steering as it is added only after successful encryption. As reqid is required for packet offload and it is unique for every SA, we can safely rely on it only. The output below shows the configured egress policy and SA by strongswan: [leonro@vm ~]$ sudo ip x s src 192.169.101.2 dst 192.169.101.1 proto esp spi 0xc88b7652 reqid 1 mode tunnel replay-window 0 flag af-unspec esn aead rfc4106(gcm(aes)) 0xe406a01083986e14d116488549094710e9c57bc6 128 anti-replay esn context: seq-hi 0x0, seq 0x0, oseq-hi 0x0, oseq 0x0 replay_window 1, bitmap-length 1 00000000 crypto offload parameters: dev eth2 dir out mode packet [leonro@064 ~]$ sudo ip x p src 192.170.0.0/16 dst 192.170.0.0/16 dir out priority 383615 ptype main tmpl src 192.169.101.2 dst 192.169.101.1 proto esp spi 0xc88b7652 reqid 1 mode tunnel crypto offload parameters: dev eth2 mode packet Fixes: b3beba1fb404 ("net/mlx5e: Allow policies with reqid 0, to support IKE policy holes") Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-01-16net/mlx5e: Fix inversion dependency warning while enabling IPsec tunnelLeon Romanovsky
Attempt to enable IPsec packet offload in tunnel mode in debug kernel generates the following kernel panic, which is happening due to two issues: 1. In SA add section, the should be _bh() variant when marking SA mode. 2. There is not needed flush_workqueue in SA delete routine. It is not needed as at this stage as it is removed from SADB and the running work will be canceled later in SA free. ===================================================== WARNING: SOFTIRQ-safe -> SOFTIRQ-unsafe lock order detected 6.12.0+ #4 Not tainted ----------------------------------------------------- charon/1337 [HC0[0]:SC0[4]:HE1:SE0] is trying to acquire: ffff88810f365020 (&xa->xa_lock#24){+.+.}-{3:3}, at: mlx5e_xfrm_del_state+0xca/0x1e0 [mlx5_core] and this task is already holding: ffff88813e0f0d48 (&x->lock){+.-.}-{3:3}, at: xfrm_state_delete+0x16/0x30 which would create a new lock dependency: (&x->lock){+.-.}-{3:3} -> (&xa->xa_lock#24){+.+.}-{3:3} but this new dependency connects a SOFTIRQ-irq-safe lock: (&x->lock){+.-.}-{3:3} ... which became SOFTIRQ-irq-safe at: lock_acquire+0x1be/0x520 _raw_spin_lock_bh+0x34/0x40 xfrm_timer_handler+0x91/0xd70 __hrtimer_run_queues+0x1dd/0xa60 hrtimer_run_softirq+0x146/0x2e0 handle_softirqs+0x266/0x860 irq_exit_rcu+0x115/0x1a0 sysvec_apic_timer_interrupt+0x6e/0x90 asm_sysvec_apic_timer_interrupt+0x16/0x20 default_idle+0x13/0x20 default_idle_call+0x67/0xa0 do_idle+0x2da/0x320 cpu_startup_entry+0x50/0x60 start_secondary+0x213/0x2a0 common_startup_64+0x129/0x138 to a SOFTIRQ-irq-unsafe lock: (&xa->xa_lock#24){+.+.}-{3:3} ... which became SOFTIRQ-irq-unsafe at: ... lock_acquire+0x1be/0x520 _raw_spin_lock+0x2c/0x40 xa_set_mark+0x70/0x110 mlx5e_xfrm_add_state+0xe48/0x2290 [mlx5_core] xfrm_dev_state_add+0x3bb/0xd70 xfrm_add_sa+0x2451/0x4a90 xfrm_user_rcv_msg+0x493/0x880 netlink_rcv_skb+0x12e/0x380 xfrm_netlink_rcv+0x6d/0x90 netlink_unicast+0x42f/0x740 netlink_sendmsg+0x745/0xbe0 __sock_sendmsg+0xc5/0x190 __sys_sendto+0x1fe/0x2c0 __x64_sys_sendto+0xdc/0x1b0 do_syscall_64+0x6d/0x140 entry_SYSCALL_64_after_hwframe+0x4b/0x53 other info that might help us debug this: Possible interrupt unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&xa->xa_lock#24); local_irq_disable(); lock(&x->lock); lock(&xa->xa_lock#24); <Interrupt> lock(&x->lock); *** DEADLOCK *** 2 locks held by charon/1337: #0: ffffffff87f8f858 (&net->xfrm.xfrm_cfg_mutex){+.+.}-{4:4}, at: xfrm_netlink_rcv+0x5e/0x90 #1: ffff88813e0f0d48 (&x->lock){+.-.}-{3:3}, at: xfrm_state_delete+0x16/0x30 the dependencies between SOFTIRQ-irq-safe lock and the holding lock: -> (&x->lock){+.-.}-{3:3} ops: 29 { HARDIRQ-ON-W at: lock_acquire+0x1be/0x520 _raw_spin_lock_bh+0x34/0x40 xfrm_alloc_spi+0xc0/0xe60 xfrm_alloc_userspi+0x5f6/0xbc0 xfrm_user_rcv_msg+0x493/0x880 netlink_rcv_skb+0x12e/0x380 xfrm_netlink_rcv+0x6d/0x90 netlink_unicast+0x42f/0x740 netlink_sendmsg+0x745/0xbe0 __sock_sendmsg+0xc5/0x190 __sys_sendto+0x1fe/0x2c0 __x64_sys_sendto+0xdc/0x1b0 do_syscall_64+0x6d/0x140 entry_SYSCALL_64_after_hwframe+0x4b/0x53 IN-SOFTIRQ-W at: lock_acquire+0x1be/0x520 _raw_spin_lock_bh+0x34/0x40 xfrm_timer_handler+0x91/0xd70 __hrtimer_run_queues+0x1dd/0xa60 hrtimer_run_softirq+0x146/0x2e0 handle_softirqs+0x266/0x860 irq_exit_rcu+0x115/0x1a0 sysvec_apic_timer_interrupt+0x6e/0x90 asm_sysvec_apic_timer_interrupt+0x16/0x20 default_idle+0x13/0x20 default_idle_call+0x67/0xa0 do_idle+0x2da/0x320 cpu_startup_entry+0x50/0x60 start_secondary+0x213/0x2a0 common_startup_64+0x129/0x138 INITIAL USE at: lock_acquire+0x1be/0x520 _raw_spin_lock_bh+0x34/0x40 xfrm_alloc_spi+0xc0/0xe60 xfrm_alloc_userspi+0x5f6/0xbc0 xfrm_user_rcv_msg+0x493/0x880 netlink_rcv_skb+0x12e/0x380 xfrm_netlink_rcv+0x6d/0x90 netlink_unicast+0x42f/0x740 netlink_sendmsg+0x745/0xbe0 __sock_sendmsg+0xc5/0x190 __sys_sendto+0x1fe/0x2c0 __x64_sys_sendto+0xdc/0x1b0 do_syscall_64+0x6d/0x140 entry_SYSCALL_64_after_hwframe+0x4b/0x53 } ... key at: [<ffffffff87f9cd20>] __key.18+0x0/0x40 the dependencies between the lock to be acquired and SOFTIRQ-irq-unsafe lock: -> (&xa->xa_lock#24){+.+.}-{3:3} ops: 9 { HARDIRQ-ON-W at: lock_acquire+0x1be/0x520 _raw_spin_lock_bh+0x34/0x40 mlx5e_xfrm_add_state+0xc5b/0x2290 [mlx5_core] xfrm_dev_state_add+0x3bb/0xd70 xfrm_add_sa+0x2451/0x4a90 xfrm_user_rcv_msg+0x493/0x880 netlink_rcv_skb+0x12e/0x380 xfrm_netlink_rcv+0x6d/0x90 netlink_unicast+0x42f/0x740 netlink_sendmsg+0x745/0xbe0 __sock_sendmsg+0xc5/0x190 __sys_sendto+0x1fe/0x2c0 __x64_sys_sendto+0xdc/0x1b0 do_syscall_64+0x6d/0x140 entry_SYSCALL_64_after_hwframe+0x4b/0x53 SOFTIRQ-ON-W at: lock_acquire+0x1be/0x520 _raw_spin_lock+0x2c/0x40 xa_set_mark+0x70/0x110 mlx5e_xfrm_add_state+0xe48/0x2290 [mlx5_core] xfrm_dev_state_add+0x3bb/0xd70 xfrm_add_sa+0x2451/0x4a90 xfrm_user_rcv_msg+0x493/0x880 netlink_rcv_skb+0x12e/0x380 xfrm_netlink_rcv+0x6d/0x90 netlink_unicast+0x42f/0x740 netlink_sendmsg+0x745/0xbe0 __sock_sendmsg+0xc5/0x190 __sys_sendto+0x1fe/0x2c0 __x64_sys_sendto+0xdc/0x1b0 do_syscall_64+0x6d/0x140 entry_SYSCALL_64_after_hwframe+0x4b/0x53 INITIAL USE at: lock_acquire+0x1be/0x520 _raw_spin_lock_bh+0x34/0x40 mlx5e_xfrm_add_state+0xc5b/0x2290 [mlx5_core] xfrm_dev_state_add+0x3bb/0xd70 xfrm_add_sa+0x2451/0x4a90 xfrm_user_rcv_msg+0x493/0x880 netlink_rcv_skb+0x12e/0x380 xfrm_netlink_rcv+0x6d/0x90 netlink_unicast+0x42f/0x740 netlink_sendmsg+0x745/0xbe0 __sock_sendmsg+0xc5/0x190 __sys_sendto+0x1fe/0x2c0 __x64_sys_sendto+0xdc/0x1b0 do_syscall_64+0x6d/0x140 entry_SYSCALL_64_after_hwframe+0x4b/0x53 } ... key at: [<ffffffffa078ff60>] __key.48+0x0/0xfffffffffff210a0 [mlx5_core] ... acquired at: __lock_acquire+0x30a0/0x5040 lock_acquire+0x1be/0x520 _raw_spin_lock_bh+0x34/0x40 mlx5e_xfrm_del_state+0xca/0x1e0 [mlx5_core] xfrm_dev_state_delete+0x90/0x160 __xfrm_state_delete+0x662/0xae0 xfrm_state_delete+0x1e/0x30 xfrm_del_sa+0x1c2/0x340 xfrm_user_rcv_msg+0x493/0x880 netlink_rcv_skb+0x12e/0x380 xfrm_netlink_rcv+0x6d/0x90 netlink_unicast+0x42f/0x740 netlink_sendmsg+0x745/0xbe0 __sock_sendmsg+0xc5/0x190 __sys_sendto+0x1fe/0x2c0 __x64_sys_sendto+0xdc/0x1b0 do_syscall_64+0x6d/0x140 entry_SYSCALL_64_after_hwframe+0x4b/0x53 stack backtrace: CPU: 7 UID: 0 PID: 1337 Comm: charon Not tainted 6.12.0+ #4 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x74/0xd0 check_irq_usage+0x12e8/0x1d90 ? print_shortest_lock_dependencies_backwards+0x1b0/0x1b0 ? check_chain_key+0x1bb/0x4c0 ? __lockdep_reset_lock+0x180/0x180 ? check_path.constprop.0+0x24/0x50 ? mark_lock+0x108/0x2fb0 ? print_circular_bug+0x9b0/0x9b0 ? mark_lock+0x108/0x2fb0 ? print_usage_bug.part.0+0x670/0x670 ? check_prev_add+0x1c4/0x2310 check_prev_add+0x1c4/0x2310 __lock_acquire+0x30a0/0x5040 ? lockdep_set_lock_cmp_fn+0x190/0x190 ? lockdep_set_lock_cmp_fn+0x190/0x190 lock_acquire+0x1be/0x520 ? mlx5e_xfrm_del_state+0xca/0x1e0 [mlx5_core] ? lockdep_hardirqs_on_prepare+0x400/0x400 ? __xfrm_state_delete+0x5f0/0xae0 ? lock_downgrade+0x6b0/0x6b0 _raw_spin_lock_bh+0x34/0x40 ? mlx5e_xfrm_del_state+0xca/0x1e0 [mlx5_core] mlx5e_xfrm_del_state+0xca/0x1e0 [mlx5_core] xfrm_dev_state_delete+0x90/0x160 __xfrm_state_delete+0x662/0xae0 xfrm_state_delete+0x1e/0x30 xfrm_del_sa+0x1c2/0x340 ? xfrm_get_sa+0x250/0x250 ? check_chain_key+0x1bb/0x4c0 xfrm_user_rcv_msg+0x493/0x880 ? copy_sec_ctx+0x270/0x270 ? check_chain_key+0x1bb/0x4c0 ? lockdep_set_lock_cmp_fn+0x190/0x190 ? lockdep_set_lock_cmp_fn+0x190/0x190 netlink_rcv_skb+0x12e/0x380 ? copy_sec_ctx+0x270/0x270 ? netlink_ack+0xd90/0xd90 ? netlink_deliver_tap+0xcd/0xb60 xfrm_netlink_rcv+0x6d/0x90 netlink_unicast+0x42f/0x740 ? netlink_attachskb+0x730/0x730 ? lock_acquire+0x1be/0x520 netlink_sendmsg+0x745/0xbe0 ? netlink_unicast+0x740/0x740 ? __might_fault+0xbb/0x170 ? netlink_unicast+0x740/0x740 __sock_sendmsg+0xc5/0x190 ? fdget+0x163/0x1d0 __sys_sendto+0x1fe/0x2c0 ? __x64_sys_getpeername+0xb0/0xb0 ? do_user_addr_fault+0x856/0xe30 ? lock_acquire+0x1be/0x520 ? __task_pid_nr_ns+0x117/0x410 ? lock_downgrade+0x6b0/0x6b0 __x64_sys_sendto+0xdc/0x1b0 ? lockdep_hardirqs_on_prepare+0x284/0x400 do_syscall_64+0x6d/0x140 entry_SYSCALL_64_after_hwframe+0x4b/0x53 RIP: 0033:0x7f7d31291ba4 Code: 7d e8 89 4d d4 e8 4c 42 f7 ff 44 8b 4d d0 4c 8b 45 c8 89 c3 44 8b 55 d4 8b 7d e8 b8 2c 00 00 00 48 8b 55 d8 48 8b 75 e0 0f 05 <48> 3d 00 f0 ff ff 77 34 89 df 48 89 45 e8 e8 99 42 f7 ff 48 8b 45 RSP: 002b:00007f7d2ccd94f0 EFLAGS: 00000297 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 0000000000000001 RCX: 00007f7d31291ba4 RDX: 0000000000000028 RSI: 00007f7d2ccd96a0 RDI: 000000000000000a RBP: 00007f7d2ccd9530 R08: 00007f7d2ccd9598 R09: 000000000000000c R10: 0000000000000000 R11: 0000000000000297 R12: 0000000000000028 R13: 00007f7d2ccd9598 R14: 00007f7d2ccd96a0 R15: 00000000000000e1 </TASK> Fixes: 4c24272b4e2b ("net/mlx5e: Listen to ARP events to update IPsec L2 headers in tunnel mode") Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-01-16net/mlx5: Clear port select structure when fail to createMark Zhang
Clear the port select structure on error so no stale values left after definers are destroyed. That's because the mlx5_lag_destroy_definers() always try to destroy all lag definers in the tt_map, so in the flow below lag definers get double-destroyed and cause kernel crash: mlx5_lag_port_sel_create() mlx5_lag_create_definers() mlx5_lag_create_definer() <- Failed on tt 1 mlx5_lag_destroy_definers() <- definers[tt=0] gets destroyed mlx5_lag_port_sel_create() mlx5_lag_create_definers() mlx5_lag_create_definer() <- Failed on tt 0 mlx5_lag_destroy_definers() <- definers[tt=0] gets double-destroyed Unable to handle kernel NULL pointer dereference at virtual address 0000000000000008 Mem abort info: ESR = 0x0000000096000005 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x05: level 1 translation fault Data abort info: ISV = 0, ISS = 0x00000005, ISS2 = 0x00000000 CM = 0, WnR = 0, TnD = 0, TagAccess = 0 GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 user pgtable: 64k pages, 48-bit VAs, pgdp=0000000112ce2e00 [0000000000000008] pgd=0000000000000000, p4d=0000000000000000, pud=0000000000000000 Internal error: Oops: 0000000096000005 [#1] PREEMPT SMP Modules linked in: iptable_raw bonding ip_gre ip6_gre gre ip6_tunnel tunnel6 geneve ip6_udp_tunnel udp_tunnel ipip tunnel4 ip_tunnel rdma_ucm(OE) rdma_cm(OE) iw_cm(OE) ib_ipoib(OE) ib_cm(OE) ib_umad(OE) mlx5_ib(OE) ib_uverbs(OE) mlx5_fwctl(OE) fwctl(OE) mlx5_core(OE) mlxdevm(OE) ib_core(OE) mlxfw(OE) memtrack(OE) mlx_compat(OE) openvswitch nsh nf_conncount psample xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink xfrm_user xfrm_algo xt_addrtype iptable_filter iptable_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 br_netfilter bridge stp llc netconsole overlay efi_pstore sch_fq_codel zram ip_tables crct10dif_ce qemu_fw_cfg fuse ipv6 crc_ccitt [last unloaded: mlx_compat(OE)] CPU: 3 UID: 0 PID: 217 Comm: kworker/u53:2 Tainted: G OE 6.11.0+ #2 Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODULE Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015 Workqueue: mlx5_lag mlx5_do_bond_work [mlx5_core] pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : mlx5_del_flow_rules+0x24/0x2c0 [mlx5_core] lr : mlx5_lag_destroy_definer+0x54/0x100 [mlx5_core] sp : ffff800085fafb00 x29: ffff800085fafb00 x28: ffff0000da0c8000 x27: 0000000000000000 x26: ffff0000da0c8000 x25: ffff0000da0c8000 x24: ffff0000da0c8000 x23: ffff0000c31f81a0 x22: 0400000000000000 x21: ffff0000da0c8000 x20: 0000000000000000 x19: 0000000000000001 x18: 0000000000000000 x17: 0000000000000000 x16: 0000000000000000 x15: 0000ffff8b0c9350 x14: 0000000000000000 x13: ffff800081390d18 x12: ffff800081dc3cc0 x11: 0000000000000001 x10: 0000000000000b10 x9 : ffff80007ab7304c x8 : ffff0000d00711f0 x7 : 0000000000000004 x6 : 0000000000000190 x5 : ffff00027edb3010 x4 : 0000000000000000 x3 : 0000000000000000 x2 : ffff0000d39b8000 x1 : ffff0000d39b8000 x0 : 0400000000000000 Call trace: mlx5_del_flow_rules+0x24/0x2c0 [mlx5_core] mlx5_lag_destroy_definer+0x54/0x100 [mlx5_core] mlx5_lag_destroy_definers+0xa0/0x108 [mlx5_core] mlx5_lag_port_sel_create+0x2d4/0x6f8 [mlx5_core] mlx5_activate_lag+0x60c/0x6f8 [mlx5_core] mlx5_do_bond_work+0x284/0x5c8 [mlx5_core] process_one_work+0x170/0x3e0 worker_thread+0x2d8/0x3e0 kthread+0x11c/0x128 ret_from_fork+0x10/0x20 Code: a9025bf5 aa0003f6 a90363f7 f90023f9 (f9400400) ---[ end trace 0000000000000000 ]--- Fixes: dc48516ec7d3 ("net/mlx5: Lag, add support to create definers for LAG") Signed-off-by: Mark Zhang <markzhang@nvidia.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Reviewed-by: Mark Bloch <mbloch@nvidia.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-01-16net/mlx5: SF, Fix add port error handlingChris Mi
If failed to add SF, error handling doesn't delete the SF from the SF table. But the hw resources are deleted. So when unload driver, hw resources will be deleted again. Firmware will report syndrome 0x68def3 which means "SF is not allocated can not deallocate". Fix it by delete SF from SF table if failed to add SF. Fixes: 2597ee190b4e ("net/mlx5: Call mlx5_sf_id_erase() once in mlx5_sf_dealloc()") Signed-off-by: Chris Mi <cmi@nvidia.com> Reviewed-by: Shay Drori <shayd@nvidia.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-01-16net/mlx5: Fix a lockdep warning as part of the write combining testYishai Hadas
Fix a lockdep warning [1] observed during the write combining test. The warning indicates a potential nested lock scenario that could lead to a deadlock. However, this is a false positive alarm because the SF lock and its parent lock are distinct ones. The lockdep confusion arises because the locks belong to the same object class (i.e., struct mlx5_core_dev). To resolve this, the code has been refactored to avoid taking both locks. Instead, only the parent lock is acquired. [1] raw_ethernet_bw/2118 is trying to acquire lock: [ 213.619032] ffff88811dd75e08 (&dev->wc_state_lock){+.+.}-{3:3}, at: mlx5_wc_support_get+0x18c/0x210 [mlx5_core] [ 213.620270] [ 213.620270] but task is already holding lock: [ 213.620943] ffff88810b585e08 (&dev->wc_state_lock){+.+.}-{3:3}, at: mlx5_wc_support_get+0x10c/0x210 [mlx5_core] [ 213.622045] [ 213.622045] other info that might help us debug this: [ 213.622778] Possible unsafe locking scenario: [ 213.622778] [ 213.623465] CPU0 [ 213.623815] ---- [ 213.624148] lock(&dev->wc_state_lock); [ 213.624615] lock(&dev->wc_state_lock); [ 213.625071] [ 213.625071] *** DEADLOCK *** [ 213.625071] [ 213.625805] May be due to missing lock nesting notation [ 213.625805] [ 213.626522] 4 locks held by raw_ethernet_bw/2118: [ 213.627019] #0: ffff88813f80d578 (&uverbs_dev->disassociate_srcu){.+.+}-{0:0}, at: ib_uverbs_ioctl+0xc4/0x170 [ib_uverbs] [ 213.628088] #1: ffff88810fb23930 (&file->hw_destroy_rwsem){.+.+}-{3:3}, at: ib_init_ucontext+0x2d/0xf0 [ib_uverbs] [ 213.629094] #2: ffff88810fb23878 (&file->ucontext_lock){+.+.}-{3:3}, at: ib_init_ucontext+0x49/0xf0 [ib_uverbs] [ 213.630106] #3: ffff88810b585e08 (&dev->wc_state_lock){+.+.}-{3:3}, at: mlx5_wc_support_get+0x10c/0x210 [mlx5_core] [ 213.631185] [ 213.631185] stack backtrace: [ 213.631718] CPU: 1 UID: 0 PID: 2118 Comm: raw_ethernet_bw Not tainted 6.12.0-rc7_internal_net_next_mlx5_89a0ad0 #1 [ 213.632722] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 [ 213.633785] Call Trace: [ 213.634099] [ 213.634393] dump_stack_lvl+0x7e/0xc0 [ 213.634806] print_deadlock_bug+0x278/0x3c0 [ 213.635265] __lock_acquire+0x15f4/0x2c40 [ 213.635712] lock_acquire+0xcd/0x2d0 [ 213.636120] ? mlx5_wc_support_get+0x18c/0x210 [mlx5_core] [ 213.636722] ? mlx5_ib_enable_lb+0x24/0xa0 [mlx5_ib] [ 213.637277] __mutex_lock+0x81/0xda0 [ 213.637697] ? mlx5_wc_support_get+0x18c/0x210 [mlx5_core] [ 213.638305] ? mlx5_wc_support_get+0x18c/0x210 [mlx5_core] [ 213.638902] ? rcu_read_lock_sched_held+0x3f/0x70 [ 213.639400] ? mlx5_wc_support_get+0x18c/0x210 [mlx5_core] [ 213.640016] mlx5_wc_support_get+0x18c/0x210 [mlx5_core] [ 213.640615] set_ucontext_resp+0x68/0x2b0 [mlx5_ib] [ 213.641144] ? debug_mutex_init+0x33/0x40 [ 213.641586] mlx5_ib_alloc_ucontext+0x18e/0x7b0 [mlx5_ib] [ 213.642145] ib_init_ucontext+0xa0/0xf0 [ib_uverbs] [ 213.642679] ib_uverbs_handler_UVERBS_METHOD_GET_CONTEXT+0x95/0xc0 [ib_uverbs] [ 213.643426] ? _copy_from_user+0x46/0x80 [ 213.643878] ib_uverbs_cmd_verbs+0xa6b/0xc80 [ib_uverbs] [ 213.644426] ? ib_uverbs_handler_UVERBS_METHOD_INVOKE_WRITE+0x130/0x130 [ib_uverbs] [ 213.645213] ? __lock_acquire+0xa99/0x2c40 [ 213.645675] ? lock_acquire+0xcd/0x2d0 [ 213.646101] ? ib_uverbs_ioctl+0xc4/0x170 [ib_uverbs] [ 213.646625] ? reacquire_held_locks+0xcf/0x1f0 [ 213.647102] ? do_user_addr_fault+0x45d/0x770 [ 213.647586] ib_uverbs_ioctl+0xe0/0x170 [ib_uverbs] [ 213.648102] ? ib_uverbs_ioctl+0xc4/0x170 [ib_uverbs] [ 213.648632] __x64_sys_ioctl+0x4d3/0xaa0 [ 213.649060] ? do_user_addr_fault+0x4a8/0x770 [ 213.649528] do_syscall_64+0x6d/0x140 [ 213.649947] entry_SYSCALL_64_after_hwframe+0x4b/0x53 [ 213.650478] RIP: 0033:0x7fa179b0737b [ 213.650893] Code: ff ff ff 85 c0 79 9b 49 c7 c4 ff ff ff ff 5b 5d 4c 89 e0 41 5c c3 66 0f 1f 84 00 00 00 00 00 f3 0f 1e fa b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 7d 2a 0f 00 f7 d8 64 89 01 48 [ 213.652619] RSP: 002b:00007ffd2e6d46e8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 [ 213.653390] RAX: ffffffffffffffda RBX: 00007ffd2e6d47f8 RCX: 00007fa179b0737b [ 213.654084] RDX: 00007ffd2e6d47e0 RSI: 00000000c0181b01 RDI: 0000000000000003 [ 213.654767] RBP: 00007ffd2e6d47c0 R08: 00007fa1799be010 R09: 0000000000000002 [ 213.655453] R10: 00007ffd2e6d4960 R11: 0000000000000246 R12: 00007ffd2e6d487c [ 213.656170] R13: 0000000000000027 R14: 0000000000000001 R15: 00007ffd2e6d4f70 Fixes: d98995b4bf98 ("net/mlx5: Reimplement write combining test") Signed-off-by: Yishai Hadas <yishaih@nvidia.com> Reviewed-by: Michael Guralnik <michaelgur@nvidia.com> Reviewed-by: Larysa Zaremba <larysa.zaremba@intel.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-01-16net/mlx5: Fix RDMA TX steering prioPatrisious Haddad
User added steering rules at RDMA_TX were being added to the first prio, which is the counters prio. Fix that so that they are correctly added to the BYPASS_PRIO instead. Fixes: 24670b1a3166 ("net/mlx5: Add support for RDMA TX steering") Signed-off-by: Patrisious Haddad <phaddad@nvidia.com> Reviewed-by: Mark Bloch <mbloch@nvidia.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-01-15net: ethernet: xgbe: re-add aneg to supported features in PHY quirksHeiner Kallweit
In 4.19, before the switch to linkmode bitmaps, PHY_GBIT_FEATURES included feature bits for aneg and TP/MII ports. SUPPORTED_TP | \ SUPPORTED_MII) SUPPORTED_10baseT_Full) SUPPORTED_100baseT_Full) SUPPORTED_1000baseT_Full) PHY_100BT_FEATURES | \ PHY_DEFAULT_FEATURES) PHY_1000BT_FEATURES) Referenced commit expanded PHY_GBIT_FEATURES, silently removing PHY_DEFAULT_FEATURES. The removed part can be re-added by using the new PHY_GBIT_FEATURES definition. Not clear to me is why nobody seems to have noticed this issue. I stumbled across this when checking what it takes to make phy_10_100_features_array et al private to phylib. Fixes: d0939c26c53a ("net: ethernet: xgbe: expand PHY_GBIT_FEAUTRES") Cc: stable@vger.kernel.org Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Link: https://patch.msgid.link/46521973-7738-4157-9f5e-0bb6f694acba@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-15net: pcs: xpcs: actively unset DW_VR_MII_DIG_CTRL1_2G5_EN for 1G SGMIIVladimir Oltean
xpcs_config_2500basex() sets DW_VR_MII_DIG_CTRL1_2G5_EN, but xpcs_config_aneg_c37_sgmii() never unsets it. So, on a protocol change from 2500base-x to sgmii, the DW_VR_MII_DIG_CTRL1_2G5_EN bit will remain set. Fixes: f27abde3042a ("net: pcs: add 2500BASEX support for Intel mGbE controller") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://patch.msgid.link/20250114164721.2879380-2-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-15net: pcs: xpcs: fix DW_VR_MII_DIG_CTRL1_2G5_EN bit being set for 1G SGMII ↵Vladimir Oltean
w/o inband On a port with SGMII fixed-link at SPEED_1000, DW_VR_MII_DIG_CTRL1 gets set to 0x2404. This is incorrect, because bit 2 (DW_VR_MII_DIG_CTRL1_2G5_EN) is set. It comes from the previous write to DW_VR_MII_AN_CTRL, because the "val" variable is reused and is dirty. Actually, its value is 0x4, aka FIELD_PREP(DW_VR_MII_PCS_MODE_MASK, DW_VR_MII_PCS_MODE_C37_SGMII). Resolve the issue by clearing "val" to 0 when writing to a new register. After the fix, the register value is 0x2400. Prior to the blamed commit, when the read-modify-write was open-coded, the code saved the content of the DW_VR_MII_DIG_CTRL1 register in the "ret" variable. Fixes: ce8d6081fcf4 ("net: pcs: xpcs: add _modify() accessors") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://patch.msgid.link/20250114164721.2879380-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-14net: fec: handle page_pool_dev_alloc_pages errorKevin Groeneveld
The fec_enet_update_cbd function calls page_pool_dev_alloc_pages but did not handle the case when it returned NULL. There was a WARN_ON(!new_page) but it would still proceed to use the NULL pointer and then crash. This case does seem somewhat rare but when the system is under memory pressure it can happen. One case where I can duplicate this with some frequency is when writing over a smbd share to a SATA HDD attached to an imx6q. Setting /proc/sys/vm/min_free_kbytes to higher values also seems to solve the problem for my test case. But it still seems wrong that the fec driver ignores the memory allocation error and can crash. This commit handles the allocation error by dropping the current packet. Fixes: 95698ff6177b5 ("net: fec: using page pool to manage RX buffers") Signed-off-by: Kevin Groeneveld <kgroeneveld@lenbrook.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Wei Fang <wei.fang@nxp.com> Link: https://patch.msgid.link/20250113154846.1765414-1-kgroeneveld@lenbrook.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-14net: xilinx: axienet: Fix IRQ coalescing packet count overflowSean Anderson
If coalesce_count is greater than 255 it will not fit in the register and will overflow. This can be reproduced by running # ethtool -C ethX rx-frames 256 which will result in a timeout of 0us instead. Fix this by checking for invalid values and reporting an error. Fixes: 8a3b7a252dca ("drivers/net/ethernet/xilinx: added Xilinx AXI Ethernet driver") Signed-off-by: Sean Anderson <sean.anderson@linux.dev> Reviewed-by: Shannon Nelson <shannon.nelson@amd.com> Reviewed-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com> Link: https://patch.msgid.link/20250113163001.2335235-1-sean.anderson@linux.dev Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-14nfp: bpf: prevent integer overflow in nfp_bpf_event_output()Dan Carpenter
The "sizeof(struct cmsg_bpf_event) + pkt_size + data_size" math could potentially have an integer wrapping bug on 32bit systems. Check for this and return an error. Fixes: 9816dd35ecec ("nfp: bpf: perf event output helpers support") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Link: https://patch.msgid.link/6074805b-e78d-4b8a-bf05-e929b5377c28@stanley.mountain Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-14Merge branch '100GbE' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue Tony Nguyen says: ==================== Fix E825 initialization Grzegorz Nitka says: E825 products have incorrect initialization procedure, which may lead to initialization failures and register values. Fix E825 products initialization by adding correct sync delay, checking the PHY revision only for current PHY and adding proper destination device when reading port/quad. In addition, E825 uses PF ID for indexing per PF registers and as a primary PHY lane number, which is incorrect. * '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue: ice: Add correct PHY lane assignment ice: Fix ETH56G FC-FEC Rx offset value ice: Fix quad registers read on E825 ice: Fix E825 initialization ==================== Link: https://patch.msgid.link/20250113182840.3564250-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-14cpufreq: Move endif to the end of Kconfig fileViresh Kumar
It is possible to enable few cpufreq drivers, without the framework being enabled. This happened due to a bug while moving the entries earlier. Fix it. Fixes: 7ee1378736f0 ("cpufreq: Move CPPC configs to common Kconfig and add RISC-V") Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Pierre Gondois <pierre.gondois@arm.com> Reviewed-by: Sunil V L <sunilvl@ventanamicro.com> Reviewed-by: Sudeep Holla <sudeep.holla@arm.com> Link: https://patch.msgid.link/84ac7a8fa72a8fe20487bb0a350a758bce060965.1736488384.git.viresh.kumar@linaro.org Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2025-01-14Merge tag 'pci-v6.13-fixes-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci Pull pci fix from Bjorn Helgaas: - Prevent bwctrl NULL pointer dereference that caused hangs on shutdown on ASUS ROG Strix SCAR 17 G733PYV (Lukas Wunner) * tag 'pci-v6.13-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: PCI/bwctrl: Fix NULL pointer deref on unbind and bind
2025-01-14Merge tag 'scsi-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "One iscsi driver fix and one core fix. The core fix is an important one because a retry efficiency update is now causing some USB devices to get the wrong size on discovery (it upset their retry logic for READ_CAPACITY_16)" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: iscsi: Fix redundant response for ISCSI_UEVENT_GET_HOST_STATS request scsi: core: Fix command pass through retry regression
2025-01-14pfcp: Destroy device along with udp socket's netns dismantle.Kuniyuki Iwashima
pfcp_newlink() links the device to a list in dev_net(dev) instead of net, where a udp tunnel socket is created. Even when net is removed, the device stays alive on dev_net(dev). Then, removing net triggers the splat below. [0] In this example, pfcp0 is created in ns2, but the udp socket is created in ns1. ip netns add ns1 ip netns add ns2 ip -n ns1 link add netns ns2 name pfcp0 type pfcp ip netns del ns1 Let's link the device to the socket's netns instead. Now, pfcp_net_exit() needs another netdev iteration to remove all pfcp devices in the netns. pfcp_dev_list is not used under RCU, so the list API is converted to the non-RCU variant. pfcp_net_exit() can be converted to .exit_batch_rtnl() in net-next. [0]: ref_tracker: net notrefcnt@00000000128b34dc has 1/1 users at sk_alloc (./include/net/net_namespace.h:345 net/core/sock.c:2236) inet_create (net/ipv4/af_inet.c:326 net/ipv4/af_inet.c:252) __sock_create (net/socket.c:1558) udp_sock_create4 (net/ipv4/udp_tunnel_core.c:18) pfcp_create_sock (drivers/net/pfcp.c:168) pfcp_newlink (drivers/net/pfcp.c:182 drivers/net/pfcp.c:197) rtnl_newlink (net/core/rtnetlink.c:3786 net/core/rtnetlink.c:3897 net/core/rtnetlink.c:4012) rtnetlink_rcv_msg (net/core/rtnetlink.c:6922) netlink_rcv_skb (net/netlink/af_netlink.c:2542) netlink_unicast (net/netlink/af_netlink.c:1321 net/netlink/af_netlink.c:1347) netlink_sendmsg (net/netlink/af_netlink.c:1891) ____sys_sendmsg (net/socket.c:711 net/socket.c:726 net/socket.c:2583) ___sys_sendmsg (net/socket.c:2639) __sys_sendmsg (net/socket.c:2669) do_syscall_64 (arch/x86/entry/common.c:52 arch/x86/entry/common.c:83) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130) WARNING: CPU: 1 PID: 11 at lib/ref_tracker.c:179 ref_tracker_dir_exit (lib/ref_tracker.c:179) Modules linked in: CPU: 1 UID: 0 PID: 11 Comm: kworker/u16:0 Not tainted 6.13.0-rc5-00147-g4c1224501e9d #5 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 Workqueue: netns cleanup_net RIP: 0010:ref_tracker_dir_exit (lib/ref_tracker.c:179) Code: 00 00 00 fc ff df 4d 8b 26 49 bd 00 01 00 00 00 00 ad de 4c 39 f5 0f 85 df 00 00 00 48 8b 74 24 08 48 89 df e8 a5 cc 12 02 90 <0f> 0b 90 48 8d 6b 44 be 04 00 00 00 48 89 ef e8 80 de 67 ff 48 89 RSP: 0018:ff11000007f3fb60 EFLAGS: 00010286 RAX: 00000000000020ef RBX: ff1100000d6481e0 RCX: 1ffffffff0e40d82 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffffff8423ee3c RBP: ff1100000d648230 R08: 0000000000000001 R09: fffffbfff0e395af R10: 0000000000000001 R11: 0000000000000000 R12: ff1100000d648230 R13: dead000000000100 R14: ff1100000d648230 R15: dffffc0000000000 FS: 0000000000000000(0000) GS:ff1100006ce80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00005620e1363990 CR3: 000000000eeb2002 CR4: 0000000000771ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <TASK> ? __warn (kernel/panic.c:748) ? ref_tracker_dir_exit (lib/ref_tracker.c:179) ? report_bug (lib/bug.c:201 lib/bug.c:219) ? handle_bug (arch/x86/kernel/traps.c:285) ? exc_invalid_op (arch/x86/kernel/traps.c:309 (discriminator 1)) ? asm_exc_invalid_op (./arch/x86/include/asm/idtentry.h:621) ? _raw_spin_unlock_irqrestore (./arch/x86/include/asm/irqflags.h:42 ./arch/x86/include/asm/irqflags.h:97 ./arch/x86/include/asm/irqflags.h:155 ./include/linux/spinlock_api_smp.h:151 kernel/locking/spinlock.c:194) ? ref_tracker_dir_exit (lib/ref_tracker.c:179) ? __pfx_ref_tracker_dir_exit (lib/ref_tracker.c:158) ? kfree (mm/slub.c:4613 mm/slub.c:4761) net_free (net/core/net_namespace.c:476 net/core/net_namespace.c:467) cleanup_net (net/core/net_namespace.c:664 (discriminator 3)) process_one_work (kernel/workqueue.c:3229) worker_thread (kernel/workqueue.c:3304 kernel/workqueue.c:3391) kthread (kernel/kthread.c:389) ret_from_fork (arch/x86/kernel/process.c:147) ret_from_fork_asm (arch/x86/entry/entry_64.S:257) </TASK> Fixes: 76c8764ef36a ("pfcp: add PFCP module") Reported-by: Xiao Liang <shaw.leon@gmail.com> Closes: https://lore.kernel.org/netdev/20250104125732.17335-1-shaw.leon@gmail.com/ Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-01-14gtp: Destroy device along with udp socket's netns dismantle.Kuniyuki Iwashima
gtp_newlink() links the device to a list in dev_net(dev) instead of src_net, where a udp tunnel socket is created. Even when src_net is removed, the device stays alive on dev_net(dev). Then, removing src_net triggers the splat below. [0] In this example, gtp0 is created in ns2, and the udp socket is created in ns1. ip netns add ns1 ip netns add ns2 ip -n ns1 link add netns ns2 name gtp0 type gtp role sgsn ip netns del ns1 Let's link the device to the socket's netns instead. Now, gtp_net_exit_batch_rtnl() needs another netdev iteration to remove all gtp devices in the netns. [0]: ref_tracker: net notrefcnt@000000003d6e7d05 has 1/2 users at sk_alloc (./include/net/net_namespace.h:345 net/core/sock.c:2236) inet_create (net/ipv4/af_inet.c:326 net/ipv4/af_inet.c:252) __sock_create (net/socket.c:1558) udp_sock_create4 (net/ipv4/udp_tunnel_core.c:18) gtp_create_sock (./include/net/udp_tunnel.h:59 drivers/net/gtp.c:1423) gtp_create_sockets (drivers/net/gtp.c:1447) gtp_newlink (drivers/net/gtp.c:1507) rtnl_newlink (net/core/rtnetlink.c:3786 net/core/rtnetlink.c:3897 net/core/rtnetlink.c:4012) rtnetlink_rcv_msg (net/core/rtnetlink.c:6922) netlink_rcv_skb (net/netlink/af_netlink.c:2542) netlink_unicast (net/netlink/af_netlink.c:1321 net/netlink/af_netlink.c:1347) netlink_sendmsg (net/netlink/af_netlink.c:1891) ____sys_sendmsg (net/socket.c:711 net/socket.c:726 net/socket.c:2583) ___sys_sendmsg (net/socket.c:2639) __sys_sendmsg (net/socket.c:2669) do_syscall_64 (arch/x86/entry/common.c:52 arch/x86/entry/common.c:83) WARNING: CPU: 1 PID: 60 at lib/ref_tracker.c:179 ref_tracker_dir_exit (lib/ref_tracker.c:179) Modules linked in: CPU: 1 UID: 0 PID: 60 Comm: kworker/u16:2 Not tainted 6.13.0-rc5-00147-g4c1224501e9d #5 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 Workqueue: netns cleanup_net RIP: 0010:ref_tracker_dir_exit (lib/ref_tracker.c:179) Code: 00 00 00 fc ff df 4d 8b 26 49 bd 00 01 00 00 00 00 ad de 4c 39 f5 0f 85 df 00 00 00 48 8b 74 24 08 48 89 df e8 a5 cc 12 02 90 <0f> 0b 90 48 8d 6b 44 be 04 00 00 00 48 89 ef e8 80 de 67 ff 48 89 RSP: 0018:ff11000009a07b60 EFLAGS: 00010286 RAX: 0000000000002bd3 RBX: ff1100000f4e1aa0 RCX: 1ffffffff0e40ac6 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffffff8423ee3c RBP: ff1100000f4e1af0 R08: 0000000000000001 R09: fffffbfff0e395ae R10: 0000000000000001 R11: 0000000000036001 R12: ff1100000f4e1af0 R13: dead000000000100 R14: ff1100000f4e1af0 R15: dffffc0000000000 FS: 0000000000000000(0000) GS:ff1100006ce80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f9b2464bd98 CR3: 0000000005286005 CR4: 0000000000771ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <TASK> ? __warn (kernel/panic.c:748) ? ref_tracker_dir_exit (lib/ref_tracker.c:179) ? report_bug (lib/bug.c:201 lib/bug.c:219) ? handle_bug (arch/x86/kernel/traps.c:285) ? exc_invalid_op (arch/x86/kernel/traps.c:309 (discriminator 1)) ? asm_exc_invalid_op (./arch/x86/include/asm/idtentry.h:621) ? _raw_spin_unlock_irqrestore (./arch/x86/include/asm/irqflags.h:42 ./arch/x86/include/asm/irqflags.h:97 ./arch/x86/include/asm/irqflags.h:155 ./include/linux/spinlock_api_smp.h:151 kernel/locking/spinlock.c:194) ? ref_tracker_dir_exit (lib/ref_tracker.c:179) ? __pfx_ref_tracker_dir_exit (lib/ref_tracker.c:158) ? kfree (mm/slub.c:4613 mm/slub.c:4761) net_free (net/core/net_namespace.c:476 net/core/net_namespace.c:467) cleanup_net (net/core/net_namespace.c:664 (discriminator 3)) process_one_work (kernel/workqueue.c:3229) worker_thread (kernel/workqueue.c:3304 kernel/workqueue.c:3391) kthread (kernel/kthread.c:389) ret_from_fork (arch/x86/kernel/process.c:147) ret_from_fork_asm (arch/x86/entry/entry_64.S:257) </TASK> Fixes: 459aa660eb1d ("gtp: add initial driver for datapath of GPRS Tunneling Protocol (GTP-U)") Reported-by: Xiao Liang <shaw.leon@gmail.com> Closes: https://lore.kernel.org/netdev/20250104125732.17335-1-shaw.leon@gmail.com/ Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-01-14gtp: Use for_each_netdev_rcu() in gtp_genl_dump_pdp().Kuniyuki Iwashima
gtp_newlink() links the gtp device to a list in dev_net(dev). However, even after the gtp device is moved to another netns, it stays on the list but should be invisible. Let's use for_each_netdev_rcu() for netdev traversal in gtp_genl_dump_pdp(). Note that gtp_dev_list is no longer used under RCU, so list helpers are converted to the non-RCU variant. Fixes: 459aa660eb1d ("gtp: add initial driver for datapath of GPRS Tunneling Protocol (GTP-U)") Reported-by: Xiao Liang <shaw.leon@gmail.com> Closes: https://lore.kernel.org/netdev/CABAhCOQdBL6h9M2C+kd+bGivRJ9Q72JUxW+-gur0nub_=PmFPA@mail.gmail.com/ Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-01-13r8169: remove redundant hwmon supportHeiner Kallweit
The temperature sensor is actually part of the integrated PHY and available also on the standalone versions of the PHY. Therefore hwmon support will be added to the Realtek PHY driver and can be removed here. Fixes: 1ffcc8d41306 ("r8169: add support for the temperature sensor being available from RTL8125B") Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/afba85f5-987b-4449-83cc-350438af7fe7@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-13ACPI: video: Fix random crashes due to bad kfree()Chris Bainbridge
Commit c6a837088bed ("drm/amd/display: Fetch the EDID from _DDC if available for eDP") added function dm_helpers_probe_acpi_edid(), which fetches the EDID from the BIOS by calling acpi_video_get_edid(). acpi_video_get_edid() returns a pointer to the EDID, but this pointer does not originate from kmalloc() - it is actually the internal "pointer" field from an acpi_buffer struct (which did come from kmalloc()). dm_helpers_probe_acpi_edid() then attempts to kfree() the EDID pointer, resulting in memory corruption which leads to random, intermittent crashes (e.g. 4% of boots will fail with some Oops). Fix this by allocating a new array (which can be safely freed) for the EDID data, and correctly freeing the acpi_buffer pointer. The only other caller of acpi_video_get_edid() is nouveau_acpi_edid(): remove the extraneous kmemdup() here as the EDID data is now copied in acpi_video_device_EDID(). Signed-off-by: Chris Bainbridge <chris.bainbridge@gmail.com> Fixes: c6a837088bed ("drm/amd/display: Fetch the EDID from _DDC if available for eDP") Reviewed-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Reported-by: Borislav Petkov (AMD) <bp@alien8.de> Tested-by: Borislav Petkov (AMD) <bp@alien8.de> Closes: https://lore.kernel.org/amd-gfx/20250110175252.GBZ4FedNKqmBRaY4T3@fat_crate.local/T/#m324a23eb4c4c32fa7e89e31f8ba96c781e496fb1 Link: https://patch.msgid.link/Z4K_oQL7eA9Owkbs@debian.local [ rjw: Changed function description comment into a kerneldoc one ] [ rjw: Subject and changelog edits ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2025-01-13cpuidle: teo: Update documentation after previous changesRafael J. Wysocki
After previous changes, the description of the teo governor in the documentation comment does not match the code any more, so update it as appropriate. Fixes: 449914398083 ("cpuidle: teo: Remove recent intercepts metric") Fixes: 2662342079f5 ("cpuidle: teo: Gather statistics regarding whether or not to stop the tick") Fixes: 6da8f9ba5a87 ("cpuidle: teo: Skip tick_nohz_get_sleep_length() call in some cases") Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Christian Loehle <christian.loehle@arm.com> Link: https://patch.msgid.link/6120335.lOV4Wx5bFT@rjwysocki.net [ rjw: Corrected 3 typos found by Christian ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2025-01-13ice: Add correct PHY lane assignmentKarol Kolacinski
Driver always naively assumes, that for PTP purposes, PHY lane to configure is corresponding to PF ID. This is not true for some port configurations, e.g.: - 2x50G per quad, where lanes used are 0 and 2 on each quad, but PF IDs are 0 and 1 - 100G per quad on 2 quads, where lanes used are 0 and 4, but PF IDs are 0 and 1 Use correct PHY lane assignment by getting and parsing port options. This is read from the NVM by the FW and provided to the driver with the indication of active port split. Remove ice_is_muxed_topo(), which is no longer needed. Fixes: 4409ea1726cb ("ice: Adjust PTP init for 2x50G E825C devices") Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Arkadiusz Kubalewski <Arkadiusz.kubalewski@intel.com> Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com> Signed-off-by: Grzegorz Nitka <grzegorz.nitka@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-01-13ice: Fix ETH56G FC-FEC Rx offset valueKarol Kolacinski
Fix ETH56G FC-FEC incorrect Rx offset value by changing it from -255.96 to -469.26 ns. Those values are derived from HW spec and reflect internal delays. Hex value is a fixed point representation in Q23.9 format. Fixes: 7cab44f1c35f ("ice: Introduce ETH56G PHY model for E825C products") Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-01-13ice: Fix quad registers read on E825Karol Kolacinski
Quad registers are read/written incorrectly. E825 devices always use quad 0 address and differentiate between the PHYs by changing SBQ destination device (phy_0 or phy_0_peer). Add helpers for reading/writing PTP registers shared per quad and use correct quad address and SBQ destination device based on port. Fixes: 7cab44f1c35f ("ice: Introduce ETH56G PHY model for E825C products") Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com> Signed-off-by: Grzegorz Nitka <grzegorz.nitka@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-01-13ice: Fix E825 initializationKarol Kolacinski
Current implementation checks revision of all PHYs on all PFs, which is incorrect and may result in initialization failure. Check only the revision of the current PHY. Fixes: 7cab44f1c35f ("ice: Introduce ETH56G PHY model for E825C products") Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com> Signed-off-by: Grzegorz Nitka <grzegorz.nitka@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-01-13Merge tag 'mm-hotfixes-stable-2025-01-13-00-03' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull misc fixes from Andrew Morton: "18 hotfixes. 11 are cc:stable. 13 are MM and 5 are non-MM. All patches are singletons - please see the relevant changelogs for details" * tag 'mm-hotfixes-stable-2025-01-13-00-03' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: fs/proc: fix softlockup in __read_vmcore (part 2) mm: fix assertion in folio_end_read() mm: vmscan : pgdemote vmstat is not getting updated when MGLRU is enabled. vmstat: disable vmstat_work on vmstat_cpu_down_prep() zram: fix potential UAF of zram table selftests/mm: set allocated memory to non-zero content in cow test mm: clear uffd-wp PTE/PMD state on mremap() module: fix writing of livepatch relocations in ROX text mm: zswap: properly synchronize freeing resources during CPU hotunplug Revert "mm: zswap: fix race between [de]compression and CPU hotunplug" hugetlb: fix NULL pointer dereference in trace_hugetlbfs_alloc_inode mm: fix div by zero in bdi_ratio_from_pages x86/execmem: fix ROX cache usage in Xen PV guests filemap: avoid truncating 64-bit offset to 32 bits tools: fix atomic_set() definition to set the value correctly mm/mempolicy: count MPOL_WEIGHTED_INTERLEAVE to "interleave_hit" scripts/decode_stacktrace.sh: fix decoding of lines with an additional info mm/kmemleak: fix percpu memory leak detection failure
2025-01-12zram: fix potential UAF of zram tableKairui Song
If zram_meta_alloc failed early, it frees allocated zram->table without setting it NULL. Which will potentially cause zram_meta_free to access the table if user reset an failed and uninitialized device. Link: https://lkml.kernel.org/r/20250107065446.86928-1-ryncsn@gmail.com Fixes: 74363ec674cb ("zram: fix uninitialized ZRAM not releasing backing device") Signed-off-by: Kairui Song <kasong@tencent.com> Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2025-01-12Merge tag 'char-misc-6.13-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc/IIO driver fixes from Greg KH: "Here are a bunch of small IIO and interconnect and other driver fixes to resolve reported issues. Included in here are: - loads of iio driver fixes as a result of an audit of places where uninitialized data would leak to userspace. - other smaller, and normal, iio driver fixes. - mhi driver fix - interconnect driver fixes - pci1xxxx driver fix All of these have been in linux-next for a while with no reported issues" * tag 'char-misc-6.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (32 commits) misc: microchip: pci1xxxx: Resolve return code mismatch during GPIO set config misc: microchip: pci1xxxx: Resolve kernel panic during GPIO IRQ handling interconnect: icc-clk: check return values of devm_kasprintf() interconnect: qcom: icc-rpm: Set the count member before accessing the flex array iio: adc: ti-ads1119: fix sample size in scan struct for triggered buffer iio: temperature: tmp006: fix information leak in triggered buffer iio: inkern: call iio_device_put() only on mapped devices iio: adc: ad9467: Fix the "don't allow reading vref if not available" case iio: adc: at91: call input_free_device() on allocated iio_dev iio: adc: ad7173: fix using shared static info struct iio: adc: ti-ads124s08: Use gpiod_set_value_cansleep() iio: adc: ti-ads1119: fix information leak in triggered buffer iio: pressure: zpa2326: fix information leak in triggered buffer iio: adc: rockchip_saradc: fix information leak in triggered buffer iio: imu: kmx61: fix information leak in triggered buffer iio: light: vcnl4035: fix information leak in triggered buffer iio: light: bh1745: fix information leak in triggered buffer iio: adc: ti-ads8688: fix information leak in triggered buffer iio: dummy: iio_simply_dummy_buffer: fix information leak in triggered buffer iio: test: Fix GTS test config ...
2025-01-12Merge tag 'driver-core-6.13-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core and debugfs fixes from Greg KH: "Here are some small driver core and debugfs fixes that resolve some reported problems: - debugfs runtime error reporting fixes - topology cpumask race-condition fix - MAINTAINERS file email update All of these have been in linux-next this week with no reported issues" * tag 'driver-core-6.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: fs: debugfs: fix open proxy for unsafe files MAINTAINERS: align Danilo's maintainer entries topology: Keep the cpumask unchanged when printing cpumap debugfs: fix missing mutex_destroy() in short_fops case fs: debugfs: differentiate short fops with proxy ops
2025-01-12Merge tag 'staging-6.13-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging driver fixes from Greg KH: "Here are some small staging driver fixes that resolve some reported issues and have been in my tree for too long due to the holiday break. They resolve the following issues: - lots of gpib build-time fixes as reported by testers and 0-day - gpib logical fixes - mailmap fix All of these have been in linux-next for a while, with no reported issues other than the duplicated change" * tag 'staging-6.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: staging: gpib: mite: remove unused global functions staging: gpib: refer to correct config symbol in tnt4882 Makefile mailmap: update Bingwu Zhang's email address staging: gpib: fix address space mixup staging: gpib: use ioport_map staging: gpib: fix pcmcia dependencies staging: gpib: add module author and description fields staging: gpib: fix Makefiles staging: gpib: make global 'usec_diff' functions static staging: gpib: Modify mismatched function name staging: gpib: Add lower bound check for secondary address staging: gpib: Fix erroneous removal of blank before newline
2025-01-12Merge tag 'tty-6.13-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull serial driver fixes from Greg KH: "Here are three small serial driver fixes tree. They resolve some reported issues: - stm32 break control fix - 8250 runtime pm usage counter fix - imx driver locking fix All have been in my tree and linux-next for three weeks now, with no reported issues" * tag 'tty-6.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: serial: stm32: use port lock wrappers for break control serial: imx: Use uart_port_lock_irq() instead of uart_port_lock() tty: serial: 8250: Fix another runtime PM usage counter underflow
2025-01-12Merge tag 'usb-6.13-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg KH: "Here are some small USB driver fixes and new device ids for 6.13-rc7. Included in here are: - usb serial new device ids - typec bugfixes for reported issues - dwc3 driver fixes - chipidea driver fixes - gadget driver fixes - other minor fixes for reported problems. All of these have been in linux-next for a while, with no reported issues" * tag 'usb-6.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: USB: serial: option: add Neoway N723-EA support USB: serial: option: add MeiG Smart SRM815 USB: serial: cp210x: add Phoenix Contact UPS Device usb: typec: fix pm usage counter imbalance in ucsi_ccg_sync_control() usb-storage: Add max sectors quirk for Nokia 208 usb: gadget: midi2: Reverse-select at the right place usb: gadget: f_fs: Remove WARN_ON in functionfs_bind USB: core: Disable LPM only for non-suspended ports usb: fix reference leak in usb_new_device() usb: typec: tcpci: fix NULL pointer issue on shared irq case usb: gadget: u_serial: Disable ep before setting port to null to fix the crash caused by port being null usb: chipidea: ci_hdrc_imx: decrement device's refcount in .remove() and in the error path of .probe() usb: typec: ucsi: Set orientation as none when connector is unplugged usb: gadget: configfs: Ignore trailing LF for user strings to cdev USB: usblp: return error when setting unsupported protocol usb: gadget: f_uac2: Fix incorrect setting of bNumEndpoints usb: typec: tcpm/tcpci_maxim: fix error code in max_contaminant_read_resistance_kohm() usb: host: xhci-plat: set skip_phy_initialization if software node has XHCI_SKIP_PHY_INIT property usb: dwc3-am62: Disable autosuspend during remove usb: dwc3: gadget: fix writing NYET threshold
2025-01-11Merge tag 'hwmon-for-v6.13-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon fix from Guenter Roeck: "One patch to fix error handling in drivetemp driver" * tag 'hwmon-for-v6.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (drivetemp) Fix driver producing garbage data when SCSI errors occur
2025-01-10net: ravb: Fix max TX frame size for RZ/V2MPaul Barker
When tx_max_frame_size was added to struct ravb_hw_info, no value was set in ravb_rzv2m_hw_info so the default value of zero was used. The maximum MTU is set by subtracting from tx_max_frame_size to allow space for headers and frame checksums. As ndev->max_mtu is unsigned, this subtraction wraps around leading to a ridiculously large positive value that is obviously incorrect. Before tx_max_frame_size was introduced, the maximum MTU was based on rx_max_frame_size. So, we can restore the correct maximum MTU by copying the rx_max_frame_size value into tx_max_frame_size for RZ/V2M. Fixes: 1d63864299ca ("net: ravb: Fix maximum TX frame size for GbEth devices") Signed-off-by: Paul Barker <paul.barker.ct@bp.renesas.com> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru> Link: https://patch.msgid.link/20250109113706.1409149-1-paul.barker.ct@bp.renesas.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-10net: mana: Cleanup "mana" debugfs dir after cleanup of all childrenShradha Gupta
In mana_driver_exit(), mana_debugfs_root gets cleanup before any of it's children (which happens later in the pci_unregister_driver()). Due to this, when mana driver is configured as a module and rmmod is invoked, following stack gets printed along with failure in rmmod command. [ 2399.317651] BUG: kernel NULL pointer dereference, address: 0000000000000098 [ 2399.318657] #PF: supervisor write access in kernel mode [ 2399.319057] #PF: error_code(0x0002) - not-present page [ 2399.319528] PGD 10eb68067 P4D 0 [ 2399.319914] Oops: Oops: 0002 [#1] SMP NOPTI [ 2399.320308] CPU: 72 UID: 0 PID: 5815 Comm: rmmod Not tainted 6.13.0-rc5+ #89 [ 2399.320986] Hardware name: Microsoft Corporation Virtual Machine/Virtual Machine, BIOS Hyper-V UEFI Release v4.1 09/28/2024 [ 2399.321892] RIP: 0010:down_write+0x1a/0x50 [ 2399.322303] Code: 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 0f 1f 44 00 00 55 48 89 e5 41 54 49 89 fc e8 9d cd ff ff 31 c0 ba 01 00 00 00 <f0> 49 0f b1 14 24 75 17 65 48 8b 05 f6 84 dd 5f 49 89 44 24 08 4c [ 2399.323669] RSP: 0018:ff53859d6c663a70 EFLAGS: 00010246 [ 2399.324061] RAX: 0000000000000000 RBX: ff1d4eb505060180 RCX: ffffff8100000000 [ 2399.324620] RDX: 0000000000000001 RSI: 0000000000000064 RDI: 0000000000000098 [ 2399.325167] RBP: ff53859d6c663a78 R08: 00000000000009c4 R09: ff1d4eb4fac90000 [ 2399.325681] R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000098 [ 2399.326185] R13: ff1d4e42e1a4a0c8 R14: ff1d4eb538ce0000 R15: 0000000000000098 [ 2399.326755] FS: 00007fe729570000(0000) GS:ff1d4eb2b7200000(0000) knlGS:0000000000000000 [ 2399.327269] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 2399.327690] CR2: 0000000000000098 CR3: 00000001c0584005 CR4: 0000000000373ef0 [ 2399.328166] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 2399.328623] DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000400 [ 2399.329055] Call Trace: [ 2399.329243] <TASK> [ 2399.329379] ? show_regs+0x69/0x80 [ 2399.329602] ? __die+0x25/0x70 [ 2399.329856] ? page_fault_oops+0x271/0x550 [ 2399.330088] ? psi_group_change+0x217/0x470 [ 2399.330341] ? do_user_addr_fault+0x455/0x7b0 [ 2399.330667] ? finish_task_switch.isra.0+0x91/0x2f0 [ 2399.331004] ? exc_page_fault+0x73/0x160 [ 2399.331275] ? asm_exc_page_fault+0x27/0x30 [ 2399.343324] ? down_write+0x1a/0x50 [ 2399.343631] simple_recursive_removal+0x4d/0x2c0 [ 2399.343977] ? __pfx_remove_one+0x10/0x10 [ 2399.344251] debugfs_remove+0x45/0x70 [ 2399.344511] mana_destroy_rxq+0x44/0x400 [mana] [ 2399.344845] mana_destroy_vport+0x54/0x1c0 [mana] [ 2399.345229] mana_detach+0x2f1/0x4e0 [mana] [ 2399.345466] ? ida_free+0x150/0x160 [ 2399.345718] ? __cond_resched+0x1a/0x50 [ 2399.345987] mana_remove+0xf4/0x1a0 [mana] [ 2399.346243] mana_gd_remove+0x25/0x80 [mana] [ 2399.346605] pci_device_remove+0x41/0xb0 [ 2399.346878] device_remove+0x46/0x70 [ 2399.347150] device_release_driver_internal+0x1e3/0x250 [ 2399.347831] ? klist_remove+0x81/0xe0 [ 2399.348377] driver_detach+0x4b/0xa0 [ 2399.348906] bus_remove_driver+0x83/0x100 [ 2399.349435] driver_unregister+0x31/0x60 [ 2399.349919] pci_unregister_driver+0x40/0x90 [ 2399.350492] mana_driver_exit+0x1c/0xb50 [mana] [ 2399.351102] __do_sys_delete_module.constprop.0+0x184/0x320 [ 2399.351664] ? __fput+0x1a9/0x2d0 [ 2399.352200] __x64_sys_delete_module+0x12/0x20 [ 2399.352760] x64_sys_call+0x1e66/0x2140 [ 2399.353316] do_syscall_64+0x79/0x150 [ 2399.353813] ? syscall_exit_to_user_mode+0x49/0x230 [ 2399.354346] ? do_syscall_64+0x85/0x150 [ 2399.354816] ? irqentry_exit+0x1d/0x30 [ 2399.355287] ? exc_page_fault+0x7f/0x160 [ 2399.355756] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ 2399.356302] RIP: 0033:0x7fe728d26aeb [ 2399.356776] Code: 73 01 c3 48 8b 0d 45 33 0f 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa b8 b0 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 15 33 0f 00 f7 d8 64 89 01 48 [ 2399.358372] RSP: 002b:00007ffff954d6f8 EFLAGS: 00000206 ORIG_RAX: 00000000000000b0 [ 2399.359066] RAX: ffffffffffffffda RBX: 00005609156cc760 RCX: 00007fe728d26aeb [ 2399.359779] RDX: 000000000000000a RSI: 0000000000000800 RDI: 00005609156cc7c8 [ 2399.360535] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 [ 2399.361261] R10: 00007fe728dbeac0 R11: 0000000000000206 R12: 00007ffff954d950 [ 2399.361952] R13: 00005609156cc2a0 R14: 00007ffff954ee5f R15: 00005609156cc760 [ 2399.362688] </TASK> Fixes: 6607c17c6c5e ("net: mana: Enable debugfs files for MANA device") Cc: stable@vger.kernel.org Signed-off-by: Shradha Gupta <shradhagupta@linux.microsoft.com> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Link: https://patch.msgid.link/1736398991-764-1-git-send-email-shradhagupta@linux.microsoft.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-10eth: bnxt: always recalculate features after XDP clearing, fix null-derefJakub Kicinski
Recalculate features when XDP is detached. Before: # ip li set dev eth0 xdp obj xdp_dummy.bpf.o sec xdp # ip li set dev eth0 xdp off # ethtool -k eth0 | grep gro rx-gro-hw: off [requested on] After: # ip li set dev eth0 xdp obj xdp_dummy.bpf.o sec xdp # ip li set dev eth0 xdp off # ethtool -k eth0 | grep gro rx-gro-hw: on The fact that HW-GRO doesn't get re-enabled automatically is just a minor annoyance. The real issue is that the features will randomly come back during another reconfiguration which just happens to invoke netdev_update_features(). The driver doesn't handle reconfiguring two things at a time very robustly. Starting with commit 98ba1d931f61 ("bnxt_en: Fix RSS logic in __bnxt_reserve_rings()") we only reconfigure the RSS hash table if the "effective" number of Rx rings has changed. If HW-GRO is enabled "effective" number of rings is 2x what user sees. So if we are in the bad state, with HW-GRO re-enablement "pending" after XDP off, and we lower the rings by / 2 - the HW-GRO rings doing 2x and the ethtool -L doing / 2 may cancel each other out, and the: if (old_rx_rings != bp->hw_resc.resv_rx_rings && condition in __bnxt_reserve_rings() will be false. The RSS map won't get updated, and we'll crash with: BUG: kernel NULL pointer dereference, address: 0000000000000168 RIP: 0010:__bnxt_hwrm_vnic_set_rss+0x13a/0x1a0 bnxt_hwrm_vnic_rss_cfg_p5+0x47/0x180 __bnxt_setup_vnic_p5+0x58/0x110 bnxt_init_nic+0xb72/0xf50 __bnxt_open_nic+0x40d/0xab0 bnxt_open_nic+0x2b/0x60 ethtool_set_channels+0x18c/0x1d0 As we try to access a freed ring. The issue is present since XDP support was added, really, but prior to commit 98ba1d931f61 ("bnxt_en: Fix RSS logic in __bnxt_reserve_rings()") it wasn't causing major issues. Fixes: 1054aee82321 ("bnxt_en: Use NETIF_F_GRO_HW.") Fixes: 98ba1d931f61 ("bnxt_en: Fix RSS logic in __bnxt_reserve_rings()") Reviewed-by: Michael Chan <michael.chan@broadcom.com> Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com> Link: https://patch.msgid.link/20250109043057.2888953-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
generated by cgit (git 2.34.1) at 2025-09-09 02:00:42 +0000