summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2024-11-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netPaolo Abeni
Merge in late fixes to prepare for the 6.13 net-next PR. Conflicts: include/linux/phy.h 41ffcd95015f net: phy: fix phylib's dual eee_enabled 721aa69e708b net: phy: convert eee_broken_modes to a linkmode bitmap https://lore.kernel.org/all/20241118135512.1039208b@canb.auug.org.au/ drivers/net/ethernet/wangxun/txgbe/txgbe_phy.c 2160428bcb20 net: txgbe: fix null pointer to pcs 2160428bcb20 net: txgbe: remove GPIO interrupt controller Adjacent commits: include/linux/phy.h 41ffcd95015f net: phy: fix phylib's dual eee_enabled 516a5f11eb97 net: phy: respect cached advertising when re-enabling EEE Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-11-19spi: rockchip-sfc: Embedded DMA only support 4B aligned addressJon Lin
Controller limitations. Signed-off-by: Jon Lin <jon.lin@rock-chips.com> Link: https://patch.msgid.link/20241118145646.2609039-1-jon.lin@rock-chips.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-11-19Merge tag 'spi-nor/for-6.13' of ↵Miquel Raynal
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux into mtd/next SPI NOR introduces byte swap support for 8D-8D-8D mode and a user for it: macronix. SPI NOR flashes may swap the bytes on a 16-bit boundary when configured in Octal DTR mode. For such cases the byte order is propagated through SPI MEM to the SPI controllers so that the controllers swap the bytes back at runtime. This avoids breaking the boot sequence because of the endianness problems that appear when the bootloaders use 1-1-1 and the kernel uses 8D-8D-8D with byte swap support. Along with the SPI MEM byte swap support we queue a patch for the SPI MXIC controller that swaps the bytes back at runtime. # -----BEGIN PGP SIGNATURE----- # # iQEzBAABCgAdFiEEHUIqys8OyG1eHf7fS1VPR6WNFOkFAmczG/oACgkQS1VPR6WN # FOnTCAf/YjH9AimQAFJLRKoGqsf6boh1JppcRh1YTRS+D6+Ap9+s1gJoZZYs5VWA # vNfBzGqDXknBvpmOgoXnuDu2zFs9FUvdN5Kf7w6LiS5qtz7uOxHdVoDQyDgnN6w5 # 9ts7qF7LViBHg/HgTEzQT2Zj6qmvIwUbccIkmJeehWjEP/urzOML5nPnM9g4HZVB # W8B5KQ4TiOY1GxkXvIP6EQS6mDKznP3yl2Hnsmk0HPpSm6D807O2zvT+z1SCxpjy # C8+mYRKsRxHoFGL6UzWgqREGBn2wzF7Ral1CR9SpSZZLLtr6S0shqRzKiiH8eiZK # 1hFpXzMS3OWi4a/5724AWaqcR0Qgqw== # =jf3Q # -----END PGP SIGNATURE----- # gpg: Signature made Tue 12 Nov 2024 10:12:26 AM CET # gpg: using RSA key 1D422ACACF0EC86D5E1DFEDF4B554F47A58D14E9 # gpg: Good signature from "Tudor Ambarus (4096-bit rsa key) <tudor.ambarus@microchip.com>" [full] # gpg: aka "Tudor Ambarus <tudor.ambarus@gmail.com>" [full] # gpg: tudor.ambarus@microchip.com: Verified 15 signatures in the past 5 years. # Encrypted 0 messages. # gpg: tudor.ambarus@gmail.com: Verified 15 signatures in the past 5 years. # Encrypted 0 messages.
2024-11-19drm/i915/hdcp: Fix when the first read and write are retriedSuraj Kandpal
Make sure that the first read/write in hdcp2_authentication_key_exchange are only retried when we have either DP/DPMST encoder connected, since we do this to give docks and dp encoders some extra time to get their HDCP DPCD registers ready only for DP/DPMST encoders as this issue is only observed here no need to burden other encoders with extra retries as this causes the HDMI connector to have some other timing issue and fails HDCP authentication. --v2 -Add intent of patch [Chaitanya] -Add reasoning for loop [Jani] -Make sure we forfiet the 50ms wait for non DP/DPMST encoders. --v3 -Remove the is_dp_encoder check [Jani/Chaitanya] -Make the commit message more clearer [Jani] Fixes: 9d5a05f86d2f ("drm/i915/hdcp: Retry first read and writes to downstream") Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com> Reviewed-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241104035951.517837-1-suraj.kandpal@intel.com (cherry picked from commit 44499559496c1dac43583f4387d38de1b612a69b) Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
2024-11-19EDAC/powerpc: Remove PPC_MAPLE driversMichael Ellerman
These two drivers are only buildable for the powerpc "maple" platform (CONFIG_PPC_MAPLE), which has now been removed, see commit 62f8f307c80e ("powerpc/64: Remove maple platform"). Remove the drivers. Acked-by: Borislav Petkov (AMD) <bp@alien8.de> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://patch.msgid.link/20241112084134.411964-1-mpe@ellerman.id.au
2024-11-18Merge branches 'clk-marvell', 'clk-adi', 'clk-qcom' and 'clk-devm' into clk-nextStephen Boyd
- Add devm_clk_bulk_get_all_enabled() to return number of clks acquired - Marvell PXA1908 SoC clks * clk-marvell: clk: mmp: Add Marvell PXA1908 MPMU driver clk: mmp: Add Marvell PXA1908 APMU driver clk: mmp: Add Marvell PXA1908 APBCP driver clk: mmp: Add Marvell PXA1908 APBC driver dt-bindings: clock: Add Marvell PXA1908 clock bindings clk: mmp: Switch to use struct u32_fract instead of custom one * clk-adi: clk: clk-axi-clkgen: make sure to enable the AXI bus clock dt-bindings: clock: axi-clkgen: include AXI clk * clk-qcom: (43 commits) clk: qcom: remove unused data from gcc-ipq5424.c clk: qcom: Add support for Global Clock Controller on QCS8300 dt-bindings: clock: qcom: Add GCC clocks for QCS8300 clk: qcom: add Global Clock controller (GCC) driver for IPQ5424 SoC clk: qcom: clk-alpha-pll: Add NSS HUAYRA ALPHA PLL support for ipq9574 dt-bindings: clock: Add Qualcomm IPQ5424 GCC binding clk: qcom: add SAR2130P GPU Clock Controller support clk: qcom: dispcc-sm8550: enable support for SAR2130P clk: qcom: tcsrcc-sm8550: add SAR2130P support clk: qcom: add support for GCC on SAR2130P clk: qcom: rpmh: add support for SAR2130P clk: qcom: rcg2: add clk_rcg2_shared_floor_ops dt-bindings: clk: qcom,sm8450-gpucc: add SAR2130P compatibles dt-bindings: clock: qcom,sm8550-dispcc: Add SAR2130P compatible dt-bindings: clock: qcom,sm8550-tcsr: Add SAR2130P compatible dt-bindings: clock: qcom: document SAR2130P Global Clock Controller dt-bindings: clock: qcom,rpmhcc: Add SAR2130P compatible clk: qcom: Make GCC_6125 depend on QCOM_GDSC dt-bindings: clock: qcom: gcc-ipq9574: remove q6 bring up clock macros dt-bindings: clock: qcom: gcc-ipq5332: remove q6 bring up clock macros ... * clk-devm: clk: Provide devm_clk_bulk_get_all_enabled() helper
2024-11-18Merge branches 'clk-samsung', 'clk-microchip', 'clk-imx', 'clk-amlogic' and ↵Stephen Boyd
'clk-allwinner' into clk-next * clk-samsung: clk: samsung: Introduce Exynos8895 clock driver clk: samsung: clk-pll: Add support for pll_{1051x,1052x} dt-bindings: clock: samsung: Add Exynos8895 SoC clk: samsung: gs101: make all ufs related clocks critical clk: samsung: exynosautov920: add peric1, misc and hsi0/1 clock support dt-bindings: clock: exynosautov920: add peric1, misc and hsi0/1 clock definitions clk: samsung: Fix out-of-bound access of of_match_node() dt-bindings: clock: samsung: remove define with number of clocks for FSD clk: samsung: fsd: do not define number of clocks in bindings clk: samsung: Fix errors reported by checkpatch clk: samsung: Fix block comment style warnings reported by checkpatch * clk-microchip: clk: lan966x: add support for lan969x SoC clock driver clk: lan966x: prepare driver for lan969x support clk: lan966x: make clk_names const char * const dt-bindings: clock: add support for lan969x * clk-imx: clk: imx: imx8-acm: Fix return value check in clk_imx_acm_attach_pm_domains() clk: imx: lpcg-scu: Skip HDMI LPCG clock save/restore clk: imx: clk-scu: fix clk enable state save and restore clk: imx: fracn-gppll: fix pll power up clk: imx: fracn-gppll: correct PLL initialization flow clk: imx: lpcg-scu: SW workaround for errata (e10858) clk: imx: add i.MX91 clk dt-bindings: clock: Add i.MX91 clock support dt-bindings: clock: imx93: Drop IMX93_CLK_END macro definition clk: imx93: Move IMX93_CLK_END macro to clk driver clk: imx95-blk-ctl: Add one clock gate for HSIO block dt-bindings: clock: nxp,imx95-blk-ctl: Add compatible string for i.MX95 HSIO BLK CTRL * clk-amlogic: clk: amlogic: axg-audio: fix Kconfig dependency on RESET_MESON_AUX clk: amlogic: axg-audio: use the auxiliary reset driver reset: amlogic: Fix small whitespace issue reset: amlogic: add auxiliary reset driver support reset: amlogic: split the device core and platform probe reset: amlogic: move drivers to a dedicated directory reset: amlogic: add reset status support reset: amlogic: use reset number instead of register count reset: amlogic: add driver parameters reset: amlogic: make parameters unsigned reset: amlogic: use generic data matching function reset: amlogic: convert driver to regmap dt-bindings: clock: convert amlogic,meson8b-clkc.txt to dtschema clk: meson: meson8b: remove spinlock clk: meson: mpll: Delete a useless spinlock from the MPLL clk: meson: s4: pll: fix frac maximum value for hifi_pll clk: meson: c3: pll: fix frac maximum value for hifi_pll clk: meson: Support PLL with fixed fractional denominators clk: meson: s4: pll: hifi_pll support fractional multiplier * clk-allwinner: clk: sunxi-ng: Use of_property_present() for non-boolean properties clk: sunxi-ng: d1: Fix PLL_AUDIO0 preset clk: sunxi-ng: Constify struct ccu_reset_map clk: sunxi-ng: h616: Add sigma-delta modulation settings for audio PLL
2024-11-18Merge branches 'clk-mobileye', 'clk-twl', 'clk-nuvoton', 'clk-renesas' and ↵Stephen Boyd
'clk-bindings' into clk-next - Mobileye EyeQ5, EyeQ6L and EyeQ6H clk driver - TWL6030 clk driver - Nuvoton Arbel BMC NPCM8XX SoC clks - Convert more clk bindings to YAML * clk-mobileye: clk: eyeq: add EyeQ6H west fixed factor clocks clk: eyeq: add EyeQ6H central fixed factor clocks clk: eyeq: add EyeQ5 fixed factor clocks clk: eyeq: add fixed factor clocks infrastructure clk: eyeq: require clock index with phandle in all cases clk: fixed-factor: add clk_hw_register_fixed_factor_index() function dt-bindings: clock: eyeq: add more Mobileye EyeQ5/EyeQ6H clocks dt-bindings: soc: mobileye: set `#clock-cells = <1>` for all compatibles clk: eyeq: add driver clk: divider: Introduce CLK_DIVIDER_EVEN_INTEGERS flag dt-bindings: clock: add Mobileye EyeQ6L/EyeQ6H clock indexes Revert "dt-bindings: clock: mobileye,eyeq5-clk: add bindings" * clk-twl: clk: twl: add TWL6030 support clk: twl: remove is_prepared * clk-nuvoton: clk: npcm8xx: add clock controller reset: npcm: register npcm8xx clock auxiliary bus device dt-bindings: reset: npcm: add clock properties * clk-renesas: clk: renesas: vbattb: Add VBATTB clock driver clk: Add devm_clk_hw_register_gate_parent_hw() clk: renesas: rzg2l: Fix FOUTPOSTDIV clk dt-bindings: clock: renesas,r9a08g045-vbattb: Document VBATTB clk: renesas: r9a08g045: Add power domain for RTC clk: renesas: r9a08g045: Mark the watchdog and always-on PM domains as IRQ safe clk: renesas: rzg2l-cpg: Use GENPD_FLAG_* flags instead of local ones clk: renesas: rzg2l-cpg: Move PM domain power on in rzg2l_cpg_pd_setup() dt-bindings: clock: r9a08g045-cpg: Add power domain ID for RTC clk: renesas: r8a779h0: Drop CLK_PLL2_DIV2 to clarify ZCn clocks clk: renesas: r9a09g057: Add clock and reset entries for ICU clk: renesas: r9a09g057: Add CA55 core clocks clk: renesas: Remove duplicate and trailing empty lines * clk-bindings: dt-bindings: clock: actions,owl-cmu: convert to YAML dt-bindings: clock: ti: Convert mux.txt to json-schema dt-bindings: clock: ti: Convert divider.txt to json-schema dt-bindings: clock: ti: Convert interface.txt to json-schema dt-bindings: clock: convert rockchip,rk3328-cru.txt to YAML
2024-11-18Merge branches 'clk-cleanup', 'clk-mediatek', 'clk-kunit', 'clk-xilinx' and ↵Stephen Boyd
'clk-fixed-gate' into clk-next - Various clk driver cleanups - MediaTek MT6735 SoC clks - MediaTek MT7620, MT7628 and MT7688 MMC clks - KUnit tests for clk-assigned-rates{,-u64} - Add a driver for gated fixed rate clocks * clk-cleanup: clk: clk-loongson2: Fix potential buffer overflow in flexible-array member access clk: Fix invalid execution of clk_set_rate clk: clk-loongson2: Fix memory corruption bug in struct loongson2_clk_provider clk: lan966x: make it selectable for ARCH_LAN969X clk: clk-apple-nco: Add NULL check in applnco_probe clk: starfive: jh7110-pll: Mark the probe function as __init clk: sophgo: avoid integer overflow in sg2042_pll_recalc_rate() clk: tegra: use clamp() in tegra_bpmp_clk_determine_rate() clk: cdce925: make regmap_cdce925_bus constant clk: Drop explicit initialization of struct i2c_device_id::driver_data to 0 clk: clk-qoriq: Replace of_node_put() with __free() clk: Remove unused clk_hw_rate_is_protected * clk-mediatek: clk: en7523: map io region in a single block clk: en7523: move en7581_reset_register() in en7581_clk_hw_init() clk: en7523: fix estimation of fixed rate for EN7581 clk: en7523: introduce chip_scu regmap clk: en7523: move clock_register in hw_init callback clk: en7523: remove REG_PCIE*_{MEM,MEM_MASK} configuration dt-bindings: clock: airoha: Update reg mapping for EN7581 SoC. clk: mediatek: Add drivers for MT6735 syscon clock and reset controllers dt-bindings: clock: mediatek: Add bindings for MT6735 syscon clock and reset controllers clk: mediatek: mt6735-apmixedsys: Fix an error handling path in clk_mt6735_apmixed_probe() clk: ralink: mtmips: add mmc related clocks for SoCs MT7620, MT7628 and MT7688 clk: ralink: mtmips: fix clocks probe order in oldest ralink SoCs clk: ralink: mtmips: fix clock plan for Ralink SoC RT3883 clk: mediatek: clk-mt8188-topckgen: Remove univpll from parents of mfg_core_tmp clk: mediatek: Add drivers for MediaTek MT6735 main clock and reset drivers dt-bindings: clock: Add MediaTek MT6735 clock and reset bindings clk: mediatek: drop two dead config options * clk-kunit: clk: Allow kunit tests to run without OF_OVERLAY enabled clk: test: Add KUnit tests for clock-assigned-rates{-u64} DT properties of: kunit: Extract some overlay boiler plate into macros clk: test: Add test managed of_clk_add_hw_provider() * clk-xilinx: clk: clocking-wizard: move dynamic reconfig setup behind flag dt-bindings: clock: xilinx: describe whether dynamic reconfig is enabled clk: clocking-wizard: move clock registration to separate function clk: clocking-wizard: use devres versions of clk_hw API clk: clocking-wizard: use newer clk_hw API clk: clocking-wizard: simplify probe/remove with devres helpers * clk-fixed-gate: clk: clk-gpio: add driver for gated-fixed-clocks clk: clk-gpio: use dev_err_probe for gpio-get failure clk: clk-gpio: update documentation for gpio-gate clock dt-bindings: clocks: add binding for gated-fixed-clocks
2024-11-18clk: clk-loongson2: Fix potential buffer overflow in flexible-array member ↵Gustavo A. R. Silva
access Flexible-array member `hws` in `struct clk_hw_onecell_data` is annotated with the `counted_by()` attribute. This means that when memory is allocated for this array, the _counter_, which in this case is member `num` in the flexible structure, should be set to the maximum number of elements the flexible array can contain, or fewer. In this case, the total number of elements for the flexible array is determined by variable `clks_num` when allocating heap space via `devm_kzalloc()`, as shown below: 289 struct loongson2_clk_provider *clp; ... 296 for (p = data; p->name; p++) 297 clks_num++; 298 299 clp = devm_kzalloc(dev, struct_size(clp, clk_data.hws, clks_num), 300 GFP_KERNEL); So, `clp->clk_data.num` should be set to `clks_num` or less, and not exceed `clks_num`, as is currently the case. Otherwise, if data is written into `clp->clk_data.hws[clks_num]`, the instrumentation provided by the compiler won't detect the overflow, leading to a memory corruption bug at runtime. Fix this issue by setting `clp->clk_data.num` to `clks_num`. Fixes: 9796ec0bd04b ("clk: clk-loongson2: Refactor driver for adding new platforms") Cc: stable@vger.kernel.org Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Link: https://lore.kernel.org/r/ZzaN5MpmMr0hwHw9@kspp Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2024-11-18clk: Fix invalid execution of clk_set_rateChuan Liu
Some clocks have rates that can be changed elsewhere, so add a flag CLK_GET_RATE_NOCACHE(such as scmi_clk) to these clocks to ensure that the real-time rate is obtained. When clk_set_rate is called, it is returned if the request to set rate is consistent with the current rate. Getting the current rate in clk_set_rate returns the rate stored in clk_core. CLK_GET_RATE_NOCACHE does not take effect here. Signed-off-by: Chuan Liu <chuan.liu@amlogic.com> Link: https://lore.kernel.org/r/20240910-fix_clk-v1-1-111443baaeaa@amlogic.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2024-11-18clk: clk-loongson2: Fix memory corruption bug in struct loongson2_clk_providerGustavo A. R. Silva
Some heap space is allocated for the flexible structure `struct clk_hw_onecell_data` and its flexible-array member `hws` through the composite structure `struct loongson2_clk_provider` in function `loongson2_clk_probe()`, as shown below: 289 struct loongson2_clk_provider *clp; ... 296 for (p = data; p->name; p++) 297 clks_num++; 298 299 clp = devm_kzalloc(dev, struct_size(clp, clk_data.hws, clks_num), 300 GFP_KERNEL); Then some data is written into the flexible array: 350 clp->clk_data.hws[p->id] = hw; This corrupts `clk_lock`, which is the spinlock variable immediately following the `clk_data` member in `struct loongson2_clk_provider`: struct loongson2_clk_provider { void __iomem *base; struct device *dev; struct clk_hw_onecell_data clk_data; spinlock_t clk_lock; /* protect access to DIV registers */ }; The problem is that the flexible structure is currently placed in the middle of `struct loongson2_clk_provider` instead of at the end. Fix this by moving `struct clk_hw_onecell_data clk_data;` to the end of `struct loongson2_clk_provider`. Also, add a code comment to help prevent this from happening again in case new members are added to the structure in the future. This change also fixes the following -Wflex-array-member-not-at-end warning: drivers/clk/clk-loongson2.c:32:36: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end] Fixes: 9796ec0bd04b ("clk: clk-loongson2: Refactor driver for adding new platforms") Cc: stable@vger.kernel.org Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Link: https://lore.kernel.org/r/ZzZ-cd_EFXs6qFaH@kspp Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2024-11-18clk: lan966x: make it selectable for ARCH_LAN969XRobert Marko
LAN969x uses the same LAN966x clock driver so make it selectable for ARCH_LAN969X. Signed-off-by: Robert Marko <robert.marko@sartura.hr> Link: https://lore.kernel.org/r/20241108112355.20251-1-robert.marko@sartura.hr Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2024-11-18bnxt_en: Add FW trace coredump segments to the coredumpShruti Parab
The FW trace coredump segments are very similar to the context memory segments in the previous patch. The main difference is to call HWRM_DBG_LOG_BUFFER_FLUSH to flush the FW data to host memory and to include an additional record in the coredump that contains the head and tail information of the trace data. Reviewed-by: Hongguang Gao <hongguang.gao@broadcom.com> Signed-off-by: Shruti Parab <shruti.parab@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Link: https://patch.msgid.link/20241115151438.550106-12-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-18bnxt_en: Add a new ethtool -W dump flagMichael Chan
Add a new ethtool -W dump flag (2) to include driver coredump segments. This patch adds the host backing store context memory pages used by the chip and FW to store various states to the coredump. The pages for each context memory type is dumped into a separate coredump segment. Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com> Reviewed-by: Selvin Thyparampil Xavier <selvin.xavier@broadcom.com> Reviewed-by: Shruti Parab <shruti.parab@broadcom.com> Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Reviewed-by: Saravanan Vajravel <saravanan.vajravel@broadcom.com> Reviewed-by: Kashyap Desai <kashyap.desai@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Link: https://patch.msgid.link/20241115151438.550106-11-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-18bnxt_en: Add 2 parameters to bnxt_fill_coredump_seg_hdr()Shruti Parab
Pass the component ID and segment ID to this function to create the coredump segment header. This will be needed in the next patches to create more segments for the coredump. Reviewed-by: Hongguang Gao <hongguang.gao@broadcom.com> Signed-off-by: Shruti Parab <shruti.parab@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Link: https://patch.msgid.link/20241115151438.550106-10-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-18bnxt_en: Add functions to copy host context memorySreekanth Reddy
Host context memory is used by the newer chips to store context information for various L2 and RoCE states and FW logs. This information will be useful for debugging. This patch adds the functions to copy all pages of a context memory type to a contiguous buffer. The next patches will include the context memory dump during ethtool -w coredump. Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Reviewed-by: Hongguang Gao <hongguang.gao@broadcom.com> Co-developed-by: Shruti Parab <shruti.parab@broadcom.com> Signed-off-by: Shruti Parab <shruti.parab@broadcom.com> Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Link: https://patch.msgid.link/20241115151438.550106-9-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-18bnxt_en: Do not free FW log context memoryHongguang Gao
If FW supports appending new FW logs to an offset in the context memory after FW reset, then do not free this type of context memory during reset. The driver will provide the initial offset to the FW when configuring this type of context memory. This way, we don't lose the older FW logs after reset. Signed-off-by: Hongguang Gao <hongguang.gao@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Link: https://patch.msgid.link/20241115151438.550106-8-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-18bnxt_en: Manage the FW trace context memoryShruti Parab
The FW trace memory pages will be added to the ethtool -w coredump in later patches. In addition to the raw data, the driver has to add a header to provide the head and tail information on each FW trace log segment when creating the coredump. The FW sends an async message to the driver after DMAing a chunk of logs to the context memory to indicate the last offset containing the tail of the logs. The driver needs to keep track of that. Reviewed-by: Hongguang Gao <hongguang.gao@broadcom.com> Signed-off-by: Shruti Parab <shruti.parab@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Link: https://patch.msgid.link/20241115151438.550106-7-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-18bnxt_en: Allocate backing store memory for FW trace logsShruti Parab
Allocate the new FW trace log backing store context memory types if they are supported by the FW. FW debug logs are DMA'ed to the host backing store memory when the on-chip buffers are full. If host memory cannot be allocated for these memory types, the driver will not abort. Reviewed-by: Hongguang Gao <hongguang.gao@broadcom.com> Signed-off-by: Shruti Parab <shruti.parab@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Link: https://patch.msgid.link/20241115151438.550106-6-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-18bnxt_en: Add a 'force' parameter to bnxt_free_ctx_mem()Hongguang Gao
If 'force' is false, it will keep the memory pages and all data structures for the context memory type if the memory is valid. This patch always passes true for the 'force' parameter so there is no change in behavior. Later patches will adjust the 'force' parameter for the FW log context memory types so that the logs will not be reset after FW reset. Signed-off-by: Hongguang Gao <hongguang.gao@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Link: https://patch.msgid.link/20241115151438.550106-5-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-18bnxt_en: Refactor bnxt_free_ctx_mem()Hongguang Gao
Add a new function bnxt_free_one_ctx_mem() to free one context memory type. bnxt_free_ctx_mem() now calls the new function in the loop to free each context memory type. There is no change in behavior. Later patches will further make use of the new function. Signed-off-by: Hongguang Gao <hongguang.gao@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Link: https://patch.msgid.link/20241115151438.550106-4-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-18bnxt_en: Add mem_valid bit to struct bnxt_ctx_mem_typeShruti Parab
Add a new bit to struct bnxt_ctx_mem_type to indicate that host memory has been successfully allocated for this context memory type. In the next patches, we'll be adding some additional context memory types for FW debugging/logging. If memory cannot be allocated for any of these new types, we will not abort and the cleared mem_valid bit will indicate to skip configuring the memory type. Reviewed-by: Hongguang Gao <hongguang.gao@broadcom.com> Signed-off-by: Shruti Parab <shruti.parab@broadcom.com> Signed-of-by: Michael Chan <michael.chan@broadcom.com> Link: https://patch.msgid.link/20241115151438.550106-3-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-18bnxt_en: Update firmware interface spec to 1.10.3.85Michael Chan
The major change is the new firmware command to flush the FW debug logs to the host backing store context memory buffers. Reviewed-by: Hongguang Gao <hongguang.gao@broadcom.com> Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Link: https://patch.msgid.link/20241115151438.550106-2-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-18Input: cypress-sf - constify struct i2c_device_idChristophe JAILLET
'struct i2c_device_id' is not modified in this driver. Constifying this structure moves some data to a read-only section, so increase overall security. On a x86_64, with allmodconfig: Before: ====== text data bss dec hex filename 6438 618 0 7056 1b90 drivers/input/keyboard/cypress-sf.o After: ===== text data bss dec hex filename 6502 554 0 7056 1b90 drivers/input/keyboard/cypress-sf.o Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/4bc3e3b4d10223d9df850fe4ba48f1cefd197082.1731689418.git.christophe.jaillet@wanadoo.fr Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2024-11-18wireguard: device: support big tcp GSODaniel Borkmann
Advertise GSO_MAX_SIZE as TSO max size in order support BIG TCP for wireguard. This helps to improve wireguard performance a bit when enabled as it allows wireguard to aggregate larger skbs in wg_packet_consume_data_done() via napi_gro_receive(), but also allows the stack to build larger skbs on xmit where the driver then segments them before encryption inside wg_xmit(). We've seen a 15% improvement in TCP stream performance. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Link: https://patch.msgid.link/20241117212030.629159-5-Jason@zx2c4.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-18wireguard: allowedips: remove redundant selftest callDheeraj Reddy Jonnalagadda
This commit fixes a useless call issue detected by Coverity (CID 1508092). The call to horrible_allowedips_lookup_v4 is unnecessary as its return value is never checked. Signed-off-by: Dheeraj Reddy Jonnalagadda <dheeraj.linuxdev@gmail.com> Fixes: e7096c131e51 ("net: WireGuard secure network tunnel") Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Link: https://patch.msgid.link/20241117212030.629159-3-Jason@zx2c4.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-18wireguard: device: omit unnecessary memset of netdev private dataTobias Klauser
The memory for netdev_priv is allocated using kvzalloc in alloc_netdev_mqs before rtnl_link_ops->setup is called so there is no need to zero it again in wg_setup. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Link: https://patch.msgid.link/20241117212030.629159-2-Jason@zx2c4.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-18net/fungible: Remove unused fun_create_queueDr. David Alan Gilbert
fun_create_queue was added in 2022 by commit e1ffcc66818f ("net/fungible: Add service module for Fungible drivers") but hasn't been used. Remove it. Also remove the static helper functions it was the only user of. Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-18Revert "net: ethtool: Avoid thousands of -Wflex-array-member-not-at-end ↵Kees Cook
warnings" This reverts commit 3bd9b9abdf1563a22041b7255baea6d449902f1a. We cannot use the new tagged struct group because it throws C++ errors even under "extern C". Signed-off-by: Kees Cook <kees@kernel.org> Link: https://patch.msgid.link/20241115204308.3821419-1-kees@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-18stmmac: dwmac-intel-plat: remove redundant dwmac->data check in probeVitalii Mordan
The driver’s compatibility with devices is confirmed earlier in platform_match(). Since reaching probe means the device is valid, the extra check can be removed to simplify the code. Signed-off-by: Vitalii Mordan <mordan@ispras.ru> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-18net: txgbe: fix null pointer to pcsJiawen Wu
For 1000BASE-X or SGMII interface mode, the PCS also need to be selected. Only return null pointer when there is a copper NIC with external PHY. Fixes: 02b2a6f91b90 ("net: txgbe: support copper NIC with external PHY") Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com> Link: https://patch.msgid.link/20241115073508.1130046-1-jiawenwu@trustnetic.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-18net: txgbe: remove GPIO interrupt controllerJiawen Wu
Since the GPIO interrupt controller is always not working properly, we need to constantly add workaround to cope with hardware deficiencies. So just remove GPIO interrupt controller, and let the SFP driver poll the GPIO status. Fixes: b4a2496c17ed ("net: txgbe: fix GPIO interrupt blocking") Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com> Link: https://patch.msgid.link/20241115071527.1129458-1-jiawenwu@trustnetic.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-18eth: fbnic: add RPC hardware statisticsSanman Pradhan
Report Rx parser statistics via ethtool -S. The parser stats are 32b, so we need to add refresh to the service task to make sure we don't miss overflows. Signed-off-by: Sanman Pradhan <sanman.p211993@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://patch.msgid.link/20241115015344.757567-6-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-18eth: fbnic: add PCIe hardware statisticsSanman Pradhan
Add PCIe hardware statistics support to the fbnic driver. These stats provide insight into PCIe transaction performance and error conditions. Which includes, read/write and completion TLP counts and DWORD counts and debug counters for tag, completion credit and NP credit exhaustion The stats are exposed via debugfs and can be used to monitor PCIe performance and debug PCIe issues. Signed-off-by: Sanman Pradhan <sanman.p211993@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://patch.msgid.link/20241115015344.757567-5-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-18eth: fbnic: add basic debugfs structureJakub Kicinski
Add the usual debugfs structure: fbnic/ $pci-id/ device-fileA device-fileB This patch only adds the directories, subsequent changes will add files. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Link: https://patch.msgid.link/20241115015344.757567-4-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-18eth: fbnic: add missing header guardsJakub Kicinski
While adding the SPDX headers I noticed we're also missing a header guard. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Link: https://patch.msgid.link/20241115015344.757567-3-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-18eth: fbnic: add missing SPDX headersJakub Kicinski
Paolo noticed that we are missing SPDX headers, add them. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Link: https://patch.msgid.link/20241115015344.757567-2-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-18eth: fbnic: don't disable the PCI device twiceJakub Kicinski
We use pcim_enable_device(), there is no need to call pci_disable_device(). Fixes: 546dd90be979 ("eth: fbnic: Add scaffolding for Meta's NIC driver") Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20241115014809.754860-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-18rocker: fix link status detection in rocker_carrier_init()Dmitry Antipov
Since '1 << rocker_port->pport' may be undefined for port >= 32, cast the left operand to 'unsigned long long' like it's done in 'rocker_port_set_enable()' above. Compile tested only. Found by Linux Verification Center (linuxtesting.org) with SVACE. Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru> Link: https://patch.msgid.link/20241114151946.519047-1-dmantipov@yandex.ru Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-18net: wwan: t7xx: Change PM_AUTOSUSPEND_MS to 5000Jack Wu
Because optimizing the power consumption of t7XX, change auto suspend time to 5000. The Tests uses a script to loop through the power_state of t7XX. (for example: /sys/bus/pci/devices/0000\:72\:00.0/power_state) * If Auto suspend is 20 seconds, test script show power_state have 0~5% of the time was in D3 state when host don't have data packet transmission. * Changed auto suspend time to 5 seconds, test script show power_state have 50%~80% of the time was in D3 state when host don't have data packet transmission. We tested Fibocom FM350 and our products using the t7xx and they all benefited from this. Signed-off-by: Jack Wu <wojackbb@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Sergey Ryazanov <ryazanov.s.a@gmail.com> Link: https://patch.msgid.link/20241114102002.481081-1-wojackbb@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-18Merge tag 'for-linus-6.13-rc1-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen updates from Juergen Gross: - a series for booting as a PVH guest, doing some cleanups after the previous work to make PVH boot code position independent - a fix of the xenbus driver avoiding a leak in an error case * tag 'for-linus-6.13-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen: Fix the issue of resource not being properly released in xenbus_dev_probe() x86/pvh: Avoid absolute symbol references in .head.text x86/xen: Avoid relocatable quantities in Xen ELF notes x86/pvh: Omit needless clearing of phys_base x86/pvh: Use correct size value in GDT descriptor x86/pvh: Call C code via the kernel virtual mapping
2024-11-18Merge tag 'arm64-upstream' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 updates from Catalin Marinas: - Support for running Linux in a protected VM under the Arm Confidential Compute Architecture (CCA) - Guarded Control Stack user-space support. Current patches follow the x86 ABI of implicitly creating a shadow stack on clone(). Subsequent patches (already on the list) will add support for clone3() allowing finer-grained control of the shadow stack size and placement from libc - AT_HWCAP3 support (not running out of HWCAP2 bits yet but we are getting close with the upcoming dpISA support) - Other arch features: - In-kernel use of the memcpy instructions, FEAT_MOPS (previously only exposed to user; uaccess support not merged yet) - MTE: hugetlbfs support and the corresponding kselftests - Optimise CRC32 using the PMULL instructions - Support for FEAT_HAFT enabling ARCH_HAS_NONLEAF_PMD_YOUNG - Optimise the kernel TLB flushing to use the range operations - POE/pkey (permission overlays): further cleanups after bringing the signal handler in line with the x86 behaviour for 6.12 - arm64 perf updates: - Support for the NXP i.MX91 PMU in the existing IMX driver - Support for Ampere SoCs in the Designware PCIe PMU driver - Support for Marvell's 'PEM' PCIe PMU present in the 'Odyssey' SoC - Support for Samsung's 'Mongoose' CPU PMU - Support for PMUv3.9 finer-grained userspace counter access control - Switch back to platform_driver::remove() now that it returns 'void' - Add some missing events for the CXL PMU driver - Miscellaneous arm64 fixes/cleanups: - Page table accessors cleanup: type updates, drop unused macros, reorganise arch_make_huge_pte() and clean up pte_mkcont(), sanity check addresses before runtime P4D/PUD folding - Command line override for ID_AA64MMFR0_EL1.ECV (advertising the FEAT_ECV for the generic timers) allowing Linux to boot with firmware deployments that don't set SCTLR_EL3.ECVEn - ACPI/arm64: tighten the check for the array of platform timer structures and adjust the error handling procedure in gtdt_parse_timer_block() - Optimise the cache flush for the uprobes xol slot (skip if no change) and other uprobes/kprobes cleanups - Fix the context switching of tpidrro_el0 when kpti is enabled - Dynamic shadow call stack fixes - Sysreg updates - Various arm64 kselftest improvements * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (168 commits) arm64: tls: Fix context-switching of tpidrro_el0 when kpti is enabled kselftest/arm64: Try harder to generate different keys during PAC tests kselftest/arm64: Don't leak pipe fds in pac.exec_sign_all() arm64/ptrace: Clarify documentation of VL configuration via ptrace kselftest/arm64: Corrupt P0 in the irritator when testing SSVE acpi/arm64: remove unnecessary cast arm64/mm: Change protval as 'pteval_t' in map_range() kselftest/arm64: Fix missing printf() argument in gcs/gcs-stress.c kselftest/arm64: Add FPMR coverage to fp-ptrace kselftest/arm64: Expand the set of ZA writes fp-ptrace does kselftets/arm64: Use flag bits for features in fp-ptrace assembler code kselftest/arm64: Enable build of PAC tests with LLVM=1 kselftest/arm64: Check that SVCR is 0 in signal handlers selftests/mm: Fix unused function warning for aarch64_write_signal_pkey() kselftest/arm64: Fix printf() compiler warnings in the arm64 syscall-abi.c tests kselftest/arm64: Fix printf() warning in the arm64 MTE prctl() test kselftest/arm64: Fix printf() compiler warnings in the arm64 fp tests kselftest/arm64: Fix build with stricter assemblers arm64/scs: Drop unused prototype __pi_scs_patch_vmlinux() arm64/scs: Deal with 64-bit relative offsets in FDE frames ...
2024-11-18Merge tag 'mips_6.13' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux Pull MIPS updates from Thomas Bogendoerfer: "Just cleanups and fixes" * tag 'mips_6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: mips: dts: realtek: Add I2C controllers mips: dts: realtek: Add syscon-reboot node MIPS: loongson3_defconfig: Enable blk_dev_nvme by default MIPS: loongson3_defconfig: Update configs dependencies MAINTAINERS: Remove linux-mips.org references MAINTAINERS: Retire Ralf Baechle TC: Fix the wrong format specifier MIPS: kernel: proc: Use str_yes_no() helper function MIPS: mobileye: eyeq6h-epm6: Use eyeq6h in the board device tree mips: bmips: bcm6358/6368: define required brcm,bmips-cbr-reg MIPS: Allow using more than 32-bit addresses for reset vectors when possible mips: asm: fix warning when disabling MIPS_FP_SUPPORT mips: sgi-ip22: Replace "s[n]?printf" with sysfs_emit in sysfs callbacks
2024-11-18Merge tag 's390-6.13-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 updates from Heiko Carstens: - Add firmware sysfs interface which allows user space to retrieve the dump area size of the machine - Add 'measurement_chars_full' CHPID sysfs attribute to make the complete associated Channel-Measurements Characteristics Block available - Add virtio-mem support - Move gmap aka KVM page fault handling from the main fault handler to KVM code. This is the first step to make s390 KVM page fault handling similar to other architectures. With this first step the main fault handler does not have any special handling anymore, and therefore convert it to support LOCK_MM_AND_FIND_VMA - With gcc 14 s390 support for flag output operand support for inline assemblies was added. This allows for several optimizations: - Provide a cmpxchg inline assembly which makes use of this, and provide all variants of arch_try_cmpxchg() so that the compiler can generate slightly better code - Convert a few cmpxchg() loops to try_cmpxchg() loops - Similar to x86 add a CC_OUT() helper macro (and other macros), and convert all inline assemblies to make use of them, so that depending on compiler version better code can be generated - List installed host-key hashes in sysfs if the machine supports the Query Ultravisor Keys UVC - Add 'Retrieve Secret' ioctl which allows user space in protected execution guests to retrieve previously stored secrets from the Ultravisor - Add pkey-uv module which supports the conversion of Ultravisor retrievable secrets to protected keys - Extend the existing paes cipher to exploit the full AES-XTS hardware acceleration introduced with message-security assist extension 10 - Convert hopefully all sysfs show functions to use sysfs_emit() so that the constant flow of such patches stop - For PCI devices make use of the newly added Topology ID attribute to enable whole card multi-function support despite the change to PCHID per port. Additionally improve the overall robustness and usability of the multifunction support - Various other small improvements, fixes, and cleanups * tag 's390-6.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (133 commits) s390/cio/ioasm: Convert to use flag output macros s390/cio/qdio: Convert to use flag output macros s390/sclp: Convert to use flag output macros s390/dasd: Convert to use flag output macros s390/boot/physmem: Convert to use flag output macros s390/pci: Convert to use flag output macros s390/kvm: Convert to use flag output macros s390/extmem: Convert to use flag output macros s390/string: Convert to use flag output macros s390/diag: Convert to use flag output macros s390/irq: Convert to use flag output macros s390/smp: Convert to use flag output macros s390/uv: Convert to use flag output macros s390/pai: Convert to use flag output macros s390/mm: Convert to use flag output macros s390/cpu_mf: Convert to use flag output macros s390/cpcmd: Convert to use flag output macros s390/topology: Convert to use flag output macros s390/time: Convert to use flag output macros s390/pageattr: Convert to use flag output macros ...
2024-11-18Merge tag 'for-6.13/block-20241118' of git://git.kernel.dk/linuxLinus Torvalds
Pull block updates from Jens Axboe: - NVMe updates via Keith: - Use uring_cmd helper (Pavel) - Host Memory Buffer allocation enhancements (Christoph) - Target persistent reservation support (Guixin) - Persistent reservation tracing (Guixen) - NVMe 2.1 specification support (Keith) - Rotational Meta Support (Matias, Wang, Keith) - Volatile cache detection enhancment (Guixen) - MD updates via Song: - Maintainers update - raid5 sync IO fix - Enhance handling of faulty and blocked devices - raid5-ppl atomic improvement - md-bitmap fix - Support for manually defining embedded partition tables - Zone append fixes and cleanups - Stop sending the queued requests in the plug list to the driver ->queue_rqs() handle in reverse order. - Zoned write plug cleanups - Cleanups disk stats tracking and add support for disk stats for passthrough IO - Add preparatory support for file system atomic writes - Add lockdep support for queue freezing. Already found a bunch of issues, and some fixes for that are in here. More will be coming. - Fix race between queue stopping/quiescing and IO queueing - ublk recovery improvements - Fix ublk mmap for 64k pages - Various fixes and cleanups * tag 'for-6.13/block-20241118' of git://git.kernel.dk/linux: (118 commits) MAINTAINERS: Update git tree for mdraid subsystem block: make struct rq_list available for !CONFIG_BLOCK block/genhd: use seq_put_decimal_ull for diskstats decimal values block: don't reorder requests in blk_mq_add_to_batch block: don't reorder requests in blk_add_rq_to_plug block: add a rq_list type block: remove rq_list_move virtio_blk: reverse request order in virtio_queue_rqs nvme-pci: reverse request order in nvme_queue_rqs btrfs: validate queue limits block: export blk_validate_limits nvmet: add tracing of reservation commands nvme: parse reservation commands's action and rtype to string nvmet: report ns's vwc not present md/raid5: Increase r5conf.cache_name size block: remove the ioprio field from struct request block: remove the write_hint field from struct request nvme: check ns's volatile write cache not present nvme: add rotational support nvme: use command set independent id ns if available ...
2024-11-18Merge tag 'ata-6.13-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux Pull ata updates from Niklas Cassel: - Fix typos in comments (Yan Zhen) - Remove unused macro definitions (Damien Le Moal) - Switch back to the .remove() callback (Uwe Kleine-König) - Make use of the get_unaligned_be24() helper instead of open coding (Andy Shevchenko) - Refactor and cleanup ata_scsi_simulate() command emulation, such that all commands use ata_scsi_rbuf_fill() with its own callback (Damien Le Moal) - Improve ata_scsi_simulate() command emulation by accurately setting the SCSI command residual (number of bytes not filled) in the command reply (Damien Le Moal) - Add missing iommus property in ahci-platform device tree binding (Frank Wunderlich) * tag 'ata-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux: dt-bindings: ata: ahci-platform: add missing iommus property ata: libata-scsi: Return residual for emulated SCSI commands ata: libata-scsi: Remove struct ata_scsi_args ata: libata-scsi: Document all VPD page inquiry actors ata: libata-scsi: Refactor ata_scsiop_maint_in() ata: libata-scsi: Refactor ata_scsiop_read_cap() ata: libata-scsi: Refactor ata_scsi_simulate() ata: libata-scsi: Refactor scsi_6_lba_len() with use of get_unaligned_be24() ata: Switch back to struct platform_driver::remove() ata: libata: Remove unused macro definitions ata: Fix typos in the comment
2024-11-18pinctrl: airoha: Use unsigned long for bit searchKees Cook
Instead of risking alignment problems and causing (false positive) array bound warnings when casting a u32 to (64-bit) unsigned long, just use a native unsigned long for doing bit searches. Avoids warning with GCC 15's -Warray-bounds -fdiagnostics-details: In file included from ../include/linux/bitmap.h:11, from ../include/linux/cpumask.h:12, from ../arch/x86/include/asm/paravirt.h:21, from ../arch/x86/include/asm/irqflags.h:80, from ../include/linux/irqflags.h:18, from ../include/linux/spinlock.h:59, from ../include/linux/irq.h:14, from ../include/linux/irqchip/chained_irq.h:10, from ../include/linux/gpio/driver.h:8, from ../drivers/pinctrl/mediatek/pinctrl-airoha.c:11: In function 'find_next_bit', inlined from 'airoha_irq_handler' at ../drivers/pinctrl/mediatek/pinctrl-airoha.c:2394:3: ../include/linux/find.h:65:23: error: array subscript 'long unsigned int[0]' is partly outside array bounds of 'u32[1]' {aka 'unsigned int[1]'} [-Werror=array-bounds=] 65 | val = *addr & GENMASK(size - 1, offset); | ^~~~~ ../drivers/pinctrl/mediatek/pinctrl-airoha.c: In function 'airoha_irq_handler': ../drivers/pinctrl/mediatek/pinctrl-airoha.c:2387:21: note: object 'status' of size 4 2387 | u32 status; | ^~~~~~ Signed-off-by: Kees Cook <kees@kernel.org> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/20241117114534.work.292-kees@kernel.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2024-11-18pinctrl: k210: Undef K210_PC_DEFAULTzhang jiao
When the temporary macro K210_PC_DEFAULT is not needed anymore, use its name in the #undef statement instead of the incorrect "DEFAULT" name. Fixes: d4c34d09ab03 ("pinctrl: Add RISC-V Canaan Kendryte K210 FPIOA driver") Signed-off-by: zhang jiao <zhangjiao2@cmss.chinamobile.com> Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Link: https://lore.kernel.org/20241113071201.5440-1-zhangjiao2@cmss.chinamobile.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2024-11-18Merge branch 'for-6.13/bpf' into for-linusJiri Kosina
- improvement of the way hid-bpf coexists with specific drivers (others than hid-generic) that are already bound to devices (Benjamin Tissoires)
generated by cgit (git 2.34.1) at 2025-09-11 22:32:33 +0000