summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2017-07-25iommu/amd: Enable ga_log_intr when enabling guest_modeSuravee Suthikulpanit
IRTE[GALogIntr] bit should set when enabling guest_mode, which enables IOMMU to generate entry in GALog when IRTE[IsRun] is not set, and send an interrupt to notify IOMMU driver. Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Cc: Joerg Roedel <jroedel@suse.de> Cc: stable@vger.kernel.org # v4.9+ Fixes: d98de49a53e48 ('iommu/amd: Enable vAPIC interrupt remapping mode by default') Signed-off-by: Joerg Roedel <jroedel@suse.de>
2017-07-25Merge branch 'for-joerg/arm-smmu/fixes' of ↵Joerg Roedel
git://git.kernel.org/pub/scm/linux/kernel/git/will/linux into iommu/fixes
2017-07-25Merge branch 'linux-4.13' of git://github.com/skeggsb/linux into drm-fixesDave Airlie
two more fixes for issues nouveau found in fedora 26. * 'linux-4.13' of git://github.com/skeggsb/linux: drm/nouveau/bar/gf100: fix access to upper half of BAR2 drm/nouveau/disp/nv50-: bump max chans to 21
2017-07-25drm/nouveau/bar/gf100: fix access to upper half of BAR2Ben Skeggs
Bit 30 being set causes the upper half of BAR2 to stay in physical mode, mapped over the end of VRAM, even when the rest of the BAR has been set to virtual mode. We inherited our initial value from RM, but I'm not aware of any reason we need to keep it that way. This fixes severe GPU hang/lockup issues revealed by Wayland on F26. Shout-out to NVIDIA for the quick response with the potential cause! Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Cc: stable@vger.kernel.org # 4.3+
2017-07-25drm/nouveau/disp/nv50-: bump max chans to 21Ilia Mirkin
GP102's cursors go from chan 17..20. Increase the array size to hold their data properly. Fixes: e50fcff15f ("drm/nouveau/disp/gp102: fix cursor/overlay immediate channel indices") Cc: stable@vger.kernel.org # v4.10+ Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2017-07-25drm/i915/gvt: Extend KBL platform support in GVT-gJian Jun Chen
Extend KBL platform support in GVT-g. Validation tests are done on KBL server and KBL NUC. Both show the same quality. Signed-off-by: Jian Jun Chen <jian.jun.chen@intel.com> Cc: Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
2017-07-24scsi: qedi: Fix return code in qedi_ep_connect()Dan Carpenter
We shouldn't be writing over the "ret" variable. It means we return ERR_PTR(0) which is NULL and it results in a NULL dereference in the caller. Fixes: ace7f46ba5fd ("scsi: qedi: Add QLogic FastLinQ offload iSCSI driver framework.") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-07-24scsi: lpfc: fix linking against modular NVMe supportArnd Bergmann
When LPFC is built-in but NVMe is a loadable module, we fail to link the kernel: drivers/scsi/built-in.o: In function `lpfc_nvme_create_localport': (.text+0x156a82): undefined reference to `nvme_fc_register_localport' drivers/scsi/built-in.o: In function `lpfc_nvme_destroy_localport': (.text+0x156eaa): undefined reference to `nvme_fc_unregister_remoteport' We can avoid this either by forcing lpfc to be a module, or by disabling NVMe support in this case. This implements the former. Fixes: 7d7080335f8d ("scsi: lpfc: Finalize Kconfig options for nvme") Cc: stable@vger.kernel.org Link: https://patchwork.kernel.org/patch/9636569/ Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-07-24scsi: scsi_transport_fc: return -EBUSY for deleted vportHannes Reinecke
When trying to delete a vport via 'vport_delete' sysfs attribute we should be checking if the port is already in state VPORT_DELETING; if so there's no need to do anything. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-07-24scsi: libcxgbi: add check for valid cxgbi_task_dataVarun Prakash
In error case it is possible that ->cleanup_task() gets called without calling ->alloc_pdu() in this case cxgbi_task_data is not valid, so add a check for for valid cxgbi_task_data in cxgbi_cleanup_task(). Signed-off-by: Varun Prakash <varun@chelsio.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-07-24scsi: aic7xxx: fix firmware build with O=pathJakub Kicinski
Building firmware with O=path was apparently broken in aic7 for ever. Message of the previous commit to the Makefile (from 2008) mentions this unfortunate state of affairs already. Fix this, mostly to make randconfig builds more reliable. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-07-24scsi: megaraid_sas: fix memleak in megasas_alloc_cmdlist_fusionShu Wang
Found this issue by kmemleak, a few kb mem was leaked in megasas_alloc_cmdlist_fusion when kzalloc failed for one megasas_cmd_fusion allocation. unreferenced object 0xffff88045dbd2000 (size 8192): comm "systemd-udevd", pid 323, jiffies 4294671759 (age 49.008s) backtrace: [<ffffffff8176166a>] kmemleak_alloc+0x4a/0xa0 [<ffffffff812186a8>] __kmalloc+0xe8/0x220 [<ffffffffc0060594>] megasas_alloc_cmdlist_fusion+0x34/0xe0 [megaraid_sas] (gdb) list *megasas_alloc_cmdlist_fusion+0x34 0xd5c4 is in megasas_alloc_cmdlist_fusion (drivers/scsi/megaraid/megaraid_sas_fusion.c:443). [<ffffffffc0060ca5>] megasas_alloc_cmds_fusion+0x25/0x410 [megaraid_sas] [<ffffffffc0061edf>] megasas_init_adapter_fusion+0x21f/0x640 [megaraid_sas] [<ffffffffc005df17>] megasas_init_fw+0x357/0xd30 [megaraid_sas] [<ffffffffc005ef26>] megasas_probe_one.part.33+0x636/0x1100 [megaraid_sas] [<ffffffffc005fa36>] megasas_probe_one+0x46/0xc0 [megaraid_sas] [<ffffffff813d2ca5>] local_pci_probe+0x45/0xa0 [<ffffffff813d4222>] pci_device_probe+0x192/0x1b0 [<ffffffff814e3658>] driver_probe_device+0x2a8/0x460 [<ffffffff814e38ed>] __driver_attach+0xdd/0xe0 [<ffffffff814e124c>] bus_for_each_dev+0x6c/0xc0 [<ffffffff814e2dde>] driver_attach+0x1e/0x20 [<ffffffff814e2775>] bus_add_driver+0x45/0x270 [<ffffffff814e4400>] driver_register+0x60/0xe0 unreferenced object 0xffff880454ce3600 (size 192): backtrace: [<ffffffff8176166a>] kmemleak_alloc+0x4a/0xa0 [<ffffffff8121801a>] kmem_cache_alloc_trace+0xca/0x1d0 [<ffffffffc00605d7>] megasas_alloc_cmdlist_fusion+0x77/0xe0 [megaraid_sas] (gdb) list *megasas_alloc_cmdlist_fusion+0x77 0xd607 is in megasas_alloc_cmdlist_fusion (drivers/scsi/megaraid/megaraid_sas_fusion.c:450). [<ffffffffc0060ca5>] megasas_alloc_cmds_fusion+0x25/0x410 [megaraid_sas] [<ffffffffc0061edf>] megasas_init_adapter_fusion+0x21f/0x640 [megaraid_sas] [<ffffffffc005df17>] megasas_init_fw+0x357/0xd30 [megaraid_sas] [<ffffffffc005ef26>] megasas_probe_one.part.33+0x636/0x1100 [megaraid_sas] [<ffffffffc005fa36>] megasas_probe_one+0x46/0xc0 [megaraid_sas] [<ffffffff813d2ca5>] local_pci_probe+0x45/0xa0 [<ffffffff813d4222>] pci_device_probe+0x192/0x1b0 [<ffffffff814e3658>] driver_probe_device+0x2a8/0x460 [<ffffffff814e38ed>] __driver_attach+0xdd/0xe0 [<ffffffff814e124c>] bus_for_each_dev+0x6c/0xc0 [<ffffffff814e2dde>] driver_attach+0x1e/0x20 [<ffffffff814e2775>] bus_add_driver+0x45/0x270 [<ffffffff814e4400>] driver_register+0x60/0xe0 Signed-off-by: Shu Wang <shuwang@redhat.com> Acked-by: Sumit Saxena <sumit.saxena@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-07-24scsi: qedi: Add ISCSI_BOOT_SYSFS to KconfigNilesh Javali
qedi uses iscsi_boot_sysfs to export the targets used for boot to sysfs. Select the config option to make sure the module is built. This addresses the compile time issue, drivers/scsi/qedi/qedi_main.o: In function `qedi_remove': qedi_main.c:(.text+0x3bbd): undefined reference to `iscsi_boot_destroy_kset' drivers/scsi/qedi/qedi_main.o: In function `__qedi_probe.constprop.0': qedi_main.c:(.text+0x577a): undefined reference to `iscsi_boot_create_target' qedi_main.c:(.text+0x5807): undefined reference to `iscsi_boot_create_target' qedi_main.c:(.text+0x587f): undefined reference to `iscsi_boot_create_initiator' qedi_main.c:(.text+0x58f3): undefined reference to `iscsi_boot_create_ethernet' qedi_main.c:(.text+0x5927): undefined reference to `iscsi_boot_destroy_kset' qedi_main.c:(.text+0x5d7b): undefined reference to `iscsi_boot_create_host_kset' [mkp: fixed whitespace] Signed-off-by: Nilesh Javali <nilesh.javali@cavium.com> Fixes: c57ec8fb7c02 ("scsi: qedi: Add support for Boot from SAN over iSCSI offload") Reported-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-07-24ftgmac100: Make the MDIO bus a child of the ethernet deviceBenjamin Herrenschmidt
Populate mii_bus->parent with our own platform device before registering, which makes it easier to locate the MDIO bus in sysfs when trying to diagnose problems. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Joel Stanley <joel@jms.id.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-24ftgmac100: Increase reset timeoutBenjamin Herrenschmidt
We had reports of 50us not being sufficient to reset the MAC, thus hitting the "Hardware reset failed" error bringing the interface up on some AST2400 based machines. This bumps the timeout to 200us. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-24mcs7780: Fix initialization when CONFIG_VMAP_STACK is enabledThomas Jarosch
DMA transfers are not allowed to buffers that are on the stack. Therefore allocate a buffer to store the result of usb_control_message(). Fixes these bugreports: https://bugzilla.kernel.org/show_bug.cgi?id=195217 https://bugzilla.redhat.com/show_bug.cgi?id=1421387 https://bugzilla.redhat.com/show_bug.cgi?id=1427398 Shortened kernel backtrace from 4.11.9-200.fc25.x86_64: kernel: ------------[ cut here ]------------ kernel: WARNING: CPU: 3 PID: 2957 at drivers/usb/core/hcd.c:1587 kernel: transfer buffer not dma capable kernel: Call Trace: kernel: dump_stack+0x63/0x86 kernel: __warn+0xcb/0xf0 kernel: warn_slowpath_fmt+0x5a/0x80 kernel: usb_hcd_map_urb_for_dma+0x37f/0x570 kernel: ? try_to_del_timer_sync+0x53/0x80 kernel: usb_hcd_submit_urb+0x34e/0xb90 kernel: ? schedule_timeout+0x17e/0x300 kernel: ? del_timer_sync+0x50/0x50 kernel: ? __slab_free+0xa9/0x300 kernel: usb_submit_urb+0x2f4/0x560 kernel: ? urb_destroy+0x24/0x30 kernel: usb_start_wait_urb+0x6e/0x170 kernel: usb_control_msg+0xdc/0x120 kernel: mcs_get_reg+0x36/0x40 [mcs7780] kernel: mcs_net_open+0xb5/0x5c0 [mcs7780] ... Regression goes back to 4.9, so it's a good candidate for -stable. Though it's the decision of the maintainer. Thanks to Dan Williams for adding the "transfer buffer not dma capable" warning in the first place. It instantly pointed me in the right direction. Patch has been tested with transferring data from a Polar watch. Signed-off-by: Thomas Jarosch <thomas.jarosch@intra2net.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-24net: stmmac: Adjust dump offset of DMA registers for ethtoolThor Thayer
The commit fbf68229ffe7 ("net: stmmac: unify registers dumps methods") in the Linux kernel modified the register dump to store the DMA registers at the DMA register offset (0x1000) but ethtool (stmmac.c) looks for the DMA registers after the MAC registers which is offset 55. This patch copies the DMA registers from the higher offset to the offset where ethtool expects them. Signed-off-by: Thor Thayer <thor.thayer@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-24Merge tag 'wireless-drivers-for-davem-2017-07-21' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers Kalle Valo says: ==================== wireless-drivers fixes for 4.13 Important, but small in size, fixes. brcmfmac * fix a regression in SDIO support introduced in v4.13-rc1 rtlwifi * fix a regression in bluetooth coexistance introduced in v4.13-rc1 iwlwifi * a few NULL pointer dereferences in the recovery flow * a small but important fix for IBSS * a one-liner fix for tracing, which was including too much data ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-24mlxsw: spectrum_router: Don't offload routes next in listIdo Schimmel
Each FIB node holds a linked list of routes sharing the same prefix and length. In the case of IPv4 it's ordered according to table ID, metric and TOS and only the first route in the list is actually programmed to the device. In case a gatewayed route is added somewhere in the list, then after its nexthop group will be refreshed and become valid (due to the resolution of its gateway), it'll mistakenly overwrite the existing entry. Example: 192.168.200.0/24 dev enp3s0np3 scope link metric 1000 offload 192.168.200.0/24 via 192.168.100.1 dev enp3s0np3 metric 1000 offload Both routes are marked as offloaded despite the fact only the first one should actually be present in the device's table. When refreshing the nexthop group, don't write the route to the device's table unless it's the first in its node. Fixes: 9aecce1c7d97 ("mlxsw: spectrum_router: Correctly handle identical routes") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-24net: ethernet: mediatek: Explicitly include linux/interrupt.hMark Brown
The mediatek ethernet driver uses interrupts but does not explicitly include linux/interrupt.h, relying on implicit includes. Fix this so we don't get build breaks as happened for ARM in next-20170720. Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-24tun/tap: Add the missed return value check of register_netdevice_notifierTonghao Zhang
There is some codes of tun/tap module which did not check the return value of register_netdevice_notifier. Add the check now. Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-24net: ethernet: mediatek: avoid potential invalid memory accessSean Wang
Potential dangerous invalid memory might be accessed if invalid mac value reflected from the forward port field in rxd4 caused by possible potential hardware defects. So added a simple sanity checker to avoid the kind of situation happening. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Acked-by: John Crispin <john@phrozen.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-24ACPI: NUMA: Fix typo in the full name of SRATRoss Zwisler
To save someone the time of searching the ACPI spec for "Static Resource Affinity Table". Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-07-24thunderbolt: use uuid_t instead of uuid_beChristoph Hellwig
Switch thunderbolt to the new uuid type. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Amir Goldstein <amir73il@gmail.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2017-07-24HID: ortek: add one more buggy deviceBenjamin Tissoires
The iHome keypad also requires the same tweak we are doing for other Ortek devices. Reported-by: Mairin Duffy <duffy@redhat.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2017-07-24md/raid5: add thread_group worker async_tx_issue_pending_allOfer Heifetz
Since thread_group worker and raid5d kthread are not in sync, if worker writes stripe before raid5d then requests will be waiting for issue_pendig. Issue observed when building raid5 with ext4, in some build runs jbd2 would get hung and requests were waiting in the HW engine waiting to be issued. Fix this by adding a call to async_tx_issue_pending_all in the raid5_do_work. Signed-off-by: Ofer Heifetz <oferh@marvell.com> Cc: stable@vger.kernel.org Signed-off-by: Shaohua Li <shli@fb.com>
2017-07-24xen-blkfront: Fix handling of non-supported operationsBart Van Assche
This patch fixes the following sparse warnings: drivers/block/xen-blkfront.c:916:45: warning: incorrect type in argument 2 (different base types) drivers/block/xen-blkfront.c:916:45: expected restricted blk_status_t [usertype] error drivers/block/xen-blkfront.c:916:45: got int [signed] error drivers/block/xen-blkfront.c:1599:47: warning: incorrect type in assignment (different base types) drivers/block/xen-blkfront.c:1599:47: expected int [signed] error drivers/block/xen-blkfront.c:1599:47: got restricted blk_status_t [usertype] <noident> drivers/block/xen-blkfront.c:1607:55: warning: incorrect type in assignment (different base types) drivers/block/xen-blkfront.c:1607:55: expected int [signed] error drivers/block/xen-blkfront.c:1607:55: got restricted blk_status_t [usertype] <noident> drivers/block/xen-blkfront.c:1625:55: warning: incorrect type in assignment (different base types) drivers/block/xen-blkfront.c:1625:55: expected int [signed] error drivers/block/xen-blkfront.c:1625:55: got restricted blk_status_t [usertype] <noident> drivers/block/xen-blkfront.c:1628:62: warning: restricted blk_status_t degrades to integer Compile-tested only. Fixes: commit 2a842acab109 ("block: introduce new block status code type") Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Roger Pau Monné <roger.pau@citrix.com> Cc: <xen-devel@lists.xenproject.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-07-24clk: sunxi-ng: sun5i: Add clk_set_rate_parent to the CPU clockMaxime Ripard
The current CPU clock is missing the option to change the rate of its parents, leading to improper rates calculated by cpufreq, and eventually crashes. Cc: <stable@vger.kernel.org> Fixes: 5e73761786d6 ("clk: sunxi-ng: Add sun5i CCU driver") Reported-by: Kevin Hilman <khilman@baylibre.com> Acked-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-07-24vfio: ccw: fix bad ptr math for TIC cda translationJason J. Herne
When we are translating channel data addresses from guest to host address space for TIC instructions we are getting incorrect addresses because of a pointer arithmetic error. We currently calculate the offset of the TIC's cda from the start of the channel program chain (ccw->cda - ccw_head). We then add that to the address of the ccw chain in host memory (iter->ch_ccw). The problem is that iter->ch_ccw is a pointer to struct ccw1 so when we increment it we are actually incrementing by the size of struct ccw1 which is 8 bytes. The intent was to increment by n-bytes, not n*8. The fix: cast iter->ch_ccw to char* so it will be incremented by n*1. Reviewed-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com> Signed-off-by: Jason J. Herne <jjherne@linux.vnet.ibm.com> Signed-off-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com> Message-Id: <20170721011436.76112-1-bjsdjshi@linux.vnet.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-07-24Merge branch 'drm-vmwgfx-fixes' of ↵Dave Airlie
git://people.freedesktop.org/~syeh/repos_linux into drm-fixes misc vmwgfx fixes. * 'drm-vmwgfx-fixes' of git://people.freedesktop.org/~syeh/repos_linux: drm/vmwgfx: constify pci_device_id. drm/vmwgfx: Fix gcc-7.1.1 warning drm/vmwgfx: Fix cursor hotspot issue with Wayland on Fedora drm/vmwgfx: Limit max desktop dimensions to 8Kx8K drm/vmwgfx: dma-buf: Constify ttm_place structures. drm/vmwgfx: fix comment mistake for vmw_cmd_dx_set_index_buffer() drm/vmwgfx: Use dma_pool_zalloc drm/vmwgfx: Fix handling of errors returned by 'vmw_cotable_alloc()' drm/vmwgfx: Fix NULL pointer comparison
2017-07-24Merge branch 'linux-4.13' of git://github.com/skeggsb/linux into drm-fixesDave Airlie
nouveau regression fixes. * 'linux-4.13' of git://github.com/skeggsb/linux: drm/nouveau/kms: remove call to drm_crtc_vblank_off() during unload/suspend drm/nouveau/kms/nv50: update vblank state in response to modeset actions drm/nouveau/disp: add tv encoders to output resource mapping drm/nouveau/i2c/gf119-: add support for address-only transactions
2017-07-23Merge tag 'iio-fixes-for-4.13a' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-linus Jonathan writes: First set of IIO fixes for the 4.13 cycle. * ad2s1210 - Fix negative angular velocity reads (identified by a gcc 7 warning) * aspeed-adc - Wait for initialization sequence to finish before enabling channels. Without it no channels work. * axp288 - Revert a patch that dropped some bogus register mods. No one is entirely sure why but it breaks charging on some devices. - Fix GPADC pin read returning 0. Turns out a small sleep is needed. * bmc150 - Make sure device is restored to normal state after suspend / resume cycle. Otherwise, simple sysfs reads are broken. * tsl2563 - fix wrong event code. * st-accel - add spi 3-wire support. Needed to fix the lsm303agr accelerometer which only had 3 wires in all cases. Side effect is to enable optional 3-wire support for other devices. * st-pressure - disable multiread by default for LPS22HB (only effects SPI) * sun4i-gpadc-iio - fix unbalanced irq enable / disable * vf610 - Fix VALT slection for REFSEL bits - ensures we are using the right reference pins.
2017-07-24drm/nouveau/kms: remove call to drm_crtc_vblank_off() during unload/suspendBen Skeggs
These on()/off() calls should be done as a result of modesetting actions, and as we shut down all heads already on unload/suspend, it's pointless to call off() again. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2017-07-24drm/nouveau/kms/nv50: update vblank state in response to modeset actionsBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2017-07-24drm/nouveau/disp: add tv encoders to output resource mappingBen Skeggs
We don't support them on G80, but we need to add them to the mapping to avoid triggering a WARN_ON() on GPUs where the ports are present. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2017-07-24drm/nouveau/i2c/gf119-: add support for address-only transactionsBen Skeggs
Since switching the I2C-over-AUX helpers, there have been regressions on some display combinations due to us not having support for "address only" transactions. This commits enables support for them for GF119 and newer. Earlier GPUs have been reverted to a custom I2C-over-AUX algorithm. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2017-07-24drm/rockchip: fix Kconfig dependenciesArnd Bergmann
A bug that I had fixed earlier just came back, with CONFIG_EXTCON=m, the rockchip drm driver will fail to link: drivers/gpu/drm/rockchip/cdn-dp-core.o: In function `cdn_dp_get_port_lanes': cdn-dp-core.c:(.text.cdn_dp_get_port_lanes+0x30): undefined reference to `extcon_get_state' cdn-dp-core.c:(.text.cdn_dp_get_port_lanes+0x6c): undefined reference to `extcon_get_property' drivers/gpu/drm/rockchip/cdn-dp-core.o: In function `cdn_dp_check_sink_connection': cdn-dp-core.c:(.text.cdn_dp_check_sink_connection+0x80): undefined reference to `extcon_get_state' drivers/gpu/drm/rockchip/cdn-dp-core.o: In function `cdn_dp_enable': cdn-dp-core.c:(.text.cdn_dp_enable+0x748): undefined reference to `extcon_get_property' The problem is that that the sub-drivers are now all linked into the main rockchip drm module, which breaks all the Kconfig dependencies that are specified in the options for those sub-drivers. This clarifies the dependency to ensure that we can only turn on the DP driver when EXTCON is reachable. As the 'select' statements can now cause additional options to become built-in when they should be loadable modules, I'm moving those into the main driver config option. The dependency on DRM_ROCKCHIP can be reduced into a single 'if' statement here for brevity, but this has no functional effect. Fixes: b6705157b2db ("drm/rockchip: add extcon dependency for DP") Fixes: 8820b68bd378 ("drm/rockchip: Refactor the component match logic.") Link: https://patchwork.kernel.org/patch/9648761/ Acked-by: Guenter Roeck <groeck@chromium.org> Tested-by: Jeffy Chen <jeffy.chen@rock-chips.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Mark Yao <mark.yao@rock-chips.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170721211214.3386387-1-arnd@arndb.de
2017-07-23parisc: pdc_stable: constify attribute_group structures.Arvind Yadav
attribute_groups are not supposed to change at runtime. All functions working with attribute_groups provided by <linux/sysfs.h> work with const attribute_group. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Helge Deller <deller@gmx.de>
2017-07-23iio: aspeed-adc: wait for initial sequence.Mykola Kostenok
This patch enables adc engine at initialization time and waits for the initial sequence completion before enabling adc channels. Without this code adc channels are not functional and shows zeros for all connected channels. Tested on mellanox msn platform. v1 -> v2: Pointed by Rick Altherr: - Wait init sequence code enabled by bool from OF match table. Signed-off-by: Mykola Kostenok <c_mykolak@mellanox.com> Reviewed-by: Rick Altherr <raltherr@google.com> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2017-07-23IB/ipoib: Notify on modify QP failure only when relevantErez Shitrit
Modify QP can fail and it can be acceptable, like when moving from RST to ERR state, all the rest are not acceptable and a message to the log should be printed. The current code prints on all failures and many messages like: "Failed to modify QP to ERROR state" appear, even when supported by the state machine of the QP object. Signed-off-by: Erez Shitrit <erezsh@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org>
2017-07-23Revert "IB/core: Allow QP state transition from reset to error"Leon Romanovsky
The commit ebc9ca43e1d5 ("IB/core: Allow QP state transition from reset to error") allowed transition from Reset to Error state for the QPs. This behavior doesn't follow the IBTA specification 1.3, which in 10.3.1 QUEUE PAIR AND EE CONTEXT STATES section. The quote from the spec: "An error can be forced from any state, except Reset, with the Modify QP/EE Verb." Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
2017-07-23IB/ipoib: Remove double pointer assigningLeon Romanovsky
There is no need to assign "p" pointer twice. This patch fixes the following smatch warning: drivers/infiniband/ulp/ipoib/ipoib_cm.c:517 ipoib_cm_rx_handler() warn: missing break? reassigning 'p->id' Fixes: 839fcaba355a ("IPoIB: Connected mode experimental support") Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
2017-07-23IB/ipoib: Clean error paths in add portLeon Romanovsky
Refactor error paths in ipoib_add_port() function. The code flow ensures that the function terminates on every error flow and it makes redundant all "else" cases. The functions are called during the flow are returning "result < 0", in case of error, so there is no need to check it explicitly. Fixes: 58e9cc90cda7 ("IB/IPoIB: Fix bad error flow in ipoib_add_port()") Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
2017-07-23IB/ipoib: Add get statistics support to SRIOV VFFeras Daoud
Add SRIOV VF support to get traffic statistics. Signed-off-by: Feras Daoud <ferasda@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org>
2017-07-23IB/ipoib: Add multicast packets statisticsAlex Vesker
Update the multicast counter when multicast packets are received and provide this information through ethtool support. Signed-off-by: Alex Vesker <valex@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org>
2017-07-23IB/ipoib: Set IPOIB_NEIGH_TBL_FLUSH after flushed completion initializationFeras Daoud
Set IPOIB_NEIGH_TBL_FLUSH bit after initializing the neighbor flushed completion, otherwise the garbage collector may signal a completion while it is not initialized yet. Fixes: b63b70d87741 ("IPoIB: Use a private hash table for path lookup in xmit path") Signed-off-by: Feras Daoud <ferasda@mellanox.com> Signed-off-by: Alex Vesker <valex@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org>
2017-07-23IB/ipoib: Prevent setting negative values to max_nonsrq_conn_qpAlex Vesker
Don't allow negative values to max_nonsrq_conn_qp. There is no functional impact on a negative value but it is logicically incorrect. Fixes: 68e995a29572 ("IPoIB/cm: Add connected mode support for devices without SRQs") Signed-off-by: Alex Vesker <valex@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org>
2017-07-23IB/ipoib: Make sure no in-flight joins while leaving that mcastErez Shitrit
While cleaning neighs and there is a send-only mcast neigh, the driver should wait to finish its join process before trying to remove it. Without this patch, we will see messages like: "ipoib_mcast_leave on an in-flight join" and unexpected results in the join_complete. Signed-off-by: Erez Shitrit <erezsh@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org>
2017-07-23IB/ipoib: Use cancel_delayed_work_sync when neededErez Shitrit
The work mcast_task can re-queue itself, so instead of doing cancel && flush_workqueue, that still can leave a queued task on the air, use cancel_delayed_work_sync. Also, no need to use lock over the cancel, the original lock was due to bit assignment setting (IPOIB_MCAST_RUN) that is not in use anymore. Signed-off-by: Erez Shitrit <erezsh@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org>
2017-07-23IB/ipoib: Fix race between light events and interface restartFeras Daoud
A potential race between light_event and interface restart may attach multicast group to an already attached QP. Scenario: light_event flow goes through ipoib_mcast_dev_flush function, if a context switch occurs before calling ipoib_mcast_remove_list, then we may face a situation where the broadcast of the priv is null and the corresponding QP is not detached yet. If an "interface restart" runs during the previous context switch, the following scenario occurs: When the device goes up, ipoib_ib_dev_up function will be called, it will send a new registration request to the broadcast group and then attach the group to the QP that was not detached before. IPOIB_FLUSH_LIGHT INTERFACE RESTART __ipoib_ib_dev_flush | | | | | | | ipoib_mcast_dev_flush | Move mcast list and broadcast to remove_list | | | | | Context Switch--> | | ipoib_ib_dev_down | | | | | ipoib_ib_dev_up | | | | | ipoib_mcast_join_task | allocate new broadcast | | | | | Attach QP to multicast group | | | | | <--Context Switch ipoib_mcast_leave Detach QP from multicast group Signed-off-by: Feras Daoud <ferasda@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org>
generated by cgit (git 2.34.1) at 2025-09-29 02:47:57 +0000