summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2024-08-27wifi: iwlwifi: mvm: add API for EML OMN frame failureEmmanuel Grumbach
When the firmware fails to send EML OMN frames, it notifies the host and the host need to take proper action. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20240808232017.0c6bc216ef8c.Ida85d2062734a569e1af35f47d14cc5bb4bf893e@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-08-27wifi: iwlwifi: mvm: exit EMLSR if both links are missing beaconsEmmanuel Grumbach
If both links are missing 5 beacons, we need to exit EMLSR, if only one link misses beacons, we need to wait until 11 beacons are missed. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20240808232017.b7785943a4fe.I70a459c5e7db85f398d5795ba83bb15f65d6bf9d@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-08-27wifi: iwlwifi: mvm: handle the new missed beacons notificationEmmanuel Grumbach
Use the same handler for both types and just convert the old version to the new. Drop the unused fields from the old one and fake the new fields. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20240808232017.a64ffc998569.I7d181052b1a69c331d07263f20c1e00cbc0bc891@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-08-27wifi: iwlwifi: mvm: add the new API for the missed beacons notificationEmmanuel Grumbach
Note that the new API does not have the same notification ID as the previous notification: the new notification belongs to the group 0x3. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20240808232017.4ea52360b32e.Ibc25dcabd8aeadda906549482a6c77bc42fb55bb@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-08-27wifi: iwlwifi: mvm: rename iwl_missed_beacons_notifEmmanuel Grumbach
A new version is coming up. Rename the current struct to include the current version. s/iwl_missed_beacons_notif/iwl_missed_beacons_notif_v4 Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20240808232017.b5c3a83a05ef.I698611582b5ca8395f42a535c51f7230307e2c6f@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-08-27wifi: iwlwifi: mvm: Offload RLC/SMPS functionality to firmwareDaniel Gabay
Currently, the driver handles SMPS decisions by tracking AP capabilities, BT coexistence changes, sending necessary SMPS frames to the AP, and updating firmware with RX chain info using the RLC_CONFIG_CMD. Starting with version 3 of the RLC_CONFIG_CMD, the firmware takes over this responsibility. It now tracks SMPS, sends frames, and configures the RLC. In this patch: 1. Stop sending RLC_CONFIG_CMD when firmware supports RLC offload (version 3), as rlc.rx_chain_info is not needed by firmware, and no other field in the cmd is used. 2. Prevent the driver from forwarding any SMPS requests to mac80211, i.e., the driver should not transmit SMPS frames to the AP as firmware handles that. 3. Set NL80211_FEATURE_DYNAMIC_SMPS and NL80211_FEATURE_STATIC_SMPS conditionally based on RLC version. Signed-off-by: Daniel Gabay <daniel.gabay@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20240808232017.45da23be1f65.I0d46db82dd990a82e8a66876fe2f5310bc9513be@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-08-27staging: rtl8192e: Constify struct lib80211_crypto_opsChristophe JAILLET
Now that functions in lib80211 handle "const struct lib80211_crypto_ops", some structure can be constified as well. Constifying these structures moves some data to a read-only section, so increase overall security. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://patch.msgid.link/dfda6343781ae3d50cd2ec7bbdcf76a489b6922a.1722839425.git.christophe.jaillet@wanadoo.fr Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-08-27wifi: lib80211: Handle const struct lib80211_crypto_ops in lib80211Christophe JAILLET
lib80211_register_crypto_ops() and lib80211_unregister_crypto_ops() don't modify their "struct lib80211_crypto_ops *ops" argument. So, it can be declared as const. Doing so, some adjustments are needed to also constify some date in "struct lib80211_crypt_data", "struct lib80211_crypto_alg" and the return value of lib80211_get_crypto_ops(). Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/c74085e02f33a11327582b19c9f51c3236e85ae2.1722839425.git.christophe.jaillet@wanadoo.fr Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-08-27virt: sev-guest: Replace dev_dbg() with pr_debug()Nikunj A Dadhania
In preparation for moving code to arch/x86/coco/sev/core.c, replace dev_dbg with pr_debug. No functional change. Signed-off-by: Nikunj A Dadhania <nikunj@amd.com> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com> Reviewed-by: Borislav Petkov (AMD) <bp@alien8.de> Tested-by: Peter Gonda <pgonda@google.com> Link: https://lore.kernel.org/r/20240731150811.156771-2-nikunj@amd.com
2024-08-27wifi: iwlwifi: mvm: add and improve EMLSR debug infoMiri Korenblit
Add prints of the per-link MPDU counters, and change the other MPDU counters related prints to use DL_INFO, which is already used for all EMLSR tests anyway, instead of DL_STATS which pollutes the logs with all the RX signal info. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Reviewed-by: Daniel Gabay <daniel.gabay@intel.com> Link: https://patch.msgid.link/20240729201718.02bd85837c87.I85480c9c4fab0f7a574dd69cbeafd82674146921@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-08-27wifi: iwlwifi: Enable channel puncturing for US/CAN from biosSomashekhar(Som)
Add support for enabling channel puncturing for US/CAN based on BIOS configuration through UEFI Signed-off-by: Somashekhar(Som) <somashekhar.puttagangaiah@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20240729201718.828f3ecf5118.I5561ab8c7cd48ad4e5d6daf21b037bf88c619a4a@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-08-27wifi: iwlwifi: mvm: add firmware debug points for EMLSR entry / exitEmmanuel Grumbach
This will help to dump the firmware logs at the right spot if needed. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20240729201718.3a91e89e32f8.Ieb28d7756c47dee52c912a71abe82fa0b08b19da@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-08-27wifi: iwlwiif: mvm: handle the new BT notifEmmanuel Grumbach
Iterate all the links and check if any action must be taken. The new notification impacts only the esr decision. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20240729201718.00cfc07879c6.I8491483fda3b5888ea6ffa10fbd17807e443f943@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-08-27wifi: iwlwifi: mvm: start to support the new BT profile notificationEmmanuel Grumbach
We have a new notification the BT profile. It contains almost nothing, only the wifi loss information. Copy this into mvm. We still need to iterate over the vifs / links to use this data. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20240729201718.637499f3a85a.I8bf654cf5d8aa038100273876c936845ecc338f7@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-08-27wifi: iwlwifi: mvm: s/iwl_bt_coex_profile_notif/iwl_bt_coex_prof_old_notifEmmanuel Grumbach
The iwl_bt_coex_profile_notif is now being obsoleted. It'll be replaced by a new notification coming with a non-legacy group. Rename it to avoid confusion. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20240729201718.dc29fd0d7817.I5881fce86ec8b76ae98d2948265434b8e7d860c1@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-08-27wifi: iwlwifi: mvm: increase the time between ranging measurementsAvraham Stern
The algo running in fw may take a little longer than 5 milliseconds, (e.g. measurement on 80MHz while associated). Increase the minimum time between measurements to 7 milliseconds. Fixes: 830aa3e7d1ca ("iwlwifi: mvm: add support for range request command version 13") Signed-off-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20240729201718.d3f3c26e00d9.I09e951290e8a3d73f147b88166fd9a678d1d69ed@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-08-27wifi: iwlwifi: mvm: set the cipher for secured NDP rangingAvraham Stern
The cipher pointer is not set, but is derefereced trying to set its content, which leads to a NULL pointer dereference. Fix it by pointing to the cipher parameter before dereferencing. Fixes: 626be4bf99f6 ("wifi: iwlwifi: mvm: modify iwl_mvm_ftm_set_secured_ranging() parameters") Signed-off-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20240729201718.24e83369f136.I80501ddcb82920561f450d00020d860e7a3f90c6@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-08-27wifi: iwlwifi: mvm: Fix a race in scan abort flowIlan Peer
When the upper layer requests to cancel an ongoing scan, a race is possible in which by the time the driver starts to handle the upper layers scan cancel flow, the FW already completed handling the scan request and the driver received the scan complete notification but still did not handle the notification. In such a case the FW will simply ignore the scan abort request coming from the driver, no notification would arrive from the FW and the entire abort flow would be considered a failure. To better handle this, check the status code returned by the FW for the scan abort command. In case the status indicates that no scan was aborted, complete the scan abort flow with success, i.e., the scan was aborted, as the flow is expected to consume the scan complete notification. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20240825085558.483989d3baef.I3340556a222388504c6330b333360bf77d10f9e2@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-08-27wifi: iwlwifi: mvm: set ul_mu_data_disable when neededEmmanuel Grumbach
The firmware needs to know what we had in the HE CAP, propagate that setting to the firmware through the LINK command. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20240729201718.fef270d2995b.I328237837df30e1cb98764987eaaf8e8993e058c@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-08-27wifi: iwlwifi: mei: add support for SAP version 4Avraham Stern
SAP version 4 uses larger Host to MEI notification queue. Since it is unknown which SAP version is used by the CSME firmware when the driver loads, try version 4 first. In case the CSME firmware uses version 3, the memory allocation will fail. In this case the driver will try again to allocate the memory for version 3. Signed-off-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20240729201718.8372e040282f.Ia0085784e08a35159c9293f986c3d2774038f4c4@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-08-27wifi: iwlwifi: config: label 'gl' devices as discreteJohannes Berg
The 'gl' devices are in the bz family, but they're not, integrated, so should have their own trans config struct. Fix that, also necessitating the removal of LTR config, and while at it remove 0x2727 and 0x272D IDs that were only used for test chips. Fixes: c30a2a64788b ("wifi: iwlwifi: add a new PCI device ID for BZ device")ticket=none Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20240729201718.95aed0620080.Ib9129512c95aa57acc9876bdff8b99dd41e1562c@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-08-27wifi: iwlwifi: pcie: print function scratch before writingJohannes Berg
We may want to know the value of this register for certain debug scenarios before we overwrite it, it indicates which parts of the chip have recently been reset. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20240729201718.737e5f8bb8df.Ia3f3637ac4a0fb4b35ffd652f92eb75de652ee12@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-08-27wifi: iwlwifi: mvm: use correct key iterationJohannes Berg
In the cases changed here, key iteration isn't done from an RCU critical section, but rather using the wiphy lock as protection. Therefore, just use ieee80211_iter_keys(). The link switch case can therefore also use sync commands. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20240729201718.69a2d18580c1.I2148e04d4b467d0b100beac8f7e449bfaaf775a5@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-08-27wifi: iwlwifi: remove MVM prefix from FW macrosMiri Korenblit
These are not mvm specific. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Link: https://patch.msgid.link/20240729201718.939b32f84f46.I293957bf172680871eba24448d9d1870e49100b6@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-08-27wifi: iwlwifi: mvm: add support for new REDUCE_TXPOWER_CMD versionsEmmanuel Grumbach
New API versions are coming up for this command. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20240729201718.7ec1527be98c.I52dede6532bc61041c441caee5273734f14a1d78@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-08-27wifi: iwlwifi: mvm: prepare the introduction of V9 of REDUCED_TX_POWEREmmanuel Grumbach
* Rename iwl_dev_tx_power_cmd to iwl_dev_tx_power_cmd_v3_v8 * struct iwl_dev_tx_power_common needs to be packed. It was always the case, but now that its size is not a multiple of 4, it becomes meaningful. * Move per_band data out of the common structure since it won't be present in the new versions of the command. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20240729201718.8da29a66984f.I922bdef4740d990f98cb452e858c4157bbc491c5@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-08-27wifi: mac80211_hwsim: correct MODULE_PARM_DESC of multi_radioZong-Zhe Yang
Correct the name field in multi_radio's MODULE_PARM_DESC. Fixes: d2601e34a102 ("wifi: mac80211_hwsim: add support for multi-radio wiphy") Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com> Acked-by: Felix Fietkau <nbd@nbd.name> Link: https://patch.msgid.link/20240712074938.26437-1-kevin_yang@realtek.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-08-27wifi: iwlwifi: clear trans->state earlier upon errorEmmanuel Grumbach
When the firmware crashes, we first told the op_mode and only then, changed the transport's state. This is a problem if the op_mode's nic_error() handler needs to send a host command: it'll see that the transport's state still reflects that the firmware is alive. Today, this has no consequences since we set the STATUS_FW_ERROR bit and that will prevent sending host commands. iwl_fw_dbg_stop_restart_recording looks at this bit to know not to send a host command for example. To fix the hibernation, we needed to reset the firmware without having an error and checking STATUS_FW_ERROR to see whether the firmware is alive will no longer hold, so this change is necessary as well. Change the flow a bit. Change trans->state before calling the op_mode's nic_error() method and check trans->state instead of STATUS_FW_ERROR. This will keep the current behavior of iwl_fw_dbg_stop_restart_recording upon firmware error, and it'll allow us to call iwl_fw_dbg_stop_restart_recording safely even if STATUS_FW_ERROR is clear, but yet, the firmware is not alive. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20240825191257.9d7427fbdfd7.Ia056ca57029a382c921d6f7b6a6b28fc480f2f22@changeid [I missed this was a dependency for the hibernation fix, changed the commit message a bit accordingly] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-08-27wifi: wfx: repair open network AP modeAlexander Sverdlin
RSN IE missing in beacon is normal in open networks. Avoid returning -EINVAL in this case. Steps to reproduce: $ cat /etc/wpa_supplicant.conf network={ ssid="testNet" mode=2 key_mgmt=NONE } $ wpa_supplicant -iwlan0 -c /etc/wpa_supplicant.conf nl80211: Beacon set failed: -22 (Invalid argument) Failed to set beacon parameters Interface initialization failed wlan0: interface state UNINITIALIZED->DISABLED wlan0: AP-DISABLED wlan0: Unable to setup interface. Failed to initialize AP interface After the change: $ wpa_supplicant -iwlan0 -c /etc/wpa_supplicant.conf Successfully initialized wpa_supplicant wlan0: interface state UNINITIALIZED->ENABLED wlan0: AP-ENABLED Cc: stable@vger.kernel.org Fixes: fe0a7776d4d1 ("wifi: wfx: fix possible NULL pointer dereference in wfx_set_mfp_ap()") Signed-off-by: Alexander Sverdlin <alexander.sverdlin@siemens.com> Reviewed-by: Jérôme Pouiller <jerome.pouiller@silabs.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://patch.msgid.link/20240823131521.3309073-1-alexander.sverdlin@siemens.com
2024-08-27USB: serial: option: add MeiG Smart SRM825LZHANG Yuntian
Add support for MeiG Smart SRM825L which is based on Qualcomm 315 chip. T: Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=5000 MxCh= 0 D: Ver= 3.20 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs= 1 P: Vendor=2dee ProdID=4d22 Rev= 4.14 S: Manufacturer=MEIG S: Product=LTE-A Module S: SerialNumber=6f345e48 C:* #Ifs= 6 Cfg#= 1 Atr=80 MxPwr=896mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) E: Ad=05(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=88(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan E: Ad=89(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=8e(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=0f(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms Signed-off-by: ZHANG Yuntian <yt@radxa.com> Link: https://lore.kernel.org/0041DFA5200EFB1B+20240803074619.563116-1-yt@radxa.com/ Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org>
2024-08-26hwmon: (pt5161l) Fix invalid temperature readingCosmo Chou
The temperature reading function was using a signed long for the ADC code, which could lead to mishandling of invalid codes on 32-bit platforms. This allowed out-of-range ADC codes to be incorrectly interpreted as valid values and used in temperature calculations. Change adc_code to u32 to ensure that invalid ADC codes are correctly identified on all platforms. Fixes: 1b2ca93cd059 ("hwmon: Add driver for Astera Labs PT5161L retimer") Signed-off-by: Cosmo Chou <chou.cosmo@gmail.com> Message-ID: <20240819104630.2375441-1-chou.cosmo@gmail.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2024-08-27wifi: rtw89: introduce chip support link number and driver MLO capabilityZong-Zhe Yang
Configure supported link number by chip. And, introduce driver capability flag for MLO. Driver should depend on runtime FW features and chip info to determine whether to set the MLO capability flag or not. Once the MLO flag is set, driver will consider/register/initialize things for MLO usages. However, we just add the driver MLO capability flag ahead and don't really set it. Then, we can start to tweak driver architecture for MLO. Some code should depend on this flag. And after tweaking driver architecture is done, we will set it based on runtime conditions as mentioned above. Besides, MLD number supported by HW should be chip supported mac_id number / chip supported link number Without driver MLO capability flag, we allocate stations based on supported mac_id number. With driver MLO capability flag, we allocate stations based on supported MLD number. Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20240819091724.33730-9-pkshih@realtek.com
2024-08-27wifi: rtw89: rename roc_entity_idx to roc_chanctx_idxZong-Zhe Yang
The target enum has been renamed to rtw89_"chanctx"_idx. So for readability, rename roc_entity_idx to roc_"chanctx"_idx to align. No logic is changed. Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20240819091724.33730-8-pkshih@realtek.com
2024-08-27wifi: rtw89: 8922a: use right chanctx whenever possible in RFK flowZong-Zhe Yang
No longer access chan with hard-code RTW89_CHANCTX_X whenever possible. Instead, obtain the right chanctx from somewhere and use it in RTL8922A RFK (RF calibration) related code. Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20240819091724.33730-7-pkshih@realtek.com
2024-08-27wifi: rtw89: 8852c: use right chanctx whenever possible in RFK flowZong-Zhe Yang
No longer access chan with hard-code RTW89_CHANCTX_X whenever possible. Instead, obtain the right chanctx from somewhere and use it in RTL8852C RFK (RF calibration) related code. Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20240819091724.33730-6-pkshih@realtek.com
2024-08-27wifi: rtw89: 8852bx: use right chanctx whenever possible in RFK flowZong-Zhe Yang
No longer access chan with hard-code RTW89_CHANCTX_X whenever possible. Instead, obtain the right chanctx from somewhere and use it in RTL8852BX RFK (RF calibration) related code. Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20240819091724.33730-5-pkshih@realtek.com
2024-08-27wifi: rtw89: 8852a: use right chanctx whenever possible in RFK flowZong-Zhe Yang
No longer access chan with hard-code RTW89_CHANCTX_X whenever possible. Instead, obtain the right chanctx from somewhere and use it in RTL8852A RFK (RF calibration) related code. Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20240819091724.33730-4-pkshih@realtek.com
2024-08-27wifi: rtw89: 8851b: use right chanctx whenever possible in RFK flowZong-Zhe Yang
No longer access chan with hard-code RTW89_CHANCTX_X whenever possible. Instead, obtain the right chanctx from somewhere and use it in RTL8851B RFK (RF calibration) related code. Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20240819091724.33730-3-pkshih@realtek.com
2024-08-27wifi: rtw89: pass chan to rfk_band_changed()Zong-Zhe Yang
Originally, all chips have implemented rfk_band_changed() and access chan with hard-code RTW89_CHANCTX_0 in it. But, it's problematic when the chip supports multiple channels. So, change the prototype of rfk_band_changed() and pass chan ahead. And, we will refine the implementation of each chip in the following. Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20240819091724.33730-2-pkshih@realtek.com
2024-08-26ice: add callbacks for Embedded SYNC enablement on dpll pinsArkadiusz Kubalewski
Allow the user to get and set configuration of Embedded SYNC feature on the ice driver dpll pins. Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Link: https://patch.msgid.link/20240822222513.255179-3-arkadiusz.kubalewski@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-26dpll: add Embedded SYNC feature for a pinArkadiusz Kubalewski
Implement and document new pin attributes for providing Embedded SYNC capabilities to the DPLL subsystem users through a netlink pin-get do/dump messages. Allow the user to set Embedded SYNC frequency with pin-set do netlink message. Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Link: https://patch.msgid.link/20240822222513.255179-2-arkadiusz.kubalewski@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-26video/aperture: optionally match the device in sysfb_disable()Alex Deucher
In aperture_remove_conflicting_pci_devices(), we currently only call sysfb_disable() on vga class devices. This leads to the following problem when the pimary device is not VGA compatible: 1. A PCI device with a non-VGA class is the boot display 2. That device is probed first and it is not a VGA device so sysfb_disable() is not called, but the device resources are freed by aperture_detach_platform_device() 3. Non-primary GPU has a VGA class and it ends up calling sysfb_disable() 4. NULL pointer dereference via sysfb_disable() since the resources have already been freed by aperture_detach_platform_device() when it was called by the other device. Fix this by passing a device pointer to sysfb_disable() and checking the device to determine if we should execute it or not. v2: Fix build when CONFIG_SCREEN_INFO is not set v3: Move device check into the mutex Drop primary variable in aperture_remove_conflicting_pci_devices() Drop __init on pci sysfb_pci_dev_is_enabled() Fixes: 5ae3716cfdcd ("video/aperture: Only remove sysfb on the default vga pci device") Cc: Javier Martinez Canillas <javierm@redhat.com> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Helge Deller <deller@gmx.de> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240821191135.829765-1-alexander.deucher@amd.com
2024-08-26nvmet-tcp: fix kernel crash if commands allocation failsMaurizio Lombardi
If the commands allocation fails in nvmet_tcp_alloc_cmds() the kernel crashes in nvmet_tcp_release_queue_work() because of a NULL pointer dereference. nvmet: failed to install queue 0 cntlid 1 ret 6 Unable to handle kernel NULL pointer dereference at virtual address 0000000000000008 Fix the bug by setting queue->nr_cmds to zero in case nvmet_tcp_alloc_cmd() fails. Fixes: 872d26a391da ("nvmet-tcp: add NVMe over TCP target driver") Signed-off-by: Maurizio Lombardi <mlombard@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Keith Busch <kbusch@kernel.org>
2024-08-26net: ti: icssg-prueth: Fix 10M Link issue on AM64xMD Danish Anwar
Crash is seen on AM64x 10M link when connecting / disconnecting multiple times. The fix for this is to enable quirk_10m_link_issue for AM64x. Fixes: b256e13378a9 ("net: ti: icssg-prueth: Add AM64x icssg support") Signed-off-by: MD Danish Anwar <danishanwar@ti.com> Reviewed-by: Roger Quadros <rogerq@kernel.org> Link: https://patch.msgid.link/20240823120412.1262536-1-danishanwar@ti.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-26net: dpaa: reduce number of synchronize_net() callsXi Huang
In the function dpaa_napi_del(), we execute the netif_napi_del() for each cpu, which is actually a high overhead operation because each call to netif_napi_del() contains a synchronize_net(), i.e. an RCU operation. In fact, it is only necessary to call __netif_napi_del and use synchronize_net() once outside of the loop. This change is similar to commit 2543a6000e593a ("gro_cells: reduce number of synchronize_net() calls") and commit 5198d545dba8ad (" net: remove napi_hash_del() from driver-facing API") 5198d545db. Signed-off-by: Xi Huang <xuiagnh@gmail.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20240822072042.42750-1-xuiagnh@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-27ata: libata: Fix memory leak for error path in ata_host_alloc()Zheng Qixing
In ata_host_alloc(), if devres_alloc() fails to allocate the device host resource data pointer, the already allocated ata_host structure is not freed before returning from the function. This results in a potential memory leak. Call kfree(host) before jumping to the error handling path to ensure that the ata_host structure is properly freed if devres_alloc() fails. Fixes: 2623c7a5f279 ("libata: add refcounting to ata_host") Cc: stable@vger.kernel.org Signed-off-by: Zheng Qixing <zhengqixing@huawei.com> Reviewed-by: Yu Kuai <yukuai3@huawei.com> Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
2024-08-26net: pse-pd: tps23881: Support reset-gpiosKyle Swenson
The TPS23880/1 has an active-low reset pin that some boards connect to the SoC to control when the TPS23880 is pulled out of reset. Add support for this via a reset-gpios property in the DTS. Signed-off-by: Kyle Swenson <kyle.swenson@est.tech> Acked-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Kory Maincent <kory.maincent@bootlin.com> Link: https://patch.msgid.link/20240822220100.3030184-3-kyle.swenson@est.tech Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-26ACPI: video: force native for Apple MacbookPro9,2Esther Shimanovich
It used to be that the MacbookPro9,2 used its native intel backlight device until the following commit was introduced: commit b1d36e73cc1c ("drm/i915: Don't register backlight when another backlight should be used (v2)") This commit forced this model to use its firmware acpi_video backlight device instead. That worked fine until an additional commit was added: commit 92714006eb4d ("drm/i915/backlight: Do not bump min brightness to max on enable") That commit uncovered a bug in the MacbookPro 9,2's acpi_video backlight firmware; the backlight does not come back up after resume. Add DMI quirk to select the working native intel interface instead so that the backlight successfully comes back up after resume. Fixes: 92714006eb4d ("drm/i915/backlight: Do not bump min brightness to max on enable") Signed-off-by: Esther Shimanovich <eshimanovich@chromium.org> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Link: https://patch.msgid.link/20240806-acpi-video-quirk-v1-1-369d8f7abc59@chromium.org [ rjw: Subject and changelog edits ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2024-08-26ACPI: battery : Use strscpy() instead of strcpy()Muhammad Qasim Abdul Majeed
Replace strcpy() with strscpy() in the ACPI battery driver. strcpy() has been deprecated because it is generally unsafe, so help to eliminate it from the kernel source. Link: https://github.com/KSPP/linux/issues/88 Signed-off-by: Muhammad Qasim Abdul Majeed <qasim.majeed20@gmail.com> Link: https://patch.msgid.link/20240804123313.16211-4-qasim.majeed20@gmail.com [ rjw: Subject and changelog edits ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2024-08-26ACPI: acpi_processor: Use strscpy instead() of strcpy()Muhammad Qasim Abdul Majeed
Replace strcpy() with strscpy() in the ACPI processor driver. strcpy() has been deprecated because it is generally unsafe, so help to eliminate it from the kernel source. Link: https://github.com/KSPP/linux/issues/88 Signed-off-by: Muhammad Qasim Abdul Majeed <qasim.majeed20@gmail.com> Link: https://patch.msgid.link/20240804123313.16211-3-qasim.majeed20@gmail.com [ rjw: Subject and changelog edits ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
generated by cgit (git 2.34.1) at 2025-09-19 15:09:24 +0000