summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2024-09-10net: stmmac: move stmmac_fpe_cfg to stmmac_priv dataFurong Xu
By moving the fpe_cfg field to the stmmac_priv data, stmmac_fpe_cfg becomes platform-data eventually, instead of a run-time config. Suggested-by: Serge Semin <fancer.lancer@gmail.com> Signed-off-by: Furong Xu <0x1207@gmail.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Serge Semin <fancer.lancer@gmail.com> Link: https://patch.msgid.link/d9b3d7ecb308c5e39778a4c8ae9df288a2754379.1725631883.git.0x1207@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-10net: phy: dp83822: Fix NULL pointer dereference on DP83825 devicesTomas Paukrt
The probe() function is only used for DP83822 and DP83826 PHY, leaving the private data pointer uninitialized for the DP83825 models which causes a NULL pointer dereference in the recently introduced/changed functions dp8382x_config_init() and dp83822_set_wol(). Add the dp8382x_probe() function, so all PHY models will have a valid private data pointer to fix this issue and also prevent similar issues in the future. Fixes: 9ef9ecfa9e9f ("net: phy: dp8382x: keep WOL settings across suspends") Signed-off-by: Tomas Paukrt <tomaspaukrt@email.cz> Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Link: https://patch.msgid.link/66w.ZbGt.65Ljx42yHo5.1csjxu@seznam.cz Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-10drm/amdgpu/atomfirmware: Silence UBSAN warningAlex Deucher
Per the comments, these are variable sized arrays. Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3613 Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 81f7804ba84ee617ed594de934ed87bcc4f83531) Cc: stable@vger.kernel.org
2024-09-10drm/amd/amdgpu: apply command submission parser for JPEG v1David (Ming Qiang) Wu
Similar to jpeg_v2_dec_ring_parse_cs() but it has different register ranges and a few other registers access. Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: David (Ming Qiang) Wu <David.Wu3@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 3d5adbdf1d01708777f2eda375227cbf7a98b9fe) Cc: stable@vger.kernel.org
2024-09-10drm/amd/amdgpu: apply command submission parser for JPEG v2+David (Ming Qiang) Wu
This patch extends the same cs parser from JPEG v4.0.3 to other JPEG versions (v2 and above). Rename to more common name as jpeg_v2_dec_ring_parse_cs() from jpeg_v4_0_3_dec_ring_parse_cs(). Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: David (Ming Qiang) Wu <David.Wu3@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 88dcad2d07c8d82e6a097c8e74239eb67333bcf7) Cc: stable@vger.kernel.org
2024-09-10drm/amd/pm: fix the pp_dpm_pcie issue on smu v14.0.2/3Kenneth Feng
fix the pp_dpm_pcie issue on smu v14.0.2/3 as below: 0: 2.5GT/s, x4 250Mhz 1: 8.0GT/s, x4 616Mhz * 2: 8.0GT/s, x4 1143Mhz * the middle level can be removed since it is always skipped on smu v14.0.2/3 Signed-off-by: Kenneth Feng <kenneth.feng@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit fedf6db3ea9dc5eda0b78cfbbb8f7a88b97e5b24)
2024-09-10drm/amd/pm: update the features set on smu v14.0.2/3Kenneth Feng
update the features set on smu v14.0.2/3 Signed-off-by: Kenneth Feng <kenneth.feng@amd.com> Reviewed-by: Yang Wang <kevinyang.wang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 25d48f2eb0af1f0e6f09f54a1a1716f48c0722c9)
2024-09-10drm/amd/display: Do not reset planes based on crtc zpos_changedLeo Li
[Why] drm_normalize_zpos will set the crtc_state->zpos_changed to 1 if any of it's assigned planes changes zpos, or is removed/added from it. To have amdgpu_dm request a plane reset on this is too broad. For example, if only the cursor plane was moved from one crtc to another, the crtc's zpos_changed will be set to true. But that does not mean that the underlying primary plane requires a reset. [How] Narrow it down so that only the plane that has a change in zpos will require a reset. As a future TODO, we can further optimize this by only requiring a reset on z-order change. Z-order is different from z-pos, since a zpos change doesn't necessarily mean the z-ordering changed, and DC should only require a reset if the z-ordering changed. For example, the following zpos update does not change z-ordering: Plane A: zpos 2 -> 3 Plane B: zpos 1 -> 2 => Plane A is still on top of plane B: no reset needed Whereas this one does change z-ordering: Plane A: zpos 2 -> 1 Plane B: zpos 1 -> 2 => Plane A changed from on top, to below plane B: reset needed Fixes: 38e0c3df6dbd ("drm/amd/display: Move PRIMARY plane zpos higher") Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3569 Signed-off-by: Leo Li <sunpeng.li@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 578aab4ecc73476393389440724b7a391cc0cea9)
2024-09-10drm/amd/display: Avoid race between dcn35_set_drr() and dc_state_destruct()Tobias Jakobi
dc_state_destruct() nulls the resource context of the DC state. The pipe context passed to dcn35_set_drr() is a member of this resource context. If dc_state_destruct() is called parallel to the IRQ processing (which calls dcn35_set_drr() at some point), we can end up using already nulled function callback fields of struct stream_resource. The logic in dcn35_set_drr() already tries to avoid this, by checking tg against NULL. But if the nulling happens exactly after the NULL check and before the next access, then we get a race. Avoid this by copying tg first to a local variable, and then use this variable for all the operations. This should work, as long as nobody frees the resource pool where the timing generators live. Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3142 Fixes: 06ad7e164256 ("drm/amd/display: Destroy DC context while keeping DML and DML2") Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 0607a50c004798a96e62c089a4c34c220179dcb5) Cc: stable@vger.kernel.org
2024-09-10drm/amd/display: Avoid race between dcn10_set_drr() and dc_state_destruct()Tobias Jakobi
dc_state_destruct() nulls the resource context of the DC state. The pipe context passed to dcn10_set_drr() is a member of this resource context. If dc_state_destruct() is called parallel to the IRQ processing (which calls dcn10_set_drr() at some point), we can end up using already nulled function callback fields of struct stream_resource. The logic in dcn10_set_drr() already tries to avoid this, by checking tg against NULL. But if the nulling happens exactly after the NULL check and before the next access, then we get a race. Avoid this by copying tg first to a local variable, and then use this variable for all the operations. This should work, as long as nobody frees the resource pool where the timing generators live. Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3142 Fixes: 06ad7e164256 ("drm/amd/display: Destroy DC context while keeping DML and DML2") Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> Tested-by: Raoul van Rüschen <raoul.van.rueschen@gmail.com> Tested-by: Christopher Snowhill <chris@kode54.net> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Tested-by: Sefa Eyeoglu <contact@scrumplex.net> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit a3cc326a43bdc48fbdf53443e1027a03e309b643) Cc: stable@vger.kernel.org
2024-09-10drm/amdkfd: Add cache line size infoDavid Belanger
Populate cache line size info in topology based on information from IP discovery table. Signed-off-by: David Belanger <david.belanger@amd.com> Reviewed-by: Sreekant Somasekharan <Sreekant.Somasekharan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 4e9fadacddca96a2e6fcee9cc9488b78eb7a6953)
2024-09-10drbd: Add NULL check for net_conf to prevent dereference in state validationMikhail Lobanov
If the net_conf pointer is NULL and the code attempts to access its fields without a check, it will lead to a null pointer dereference. Add a NULL check before dereferencing the pointer. Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: 44ed167da748 ("drbd: rcu_read_lock() and rcu_dereference() for tconn->net_conf") Cc: stable@vger.kernel.org Signed-off-by: Mikhail Lobanov <m.lobanov@rosalinux.ru> Link: https://lore.kernel.org/r/20240909133740.84297-1-m.lobanov@rosalinux.ru Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-09-10drm/tegra: Use iommu_paging_domain_alloc()Lu Baolu
Commit <17de3f5fdd35> ("iommu: Retire bus ops") removes iommu ops from the bus structure. The iommu subsystem no longer relies on bus for operations. So iommu_domain_alloc() interface is no longer relevant. Replace iommu_domain_alloc() with iommu_paging_domain_alloc() which takes the physical device from which the host1x_device virtual device was instantiated. This physical device is a common parent to all physical devices that are part of the virtual device. Suggested-by: Thierry Reding <thierry.reding@gmail.com> Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240902014700.66095-4-baolu.lu@linux.intel.com
2024-09-10drm/rockchip: Use iommu_paging_domain_alloc()Lu Baolu
Commit <421be3ee36a4> ("drm/rockchip: Refactor IOMMU initialisation") has refactored rockchip_drm_init_iommu() to pass a device that the domain is allocated for. Replace iommu_domain_alloc() with iommu_paging_domain_alloc() to retire the former. Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Acked-by: Andy Yan <andyshrk@163.com> Signed-off-by: Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240902014700.66095-3-baolu.lu@linux.intel.com
2024-09-10ACPI: resource: Add another DMI match for the TongFang GMxXGxxWerner Sembach
Internal documentation suggest that the TUXEDO Polaris 15 Gen5 AMD might have GMxXGxX as the board name instead of GMxXGxx. Adding both to be on the safe side. Signed-off-by: Werner Sembach <wse@tuxedocomputers.com> Cc: All applicable <stable@vger.kernel.org> Link: https://patch.msgid.link/20240910094008.1601230-1-wse@tuxedocomputers.com Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2024-09-10ACPI: CPPC: Add support for setting EPP register in FFHMario Limonciello
Some Asus AMD systems are reported to not be able to change EPP values because the BIOS doesn't advertise support for the CPPC MSR and the PCC region is not configured. However the ACPI 6.2 specification allows CPC registers to be declared in FFH: ``` Starting with ACPI Specification 6.2, all _CPC registers can be in PCC, System Memory, System IO, or Functional Fixed Hardware address spaces. OSPM support for this more flexible register space scheme is indicated by the “Flexible Address Space for CPPC Registers” _OSC bit. ``` If this _OSC has been set allow using FFH to configure EPP. Reported-by: al0uette@outlook.com Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218686 Suggested-by: al0uette@outlook.com Tested-by: vderp@icloud.com Tested-by: al0uette@outlook.com Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Link: https://patch.msgid.link/20240910031524.106387-1-superm1@kernel.org Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2024-09-10ACPI: PM: Quirk ASUS ROG M16 to default to S3 sleepLuke D. Jones
The 2023 ASUS ROG Zephyrus M16 can suffer from quite a variety of events causing wakeup from s2idle sleep. The events may come from the EC being noisey, from the MMC reader, from the AniMe matrix display on some models or from AC events. Defaulting to S3 sleep prevents all these wakeup issues. Signed-off-by: Luke D. Jones <luke@ljones.dev> Link: https://patch.msgid.link/20240908053607.4213-1-luke@ljones.dev Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2024-09-10ACPI: video: Add force_vendor quirk for Panasonic Toughbook CF-18Hans de Goede
The Panasonic Toughbook CF-18 advertises both native and vendor backlight control interfaces. But only the vendor one actually works. acpi_video_get_backlight_type() will pick the non working native backlight by default, add a quirk to select the working vendor backlight instead. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://patch.msgid.link/20240907124419.21195-1-hdegoede@redhat.com Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2024-09-10Bluetooth: btrtl: Set msft ext address filter quirk for RTL8852BHilda Wu
For tracking multiple devices concurrently with a condition. The patch enables the HCI_QUIRK_USE_MSFT_EXT_ADDRESS_FILTER quirk on RTL8852B controller. The quirk setting is based on commit 9e14606d8f38 ("Bluetooth: msft: Extended monitor tracking by address filter") With this setting, when a pattern monitor detects a device, this feature issues an address monitor for tracking that device. Let the original pattern monitor keep monitor new devices. Signed-off-by: Hilda Wu <hildawu@realtek.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-09-10Bluetooth: btrtl: Use kvmemdup to simplify the codeLi Zetao
Use kvmemdup instead of kvmalloc() + memcpy() to simplify the code. No functional change intended. Signed-off-by: Li Zetao <lizetao1@huawei.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-09-10Bluetooth: btusb: Add Mediatek MT7925 support ID 0x13d3:0x3608Pavel Nikulin
Add the support ID (0x13d3, 0x3608) to usb_device_id table for Realtek MT7925B14L found on AW-EM637 WiFi+BT modules in 2024 Asus laptops. The device info from /sys/kernel/debug/usb/devices as below. T: Bus=03 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=13d3 ProdID=3608 Rev= 1.00 S: Manufacturer=MediaTek Inc. S: Product=Wireless_Device S: SerialNumber=000000000 C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=100mA A: FirstIf#= 0 IfCount= 3 Cls=e0(wlcon) Sub=01 Prot=01 I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=125us E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms I: If#= 2 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=8a(I) Atr=03(Int.) MxPS= 64 Ivl=125us E: Ad=0a(O) Atr=03(Int.) MxPS= 64 Ivl=125us I:* If#= 2 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=8a(I) Atr=03(Int.) MxPS= 512 Ivl=125us E: Ad=0a(O) Atr=03(Int.) MxPS= 512 Ivl=125us Signed-off-by: Pavel Nikulin <pavel@noa-labs.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-09-10Bluetooth: btrtl: Add the support for RTL8922AMax Chou
Add the support for RTL8922A BT controller on USB interface. The necessary firmware will be submitted to linux-firmware project. The device info from /sys/kernel/debug/usb/devices as below. T: Bus=01 Lev=02 Prnt=02 Port=02 Cnt=01 Dev#= 3 Spd=12 MxCh= 0 D: Ver= 1.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0bda ProdID=8922 Rev= 0.00 S: Manufacturer=Realtek S: Product=Bluetooth Radio S: SerialNumber=00E04C885A01 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms Signed-off-by: Max Chou <max.chou@realtek.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-09-10Bluetooth: hci_ldisc: Use speed set by btattach as oper_speedFrédéric Danis
Starting a BCM UART controller not defined as a platform device or a serdev with "btattach -B /dev/ttyS1 -P bcm -S 3000000" works fine but the serial port remains at the init_speed, i.e. 115200. The oper_speed is only set if a device is declared in ACPI, device tree or as a platform device. This commit copies the serial port speed fixed by hciattach to the oper_speed on line discipline opening. Signed-off-by: Frédéric Danis <frederic.danis@collabora.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-09-10Bluetooth: btnxpuart: Add support for ISO packetsNeeraj Sanjay Kale
This enables btnxpuart driver to handle ISO RX packet when DUT is configured as audio sink. Tested IW612 on iMX8MMini platform and BlueZ-5.77 as follows: 1) Configured DUT with bap_bcast_sink role in pipewire configuration file. 2) Started pipewire and DUT is able to sync with Broadcast source through pipewire. 3) ISO data RX is seen in btmon. 4) Audio/Music is heard on audio jack. Signed-off-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com> Tested-by: Sarveshwar Bajaj <sarveshwar.bajaj@nxp.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-09-10Bluetooth: hci_h4: Add support for ISO packets in h4_recv.hNeeraj Sanjay Kale
This adds ISO packet support in h4_recv.h, which was created before ISO packet handling was added to hci_h4.c and hci_uart.c Signed-off-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-09-10Bluetooth: btusb: Add Realtek RTL8852C support ID 0x0489:0xe122Hilda Wu
Add the support ID (0x0489, 0xe122) to usb_device_id table for Realtek RTL8852C. The device info from /sys/kernel/debug/usb/devices as below. T: Bus=03 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 1.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0489 ProdID=e122 Rev= 0.00 S: Manufacturer=Realtek S: Product=Bluetooth Radio S: SerialNumber=00e04c000001 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms Signed-off-by: Hilda Wu <hildawu@realtek.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-09-10Bluetooth: btusb: Invert LE State flag to set invalid rather then validLuiz Augusto von Dentz
This inverts the LE State flag so by default we assume the controllers would report valid states rather than invalid so it is inline with the respective quirk (HCI_QUIRK_BROKEN_LE_STATES). Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-09-10Bluetooth: hci_uart: Add support for Amlogic HCI UARTYang Li
Add a new HCI protocol HCI_UART_AML for the Amlogic Bluetooth controller. It works on the standard H4 protocol via a 4-wire UART interface, with baud rates up to 4 Mbps. The controller supports two types of commands: the TCI commands and the vendor command. The former is for initial setup including setting baud rates, downloading fw, starting chip and etc, while the latter is for dumping firmware versions and setting public address after firmware updates and normal startup. It was verified on board of T602 (S905X4 + W265S2). dmesg: .. [ 5.313450] Bluetooth: HCI UART protocol AML registered [ 6.506052] Bluetooth: hci0: fw_version: date = 42.28, number = 0xb2fd ... Co-developed-by: Ye He <ye.he@amlogic.com> Signed-off-by: Ye He <ye.he@amlogic.com> Signed-off-by: Yang Li <yang.li@amlogic.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-09-10Bluetooth: btusb: Add MediaTek MT7925-B22M support ID 0x13d3:0x3604Alexander Hall
This patch fixes bluetooth support on the MediaTek MT7925 WiFi 7 + BT 5.3 M.2 chipset that I purchased from aliexpress (and which arrived today). The PCB states that it is an MT7925B22M. Device from /sys/kernel/debug/usb/devices: T: Bus=03 Lev=02 Prnt=03 Port=02 Cnt=01 Dev#= 4 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=13d3 ProdID=3604 Rev= 1.00 S: Manufacturer=MediaTek Inc. S: Product=Wireless_Device S: SerialNumber=000000000 C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=100mA A: FirstIf#= 0 IfCount= 3 Cls=e0(wlcon) Sub=01 Prot=01 I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=125us E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=8a(I) Atr=03(Int.) MxPS= 64 Ivl=125us E: Ad=0a(O) Atr=03(Int.) MxPS= 64 Ivl=125us I: If#= 2 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=8a(I) Atr=03(Int.) MxPS= 512 Ivl=125us E: Ad=0a(O) Atr=03(Int.) MxPS= 512 Ivl=125us High fidelity images I took of the chip itself for future reference: https://archive.org/details/MediaTek-MT7925B22M/ Webpage the chip was purchased from, note it is different from the images taken: https://web.archive.org/web/20240620021119/https://www.aliexpress. us/item/3256806821207897.html Signed-off-by: Alexander Hall <bearodark@gmail.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-09-10Bluetooth: btintel_pcie: Add support for ISO dataKiran
Add support for handling ISO RX and TX packets. Signed-off-by: Kiran <kiran.k@intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-09-10virtio_net: disable premapped mode by defaultXuan Zhuo
Now, the premapped mode encounters some problem. http://lore.kernel.org/all/8b20cc28-45a9-4643-8e87-ba164a540c0a@oracle.com So we disable the premapped mode by default. We can re-enable it in the future. Fixes: f9dac92ba908 ("virtio_ring: enable premapped mode whatever use_dma_api") Reported-by: "Si-Wei Liu" <si-wei.liu@oracle.com> Closes: http://lore.kernel.org/all/8b20cc28-45a9-4643-8e87-ba164a540c0a@oracle.com Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Tested-by: Takero Funaki <flintglass@gmail.com> Link: https://patch.msgid.link/20240906123137.108741-4-xuanzhuo@linux.alibaba.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-10Revert "virtio_net: big mode skip the unmap check"Xuan Zhuo
This reverts commit a377ae542d8d0a20a3173da3bbba72e045bea7a9. Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Tested-by: Takero Funaki <flintglass@gmail.com> Link: https://patch.msgid.link/20240906123137.108741-3-xuanzhuo@linux.alibaba.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-10Revert "virtio_net: rx remove premapped failover code"Xuan Zhuo
This reverts commit defd28aa5acb0fd7c15adc6bc40a8ac277d04dea. Recover the code to disable premapped mode. Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Tested-by: Takero Funaki <flintglass@gmail.com> Link: https://patch.msgid.link/20240906123137.108741-2-xuanzhuo@linux.alibaba.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-10drm/syncobj: Fix syncobj leak in drm_syncobj_eventfd_ioctlT.J. Mercier
A syncobj reference is taken in drm_syncobj_find, but not released if eventfd_ctx_fdget or kzalloc fails. Put the reference in these error paths. Reported-by: Xingyu Jin <xingyuj@google.com> Fixes: c7a472297169 ("drm/syncobj: add IOCTL to register an eventfd") Signed-off-by: T.J. Mercier <tjmercier@google.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com> Reviewed-by. Christian König <christian.koenig@amd.com> CC: stable@vger.kernel.org # 6.6+ Link: https://patchwork.freedesktop.org/patch/msgid/20240909205400.3498337-1-tjmercier@google.com Signed-off-by: Christian König <christian.koenig@amd.com>
2024-09-10nvme-tcp: fix link failure for TCP authArnd Bergmann
The nvme fabric driver calls the nvme_tls_key_lookup() function from nvmf_parse_key() when the keyring is enabled, but this is broken in a configuration with CONFIG_NVME_FABRICS=y and CONFIG_NVME_TCP=m because this leads to the function definition being in a loadable module: x86_64-linux-ld: vmlinux.o: in function `nvmf_parse_key': fabrics.c:(.text+0xb1bdec): undefined reference to `nvme_tls_key_lookup' Move the 'select' up to CONFIG_NVME_FABRICS itself to force this part to be built-in as well if needed. Fixes: 5bc46b49c828 ("nvme-tcp: check for invalidated or revoked key") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Keith Busch <kbusch@kernel.org>
2024-09-10platform/x86: asus-wmi: Disable OOBE experience on Zenbook S 16Bas Nieuwenhuizen
The OOBE experience fades the keyboard backlight in & out continuously, and make the backlight uncontrollable using its device. Workaround taken from https://wiki.archlinux.org/index.php?title=ASUS_Zenbook_UM5606&diff=next&oldid=815547 Signed-off-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl> Reviewed-by: Luke D. Jones <luke@ljones.dev> Link: https://lore.kernel.org/r/20240909223503.1445779-1-bas@basnieuwenhuizen.nl Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2024-09-10drm/stm: add COMMON_CLK dependencyArnd Bergmann
The added lvds driver and a change in the dsi driver resulted in failed builds when COMMON_CLK is disabled: x86_64-linux-ld: drivers/gpu/drm/stm/dw_mipi_dsi-stm.o: in function `dw_mipi_dsi_stm_remove': dw_mipi_dsi-stm.c:(.text+0x51e): undefined reference to `clk_hw_unregister' x86_64-linux-ld: drivers/gpu/drm/stm/lvds.o: in function `lvds_remove': lvds.c:(.text+0xe3): undefined reference to `of_clk_del_provider' x86_64-linux-ld: lvds.c:(.text+0xec): undefined reference to `clk_hw_unregister' x86_64-linux-ld: drivers/gpu/drm/stm/lvds.o: in function `lvds_pll_config': lvds.c:(.text+0xb5d): undefined reference to `clk_hw_get_rate' x86_64-linux-ld: drivers/gpu/drm/stm/lvds.o: in function `lvds_probe': lvds.c:(.text+0x1476): undefined reference to `clk_hw_register' x86_64-linux-ld: lvds.c:(.text+0x148b): undefined reference to `of_clk_hw_simple_get' x86_64-linux-ld: lvds.c:(.text+0x1493): undefined reference to `of_clk_add_hw_provider' x86_64-linux-ld: lvds.c:(.text+0x1535): undefined reference to `clk_hw_unregister' Add this as a dependency for the stm driver itself, since it will be required in practice anyway. Fixes: 185f99b61442 ("drm/stm: dsi: expose DSI PHY internal clock") Fixes: aca1cbc1c986 ("drm/stm: lvds: add new STM32 LVDS Display Interface Transmitter driver") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://patchwork.freedesktop.org/patch/msgid/20240719075454.3595358-1-arnd@kernel.org Signed-off-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com> (cherry picked from commit 26dbffb2a4c4d4639c7b336f6b74a437c23dadd4) Signed-off-by: Maxime Ripard <mripard@kernel.org>
2024-09-10Merge branch 'linus' into timers/coreThomas Gleixner
To update with the latest fixes.
2024-09-10net: ftgmac100: Enable TX interrupt to avoid TX timeoutJacky Chou
Currently, the driver only enables RX interrupt to handle RX packets and TX resources. Sometimes there is not RX traffic, so the TX resource needs to wait for RX interrupt to free. This situation will toggle the TX timeout watchdog when the MAC TX ring has no more resources to transmit packets. Therefore, enable TX interrupt to release TX resources at any time. When I am verifying iperf3 over UDP, the network hangs. Like the log below. root# iperf3 -c 192.168.100.100 -i1 -t10 -u -b0 Connecting to host 192.168.100.100, port 5201 [ 4] local 192.168.100.101 port 35773 connected to 192.168.100.100 port 5201 [ ID] Interval Transfer Bandwidth Total Datagrams [ 4] 0.00-20.42 sec 160 KBytes 64.2 Kbits/sec 20 [ 4] 20.42-20.42 sec 0.00 Bytes 0.00 bits/sec 0 [ 4] 20.42-20.42 sec 0.00 Bytes 0.00 bits/sec 0 [ 4] 20.42-20.42 sec 0.00 Bytes 0.00 bits/sec 0 [ 4] 20.42-20.42 sec 0.00 Bytes 0.00 bits/sec 0 [ 4] 20.42-20.42 sec 0.00 Bytes 0.00 bits/sec 0 [ 4] 20.42-20.42 sec 0.00 Bytes 0.00 bits/sec 0 [ 4] 20.42-20.42 sec 0.00 Bytes 0.00 bits/sec 0 [ 4] 20.42-20.42 sec 0.00 Bytes 0.00 bits/sec 0 [ 4] 20.42-20.42 sec 0.00 Bytes 0.00 bits/sec 0 - - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bandwidth Jitter Lost/Total Datagrams [ 4] 0.00-20.42 sec 160 KBytes 64.2 Kbits/sec 0.000 ms 0/20 (0%) [ 4] Sent 20 datagrams iperf3: error - the server has terminated The network topology is FTGMAC connects directly to a PC. UDP does not need to wait for ACK, unlike TCP. Therefore, FTGMAC needs to enable TX interrupt to release TX resources instead of waiting for the RX interrupt. Fixes: 10cbd6407609 ("ftgmac100: Rework NAPI & interrupts handling") Signed-off-by: Jacky Chou <jacky_chou@aspeedtech.com> Link: https://patch.msgid.link/20240906062831.2243399-1-jacky_chou@aspeedtech.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-09-10net: mdiobus: Debug print fwnode handle instead of raw pointerAlexander Dahl
Was slightly misleading before, because printed is pointer to fwnode, not to phy device, as placement in message suggested. Include header for dev_dbg() declaration while at it. Output before: [ +0.001247] mdio_bus f802c000.ethernet-ffffffff: registered phy 2612f00a fwnode at address 3 Output after: [ +0.001229] mdio_bus f802c000.ethernet-ffffffff: registered phy fwnode /ahb/apb/ethernet@f802c000/ethernet-phy@3 at address 3 Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Alexander Dahl <ada@thorsis.com> Link: https://patch.msgid.link/20240906062256.11289-1-ada@thorsis.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-09-10drm/nouveau/fb: restore init() for ramgp102Ben Skeggs
init() was removed from ramgp102 when reworking the memory detection, as it was thought that the code was only necessary when the driver performs mclk changes, which nouveau doesn't support on pascal. However, it turns out that we still need to execute this on some GPUs to restore settings after DEVINIT, so revert to the original behaviour. v2: fix tags in commit message, cc stable Closes: https://gitlab.freedesktop.org/drm/nouveau/-/issues/319 Fixes: 2c0c15a22fa0 ("drm/nouveau/fb/gp102-ga100: switch to simpler vram size detection method") Cc: stable@vger.kernel.org # 6.6+ Signed-off-by: Ben Skeggs <bskeggs@nvidia.com> Signed-off-by: Danilo Krummrich <dakr@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240904232418.8590-1-bskeggs@nvidia.com
2024-09-10octeontx2-af: Modify SMQ flush sequence to drop packetsNaveen Mamindlapalli
The current implementation of SMQ flush sequence waits for the packets in the TM pipeline to be transmitted out of the link. This sequence doesn't succeed in HW when there is any issue with link such as lack of link credits, link down or any other traffic that is fully occupying the link bandwidth (QoS). This patch modifies the SMQ flush sequence to drop the packets after TL1 level (SQM) instead of polling for the packets to be sent out of RPM/CGX link. Fixes: 5d9b976d4480 ("octeontx2-af: Support fixed transmit scheduler topology") Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com> Reviewed-by: Sunil Kovvuri Goutham <sgoutham@marvell.com> Link: https://patch.msgid.link/20240906045838.1620308-1-naveenm@marvell.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-09-10eth: fbnic: Add devlink firmware version infoLee Trager
This adds support to show firmware version information for both stored and running firmware versions. The version and commit is displayed separately to aid monitoring tools which only care about the version. Example output: # devlink dev info pci/0000:01:00.0: driver fbnic serial_number 88-25-08-ff-ff-01-50-92 versions: running: fw 24.07.15-017 fw.commit h999784ae9df0 fw.bootloader 24.07.10-000 fw.bootloader.commit hfef3ac835ce7 stored: fw 24.07.24-002 fw.commit hc9d14a68b3f2 fw.bootloader 24.07.22-000 fw.bootloader.commit h922f8493eb96 fw.undi 01.00.03-000 Signed-off-by: Lee Trager <lee@trager.us> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Link: https://patch.msgid.link/20240905233820.1713043-1-lee@trager.us Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-09-10net: lan966x: refactor buffer reload functionDaniel Machon
Now that we store everything in the fdma structs, refactor lan966x_fdma_reload() to store and restore the entire struct. Signed-off-by: Daniel Machon <daniel.machon@microchip.com> Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-09-10net: lan966x: use a few FDMA helpers throughoutDaniel Machon
The library provides helpers for a number of DCB and DB operations. Use these throughout the code and remove the old ones. Signed-off-by: Daniel Machon <daniel.machon@microchip.com> Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-09-10net: lan966x: ditch tx->last_in_use variableDaniel Machon
This variable is used in the tx path to determine the last used DCB. The library has the variable last_dcb for the exact same purpose. Ditch the last_in_use variable throughout. Signed-off-by: Daniel Machon <daniel.machon@microchip.com> Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-09-10net: lan966x: use library helper for freeing tx buffersDaniel Machon
The library has the helper fdma_free_phys() for freeing physical FDMA memory. Use it in the exit path. Signed-off-by: Daniel Machon <daniel.machon@microchip.com> Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-09-10net: lan966x: use FDMA library for adding DCB's in the tx pathDaniel Machon
Use the fdma_dcb_add() function to add DCB's in the tx path. This gets rid of the open-coding of nextptr and dataptr handling and leaves it to the library. Signed-off-by: Daniel Machon <daniel.machon@microchip.com> Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-09-10net: lan966x: use the FDMA library for allocation of tx buffersDaniel Machon
Use the two functions: fdma_alloc_phys() and fdma_dcb_init() for rx buffer allocation and use the new buffers throughout. In order to replace the old buffers with the new ones, we have to do the following refactoring: - use fdma_alloc_phys() and fdma_dcb_init() - replace the variables: tx->dma, tx->dcbs and tx->curr_entry with the equivalents from the FDMA struct. - add lan966x_fdma_tx_dataptr_cb callback for obtaining the dataptr. - Initialize FDMA struct values. Signed-off-by: Daniel Machon <daniel.machon@microchip.com> Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-09-10net: lan966x: use library helper for freeing rx buffersDaniel Machon
The library has the helper fdma_free_phys() for freeing physical FDMA memory. Use it in the exit path. Signed-off-by: Daniel Machon <daniel.machon@microchip.com> Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
generated by cgit (git 2.34.1) at 2025-09-11 18:57:08 +0000