| Age | Commit message (Collapse) | Author |
|---|
|
The Xen memory hotplug limit should depend on the memory hotplug
generic option, rather than the Xen balloon configuration. It's
possible to have a kernel with generic memory hotplug enabled, but
without Xen balloon enabled, at which point memory hotplug won't work
correctly due to the size limitation of the p2m.
Rename the option to XEN_MEMORY_HOTPLUG_LIMIT since it's no longer
tied to ballooning.
Fixes: 9e2369c06c8a18 ("xen: add helpers to allocate unpopulated memory")
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Link: https://lore.kernel.org/r/20210324122424.58685-2-roger.pau@citrix.com
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
|
|
gcc points out an incorrect enum assignment:
drivers/net/ethernet/chelsio/inline_crypto/ch_ktls/chcr_ktls.c: In function 'chcr_ktls_cpl_set_tcb_rpl':
drivers/net/ethernet/chelsio/inline_crypto/ch_ktls/chcr_ktls.c:684:22: warning: implicit conversion from 'enum <anonymous>' to 'enum ch_ktls_open_state' [-Wenum-conversion]
This appears harmless, and should apparently use 'CH_KTLS_OPEN_SUCCESS'
instead of 'false', with the same value '0'.
Fixes: efca3878a5fb ("ch_ktls: Issue if connection offload fails")
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently the error return path when lfs fails to allocate is not free'ing
the memory allocated to buf. Fix this by adding the missing kfree.
Addresses-Coverity: ("Resource leak")
Fixes: f7884097141b ("octeontx2-af: Formatting debugfs entry rsrc_alloc.")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Current calculation for diff of TMR_ADD register value may have
64-bit overflow in this code line, when long type scaled_ppm is
large.
adj *= scaled_ppm;
This patch is to resolve it by using mul_u64_u64_div_u64().
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fixes from Stephen Boyd:
"Three fixes for the Qualcomm clk driver: two for regressions this
merge window and one for a long-standing problem that only popped up
now that eMMC is being used"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: qcom: gcc-sc7180: Use floor ops for the correct sdcc1 clk
clk: qcom: rcg2: Rectify clk_gfx3d rate rounding without mux division
clk: qcom: rpmh: Update the XO clock source for SC7280
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform drivers fixes from Hans de Goede:
"A set of bug-fixes and some model specific quirks.
Summary:
- dell-wmi-sysman: A set of probe-error-exit-handling fixes to fix
some systems which advertise the WMI GUIDs, but are not compatible,
not booting
- intel-vbtn/intel-hid: Misc. bugfixes
- intel_pmc: Bug-fixes + a quirk to lower suspend power-consumption
on Tiger Lake
- thinkpad_acpi: misc bugfixes"
* tag 'platform-drivers-x86-v5.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: intel_pmc_core: Ignore GBE LTR on Tiger Lake platforms
platform/x86: intel_pmc_core: Update Kconfig
platform/x86: intel_pmt_crashlog: Fix incorrect macros
platform/x86: intel_pmt_class: Initial resource to 0
platform/x86: intel-vbtn: Stop reporting SW_DOCK events
platform/x86: dell-wmi-sysman: Cleanup create_attributes_level_sysfs_files()
platform/x86: dell-wmi-sysman: Make sysman_init() return -ENODEV of the interfaces are not found
platform/x86: dell-wmi-sysman: Cleanup sysman_init() error-exit handling
platform/x86: dell-wmi-sysman: Fix release_attributes_data() getting called twice on init_bios_attributes() failure
platform/x86: dell-wmi-sysman: Make it safe to call exit_foo_attributes() multiple times
platform/x86: dell-wmi-sysman: Fix possible NULL pointer deref on exit
platform/x86: dell-wmi-sysman: Fix crash caused by calling kset_unregister twice
platform/x86: thinkpad_acpi: Disable DYTC CQL mode around switching to balanced mode
platform/x86: thinkpad_acpi: Allow the FnLock LED to change state
platform/x86: thinkpad_acpi: check dytc version for lapmode sysfs
platform/x86: intel-hid: Support Lenovo ThinkPad X1 Tablet Gen 2
|
|
Port enable is not complete until ACK = 0. Change
__afu_port_enable() to guarantee that the enable process
is complete by polling for ACK == 0.
Signed-off-by: Russ Weight <russell.h.weight@intel.com>
Reviewed-by: Tom Rix <trix@redhat.com>
Reviewed-by: Matthew Gerlach <matthew.gerlach@linux.intel.com>
Acked-by: Wu Hao <hao.wu@intel.com>
Signed-off-by: Moritz Fischer <mdf@kernel.org>
|
|
ACPICA commit 29da9a2a3f5b2c60420893e5c6309a0586d7a329
ACPI is allocating an object using kmalloc(), but then frees it
using kmem_cache_free(<"Acpi-Namespace" kmem_cache>).
This is wrong and can lead to boot failures manifesting like this:
hpet0: 3 comparators, 64-bit 100.000000 MHz counter
clocksource: Switched to clocksource tsc-early
BUG: unable to handle page fault for address: 000000003ffe0018
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: 0000 [#1] SMP PTI
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.6.0+ #211
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
Ubuntu-1.8.2-1ubuntu1 04/01/2014
RIP: 0010:kmem_cache_alloc+0x70/0x1d0
Code: 00 00 4c 8b 45 00 65 49 8b 50 08 65 4c 03 05 6f cc e7 7e 4d 8b
20 4d 85 e4 0f 84 3d 01 00 00 8b 45 20 48 8b 7d 00 48 8d 4a 01 <49> 8b
1c 04 4c 89 e0 65 48 0f c7 0f 0f 94 c0 84 c0 74 c5 8b 45 20
RSP: 0000:ffffc90000013df8 EFLAGS: 00010206
RAX: 0000000000000018 RBX: ffffffff81c49200 RCX: 0000000000000002
RDX: 0000000000000001 RSI: 0000000000000dc0 RDI: 000000000002b300
RBP: ffff88803e403d00 R08: ffff88803ec2b300 R09: 0000000000000001
R10: 0000000000000dc0 R11: 0000000000000006 R12: 000000003ffe0000
R13: ffffffff8110a583 R14: 0000000000000dc0 R15: ffffffff81c49a80
FS: 0000000000000000(0000) GS:ffff88803ec00000(0000)
knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000000003ffe0018 CR3: 0000000001c0a001 CR4: 00000000003606f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
__trace_define_field+0x33/0xa0
event_trace_init+0xeb/0x2b4
tracer_init_tracefs+0x60/0x195
? register_tracer+0x1e7/0x1e7
do_one_initcall+0x74/0x160
kernel_init_freeable+0x190/0x1f0
? rest_init+0x9a/0x9a
kernel_init+0x5/0xf6
ret_from_fork+0x35/0x40
CR2: 000000003ffe0018
---[ end trace 707efa023f2ee960 ]---
RIP: 0010:kmem_cache_alloc+0x70/0x1d0
Bisection leads to unrelated changes in slab; Vlastimil Babka
suggests an unrelated layout or slab merge change merely exposed
the underlying bug.
Link: https://lore.kernel.org/lkml/4dc93ff8-f86e-f4c9-ebeb-6d3153a78d03@oracle.com/
Link: https://lore.kernel.org/r/a1461e21-c744-767d-6dfc-6641fd3e3ce2@siemens.com
Link: https://github.com/acpica/acpica/commit/29da9a2a
Fixes: f79c8e4136ea ("ACPICA: Namespace: simplify creation of the initial/default namespace")
Reported-by: Jan Kiszka <jan.kiszka@siemens.com>
Diagnosed-by: Vlastimil Babka <vbabka@suse.cz>
Diagnosed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Kaneda <erik.kaneda@intel.com>
Cc: 5.10+ <stable@vger.kernel.org> # 5.10+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
To optimize some task deferring it until runtime resume unless someone
holds a runtime PM reference (because in this case the task can be done
w/o the overhead of runtime resume), we have to use the runtime PM
get-if-active logic: If the runtime PM usage count is 0 (and so
get-if-in-use would return false) the runtime suspend handler is not
necessarily called yet (it could be just pending), so the device is not
necessarily powered down, and so the runtime resume handler is not
guaranteed to be called.
The fence revocation depends on the above deferral, so add a
get-if-active helper and use it during fence revocation.
v2:
- Add code comment explaining the fence reg programming deferral logic
to i915_vma_revoke_fence(). (Chris)
- Add Cc: stable and Fixes: tags. (Chris)
- Fix the function docbook comment.
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: <stable@vger.kernel.org> # v4.12+
Fixes: 181df2d458f3 ("drm/i915: Take rpm wakelock for releasing the fence on unbind")
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210322204223.919936-1-imre.deak@intel.com
(cherry picked from commit 9d58aa46291d4d696bb1eac3436d3118f7bf2573)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
These two lines of code don't meet the linux kernel style,
and use a space after these keywords:
if, switch, case, for, do, while.
Do not add spaces around (inside) parenthesized expressions.
So remove the redundant space.
Signed-off-by: Qiang Ma <maqianga@uniontech.com>
Link: https://lore.kernel.org/r/20210309072059.22107-1-maqianga@uniontech.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Rearrange optional stuff in pps_gpio_setup() so it will go after mandatory one
and with reduced indentation. This will increase readability of the sources.
Acked-by: Rodolfo Giometti <giometti@enneenne.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210318130321.24227-7-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In most parts of the code the platform device is not used.
Use struct device pointer directly to reduce code size and
increase readability.
Acked-by: Rodolfo Giometti <giometti@enneenne.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210318130321.24227-6-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Device property API allows to gather device resources from different sources,
such as ACPI. Convert the drivers to unleash the power of device property API.
Acked-by: Rodolfo Giometti <giometti@enneenne.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210318130321.24227-5-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Platform data is a legacy interface to supply device properties
to the driver. In this case we even don't have in-kernel users
for it. Just remove it for good.
Acked-by: Rodolfo Giometti <giometti@enneenne.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210318130321.24227-4-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The timer along with GPIO API are NULL-aware, there is no need to test
against existing GPIO echo line.
Acked-by: Rodolfo Giometti <giometti@enneenne.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210318130321.24227-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When GPIO APIs return -EPROBE_DEFER there is no need to print the message,
especially taking into consideration that it may repeat several times.
Use dev_err_probe() to avoid log noise in such cases.
Acked-by: Rodolfo Giometti <giometti@enneenne.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210318130321.24227-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When requesting optional GPIO echo line, bail out on error,
so user will know that something wrong with the existing property.
Acked-by: Rodolfo Giometti <giometti@enneenne.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210318130321.24227-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
User space needs to know if binder transactions occurred to frozen
processes. Introduce a new BINDER_GET_FROZEN ioctl and keep track of
transactions occurring to frozen proceses.
Signed-off-by: Marco Ballesio <balejs@google.com>
Signed-off-by: Li Li <dualli@google.com>
Acked-by: Todd Kjos <tkjos@google.com>
Link: https://lore.kernel.org/r/20210316011630.1121213-4-dualli@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
when interrupted by a signal, binder_wait_for_work currently returns
-ERESTARTSYS. This error code isn't propagated to user space, but a way
to handle interruption due to signals must be provided to code using
this API.
Replace this instance of -ERESTARTSYS with -EINTR, which is propagated
to user space.
binder_wait_for_work
Signed-off-by: Marco Ballesio <balejs@google.com>
Signed-off-by: Li Li <dualli@google.com>
Test: built, booted, interrupted a worker thread within
Acked-by: Todd Kjos <tkjos@google.com>
Link: https://lore.kernel.org/r/20210316011630.1121213-3-dualli@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Frozen tasks can't process binder transactions, so a way is required to
inform transmitting ends of communication failures due to the frozen
state of their receiving counterparts. Additionally, races are possible
between transitions to frozen state and binder transactions enqueued to
a specific process.
Implement BINDER_FREEZE ioctl for user space to inform the binder driver
about the intention to freeze or unfreeze a process. When the ioctl is
called, block the caller until any pending binder transactions toward
the target process are flushed. Return an error to transactions to
processes marked as frozen.
Co-developed-by: Todd Kjos <tkjos@google.com>
Acked-by: Todd Kjos <tkjos@google.com>
Signed-off-by: Marco Ballesio <balejs@google.com>
Signed-off-by: Todd Kjos <tkjos@google.com>
Signed-off-by: Li Li <dualli@google.com>
Link: https://lore.kernel.org/r/20210316011630.1121213-2-dualli@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
__stringify macro function expands its arguments, but in this messages
we expect to see ioctl request name instead of it's _IOC macro
expansion.
$ cat stringify.c
#include <stdio.h>
#include <asm/ioctl.h>
#define __stringify_1(x) #x
#define __stringify(x) __stringify_1(x)
#define VMCI_DO_IOCTL(ioctl_name) \
char *name = __stringify(IOCTL_VMCI_ ## ioctl_name);
int main() {
VMCI_DO_IOCTL(INIT_CONTEXT)
printf("%s\n", name);
}
$ cc stringify.c
$ ./a.out
(((0U) << (((0+8)+8)+14)) | (((7)) << (0+8)) | (((0xa0)) << 0) | ((0) << ((0+8)+8)))
Signed-off-by: Gleb Fotengauer-Malinovskiy <glebfm@altlinux.org>
Link: https://lore.kernel.org/r/20210302153346.300416-1-glebfm@altlinux.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This fixes the following sparse warnings:
drivers/misc/sgi-xp/xpc_main.c:210:23: warning: Using plain integer as
NULL pointer
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Reviewed-by: Steve Wahl <steve.wahl@hpe.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Link: https://lore.kernel.org/r/1615885041-68750-1-git-send-email-yang.lee@linux.alibaba.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
s/mesured/measured/ .......twice
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com>
Link: https://lore.kernel.org/r/20210319052554.966-1-unixbhaskar@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Use kobj_to_dev() instead of open-coding it
Signed-off-by: dongjian <dongjian@yulong.com>
Link: https://lore.kernel.org/r/1615877987-32163-1-git-send-email-dj0227@163.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
It's slightly cleaner to use the clamp() macro instead of open coding
this.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/YEedHNwqEH8fvjkD@mwanda
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This function always return '0' and no callers use the return value.
So make it a void function.
This eliminates the following coccicheck warning:
./drivers/char/mwave/tp3780i.c:182:5-11: Unneeded variable: "retval".
Return "0" on line 187
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Link: https://lore.kernel.org/r/1615366834-20545-1-git-send-email-yang.lee@linux.alibaba.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This fixes below build warning with extra build checks.
$ make W=1
../drivers/virt/acrn/vm.c:105: warning: expecting prototype for
acrn_inject_msi(). Prototype was for acrn_msi_inject() instead
Fixes: c7cf8d27244f ("virt: acrn: Introduce interrupt injection interfaces")
Signed-off-by: Shuo Liu <shuo.a.liu@intel.com>
Link: https://lore.kernel.org/r/20210311015206.19715-1-shuo.a.liu@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
It is better to rely on the API provided by the MM layer instead of
directly manipulating the mm_users field.
Acked-by: Frederic Barrat <fbarrat@linux.ibm.com>
Acked-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Laurent Dufour <ldufour@linux.ibm.com>
Link: https://lore.kernel.org/r/20210310174405.51044-1-ldufour@linux.ibm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
s/filesytem/filesystem/
s/symantics/semantics/
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com>
Link: https://lore.kernel.org/r/20210322023307.168754-1-unixbhaskar@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Logging an error when kmalloc fails is not necessary (and in general
should be avoided) because the malloc failure will already complain
loudly itself.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210217102501.31758-3-hdegoede@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
sensors to -ENODEV
Modern HP laptops do not necessarily actually contain a lis3lv02d
sensor, yet they still define a HPQ6007 device in there ACPI tables.
This leads to the following messages being logged in dmesg:
[ 17.376342] hp_accel: laptop model unknown, using default axes configuration
[ 17.399766] lis3lv02d: unknown sensor type 0x0
[ 17.399804] hp_accel: probe of HPQ6007:00 failed with error -22
The third message is unnecessary and does not provide any useful info,
change the return value for unknown sensors to -ENODEV. This is the
proper return value to indicate that the driver will not be handling the
device and it silences the pr_warn printing the third message.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=199715
Link: https://lore.kernel.org/r/20210217102501.31758-2-hdegoede@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Before this commit lis3lv02d_get_pwron_wait() had a WARN_ONCE() to catch
a potential divide by 0. WARN macros should only be used to catch internal
kernel bugs and that is not the case here. We have been receiving a lot of
bug reports about kernel backtraces caused by this WARN.
The div value being checked comes from the lis3->odrs[] array. Which
is sized to be a power-of-2 matching the number of bits in lis3->odr_mask.
The only lis3 model where this array is not entirely filled with non zero
values. IOW the only model where we can hit the div == 0 check is the
3dc ("8 bits 3DC sensor") model:
int lis3_3dc_rates[16] = {0, 1, 10, 25, 50, 100, 200, 400, 1600, 5000};
Note the 0 value at index 0, according to the datasheet an odr index of 0
means "Power-down mode". HP typically uses a lis3 accelerometer for HDD
fall protection. What I believe is happening here is that on newer
HP devices, which only contain a SDD, the BIOS is leaving the lis3 device
powered-down since it is not used for HDD fall protection.
Note that the lis3_3dc_rates array initializer only specifies 10 values,
which matches the datasheet. So it also contains 6 zero values at the end.
Replace the WARN with a normal check, which treats an odr index of 0
as power-down and uses a normal dev_err() to report the error in case
odr index point past the initialized part of the array.
Fixes: 1510dd5954be ("lis3lv02d: avoid divide by zero due to unchecked")
Cc: stable@vger.kernel.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=785814
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1817027
BugLink: https://bugs.centos.org/view.php?id=10720
Link: https://lore.kernel.org/r/20210217102501.31758-1-hdegoede@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
gcc-11 starts warning about misleading indentation inside of macros:
drivers/misc/kgdbts.c: In function ‘kgdbts_break_test’:
drivers/misc/kgdbts.c:103:9: error: this ‘if’ clause does not guard... [-Werror=misleading-indentation]
103 | if (verbose > 1) \
| ^~
drivers/misc/kgdbts.c:200:9: note: in expansion of macro ‘v2printk’
200 | v2printk("kgdbts: breakpoint complete\n");
| ^~~~~~~~
drivers/misc/kgdbts.c:105:17: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the ‘if’
105 | touch_nmi_watchdog(); \
| ^~~~~~~~~~~~~~~~~~
The code looks correct to me, so just reindent it for readability.
Fixes: e8d31c204e36 ("kgdb: add kgdb internal test suite")
Acked-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20210322164308.827846-1-arnd@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch adds support for Xilinx Dynamic Function eXchange(DFX) AXI
shutdown manager IP. It can be used to safely handling the AXI traffic
on a Reconfigurable Partition when it is undergoing dynamic reconfiguration
and there by preventing system deadlock that may occur if AXI transactions
are interrupted during reconfiguration.
PR-Decoupler and AXI shutdown manager are completely different IPs.
But both the IP registers are compatible and also both belong to the
same sub-system (fpga-bridge).So using same driver for both IP's.
Signed-off-by: Nava kishore Manne <nava.manne@xilinx.com>
Reviewed-by: Tom Rix <trix@redhat.com>
Signed-off-by: Moritz Fischer <mdf@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Use already prepared dev_err_probe() introduced by commit a787e5400a1c
("driver core: add device probe log helper").
It simplifies EPROBE_DEFER handling.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Moritz Fischer <mdf@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The current code produces an error message on devm_gpiod_get() errors even
when the error is -EPROBE_DEFER, which should be silent.
This has been observed producing a significant amount of messages like:
xlnx-slave-spi spi1.1: Failed to get PROGRAM_B gpio: -517
Fix and simplify code by using the dev_err_probe() helper function.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Fixes: dd2784c01d93 ("fpga manager: xilinx-spi: check INIT_B pin during write_init")
Fixes: 061c97d13f1a ("fpga manager: Add Xilinx slave serial SPI driver")
Signed-off-by: Moritz Fischer <mdf@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Commit 098214999c8f added fetching of the AUX_DPHY register
values from the vbios, but it also changed the default values
in the case when there are no values in the vbios. This causes
problems with displays with high refresh rates. To fix this,
switch back to the original default value for AUX_DPHY_TX_CONTROL.
Fixes: 098214999c8f ("drm/amd/display: Read VBIOS Golden Settings Tbl")
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1426
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Igor Kravchenko <Igor.Kravchenko@amd.com>
Cc: Aric Cyr <Aric.Cyr@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: stable@vger.kernel.org
|
|
Add new DID.
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
Due to a HW limitation, the Latency Tolerance Reporting (LTR) value
programmed in the Tiger Lake GBE controller is not large enough to allow
the platform to enter Package C10, which in turn prevents the platform from
achieving its low power target during suspend-to-idle. Ignore the GBE LTR
value on Tiger Lake. LTR ignore functionality is currently performed solely
by a debugfs write call. Split out the LTR code into its own function that
can be called by both the debugfs writer and by this work around.
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Reviewed-by: Sasha Neftin <sasha.neftin@intel.com>
Cc: intel-wired-lan@lists.osuosl.org
Reviewed-by: Rajneesh Bhardwaj <irenic.rajneesh@gmail.com>
Link: https://lore.kernel.org/r/20210319201844.3305399-2-david.e.box@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
The intel_pmc_core driver is mostly used as a debugging driver for Intel
platforms that support SLPS0 (S0ix). But the driver may also be used to
communicate actions to the PMC in order to ensure transition to SLPS0 on
some systems and architectures. As such the driver should be built on all
platforms it supports. Indicate this in the Kconfig. Also update the list
of supported features.
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Suggested-by: Mario Limonciello <mario.limonciello@dell.com>
Link: https://lore.kernel.org/r/20210319201844.3305399-1-david.e.box@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Fixes off-by-one bugs in the macro assignments for the crashlog control
bits. Was initially tested on emulation but bug revealed after testing on
silicon.
Fixes: 5ef9998c96b0 ("platform/x86: Intel PMT Crashlog capability driver")
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Link: https://lore.kernel.org/r/20210317024455.3071477-2-david.e.box@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Initialize the struct resource in intel_pmt_dev_register to zero to avoid a
fault should the char *name field be non-zero.
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Link: https://lore.kernel.org/r/20210317024455.3071477-1-david.e.box@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
add null-check on function pointer before dereference on ops->cursor
Reported-by: syzbot+b67aaae8d3a927f68d20@syzkaller.appspotmail.com
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Du Cheng <ducheng2@gmail.com>
Link: https://lore.kernel.org/r/20210312081421.452405-1-ducheng2@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Allow map and unmap of the client dma buffer only when the client is not
connected. The functions return -EPROTO if the client is already connected.
This is to fix the race when traffic may start or stop when buffer
is not available.
Cc: <stable@vger.kernel.org> #v5.11+
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20210318055959.305627-1-tomas.winkler@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When retrying a deferred probe, any old defer reason string should be
discarded. Otherwise, if the probe is deferred again at a different spot,
but without setting a message, the now incorrect probe reason will remain.
This was observed with the i.MX I2C driver, which ultimately failed
to probe due to lack of the GPIO driver. The probe defer for GPIO
doesn't record a message, but a previous probe defer to clock_get did.
This had the effect that /sys/kernel/debug/devices_deferred listed
a misleading probe deferral reason.
Cc: stable <stable@vger.kernel.org>
Fixes: d090b70ede02 ("driver core: add deferring probe reason to devices_deferred property")
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Link: https://lore.kernel.org/r/20210319110459.19966-1-a.fatoum@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
On some Intel platforms, audio noise can be detected due to
high pcie speed switch latency.
This patch leaverages ppfeaturemask to fix to the highest pcie
speed then disable pcie switching.
v2:
coding style fix
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
The "u16 CcxRmState[2];" array field in struct "rtllib_network" has 4
bytes in total while the operations performed on this array through-out
the code base are only 2 bytes.
The "CcxRmState" field is fed only 2 bytes of data using memcpy():
(In rtllib_rx.c:1972)
memcpy(network->CcxRmState, &info_element->data[4], 2)
With "info_element->data[]" being a u8 array, if 2 bytes are written
into "CcxRmState" (whose one element is u16 size), then the 2 u8
elements from "data[]" gets squashed and written into the first element
("CcxRmState[0]") while the second element ("CcxRmState[1]") is never
fed with any data.
Same in file rtllib_rx.c:2522:
memcpy(dst->CcxRmState, src->CcxRmState, 2);
The above line duplicates "src" data to "dst" but only writes 2 bytes
(and not 4, which is the actual size). Again, only 1st element gets the
value while the 2nd element remains uninitialized.
This later makes operations done with CcxRmState unpredictable in the
following lines as the 1st element is having a squashed number while the
2nd element is having an uninitialized random number.
rtllib_rx.c:1973: if (network->CcxRmState[0] != 0)
rtllib_rx.c:1977: network->MBssidMask = network->CcxRmState[1] & 0x07;
network->MBssidMask is also of type u8 and not u16.
Fix this by changing the type of "CcxRmState" from u16 to u8 so that the
data written into this array and read from it make sense and are not
random values.
NOTE: The wrong initialization of "CcxRmState" can be seen in the
following commit:
commit ecdfa44610fa ("Staging: add Realtek 8192 PCI wireless driver")
The above commit created a file `rtl8192e/ieee80211.h` which used to
have the faulty line. The file has been deleted (or possibly renamed)
with the contents copied in to a new file `rtl8192e/rtllib.h` along with
additional code in the commit 94a799425eee (tagged in Fixes).
Fixes: 94a799425eee ("From: wlanfae <wlanfae@realtek.com> [PATCH 1/8] rtl8192e: Import new version of driver from realtek")
Cc: stable@vger.kernel.org
Signed-off-by: Atul Gopinathan <atulgopinathan@gmail.com>
Link: https://lore.kernel.org/r/20210323113413.29179-2-atulgopinathan@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The variable "info_element" is of the following type:
struct rtllib_info_element *info_element
defined in drivers/staging/rtl8192e/rtllib.h:
struct rtllib_info_element {
u8 id;
u8 len;
u8 data[];
} __packed;
The "len" field defines the size of the "data[]" array. The code is
supposed to check if "info_element->len" is greater than 4 and later
equal to 6. If this is satisfied then, the last two bytes (the 4th and
5th element of u8 "data[]" array) are copied into "network->CcxRmState".
Right now the code uses "memcpy()" with the source as "&info_element[4]"
which would copy in wrong and unintended information. The struct
"rtllib_info_element" has a size of 2 bytes for "id" and "len",
therefore indexing will be done in interval of 2 bytes. So,
"info_element[4]" would point to data which is beyond the memory
allocated for this pointer (that is, at x+8, while "info_element" has
been allocated only from x to x+7 (2 + 6 => 8 bytes)).
This patch rectifies this error by using "&info_element->data[4]" which
correctly copies the last two bytes of "data[]".
NOTE: The faulty line of code came from the following commit:
commit ecdfa44610fa ("Staging: add Realtek 8192 PCI wireless driver")
The above commit created the file `rtl8192e/ieee80211/ieee80211_rx.c`
which had the faulty line of code. This file has been deleted (or
possibly renamed) with the contents copied in to a new file
`rtl8192e/rtllib_rx.c` along with additional code in the commit
94a799425eee (tagged in Fixes).
Fixes: 94a799425eee ("From: wlanfae <wlanfae@realtek.com> [PATCH 1/8] rtl8192e: Import new version of driver from realtek")
Cc: stable@vger.kernel.org
Signed-off-by: Atul Gopinathan <atulgopinathan@gmail.com>
Link: https://lore.kernel.org/r/20210323113413.29179-1-atulgopinathan@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This LTE modem (M.2 card) has a bug in its power management:
there is some kind of race condition for U3 wake-up between the host and
the device. The modem firmware sometimes crashes/locks when both events
happen at the same time and the modem fully drops off the USB bus (and
sometimes re-enumerates, sometimes just gets stuck until the next
reboot).
Tested with the modem wired to the XHCI controller on an AMD 3015Ce
platform. Without the patch, the modem dropped of the USB bus 5 times in
3 days. With the quirk, it stayed connected for a week while the
'runtime_suspended_time' counter incremented as excepted.
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
Link: https://lore.kernel.org/r/20210319124802.2315195-1-vpalatin@chromium.org
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Do not log the successful-probe message until the tty device has been
registered.
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20210322155318.9837-9-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
