summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2021-04-09habanalabs: support HW blocks vm showSagiv Ozeri
Improve "vm" debugfs node to print also the virtual addresses which are currently mapped to HW blocks in the device. Signed-off-by: Sagiv Ozeri <sozeri@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2021-04-09habanalabs: use a single FW loading bringup flagOfir Bitton
For simplicity, use a single bringup flag indicating which FW binaries should loaded to device. Signed-off-by: Ofir Bitton <obitton@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2021-04-09habanalabs: use correct define for 32-bit max valueOded Gabbay
Timeout in wait for interrupt is in 32-bit variable so we need to use the correct maximum value to compare. Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2021-04-09habanalabs: wait for interrupt supportOfir Bitton
In order to support command submissions from user space, the driver need to add support for user interrupt completions. The driver will allow multiple user threads to wait for an interrupt and perform a comparison with a given user address once interrupt expires. Signed-off-by: Ofir Bitton <obitton@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2021-04-09habanalabs: enable all IRQs for user interrupt supportOfir Bitton
In order to support user interrupts, driver must enable all MSI-X interrupts for any case user will trigger them. We differentiate between a valid user interrupt and a non valid one. Signed-off-by: Ofir Bitton <obitton@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2021-04-09habanalabs: reset device in case of sync errorOhad Sharabi
As the F/wW is the first to detect out of sync event, a new event is added to notify the driver on such event. In which case the driver performs hard reset. Signed-off-by: Ohad Sharabi <osharabi@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2021-04-09habanalabs: change default CS timeout to 30 secondsOded Gabbay
Because our graph contains network operations, we need to account for delay in the network. 5 seconds timeout per CS is not enough to account for that. Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2021-04-09habanalabs: print if device is used on FD closeOded Gabbay
Notify to the user that although he closed the FD, the device is still in use because there are live CS and/or memory mappings (mmaps). Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2021-04-09habanalabs: reset_upon_device_release is for bring-upOded Gabbay
Move the field to correct location in structure and remove comment. Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2021-04-09habanalabs: fail reset if device is not idleOded Gabbay
After any reset (soft or hard) the device (the engines/QMANs) should be idle. If they are not idle, fail the reset. If it is soft-reset, the driver will try to do hard-reset automatically. If it is hard-reset, the driver will make the device non-operational. Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2021-04-09habanalabs: reset after device is actually releasedOded Gabbay
The device is actually released only after the refcnt of the hpriv structure is 0, which means all its contexts were closed. If we reset the device while a context is still open, there are possibilities for unexpected behavior and crashes. For example, if the process has a mapping of a register block that is now currently being reset, and the process writes/reads to that block during the reset, the device can get stuck. Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2021-04-09habanalabs: add reset support when user closes FDOfir Bitton
In order to support command submissions that are done directly from user space, the driver must perform soft reset once user closes its FD. In case the soft reset fails or device is not idle, a hard reset should be performed. Signed-off-by: Ofir Bitton <obitton@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2021-04-09habanalabs: set max asid to 2farah kassabri
currently we support only 2 asids in all asics. asid 0 for driver, and asic 1 for user. no need to setup 1024 asids configurations at init phase. Signed-off-by: farah kassabri <fkassabri@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2021-04-09bus: mhi: core: Fix shadow declarationsManivannan Sadhasivam
This commit fixes below sparse warnings with W=2 about shadow declarations: drivers/bus/mhi/core/main.c: In function ‘parse_xfer_event’: drivers/bus/mhi/core/main.c:667:17: warning: declaration of ‘flags’ shadows a previous local [-Wshadow] 667 | unsigned long flags; | ^~~~~ drivers/bus/mhi/core/main.c:565:16: note: shadowed declaration is here 565 | unsigned long flags = 0; | ^~~~~ drivers/bus/mhi/core/main.c: In function ‘mhi_process_ctrl_ev_ring’: drivers/bus/mhi/core/main.c:856:23: warning: declaration of ‘new_state’ shadows a previous local [-Wshadow] 856 | enum mhi_pm_state new_state; | ^~~~~~~~~ drivers/bus/mhi/core/main.c:837:19: note: shadowed declaration is here 837 | enum mhi_state new_state; | ^~~~~~~~~ Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2021-04-08bus: mhi: pci_generic: Constify mhi_controller_config struct definitionsManivannan Sadhasivam
"mhi_controller_config" struct is not modified inside "mhi_pci_dev_info" struct. So constify the instances. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2021-04-08bus: mhi: pci_generic: Introduce Foxconn T99W175 supportJarvis Jiang
Add support for T99W175 modems, this modem series is based on SDX55 qcom chip. The modem is mainly based on MBIM protocol for both the data and control path. This patch adds support for below modems: - T99W175(based on sdx55), Both for eSIM and Non-eSIM - DW5930e(based on sdx55), With eSIM, It's also T99W175 - DW5930e(based on sdx55), Non-eSIM, It's also T99W175 This patch was tested with Ubuntu 20.04 X86_64 PC as host Signed-off-by: Jarvis Jiang <jarvis.w.jiang@gmail.com> Reviewed-by: Loic Poulain <loic.poulain@linaro.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20210408095524.3559-1-jarvis.w.jiang@gmail.com Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2021-04-08Merge tag 'extcon-next-for-5.13' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/extcon into char-misc-next Chanwoo writes: Update extcon next for v5.13 Detailed description for this pull request: 1. Update extcon provider driver - Add the support of charging interrupt to detect charger connector for extcon-max8997.c - Detect OTG when USB_ID pin is connected to ground for extcon-sm5502.c - Add the support for VBUS detection for extcon-qcom-spmi-misc.c and replace qcom,pm8941-misc binding document with yaml style. * tag 'extcon-next-for-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/extcon: extcon: qcom-spmi: Add support for VBUS detection bindings: pm8941-misc: Add support for VBUS detection bindings: pm8941-misc: Convert bindings to YAML extcon: sm5502: Detect OTG when USB_ID is connected to ground extcon: max8997: Add CHGINS and CHGRM interrupt handling
2021-04-08Merge tag 'fpga-late-for-5.13' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/mdf/linux-fpga into char-misc-next Moritz writes: Second set of FPGA Manager changes for 5.13-rc1 FPGA Manager: - Russ' first change improves port_enable reliability - Russ' second change adds a new device ID for a DFL device - Geert's change updates the examples in binding with dt overlay sugar syntax All patches have been reviewed on the mailing list, and have been in the last linux-next releases (as part of my for-next branch) without issues. Signed-off-by: Moritz Fischer <mdf@kernel.org> * tag 'fpga-late-for-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/mdf/linux-fpga: fpga: dfl: pci: add DID for D5005 PAC cards dt-bindings: fpga: fpga-region: Convert to sugar syntax fpga: dfl: afu: harden port enable logic fpga: Add support for Xilinx DFX AXI Shutdown manager dt-bindings: fpga: Add compatible value for Xilinx DFX AXI shutdown manager fpga: xilinx-pr-decoupler: Simplify code by using dev_err_probe() fpga: fpga-mgr: xilinx-spi: fix error messages on -EPROBE_DEFER
2021-04-08bus: mhi: core: Sanity check values from remote device before useJeffrey Hugo
When parsing the structures in the shared memory, there are values which come from the remote device. For example, a transfer completion event will have a pointer to the tre in the relevant channel's transfer ring. As another example, event ring elements may specify a channel in which the event occurred, however the specified channel value may not be valid as no channel is defined at that index even though the index may be less than the maximum allowed index. Such values should be considered to be untrusted, and validated before use. If we blindly use such values, we may access invalid data or crash if the values are corrupted. If validation fails, drop the relevant event. Signed-off-by: Jeffrey Hugo <jhugo@codeaurora.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Hemant Kumar <hemantk@codeaurora.org> Link: https://lore.kernel.org/r/1615411855-15053-1-git-send-email-jhugo@codeaurora.org Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2021-04-08extcon: qcom-spmi: Add support for VBUS detectionAnirudh Ghayal
VBUS can be detected via a dedicated PMIC pin. Add support for reporting the VBUS status. Signed-off-by: Anirudh Ghayal <aghayal@codeaurora.org> Signed-off-by: Kavya Nunna <knunna@codeaurora.org> Signed-off-by: Guru Das Srinagesh <gurus@codeaurora.org> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2021-04-08extcon: sm5502: Detect OTG when USB_ID is connected to groundNikita Travkin
In it's curent state this driver ignores OTG adapters with ID pin connected to ground. This commit adds a check to set extcon into host mode when such OTG adapter is connected. Signed-off-by: Nikita Travkin <nikitos.tr@gmail.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2021-04-08extcon: max8997: Add CHGINS and CHGRM interrupt handlingTimon Baetz
This allows the MAX8997 charger to set the current limit depending on the detected extcon charger type. Signed-off-by: Timon Baetz <timon.baetz@protonmail.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2021-04-07coresight: core: Fix typo in coresight-core.cQi Liu
Fix the following checkpatch warning: WARNING: 'compoment' may be misspelled - perhaps 'component'? Link: https://lore.kernel.org/r/1616487086-50418-1-git-send-email-liuqi115@huawei.com Signed-off-by: Qi Liu <liuqi115@huawei.com> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Link: https://lore.kernel.org/r/20210407160007.418053-4-mathieu.poirier@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-07coresight: etm: perf: Make symbol 'format_attr_contextid' staticWei Yongjun
The sparse tool complains as follows: drivers/hwtracing/coresight/coresight-etm-perf.c:61:25: warning: symbol 'format_attr_contextid' was not declared. Should it be static? This symbol is not used outside of coresight-etm-perf.c, so this commit marks it static. Link: https://lore.kernel.org/r/20210308123250.2417947-1-weiyongjun1@huawei.com Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Link: https://lore.kernel.org/r/20210407160007.418053-3-mathieu.poirier@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-07coresight: etm4x: Add ETM PID for Cortex-A78Sai Prakash Ranjan
Add ETM PID for Cortex-A78 to the list of supported ETMs. Link: https://lore.kernel.org/r/20210213112829.26834-1-saiprakash.ranjan@codeaurora.org Reviewed-by: Mike Leach <mike.leach@linaro.org> Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Link: https://lore.kernel.org/r/20210407160007.418053-2-mathieu.poirier@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-07Merge tag 'phy-for-5.13' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy into char-misc-next Vinod writes: phy-for-5.13 - Updates: - Yaml conversion for mvebu-utmi binding, bcm-ns-usb2 and bcm-ns-usb3 bindings - Mediatek dsi and hdmi phy updates - TI j721e-wiz updates for AM64 - Cadence-torrent phy updates for SGMII/QSGMII - New support: - usb3-dp phy for Qualcomm SM8250 - UTMI phy for Armada CP110 - USB phy for Qualcomm SC7280 - Binding and driver for Sparx5 ethernet serdes * tag 'phy-for-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (75 commits) phy: fix resource_size.cocci warnings phy: Sparx5 Eth SerDes: Use direct register operations phy: hisilicon: Use the correct HiSilicon copyright phy: marvell: phy-mvebu-cp11i-utmi needs USB_COMMON phy: qcom-qmp: add support for sm8250-usb3-dp phy phy: qcom-qmp: rename common registers phy: qcom-qmp: move DP functions to callbacks dt-bindings: phy: qcom,qmp-usb3-dp: Add support for SM8250 dt-bindings: phy: qcom,qmp-usb3-dp-phy: move usb3 compatibles back to qcom,qmp-phy.yaml phy: ti: j721e-wiz: Configure 'p_standard_mode' only for DP/QSGMII dt-bindings: phy: fix dt_binding_check warning in mediatek, ufs-phy.yaml phy: zynqmp: Handle the clock enable/disable properly dt-bindings: phy: bcm-ns-usb3-phy: convert to yaml dt-bindings: phy: bcm-ns-usb2-phy: convert to yaml phy: microchip: PHY_SPARX5_SERDES should depend on ARCH_SPARX5 phy: cadence-torrent: Add delay for PIPE clock to be stable phy: cadence-torrent: Explicitly request exclusive reset control phy: cadence-torrent: Do not configure SERDES if it's already configured phy: cadence-torrent: Group reset APIs and clock APIs phy: ti: j721e-wiz: Do not configure wiz if its already configured ...
2021-04-07Merge tag 'soundwire-5.13-rc1' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire into char-misc-next Vinod writes: soundwire updates for 5.13-rc1 Updates for v5.13-rc1 are: Core: - Ability to add quirks for masters - static checker cleanup for bus code Drivers: - DMI quirks for Intel controllers - static checker cleanup for drivers - add auto enumeration support qcom controller * tag 'soundwire-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire: (45 commits) soundwire: intel_init: test link->cdns soundwire: qcom: handle return correctly in qcom_swrm_transport_params soundwire: qcom: cleanup internal port config indexing soundwire: qcom: wait for fifo space to be available before read/write soundwire: qcom: add static port map support soundwire: qcom: update port map allocation bit mask soundwire: add static port mapping support soundwire: stream: fix memory leak in stream config error path soundwire: qcom: use signed variable for error return soundwire: qcom: wait for enumeration to be complete in probe soundwire: qcom: add auto enumeration support soundwire: export sdw_compare_devid, sdw_extract_slave_id and sdw_slave_add soundwire: qcom: add support to new interrupts soundwire: qcom: update register read/write routine soundwire: qcom: start the clock during initialization soundwire: qcom: set continue execution flag for ignored commands soundwire: qcom: add support to missing transport params dt-bindings: soundwire: qcom: clarify data port bus parameters soundwire: cadence: only prepare attached devices on clock stop soundwire: generic_allocation: fix confusion between group and packing ...
2021-04-07bus: mhi: pci_generic: Add FIREHOSE channelsLoic Poulain
When device enters flash programmer context (FP), it exposes firehose protocol through the EDL dedicated channels. Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/1617784860-32439-1-git-send-email-loic.poulain@linaro.org Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2021-04-07bus: mhi: pci_generic: Implement PCI shutdown callbackLoic Poulain
Deinit the device on shutdown to halt MHI/PCI operation on device side. This change fixes floating device state with some hosts that do not fully shutdown PCIe device when rebooting. Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/1616169037-7969-1-git-send-email-loic.poulain@linaro.org Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2021-04-07bus: mhi: core: Remove __ prefix for MHI channel unprepare functionBhaumik Bhatt
The __mhi_unprepare_channel() API does not require the __ prefix. Get rid of it and make the internal function consistent with the other function names. Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Hemant Kumar <hemantk@codeaurora.org> Link: https://lore.kernel.org/r/1617311778-1254-9-git-send-email-bbhatt@codeaurora.org Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2021-04-07bus: mhi: core: Check channel execution environment before issuing resetBhaumik Bhatt
A client can attempt to unprepare certain channels for transfer even after the execution environment they are supposed to run in has changed. In the event that happens, the device need not be notified of the reset and the host can proceed with clean up for the channel context and memory allocated for it on the host as the device will no longer be able to respond to such a request. Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org> Reviewed-by: Hemant Kumar <hemantk@codeaurora.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/1617311778-1254-8-git-send-email-bbhatt@codeaurora.org Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2021-04-07bus: mhi: core: Clear configuration from channel context during resetBhaumik Bhatt
When clearing up the channel context after client drivers are done using channels, the configuration is currently not being reset entirely. Ensure this is done to appropriately handle issues where clients unaware of the context state end up calling functions which expect a context. Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org> Reviewed-by: Hemant Kumar <hemantk@codeaurora.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/1617311778-1254-7-git-send-email-bbhatt@codeaurora.org Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2021-04-07bus: mhi: core: Hold device wake for channel update commandsBhaumik Bhatt
MHI host can fail early if device is in a bad state by attempting to assert device wake and holding the runtime PM vote before sending a channel update command instead of performing a wake toggle and waiting for a timeout if the send were to fail. This can help improve the design and enable shorter wait periods for device to respond as votes are already held. Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/1617311778-1254-6-git-send-email-bbhatt@codeaurora.org Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2021-04-07bus: mhi: core: Update debug messages to use client deviceBhaumik Bhatt
Debug messages dealing with client devices use the generic MHI controller or parent device along with a channel number. It would be better to instead use the client device directly and enable better log messages for channel updates. Suggested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/1617311778-1254-5-git-send-email-bbhatt@codeaurora.org Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2021-04-07bus: mhi: core: Improvements to the channel handling state machineBhaumik Bhatt
Improve the channel handling state machine such that all commands go through a common function and a validation process to ensure that the state machine is not violated in any way and adheres to the MHI specification. Using this common function allows MHI to eliminate some unnecessary debug messages and code duplication. Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/1617311778-1254-4-git-send-email-bbhatt@codeaurora.org Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2021-04-07bus: mhi: core: Clear context for stopped channels from remove()Bhaumik Bhatt
If a channel was explicitly stopped but not reset and a driver remove is issued, clean up the channel context such that it is reflected on the device. This move is useful if a client driver module is unloaded or a device crash occurs with the host having placed the channel in a stopped state. Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org> Reviewed-by: Hemant Kumar <hemantk@codeaurora.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/1617311778-1254-3-git-send-email-bbhatt@codeaurora.org Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2021-04-07bus: mhi: core: Allow sending the STOP channel commandBhaumik Bhatt
Add support to allow sending the STOP channel command. If a client driver would like to STOP a channel and have the device retain the channel context instead of issuing a RESET to it and clearing the context, this would provide support for it after the ability to send this command is exposed to clients. Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org> Reviewed-by: Hemant Kumar <hemantk@codeaurora.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/1617311778-1254-2-git-send-email-bbhatt@codeaurora.org Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2021-04-07bus: mhi: pci_generic: Add SDX65 based modem supportBhaumik Bhatt
Add generic info for SDX65 based modems. Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Loic Poulain <loic.poulain@linaro.org> Link: https://lore.kernel.org/r/1617399199-35172-1-git-send-email-bbhatt@codeaurora.org Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2021-04-07bus: mhi: core: Remove pre_init flag used for power purposesBhaumik Bhatt
Some controllers can choose to skip preparation for power up. In that case, device context is initialized based on the pre_init flag not being set during mhi_prepare_for_power_up(). There is no reason MHI host driver should maintain and provide controllers with two separate paths for preparing MHI. Going forward, all controllers will be required to call the mhi_prepare_for_power_up() API followed by their choice of sync or async power up. This allows MHI host driver to get rid of the pre_init flag and sets up a common way for all controllers to use MHI. This also helps controllers fail early on during preparation phase in some failure cases. Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org> Reviewed-by: Hemant Kumar <hemantk@codeaurora.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/1617313309-24035-1-git-send-email-bbhatt@codeaurora.org Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2021-04-07bus: mhi: pm: reduce PM state change verbosityLoic Poulain
Since M3 can be entered/exited quite a lot when used for runtime PM, keep the mhi suspend/resume transitions quiet. Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Reviewed-by: Bhaumik Bhatt <bbhatt@codeaurora.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/1617700315-12492-2-git-send-email-loic.poulain@linaro.org Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2021-04-07bus: mhi: core: Fix MHI runtime_pm behaviorLoic Poulain
This change ensures that PM reference is always get during packet queueing and released either after queuing completion (RX) or once the buffer has been consumed (TX). This guarantees proper update for underlying MHI controller runtime status (e.g. last_busy timestamp) and prevents suspend to be triggered while TX packets are flying, or before we completed update of the RX ring. Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/1617700315-12492-1-git-send-email-loic.poulain@linaro.org Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2021-04-06phy: fix resource_size.cocci warningskernel test robot
drivers/phy/microchip/sparx5_serdes.c:2440:54-57: ERROR: Missing resource_size with iores Use resource_size function on resource object instead of explicit computation. Generated by: scripts/coccinelle/api/resource_size.cocci Fixes: 2ff8a1eeb5aa ("phy: Add Sparx5 ethernet serdes PHY driver") CC: Steen Hegelund <steen.hegelund@microchip.com> Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/r/20210318232844.GA65886@63b0c5462fda Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-04-06phy: Sparx5 Eth SerDes: Use direct register operationsSteen Hegelund
Use direct register operations instead of a table of register information to lower the stack usage. Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com> Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/r/20210329141309.612459-2-steen.hegelund@microchip.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-04-06phy: hisilicon: Use the correct HiSilicon copyrightHao Fang
s/Hisilicon/HiSilicon/g. It should use capital S, according to the official website. Signed-off-by: Hao Fang <fanghao11@huawei.com> Link: https://lore.kernel.org/r/1617278537-26102-1-git-send-email-fanghao11@huawei.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-04-06phy: marvell: phy-mvebu-cp11i-utmi needs USB_COMMONRandy Dunlap
When USB and USB_COMMON are not enabled, phy-mvebu-cp110-utmi suffers a build error due to a missing interface that is provided by CONFIG_USB_COMMON, so make the driver depend on USB_COMMON. ld: drivers/phy/marvell/phy-mvebu-cp110-utmi.o: in function `mvebu_cp110_utmi_phy_probe': phy-mvebu-cp110-utmi.c:(.text+0x152): undefined reference to `of_usb_get_dr_mode_by_phy' Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Kostya Porotchkin <kostap@marvell.com> Cc: Kishon Vijay Abraham I <kishon@ti.com> Cc: Vinod Koul <vkoul@kernel.org> Cc: linux-phy@lists.infradead.org Link: https://lore.kernel.org/r/20210401210045.23525-1-rdunlap@infradead.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-04-06soundwire: intel_init: test link->cdnsBard Liao
intel_link_probe() could return error and dev_get_drvdata() will return null in such case. So we have to test link->cdns after link->cdns = dev_get_drvdata(&ldev->auxdev.dev); Otherwise, we will meet the "kernel NULL pointer dereference" error. Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Rander Wang <rander.wang@intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20210406010101.11442-1-yung-chuan.liao@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-04-06soundwire: qcom: handle return correctly in qcom_swrm_transport_paramsSrinivas Kandagatla
Looks like return from reg_write is set but not checked. Fix this by adding error return path. Reported-by: coverity-bot <keescook+coverity-bot@chromium.org> Addresses-Coverity-ID: 1503591 ("UNUSED_VALUE") Fixes: 128eaf937adb ("soundwire: qcom: add support to missing transport params") Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Reviewed-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20210401091502.15825-1-srinivas.kandagatla@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-04-06soundwire: qcom: cleanup internal port config indexingSrinivas Kandagatla
Internally used portconfig array for storing port bandwidth params starts from offset zero. However port zero is not really used and we also copy the bus parameters to offset zero. So basically we endup with a code which has to subtract 1 from port number to get to port parameters. This is bit confusing to the reader so, make this bit more obvious by only copying the parameters to offset 1 instead of zero. This will avoid doing -1 every time when we try to get port params. Similar thing has been recently done with din/dout_port_mask. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20210401092454.21299-1-srinivas.kandagatla@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-04-06soundwire: qcom: wait for fifo space to be available before read/writeSrinivas Kandagatla
If we write registers very fast we can endup in a situation where some of the writes will be dropped without any notice. So wait for the fifo space to be available before reading/writing the soundwire registers. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20210401090058.24041-1-srinivas.kandagatla@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-04-06soundwire: qcom: add static port map supportSrinivas Kandagatla
SoundWire device ports are statically mapped to Controller ports during design. Add support to read these from SoundWire devices. This controller uses static port map info to setup bandwidth parameters for those ports. A generic port allocation is not possible in this cases! Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20210315165650.13392-4-srinivas.kandagatla@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
generated by cgit (git 2.34.1) at 2025-09-20 04:25:03 +0000