summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2019-09-14Revert "vhost: block speculation of translated descriptors"Michael S. Tsirkin
This reverts commit a89db445fbd7f1f8457b03759aa7343fa530ef6b. I was hasty to include this patch, and it breaks the build on 32 bit. Defence in depth is good but let's do it properly. Cc: stable@vger.kernel.org Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-09-14Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds
Pull networking fixes from David Miller: 1) Don't corrupt xfrm_interface parms before validation, from Nicolas Dichtel. 2) Revert use of usb-wakeup in btusb, from Mario Limonciello. 3) Block ipv6 packets in bridge netfilter if ipv6 is disabled, from Leonardo Bras. 4) IPS_OFFLOAD not honored in ctnetlink, from Pablo Neira Ayuso. 5) Missing ULP check in sock_map, from John Fastabend. 6) Fix receive statistic handling in forcedeth, from Zhu Yanjun. 7) Fix length of SKB allocated in 6pack driver, from Christophe JAILLET. 8) ip6_route_info_create() returns an error pointer, not NULL. From Maciej Żenczykowski. 9) Only add RDS sock to the hashes after rs_transport is set, from Ka-Cheong Poon. 10) Don't double clean TX descriptors in ixgbe, from Ilya Maximets. 11) Presence of transmit IPSEC offload in an SKB is not tested for correctly in ixgbe and ixgbevf. From Steffen Klassert and Jeff Kirsher. 12) Need rcu_barrier() when register_netdevice() takes one of the notifier based failure paths, from Subash Abhinov Kasiviswanathan. 13) Fix leak in sctp_do_bind(), from Mao Wenan. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (72 commits) cdc_ether: fix rndis support for Mediatek based smartphones sctp: destroy bucket if failed to bind addr sctp: remove redundant assignment when call sctp_get_port_local sctp: change return type of sctp_get_port_local ixgbevf: Fix secpath usage for IPsec Tx offload sctp: Fix the link time qualifier of 'sctp_ctrlsock_exit()' ixgbe: Fix secpath usage for IPsec TX offload. net: qrtr: fix memort leak in qrtr_tun_write_iter net: Fix null de-reference of device refcount ipv6: Fix the link time qualifier of 'ping_v6_proc_exit_net()' tun: fix use-after-free when register netdev failed tcp: fix tcp_ecn_withdraw_cwr() to clear TCP_ECN_QUEUE_CWR ixgbe: fix double clean of Tx descriptors with xdp ixgbe: Prevent u8 wrapping of ITR value to something less than 10us mlx4: fix spelling mistake "veify" -> "verify" net: hns3: fix spelling mistake "undeflow" -> "underflow" net: lmc: fix spelling mistake "runnin" -> "running" NFC: st95hf: fix spelling mistake "receieve" -> "receive" net/rds: An rds_sock is added too early to the hash table mac80211: Do not send Layer 2 Update frame before authorization ...
2019-09-14Merge tag 'mmc-v5.3-rc8' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc Pull MMC fixes from Ulf Hansson: - tmio: Fixup runtime PM management during probe and remove - sdhci-pci-o2micro: Fix eMMC initialization for an AMD SoC - bcm2835: Prevent lockups when terminating work * tag 'mmc-v5.3-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: mmc: tmio: Fixup runtime PM management during remove mmc: tmio: Fixup runtime PM management during probe Revert "mmc: tmio: move runtime PM enablement to the driver implementations" Revert "mmc: sdhci: Remove unneeded quirk2 flag of O2 SD host controller" Revert "mmc: bcm2835: Terminate timeout work synchronously"
2019-09-14Merge tag 'drm-fixes-2019-09-13' of git://anongit.freedesktop.org/drm/drmLinus Torvalds
Pull drm fixes from Dave Airlie: "From the maintainer summit, just some last minute fixes for final: lima: - fix gem_wait ioctl core: - constify modes list i915: - DP MST high color depth regression - GPU hangs on vulkan compute workloads" * tag 'drm-fixes-2019-09-13' of git://anongit.freedesktop.org/drm/drm: drm/lima: fix lima_gem_wait() return value drm/i915: Restore relaxed padding (OCL_OOB_SUPPRES_ENABLE) for skl+ drm/i915: Limit MST to <= 8bpc once again drm/modes: Make the whitelist more const
2019-09-14Merge tag 'wireless-drivers-next-for-davem-2019-09-14' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== wireless-drivers-next patches for 5.4 Last set of patches for 5.4. wil6210 and rtw88 being most active this time, but ath9k also having a new module to load devices without EEPROM. Major changes: wil6210 * add support for Enhanced Directional Multi-Gigabit (EDMG) channels 9-11 * add debugfs file to show PCM ring content * report boottime_ns in scan results ath9k * add a separate loader for AR92XX (and older) pci(e) without eeprom brcmfmac * use the same wiphy after PCIe reset to not confuse the user space rtw88 * enable interrupt migration * enable AMSDU in AMPDU aggregation * report RX power for each antenna * enable to DPK and IQK calibration methods to improve performance ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-13of: Let of_for_each_phandle fallback to non-negative cell_countUwe Kleine-König
Referencing device tree nodes from a property allows to pass arguments. This is for example used for referencing gpios. This looks as follows: gpio_ctrl: gpio-controller { #gpio-cells = <2> ... } someothernode { gpios = <&gpio_ctrl 5 0 &gpio_ctrl 3 0>; ... } To know the number of arguments this must be either fixed, or the referenced node is checked for a $cells_name (here: "#gpio-cells") property and with this information the start of the second reference can be determined. Currently regulators are referenced with no additional arguments. To allow some optional arguments without having to change all referenced nodes this change introduces a way to specify a default cell_count. So when a phandle is parsed we check for the $cells_name property and use it as before if present. If it is not present we fall back to cells_count if non-negative and only fail if cells_count is smaller than zero. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Rob Herring <robh@kernel.org>
2019-09-13iommu: pass cell_count = -1 to of_for_each_phandle with cells_nameUwe Kleine-König
Currently of_for_each_phandle ignores the cell_count parameter when a cells_name is given. I intend to change that and let the iterator fall back to a non-negative cell_count if the cells_name property is missing in the referenced node. To not change how existing of_for_each_phandle's users iterate, fix them to pass cell_count = -1 when also cells_name is given which yields the expected behaviour with and without my change. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Rob Herring <robh@kernel.org>
2019-09-13dm bufio: introduce a global cache replacementMikulas Patocka
This commit introduces a global cache replacement (instead of per-client cleanup). If one bufio client uses the cache heavily and another client is not using it, we want to let the first client use most of the cache. The old algorithm would partition the cache equally betwen the clients and that is sub-optimal. For cache replacement, we use the clock algorithm because it doesn't require taking any lock when the buffer is accessed. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2019-09-13raid5: use bio_end_sector in r5_next_bioGuoqing Jiang
Actually, we calculate bio's end sector here, so use the common way for the purpose. Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com> Signed-off-by: Song Liu <songliubraving@fb.com>
2019-09-13raid5: remove STRIPE_OPS_REQ_PENDINGGuoqing Jiang
This stripe state is not used anymore after commit 51acbcec6c42b24 ("md: remove CONFIG_MULTICORE_RAID456"), so remove the obsoleted state. gjiang@nb01257:~/md$ grep STRIPE_OPS_REQ_PENDING drivers/md/ -r drivers/md/raid5.c: (1 << STRIPE_OPS_REQ_PENDING) | drivers/md/raid5.h: STRIPE_OPS_REQ_PENDING, Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com> Signed-off-by: Song Liu <songliubraving@fb.com>
2019-09-13net: devlink: move reload fail indication to devlink core and expose to userJiri Pirko
Currently the fact that devlink reload failed is stored in drivers. Move this flag into devlink core. Also, expose it to the user. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-13net: devlink: split reload op into twoJiri Pirko
In order to properly implement failure indication during reload, split the reload op into two ops, one for down phase and one for up phase. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-13mlx4: Split restart_one into two functionsJiri Pirko
Split the function restart_one into two functions and separate teardown and buildup. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-13md: add feature flag MD_FEATURE_RAID0_LAYOUTNeilBrown
Due to a bug introduced in Linux 3.14 we cannot determine the correctly layout for a multi-zone RAID0 array - there are two possibilities. It is possible to tell the kernel which to chose using a module parameter, but this can be clumsy to use. It would be best if the choice were recorded in the metadata. So add a feature flag for this purpose. If it is set, then the 'layout' field of the superblock is used to determine which layout to use. If this flag is not set, then mddev->layout gets set to -1, which causes the module parameter to be required. Acked-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com> Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: Song Liu <songliubraving@fb.com>
2019-09-13md/raid0: avoid RAID0 data corruption due to layout confusion.NeilBrown
If the drives in a RAID0 are not all the same size, the array is divided into zones. The first zone covers all drives, to the size of the smallest. The second zone covers all drives larger than the smallest, up to the size of the second smallest - etc. A change in Linux 3.14 unintentionally changed the layout for the second and subsequent zones. All the correct data is still stored, but each chunk may be assigned to a different device than in pre-3.14 kernels. This can lead to data corruption. It is not possible to determine what layout to use - it depends which kernel the data was written by. So we add a module parameter to allow the old (0) or new (1) layout to be specified, and refused to assemble an affected array if that parameter is not set. Fixes: 20d0189b1012 ("block: Introduce new bio_split()") cc: stable@vger.kernel.org (3.14+) Acked-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com> Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: Song Liu <songliubraving@fb.com>
2019-09-13raid5: don't set STRIPE_HANDLE to stripe which is in batch listGuoqing Jiang
If stripe in batch list is set with STRIPE_HANDLE flag, then the stripe could be set with STRIPE_ACTIVE by the handle_stripe function. And if error happens to the batch_head at the same time, break_stripe_batch_list is called, then below warning could happen (the same report in [1]), it means a member of batch list was set with STRIPE_ACTIVE. [7028915.431770] stripe state: 2001 [7028915.431815] ------------[ cut here ]------------ [7028915.431828] WARNING: CPU: 18 PID: 29089 at drivers/md/raid5.c:4614 break_stripe_batch_list+0x203/0x240 [raid456] [...] [7028915.431879] CPU: 18 PID: 29089 Comm: kworker/u82:5 Tainted: G O 4.14.86-1-storage #4.14.86-1.2~deb9 [7028915.431881] Hardware name: Supermicro SSG-2028R-ACR24L/X10DRH-iT, BIOS 3.1 06/18/2018 [7028915.431888] Workqueue: raid5wq raid5_do_work [raid456] [7028915.431890] task: ffff9ab0ef36d7c0 task.stack: ffffb72926f84000 [7028915.431896] RIP: 0010:break_stripe_batch_list+0x203/0x240 [raid456] [7028915.431898] RSP: 0018:ffffb72926f87ba8 EFLAGS: 00010286 [7028915.431900] RAX: 0000000000000012 RBX: ffff9aaa84a98000 RCX: 0000000000000000 [7028915.431901] RDX: 0000000000000000 RSI: ffff9ab2bfa15458 RDI: ffff9ab2bfa15458 [7028915.431902] RBP: ffff9aaa8fb4e900 R08: 0000000000000001 R09: 0000000000002eb4 [7028915.431903] R10: 00000000ffffffff R11: 0000000000000000 R12: ffff9ab1736f1b00 [7028915.431904] R13: 0000000000000000 R14: ffff9aaa8fb4e900 R15: 0000000000000001 [7028915.431906] FS: 0000000000000000(0000) GS:ffff9ab2bfa00000(0000) knlGS:0000000000000000 [7028915.431907] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [7028915.431908] CR2: 00007ff953b9f5d8 CR3: 0000000bf4009002 CR4: 00000000003606e0 [7028915.431909] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [7028915.431910] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [7028915.431910] Call Trace: [7028915.431923] handle_stripe+0x8e7/0x2020 [raid456] [7028915.431930] ? __wake_up_common_lock+0x89/0xc0 [7028915.431935] handle_active_stripes.isra.58+0x35f/0x560 [raid456] [7028915.431939] raid5_do_work+0xc6/0x1f0 [raid456] Also commit 59fc630b8b5f9f ("RAID5: batch adjacent full stripe write") said "If a stripe is added to batch list, then only the first stripe of the list should be put to handle_list and run handle_stripe." So don't set STRIPE_HANDLE to stripe which is already in batch list, otherwise the stripe could be put to handle_list and run handle_stripe, then the above warning could be triggered. [1]. https://www.spinics.net/lists/raid/msg62552.html Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com> Signed-off-by: Song Liu <songliubraving@fb.com>
2019-09-13raid5: don't increment read_errors on EILSEQ returnNigel Croxon
While MD continues to count read errors returned by the lower layer. If those errors are -EILSEQ, instead of -EIO, it should NOT increase the read_errors count. When RAID6 is set up on dm-integrity target that detects massive corruption, the leg will be ejected from the array. Even if the issue is correctable with a sector re-write and the array has necessary redundancy to correct it. The leg is ejected because it runs up the rdev->read_errors beyond conf->max_nr_stripes. The return status in dm-drypt when there is a data integrity error is -EILSEQ (BLK_STS_PROTECTION). Signed-off-by: Nigel Croxon <ncroxon@redhat.com> Signed-off-by: Song Liu <songliubraving@fb.com>
2019-09-13cdc_ether: fix rndis support for Mediatek based smartphonesBjørn Mork
A Mediatek based smartphone owner reports problems with USB tethering in Linux. The verbose USB listing shows a rndis_host interface pair (e0/01/03 + 10/00/00), but the driver fails to bind with [ 355.960428] usb 1-4: bad CDC descriptors The problem is a failsafe test intended to filter out ACM serial functions using the same 02/02/ff class/subclass/protocol as RNDIS. The serial functions are recognized by their non-zero bmCapabilities. No RNDIS function with non-zero bmCapabilities were known at the time this failsafe was added. But it turns out that some Wireless class RNDIS functions are using the bmCapabilities field. These functions are uniquely identified as RNDIS by their class/subclass/protocol, so the failing test can safely be disabled. The same applies to the two types of Misc class RNDIS functions. Applying the failsafe to Communication class functions only retains the original functionality, and fixes the problem for the Mediatek based smartphone. Tow examples of CDC functional descriptors with non-zero bmCapabilities from Wireless class RNDIS functions are: 0e8d:000a Mediatek Crosscall Spider X5 3G Phone CDC Header: bcdCDC 1.10 CDC ACM: bmCapabilities 0x0f connection notifications sends break line coding and serial state get/set/clear comm features CDC Union: bMasterInterface 0 bSlaveInterface 1 CDC Call Management: bmCapabilities 0x03 call management use DataInterface bDataInterface 1 and 19d2:1023 ZTE K4201-z CDC Header: bcdCDC 1.10 CDC ACM: bmCapabilities 0x02 line coding and serial state CDC Call Management: bmCapabilities 0x03 call management use DataInterface bDataInterface 1 CDC Union: bMasterInterface 0 bSlaveInterface 1 The Mediatek example is believed to apply to most smartphones with Mediatek firmware. The ZTE example is most likely also part of a larger family of devices/firmwares. Suggested-by: Lars Melin <larsm17@gmail.com> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-13IB/hfi1: Define variables as unsigned long to fix KASAN warningIra Weiny
Define the working variables to be unsigned long to be compatible with for_each_set_bit and change types as needed. While we are at it remove unused variables from a couple of functions. This was found because of the following KASAN warning: ================================================================== BUG: KASAN: stack-out-of-bounds in find_first_bit+0x19/0x70 Read of size 8 at addr ffff888362d778d0 by task kworker/u308:2/1889 CPU: 21 PID: 1889 Comm: kworker/u308:2 Tainted: G W 5.3.0-rc2-mm1+ #2 Hardware name: Intel Corporation W2600CR/W2600CR, BIOS SE5C600.86B.02.04.0003.102320141138 10/23/2014 Workqueue: ib-comp-unb-wq ib_cq_poll_work [ib_core] Call Trace: dump_stack+0x9a/0xf0 ? find_first_bit+0x19/0x70 print_address_description+0x6c/0x332 ? find_first_bit+0x19/0x70 ? find_first_bit+0x19/0x70 __kasan_report.cold.6+0x1a/0x3b ? find_first_bit+0x19/0x70 kasan_report+0xe/0x12 find_first_bit+0x19/0x70 pma_get_opa_portstatus+0x5cc/0xa80 [hfi1] ? ret_from_fork+0x3a/0x50 ? pma_get_opa_port_ectrs+0x200/0x200 [hfi1] ? stack_trace_consume_entry+0x80/0x80 hfi1_process_mad+0x39b/0x26c0 [hfi1] ? __lock_acquire+0x65e/0x21b0 ? clear_linkup_counters+0xb0/0xb0 [hfi1] ? check_chain_key+0x1d7/0x2e0 ? lock_downgrade+0x3a0/0x3a0 ? match_held_lock+0x2e/0x250 ib_mad_recv_done+0x698/0x15e0 [ib_core] ? clear_linkup_counters+0xb0/0xb0 [hfi1] ? ib_mad_send_done+0xc80/0xc80 [ib_core] ? mark_held_locks+0x79/0xa0 ? _raw_spin_unlock_irqrestore+0x44/0x60 ? rvt_poll_cq+0x1e1/0x340 [rdmavt] __ib_process_cq+0x97/0x100 [ib_core] ib_cq_poll_work+0x31/0xb0 [ib_core] process_one_work+0x4ee/0xa00 ? pwq_dec_nr_in_flight+0x110/0x110 ? do_raw_spin_lock+0x113/0x1d0 worker_thread+0x57/0x5a0 ? process_one_work+0xa00/0xa00 kthread+0x1bb/0x1e0 ? kthread_create_on_node+0xc0/0xc0 ret_from_fork+0x3a/0x50 The buggy address belongs to the page: page:ffffea000d8b5dc0 refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 flags: 0x17ffffc0000000() raw: 0017ffffc0000000 0000000000000000 ffffea000d8b5dc8 0000000000000000 raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000 page dumped because: kasan: bad access detected addr ffff888362d778d0 is located in stack of task kworker/u308:2/1889 at offset 32 in frame: pma_get_opa_portstatus+0x0/0xa80 [hfi1] this frame has 1 object: [32, 36) 'vl_select_mask' Memory state around the buggy address: ffff888362d77780: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff888362d77800: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >ffff888362d77880: 00 00 00 00 00 00 f1 f1 f1 f1 04 f2 f2 f2 00 00 ^ ffff888362d77900: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff888362d77980: 00 00 00 00 00 00 00 00 f1 f1 f1 f1 04 f2 f2 f2 ================================================================== Cc: <stable@vger.kernel.org> Fixes: 7724105686e7 ("IB/hfi1: add driver files") Link: https://lore.kernel.org/r/20190911113053.126040.47327.stgit@awfm-01.aw.intel.com Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Kaike Wan <kaike.wan@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-09-13IB/{rdmavt, hfi1, qib}: Add a counter for credit waitsKaike Wan
This patch adds a counter for credit waits to assist field debugging. Link: https://lore.kernel.org/r/20190911113047.126040.10857.stgit@awfm-01.aw.intel.com Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Kaike Wan <kaike.wan@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-09-13IB/hfi1: Add traces for TID RDMA READKaike Wan
This patch adds traces to debug packet loss and retry for TID RDMA READ protocol. Link: https://lore.kernel.org/r/20190911113041.126040.64541.stgit@awfm-01.aw.intel.com Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Kaike Wan <kaike.wan@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-09-13RDMA/siw: Relax from kmap_atomic() use in TX pathBernard Metzler
Since the transmit path is never executed in an atomic context, we do not need kmap_atomic() and can always use less demanding kmap(). Link: https://lore.kernel.org/r/20190909132945.30462-1-bmt@zurich.ibm.com Signed-off-by: Bernard Metzler <bmt@zurich.ibm.com> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-09-13Merge tag 'v5.3-rc8' into rdma.git for-nextJason Gunthorpe
To resolve dependencies in following patches mlx5_ib.h conflict resolved by keeing both hunks Linux 5.3-rc8 Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-09-13IB/iser: Support up to 16MB data transfer in a single commandSergey Gorenko
Maximum supported IO size is 8MB for the iSER driver. The current value is limited by the ISCSI_ISER_MAX_SG_TABLESIZE macro. But the driver is able to handle 16MB IOs without any significant changes. Increasing this limit can be useful for the storage arrays which are fine tuned for IOs larger than 8 MB. This commit allows to configure maximum IO size up to 16MB using the max_sectors module parameter. Link: https://lore.kernel.org/r/20190912103534.18210-1-sergeygo@mellanox.com Signed-off-by: Sergey Gorenko <sergeygo@mellanox.com> Reviewed-by: Max Gurtovoy <maxg@mellanox.com> Acked-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-09-13RDMA/siw: Fix page address mapping in TX pathBernard Metzler
Use the correct kmap()/kunmap() flow to determine page address used for CRC computation. Using page_address() is wrong, since page might be in highmem. Fixes: b9be6f18cf9e ("rdma/siw: transmit path") Link: https://lore.kernel.org/r/20190909132427.30264-1-bmt@zurich.ibm.com Reported-by: Krishnamraju Eraparaju <krishna2@chelsio.com> Signed-off-by: Bernard Metzler <bmt@zurich.ibm.com> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-09-13RDMA: Fix goto target to release the allocated memoryNavid Emamdoost
In bnxt_re_create_srq(), when ib_copy_to_udata() fails allocated memory should be released by goto fail. Fixes: 37cb11acf1f7 ("RDMA/bnxt_re: Add SRQ support for Broadcom adapters") Link: https://lore.kernel.org/r/20190910222120.16517-1-navid.emamdoost@gmail.com Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-09-13RDMA/usnic: Avoid overly large buffers on stackArnd Bergmann
It's never a good idea to put a 1000-byte buffer on the kernel stack. The compiler warns about this instance when usnic_ib_log_vf() gets inlined into usnic_ib_pci_probe(): drivers/infiniband/hw/usnic/usnic_ib_main.c:543:12: error: stack frame size of 1044 bytes in function 'usnic_ib_pci_probe' [-Werror,-Wframe-larger-than=] As this is only called for debugging purposes in the setup path, it's trivial to convert to a dynamic allocation. Link: https://lore.kernel.org/r/20190906155730.2750200-1-arnd@arndb.de Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-09-13RDMA/odp: Add missing cast for 32 bitJason Gunthorpe
length is a size_t which is unsigned int on 32 bit: ../drivers/infiniband/core/umem_odp.c: In function 'ib_init_umem_odp': ../include/linux/overflow.h:59:15: warning: comparison of distinct pointer types lacks a cast 59 | (void) (&__a == &__b); \ | ^~ ../drivers/infiniband/core/umem_odp.c:220:7: note: in expansion of macro 'check_add_overflow' Fixes: 204e3e5630c5 ("RDMA/odp: Check for overflow when computing the umem_odp end") Link: https://lore.kernel.org/r/20190908080726.30017-1-leon@kernel.org Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-09-13RDMA/hns: Use devm_platform_ioremap_resource() to simplify codeYueHaibing
Use devm_platform_ioremap_resource() to simplify the code a bit. This is detected by coccinelle. Link: https://lore.kernel.org/r/20190906141727.26552-1-yuehaibing@huawei.com Signed-off-by: YueHaibing <yuehaibing@huawei.com> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-09-13RDMA/cma: Fix false error messageHåkon Bugge
In addr_handler(), assuming status == 0 and the device already has been acquired (id_priv->cma_dev != NULL), we get the following incorrect "error" message: RDMA CM: ADDR_ERROR: failed to resolve IP. status 0 Fixes: 498683c6a7ee ("IB/cma: Add debug messages to error flows") Link: https://lore.kernel.org/r/20190902092731.1055757-1-haakon.bugge@oracle.com Signed-off-by: Håkon Bugge <haakon.bugge@oracle.com> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-09-13Merge ath-next from git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.gitKalle Valo
ath.git patches for 5.4. Major changes: wil6210 * add support for Enhanced Directional Multi-Gigabit (EDMG) channels 9-11 * add debugfs file to show PCM ring content * report boottime_ns in scan results ath9k * add a separate loader for AR92XX (and older) pci(e) without eeprom, enabled with the new ATH9K_PCI_NO_EEPROM Kconfig option
2019-09-13rtw88: report RX power for each antennaYan-Hsuan Chuang
Report chains and chain_signal in ieee80211_rx_status. It is useful for program such as tcpdump to see if the antennas are well connected/placed. 8822C is able to receive CCK rates with 2 antennas, while 8822B can only use 1 antenna path to receive CCK rates. Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Reviewed-by: Chris Chiu <chiu@endlessm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-13rtw88: fix wrong rx power calculationTsang-Shian Lin
Fix the wrong RF path for CCK rx power calculation. Fixes: e3037485c68e ("rtw88: new Realtek 802.11ac driver") Signed-off-by: Tsang-Shian Lin <thlin@realtek.com> Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Reviewed-by: Chris Chiu <chiu@endlessm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-13rtlwifi: rtl8192de: replace _rtl92d_evm_db_to_percentage with generic versionMichael Straube
Function _rtl92d_evm_db_to_percentage is functionally identical to the generic version rtl_evm_db_to_percentage, so remove _rtl92d_evm_db_to_percentage and use the generic version instead. Signed-off-by: Michael Straube <straube.linux@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-13rtlwifi: rtl8192cu: replace _rtl92c_evm_db_to_percentage with generic versionMichael Straube
Function _rtl92c_evm_db_to_percentage is functionally identical to the generic version rtl_evm_db_to_percentage, so remove _rtl92c_evm_db_to_percentage and use the generic version instead. Signed-off-by: Michael Straube <straube.linux@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-13rtlwifi: rtl8192ce: replace _rtl92c_evm_db_to_percentage with generic versionMichael Straube
Function _rtl92c_evm_db_to_percentage is functionally identical to the generic version rtl_evm_db_to_percentage, so remove _rtl92c_evm_db_to_percentage and use the generic version instead. Signed-off-by: Michael Straube <straube.linux@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-13rtw88: allows to receive AMSDU in AMPDUYan-Hsuan Chuang
The hardware has enough buffer to receive like 8K for an MPDU. So tell mac80211 that we can receive AMSDU in AMPDU. Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-13rtw88: add dynamic cck pd mechanismTzu-En Huang
This mechanism reduces the numbers of false alram in cck rate by dynamically adjusting the value of power threshold and cs_ratio. We determine the new value by three factors, which are rssi, false alarm count and igi. Based on these factors, we define the current condition into five levels. Compared to the previous level, if the level is changed, we set the new values for power threshold and cs_ratio. Signed-off-by: Tzu-En Huang <tehuang@realtek.com> Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-13rtw88: move IQK/DPK into phy_calibrationYan-Hsuan Chuang
Since 8822c requires to do not only IQK, but also DPK. Move these calibrations that need to be done once the channel is determined, into phy_calibration. And note that the order of the calibrations matters, 8822c should do IQK first, then DPK. Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-13rtw88: 8822c: add SW DPK supportTzu-En Huang
Power amplifiers are not linear components, and require DPK to reduce its nonlinearity. DPK is called Digital Pre-distortion Calibration, can be used to compensate the output of power. DPK tracking is in charge of tracking the thermal changes. And it then shifts the power curve accordingly, which makes the power output remains linear even if the PA works in different temperature. To perform DPK, the parameter table should also be updated. And the table will be applied when device is powered on. Then DPK will reference the values to calibrate. Signed-off-by: Tzu-En Huang <tehuang@realtek.com> Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-13rtw88: 8822c: add FW IQK supportYan-Hsuan Chuang
Add support for doing IQK in firmware Ideally the RF component's I/Q vectors should be orthogonal, but usually they are not. So we need to calibrate for the RF components, ex. PA/LNA, ADC/DAC. And if the I/Q vectors are more orthogonal, the mixed signal will have less deviation. This helps with those rates with higher modulation (MCS8-9), because they have more strict EVM/SNR requirement. Also the better of the quality of the signal, the longer it can propagate, and the better throughput performance we can get. Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-13rtw88: 8822c: Enable interrupt migrationTsang-Shian Lin
Enable 8822C Tx/Rx interrupt migration. In some platforms, performance test may cause heavy cpu loading and get bad results. Interrupt migration can decrease the amount of interrupts, and lower cpu loading. Signed-off-by: Tsang-Shian Lin <thlin@realtek.com> Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-13rtw88: 8822c: update pwr_seq to v13Chin-Yen Lee
update sequence to v13 to reduce power consumption when MAC power off Signed-off-by: Chin-Yen Lee <timlee@realtek.com> Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-13rtw88: 8822c: update PHY parameter to v38Yan-Hsuan Chuang
Update PHY hardware parameters to v38. Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-13rtlwifi: rtl8188ee: rtl8192ce: rtl8192de: rtl8723ae: rtl8821ae: Remove some ↵Larry Finger
unused bit manipulation macros Each of these drivers defines some device to host macros that are never used, thus they can be removed. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-13rtlwifi: rtl8723be: Convert inline routines to little-endian wordsLarry Finger
In this step, the read/write routines for the descriptors are converted to use __le32 quantities, thus a lot of casts can be removed. Callback routines still use the 8-bit arrays, but these are changed within the specified routine. The macro that cleared a descriptor has now been converted into an inline routine. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-13rtlwifi: rtl8723be: Convert macros that set descriptorLarry Finger
As a first step in the conversion, the macros that set the RX and TX descriptors are converted to static inline routines, and the names are changed from upper to lower case. To minimize the changes in a given step, the input descriptor information is left as as a byte array (u8 *), even though it should be a little-endian word array (__le32 *). That will be changed in the next patch. Several places where checkpatch.pl complains about a space after a cast are fixed. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-13rtlwifi: rtl8723be: Replace local bit manipulation macrosLarry Finger
This driver uses a set of local macros to manipulate the RX and TX descriptors, which are all little-endian quantities. These macros are replaced by the bitfield macros le32p_replace_bits() and le32_get_bits(). In several places, the macros operated on an entire 32-bit word. In these cases, a direct read or replacement is used. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-13rtlwifi: rtl8723be: Remove unused SET_XXX and GET_XXX macrosLarry Finger
iAs the first step in converting from macros that get/set information in the RX and TX descriptors, unused macros are being removed. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-13rtlwifi: rtl8723ae: Convert inline routines to little-endian wordsLarry Finger
In this step, the read/write routines for the descriptors are converted to use __le32 quantities, thus a lot of casts can be removed. Callback routines still use the 8-bit arrays, but these are changed within the specified routine. The macro that cleared a descriptor has now been converted into an inline routine. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
generated by cgit (git 2.34.1) at 2025-09-15 23:39:16 +0000