summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2021-12-13iavf: do not override the adapter state in the watchdog task (again)Stefan Assmann
The watchdog task incorrectly changes the state to __IAVF_RESETTING, instead of letting the reset task take care of that. This was already resolved by commit 22c8fd71d3a5 ("iavf: do not override the adapter state in the watchdog task") but the problem was reintroduced by the recent code refactoring in commit 45eebd62999d ("iavf: Refactor iavf state machine tracking"). Fixes: 45eebd62999d ("iavf: Refactor iavf state machine tracking") Signed-off-by: Stefan Assmann <sassmann@kpanic.de> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-12-13iavf: missing unlocks in iavf_watchdog_task()Dan Carpenter
This code was re-organized and there some unlocks missing now. Fixes: 898ef1cb1cb2 ("iavf: Combine init and watchdog state machines") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-12-13net: stmmac: Add GFP_DMA32 for rx buffers if no 64 capabilityDavid Wu
Use page_pool_alloc_pages instead of page_pool_dev_alloc_pages, which can give the gfp parameter, in the case of not supporting 64-bit width, using 32-bit address memory can reduce a copy from swiotlb. Signed-off-by: David Wu <david.wu@rock-chips.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-13net: phy: add a note about refcountingRussell King (Oracle)
Recently, a patch has been submitted to "fix" the refcounting for a DT node in of_mdiobus_link_mdiodev(). This is not a leaked refcount. The refcount is passed to the new device. Sadly, coccicheck identifies this location as a leaked refcount, which means we're likely to keep getting patches to "fix" this. However, fixing this will cause breakage. Add a comment to state that the lack of of_node_put() here is intentional. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-13net: ethernet: ti: add missing of_node_put before returnWang Qing
Fix following coccicheck warning: WARNING: Function "for_each_child_of_node" should have of_node_put() before return. Early exits from for_each_child_of_node should decrement the node reference counter. Signed-off-by: Wang Qing <wangqing@vivo.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-13net: dsa: mv88e6xxx: Unforce speed & duplex in mac_link_down()Marek Behún
Commit 64d47d50be7a ("net: dsa: mv88e6xxx: configure interface settings in mac_config") removed forcing of speed and duplex from mv88e6xxx_mac_config(), where the link is forced down, and left it only in mv88e6xxx_mac_link_up(), by which time link is unforced. It seems that (at least on 88E6190) when changing cmode to 2500base-x, if the link is not forced down, but the speed or duplex are still forced, the forcing of new settings for speed & duplex doesn't take in mv88e6xxx_mac_link_up(). Fix this by unforcing speed & duplex in mv88e6xxx_mac_link_down(). Fixes: 64d47d50be7a ("net: dsa: mv88e6xxx: configure interface settings in mac_config") Signed-off-by: Marek Behún <kabel@kernel.org> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-13net: bcmgenet: Fix NULL vs IS_ERR() checkingMiaoqian Lin
The phy_attach() function does not return NULL. It returns error pointers. Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-13usb: cdnsp: Fix incorrect status for control requestPawel Laszczak
Patch fixes incorrect status for control request. Without this fix all usb_request objects were returned to upper drivers with usb_reqest->status field set to -EINPROGRESS. Fixes: 3d82904559f4 ("usb: cdnsp: cdns3 Add main part of Cadence USBSSP DRD Driver") cc: <stable@vger.kernel.org> Reported-by: Ken (Jian) He <jianhe@ambarella.com> Reviewed-by: Peter Chen <peter.chen@kernel.org> Signed-off-by: Pawel Laszczak <pawell@cadence.com> Link: https://lore.kernel.org/r/20211207091838.39572-1-pawell@gli-login.cadence.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-13usb: cdnsp: Fix issue in cdnsp_log_ep trace eventPawel Laszczak
Patch fixes incorrect order of __entry->stream_id and __entry->state parameters in TP_printk macro. Fixes: 3d82904559f4 ("usb: cdnsp: cdns3 Add main part of Cadence USBSSP DRD Driver") cc: <stable@vger.kernel.org> Reviewed-by: Peter Chen <peter.chen@kernel.org> Signed-off-by: Pawel Laszczak <pawell@cadence.com> Link: https://lore.kernel.org/r/20211213050609.22640-1-pawell@gli-login.cadence.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-13usb: cdnsp: Fix incorrect calling of cdnsp_died functionPawel Laszczak
Patch restrict calling of cdnsp_died function during removing modules or software disconnect. This function was called because after transition controller to HALT state the driver starts handling the deferred interrupt. In this case such interrupt can be simple ignored. Fixes: 3d82904559f4 ("usb: cdnsp: cdns3 Add main part of Cadence USBSSP DRD Driver") cc: <stable@vger.kernel.org> Reviewed-by: Peter Chen <peter.chen@kernel.org> Signed-off-by: Pawel Laszczak <pawell@cadence.com> Link: https://lore.kernel.org/r/20211210112945.660-1-pawell@gli-login.cadence.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-13usb: xhci-mtk: fix list_del warning when enable list debugChunfeng Yun
There is warning of 'list_del corruption' when enable list debug (CONFIG_DEBUG_LIST=y), fix it by using list_del_init() Fixes: 4ce186665e7c ("usb: xhci-mtk: Do not use xhci's virt_dev in drop_endpoint") Cc: stable <stable@vger.kernel.org> Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/20211209025422.17108-1-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-13usb: gadget: u_ether: fix race in setting MAC address in setup phaseMarian Postevca
When listening for notifications through netlink of a new interface being registered, sporadically, it is possible for the MAC to be read as zero. The zero MAC address lasts a short period of time and then switches to a valid random MAC address. This causes problems for netd in Android, which assumes that the interface is malfunctioning and will not use it. In the good case we get this log: InterfaceController::getCfg() ifName usb0 hwAddr 92:a8:f0:73:79:5b ipv4Addr 0.0.0.0 flags 0x1002 In the error case we get these logs: InterfaceController::getCfg() ifName usb0 hwAddr 00:00:00:00:00:00 ipv4Addr 0.0.0.0 flags 0x1002 netd : interfaceGetCfg("usb0") netd : interfaceSetCfg() -> ServiceSpecificException (99, "[Cannot assign requested address] : ioctl() failed") The reason for the issue is the order in which the interface is setup, it is first registered through register_netdev() and after the MAC address is set. Fixed by first setting the MAC address of the net_device and after that calling register_netdev(). Fixes: bcd4a1c40bee885e ("usb: gadget: u_ether: construct with default values and add setters/getters") Cc: stable@vger.kernel.org Signed-off-by: Marian Postevca <posteuca@mutex.one> Link: https://lore.kernel.org/r/20211204214912.17627-1-posteuca@mutex.one Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-13firmware: arm_scpi: Fix string overflow in SCPI genpd driverSudeep Holla
Without the bound checks for scpi_pd->name, it could result in the buffer overflow when copying the SCPI device name from the corresponding device tree node as the name string is set at maximum size of 30. Let us fix it by using devm_kasprintf so that the string buffer is allocated dynamically. Fixes: 8bec4337ad40 ("firmware: scpi: add device power domain support using genpd") Reported-by: Pedro Batista <pedbap.g@gmail.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Cc: stable@vger.kernel.org Cc: Cristian Marussi <cristian.marussi@arm.com> Link: https://lore.kernel.org/r/20211209120456.696879-1-sudeep.holla@arm.com' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-12-13Merge tag 'imx-fixes-5.16-2' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes i.MX fixes for 5.16, round 2: - One fix on imx8m-blk-ctrl driver to get i.MX8MM MIPI reset work properly - Fix CSI_DATA07__ESAI_TX0 pad name in i.MX7ULL pin function header - Remove interconnect property from i.MX8MQ LCDIF device to fix the regression that LCDIF driver stops probe, because interconnect provider driver (imx-bus) hasn't been fully working. - Fix soc-imx driver to register SoC device only on i.MX platform. * tag 'imx-fixes-5.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: soc: imx: Register SoC device only on i.MX boards soc: imx: imx8m-blk-ctrl: Fix imx8mm mipi reset ARM: dts: imx6ull-pinfunc: Fix CSI_DATA07__ESAI_TX0 pad name arm64: dts: imx8mq: remove interconnect property from lcdif Link: https://lore.kernel.org/r/20211211015625.GK4216@dragon Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-12-13Merge tag 'tegra-for-5.16-firmware-fixes' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/fixes firmware: Fixes for v5.16-rc5 This contains a single fix for an incorrect usage of sizeof(). * tag 'tegra-for-5.16-firmware-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: firmware: tegra: Fix error application of sizeof() to pointer Link: https://lore.kernel.org/r/20211207162115.450554-1-thierry.reding@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-12-13Merge tag 'amdtee-fix-for-v5.16' of ↵Arnd Bergmann
git://git.linaro.org/people/jens.wiklander/linux-tee into arm/fixes AMD-TEE fix IS_ERR() bug * tag 'amdtee-fix-for-v5.16' of git://git.linaro.org/people/jens.wiklander/linux-tee: tee: amdtee: fix an IS_ERR() vs NULL bug Link: https://lore.kernel.org/r/20211130070351.GA2308099@jade Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-12-13Merge tag 'reset-fixes-for-v5.16' of git://git.pengutronix.de/pza/linux into ↵Arnd Bergmann
arm/fixes Reset controller fixes for v5.16 Well, just one: revert commit c045ceb5a145 ("reset: tegra-bpmp: Handle errors in BPMP response"), which exposed an issue with the Tegra194 HDA controller reset. BPMP response error handling will be reinstated once there's a fix for the HDA issue. * tag 'reset-fixes-for-v5.16' of git://git.pengutronix.de/pza/linux: reset: tegra-bpmp: Revert Handle errors in BPMP response Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-12-13drm/mediatek: hdmi: Perform NULL pointer check for mtk_hdmi_confAngeloGioacchino Del Regno
In commit 41ca9caaae0b ("drm/mediatek: hdmi: Add check for CEA modes only") a check for CEA modes was added to function mtk_hdmi_bridge_mode_valid() in order to address possible issues on MT8167; moreover, with commit c91026a938c2 ("drm/mediatek: hdmi: Add optional limit on maximal HDMI mode clock") another similar check was introduced. Unfortunately though, at the time of writing, MT8173 does not provide any mtk_hdmi_conf structure and this is crashing the kernel with NULL pointer upon entering mtk_hdmi_bridge_mode_valid(), which happens as soon as a HDMI cable gets plugged in. To fix this regression, add a NULL pointer check for hdmi->conf in the said function, restoring HDMI functionality and avoiding NULL pointer kernel panics. Fixes: 41ca9caaae0b ("drm/mediatek: hdmi: Add check for CEA modes only") Fixes: c91026a938c2 ("drm/mediatek: hdmi: Add optional limit on maximal HDMI mode clock") Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
2021-12-13drm: simpledrm: fix wrong unit with pixel clockAlejandro Concepcion-Rodriguez
Pixel clock has to be set in kHz. Signed-off-by: Alejandro Concepcion-Rodriguez <asconcepcion@acoro.eu> Fixes: 11e8f5fd223b ("drm: Add simpledrm driver") Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/6f8554ef-1305-0dda-821c-f7d2e5644a48@acoro.eu
2021-12-13dmaengine: st_fdma: fix MODULE_ALIASAlyssa Ross
modprobe can't handle spaces in aliases. Fixes: 6b4cd727eaf1 ("dmaengine: st_fdma: Add STMicroelectronics FDMA engine driver support") Signed-off-by: Alyssa Ross <hi@alyssa.is> Link: https://lore.kernel.org/r/20211125154441.2626214-1-hi@alyssa.is Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-12-13dmaengine: idxd: fix missed completion on abort pathDave Jiang
Ming reported that with the abort path of the descriptor submission, there can be a window where a completed descriptor can be missed to be completed by the irq completion thread: CPU A CPU B Submit (successful) Submit (fail) irq_process_work_list() // empty llist_abort_desc() // remove all descs from pending list irq_process_pending_llist() // empty exit idxd_wq_thread() with no processing Add opportunistic descriptor completion in the abort path in order to remove the missed completion. Fixes: 6b4b87f2c31a ("dmaengine: idxd: fix submission race window") Reported-by: Ming Li <ming4.li@intel.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/163898288714.443911.16084982766671976640.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-12-13dmaengine: ti: k3-udma: Fix smatch warningsVignesh Raghavendra
Smatch reports below warnings [1] wrt dereferencing rm_res when it can potentially be ERR_PTR(). This is possible when entire range is allocated to Linux Fix this case by making sure, there is no deference of rm_res when its ERR_PTR(). [1]: drivers/dma/ti/k3-udma.c:4524 udma_setup_resources() error: 'rm_res' dereferencing possible ERR_PTR() drivers/dma/ti/k3-udma.c:4537 udma_setup_resources() error: 'rm_res' dereferencing possible ERR_PTR() drivers/dma/ti/k3-udma.c:4681 bcdma_setup_resources() error: 'rm_res' dereferencing possible ERR_PTR() drivers/dma/ti/k3-udma.c:4696 bcdma_setup_resources() error: 'rm_res' dereferencing possible ERR_PTR() drivers/dma/ti/k3-udma.c:4711 bcdma_setup_resources() error: 'rm_res' dereferencing possible ERR_PTR() drivers/dma/ti/k3-udma.c:4848 pktdma_setup_resources() error: 'rm_res' dereferencing possible ERR_PTR() drivers/dma/ti/k3-udma.c:4861 pktdma_setup_resources() error: 'rm_res' dereferencing possible ERR_PTR() Reported-by: Nishanth Menon <nm@ti.com> Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com> Link: https://lore.kernel.org/r/20211209180957.29036-1-vigneshr@ti.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-12-12Input: atmel_mxt_ts - fix double free in mxt_read_info_blockJosé Expósito
The "id_buf" buffer is stored in "data->raw_info_block" and freed by "mxt_free_object_table" in case of error. Return instead of jumping to avoid a double free. Addresses-Coverity-ID: 1474582 ("Double free") Fixes: 068bdb67ef74 ("Input: atmel_mxt_ts - fix the firmware update") Signed-off-by: José Expósito <jose.exposito89@gmail.com> Link: https://lore.kernel.org/r/20211212194257.68879-1-jose.exposito89@gmail.com Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-12-12hwmon: (lm90) Do not report 'busy' status bit as alarmGuenter Roeck
Bit 7 of the status register indicates that the chip is busy doing a conversion. It does not indicate an alarm status. Stop reporting it as alarm status bit. Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-12-12hwmom: (lm90) Fix citical alarm status for MAX6680/MAX6681Guenter Roeck
Tests with a real chip and a closer look into the datasheet reveals that the local and remote critical alarm status bits are swapped for MAX6680/MAX6681. Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-12-12hwmon: (lm90) Drop critical attribute support for MAX6654Guenter Roeck
Tests with a real chip and a closer look into the datasheet show that MAX6654 does not support CRIT/THERM/OVERTEMP limits, so drop support of the respective attributes for this chip. Introduce LM90_HAVE_CRIT flag and use it to instantiate critical limit attributes to solve the problem. Cc: Josh Lehan <krellan@google.com> Fixes: 229d495d8189 ("hwmon: (lm90) Add max6654 support to lm90 driver") Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-12-12hwmon: (lm90) Prevent integer overflow/underflow in hysteresis calculationsGuenter Roeck
Commit b50aa49638c7 ("hwmon: (lm90) Prevent integer underflows of temperature calculations") addressed a number of underflow situations when writing temperature limits. However, it missed one situation, seen when an attempt is made to set the hysteresis value to MAX_LONG and the critical temperature limit is negative. Use clamp_val() when setting the hysteresis temperature to ensure that the provided value can never overflow or underflow. Fixes: b50aa49638c7 ("hwmon: (lm90) Prevent integer underflows of temperature calculations") Cc: Dmitry Osipenko <digetx@gmail.com> Reviewed-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-12-12hwmon: (lm90) Fix usage of CONFIG2 register in detect functionGuenter Roeck
The detect function had a comment "Make compiler happy" when id did not read the second configuration register. As it turns out, the code was checking the contents of this register for manufacturer ID 0xA1 (NXP Semiconductor/Philips), but never actually read the register. So it wasn't surprising that the compiler complained, and it indeed had a point. Fix the code to read the register contents for manufacturer ID 0xa1. At the same time, the code was reading the register for manufacturer ID 0x41 (Analog Devices), but it was not using the results. In effect it was just checking if reading the register returned an error. That doesn't really add much if any value, so stop doing that. Fixes: f90be42fb383 ("hwmon: (lm90) Refactor reading of config2 register") Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-12-12Merge tag 'usb-5.16-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg KH: "Here are some small USB fixes for 5.16-rc5. They include: - gadget driver fixes for reported issues - xhci fixes for reported problems. - config endpoint parsing fixes for where we got bitfields wrong Most of these have been in linux-next, the remaining few were not, but got lots of local testing in my systems and in some cloud testing infrastructures" * tag 'usb-5.16-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: usb: core: config: using bit mask instead of individual bits usb: core: config: fix validation of wMaxPacketValue entries USB: gadget: zero allocate endpoint 0 buffers USB: gadget: detect too-big endpoint 0 requests xhci: avoid race between disable slot command and host runtime suspend xhci: Remove CONFIG_USB_DEFAULT_PERSIST to prevent xHCI from runtime suspending Revert "usb: dwc3: dwc3-qcom: Enable tx-fifo-resize property by default"
2021-12-12Merge tag 'char-misc-5.16-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver fixes from Greg KH: "Here are a bunch of small char/misc and other driver subsystem fixes. Included in here are: - iio driver fixes for reported problems - phy driver fixes for a number of reported problems - mhi resume bugfix for broken hardware - nvmem driver fix - rtsx driver fix for irq issues - fastrpc packet parsing fix All of these have been in linux-next for a while with no reported issues" * tag 'char-misc-5.16-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (33 commits) bus: mhi: core: Add support for forced PM resume iio: trigger: stm32-timer: fix MODULE_ALIAS misc: rtsx: Avoid mangling IRQ during runtime PM nvmem: eeprom: at25: fix FRAM byte_len misc: fastrpc: fix improper packet size calculation MAINTAINERS: add maintainer for Qualcomm FastRPC driver bus: mhi: pci_generic: Fix device recovery failed issue iio: adc: stm32: fix null pointer on defer_probe error phy: HiSilicon: Fix copy and paste bug in error handling dt-bindings: phy: zynqmp-psgtr: fix USB phy name phy: ti: omap-usb2: Fix the kernel-doc style phy: qualcomm: ipq806x-usb: Fix kernel-doc style iio: at91-sama5d2: Fix incorrect sign extension iio: adc: axp20x_adc: fix charging current reporting on AXP22x iio: gyro: adxrs290: fix data signedness phy: ti: tusb1210: Fix the kernel-doc warn phy: qualcomm: usb-hsic: Fix the kernel-doc warn phy: qualcomm: qmp: Add missing struct documentation phy: mvebu-cp110-utmi: Fix kernel-doc warns iio: ad7768-1: Call iio_trigger_notify_done() on error ...
2021-12-12Merge tag 'timers-urgent-2021-12-12' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer fixes from Thomas Gleixner: "Two fixes for clock chip drivers: - A regression fix for the Designware APB timer. A recent change to the error checking code transformed the error condition wrongly so it turned into a fail if good condition. - Fix a clang build fail of the ARM architected timer driver" * tag 'timers-urgent-2021-12-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: clocksource/drivers/arm_arch_timer: Force inlining of erratum_set_next_event_generic() clocksource/drivers/dw_apb_timer_of: Fix probe failure
2021-12-12Merge tag 'irq-urgent-2021-12-12' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fixes from Thomas Gleixner: "A set of interrupt chip driver fixes: - Fix the multi vector MSI allocation on Armada 370XP - Do interrupt acknowledgement correctly in the aspeed-scu driver - Make the IPR register offset correct in the NVIC driver - Make redistribution table flushing correct by issueing a SYNC command to ensure that the invalidation command has been executed - Plug a device tree node reference leak in the bcm7210-l2 driver - Trivial fixes in the MIPS GIC and the Apple AIC drivers" * tag 'irq-urgent-2021-12-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/irq-bcm7120-l2: Add put_device() after of_find_device_by_node() irqchip/irq-gic-v3-its.c: Force synchronisation when issuing INVALL irqchip/apple-aic: Mark aic_init_smp() as __init irqchip: nvic: Fix offset for Interrupt Priority Offsets irqchip/mips-gic: Use bitfield helpers irqchip/aspeed-scu: Replace update_bits with write_bits. irqchip/armada-370-xp: Fix support for Multi-MSI interrupts irqchip/armada-370-xp: Fix return value of armada_370_xp_msi_alloc()
2021-12-12net: hns3: fix race condition in debugfsYufeng Mo
When multiple threads concurrently access the debugfs content, data and pointer exceptions may occur. Therefore, mutex lock protection is added for debugfs. Fixes: 5e69ea7ee2a6 ("net: hns3: refactor the debugfs process") Signed-off-by: Yufeng Mo <moyufeng@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-12net: hns3: fix use-after-free bug in hclgevf_send_mbx_msgJie Wang
Currently, the hns3_remove function firstly uninstall client instance, and then uninstall acceletion engine device. The netdevice is freed in client instance uninstall process, but acceletion engine device uninstall process still use it to trace runtime information. This causes a use after free problem. So fixes it by check the instance register state to avoid use after free. Fixes: d8355240cf8f ("net: hns3: add trace event support for PF/VF mailbox") Signed-off-by: Jie Wang <wangjie125@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-12usb: core: config: using bit mask instead of individual bitsPavel Hofman
Using standard USB_EP_MAXP_MULT_MASK instead of individual bits for extracting multiple-transactions bits from wMaxPacketSize value. Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Pavel Hofman <pavel.hofman@ivitera.com> Link: https://lore.kernel.org/r/20211210085219.16796-2-pavel.hofman@ivitera.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-12usb: core: config: fix validation of wMaxPacketValue entriesPavel Hofman
The checks performed by commit aed9d65ac327 ("USB: validate wMaxPacketValue entries in endpoint descriptors") require that initial value of the maxp variable contains both maximum packet size bits (10..0) and multiple-transactions bits (12..11). However, the existing code assings only the maximum packet size bits. This patch assigns all bits of wMaxPacketSize to the variable. Fixes: aed9d65ac327 ("USB: validate wMaxPacketValue entries in endpoint descriptors") Cc: stable <stable@vger.kernel.org> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Pavel Hofman <pavel.hofman@ivitera.com> Link: https://lore.kernel.org/r/20211210085219.16796-1-pavel.hofman@ivitera.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-12USB: gadget: zero allocate endpoint 0 buffersGreg Kroah-Hartman
Under some conditions, USB gadget devices can show allocated buffer contents to a host. Fix this up by zero-allocating them so that any extra data will all just be zeros. Reported-by: Szymon Heidrich <szymon.heidrich@gmail.com> Tested-by: Szymon Heidrich <szymon.heidrich@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-12USB: gadget: detect too-big endpoint 0 requestsGreg Kroah-Hartman
Sometimes USB hosts can ask for buffers that are too large from endpoint 0, which should not be allowed. If this happens for OUT requests, stall the endpoint, but for IN requests, trim the request size to the endpoint buffer size. Co-developed-by: Szymon Heidrich <szymon.heidrich@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-11Merge tag 'scsi-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "Four fixes, all in drivers. Three are small and obvious, the qedi one is a bit larger but also pretty obvious" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: qla2xxx: Format log strings only if needed scsi: scsi_debug: Fix buffer size of REPORT ZONES command scsi: qedi: Fix cmd_cleanup_cmpl counter mismatch issue scsi: pm80xx: Do not call scsi_remove_host() in pm8001_alloc()
2021-12-11Merge tag 'block-5.16-2021-12-10' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block fixes from Jens Axboe: "A few block fixes that should go into this release: - NVMe pull request: - set ana_log_size to 0 after freeing ana_log_buf (Hou Tao) - show subsys nqn for duplicate cntlids (Keith Busch) - disable namespace access for unsupported metadata (Keith Busch) - report write pointer for a full zone as zone start + zone len (Niklas Cassel) - fix use after free when disconnecting a reconnecting ctrl (Ruozhu Li) - fix a list corruption in nvmet-tcp (Sagi Grimberg) - Fix for a regression on DIO single bio async IO (Pavel) - ioprio seteuid fix (Davidlohr) - mtd fix that subsequently got reverted as it was broken, will get re-done and submitted for the next round - Two MD fixes via Song (Markus, zhangyue)" * tag 'block-5.16-2021-12-10' of git://git.kernel.dk/linux-block: Revert "mtd_blkdevs: don't scan partitions for plain mtdblock" block: fix ioprio_get(IOPRIO_WHO_PGRP) vs setuid(2) md: fix double free of mddev->private in autorun_array() md: fix update super 1.0 on rdev size change nvmet-tcp: fix possible list corruption for unexpected command failure block: fix single bio async DIO error handling nvme: fix use after free when disconnecting a reconnecting ctrl nvme-multipath: set ana_log_size to 0 after free ana_log_buf mtd_blkdevs: don't scan partitions for plain mtdblock nvme: report write pointer for a full zone as zone start + zone len nvme: disable namespace access for unsupported metadata nvme: show subsys nqn for duplicate cntlids
2021-12-11Merge branch 'i2c/for-current' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c fixes from Wolfram Sang: "Two more I2C driver bugfixes" * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: mpc: Use atomic read and fix break condition i2c: virtio: fix completion handling
2021-12-11Merge tag 'clk-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk driver fixes from Stephen Boyd: - Fix qcom mux logic to look at the proper parent table member. Luckily this clk type isn't very common. - Don't kill clks on qcom systems that use Trion PLLs that are enabled out of the bootloader. We will simply skip programming the PLL rate if it's already done. - Use the proper clk_ops for the qcom sm6125 ICE clks. - Use module_platform_driver() in i.MX as it can be a module. - Fix a UAF in the versatile clk driver on an error path. * tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: clk: versatile: clk-icst: use after free on error path clk: qcom: sm6125-gcc: Swap ops of ice and apps on sdcc1 clk: imx: use module_platform_driver clk: qcom: clk-alpha-pll: Don't reconfigure running Trion clk: qcom: regmap-mux: fix parent clock lookup
2021-12-11Merge tag 'devicetree-fixes-for-5.16-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull devicetree fixes from Rob Herring: - Revert schema checks on %.dtb targets. This was problematic for some external build tools. - A few DT binding example fixes - Add back dropped 'enet-phy-lane-no-swap' Ethernet PHY property - Drop erroneous if/then schema in nxp,imx7-mipi-csi2 - Add a quirk to fix some interrupt controllers use of 'interrupt-map' * tag 'devicetree-fixes-for-5.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: Revert "kbuild: Enable DT schema checks for %.dtb targets" dt-bindings: bq25980: Fixup the example dt-bindings: input: gpio-keys: Fix interrupts in example dt-bindings: net: Reintroduce PHY no lane swap binding dt-bindings: media: nxp,imx7-mipi-csi2: Drop bad if/then schema of/irq: Add a quirk for controllers with their own definition of interrupt-map dt-bindings: iio: adc: exynos-adc: Fix node name in example
2021-12-11Merge tag 'timers-v5.16-rc4' of ↵Thomas Gleixner
https://git.linaro.org/people/daniel.lezcano/linux into timers/urgent Pull timer fixes from Daniel Lezcano: - Fix build error with clang and some kernel configuration on the arm64 architected timer by inlining the erratum_set_next_event_generic() function (Marc Zyngier) - Fix probe error on the dw_apb_timer_of driver by fixing the incorrect condition previously introduced (Alexey Sheplyakov) Link: https://lore.kernel.org/r/429b796d-9395-4ca8-81f3-30911f80a9a9@linaro.org
2021-12-11Merge tag 'irqchip-fixes-5.16-2' of ↵Thomas Gleixner
git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/urgent Pull irqchip fixes from Marc Zyngier: - Fix Armada-370-XP Multi-MSi allocation to be aligned on the allocation size, as required by the PCI spec - Fix aspeed-scu interrupt acknowledgement by directly writing to the register instead of a read-modify-write sequence - Use standard bitfirl helpers in the MIPS GIC driver instead of custom constructs - Fix the NVIC driver IPR register offset - Correctly drop the reference of the device node in the irq-bcm7120-l2 driver - Fix the GICv3 ITS INVALL command by issueing a following SYNC command - Add a missing __init attribute to the init function of the Apple AIC driver Link: https://lore.kernel.org/r/20211210133516.664497-1-maz@kernel.org
2021-12-10netdevsim: don't overwrite read only ethtool parmsFilip Pokryvka
Ethtool ring feature has _max_pending attributes read-only. Set only read-write attributes in nsim_set_ringparam. This patch is useful, if netdevsim device is set-up using NetworkManager, because NetworkManager sends 0 as MAX values, as it is pointless to retrieve them in extra call, because they should be read-only. Then, the device is left in incosistent state (value > MAX). Fixes: a7fc6db099b5 ("netdevsim: support ethtool ring and coalesce settings") Signed-off-by: Filip Pokryvka <fpokryvk@redhat.com> Link: https://lore.kernel.org/r/20211210175032.411872-1-fpokryvk@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-10net: usb: qmi_wwan: add Telit 0x1070 compositionDaniele Palmas
Add the following Telit FN990 composition: 0x1070: tty, adb, rmnet, tty, tty, tty, tty Signed-off-by: Daniele Palmas <dnlplm@gmail.com> Acked-by: Bjørn Mork <bjorn@mork.no> Link: https://lore.kernel.org/r/20211210095722.22269-1-dnlplm@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-10Merge tag 'thermal-5.16-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull thermal control fix from Rafael Wysocki: "Fix the definition of one of the Tiger Lake MMIO registers in the int340x thermal driver (Sumeet Pawnikar)" * tag 'thermal-5.16-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: thermal: int340x: Fix VCoRefLow MMIO bit offset for TGL
2021-12-10Merge tag 'hwmon-for-v5.16-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon fixes from Guenter Roeck: - In the pwm-fan driver, ensure that the internal pwm state matches the state assumed by the pwm code. - Avoid EREMOTEIO errors in sht4 driver - In the nct6775 driver, make it explicit that the register value passed to nct6775_asuswmi_read() is an 8-bit value - Avoid WARNing in dell-smm driver removal after failing to create /proc/i8k - Stop using a plain integer as NULL pointer in corsair-psu driver * tag 'hwmon-for-v5.16-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (pwm-fan) Ensure the fan going on in .probe() hwmon: (sht4x) Fix EREMOTEIO errors hwmon: (nct6775) mask out bank number in nct6775_wmi_read_value() hwmon: (dell-smm) Fix warning on /proc/i8k creation error hwmon: (corsair-psu) fix plain integer used as NULL pointer
2021-12-10Merge tag 'aio-poll-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux Pull aio poll fixes from Eric Biggers: "Fix three bugs in aio poll, and one issue with POLLFREE more broadly: - aio poll didn't handle POLLFREE, causing a use-after-free. - aio poll could block while the file is ready. - aio poll called eventfd_signal() when it isn't allowed. - POLLFREE didn't handle multiple exclusive waiters correctly. This has been tested with the libaio test suite, as well as with test programs I wrote that reproduce the first two bugs. I am sending this pull request myself as no one seems to be maintaining this code" * tag 'aio-poll-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux: aio: Fix incorrect usage of eventfd_signal_allowed() aio: fix use-after-free due to missing POLLFREE handling aio: keep poll requests on waitqueue until completed signalfd: use wake_up_pollfree() binder: use wake_up_pollfree() wait: add wake_up_pollfree()
generated by cgit (git 2.34.1) at 2025-09-11 09:17:34 +0000