summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2023-11-23net: veth: fix ethtool stats reportingLorenzo Bianconi
Fix a possible misalignment between page_pool stats and tx xdp_stats reported in veth_get_ethtool_stats routine. The issue can be reproduced configuring the veth pair with the following tx/rx queues: $ip link add v0 numtxqueues 2 numrxqueues 4 type veth peer name v1 \ numtxqueues 1 numrxqueues 1 and loading a simple XDP program on v0 that just returns XDP_PASS. In this case on v0 the page_pool stats overwrites tx xdp_stats for queue 1. Fix the issue incrementing pp_idx of dev->real_num_tx_queues * VETH_TQ_STATS_LEN since we always report xdp_stats for all tx queues in ethtool. Fixes: 4fc418053ec7 ("net: veth: add page_pool stats") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Link: https://lore.kernel.org/r/c5b5d0485016836448453f12846c7c4ab75b094a.1700593593.git.lorenzo@kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-11-23octeontx2-pf: Fix ntuple rule creation to direct packet to VF with higher Rx ↵Suman Ghosh
queue than its PF It is possible to add a ntuple rule which would like to direct packet to a VF whose number of queues are greater/less than its PF's queue numbers. For example a PF can have 2 Rx queues but a VF created on that PF can have 8 Rx queues. As of today, ntuple rule will reject rule because it is checking the requested queue number against PF's number of Rx queues. As a part of this fix if the action of a ntuple rule is to move a packet to a VF's queue then the check is removed. Also, a debug information is printed to aware user that it is user's responsibility to cross check if the requested queue number on that VF is a valid one. Fixes: f0a1913f8a6f ("octeontx2-pf: Add support for ethtool ntuple filters") Signed-off-by: Suman Ghosh <sumang@marvell.com> Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20231121165624.3664182-1-sumang@marvell.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-11-23net: usb: qmi_wwan: claim interface 4 for ZTE MF290Lech Perczak
Interface 4 is used by for QMI interface in stock firmware of MF28D, the router which uses MF290 modem. Rebind it to qmi_wwan after freeing it up from option driver. The proper configuration is: Interface mapping is: 0: QCDM, 1: (unknown), 2: AT (PCUI), 2: AT (Modem), 4: QMI T: Bus=01 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#= 4 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=19d2 ProdID=0189 Rev= 0.00 S: Manufacturer=ZTE, Incorporated S: Product=ZTE LTE Technologies MSM C:* #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=84(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=86(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms Cc: Bjørn Mork <bjorn@mork.no> Signed-off-by: Lech Perczak <lech.perczak@gmail.com> Link: https://lore.kernel.org/r/20231117231918.100278-3-lech.perczak@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-11-23drm/imagination: Add firmware trace to debugfsSarah Walker
Firmware trace is exposed at /sys/debug/dri/<dev_nr>/pvr_fw/trace_0. Trace is enabled via the group mask at /sys/debug/dri/<dev_nr>/pvr_params/fw_trace_mask. Changes since v8: - Corrected license identifiers Changes since v3: - Use drm_dev_{enter,exit} Co-developed-by: Matt Coster <matt.coster@imgtec.com> Signed-off-by: Matt Coster <matt.coster@imgtec.com> Signed-off-by: Sarah Walker <sarah.walker@imgtec.com> Signed-off-by: Donald Robson <donald.robson@imgtec.com> Link: https://lore.kernel.org/r/009cf9fee347fa96c8a665dc368fc54a5ffceff0.1700668843.git.donald.robson@imgtec.com Signed-off-by: Maxime Ripard <mripard@kernel.org>
2023-11-23drm/imagination: Add firmware trace headerSarah Walker
Changes since v8: - Corrected license identifiers Changes since v5: - Split up header commit due to size Signed-off-by: Sarah Walker <sarah.walker@imgtec.com> Signed-off-by: Donald Robson <donald.robson@imgtec.com> Link: https://lore.kernel.org/r/c0fc28b2df394584afe3cc1b320140b01e17b322.1700668843.git.donald.robson@imgtec.com Signed-off-by: Maxime Ripard <mripard@kernel.org>
2023-11-23drm/imagination: Implement job submission and schedulingSarah Walker
Implement job submission ioctl. Job scheduling is implemented using drm_sched. Jobs are submitted in a stream format. This is intended to allow the UAPI data format to be independent of the actual FWIF structures in use, which vary depending on the GPU in use. The stream formats are documented at: https://gitlab.freedesktop.org/mesa/mesa/-/blob/f8d2b42ae65c2f16f36a43e0ae39d288431e4263/src/imagination/csbgen/rogue_kmd_stream.xml Changes since v8: - Updated for upstreamed DRM scheduler changes - Removed workaround code for the pending_list previously being updated after run_job() returned - Fixed null deref in pvr_queue_cleanup_fw_context() for bad stream ptr given to create_context ioctl - Corrected license identifiers Changes since v7: - Updated for v8 "DRM scheduler changes for XE" patchset Changes since v6: - Fix fence handling in pvr_sync_signal_array_add() - Add handling for SUBMIT_JOB_FRAG_CMD_DISABLE_PIXELMERGE flag - Fix missing dma_resv locking in job submit path Changes since v5: - Fix leak in job creation error path Changes since v4: - Use a regular workqueue for job scheduling Changes since v3: - Support partial render jobs - Add job timeout handler - Split sync handling out of job code - Use drm_dev_{enter,exit} Changes since v2: - Use drm_sched for job scheduling Co-developed-by: Boris Brezillon <boris.brezillon@collabora.com> Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Co-developed-by: Donald Robson <donald.robson@imgtec.com> Signed-off-by: Donald Robson <donald.robson@imgtec.com> Signed-off-by: Sarah Walker <sarah.walker@imgtec.com> Link: https://lore.kernel.org/r/c98dab7a5f5fb891fbed7e4990d19b5d13964365.1700668843.git.donald.robson@imgtec.com Signed-off-by: Maxime Ripard <mripard@kernel.org>
2023-11-23drm/imagination: Implement context creation/destruction ioctlsSarah Walker
Implement ioctls for the creation and destruction of contexts. Contexts are used for job submission and each is associated with a particular job type. Changes since v8: - Fixed one error path in pvr_stream_process_1() - Corrected license identifiers Changes since v5: - Fix context release in final error path in pvr_context_create() Changes since v3: - Use drm_dev_{enter,exit} Co-developed-by: Boris Brezillon <boris.brezillon@collabora.com> Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Signed-off-by: Sarah Walker <sarah.walker@imgtec.com> Signed-off-by: Donald Robson <donald.robson@imgtec.com> Link: https://lore.kernel.org/r/ac474a1f7dda2582d290798e4837140a2989aa2a.1700668843.git.donald.robson@imgtec.com Signed-off-by: Maxime Ripard <mripard@kernel.org>
2023-11-23drm/imagination: Implement free list and HWRT create and destroy ioctlsSarah Walker
Implement ioctls to create and destroy free lists and HWRT datasets. Free lists are used for GPU-side memory allocation during geometry processing. HWRT datasets are the FW-side structures representing render targets. Changes since v8: - Corrected license identifiers Changes since v6: - Fix out-of-bounds shift in get_cr_multisamplectl_val() Changes since v4: - Remove use of drm_gem_shmem_get_pages() Changes since v3: - Support free list grow requests from FW - Use drm_dev_{enter,exit} Co-developed-by: Boris Brezillon <boris.brezillon@collabora.com> Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Co-developed-by: Donald Robson <donald.robson@imgtec.com> Signed-off-by: Donald Robson <donald.robson@imgtec.com> Signed-off-by: Sarah Walker <sarah.walker@imgtec.com> Link: https://lore.kernel.org/r/919358c5887a7628da588c455a5bb7e3ea4b47ae.1700668843.git.donald.robson@imgtec.com Signed-off-by: Maxime Ripard <mripard@kernel.org>
2023-11-23drm/imagination: Implement MIPS firmware processor and MMU supportSarah Walker
Add support for the MIPS firmware processor, used in the Series AXE GPU. The MIPS firmware processor uses a separate MMU to the rest of the GPU, so this patch adds support for that as well. Changes since v8: - Corrected license identifiers Changes since v6: - Fix integer overflow in VM map error path Changes since v5: - Use alloc_page() when allocating MIPS pagetable Changes since v3: - Get regs resource (removed from GPU resources commit) Signed-off-by: Sarah Walker <sarah.walker@imgtec.com> Signed-off-by: Donald Robson <donald.robson@imgtec.com> Link: https://lore.kernel.org/r/a114f7b3e97cb07460c7f2842901716a9207b0c4.1700668843.git.donald.robson@imgtec.com Signed-off-by: Maxime Ripard <mripard@kernel.org>
2023-11-23drm/imagination: Implement firmware infrastructure and META FW supportSarah Walker
The infrastructure includes parsing of the firmware image, initialising FW-side structures, handling the kernel and firmware command ringbuffers and starting & stopping the firmware processor. This patch also adds the necessary support code for the META firmware processor. Changes since v8: - Fix documentation for pvr_fwccb_process() - Corrected license identifiers Changes since v6: - Add a minimum retry count to pvr_kccb_reserve_slot_sync() Changes since v5: - Add workaround for BRN 71242 - Attempt to recover GPU on MMU flush command failure Changes since v4: - Remove use of drm_gem_shmem_get_pages() - Remove interrupt resource name Changes since v3: - Hard reset FW processor on watchdog timeout - Switch to threaded IRQ - Rework FW object creation/initialisation to aid hard reset - Added MODULE_FIRMWARE() - Use drm_dev_{enter,exit} Signed-off-by: Sarah Walker <sarah.walker@imgtec.com> Signed-off-by: Donald Robson <donald.robson@imgtec.com> Link: https://lore.kernel.org/r/bb52a8dc84f296b37dc6668dfe8fbaf2ba551139.1700668843.git.donald.robson@imgtec.com Signed-off-by: Maxime Ripard <mripard@kernel.org>
2023-11-23drm/imagination: Implement power managementSarah Walker
Add power management to the driver, using runtime pm. The power off sequence depends on firmware commands which are not implemented in this patch. Changes since v8: - Corrected license identifiers Changes since v5: - Use RUNTIME_PM_OPS() to declare PM callbacks - Add Kconfig dependency on CONFIG_PM Changes since v4: - Suspend runtime PM before unplugging device on rmmod Changes since v3: - Don't power device when calling pvr_device_gpu_fini() - Documentation for pvr_dev->lost has been improved - pvr_power_init() renamed to pvr_watchdog_init() - Use drm_dev_{enter,exit} Changes since v2: - Use runtime PM - Implement watchdog Signed-off-by: Sarah Walker <sarah.walker@imgtec.com> Signed-off-by: Donald Robson <donald.robson@imgtec.com> Reviewed-by: Maxime Ripard <mripard@kernel.org> Link: https://lore.kernel.org/r/e09af4ef1ff514e1d6d7f97c7c5032c643c56f9c.1700668843.git.donald.robson@imgtec.com Signed-off-by: Maxime Ripard <mripard@kernel.org>
2023-11-23drm/imagination: Add GEM and VM related codeDonald Robson
Add a GEM implementation based on drm_gem_shmem, and support code for the PowerVR GPU MMU. The GPU VA manager is used for address space management. Changes since v8: - Updated for changes to drm_gpuvm - Switched to dma_resv locking for vm ops - Removed linked lists for collecting BOs in vm_context and for freeing after ops. This is now done internally in drm_gpuvm - Corrected license identifiers Changes since v7: - kernel-doc fixes - Remove prefixes from DRM_PVR_BO_* flags - CREATE_BO ioctl now returns an error if provided size isn't page aligned - Optimised MMU flushes Changes since v6: - Don't initialise kernel_vm_ctx when using MIPS firmware processor - Rename drm_gpuva_manager uses to drm_gpuvm - Sync GEM object to device on creation Changes since v5: - Use WRITE_ONCE() when writing to page tables - Add memory barriers to page table insertion - Fixed double backing page alloc on page table objects - Fix BO mask checks in DRM_IOCTL_PVR_CREATE_BO handler - Document use of pvr_page_table_*_idx when preallocing page table objs - Remove pvr_vm_gpuva_mapping_init() - Remove NULL check for unmap op in remap function - Protect gem object with mutex during drm_gpuva_link/unlink - Defer free or release of page table pages until after TLB flush - Use drm_gpuva_op_remap_get_unmap_range() helper Changes since v4: - Correct sync function in vmap/vunmap function documentation - Update for upstream GPU VA manager - Fix missing frees when unmapping drm_gpuva objects - Always zero GEM BOs on creation Changes since v3: - Split MMU and VM code - Register page table allocations with kmemleak - Use drm_dev_{enter,exit} Changes since v2: - Use GPU VA manager - Use drm_gem_shmem Co-developed-by: Matt Coster <matt.coster@imgtec.com> Signed-off-by: Matt Coster <matt.coster@imgtec.com> Co-developed-by: Donald Robson <donald.robson@imgtec.com> Signed-off-by: Donald Robson <donald.robson@imgtec.com> Signed-off-by: Sarah Walker <sarah.walker@imgtec.com> Link: https://lore.kernel.org/r/3c96dd170efe759b73897e3675d7310a7c4b06d0.1700668843.git.donald.robson@imgtec.com Signed-off-by: Maxime Ripard <mripard@kernel.org>
2023-11-23drm/imagination: Add GPU ID parsing and firmware loadingSarah Walker
Read the GPU ID register at probe time and select the correct features/quirks/enhancements. Use the GPU ID to form the firmware file name and load the firmware. The features/quirks/enhancements arrays are currently hardcoded in the driver for the supported GPUs. We are looking at moving this information to the firmware image. Changes since v8: - Corrected license identifiers Changes since v7: - Fix kerneldoc for pvr_device_info_set_enhancements() Changes since v5: - Add BRN 71242 to device info Changes since v4: - Retrieve device information from firmware header - Pull forward firmware header parsing from FW infrastructure patch - Use devm_add_action_or_reset to release firmware Changes since v3: - Use drm_dev_{enter,exit} Co-developed-by: Frank Binns <frank.binns@imgtec.com> Signed-off-by: Frank Binns <frank.binns@imgtec.com> Co-developed-by: Matt Coster <matt.coster@imgtec.com> Signed-off-by: Matt Coster <matt.coster@imgtec.com> Co-developed-by: Donald Robson <donald.robson@imgtec.com> Signed-off-by: Donald Robson <donald.robson@imgtec.com> Signed-off-by: Sarah Walker <sarah.walker@imgtec.com> Link: https://lore.kernel.org/r/1ff76f7a5b45c742279c78910f8491b8a5e7f6e6.1700668843.git.donald.robson@imgtec.com Signed-off-by: Maxime Ripard <mripard@kernel.org>
2023-11-23drm/imagination: Add FWIF headersSarah Walker
Changes since v8: - Corrected license identifiers Changes since v7: - Add padding to struct rogue_fwif_ccb_ctl to place read and write offsets in different cache lines Changes since v5: - Split up header commit due to size - Add BRN 71242 to device info Changes since v4: - Add FW header device info Signed-off-by: Sarah Walker <sarah.walker@imgtec.com> Signed-off-by: Donald Robson <donald.robson@imgtec.com> Acked-by: Maxime Ripard <mripard@kernel.org> Link: https://lore.kernel.org/r/aa681533a02bd2d46af17a6a6010f4d6048fbb0a.1700668843.git.donald.robson@imgtec.com Signed-off-by: Maxime Ripard <mripard@kernel.org>
2023-11-23drm/imagination: Add firmware and MMU related headersSarah Walker
Changes since v8: - Corrected license identifiers Changes since v5: - Split up header commit due to size Signed-off-by: Sarah Walker <sarah.walker@imgtec.com> Signed-off-by: Donald Robson <donald.robson@imgtec.com> Acked-by: Maxime Ripard <mripard@kernel.org> Link: https://lore.kernel.org/r/23ee233dfbe6f2239328f8201fd6d8c1017cea58.1700668843.git.donald.robson@imgtec.com Signed-off-by: Maxime Ripard <mripard@kernel.org>
2023-11-23drm/imagination: Add GPU register headersSarah Walker
Changes since v8: - Corrected license identifiers Changes since v5: - Split up header commit due to size Signed-off-by: Sarah Walker <sarah.walker@imgtec.com> Signed-off-by: Donald Robson <donald.robson@imgtec.com> Reviewed-by: Maxime Ripard <mripard@kernel.org> Link: https://lore.kernel.org/r/9f1fbf6c18e9644ac10712e05893701f06aee6ae.1700668843.git.donald.robson@imgtec.com Signed-off-by: Maxime Ripard <mripard@kernel.org>
2023-11-23drm/imagination: Get GPU resourcesSarah Walker
Acquire clock and register resources, and enable/map as appropriate. Changes since v8: - Corrected license identifiers Changes since v3: - Remove regulator resource (not used on supported platform) - Use devm helpers - Use devm_clk_get_optional() for optional clocks - Don't prepare clocks on resource acquisition - Drop pvr_device_clk_core_get_freq() helper - Drop pvr_device_reg_fini() - Drop NULLing of clocks in pvr_device_clk_init() - Use dev_err_probe() on clock acquisition failure - Remove PVR_CR_READ/WRITE helper macros - Improve documentation for GPU clocks - Remove regs resource (not used in this commit) Co-developed-by: Frank Binns <frank.binns@imgtec.com> Signed-off-by: Frank Binns <frank.binns@imgtec.com> Co-developed-by: Matt Coster <matt.coster@imgtec.com> Signed-off-by: Matt Coster <matt.coster@imgtec.com> Signed-off-by: Sarah Walker <sarah.walker@imgtec.com> Signed-off-by: Donald Robson <donald.robson@imgtec.com> Reviewed-by: Maxime Ripard <mripard@kernel.org> Link: https://lore.kernel.org/r/579027bd5be4eb3218c9784050ded2326ecbc352.1700668843.git.donald.robson@imgtec.com Signed-off-by: Maxime Ripard <mripard@kernel.org>
2023-11-23drm/imagination: Add skeleton PowerVR driverSarah Walker
This adds the basic skeleton of the driver. The driver registers itself with DRM on probe. Ioctl handlers are currently implemented as stubs. Changes since v8: - Corrected license identifiers Changes since v5: - Update compatible string & description to match marketing name - Checkpatch fixes in to/from_pvr_device/file macros Changes since v3: - Clarify supported GPU generations in driver description - Use drm_dev_unplug() when removing device - Change from_* and to_* functions to macros - Fix IS_PTR/PTR_ERR confusion in pvr_probe() - Remove err_out labels in favour of direct returning - Remove specific am62 compatible match string - Drop MODULE_FIRMWARE() Co-developed-by: Frank Binns <frank.binns@imgtec.com> Signed-off-by: Frank Binns <frank.binns@imgtec.com> Co-developed-by: Matt Coster <matt.coster@imgtec.com> Signed-off-by: Matt Coster <matt.coster@imgtec.com> Signed-off-by: Sarah Walker <sarah.walker@imgtec.com> Signed-off-by: Donald Robson <donald.robson@imgtec.com> Reviewed-by: Maxime Ripard <mripard@kernel.org> Link: https://lore.kernel.org/r/fed8a77e29620a61aed2684f802339759082cf1b.1700668843.git.donald.robson@imgtec.com Signed-off-by: Maxime Ripard <mripard@kernel.org>
2023-11-23drm/i915/display: Do not check psr2 if psr/panel replay is not supportedJouni Högander
Do not continue to psr2 checks if psr or panel replay is not supported. Cc: Animesh Manna <animesh.manna@intel.com> Fixes: b8cf5b5d266e ("drm/i915/panelreplay: Initializaton and compute config for panel replay") Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/9670 Signed-off-by: Jouni Högander <jouni.hogander@intel.com> Reviewed-by: Animesh Manna <animesh.manna@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231120130214.3332726-1-jouni.hogander@intel.com
2023-11-23drm/i915/display: Use int type for entry_setup_framesMika Kahola
entry_setup_frames variable is defined as u8. However, the function call intel_psr_entry_setup_frames() can return negative error code. There is a type mismatch here, so let's switch to use int here as well. Fixes: 2b981d57e480 ("drm/i915/display: Support PSR entry VSC packet to be transmitted one frame earlier") Signed-off-by: Mika Kahola <mika.kahola@intel.com> Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231116090512.480373-1-mika.kahola@intel.com
2023-11-22nvme: tcp: fix compile-time checks for TLS modeArnd Bergmann
When CONFIG_NVME_KEYRING is enabled as a loadable module, but the TCP host code is built-in, it fails to link: arm-linux-gnueabi-ld: drivers/nvme/host/tcp.o: in function `nvme_tcp_setup_ctrl': tcp.c:(.text+0x1940): undefined reference to `nvme_tls_psk_default' The problem is that the compile-time conditionals are inconsistent here, using a mix of #ifdef CONFIG_NVME_TCP_TLS, IS_ENABLED(CONFIG_NVME_TCP_TLS) and IS_ENABLED(CONFIG_NVME_KEYRING) checks, with CONFIG_NVME_KEYRING controlling whether the implementation is actually built. Change it to use IS_ENABLED(CONFIG_NVME_KEYRING) checks consistently, which should help readability and make it less error-prone. Combining it with the check for the ctrl->opts->tls flag lets the compiler drop all the TLS code in configurations without this feature, which also helps runtime behavior in addition to avoiding the link failure. To make it possible for the compiler to build the dead code, both the tls_handshake_timeout variable and the TLS specific members of nvme_tcp_queue need to be moved out of the #ifdef block as well, but at least the former of these gets optimized out again. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20231122224719.4042108-4-arnd@kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-11-22nvme: target: fix Kconfig select statementsArnd Bergmann
When the NVME target code is built-in but its TCP frontend is a loadable module, enabling keyring support causes a link failure: x86_64-linux-ld: vmlinux.o: in function `nvmet_ports_make': configfs.c:(.text+0x100a211): undefined reference to `nvme_keyring_id' The problem is that CONFIG_NVME_TARGET_TCP_TLS is a 'bool' symbol that depends on the tristate CONFIG_NVME_TARGET_TCP, so any 'select' from it inherits the state of the tristate symbol rather than the intended CONFIG_NVME_TARGET one that contains the actual call. The same thing is true for CONFIG_KEYS, which itself is required for NVME_KEYRING. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20231122224719.4042108-3-arnd@kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-11-22nvme: target: fix nvme_keyring_id() referencesArnd Bergmann
In configurations without CONFIG_NVME_TARGET_TCP_TLS, the keyring code might not be available, or using it will result in a runtime failure: x86_64-linux-ld: vmlinux.o: in function `nvmet_ports_make': configfs.c:(.text+0x100a211): undefined reference to `nvme_keyring_id' Add a check to ensure we only check the keyring if there is a chance of it being used, which avoids both the runtime and link-time problems. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20231122224719.4042108-2-arnd@kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-11-23drm/rockchip: rk3066_hdmi: include drm/drm_atomic.hArnd Bergmann
Without this header, the newly added code fails to build: drivers/gpu/drm/rockchip/rk3066_hdmi.c: In function 'rk3066_hdmi_encoder_enable': drivers/gpu/drm/rockchip/rk3066_hdmi.c:397:22: error: implicit declaration of function 'drm_atomic_get_new_connector_state'; did you mean 'drm_atomic_helper_connector_reset'? [-Werror=implicit-function-declaration] 397 | conn_state = drm_atomic_get_new_connector_state(state, &hdmi->connector); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ | drm_atomic_helper_connector_reset drivers/gpu/drm/rockchip/rk3066_hdmi.c:397:20: error: assignment to 'struct drm_connector_state *' from 'int' makes pointer from integer without a cast [-Werror=int-conversion] 397 | conn_state = drm_atomic_get_new_connector_state(state, &hdmi->connector); | ^ drivers/gpu/drm/rockchip/rk3066_hdmi.c:401:22: error: implicit declaration of function 'drm_atomic_get_new_crtc_state'; did you mean 'drm_atomic_helper_swap_state'? [-Werror=implicit-function-declaration] 401 | crtc_state = drm_atomic_get_new_crtc_state(state, conn_state->crtc); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~ | drm_atomic_helper_swap_state drivers/gpu/drm/rockchip/rk3066_hdmi.c:401:20: error: assignment to 'struct drm_crtc_state *' from 'int' makes pointer from integer without a cast [-Werror=int-conversion] 401 | crtc_state = drm_atomic_get_new_crtc_state(state, conn_state->crtc); | ^ Fixes: ae3436a5e7c2 ("drm/rockchip: rk3066_hdmi: Switch encoder hooks to atomic") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Randy Dunlap <rdunlap@infradead.org> Tested-by: Randy Dunlap <rdunlap@infradead.org> # build-tested Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/20231122221838.3164349-1-arnd@kernel.org
2023-11-22drm/nouveau/fifo: Remove duplicated include in chan.cYang Li
./drivers/gpu/drm/nouveau/nvkm/engine/fifo/chan.c: chid.h is included more than once. Reported-by: Abaci Robot <abaci@linux.alibaba.com> Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=7603 Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Reviewed-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231122004926.84933-1-yang.lee@linux.alibaba.com
2023-11-22Merge tag 'nvme-6.7-2023-11-22' of git://git.infradead.org/nvme into block-6.7Jens Axboe
Pull NVMe fixes from Keith: "nvme fixes for Linux 6.7 - TCP TLS fixes (Hannes) - Authentifaction fixes (Mark, Hannes) - Properly terminate target names (Christoph)" * tag 'nvme-6.7-2023-11-22' of git://git.infradead.org/nvme: nvme: move nvme_stop_keep_alive() back to original position nvmet-tcp: always initialize tls_handshake_tmo_work nvmet: nul-terminate the NQNs passed in the connect command nvme: blank out authentication fabrics options if not configured nvme: catch errors from nvme_configure_metadata() nvme-tcp: only evaluate 'tls' option if TLS is selected nvme-auth: set explanation code for failure2 msgs nvme-auth: unlock mutex in one place only
2023-11-22drm/i915/iosf: Drop unused APIsAndy Shevchenko
Drop unused vlv_iosf_sb_read() and vlv_iosf_sb_write(). Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Jani Nikula <jani.nikula@intel.com> Tested-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231103201831.1037416-17-andriy.shevchenko@linux.intel.com
2023-11-22drm/i915/dsi: Combine checks in mipi_exec_gpio()Andy Shevchenko
For a couple of cases the branches call the same bxt_gpio_set_value(). As Ville suggested they can be combined by dropping the DISPLAY_VER() check from Gen 11 to Gen 9. Do it that way. Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231103201831.1037416-16-andriy.shevchenko@linux.intel.com
2023-11-22drm/i915/dsi: Replace poking of CHV GPIOs behind the driver's backAndy Shevchenko
It's a dirty hack in the driver that pokes GPIO registers behind the driver's back. Moreoever it might be problematic as simultaneous I/O may hang the system, see the commit 0bd50d719b00 ("pinctrl: cherryview: prevent concurrent access to GPIO controllers") for the details. Taking all this into consideration replace the hack with proper GPIO APIs being used. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Jani Nikula <jani.nikula@intel.com> Tested-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231103201831.1037416-15-andriy.shevchenko@linux.intel.com
2023-11-22drm/i915/dsi: Prepare soc_gpio_set_value() to distinguish GPIO communitiesAndy Shevchenko
Currently soc_gpio_set_value() supports only a single indexing for GPIO pin. For CHV case, for example, we will need to distinguish community based index from the one that VBT is using. Introduce an additional parameter to soc_gpio_set_value() and its callers. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Jani Nikula <jani.nikula@intel.com> Tested-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231103201831.1037416-14-andriy.shevchenko@linux.intel.com
2023-11-22drm/i915/dsi: Replace poking of VLV GPIOs behind the driver's backAndy Shevchenko
It's a dirty hack in the driver that pokes GPIO registers behind the driver's back. Moreoever it might be problematic as simultaneous I/O may hang the system, see the commit 40ecab551232 ("pinctrl: baytrail: Really serialize all register accesses") for the details. Taking all this into consideration replace the hack with proper GPIO APIs being used. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Jani Nikula <jani.nikula@intel.com> Tested-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231103201831.1037416-13-andriy.shevchenko@linux.intel.com
2023-11-22drm/i915/dsi: Extract common soc_gpio_set_value() helperAndy Shevchenko
Extract a common soc_gpio_set_value() helper that may be used by a few SoCs. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Jani Nikula <jani.nikula@intel.com> Tested-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231103201831.1037416-12-andriy.shevchenko@linux.intel.com
2023-11-22drm/i915/dsi: Fix wrong initial value for GPIOs in bxt_gpio_set_value()Hans de Goede
Fix wrong initial value for GPIOs in bxt_gpio_set_value(). Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Jani Nikula <jani.nikula@intel.com> Tested-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231103201831.1037416-11-andriy.shevchenko@linux.intel.com
2023-11-22drm/i915/dsi: Remove GPIO lookup table at the end of intel_dsi_vbt_gpio_init()Hans de Goede
To properly deal with GPIOs used in MIPI panel sequences a temporary GPIO lookup will be used. Since there can only be 1 GPIO lookup table for the "0000:00:02.0" device this will not work if the GPIO lookup table used by intel_dsi_vbt_gpio_init() is still registered. After getting the "backlight" and "panel" GPIOs the lookup table registered by intel_dsi_vbt_gpio_init() is no longer necessary, remove it so that another temporary lookup-table for the "0000:00:02.0" device can be added. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Jani Nikula <jani.nikula@intel.com> Tested-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231103201831.1037416-10-andriy.shevchenko@linux.intel.com
2023-11-22drm/i915/dsi: Replace check with a (missing) MIPI sequence nameAndy Shevchenko
Names of the MIPI sequence steps are sequential and defined, no need to check for the gaps. However in seq_name the MIPI_SEQ_END is missing. Add it there, and drop unneeded NULL check in sequence_name(). Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Jani Nikula <jani.nikula@intel.com> Tested-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231103201831.1037416-9-andriy.shevchenko@linux.intel.com
2023-11-22drm/i915/dsi: Get rid of redundant 'else'Andy Shevchenko
In the snippets like the following if (...) return / goto / break / continue ...; else ... the 'else' is redundant. Get rid of it. Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Jani Nikula <jani.nikula@intel.com> Tested-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231103201831.1037416-8-andriy.shevchenko@linux.intel.com
2023-11-22drm/i915/dsi: Replace while(1) with one with clear exit conditionAndy Shevchenko
Move existing condition to while(), so it will be clear on what circumstances the loop is successfully finishing. Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Jani Nikula <jani.nikula@intel.com> Tested-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231103201831.1037416-7-andriy.shevchenko@linux.intel.com
2023-11-22drm/i915/dsi: bxt/icl GPIO set value do not need gpio sourceJani Nikula
Drop the unused parameter. Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231103201831.1037416-6-andriy.shevchenko@linux.intel.com
2023-11-22drm/i915/dsi: rename platform specific *_exec_gpio() to *_gpio_set_value()Jani Nikula
The lowest level functions are about setting GPIO values, not about executing any sequences anymore. Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231103201831.1037416-5-andriy.shevchenko@linux.intel.com
2023-11-22drm/i915/dsi: clarify GPIO exec sequenceJani Nikula
With the various sequence versions and pointer increments interleaved, it's a bit hard to decipher what's going on. Add separate paths for different sequence versions. Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231103201831.1037416-4-andriy.shevchenko@linux.intel.com
2023-11-22drm/i915/dsi: switch mipi_exec_gpio() from dev_priv to i915Jani Nikula
Follow the contemporary conventions. Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231103201831.1037416-3-andriy.shevchenko@linux.intel.com
2023-11-22drm/i915/dsi: assume BXT gpio works for non-native GPIOJani Nikula
Purely a guess. Drop the nop function. Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231103201831.1037416-2-andriy.shevchenko@linux.intel.com
2023-11-22nvme: move nvme_stop_keep_alive() back to original positionHannes Reinecke
Stopping keep-alive not only stops the keep-alive workqueue, but also needs to be synchronized with I/O termination as we must not send a keep-alive command after all I/O had been terminated. So to avoid any regressions move the call to stop_keep_alive() back to its original position and ensure that keep-alive is correctly stopped failing to setup the admin queue. Fixes: 4733b65d82bd ("nvme: start keep-alive after admin queue setup") Suggested-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Keith Busch <kbusch@kernel.org>
2023-11-22USB: dwc3: qcom: fix ACPI platform device leakJohan Hovold
Make sure to free the "urs" platform device, which is created for some ACPI platforms, on probe errors and on driver unbind. Compile-tested only. Fixes: c25c210f590e ("usb: dwc3: qcom: add URS Host support for sdm845 ACPI boot") Cc: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Acked-by: Andrew Halaney <ahalaney@redhat.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Link: https://lore.kernel.org/r/20231117173650.21161-4-johan+linaro@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-11-22USB: dwc3: qcom: fix software node leak on probe errorsJohan Hovold
Make sure to remove the software node also on (ACPI) probe errors to avoid leaking the underlying resources. Note that the software node is only used for ACPI probe so the driver unbind tear down is updated to match probe. Fixes: 8dc6e6dd1bee ("usb: dwc3: qcom: Constify the software node") Cc: stable@vger.kernel.org # 5.12 Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Acked-by: Andrew Halaney <ahalaney@redhat.com> Link: https://lore.kernel.org/r/20231117173650.21161-3-johan+linaro@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-11-22USB: dwc3: qcom: fix resource leaks on probe deferralJohan Hovold
The driver needs to deregister and free the newly allocated dwc3 core platform device on ACPI probe errors (e.g. probe deferral) and on driver unbind but instead it leaked those resources while erroneously dropping a reference to the parent platform device which is still in use. For OF probing the driver takes a reference to the dwc3 core platform device which has also always been leaked. Fix the broken ACPI tear down and make sure to drop the dwc3 core reference for both OF and ACPI. Fixes: 8fd95da2cfb5 ("usb: dwc3: qcom: Release the correct resources in dwc3_qcom_remove()") Fixes: 2bc02355f8ba ("usb: dwc3: qcom: Add support for booting with ACPI") Fixes: a4333c3a6ba9 ("usb: dwc3: Add Qualcomm DWC3 glue driver") Cc: stable@vger.kernel.org # 4.18 Cc: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Cc: Lee Jones <lee@kernel.org> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Acked-by: Andrew Halaney <ahalaney@redhat.com> Link: https://lore.kernel.org/r/20231117173650.21161-2-johan+linaro@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-11-22USB: dwc3: qcom: simplify wakeup interrupt setupJohan Hovold
Use the IRQF_NO_AUTOEN irq flag when requesting the wakeup interrupts instead of setting it separately. No functional change intended. Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Andrew Halaney <ahalaney@redhat.com> Link: https://lore.kernel.org/r/20231120161607.7405-4-johan+linaro@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-11-22USB: dwc3: qcom: fix wakeup after probe deferralJohan Hovold
The Qualcomm glue driver is overriding the interrupt trigger types defined by firmware when requesting the wakeup interrupts during probe. This can lead to a failure to map the DP/DM wakeup interrupts after a probe deferral as the firmware defined trigger types do not match the type used for the initial mapping: irq: type mismatch, failed to map hwirq-14 for interrupt-controller@b220000! irq: type mismatch, failed to map hwirq-15 for interrupt-controller@b220000! Fix this by not overriding the firmware provided trigger types when requesting the wakeup interrupts. Fixes: a4333c3a6ba9 ("usb: dwc3: Add Qualcomm DWC3 glue driver") Cc: stable@vger.kernel.org # 4.18 Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Andrew Halaney <ahalaney@redhat.com> Link: https://lore.kernel.org/r/20231120161607.7405-3-johan+linaro@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-11-22usb: misc: onboard-hub: add support for Microchip USB5744Stefan Eichenberger
Add support for the Microchip USB5744 USB3.0 and USB2.0 Hub. The Microchip USB5744 supports two power supplies, one for 1V2 and one for 3V3. According to the datasheet there is no need for a delay between power on and reset, so this value is set to 0. Signed-off-by: Stefan Eichenberger <stefan.eichenberger@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Cc: stable <stable@kernel.org> Acked-by: Matthias Kaehlcke <mka@chromium.org> Link: https://lore.kernel.org/r/20231113145921.30104-3-francesco@dolcini.it Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-11-22Revert "net: r8169: Disable multicast filter for RTL8168H and RTL8107E"Heiner Kallweit
This reverts commit efa5f1311c4998e9e6317c52bc5ee93b3a0f36df. I couldn't reproduce the reported issue. What I did, based on a pcap packet log provided by the reporter: - Used same chip version (RTL8168h) - Set MAC address to the one used on the reporters system - Replayed the EAPOL unicast packet that, according to the reporter, was filtered out by the mc filter. The packet was properly received. Therefore the root cause of the reported issue seems to be somewhere else. Disabling mc filtering completely for the most common chip version is a quite big hammer. Therefore revert the change and wait for further analysis results from the reporter. Cc: stable@vger.kernel.org Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-10-02 15:38:20 +0000