| Age | Commit message (Collapse) | Author |
|---|
|
The `amdgpu_ucode_request` helper will ensure that the return code for
missing firmware is -ENODEV so that early_init can fail.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Fixed bug on error when unloading amdgpu.
The error message is as follows:
[ 377.706202] kernel BUG at drivers/gpu/drm/drm_buddy.c:278!
[ 377.706215] invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
[ 377.706222] CPU: 4 PID: 8610 Comm: modprobe Tainted: G IOE 6.0.0-thomas #1
[ 377.706231] Hardware name: ASUS System Product Name/PRIME Z390-A, BIOS 2004 11/02/2021
[ 377.706238] RIP: 0010:drm_buddy_free_block+0x26/0x30 [drm_buddy]
[ 377.706264] Code: 00 00 00 90 0f 1f 44 00 00 48 8b 0e 89 c8 25 00 0c 00 00 3d 00 04 00 00 75 10 48 8b 47 18 48 d3 e0 48 01 47 28 e9 fa fe ff ff <0f> 0b 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 41 54 55 48 89 f5 53
[ 377.706282] RSP: 0018:ffffad2dc4683cb8 EFLAGS: 00010287
[ 377.706289] RAX: 0000000000000000 RBX: ffff8b1743bd5138 RCX: 0000000000000000
[ 377.706297] RDX: ffff8b1743bd5160 RSI: ffff8b1743bd5c78 RDI: ffff8b16d1b25f70
[ 377.706304] RBP: ffff8b1743bd59e0 R08: 0000000000000001 R09: 0000000000000001
[ 377.706311] R10: ffff8b16c8572400 R11: ffffad2dc4683cf0 R12: ffff8b16d1b25f70
[ 377.706318] R13: ffff8b16d1b25fd0 R14: ffff8b1743bd59c0 R15: ffff8b16d1b25f70
[ 377.706325] FS: 00007fec56c72c40(0000) GS:ffff8b1836500000(0000) knlGS:0000000000000000
[ 377.706334] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 377.706340] CR2: 00007f9b88c1ba50 CR3: 0000000110450004 CR4: 00000000003706e0
[ 377.706347] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 377.706354] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 377.706361] Call Trace:
[ 377.706365] <TASK>
[ 377.706369] drm_buddy_free_list+0x2a/0x60 [drm_buddy]
[ 377.706376] amdgpu_vram_mgr_fini+0xea/0x180 [amdgpu]
[ 377.706572] amdgpu_ttm_fini+0x12e/0x1a0 [amdgpu]
[ 377.706650] amdgpu_bo_fini+0x22/0x90 [amdgpu]
[ 377.706727] gmc_v11_0_sw_fini+0x26/0x30 [amdgpu]
[ 377.706821] amdgpu_device_fini_sw+0xa1/0x3c0 [amdgpu]
[ 377.706897] amdgpu_driver_release_kms+0x12/0x30 [amdgpu]
[ 377.706975] drm_dev_release+0x20/0x40 [drm]
[ 377.707006] release_nodes+0x35/0xb0
[ 377.707014] devres_release_all+0x8b/0xc0
[ 377.707020] device_unbind_cleanup+0xe/0x70
[ 377.707027] device_release_driver_internal+0xee/0x160
[ 377.707033] driver_detach+0x44/0x90
[ 377.707039] bus_remove_driver+0x55/0xe0
[ 377.707045] pci_unregister_driver+0x3b/0x90
[ 377.707052] amdgpu_exit+0x11/0x6c [amdgpu]
[ 377.707194] __x64_sys_delete_module+0x142/0x2b0
[ 377.707201] ? fpregs_assert_state_consistent+0x22/0x50
[ 377.707208] ? exit_to_user_mode_prepare+0x3e/0x190
[ 377.707215] do_syscall_64+0x38/0x90
[ 377.707221] entry_SYSCALL_64_after_hwframe+0x63/0xcd
Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
Removing the firmware framebuffer from the driver means that even
if the driver doesn't support the IP blocks in a GPU it will no
longer be functional after the driver fails to initialize.
This change will ensure that unsupported IP blocks at least cause
the driver to work with the EFI framebuffer.
Cc: stable@vger.kernel.org
Suggested-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Fix potential NULL dereference, in the case when "man", the resource manager
might be NULL, when/if we print debug information.
Cc: Alex Deucher <Alexander.Deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: AMD Graphics <amd-gfx@lists.freedesktop.org>
Cc: Dan Carpenter <error27@gmail.com>
Cc: kernel test robot <lkp@intel.com>
Fixes: 7554886daa31ea ("drm/amdgpu: Fix size validation for non-exclusive domains (v4)")
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
All microcode runs a basic validation after it's been loaded. Each
IP block as part of init will run both.
Introduce a wrapper for request_firmware and amdgpu_ucode_validate.
This wrapper will also remap any error codes from request_firmware
to -ENODEV. This is so that early_init will fail if firmware couldn't
be loaded instead of the IP block being disabled.
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The special case for the one dGPU has been moved into
`amdgpu_ucode_ip_version_decode`, so simplify this code.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Remove the special casing from SMU v11 code. No intended functional
changes.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This will allow other parts of the driver that currently special
case firmware file names to before IP version style naming to just
have a single call to `amdgpu_ucode_ip_version_decode`.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Removing the firmware framebuffer from the driver means that even
if the driver doesn't support the IP blocks in a GPU it will no
longer be functional after the driver fails to initialize.
This change will ensure that unsupported IP blocks at least cause
the driver to work with the EFI framebuffer.
Cc: stable@vger.kernel.org
Suggested-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Fix potential NULL dereference, in the case when "man", the resource manager
might be NULL, when/if we print debug information.
Cc: Alex Deucher <Alexander.Deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: AMD Graphics <amd-gfx@lists.freedesktop.org>
Cc: Dan Carpenter <error27@gmail.com>
Cc: kernel test robot <lkp@intel.com>
Fixes: 7554886daa31ea ("drm/amdgpu: Fix size validation for non-exclusive domains (v4)")
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
'addr' that contains RAS UE register address is re-assigned to
RAS_CAP_CONTROL offset if there are multiple UE errors. Use different addr
variable to avoid the reassignment mistake.
Fixes: 2905cb5236cb ("cxl/pci: Add (hopeful) error handling support")
Reported-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Link: https://lore.kernel.org/r/167302318779.580155.15233596744650706167.stgit@djiang5-mobl3.local
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
If worker creation fails, nullify the event_thread->worker, so that
msm_drm_uninit() doesn't try accessing invalid memory location. While we
are at it, remove duplicate assignment to the ret variable.
Fixes: 1041dee2178f ("drm/msm: use kthread_create_worker instead of kthread_run")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/490106/
Link: https://lore.kernel.org/r/20220617233328.1143665-2-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
Add support for the 1080x2400 Visionox VTDR6130 AMOLED DSI panel
found on the Qualcomm SM8550 MTP board.
By default the the panel is configured to work with DSI compressed
streams, but can work in uncompressed video mode since 1080x2400 in
RGB888 fits in the 4 DSI lanes bandwidth.
While display compression is preferred for performance and power
reasons, let's start with the uncompressed video mode support and
add the DSC support later on.
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
[narmstrong: moved drm/display/ include file before drm/drm_]
Link: https://patchwork.freedesktop.org/patch/msgid/20230103-topic-sm8550-upstream-vtdr6130-panel-v2-2-dd6200f47a76@linaro.org
|
|
gem_context_register() makes the context visible to userspace, and which
point a separate thread can trigger the I915_GEM_CONTEXT_DESTROY ioctl.
So we need to ensure that nothing uses the ctx ptr after this. And we
need to ensure that adding the ctx to the xarray is the *last* thing
that gem_context_register() does with the ctx pointer.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Fixes: eb4dedae920a ("drm/i915/gem: Delay tracking the GEM context until it is registered")
Fixes: a4c1cdd34e2c ("drm/i915/gem: Delay context creation (v3)")
Fixes: 49bd54b390c2 ("drm/i915: Track all user contexts per client")
Cc: <stable@vger.kernel.org> # v5.10+
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
[tursulin: Stable and fixes tags add/tidy.]
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230103234948.1218393-1-robdclark@gmail.com
(cherry picked from commit bed4b455cf5374e68879be56971c1da563bcd90c)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
A nested dma_resv_reserve_fences(1) will not reserve slot from the
2nd call onwards and folowing dma_resv_add_fence() might hit the
"BUG_ON(fobj->num_fences >= fobj->max_fences)" check.
I915 hit above nested dma_resv case in ttm_bo_handle_move_mem() with
async unbind:
dma_resv_reserve_fences() from --> ttm_bo_handle_move_mem()
dma_resv_reserve_fences() from --> i915_vma_unbind_async()
dma_resv_add_fence() from --> i915_vma_unbind_async()
dma_resv_add_fence() from -->ttm_bo_move_accel_cleanup()
Resolve this by adding an extra fence in i915_vma_unbind_async().
Suggested-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Fixes: 2f6b90da9192 ("drm/i915: Use vma resources for async unbinding")
Cc: <stable@vger.kernel.org> # v5.18+
Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221223092011.11657-1-nirmoy.das@intel.com
(cherry picked from commit 4f0755c2faf7388616109717facc5bbde6850e60)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
During boot of I2SE Duckbill the kernel log contains a
confusing error:
Failed to request dma
This is caused by i2c-mxs tries to request a not yet available DMA
channel (-EPROBE_DEFER). So suppress this message by using
dev_err_probe().
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
Add additional supported PCI IDs for latest AMD NAVI GPU card which
has an integrated Type-C controller and designware I2C with PCI
interface.
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Tested-by: Sanath S <Sanath.S@amd.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
If you create MRs more than 0x10000 times after loading the module,
responder starts to reply NAKs for RDMA/Atomic operations because of rkey
violation detected in check_rkey(). The root cause is that rkeys are
incremented each time a new MR is created and the value overflows into the
range reserved for MWs.
This commit also increases the value of RXE_MAX_MW that has been limited
unlike other parameters.
Fixes: 0994a1bcd5f7 ("RDMA/rxe: Bump up default maximum values used via uverbs")
Link: https://lore.kernel.org/r/20221220080848.253785-2-matsuda-daisuke@fujitsu.com
Signed-off-by: Daisuke Matsuda <matsuda-daisuke@fujitsu.com>
Tested-by: Li Zhijian <lizhijian@fujitsu.com>
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
ibv_query_device() has reported incorrect device attributes, which are
actually not used by the device. Make the constants correspond with the
attributes shown to users.
Fixes: 3ccffe8abf2f ("RDMA/rxe: Move max_elem into rxe_type_info")
Fixes: 3225717f6dfa ("RDMA/rxe: Replace red-black trees by xarrays")
Link: https://lore.kernel.org/r/20221220080848.253785-1-matsuda-daisuke@fujitsu.com
Signed-off-by: Daisuke Matsuda <matsuda-daisuke@fujitsu.com>
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
The VEC is able to output progressive analog modes, but the driver has
never set the proper bit to do so.
Signed-off-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Link: https://lore.kernel.org/r/20221207-rpi-hvs-crtc-misc-v1-15-1f8e0770798b@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
|
|
The back porch timings were correct, only the sync offset was wrong.
Correct timing is now reported for 1080i and 576i, but the h offset is
incorrect for 480i for non-obvious reasons.
Fixes: fb10dc451c0f ("drm/vc4: hdmi: Correct HDMI timing registers for interlaced modes")
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://lore.kernel.org/r/20221207-rpi-hvs-crtc-misc-v1-14-1f8e0770798b@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
|
|
This commit fixes vertical timings of the VEC (composite output) modes
to accurately represent the 525-line ("NTSC") and 625-line ("PAL") ITU-R
standards.
Previous timings were actually defined as 502 and 601 lines, resulting
in non-standard 62.69 Hz and 52 Hz signals being generated,
respectively.
Changes to vc4_crtc.c have also been made, to make the PixelValve
vertical timings accurately correspond to the DRM modeline in interlaced
modes. The resulting VERTA/VERTB register values have been verified
against the reference values set by the Raspberry Pi firmware.
Signed-off-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Link: https://lore.kernel.org/r/20221207-rpi-hvs-crtc-misc-v1-13-1f8e0770798b@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
|
|
The HVS_PIXEL_ORDER_xxx defines apply to specific HVS_PIXEL_FORMAT_xxx
modes, so add comments to make this obvious.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://lore.kernel.org/r/20221207-rpi-hvs-crtc-misc-v1-12-1f8e0770798b@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
|
|
The hardware supports the 332 8bpp and 4:4:4:4 16bpp formats,
but the table of supported formats didn't include them.
Add them in.
In theory they are supported for T-format as well as linear,
but without a way to test them just add them as linear for now.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://lore.kernel.org/r/20221207-rpi-hvs-crtc-misc-v1-11-1f8e0770798b@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
|
|
pixel_order is used for the earlier versions of the HVS, so is
redundant on the 10:10:10:2 and 10bit YUV formats that are only
supported on HVS5.
Remove the assignment from the table to avoid confusion.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://lore.kernel.org/r/20221207-rpi-hvs-crtc-misc-v1-10-1f8e0770798b@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
|
|
vc4_plane_mode_set for HVS5 was using pixel_order unless pixel_order_hvs5
was non-zero, except 0 is a valid value for the pixel_order.
Specify pixel_order_hvs5 for all formats and remove the conditional.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://lore.kernel.org/r/20221207-rpi-hvs-crtc-misc-v1-9-1f8e0770798b@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
|
|
atomic_flush will be called for each CRTC even if they aren't enabled.
The whole code we have there will thus run without a properly affected
channel, which can then result in all sorts of weird behaviour.
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://lore.kernel.org/r/20221207-rpi-hvs-crtc-misc-v1-8-1f8e0770798b@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
|
|
HVS5 supports the 210101010 RGB[A|X] formats, but they were
missing from the DRM to HVS mapping list, so weren't available.
Add them in.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://lore.kernel.org/r/20221207-rpi-hvs-crtc-misc-v1-7-1f8e0770798b@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
|
|
Same as the xRGB8888 formats, HVS5 has managed to swap the colour
channels for the xRGB1555 formats as well. Add the relevant
config for pixel_order_hvs5.
Fixes: c54619b0bfb3 ("drm/vc4: Add support for the BCM2711 HVS5")
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://lore.kernel.org/r/20221207-rpi-hvs-crtc-misc-v1-6-1f8e0770798b@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
|
|
Adds the zpos property to all planes, and creates the dlist
by placing the fragments in the correct order based on zpos.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://lore.kernel.org/r/20221207-rpi-hvs-crtc-misc-v1-5-1f8e0770798b@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
|
|
HVS5 has moved the interrupt enable bits around within the
DISPCTRL register, therefore the configuration has to be updated
to account for this.
Fixes: c54619b0bfb3 ("drm/vc4: Add support for the BCM2711 HVS5")
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://lore.kernel.org/r/20221207-rpi-hvs-crtc-misc-v1-4-1f8e0770798b@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
|
|
The bit used for SCALER_DISPBKGND_AUTOHS in SCALER_DISPBKGNDX
has been repurposed on HVS5 to configure whether a display can
win back-to-back arbitration wins for the COB.
This is not desirable, therefore only select this bit on HVS4,
and explicitly clear it on HVS5.
Fixes: c54619b0bfb3 ("drm/vc4: Add support for the BCM2711 HVS5")
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://lore.kernel.org/r/20221207-rpi-hvs-crtc-misc-v1-3-1f8e0770798b@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
|
|
The HVS can change AXI request mode based on how full the COB
FIFOs are.
Until now the vc4 driver has been relying on the firmware to
have set these to sensible values.
With HVS channel 2 now being used for live video, change the
panic mode for all channels to be explicitly set by the driver,
and the same for all channels.
Fixes: c54619b0bfb3 ("drm/vc4: Add support for the BCM2711 HVS5")
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://lore.kernel.org/r/20221207-rpi-hvs-crtc-misc-v1-2-1f8e0770798b@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
|
|
The HVS Composite Output Buffer (COB) is the memory used to
generate the output pixel data.
Until now the vc4 driver has been relying on the firmware to
have set these to sensible values.
In testing triple screen support it has been noted that only
1 line was being assigned to HVS channel 2. Whilst that is fine
for the transposer (TXP), and indeed needed as only some pixels
have an alpha channel, it is insufficient to run a live display.
Split the COB more evenly between the 3 HVS channels.
Fixes: c54619b0bfb3 ("drm/vc4: Add support for the BCM2711 HVS5")
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://lore.kernel.org/r/20221207-rpi-hvs-crtc-misc-v1-1-1f8e0770798b@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
|
|
We now accept timeslots param exactly how the variable
sounds: amount of timeslots, but not ratio timeslots/64.
So for SST case(when we have all timeslots for use), it
should be 64, but not 1.
This caused some issues in the tests.
v2: Fixed comments
References: https://gitlab.freedesktop.org/drm/intel/-/issues/6860
Fixes: 52f14682ac4d ("drm/i915: Bpp/timeslot calculation fixes for DP MST DSC")
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230109140210.25822-1-stanislav.lisovskiy@intel.com
|
|
Helper replaces common sequence of calls.
Signed-off-by: Andrzej Hajda <andrzej.hajda@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221213121951.1515023-2-andrzej.hajda@intel.com
|
|
There is no need to use _i915_vma_move_to_active.
No functional changes.
Signed-off-by: Andrzej Hajda <andrzej.hajda@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221213121951.1515023-1-andrzej.hajda@intel.com
|
|
Ensure that i2c_mark_adapter_suspended() is always balanced by a call to
i2c_mark_adapter_resumed().
dw_i2c_plat_resume() must always be called, so that
i2c_mark_adapter_resumed() is called. This is not compatible with
DPM_FLAG_MAY_SKIP_RESUME, so remove the flag.
Since the controller is always resumed on system resume the
dw_i2c_plat_complete() callback is redundant and has been removed.
The unbalanced suspended flag was introduced by commit c57813b8b288
("i2c: designware: Lock the adapter while setting the suspended flag")
Before that commit, the system and runtime PM used the same functions. The
DPM_FLAG_MAY_SKIP_RESUME was used to skip the system resume if the driver
had been in runtime-suspend. If system resume was skipped, the suspended
flag would be cleared by the next runtime resume. The check of the
suspended flag was _after_ the call to pm_runtime_get_sync() in
i2c_dw_xfer(). So either a system resume or a runtime resume would clear
the flag before it was checked.
Having introduced the unbalanced suspended flag with that commit, a further
commit 80704a84a9f8
("i2c: designware: Use the i2c_mark_adapter_suspended/resumed() helpers")
changed from using a local suspended flag to using the
i2c_mark_adapter_suspended/resumed() functions. These use a flag that is
checked by I2C core code before issuing the transfer to the bus driver, so
there was no opportunity for the bus driver to runtime resume itself before
the flag check.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: c57813b8b288 ("i2c: designware: Lock the adapter while setting the suspended flag")
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
In functions i2c_dw_scl_lcnt() and i2c_dw_scl_hcnt() may have overflow
by depending on the values of the given parameters including the ic_clk.
For example in our use case where ic_clk is larger than one million,
multiplication of ic_clk * 4700 will result in 32 bit overflow.
Add cast of u64 to the calculation to avoid multiplication overflow, and
use the corresponding define for divide.
Fixes: 2373f6b9744d ("i2c-designware: split of i2c-designware.c into core and bus specific parts")
Signed-off-by: Lareine Khawaly <lareine@amazon.com>
Signed-off-by: Hanna Hawa <hhhawa@amazon.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
When firmware connection manager is in use we should not touch the lane
adapter (well or any) configuration space so do this only when we know
that the software connection manager is active.
Fixes: 8e1de7042596 ("thunderbolt: Add support for XDomain lane bonding")
Cc: stable@vger.kernel.org
Acked-by: Yehezkel Bernat <YehezkelShB@gmail.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
We need to take minimum of both sides of the USB3 link into consideration,
not just the downstream port. Fix this by calling tb_usb3_max_link_rate()
instead.
Fixes: 0bd680cd900c ("thunderbolt: Add USB3 bandwidth management")
Cc: stable@vger.kernel.org
Acked-by: Yehezkel Bernat <YehezkelShB@gmail.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
We cannot call PM runtime functions in tb_retimer_scan() because it will
also be called when retimers are scanned from userspace (happens when
there is no device connected on ChromeOS for instance) and at the same
USB4 port runtime resume hook. This leads to hang because neither can
proceed.
Fix this by runtime resuming USB4 ports in tb_scan_port() instead. This
makes sure the ports are runtime PM active when retimers are added under
it while avoiding the reported hang as well.
Reported-by: Utkarsh Patel <utkarsh.h.patel@intel.com>
Fixes: 1e56c88adecc ("thunderbolt: Runtime resume USB4 port when retimers are scanned")
Cc: stable@vger.kernel.org
Acked-by: Yehezkel Bernat <YehezkelShB@gmail.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
The blamed commit implemented the vcap_operations to allow to add an
entry in the TCAM. One of the callbacks is to validate the supported
keysets. If the TCAM lookup was not enabled, then this will return
failure so no entries could be added.
This doesn't make much sense, as you can enable at a later point the
TCAM. Therefore change it such to allow entries in TCAM even it is not
enabled.
Fixes: 4426b78c626d ("net: lan966x: Add port keyset config and callback interface")
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Fix a use-after-free that occurs in hcd when in_urb sent from
pn533_usb_send_frame() is completed earlier than out_urb. Its callback
frees the skb data in pn533_send_async_complete() that is used as a
transfer buffer of out_urb. Wait before sending in_urb until the
callback of out_urb is called. To modify the callback of out_urb alone,
separate the complete function of out_urb and ack_urb.
Found by a modified version of syzkaller.
BUG: KASAN: use-after-free in dummy_timer
Call Trace:
memcpy (mm/kasan/shadow.c:65)
dummy_perform_transfer (drivers/usb/gadget/udc/dummy_hcd.c:1352)
transfer (drivers/usb/gadget/udc/dummy_hcd.c:1453)
dummy_timer (drivers/usb/gadget/udc/dummy_hcd.c:1972)
arch_static_branch (arch/x86/include/asm/jump_label.h:27)
static_key_false (include/linux/jump_label.h:207)
timer_expire_exit (include/trace/events/timer.h:127)
call_timer_fn (kernel/time/timer.c:1475)
expire_timers (kernel/time/timer.c:1519)
__run_timers (kernel/time/timer.c:1790)
run_timer_softirq (kernel/time/timer.c:1803)
Fixes: c46ee38620a2 ("NFC: pn533: add NXP pn533 nfc device driver")
Signed-off-by: Minsuk Kang <linuxlovemin@yonsei.ac.kr>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Zero-length arrays are deprecated[1]. Replace struct
mlxsw_sp_nexthop_group_info's "nexthops" 0-length array with a flexible
array. Detected with GCC 13, using -fstrict-flex-arrays=3:
drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c: In function 'mlxsw_sp_nexthop_group_hash_obj':
drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c:3278:38: warning: array subscript i is outside array bounds of 'struct mlxsw_sp_nexthop[0]' [-Warray-bounds=]
3278 | val ^= jhash(&nh->ifindex, sizeof(nh->ifindex), seed);
| ^~~~~~~~~~~~
drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c:2954:33: note: while referencing 'nexthops'
2954 | struct mlxsw_sp_nexthop nexthops[0];
| ^~~~~~~~
[1] https://www.kernel.org/doc/html/latest/process/deprecated.html#zero-length-and-one-element-arrays
Cc: Ido Schimmel <idosch@nvidia.com>
Cc: Petr Machata <petrm@nvidia.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: "Gustavo A. R. Silva" <gustavoars@kernel.org>
Cc: netdev@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Tested-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Commit b310de784bacd ("net: ipa: add IPA v4.7 support") was merged
despite an unresolved comment made by Konrad Dybcio. Konrad
observed that the IMEM region specified for IPA v4.7 did not match
that used downstream for the SM7225 SoC. In "lagoon.dtsi" present
in a Sony Xperia source tree, a ipa_smmu_ap node was defined with a
"qcom,additional-mapping" property that defined the IPA IMEM area
starting at offset 0x146a8000 (not 0x146a9000 that was committed).
The IPA v4.7 target system used for testing uses the SM7225 SoC, so
we'll adhere what the downstream code specifies is the address of
the IMEM region used for IPA.
Link: https://lore.kernel.org/linux-arm-msm/20221208211529.757669-1-elder@linaro.org
Fixes: b310de784bac ("net: ipa: add IPA v4.7 support")
Tested-by: Luca Weiss <luca.weiss@fairphone.com>
Signed-off-by: Alex Elder <elder@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The introduction of support for Apple board types inadvertently changed
the precedence order, causing hybrid SMBIOS+DT platforms to look up the
firmware using the DMI information instead of the device tree compatible
to generate the board type. Revert back to the old behavior,
as affected platforms use firmwares named after the DT compatible.
Fixes: 7682de8b3351 ("wifi: brcmfmac: of: Fetch Apple properties")
[1] https://bugzilla.opensuse.org/show_bug.cgi?id=1206697#c13
Cc: stable@vger.kernel.org
Signed-off-by: Ivan T. Ivanov <iivanov@suse.de>
Reviewed-by: Hector Martin <marcan@marcan.st>
Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Tested-by: Peter Robinson <pbrobinson@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Data buffer for active map is allocated in alloc_active_ring and freed
in free_active_ring function, which is used only for the error
cleanup. pvcalls_front_release is calling pvcalls_front_free_map which
ends foreign access for this buffer, but doesn't free allocated pages.
Call free_active_ring to clean all allocated resources.
Signed-off-by: Oleksii Moisieiev <oleksii_moisieiev@epam.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Link: https://lore.kernel.org/r/6a762ee32dd655cbb09a4aa0e2307e8919761311.1671531297.git.oleksii_moisieiev@epam.com
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
The currently lockless access to the xen console list in
vtermno_to_xencons() is incorrect, as additions and removals from the
list can happen anytime, and as such the traversal of the list to get
the private console data for a given termno needs to happen with the
lock held. Note users that modify the list already do so with the
lock taken.
Adjust current lock takers to use the _irq{save,restore} helpers,
since the context in which vtermno_to_xencons() is called can have
interrupts disabled. Use the _irq{save,restore} set of helpers to
switch the current callers to disable interrupts in the locked region.
I haven't checked if existing users could instead use the _irq
variant, as I think it's safer to use _irq{save,restore} upfront.
While there switch from using list_for_each_entry_safe to
list_for_each_entry: the current entry cursor won't be removed as
part of the code in the loop body, so using the _safe variant is
pointless.
Fixes: 02e19f9c7cac ('hvc_xen: implement multiconsole support')
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Link: https://lore.kernel.org/r/20221130163611.14686-1-roger.pau@citrix.com
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
Stop using deprecated drm_handle_vblank(), use drm_crtc_handle_vblank()
instead.
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/490108/
Link: https://lore.kernel.org/r/20220617233328.1143665-4-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
