summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2023-01-12drm/msm/dpu: Add SM8350 to hw catalogRobert Foss
Add compatibility for SM8350 display subsystem, including required entries in DPU hw catalog. Signed-off-by: Robert Foss <robert.foss@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/516340/ Link: https://lore.kernel.org/r/20221230153554.105856-4-robert.foss@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-01-12drm/msm: mdss add support for SM8450Dmitry Baryshkov
Add support for the MDSS block on SM8450 platform. Tested-by: Vinod Koul <vkoul@kernel.org> Reviewed-by: Vinod Koul <vkoul@kernel.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/514247/ Link: https://lore.kernel.org/r/20221207012231.112059-12-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-01-12drm/msm/dpu: add support for SM8450Dmitry Baryshkov
Add definitions for the display hardware used on Qualcomm SM8450 platform. Tested-by: Vinod Koul <vkoul@kernel.org> Reviewed-by: Vinod Koul <vkoul@kernel.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/514235/ Link: https://lore.kernel.org/r/20221207012231.112059-11-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-01-12drm/msm/dpu: add support for MDP_TOP blackholeDmitry Baryshkov
On sm8450 a register block was removed from MDP TOP. Accessing it during snapshotting results in NoC errors / immediate reboot. Skip accessing these registers during snapshot. Tested-by: Vinod Koul <vkoul@kernel.org> Reviewed-by: Vinod Koul <vkoul@kernel.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/514239/ Link: https://lore.kernel.org/r/20221207012231.112059-10-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-01-12drm/msm/dpu: merge all MDP TOP registers to dpu_hwio.hDmitry Baryshkov
There is a separate header containing some of MDP TOP register definitions, dpu_hwio.h. Move missing register definitions from dpu_hw_top.c to the mentioned header. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/514242/ Link: https://lore.kernel.org/r/20221207012231.112059-9-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-01-12platform/x86: int3472/discrete: Ensure the clk/power enable pins are in ↵Hans de Goede
output mode acpi_get_and_request_gpiod() does not take a gpio_lookup_flags argument specifying that the pins direction should be initialized to a specific value. This means that in some cases the pins might be left in input mode, causing the gpiod_set() calls made to enable the clk / regulator to not work. One example of this problem is the clk-enable GPIO for the ov01a1s sensor on a Dell Latitude 9420 being left in input mode causing the clk to never get enabled. Explicitly set the direction of the pins to output to fix this. Fixes: 5de691bffe57 ("platform/x86: Add intel_skl_int3472 driver") Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Andy Shevchenko <andy@kernel.org> Reviewed-by: Daniel Scally <djrscally@gmail.com> Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com> Link: https://lore.kernel.org/r/20230111201426.947853-1-hdegoede@redhat.com
2023-01-12platform/x86/amd: Fix refcount leak in amd_pmc_probeMiaoqian Lin
pci_get_domain_bus_and_slot() takes reference, the caller should release the reference by calling pci_dev_put() after use. Call pci_dev_put() in the error path to fix this. Fixes: 3d7d407dfb05 ("platform/x86: amd-pmc: Add support for AMD Spill to DRAM STB feature") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Link: https://lore.kernel.org/r/20221229072534.1381432-1-linmq006@gmail.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2023-01-12platform/x86: intel/pmc/core: Add Meteor Lake mobile supportGayatri Kammela
Add Meteor Lake mobile support to pmc core driver. Meteor Lake mobile parts reuse all the Meteor Lake PCH IPs. Cc: David E Box <david.e.box@linux.intel.com> Signed-off-by: Gayatri Kammela <gayatri.kammela@linux.intel.com> Link: https://lore.kernel.org/r/20221228230553.2497183-1-gayatri.kammela@linux.intel.com Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2023-01-12platform/x86: simatic-ipc: add another modelHenning Schild
Add IPC PX-39A support. Signed-off-by: Henning Schild <henning.schild@siemens.com> Link: https://lore.kernel.org/r/20221222103720.8546-3-henning.schild@siemens.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2023-01-12platform/x86: simatic-ipc: correct name of a modelHenning Schild
What we called IPC427G should be renamed to BX-39A to be more in line with the actual product name. Signed-off-by: Henning Schild <henning.schild@siemens.com> Link: https://lore.kernel.org/r/20221222103720.8546-2-henning.schild@siemens.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2023-01-12md: fix incorrect declaration about claim_rdev in md_import_deviceAdrian Huang
Commit fb541ca4c365 ("md: remove lock_bdev / unlock_bdev") removes wrappers for blkdev_get/blkdev_put. However, the uninitialized local static variable of pointer type 'claim_rdev' in md_import_device() is NULL, which leads to the following warning call trace: WARNING: CPU: 22 PID: 1037 at block/bdev.c:577 bd_prepare_to_claim+0x131/0x150 CPU: 22 PID: 1037 Comm: mdadm Not tainted 6.2.0-rc3+ #69 .. RIP: 0010:bd_prepare_to_claim+0x131/0x150 .. Call Trace: <TASK> ? _raw_spin_unlock+0x15/0x30 ? iput+0x6a/0x220 blkdev_get_by_dev.part.0+0x4b/0x300 md_import_device+0x126/0x1d0 new_dev_store+0x184/0x240 md_attr_store+0x80/0xf0 kernfs_fop_write_iter+0x128/0x1c0 vfs_write+0x2be/0x3c0 ksys_write+0x5f/0xe0 do_syscall_64+0x38/0x90 entry_SYSCALL_64_after_hwframe+0x72/0xdc It turns out the md device cannot be used: md: could not open device unknown-block(259,0). md: md127 stopped. Fix the issue by declaring the local static variable of struct type and passing the pointer of the variable to blkdev_get_by_dev(). Fixes: fb541ca4c365 ("md: remove lock_bdev / unlock_bdev") Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Adrian Huang <ahuang12@lenovo.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Song Liu <song@kernel.org>
2023-01-12platform/x86: dell-privacy: Only register SW_CAMERA_LENS_COVER if presentHans de Goede
Unlike keys where userspace only reacts to keypresses, userspace may act on switches in both (0 and 1) of their positions. For example if a SW_TABLET_MODE switch is registered then GNOME will not automatically show the onscreen keyboard when a text field gets focus on touchscreen devices when SW_TABLET_MODE reports 0 and when SW_TABLET_MODE reports 1 libinput will block (filter out) builtin keyboard and touchpad events. So to avoid unwanted side-effects EV_SW type inputs should only be registered if they are actually present, only register SW_CAMERA_LENS_COVER if it is actually there. Fixes: 8af9fa37b8a3 ("platform/x86: dell-privacy: Add support for Dell hardware privacy") Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20221221220724.119594-2-hdegoede@redhat.com
2023-01-12platform/x86: dell-privacy: Fix SW_CAMERA_LENS_COVER reportingHans de Goede
Use KE_VSW instead of KE_SW for the SW_CAMERA_LENS_COVER key_entry and get the value of the switch from the status field when handling SW_CAMERA_LENS_COVER events, instead of always reporting 0. Also correctly set the initial SW_CAMERA_LENS_COVER value. Fixes: 8af9fa37b8a3 ("platform/x86: dell-privacy: Add support for Dell hardware privacy") Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20221221220724.119594-1-hdegoede@redhat.com
2023-01-12platform/x86: asus-wmi: Don't load fan curves without fanThomas Weißschuh
If we do not have a fan it does not make sense to load curves for it. This removes the following warnings from the kernel log: asus_wmi: fan_curve_get_factory_default (0x00110024) failed: -19 asus_wmi: fan_curve_get_factory_default (0x00110025) failed: -19 Fixes: a2bdf10ce96e ("platform/x86: asus-wmi: Increase FAN_CURVE_BUF_LEN to 32") Signed-off-by: Thomas Weißschuh <linux@weissschuh.net> Link: https://lore.kernel.org/r/20221221-asus-fan-v1-3-e07f3949725b@weissschuh.net Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2023-01-12platform/x86: asus-wmi: Ignore fan on E410MAThomas Weißschuh
The ASUS VivoBook has a fan device described in its ACPI tables but does not actually contain any physical fan. Use the quirk to inhibit fan handling. Signed-off-by: Thomas Weißschuh <linux@weissschuh.net> Link: https://lore.kernel.org/r/20221221-asus-fan-v1-2-e07f3949725b@weissschuh.net Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2023-01-12platform/x86: asus-wmi: Add quirk wmi_ignore_fanThomas Weißschuh
Some laptops have a fan device listed in their ACPI tables but do not actually contain a fan. Introduce a quirk that can be used to override the fan detection logic. This was observed with a ASUS VivoBook E410MA running firmware E410MAB.304. Signed-off-by: Thomas Weißschuh <linux@weissschuh.net> Link: https://lore.kernel.org/r/20221221-asus-fan-v1-1-e07f3949725b@weissschuh.net Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2023-01-13phy: renesas: r8a779f0-eth-serdes: Fix register settingYoshihiro Shimoda
Fix register setting which is typo in r8a779f0_eth_serdes_chan_setting(). Fixes: 742859441d44 ("phy: renesas: Add Renesas Ethernet SERDES driver for R-Car S4-8") Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/20221226064216.3895421-1-yoshihiro.shimoda.uh@renesas.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-01-12platform/x86: asus-nb-wmi: Add alternate mapping for KEY_SCREENLOCKHans de Goede
The 0x33 keycode is emitted by Fn + F6 on a ASUS FX705GE laptop. Reported-by: Nemcev Aleksey <Nemcev_Aleksey@inbox.ru> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20230112181841.84652-1-hdegoede@redhat.com
2023-01-12platform/x86: asus-nb-wmi: Add alternate mapping for KEY_CAMERAThomas Weißschuh
This keycode is emitted on a Asus VivoBook E410MAB with firmware E410MAB.304. The physical key has a strikken-through camera printed on it. Signed-off-by: Thomas Weißschuh <linux@weissschuh.net> Link: https://lore.kernel.org/r/20221216-asus-key-v1-1-45da124119a3@weissschuh.net Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2023-01-12drm/i915/display: Check source height is > 0Drew Davenport
The error message suggests that the height of the src rect must be at least 1. Reject source with height of 0. Cc: stable@vger.kernel.org Signed-off-by: Drew Davenport <ddavenport@chromium.org> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221226225246.1.I15dff7bb5a0e485c862eae61a69096caf12ef29f@changeid
2023-01-12phy: usb: sunplus: Fix potential null-ptr-deref in sp_usb_phy_probe()Shang XiaoJing
sp_usb_phy_probe() will call platform_get_resource_byname() that may fail and return NULL. devm_ioremap() will use usbphy->moon4_res_mem->start as input, which may causes null-ptr-deref. Check the ret value of platform_get_resource_byname() to avoid the null-ptr-deref. Fixes: 99d9ccd97385 ("phy: usb: Add USB2.0 phy driver for Sunplus SP7021") Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com> Link: https://lore.kernel.org/r/20221125021222.25687-1-shangxiaojing@huawei.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-01-12platform/surface: aggregator: Add missing call to ssam_request_sync_free()Maximilian Luz
Although rare, ssam_request_sync_init() can fail. In that case, the request should be freed via ssam_request_sync_free(). Currently it is leaked instead. Fix this. Fixes: c167b9c7e3d6 ("platform/surface: Add Surface Aggregator subsystem") Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com> Link: https://lore.kernel.org/r/20221220175608.1436273-1-luzmaximilian@gmail.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2023-01-12platform/surface: aggregator: Ignore command messages not intended for usMaximilian Luz
It is possible that we (the host/kernel driver) receive command messages that are not intended for us. Ignore those for now. The whole story is a bit more complicated: It is possible to enable debug output on SAM, which is sent via SSH command messages. By default this output is sent to a debug connector, with its own target ID (TID=0x03). It is possible to override the target of the debug output and set it to the host/kernel driver. This, however, does not change the original target ID of the message. Meaning, we receive messages with TID=0x03 (debug) but expect to only receive messages with TID=0x00 (host). The problem is that the different target ID also comes with a different scope of request IDs. In particular, these do not follow the standard event rules (i.e. do not fall into a set of small reserved values). Therefore, current message handling interprets them as responses to pending requests and tries to match them up via the request ID. However, these debug output messages are not in fact responses, and therefore this will at best fail to find the request and at worst pass on the wrong data as response for a request. Therefore ignore any command messages not intended for us (host) for now. We can implement support for the debug messages once we have a better understanding of them. Note that this may also provide a bit more stability and avoid some driver confusion in case any other targets want to talk to us in the future, since we don't yet know what to do with those as well. A warning for the dropped messages should suffice for now and also give us a chance of discovering new targets if they come along without any potential for bugs/instabilities. Fixes: c167b9c7e3d6 ("platform/surface: Add Surface Aggregator subsystem") Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com> Link: https://lore.kernel.org/r/20221202223327.690880-2-luzmaximilian@gmail.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2023-01-12platform/x86: touchscreen_dmi: Add info for the CSL Panther Tab HDMichael Klein
Add touchscreen info for the CSL Panther Tab HD. Signed-off-by: Michael Klein <m.klein@mvz-labor-lb.de> Link: https://lore.kernel.org/r/20221220121103.uiwn5l7fii2iggct@LLGMVZLB-0037 Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2023-01-12USB: serial: option: add Quectel EM05-G (GR) modemDuke Xin(辛安文)
The EM05-G (GR) modem has 2 USB configurations that are configurable via the AT command AT+QCFG="usbnet",[ 0 | 2 ] which make the modem enumerate with the following interfaces, respectively: "RMNET" : AT + DIAG + NMEA + Modem + QMI "MBIM" : MBIM + AT + DIAG + NMEA + Modem The detailed description of the USB configuration for each mode as follows: RMNET Mode -------------- T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 21 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=0313 Rev= 3.18 S: Manufacturer=Quectel S: Product=Quectel EM05-G C:* #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 6 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=89(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms MBIM Mode -------------- T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 16 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=0313 Rev= 3.18 S: Manufacturer=Quectel S: Product=Quectel EM05-G C:* #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA A: FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=0e Prot=00 I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0e Prot=00 Driver=cdc_mbim E: Ad=89(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Duke Xin(辛安文) <duke_xinanwen@163.com> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org>
2023-01-12USB: serial: option: add Quectel EM05-G (CS) modemDuke Xin(辛安文)
The EM05-G (CS) modem has 2 USB configurations that are configurable via the AT command AT+QCFG="usbnet",[ 0 | 2 ] which make the modem enumerate with the following interfaces, respectively: "RMNET" : AT + DIAG + NMEA + Modem + QMI "MBIM" : MBIM + AT + DIAG + NMEA + Modem The detailed description of the USB configuration for each mode as follows: RMNET Mode -------------- T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 21 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=030C Rev= 3.18 S: Manufacturer=Quectel S: Product=Quectel EM05-G C:* #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 6 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=89(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms MBIM Mode -------------- T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 16 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=030C Rev= 3.18 S: Manufacturer=Quectel S: Product=Quectel EM05-G C:* #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA A: FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=0e Prot=00 I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0e Prot=00 Driver=cdc_mbim E: Ad=89(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Duke Xin(辛安文) <duke_xinanwen@163.com> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org>
2023-01-12r8152: add vendor/device ID pair for Microsoft DevkitAndre Przywara
The Microsoft Devkit 2023 is a an ARM64 based machine featuring a Realtek 8153 USB3.0-to-GBit Ethernet adapter. As in their other machines, Microsoft uses a custom USB device ID. Add the respective ID values to the driver. This makes Ethernet work on the MS Devkit device. The chip has been visually confirmed to be a RTL8153. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Link: https://lore.kernel.org/r/20230111133228.190801-1-andre.przywara@arm.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-01-12drm/vc4: bo: Fix drmm_mutex_init memory hogMaxime Ripard
Commit 374146cad469 ("drm/vc4: Switch to drmm_mutex_init") converted, among other functions, vc4_create_object() to use drmm_mutex_init(). However, that function is used to allocate a BO, and therefore the mutex needs to be freed much sooner than when the DRM device is removed from the system. For each buffer allocation we thus end up allocating a small structure as part of the DRM-managed mechanism that is never freed, eventually leading us to no longer having any free memory anymore. Let's switch back to mutex_init/mutex_destroy to deal with it properly. Fixes: 374146cad469 ("drm/vc4: Switch to drmm_mutex_init") Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20230112091243.490799-1-maxime@cerno.tech
2023-01-12drm: Optimize drm buddy top-down allocation methodArunpravin Paneer Selvam
We are observing performance drop in many usecases which include games, 3D benchmark applications,etc.. To solve this problem, We are strictly not allowing top down flag enabled allocations to steal the memory space from cpu visible region. The idea is, we are sorting each order list entries in ascending order and compare the last entry of each order list in the freelist and return the max block. This patch improves the 3D benchmark scores and solves fragmentation issues. All drm buddy selftests are verfied. drm_buddy: pass:6 fail:0 skip:0 total:6 Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230112120027.3072-1-Arunpravin.PaneerSelvam@amd.com Signed-off-by: Christian König <christian.koenig@amd.com> CC: Cc: stable@vger.kernel.org # 5.18+
2023-01-12drm/ttm: Fix a regression causing kernel oops'esZack Rusin
The branch is explicitly taken if ttm == NULL which means that to avoid a null pointer reference the ttm object can not be used inside. Switch back to dst_mem to avoid kernel oops'es. This fixes kernel oops'es with any buffer objects which don't have ttm_tt, e.g. with vram based screen objects on vmwgfx. Signed-off-by: Zack Rusin <zackr@vmware.com> Fixes: e3c92eb4a84f ("drm/ttm: rework on ttm_resource to use size_t type") Cc: Somalapuram Amaranath <Amaranath.Somalapuram@amd.com> Cc: Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230111175015.1134923-1-zack@kde.org Signed-off-by: Christian König <christian.koenig@amd.com>
2023-01-12Merge tag 'spi-fix-v6.2-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi fixes from Mark Brown: - Fixes for long standing issues with accesses to spidev->spi during teardown in the spidev userspace driver. - Rename the newly added spi-cs-setup-ns DT property to be more in line with our other delay properties before it becomes ABI. - A few driver specific fixes. * tag 'spi-fix-v6.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: spi: spidev: remove debug messages that access spidev->spi without locking spi: spidev: fix a race condition when accessing spidev->spi spi: Rename spi-cs-setup-ns property to spi-cs-setup-delay-ns spi: dt-bindings: Rename spi-cs-setup-ns to spi-cs-setup-delay-ns spi: cadence: Fix busy cycles calculation spi: mediatek: Enable irq before the spi registration
2023-01-12Merge tag 'regulator-fix-v6.2-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator Pull regulator fixes from Mark Brown: "A couple of small driver specific fixes, one of which I queued for 6.1 but didn't actually send out so has had *plenty* of testing in -next" * tag 'regulator-fix-v6.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: regulator: qcom-rpmh: PM8550 ldo11 regulator is an nldo regulator: da9211: Use irq handler when ready
2023-01-12Merge tag 'mtd/fixes-for-6.2-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux Pull MTD fixes from Miquel Raynal: - cfi: Allow building spi-intel standalone to avoid build issues - parsers: scpart: Fix __udivdi3 undefined on mips - parsers: tplink_safeloader: Fix potential memory leak during parsing - Update email of Tudor Ambarus * tag 'mtd/fixes-for-6.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: MAINTAINERS: Update email of Tudor Ambarus mtd: cfi: allow building spi-intel standalone mtd: parsers: scpart: fix __udivdi3 undefined on mips mtd: parsers: Fix potential memory leak in mtd_parser_tplink_safeloader_parse()
2023-01-12Merge tag 'scsi-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "Ten small fixes (less the one that cleaned up a reverted removal), nine in drivers of which the ufs one is the most critical. The single core patch is a minor speedup to error handling" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: libsas: Grab the ATA port lock in sas_ata_device_link_abort() scsi: hisi_sas: Fix tag freeing for reserved tags scsi: ufs: core: WLUN suspend SSU/enter hibern8 fail recovery scsi: scsi_debug: Delete unreachable code in inquiry_vpd_b0() scsi: mpi3mr: Refer CONFIG_SCSI_MPI3MR in Makefile scsi: core: scsi_error: Do not queue pointless abort workqueue functions scsi: storvsc: Fix swiotlb bounce buffer leak in confidential VM scsi: iscsi: Fix multiple iSCSI session unbind events sent to userspace scsi: mpi3mr: Remove usage of dma_get_required_mask() API scsi: mpt3sas: Remove usage of dma_get_required_mask() API
2023-01-12drm/vkms: reintroduce prepare_fb and cleanup_fb functionsMaíra Canal
With commit 359c6649cd9a ("drm/gem: Implement shadow-plane {begin, end}_fb_access with vmap"), the behavior of the shadow-plane helpers changed and the vunmap is now performed at the end of the current pageflip, instead of the end of the following pageflip. By performing the vunmap at the end of the current pageflip, invalid memory is accessed by the vkms during the plane composition, as the data is being unmapped before being used, as reported by the following warning: [ 275.866047] BUG: unable to handle page fault for address: ffffb382814e8002 [ 275.866055] #PF: supervisor read access in kernel mode [ 275.866058] #PF: error_code(0x0000) - not-present page [ 275.866061] PGD 1000067 P4D 1000067 PUD 110a067 PMD 46e3067 PTE 0 [ 275.866066] Oops: 0000 [#1] PREEMPT SMP PTI [ 275.866070] CPU: 2 PID: 49 Comm: kworker/u8:2 Not tainted 6.1.0-rc6-00018-gb357e7ac1b73-dirty #54 [ 275.866074] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.1-2.fc37 04/01/2014 [ 275.866076] Workqueue: vkms_composer vkms_composer_worker [vkms] [ 275.866084] RIP: 0010:XRGB8888_to_argb_u16+0x5c/0xa0 [vkms] [ 275.866092] Code: bf 56 0a 0f af 56 70 48 8b 76 28 01 ca 49 83 f8 02 41 b9 01 00 00 00 4d 0f 43 c8 48 01 f2 48 83 c2 02 31 f6 66 c7 04 f0 ff ff <0f> b6 0c b2 89 cf c1 e7 08 09 cf 66 89 7c f0 02 0f b6 4c b2 ff 89 [ 275.866095] RSP: 0018:ffffb382801b7db0 EFLAGS: 00010246 [ 275.866098] RAX: ffff896336ace000 RBX: ffff896310e293c0 RCX: 0000000000000000 [ 275.866101] RDX: ffffb382814e8002 RSI: 0000000000000000 RDI: ffffb382801b7de8 [ 275.866103] RBP: 0000000000001400 R08: 0000000000000280 R09: 0000000000000280 [ 275.866105] R10: 0000000000000010 R11: ffffffffc011d990 R12: ffff896302a1ece0 [ 275.866107] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000080008001 [ 275.866109] FS: 0000000000000000(0000) GS:ffff89637dd00000(0000) knlGS:0000000000000000 [ 275.866112] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 275.866114] CR2: ffffb382814e8002 CR3: 0000000003bb4000 CR4: 00000000000006e0 [ 275.866120] Call Trace: [ 275.866123] <TASK> [ 275.866124] compose_active_planes+0x1c4/0x380 [vkms] [ 275.866132] vkms_composer_worker+0x9f/0x130 [vkms] [ 275.866139] process_one_work+0x1c0/0x370 [ 275.866160] worker_thread+0x221/0x410 [ 275.866164] ? worker_clr_flags+0x50/0x50 [ 275.866167] kthread+0xe1/0x100 [ 275.866172] ? kthread_blkcg+0x30/0x30 [ 275.866176] ret_from_fork+0x22/0x30 [ 275.866181] </TASK> [ 275.866182] Modules linked in: vkms [ 275.866186] CR2: ffffb382814e8002 [ 275.866191] ---[ end trace 0000000000000000 ]--- Therefore, introduce again prepare_fb and cleanup_fb functions to the vkms, which were previously removed on commit b43e2ec03b0d ("drm/vkms: Let shadow-plane helpers prepare the plane's FB"). Fixes: 359c6649cd9a ("drm/gem: Implement shadow-plane {begin, end}_fb_access with vmap") Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Maíra Canal <mcanal@igalia.com> Signed-off-by: Melissa Wen <melissa.srw@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230111131304.106039-1-mcanal@igalia.com
2023-01-12drm/i915/display: Prune Interlace modes for Display >=12Ankit Nautiyal
Defeature Display Interlace support. Support for interlace modes is removed from Gen 12 onwards. Pruning the interlace modes for HDMI for Display >=12. Bspec: 50490 v2: Add check for both DP and HDMI. (Ville) Get rid of redundant check for interlace mode in modevalid. (Ville) v3: Simplify the condition to avoid interlace modes. (Jani) Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Uma Shankar <uma.shankar@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230105124125.1129653-1-ankit.k.nautiyal@intel.com
2023-01-12drm/i915/display: Drop check for doublescan mode in modevalidAnkit Nautiyal
Since the DP/HDMI connector do not set connector->doublescan_allowed, the doublescan modes will get automatically filtered during drm_helper_probe_single_connector_modes(). Therefore check for double scan modes is not required and is dropped from modevalid functions for both DP and HDMI. Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Uma Shankar <uma.shankar@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221017143038.1748319-2-ankit.k.nautiyal@intel.com
2023-01-11net: stmmac: add aux timestamps fifo clearance waitNoor Azura Ahmad Tarmizi
Add timeout polling wait for auxiliary timestamps snapshot FIFO clear bit (ATSFC) to clear. This is to ensure no residue fifo value is being read erroneously. Fixes: f4da56529da6 ("net: stmmac: Add support for external trigger timestamping") Cc: <stable@vger.kernel.org> # 5.10.x Signed-off-by: Noor Azura Ahmad Tarmizi <noor.azura.ahmad.tarmizi@intel.com> Link: https://lore.kernel.org/r/20230111050200.2130-1-noor.azura.ahmad.tarmizi@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-01-12scsi: hisi_sas: Set a port invalid only if there are no devices attached ↵Yihang Li
when refreshing port id Currently the driver sets the port invalid if one phy in the port is not enabled, which may cause issues in expander situation. In directly attached situation, if phy up doesn't occur in time when refreshing port id, the port is incorrectly set to invalid which will also cause disk lost. Therefore set a port invalid only if there are no devices attached to the port. Signed-off-by: Yihang Li <liyihang9@huawei.com> Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com> Link: https://lore.kernel.org/r/1672805000-141102-3-git-send-email-chenxiang66@hisilicon.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-01-12scsi: hisi_sas: Use abort task set to reset SAS disks when discoveredXingui Yang
Currently clear task set is used to abort all commands remaining in the disk when the SAS disk is discovered, and if the disk is discovered by two initiators, other I_T nexuses are also affected. So use abort task set instead and take effect only on the specified I_T nexus. Signed-off-by: Xingui Yang <yangxingui@huawei.com> Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com> Link: https://lore.kernel.org/r/1672805000-141102-2-git-send-email-chenxiang66@hisilicon.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-01-11Merge branch '10GbE' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2023-01-10 (ixgbe, igc, iavf) This series contains updates to ixgbe, igc, and iavf drivers. Yang Yingliang adds calls to pci_dev_put() for proper ref count tracking on ixgbe. Christopher adds setting of Toggle on Target Time bits for proper pulse per second (PPS) synchronization for igc. Daniil Tatianin fixes, likely, copy/paste issue that misreported destination instead of source for IP mask for iavf error. * '10GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue: iavf/iavf_main: actually log ->src mask when talking about it igc: Fix PPS delta between two synchronized end-points ixgbe: fix pci device refcount leak ==================== Link: https://lore.kernel.org/r/20230110223825.648544-1-anthony.l.nguyen@intel.com Reviewed-by: Alexander Duyck <alexanderduyck@fb.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-01-11bnxt: make sure we return pages to the poolJakub Kicinski
Before the commit under Fixes the page would have been released from the pool before the napi_alloc_skb() call, so normal page freeing was fine (released page == no longer in the pool). After the change we just mark the page for recycling so it's still in the pool if the skb alloc fails, we need to recycle. Same commit added the same bug in the new bnxt_rx_multi_page_skb(). Fixes: 1dc4c557bfed ("bnxt: adding bnxt_xdp_build_skb to build skb from multibuffer xdp_buff") Reviewed-by: Andy Gospodarek <gospo@broadcom.com> Link: https://lore.kernel.org/r/20230111042547.987749-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-01-11net: hns3: fix wrong use of rss size during VF rss configJie Wang
Currently, it used old rss size to get current tc mode. As a result, the rss size is updated, but the tc mode is still configured based on the old rss size. So this patch fixes it by using the new rss size in both process. Fixes: 93969dc14fcd ("net: hns3: refactor VF rss init APIs with new common rss init APIs") Signed-off-by: Jie Wang <wangjie125@huawei.com> Signed-off-by: Hao Lan <lanhao@huawei.com> Reviewed-by: Alexander Duyck <alexanderduyck@fb.com> Link: https://lore.kernel.org/r/20230110115359.10163-1-lanhao@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-01-11drm/amdkfd: Page aligned memory reserve sizePhilip Yang
Use page aligned size to reserve memory usage because page aligned TTM BO size is used to unreserve memory usage, otherwise no page aligned size causes memory usage accounting unbalanced. Change vram_used definition type to int64_t to be able to trigger WARN_ONCE(adev && adev->kfd.vram_used < 0, "..."), to help debug the accounting issue with warning and backtrace. Signed-off-by: Philip Yang <Philip.Yang@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-11drm/amdkfd: Cleanup vm process info if init vm failedPhilip Yang
If acquire_vm failed when initializing KFD vm, set vm->process_info to NULL and free process info, otherwise, the future acquire_vm will always fail as vm->process_info is not NULL. Pass avm as parameter to remove the duplicate code. Signed-off-by: Philip Yang <Philip.Yang@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-11drm/panel-xinpeng-xpp055c272: Drop custom DSI write macroJavier Martinez Canillas
There is a macro for this already in the <drm/drm_mipi_dsi.h> header, use that instead and delete the custom DSI write macro defined in the driver. Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230107191822.3787147-14-javierm@redhat.com
2023-01-11drm/panel-sony-tulip-truly-nt35521: Drop custom DSI write macroJavier Martinez Canillas
There is a macro for this already in the <drm/drm_mipi_dsi.h> header, use that instead and delete the custom DSI write macro defined in the driver. Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230107191822.3787147-13-javierm@redhat.com
2023-01-11drm/panel-mantix-mlaf057we51: Drop custom DSI write macroJavier Martinez Canillas
There is a macro for this already in the <drm/drm_mipi_dsi.h> header, use that instead and delete the custom DSI write macro defined in the driver. Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Guido Günther <agx@sigxcpu.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230107191822.3787147-12-javierm@redhat.com
2023-01-11drm/panel-sharp-ls060t1sx01: Drop custom DSI write macroJavier Martinez Canillas
There is a macro for this already in the <drm/drm_mipi_dsi.h> header, use that instead and delete the custom DSI write macro defined in the driver. Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230107191822.3787147-11-javierm@redhat.com
2023-01-11drm/panel-samsung-sofef00: Drop custom DSI write macroJavier Martinez Canillas
There is a macro for this already in the <drm/drm_mipi_dsi.h> header, use that instead and delete the custom DSI write macro defined in the driver. Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230107191822.3787147-10-javierm@redhat.com
generated by cgit (git 2.34.1) at 2025-09-16 11:28:57 +0000