| Age | Commit message (Collapse) | Author |
|---|
|
Instead of having them as individual fields in ptp_ops, wrap the
coefficients in a separate struct so they can be referenced together.
Fixes: de776d0d316f ("net: dsa: mv88e6xxx: add support for mv88e6393x family")
Signed-off-by: Shenghao Yang <me@shenghaoyang.info>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add Fibocom FG132 0x0112 composition:
T: Bus=03 Lev=02 Prnt=06 Port=01 Cnt=02 Dev#= 10 Spd=12 MxCh= 0
D: Ver= 2.01 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=2cb7 ProdID=0112 Rev= 5.15
S: Manufacturer=Fibocom Wireless Inc.
S: Product=Fibocom Module
S: SerialNumber=xxxxxxxx
C:* #Ifs= 4 Cfg#= 1 Atr=a0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan
E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=32ms
E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=01(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=83(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
E: Ad=84(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=03(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=86(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
Signed-off-by: Reinhard Speyerer <rspmn@arcor.de>
Link: https://patch.msgid.link/ZxLKp5YZDy-OM0-e@arcor.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The existing code moves VF to the same namespace as the synthetic NIC
during netvsc_register_vf(). But, if the synthetic device is moved to a
new namespace after the VF registration, the VF won't be moved together.
To make the behavior more consistent, add a namespace check for synthetic
NIC's NETDEV_REGISTER event (generated during its move), and move the VF
if it is not in the same namespace.
Cc: stable@vger.kernel.org
Fixes: c0a41b887ce6 ("hv_netvsc: move VF to same namespace as netvsc device")
Suggested-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/1729275922-17595-1-git-send-email-haiyangz@microsoft.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The well-known errata regarding EEE not being functional on various KSZ
switches has been refactored a few times. Recently the refactoring has
excluded several switches that the errata should also apply to.
Disable EEE for additional switches with this errata and provide
additional comments referring to the public errata document.
The original workaround for the errata was applied with a register
write to manually disable the EEE feature in MMD 7:60 which was being
applied for KSZ9477/KSZ9897/KSZ9567 switch ID's.
Then came commit 26dd2974c5b5 ("net: phy: micrel: Move KSZ9477 errata
fixes to PHY driver") and commit 6068e6d7ba50 ("net: dsa: microchip:
remove KSZ9477 PHY errata handling") which moved the errata from the
switch driver to the PHY driver but only for PHY_ID_KSZ9477 (PHY ID)
however that PHY code was dead code because an entry was never added
for PHY_ID_KSZ9477 via MODULE_DEVICE_TABLE.
This was apparently realized much later and commit 54a4e5c16382 ("net:
phy: micrel: add Microchip KSZ 9477 to the device table") added the
PHY_ID_KSZ9477 to the PHY driver but as the errata was only being
applied to PHY_ID_KSZ9477 it's not completely clear what switches
that relates to.
Later commit 6149db4997f5 ("net: phy: micrel: fix KSZ9477 PHY issues
after suspend/resume") breaks this again for all but KSZ9897 by only
applying the errata for that PHY ID.
Following that this was affected with commit 08c6d8bae48c("net: phy:
Provide Module 4 KSZ9477 errata (DS80000754C)") which removes
the blatant register write to MMD 7:60 and replaces it by
setting phydev->eee_broken_modes = -1 so that the generic phy-c45 code
disables EEE but this is only done for the KSZ9477_CHIP_ID (Switch ID).
Lastly commit 0411f73c13af ("net: dsa: microchip: disable EEE for
KSZ8567/KSZ9567/KSZ9896/KSZ9897.") adds some additional switches
that were missing to the errata due to the previous changes.
This commit adds an additional set of switches.
Fixes: 0411f73c13af ("net: dsa: microchip: disable EEE for KSZ8567/KSZ9567/KSZ9896/KSZ9897.")
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://patch.msgid.link/20241018160658.781564-1-tharvey@gateworks.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
When ata_qc_complete() schedules a command for EH using
ata_qc_schedule_eh(), blk_abort_request() will be called, which leads to
req->q->mq_ops->timeout() / scsi_timeout() being called.
scsi_timeout(), if the LLDD has no abort handler (libata has no abort
handler), will set host byte to DID_TIME_OUT, and then call
scsi_eh_scmd_add() to add the command to EH.
Thus, when commands first enter libata's EH strategy_handler, all the
commands that have been added to EH will have DID_TIME_OUT set.
Commit e5dd410acb34 ("ata: libata: Clear DID_TIME_OUT for ATA PT commands
with sense data") clears this bogus DID_TIME_OUT flag for all commands
that reached libata's EH strategy_handler.
libata has its own flag (AC_ERR_TIMEOUT), that it sets for commands that
have not received a completion at the time of entering EH.
ata_eh_worth_retry() has no special handling for AC_ERR_TIMEOUT, so by
default timed out commands will get flag ATA_QCFLAG_RETRY set, and will be
retried after the port has been reset (ata_eh_link_autopsy() always
triggers a port reset if any command has AC_ERR_TIMEOUT set).
For a command that has ATA_QCFLAG_RETRY set, while also having an error
flag set (e.g. AC_ERR_TIMEOUT), ata_eh_finish() will not increment
scmd->allowed, so the command will at most be retried scmd->allowed number
of times (which by default is set to 3).
However, scsi_eh_flush_done_q() will only retry commands for which
scsi_noretry_cmd() returns false.
For a command that has DID_TIME_OUT set, while also having either the
FAILFAST flag set, or the command being a passthrough command,
scsi_noretry_cmd() will return true. Thus, such a command will never be
retried.
Thus, make sure that libata sets SCSI's DID_TIME_OUT flag for commands that
actually timed out (libata's AC_ERR_TIMEOUT flag), such that timed out
commands will once again not be retried if they are also a FAILFAST or
passthrough command.
Cc: stable@vger.kernel.org
Fixes: e5dd410acb34 ("ata: libata: Clear DID_TIME_OUT for ATA PT commands with sense data")
Reported-by: Lai, Yi <yi1.lai@linux.intel.com>
Closes: https://lore.kernel.org/linux-ide/ZxYz871I3Blsi30F@ly-workstation/
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20241023105540.1070012-2-cassel@kernel.org
Signed-off-by: Niklas Cassel <cassel@kernel.org>
|
|
Add check for the return value of spi_get_csgpiod() to avoid passing a NULL
pointer to gpiod_direction_output(), preventing a crash when GPIO chip
select is not used.
Fix below crash:
[ 4.251960] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
[ 4.260762] Mem abort info:
[ 4.263556] ESR = 0x0000000096000004
[ 4.267308] EC = 0x25: DABT (current EL), IL = 32 bits
[ 4.272624] SET = 0, FnV = 0
[ 4.275681] EA = 0, S1PTW = 0
[ 4.278822] FSC = 0x04: level 0 translation fault
[ 4.283704] Data abort info:
[ 4.286583] ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000
[ 4.292074] CM = 0, WnR = 0, TnD = 0, TagAccess = 0
[ 4.297130] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
[ 4.302445] [0000000000000000] user address but active_mm is swapper
[ 4.308805] Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP
[ 4.315072] Modules linked in:
[ 4.318124] CPU: 2 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.12.0-rc4-next-20241023-00008-ga20ec42c5fc1 #359
[ 4.328130] Hardware name: LS1046A QDS Board (DT)
[ 4.332832] pstate: 40000005 (nZcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 4.339794] pc : gpiod_direction_output+0x34/0x5c
[ 4.344505] lr : gpiod_direction_output+0x18/0x5c
[ 4.349208] sp : ffff80008003b8f0
[ 4.352517] x29: ffff80008003b8f0 x28: 0000000000000000 x27: ffffc96bcc7e9068
[ 4.359659] x26: ffffc96bcc6e00b0 x25: ffffc96bcc598398 x24: ffff447400132810
[ 4.366800] x23: 0000000000000000 x22: 0000000011e1a300 x21: 0000000000020002
[ 4.373940] x20: 0000000000000000 x19: 0000000000000000 x18: ffffffffffffffff
[ 4.381081] x17: ffff44740016e600 x16: 0000000500000003 x15: 0000000000000007
[ 4.388221] x14: 0000000000989680 x13: 0000000000020000 x12: 000000000000001e
[ 4.395362] x11: 0044b82fa09b5a53 x10: 0000000000000019 x9 : 0000000000000008
[ 4.402502] x8 : 0000000000000002 x7 : 0000000000000007 x6 : 0000000000000000
[ 4.409641] x5 : 0000000000000200 x4 : 0000000002000000 x3 : 0000000000000000
[ 4.416781] x2 : 0000000000022202 x1 : 0000000000000000 x0 : 0000000000000000
[ 4.423921] Call trace:
[ 4.426362] gpiod_direction_output+0x34/0x5c (P)
[ 4.431067] gpiod_direction_output+0x18/0x5c (L)
[ 4.435771] dspi_setup+0x220/0x334
Fixes: 9e264f3f85a5 ("spi: Replace all spi->chip_select and spi->cs_gpiod references with function call")
Cc: stable@vger.kernel.org
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20241023203032.1388491-1-Frank.Li@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Old device trees for some platforms already define wifi nodes for the WCN
family of chips since before power sequencing was added upstream.
These nodes don't consume the regulator outputs from the PMU, and if we
allow this driver to bind to one of such "incomplete" nodes, we'll see a
kernel log error about the infinite probe deferral.
Extend the driver by adding a platform data struct matched against the
compatible. This struct contains the pwrseq target string as well as a
validation function called right after entering probe().
For Qualcomm WCN models, check the existence of the regulator supply
property that indicates the DT is already using power sequencing and return
-ENODEV if it's not there, indicating to the driver model that the device
should not be bound to the pwrctl driver.
Link: https://lore.kernel.org/r/20241007092447.18616-1-brgl@bgdev.pl
Fixes: 6140d185a43d ("PCI/pwrctl: Add a PCI power control driver for power sequenced devices")
Reported-by: Johan Hovold <johan@kernel.org>
Closes: https://lore.kernel.org/all/Zv565olMDDGHyYVt@hovoldconsulting.com/
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
In sdei_device_freeze(), the input parameter of cpuhp_remove_state() is
passed as 'sdei_entry_point' by mistake. Change it to 'sdei_hp_state'.
Fixes: d2c48b2387eb ("firmware: arm_sdei: Fix sleep from invalid context BUG")
Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Reviewed-by: James Morse <james.morse@arm.com>
Link: https://lore.kernel.org/r/20241016084740.183353-1-wangxiongfeng2@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
In mtk_crtc_create(), if the call to mbox_request_channel() fails then we
set the "mtk_crtc->cmdq_client.chan" pointer to NULL. In that situation,
we do not call cmdq_pkt_create().
During the cleanup, we need to check if the "mtk_crtc->cmdq_client.chan"
is NULL first before calling cmdq_pkt_destroy(). Calling
cmdq_pkt_destroy() is unnecessary if we didn't call cmdq_pkt_create() and
it will result in a NULL pointer dereference.
Fixes: 7627122fd1c0 ("drm/mediatek: Add cmdq_handle in mtk_crtc")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/cc537bd6-837f-4c85-a37b-1a007e268310@stanley.mountain/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
|
|
Update efuse data for MT8188 displayport.
The DP monitor can not display when DUT connected to USB-c to DP dongle.
Analysis view is invalid DP efuse data.
Fixes: 350c3fe907fb ("drm/mediatek: dp: Add support MT8188 dp/edp function")
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Liankun Yang <liankun.yang@mediatek.com>
Reviewed-by: Fei Shao <fshao@chromium.org>
Tested-by: Fei Shao <fshao@chromium.org>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20240923132521.22785-1-liankun.yang@mediatek.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
|
|
It was reported that after resume from suspend a PCI error is logged
and connectivity is broken. Error message is:
PCI error (cmd = 0x0407, status_errs = 0x0000)
The message seems to be a red herring as none of the error bits is set,
and the PCI command register value also is normal. Exception handling
for a PCI error includes a chip reset what apparently brakes connectivity
here. The interrupt status bit triggering the PCI error handling isn't
actually used on PCIe chip versions, so it's not clear why this bit is
set by the chip. Fix this by ignoring this bit on PCIe chip versions.
Fixes: 0e4851502f84 ("r8169: merge with version 8.001.00 of Realtek's r8168 driver")
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219388
Tested-by: Atlas Yu <atlas.yu@canonical.com>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/78e2f535-438f-4212-ad94-a77637ac6c9c@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Some devices do not support fullscreen 3D.
v2: Make the check generic.
Fixes: ec1aab7816b0 ("drm/amdgpu/swsmu: default to fullscreen 3D profile for dGPUs")
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Kenneth Feng <kenneth.feng@amd.com>
Cc: Lijo Lazar <lijo.lazar@amd.com>
(cherry picked from commit 1cdd67510e54e3832f14a885dbf5858584558650)
|
|
Stuart Hayhurst has found that both at bootup and fullscreen VA-API video
is leading to black screens for around 1 second and kernel WARNING [1] traces
when calling dmub_psr_enable() with Parade 08-01 TCON.
These symptoms all go away with PSR-SU disabled for this TCON, so disable
it for now while DMUB traces [2] from the failure can be analyzed and the failure
state properly root caused.
Cc: Marc Rossi <Marc.Rossi@amd.com>
Cc: Hamza Mahfooz <Hamza.Mahfooz@amd.com>
Link: https://gitlab.freedesktop.org/drm/amd/uploads/a832dd515b571ee171b3e3b566e99a13/dmesg.log [1]
Link: https://gitlab.freedesktop.org/drm/amd/uploads/8f13ff3b00963c833e23e68aa8116959/output.log [2]
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/2645
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Link: https://lore.kernel.org/r/20240205211233.2601-1-mario.limonciello@amd.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit afb634a6823d8d9db23c5fb04f79c5549349628b)
Cc: stable@vger.kernel.org
|
|
There is random data corruption caused by const fill, this is caused by
write compression mode not correctly configured.
So correct compression mode for const fill.
Signed-off-by: Frank Min <Frank.Min@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 75400f8d6e36afc88d59db8a1f3e4b7d90d836ad)
Cc: stable@vger.kernel.org # 6.11.x
|
|
[Why&How]
Disabling P-State support on full updates for DCN401 results in
introducing additional communication with SMU. A UCLK hard min message
to SMU takes 4 seconds to go through, which was due to DCN not allowing
pstate switch, which was caused by incorrect value for TTU watermark
before blanking the HUBP prior to DPG on for servicing the test request.
Fix the issue temporarily by disallowing pstate changes for compliance
test while test request handler is reworked for a proper fix.
Fixes: 67ea53a4bd9d ("drm/amd/display: Disable DCN401 UCLK P-State support on full updates")
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 8a79f7cdbb41bb0ddfd4d7662b4428d4a9d5306d)
Cc: stable@vger.kernel.org
|
|
[Why&How]
vblank immediate disable currently does not work for all asics. On
DCN401, the vblank interrupts never stop coming, and hence we never
get a chance to trigger idle optimizations.
Add a workaround to enable immediate disable only on APUs for now. This
adds a 2-frame delay for triggering idle optimization, which is a
negligible overhead.
Fixes: 58a261bfc967 ("drm/amd/display: use a more lax vblank enable policy for older ASICs")
Fixes: e45b6716de4b ("drm/amd/display: use a more lax vblank enable policy for DCN35+")
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 9b47278cec98e9894adf39229e91aaf4ab9140c5)
Cc: stable@vger.kernel.org
|
|
disable deep sleep during the compute workload for the
potential performance loss on smu v14.0.2/3
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 7d9af459f43436452103babb960fd0ecb13c714e)
|
|
update overdrive function on smu v14.0.2/3
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Acked-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit dcf822fca599e4cbc582801222d519b4da82fab5)
|
|
update the driver-fw interface file for smu v14.0.2/3
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 0642c95efbdc09efb34dd9f1ac642daa0daa9c2c)
|
|
If a BIOS provides bad data in response to an ATIF method call
this causes a NULL pointer dereference in the caller.
```
? show_regs (arch/x86/kernel/dumpstack.c:478 (discriminator 1))
? __die (arch/x86/kernel/dumpstack.c:423 arch/x86/kernel/dumpstack.c:434)
? page_fault_oops (arch/x86/mm/fault.c:544 (discriminator 2) arch/x86/mm/fault.c:705 (discriminator 2))
? do_user_addr_fault (arch/x86/mm/fault.c:440 (discriminator 1) arch/x86/mm/fault.c:1232 (discriminator 1))
? acpi_ut_update_object_reference (drivers/acpi/acpica/utdelete.c:642)
? exc_page_fault (arch/x86/mm/fault.c:1542)
? asm_exc_page_fault (./arch/x86/include/asm/idtentry.h:623)
? amdgpu_atif_query_backlight_caps.constprop.0 (drivers/gpu/drm/amd/amdgpu/amdgpu_acpi.c:387 (discriminator 2)) amdgpu
? amdgpu_atif_query_backlight_caps.constprop.0 (drivers/gpu/drm/amd/amdgpu/amdgpu_acpi.c:386 (discriminator 1)) amdgpu
```
It has been encountered on at least one system, so guard for it.
Fixes: d38ceaf99ed0 ("drm/amdgpu: add core driver (v4)")
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit c9b7c809b89f24e9372a4e7f02d64c950b07fdee)
Cc: stable@vger.kernel.org
|
|
During boot, users sometimes observe the following warning:
[7.841431] WARNING: CPU: 4 PID: 492 at
drivers/interconnect/core.c:685 __icc_enable
(drivers/interconnect/core.c:685 (discriminator 7))
[..]
[7.841541] Call trace:
[7.841542] __icc_enable (drivers/interconnect/core.c:685 (discriminator 7))
[7.841545] icc_disable (drivers/interconnect/core.c:708)
[7.841547] geni_icc_disable (drivers/soc/qcom/qcom-geni-se.c:862)
[7.841553] spi_geni_runtime_suspend+0x3c/0x4c spi_geni_qcom
This occurs when the spi-geni driver receives an -EPROBE_DEFER error
from spi_geni_grab_gpi_chan(), causing devres to start releasing all
resources as shown below:
[7.138679] geni_spi 880000.spi: DEVRES REL ffff800081443800 devm_icc_release (8 bytes)
[7.138751] geni_spi 880000.spi: DEVRES REL ffff800081443800 devm_icc_release (8 bytes)
[7.138827] geni_spi 880000.spi: DEVRES REL ffff800081443800 pm_runtime_disable_action (16 bytes)
[7.139494] geni_spi 880000.spi: DEVRES REL ffff800081443800 devm_pm_opp_config_release (16 bytes)
[7.139512] geni_spi 880000.spi: DEVRES REL ffff800081443800 devm_spi_release_controller (8 bytes)
[7.139516] geni_spi 880000.spi: DEVRES REL ffff800081443800 devm_clk_release (16 bytes)
[7.139519] geni_spi 880000.spi: DEVRES REL ffff800081443800 devm_ioremap_release (8 bytes)
[7.139524] geni_spi 880000.spi: DEVRES REL ffff800081443800 devm_region_release (24 bytes)
[7.139527] geni_spi 880000.spi: DEVRES REL ffff800081443800 devm_kzalloc_release (22 bytes)
[7.139530] geni_spi 880000.spi: DEVRES REL ffff800081443800 devm_pinctrl_release (8 bytes)
[7.139539] geni_spi 880000.spi: DEVRES REL ffff800081443800 devm_kzalloc_release (40 bytes)
The issue here is that pm_runtime_disable_action() results in a call to
spi_geni_runtime_suspend(), which attempts to suspend the device and
disable an interconnect path that devm_icc_release() has just released.
Resolve this by calling geni_icc_get() before enabling runtime PM. This
approach ensures that when devres releases resources in reverse order,
it will start with pm_runtime_disable_action(), suspending the device,
and then proceed to free the remaining resources.
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
Closes: https://lore.kernel.org/r/CA+G9fYtsjFtddG8i+k-SpV8U6okL0p4zpsTiwGfNH5GUA8dWAA@mail.gmail.com
Fixes: 89e362c883c6 ("spi: geni-qcom: Undo runtime PM changes at driver exit time")
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Link: https://patch.msgid.link/20241008231615.430073-1-djakov@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The number of CNS bits in the command is specific to the nvme spec
version compliance. The existing check is not sufficient for possible
CNS values the driver uses that may create confusion between host and
device, so enhance the check to consider the version and desired CNS
value.
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
In commit 9f428b95ac89 ("drm/mediatek: Add new color format MACROs in
OVL"), some new color formats are defined in the MACROs to make the
switch statement more concise. That commit was intended to be a no-op
cleanup. However, there are typos in these formats MACROs, which cause
the return value to be incorrect. Fix the typos to ensure the return
value remains unchanged.
Fixes: 9f428b95ac89 ("drm/mediatek: Add new color format MACROs in OVL")
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Hsin-Te Yuan <yuanhsinte@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20241016-color-v3-1-e0f5f44a72d8@chromium.org/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
|
|
Since some SoCs support premultiplied pixel formats but some do not,
the blend_modes parameter is added to mtk_plane_init(), which is
obtained from the mtk_ddp_comp_get_blend_modes function implemented
in different blending supported components.
The blending supported components can use driver data to set the
blend mode capabilities for different SoCs.
Signed-off-by: Jason-JH.Lin <jason-jh.lin@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20241009034646.13143-6-jason-jh.lin@mediatek.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
|
|
OVL_CON_CLRFMT_MAN is a configuration for extending color format
settings of DISP_REG_OVL_CON(n).
It will change some of the original color format settings.
Take the settings of (3 << 12) for example.
- If OVL_CON_CLRFMT_MAN = 0 means OVL_CON_CLRFMT_RGBA8888.
- If OVL_CON_CLRFMT_MAN = 1 means OVL_CON_CLRFMT_PARGB8888.
Since previous SoCs did not support OVL_CON_CLRFMT_MAN, this means
that the SoC does not support the premultiplied color format.
It will break the original color format setting of MT8173.
Therefore, the blend_modes is added to the driver data and then
mtk_ovl_fmt_convert() will check the blend_modes to see if
pre-multiplied is supported in the current platform.
If it is not supported, use coverage mode to set it to the supported
color formats to solve the degradation problem.
Fixes: a3f7f7ef4bfe ("drm/mediatek: Support "Pre-multiplied" blending in OVL")
Signed-off-by: Jason-JH.Lin <jason-jh.lin@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20241009034646.13143-5-jason-jh.lin@mediatek.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
|
|
Since we changed MACROs to be consistent with DRM input color format
naming, the comment for ovl_fmt_conver() is no longer needed.
Fixes: 9f428b95ac89 ("drm/mediatek: Add new color format MACROs in OVL")
Signed-off-by: Jason-JH.Lin <jason-jh.lin@mediatek.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20241009034646.13143-4-jason-jh.lin@mediatek.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
|
|
Refine the comment for ignore_pixel_alpha flag and move it to
if(state->fb) statement to make it less conditional.
Signed-off-by: Jason-JH.Lin <jason-jh.lin@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20241009034646.13143-3-jason-jh.lin@mediatek.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
|
|
OVL_CON_AEN is for alpha blending enable.
For the SoC that is supported the blend_modes, OVL_CON_AEN will always
enabled to use constant alpha and then use the ignore_pixel_alpha bit
to do the alpha blending for XRGB8888 format.
Note that ignore pixel alpha bit is not supported if the SoC is not
supported the blend_modes.
So it will break the original setting of XRGB8888 format for the
blend_modes unsupported SoCs, such as MT8173.
To fix the downgrade issue, enable alpha blending only when a valid
blend_mode or has_alpha is set.
Fixes: bc46eb5d5d77 ("drm/mediatek: Support DRM plane alpha in OVL")
Signed-off-by: Jason-JH.Lin <jason-jh.lin@mediatek.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20241009034646.13143-2-jason-jh.lin@mediatek.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
|
|
The fix for MAC addresses broke detection of the naming convention
because it gave network devices no random MAC before bind()
was called. This means that the check for the local assignment bit
was always negative as the address was zeroed from allocation,
instead of from overwriting the MAC with a unique hardware address.
The correct check for whether bind() has altered the MAC is
done with is_zero_ether_addr
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Reported-by: Greg Thelen <gthelen@google.com>
Diagnosed-by: John Sperbeck <jsperbeck@google.com>
Fixes: bab8eb0dd4cb9 ("usbnet: modern method to get random MAC")
Link: https://patch.msgid.link/20241017071849.389636-1-oneukum@suse.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
It is meant to use xa_err() to extract the error encoded in the return
value of xa_store().
Fixes: 44c2fbebe18a ("mlxsw: spectrum_router: Share nexthop counters in resilient groups")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Tested-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/20241017023223.74180-1-yuancan@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add error pointer check after tegra_xusb_find_lane().
Fixes: e8f7d2f409a1 ("phy: tegra: xusb: Add usb-phy support")
Signed-off-by: Dipendra Khadka <kdipendra88@gmail.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20240930191101.13184-1-kdipendra88@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
When enable initcall_debug together with higher debug level below.
CONFIG_CONSOLE_LOGLEVEL_DEFAULT=9
CONFIG_CONSOLE_LOGLEVEL_QUIET=9
CONFIG_MESSAGE_LOGLEVEL_DEFAULT=7
The initialization of i.MX8MP PCIe PHY might be timeout failed randomly.
To fix this issue, adjust the sequence of the resets refer to the power
up sequence listed below.
i.MX8MP PCIe PHY power up sequence:
/---------------------------------------------
1.8v supply ---------/
/---------------------------------------------------
0.8v supply ---/
---\ /--------------------------------------------------
X REFCLK Valid
Reference Clock ---/ \--------------------------------------------------
-------------------------------------------
|
i_init_restn --------------
------------------------------------
|
i_cmn_rstn ---------------------
-------------------------------
|
o_pll_lock_done --------------------------
Logs:
imx6q-pcie 33800000.pcie: host bridge /soc@0/pcie@33800000 ranges:
imx6q-pcie 33800000.pcie: IO 0x001ff80000..0x001ff8ffff -> 0x0000000000
imx6q-pcie 33800000.pcie: MEM 0x0018000000..0x001fefffff -> 0x0018000000
probe of clk_imx8mp_audiomix.reset.0 returned 0 after 1052 usecs
probe of 30e20000.clock-controller returned 0 after 32971 usecs
phy phy-32f00000.pcie-phy.4: phy poweron failed --> -110
probe of 30e10000.dma-controller returned 0 after 10235 usecs
imx6q-pcie 33800000.pcie: waiting for PHY ready timeout!
dwhdmi-imx 32fd8000.hdmi: Detected HDMI TX controller v2.13a with HDCP (samsung_dw_hdmi_phy2)
imx6q-pcie 33800000.pcie: probe with driver imx6q-pcie failed with error -110
Fixes: dce9edff16ee ("phy: freescale: imx8m-pcie: Add i.MX8MP PCIe PHY support")
Cc: stable@vger.kernel.org
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
v2 changes:
- Rebase to latest fixes branch of linux-phy git repo.
- Richard's environment have problem and can't sent out patch. So I help
post this fix patch.
Link: https://lore.kernel.org/r/20241021155241.943665-1-Frank.Li@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
There is a race between the CREQ tasklet and destroy qp when accessing the
qp-handle table. There is a chance of reading a valid qp-handle in the
CREQ tasklet handler while the QP is already moving ahead with the
destruction.
Fixing this race by implementing a table-lock to synchronize the access.
Fixes: f218d67ef004 ("RDMA/bnxt_re: Allow posting when QPs are in error")
Fixes: 84cf229f4001 ("RDMA/bnxt_re: Fix the qp table indexing")
Link: https://patch.msgid.link/r/1728912975-19346-3-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Control path completion processing always runs in tasklet context. To
synchronize with the posting thread, there is no need to use the irq
variant of spin lock. Use spin_lock_bh instead.
Fixes: 1ac5a4047975 ("RDMA/bnxt_re: Add bnxt_re RoCE driver")
Link: https://patch.msgid.link/r/1728912975-19346-2-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
After the cited commit below max_dest_rd_atomic and max_rd_atomic values
are being rounded down to the next power of 2. As opposed to the old
behavior and mlx4 driver where they used to be rounded up instead.
In order to stay consistent with older code and other drivers, revert to
using fls round function which rounds up to the next power of 2.
Fixes: f18e26af6aba ("RDMA/mlx5: Convert modify QP to use MLX5_SET macros")
Link: https://patch.msgid.link/r/d85515d6ef21a2fa8ef4c8293dce9b58df8a6297.1728550179.git.leon@kernel.org
Signed-off-by: Patrisious Haddad <phaddad@nvidia.com>
Reviewed-by: Maher Sanalla <msanalla@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Restore the missing functionality to dump vendor specific QP details,
which was mistakenly removed in the commit mentioned in Fixes line.
Fixes: 5cc34116ccec ("RDMA: Add dedicated QP resource tracker function")
Link: https://patch.msgid.link/r/ed9844829135cfdcac7d64285688195a5cd43f82.1728323026.git.leonro@nvidia.com
Reported-by: Dr. David Alan Gilbert <linux@treblig.org>
Closes: https://lore.kernel.org/all/Zv_4qAxuC0dLmgXP@gallifrey
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
The op argument is missing the colon and is not picked up by the
kerneldoc generator. Fix it to address the following build warning:
drivers/spi/spi-mtk-snfi.c:1201: warning: Function parameter or struct member 'op' not described in 'mtk_snand_is_page_ops'
Fixes: 764f1b748164 ("spi: add driver for MTK SPI NAND Flash Interface")
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://patch.msgid.link/20241021142113.71081-1-brgl@bgdev.pl
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Some machines like the Dell G15 5155 emit WMI events when
suspending/resuming. Ignore those WMI events.
Tested-by: siddharth.manthan@gmail.com
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Acked-by: Pali Rohár <pali@kernel.org>
Link: https://lore.kernel.org/r/20241014220529.397390-1-W_Armin@gmx.de
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Commit 50c6dbdfd16e ("x86/ioremap: Improve iounmap() address range checks")
introduces a WARN when adrress ranges of iounmap are invalid. On Thinkpad
P1 Gen 7 (Meteor Lake-P) this caused the following warning to appear:
WARNING: CPU: 7 PID: 713 at arch/x86/mm/ioremap.c:461 iounmap+0x58/0x1f0
Modules linked in: rfkill(+) snd_timer(+) fjes(+) snd soundcore intel_pmc_core(+)
int3403_thermal(+) int340x_thermal_zone intel_vsec pmt_telemetry acpi_pad pmt_class
acpi_tad int3400_thermal acpi_thermal_rel joydev loop nfnetlink zram xe drm_suballoc_helper
nouveau i915 mxm_wmi drm_ttm_helper gpu_sched drm_gpuvm drm_exec drm_buddy i2c_algo_bit
crct10dif_pclmul crc32_pclmul ttm crc32c_intel polyval_clmulni rtsx_pci_sdmmc ucsi_acpi
polyval_generic mmc_core hid_multitouch drm_display_helper ghash_clmulni_intel typec_ucsi
nvme sha512_ssse3 video sha256_ssse3 nvme_core intel_vpu sha1_ssse3 rtsx_pci cec typec
nvme_auth i2c_hid_acpi i2c_hid wmi pinctrl_meteorlake serio_raw ip6_tables ip_tables fuse
CPU: 7 UID: 0 PID: 713 Comm: (udev-worker) Not tainted 6.12.0-rc2iounmap+ #42
Hardware name: LENOVO 21KWCTO1WW/21KWCTO1WW, BIOS N48ET19W (1.06 ) 07/18/2024
RIP: 0010:iounmap+0x58/0x1f0
Code: 85 6a 01 00 00 48 8b 05 e6 e2 28 04 48 39 c5 72 19 eb 26 cc cc cc 48 ba 00 00 00 00 00 00 32 00 48 8d 44 02 ff 48 39 c5 72 23 <0f> 0b 48 83 c4 08 5b 5d 41 5c c3 cc cc cc cc 48 ba 00 00 00 00 00
RSP: 0018:ffff888131eff038 EFLAGS: 00010207
RAX: ffffc90000000000 RBX: 0000000000000000 RCX: ffff888e33b80000
RDX: dffffc0000000000 RSI: ffff888e33bc29c0 RDI: 0000000000000000
RBP: 0000000000000000 R08: ffff8881598a8000 R09: ffff888e2ccedc10
R10: 0000000000000003 R11: ffffffffb3367634 R12: 00000000fe000000
R13: ffff888101d0da28 R14: ffffffffc2e437e0 R15: ffff888110b03b28
FS: 00007f3c1d4b3980(0000) GS:ffff888e33b80000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00005651cfc93578 CR3: 0000000124e4c002 CR4: 0000000000f70ef0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff07f0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
<TASK>
? __warn.cold+0xb6/0x176
? iounmap+0x58/0x1f0
? report_bug+0x1f4/0x2b0
? handle_bug+0x58/0x90
? exc_invalid_op+0x17/0x40
? asm_exc_invalid_op+0x1a/0x20
? iounmap+0x58/0x1f0
pmc_core_ssram_get_pmc+0x477/0x6c0 [intel_pmc_core]
? __pfx_pmc_core_ssram_get_pmc+0x10/0x10 [intel_pmc_core]
? __pfx_do_pci_enable_device+0x10/0x10
? pci_wait_for_pending+0x60/0x110
? pci_enable_device_flags+0x1e3/0x2e0
? __pfx_mtl_core_init+0x10/0x10 [intel_pmc_core]
pmc_core_ssram_init+0x7f/0x110 [intel_pmc_core]
mtl_core_init+0xda/0x130 [intel_pmc_core]
? __mutex_init+0xb9/0x130
pmc_core_probe+0x27e/0x10b0 [intel_pmc_core]
? _raw_spin_lock_irqsave+0x96/0xf0
? __pfx_pmc_core_probe+0x10/0x10 [intel_pmc_core]
? __pfx_mutex_unlock+0x10/0x10
? __pfx_mutex_lock+0x10/0x10
? device_pm_check_callbacks+0x82/0x370
? acpi_dev_pm_attach+0x234/0x2b0
platform_probe+0x9f/0x150
really_probe+0x1e0/0x8a0
__driver_probe_device+0x18c/0x370
? __pfx___driver_attach+0x10/0x10
driver_probe_device+0x4a/0x120
__driver_attach+0x190/0x4a0
? __pfx___driver_attach+0x10/0x10
bus_for_each_dev+0x103/0x180
? __pfx_bus_for_each_dev+0x10/0x10
? klist_add_tail+0x136/0x270
bus_add_driver+0x2fc/0x540
driver_register+0x1a5/0x360
? __pfx_pmc_core_driver_init+0x10/0x10 [intel_pmc_core]
do_one_initcall+0xa4/0x380
? __pfx_do_one_initcall+0x10/0x10
? kasan_unpoison+0x44/0x70
do_init_module+0x296/0x800
load_module+0x5090/0x6ce0
? __pfx_load_module+0x10/0x10
? ima_post_read_file+0x193/0x200
? __pfx_ima_post_read_file+0x10/0x10
? rw_verify_area+0x152/0x4c0
? kernel_read_file+0x257/0x750
? __pfx_kernel_read_file+0x10/0x10
? __pfx_filemap_get_read_batch+0x10/0x10
? init_module_from_file+0xd1/0x130
init_module_from_file+0xd1/0x130
? __pfx_init_module_from_file+0x10/0x10
? __pfx__raw_spin_lock+0x10/0x10
? __pfx_cred_has_capability.isra.0+0x10/0x10
idempotent_init_module+0x236/0x770
? __pfx_idempotent_init_module+0x10/0x10
? fdget+0x58/0x3f0
? security_capable+0x7d/0x110
__x64_sys_finit_module+0xbe/0x130
do_syscall_64+0x82/0x160
? __pfx_filemap_read+0x10/0x10
? __pfx___fsnotify_parent+0x10/0x10
? vfs_read+0x3a6/0xa30
? vfs_read+0x3a6/0xa30
? __seccomp_filter+0x175/0xc60
? __pfx___seccomp_filter+0x10/0x10
? fdget_pos+0x1ce/0x500
? syscall_exit_to_user_mode_prepare+0x149/0x170
? syscall_exit_to_user_mode+0x10/0x210
? do_syscall_64+0x8e/0x160
? switch_fpu_return+0xe3/0x1f0
? syscall_exit_to_user_mode+0x1d5/0x210
? do_syscall_64+0x8e/0x160
? exc_page_fault+0x76/0xf0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
RIP: 0033:0x7f3c1d6d155d
Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 83 58 0f 00 f7 d8 64 89 01 48
RSP: 002b:00007ffe6309db38 EFLAGS: 00000246 ORIG_RAX: 0000000000000139
RAX: ffffffffffffffda RBX: 0000557c212550a0 RCX: 00007f3c1d6d155d
RDX: 0000000000000000 RSI: 00007f3c1cd943bd RDI: 0000000000000025
RBP: 00007ffe6309dbf0 R08: 00007f3c1d7c7b20 R09: 00007ffe6309db80
R10: 0000557c21255270 R11: 0000000000000246 R12: 00007f3c1cd943bd
R13: 0000000000020000 R14: 0000557c21255c80 R15: 0000557c21255240
</TASK>
no_free_ptr(tmp_ssram) sets tmp_ssram NULL while assigning ssram.
pmc_core_iounmap calls iounmap unconditionally causing the above
warning to appear during boot.
Fix it by checking for a valid address before calling iounmap.
Also in the function pmc_core_ssram_get_pmc return -ENOMEM when
ioremap fails similar to other instances in the file.
Fixes: a01486dc4bb1 ("platform/x86/intel/pmc: Cleanup SSRAM discovery")
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: David E. Box <david.e.box@linux.intel.com>
Signed-off-by: Vamsi Krishna Brahmajosyula <vamsikrishna.brahmajosyula@gmail.com>
Link: https://lore.kernel.org/r/20241018104958.14195-1-vamsikrishna.brahmajosyula@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
when suspended"
Commit e86c8186d03a ("platform/x86:intel/pmc: Enable the ACPI PM Timer to
be turned off when suspended") can cause the suspend process to hang as
the pmcdev->lock in the pmc_core_acpi_pm_timer_suspend_resume might already
be held by the pmc_core_mphy_pg_show or pmc_core_pll_show if the userspace
gets frozen when these functions are being executed.
Also, pmc_core_acpi_pm_timer_suspend_resume must not sleep, as this
function is called indirectly by the tick_freeze function in
kernel/time/tick-common.c, which holds the spinlock.
Revert the changes for now to fix these issues.
Fixes: e86c8186d03a ("platform/x86:intel/pmc: Enable the ACPI PM Timer to be turned off when suspended")
Reported-by: Luca Coelho <luca@coelho.fi>
Closes: https://lore.kernel.org/lkml/40555604c3f4be43bf72e72d5409eaece4be9320.camel@coelho.fi/
Signed-off-by: Marek Maslanka <mmaslanka@google.com>
Link: https://lore.kernel.org/r/20241012182656.2107178-1-mmaslanka@google.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
for_each_endpoint_of_node() requires a call to of_node_put() for every
early exit. A new error path was added to the loop without observing
this requirement.
Add the missing call to of_node_put() in the error path.
Fixes: 1fb4dceeedc5 ("drm/bridge: tc358767: Add configurable default preemphasis")
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Link: https://lore.kernel.org/r/20241013-tc358767-of_node_put-v1-1-97431772c0ff@gmail.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241013-tc358767-of_node_put-v1-1-97431772c0ff@gmail.com
|
|
The assignment of the of_node to the aux bridge needs to mark the
of_node as reused as well, otherwise resource providers like pinctrl will
report a gpio as already requested by a different device when both pinconf
and gpios property are present.
Fix that by using the device_set_of_node_from_dev() helper instead.
Fixes: 6914968a0b52 ("drm/bridge: properly refcount DT nodes in aux bridge drivers")
Cc: stable@vger.kernel.org # 6.8
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20241018-drm-aux-bridge-mark-of-node-reused-v2-1-aeed1b445c7d@linaro.org
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241018-drm-aux-bridge-mark-of-node-reused-v2-1-aeed1b445c7d@linaro.org
|
|
detection issue
Add a DMI quirk for Samsung Galaxy Book2 to fix an initial lid state
detection issue.
The _LID device incorrectly returns the lid status as "closed" during
boot, causing the system to enter a suspend loop right after booting.
The quirk ensures that the correct lid state is reported initially,
preventing the system from immediately suspending after startup. It
only addresses the initial lid state detection and ensures proper
system behavior upon boot.
Signed-off-by: Shubham Panwar <shubiisp8@gmail.com>
Link: https://patch.msgid.link/20241020095045.6036-2-shubiisp8@gmail.com
[ rjw: Changelog edits ]
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The LG Gram Pro 16 2-in-1 (2024) the 16T90SP has its keybopard IRQ (1)
described as ActiveLow in the DSDT, which the kernel overrides to EdgeHigh
which breaks the keyboard.
Add the 16T90SP to the irq1_level_low_skip_override[] quirk table to fix
this.
Reported-by: Dirk Holten <dirk.holten@gmx.de>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219382
Cc: All applicable <stable@vger.kernel.org>
Suggested-by: Dirk Holten <dirk.holten@gmx.de>
Signed-off-by: Christian Heusel <christian@heusel.eu>
Link: https://patch.msgid.link/20241017-lg-gram-pro-keyboard-v2-1-7c8fbf6ff718@heusel.eu
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
PRMT needs to find the correct type of block to translate the PA-VA
mapping for EFI runtime services.
The issue arises because the PRMT is finding a block of type
EFI_CONVENTIONAL_MEMORY, which is not appropriate for runtime services
as described in Section 2.2.2 (Runtime Services) of the UEFI
Specification [1]. Since the PRM handler is a type of runtime service,
this causes an exception when the PRM handler is called.
[Firmware Bug]: Unable to handle paging request in EFI runtime service
WARNING: CPU: 22 PID: 4330 at drivers/firmware/efi/runtime-wrappers.c:341
__efi_queue_work+0x11c/0x170
Call trace:
Let PRMT find a block with EFI_MEMORY_RUNTIME for PRM handler and PRM
context.
If no suitable block is found, a warning message will be printed, but
the procedure continues to manage the next PRM handler.
However, if the PRM handler is actually called without proper allocation,
it would result in a failure during error handling.
By using the correct memory types for runtime services, ensure that the
PRM handler and the context are properly mapped in the virtual address
space during runtime, preventing the paging request error.
The issue is really that only memory that has been remapped for runtime
by the firmware can be used by the PRM handler, and so the region needs
to have the EFI_MEMORY_RUNTIME attribute.
Link: https://uefi.org/sites/default/files/resources/UEFI_Spec_2_10_Aug29.pdf # [1]
Fixes: cefc7ca46235 ("ACPI: PRM: implement OperationRegion handler for the PlatformRtMechanism subtype")
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Koba Ko <kobak@nvidia.com>
Reviewed-by: Matthew R. Ochs <mochs@nvidia.com>
Reviewed-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://patch.msgid.link/20241012205010.4165798-1-kobak@nvidia.com
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The caller of the function dev_pm_qos_add_request() checks again a non
zero value but dev_pm_qos_add_request() can return '1' if the request
already exists. Therefore, the setup function fails while the QoS
request actually did not failed.
Fix that by changing the check against a negative value like all the
other callers of the function.
Fixes: e44655617317 ("powercap/drivers/dtpm: Add dtpm devfreq with energy model support")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Link: https://patch.msgid.link/20241018021205.46460-1-yuancan@huawei.com
[ rjw: Subject edit ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Static analysis on linux-next has detected the following issue
in function virtnet_stats_ctx_init, in drivers/net/virtio_net.c :
if (vi->device_stats_cap & VIRTIO_NET_STATS_TYPE_CVQ) {
queue_type = VIRTNET_Q_TYPE_CQ;
ctx->bitmap[queue_type] |= VIRTIO_NET_STATS_TYPE_CVQ;
ctx->desc_num[queue_type] += ARRAY_SIZE(virtnet_stats_cvq_desc);
ctx->size[queue_type] += sizeof(struct virtio_net_stats_cvq);
}
ctx->bitmap is declared as a u32 however it is being bit-wise or'd with
VIRTIO_NET_STATS_TYPE_CVQ and this is defined as 1 << 32:
include/uapi/linux/virtio_net.h:#define VIRTIO_NET_STATS_TYPE_CVQ (1ULL << 32)
..and hence the bit-wise or operation won't set any bits in ctx->bitmap
because 1ULL < 32 is too wide for a u32.
In fact, the field is read into a u64:
u64 offset, bitmap;
....
bitmap = ctx->bitmap[queue_type];
so to fix, it is enough to make bitmap an array of u64.
Fixes: 941168f8b40e5 ("virtio_net: support device stats")
Reported-by: "Colin King (gmail)" <colin.i.king@gmail.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://patch.msgid.link/53e2bd6728136d5916e384a7840e5dc7eebff832.1729099611.git.mst@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The variable wwan_rtnl_link_ops assign a *bigger* maxtype which leads to
a global out-of-bounds read when parsing the netlink attributes. Exactly
same bug cause as the oob fixed in commit b33fb5b801c6 ("net: qualcomm:
rmnet: fix global oob in rmnet_policy").
==================================================================
BUG: KASAN: global-out-of-bounds in validate_nla lib/nlattr.c:388 [inline]
BUG: KASAN: global-out-of-bounds in __nla_validate_parse+0x19d7/0x29a0 lib/nlattr.c:603
Read of size 1 at addr ffffffff8b09cb60 by task syz.1.66276/323862
CPU: 0 PID: 323862 Comm: syz.1.66276 Not tainted 6.1.70 #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0x177/0x231 lib/dump_stack.c:106
print_address_description mm/kasan/report.c:284 [inline]
print_report+0x14f/0x750 mm/kasan/report.c:395
kasan_report+0x139/0x170 mm/kasan/report.c:495
validate_nla lib/nlattr.c:388 [inline]
__nla_validate_parse+0x19d7/0x29a0 lib/nlattr.c:603
__nla_parse+0x3c/0x50 lib/nlattr.c:700
nla_parse_nested_deprecated include/net/netlink.h:1269 [inline]
__rtnl_newlink net/core/rtnetlink.c:3514 [inline]
rtnl_newlink+0x7bc/0x1fd0 net/core/rtnetlink.c:3623
rtnetlink_rcv_msg+0x794/0xef0 net/core/rtnetlink.c:6122
netlink_rcv_skb+0x1de/0x420 net/netlink/af_netlink.c:2508
netlink_unicast_kernel net/netlink/af_netlink.c:1326 [inline]
netlink_unicast+0x74b/0x8c0 net/netlink/af_netlink.c:1352
netlink_sendmsg+0x882/0xb90 net/netlink/af_netlink.c:1874
sock_sendmsg_nosec net/socket.c:716 [inline]
__sock_sendmsg net/socket.c:728 [inline]
____sys_sendmsg+0x5cc/0x8f0 net/socket.c:2499
___sys_sendmsg+0x21c/0x290 net/socket.c:2553
__sys_sendmsg net/socket.c:2582 [inline]
__do_sys_sendmsg net/socket.c:2591 [inline]
__se_sys_sendmsg+0x19e/0x270 net/socket.c:2589
do_syscall_x64 arch/x86/entry/common.c:51 [inline]
do_syscall_64+0x45/0x90 arch/x86/entry/common.c:81
entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x7f67b19a24ad
RSP: 002b:00007f67b17febb8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 00007f67b1b45f80 RCX: 00007f67b19a24ad
RDX: 0000000000000000 RSI: 0000000020005e40 RDI: 0000000000000004
RBP: 00007f67b1a1e01d R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 00007ffd2513764f R14: 00007ffd251376e0 R15: 00007f67b17fed40
</TASK>
The buggy address belongs to the variable:
wwan_rtnl_policy+0x20/0x40
The buggy address belongs to the physical page:
page:ffffea00002c2700 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0xb09c
flags: 0xfff00000001000(reserved|node=0|zone=1|lastcpupid=0x7ff)
raw: 00fff00000001000 ffffea00002c2708 ffffea00002c2708 0000000000000000
raw: 0000000000000000 0000000000000000 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
page_owner info is not present (never set?)
Memory state around the buggy address:
ffffffff8b09ca00: 05 f9 f9 f9 05 f9 f9 f9 00 01 f9 f9 00 01 f9 f9
ffffffff8b09ca80: 00 00 00 05 f9 f9 f9 f9 00 00 03 f9 f9 f9 f9 f9
>ffffffff8b09cb00: 00 00 00 00 05 f9 f9 f9 00 00 00 00 f9 f9 f9 f9
^
ffffffff8b09cb80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
==================================================================
According to the comment of `nla_parse_nested_deprecated`, use correct size
`IFLA_WWAN_MAX` here to fix this issue.
Fixes: 88b710532e53 ("wwan: add interface creation support")
Signed-off-by: Lin Ma <linma@zju.edu.cn>
Reviewed-by: Loic Poulain <loic.poulain@linaro.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241015131621.47503-1-linma@zju.edu.cn
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The fb_io_mmap() function is used in the file operations but
not enabled in all configurations unless FB_IOMEM_FOPS gets
selected:
ld.lld-20: error: undefined symbol: fb_io_mmap
referenced by wm8505fb.c
drivers/video/fbdev/wm8505fb.o:(wm8505fb_ops) in archive vmlinux.a
Fixes: 11754a504608 ("fbdev/wm8505fb: Initialize fb_ops to fbdev I/O-memory helpers")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
In mac_probe() there are multiple calls to of_find_device_by_node(),
fman_bind() and fman_port_bind() which takes references to of_dev->dev.
Not all references taken by these calls are released later on error path
in mac_probe() and in mac_remove() which lead to reference leaks.
Add references release.
Fixes: 3933961682a3 ("fsl/fman: Add FMan MAC driver")
Signed-off-by: Aleksandr Mishin <amishin@t-argos.ru>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
