summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2021-12-22x86/MCE/AMD, EDAC/mce_amd: Support non-uniform MCA bank type enumerationYazen Ghannam
AMD systems currently lay out MCA bank types such that the type of bank number "i" is either the same across all CPUs or is Reserved/Read-as-Zero. For example: Bank # | CPUx | CPUy 0 LS LS 1 RAZ UMC 2 CS CS 3 SMU RAZ Future AMD systems will lay out MCA bank types such that the type of bank number "i" may be different across CPUs. For example: Bank # | CPUx | CPUy 0 LS LS 1 RAZ UMC 2 CS NBIO 3 SMU RAZ Change the structures that cache MCA bank types to be per-CPU and update smca_get_bank_type() to handle this change. Move some SMCA-specific structures to amd.c from mce.h, since they no longer need to be global. Break out the "count" for bank types from struct smca_hwid, since this should provide a per-CPU count rather than a system-wide count. Apply the "const" qualifier to the struct smca_hwid_mcatypes array. The values in this array should not change at runtime. Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com> Signed-off-by: Borislav Petkov <bp@suse.de> Link: https://lore.kernel.org/r/20211216162905.4132657-3-yazen.ghannam@amd.com
2021-12-22x86/MCE/AMD, EDAC/mce_amd: Add new SMCA bank typesYazen Ghannam
Add HWID and McaType values for new SMCA bank types, and add their error descriptions to edac_mce_amd. The "PHY" bank types all have the same error descriptions, and the NBIF and SHUB bank types have the same error descriptions. So reuse the same arrays where appropriate. [ bp: Remove useless comments over hwid types. ] Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com> Signed-off-by: Borislav Petkov <bp@suse.de> Link: https://lore.kernel.org/r/20211216162905.4132657-2-yazen.ghannam@amd.com
2021-12-22Merge tag 'arm-soc/for-5.17/drivers' of https://github.com/Broadcom/stblinux ↵Arnd Bergmann
into arm/dt This pull request contains Broadcom SoCs drivers changes for v5.17, please pull the following changes: - Wan adds a missing of_node_put() in the power management driver for MIPS SoCs. * tag 'arm-soc/for-5.17/drivers' of https://github.com/Broadcom/stblinux: soc: bcm: brcmstb: Add of_node_put() in pm-mips Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-12-22mtd: rawnand: omap2: Select GPMC device driver for ARCH_K3Roger Quadros
The GPMC device driver is required for NAND controller to work on K3 Architecture. Select it if required. Signed-off-by: Roger Quadros <rogerq@kernel.org> Acked-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/r/20211221131757.2030-5-rogerq@kernel.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
2021-12-22memory: omap-gpmc: Use a compatible match table when checking for NAND ↵Roger Quadros
controller As more compatibles can be added to the GPMC NAND controller driver use a compatible match table. Signed-off-by: Roger Quadros <rogerq@kernel.org> Acked-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/r/20211221131757.2030-4-rogerq@kernel.org [krzysztof: remove "is_nand" variable] Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
2021-12-22thunderbolt: Rename Intel TB_VSE_CAP_IECS capabilityGil Fine
Rename the VSC capability: TB_VSE_CAP_IECS to TB_VSE_CAP_CP_LP to follow the Intel devices namings as appear in the datasheet. This capability is used for controlling CLx (Low Power states of the link). Signed-off-by: Gil Fine <gil.fine@intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2021-12-22thunderbolt: Implement TMU time disruption for Intel Titan RidgeGil Fine
Intel Titan Ridge based routers have slightly different flow for time disruption than USB4 compliant routers. This makes it work on Titan Ridge too. Needed to enable link low power states on Titan Ridge. Signed-off-by: Gil Fine <gil.fine@intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2021-12-22thunderbolt: Move usb4_switch_wait_for_bit() to switch.cGil Fine
Currently usb4_switch_wait_for_bit() used only in usb4.c Moving to switch.c to call it from other files. Also change the prefix to "tb_" to follow to the naming convention. Signed-off-by: Gil Fine <gil.fine@intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2021-12-22thunderbolt: Add CL0s support for USB4 routersGil Fine
In this patch we add enabling of CL0s - a low power state of the link. Low power states (called collectively CLx) are used to reduce transmitter and receiver power when a high-speed lane is idle. For now, we add support only for first low power state: CL0s. We enable it, if both sides of the link support it, and only for the first hop router. (i.e. the first device that connected to the host router). This is needed for better thermal management. Signed-off-by: Gil Fine <gil.fine@intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2021-12-22thunderbolt: Add TMU uni-directional modeGil Fine
Up until Titan Ridge (Thunderbolt 3) device routers only supported bi-directional mode. In this patch we add to TMU a uni-directional mode. The uni-directional mode is needed for enabling of low power state of the link (CLx). Signed-off-by: Gil Fine <gil.fine@intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2021-12-22efi: apply memblock cap after memblock_add()Pingfan Liu
On arm64, during kdump kernel saves vmcore, it runs into the following bug: ... [ 15.148919] usercopy: Kernel memory exposure attempt detected from SLUB object 'kmem_cache_node' (offset 0, size 4096)! [ 15.159707] ------------[ cut here ]------------ [ 15.164311] kernel BUG at mm/usercopy.c:99! [ 15.168482] Internal error: Oops - BUG: 0 [#1] SMP [ 15.173261] Modules linked in: xfs libcrc32c crct10dif_ce ghash_ce sha2_ce sha256_arm64 sha1_ce sbsa_gwdt ast i2c_algo_bit drm_vram_helper drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops cec drm_ttm_helper ttm drm nvme nvme_core xgene_hwmon i2c_designware_platform i2c_designware_core dm_mirror dm_region_hash dm_log dm_mod overlay squashfs zstd_decompress loop [ 15.206186] CPU: 0 PID: 542 Comm: cp Not tainted 5.16.0-rc4 #1 [ 15.212006] Hardware name: GIGABYTE R272-P30-JG/MP32-AR0-JG, BIOS F12 (SCP: 1.5.20210426) 05/13/2021 [ 15.221125] pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 15.228073] pc : usercopy_abort+0x9c/0xa0 [ 15.232074] lr : usercopy_abort+0x9c/0xa0 [ 15.236070] sp : ffff8000121abba0 [ 15.239371] x29: ffff8000121abbb0 x28: 0000000000003000 x27: 0000000000000000 [ 15.246494] x26: 0000000080000400 x25: 0000ffff885c7000 x24: 0000000000000000 [ 15.253617] x23: 000007ff80400000 x22: ffff07ff80401000 x21: 0000000000000001 [ 15.260739] x20: 0000000000001000 x19: ffff07ff80400000 x18: ffffffffffffffff [ 15.267861] x17: 656a626f2042554c x16: 53206d6f72662064 x15: 6574636574656420 [ 15.274983] x14: 74706d6574746120 x13: 2129363930342065 x12: 7a6973202c302074 [ 15.282105] x11: ffffc8b041d1b148 x10: 00000000ffff8000 x9 : ffffc8b04012812c [ 15.289228] x8 : 00000000ffff7fff x7 : ffffc8b041d1b148 x6 : 0000000000000000 [ 15.296349] x5 : 0000000000000000 x4 : 0000000000007fff x3 : 0000000000000000 [ 15.303471] x2 : 0000000000000000 x1 : ffff07ff8c064800 x0 : 000000000000006b [ 15.310593] Call trace: [ 15.313027] usercopy_abort+0x9c/0xa0 [ 15.316677] __check_heap_object+0xd4/0xf0 [ 15.320762] __check_object_size.part.0+0x160/0x1e0 [ 15.325628] __check_object_size+0x2c/0x40 [ 15.329711] copy_oldmem_page+0x7c/0x140 [ 15.333623] read_from_oldmem.part.0+0xfc/0x1c0 [ 15.338142] __read_vmcore.constprop.0+0x23c/0x350 [ 15.342920] read_vmcore+0x28/0x34 [ 15.346309] proc_reg_read+0xb4/0xf0 [ 15.349871] vfs_read+0xb8/0x1f0 [ 15.353088] ksys_read+0x74/0x100 [ 15.356390] __arm64_sys_read+0x28/0x34 ... This bug introduced by commit b261dba2fdb2 ("arm64: kdump: Remove custom linux,usable-memory-range handling"), which moves memblock_cap_memory_range() to fdt, but it breaches the rules that memblock_cap_memory_range() should come after memblock_add() etc as said in commit e888fa7bb882 ("memblock: Check memory add/cap ordering"). As a consequence, the virtual address set up by copy_oldmem_page() does not bail out from the test of virt_addr_valid() in check_heap_object(), and finally hits the BUG_ON(). Since memblock allocator has no idea about when the memblock is fully populated, while efi_init() is aware, so tackling this issue by calling the interface early_init_dt_check_for_usable_mem_range() exposed by of/fdt. Fixes: b261dba2fdb2 ("arm64: kdump: Remove custom linux,usable-memory-range handling") Signed-off-by: Pingfan Liu <kernelfans@gmail.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: Zhen Lei <thunder.leizhen@huawei.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Mike Rapoport <rppt@kernel.org> Cc: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Frank Rowand <frowand.list@gmail.com> Cc: Ard Biesheuvel <ardb@kernel.org> Cc: Nick Terrell <terrelln@fb.com> Cc: linux-arm-kernel@lists.infradead.org To: devicetree@vger.kernel.org To: linux-efi@vger.kernel.org Acked-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20211215021348.8766-1-kernelfans@gmail.com
2021-12-22of: fdt: Aggregate the processing of "linux,usable-memory-range"Zhen Lei
Currently, we parse the "linux,usable-memory-range" property in early_init_dt_scan_chosen(), to obtain the specified memory range of the crash kernel. We then reserve the required memory after early_init_dt_scan_memory() has identified all available physical memory. Because the two pieces of code are separated far, the readability and maintainability are reduced. So bring them together. Suggested-by: Rob Herring <robh@kernel.org> Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> (change the prototype of early_init_dt_check_for_usable_mem_range(), in order to use it outside) Signed-off-by: Pingfan Liu <kernelfans@gmail.com> Tested-by: Dave Kleikamp <dave.kleikamp@oracle.com> Acked-by: John Donnelly <john.p.donnelly@oracle.com> Reviewed-by: Rob Herring <robh@kernel.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will@kernel.org> Cc: linux-arm-kernel@lists.infradead.org To: devicetree@vger.kernel.org To: linux-efi@vger.kernel.org Signed-off-by: Rob Herring <robh@kernel.org>
2021-12-22driver core: platform: document registration-failure requirementJohan Hovold
Add an explicit comment to document that the reference initialised by platform_device_register() needs to be released by a call to platform_device_put() also when registration fails (cf. device_register()). Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20211222104213.5673-1-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-22vdpa/mlx5: Use auxiliary_device driver data helpersDavid E. Box
Use auxiliary_get_drvdata and auxiliary_set_drvdata helpers. Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com> Signed-off-by: David E. Box <david.e.box@linux.intel.com> Link: https://lore.kernel.org/r/20211221235852.323752-5-david.e.box@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-22net/mlx5e: Use auxiliary_device driver data helpersDavid E. Box
Use auxiliary_get_drvdata and auxiliary_set_drvdata helpers. Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com> Signed-off-by: David E. Box <david.e.box@linux.intel.com> Link: https://lore.kernel.org/r/20211221235852.323752-4-david.e.box@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-22soundwire: intel: Use auxiliary_device driver data helpersDavid E. Box
Use auxiliary_get_drvdata and auxiliary_set_drvdata helpers. Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com> Signed-off-by: David E. Box <david.e.box@linux.intel.com> Link: https://lore.kernel.org/r/20211221235852.323752-3-david.e.box@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-22RDMA/irdma: Use auxiliary_device driver data helpersDavid E. Box
Use auxiliary_get_drvdata and auxiliary_set_drvdata helpers. Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com> Signed-off-by: David E. Box <david.e.box@linux.intel.com> Link: https://lore.kernel.org/r/20211221235852.323752-2-david.e.box@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-22platform/x86/intel: Move intel_pmt from MFD to Auxiliary BusDavid E. Box
Intel Platform Monitoring Technology (PMT) support is indicated by presence of an Intel defined PCIe Designated Vendor Specific Extended Capabilities (DVSEC) structure with a PMT specific ID. The current MFD implementation creates child devices for each PMT feature, currently telemetry, watcher, and crashlog. However DVSEC structures may also be used by Intel to indicate support for other features. The Out Of Band Management Services Module (OOBMSM) uses DVSEC to enumerate several features, including PMT. In order to support them it is necessary to modify the intel_pmt driver to handle the creation of the child devices more generically. To that end, modify the driver to create child devices for any VSEC/DVSEC features on supported devices (indicated by PCI ID). Additionally, move the implementation from MFD to the Auxiliary bus. VSEC/DVSEC features are really multifunctional PCI devices, not platform devices as MFD was designed for. Auxiliary bus gives more flexibility by allowing the definition of custom structures that can be shared between associated auxiliary devices and the parent device. Also, rename the driver from intel_pmt to intel_vsec to better reflect the purpose. This series also removes the current runtime pm support which was not complete to begin with. None of the current devices require runtime pm. However the support will be replaced when a device is added that requires it. Reviewed-by: Mark Gross <markgross@kernel.org> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: David E. Box <david.e.box@linux.intel.com> Link: https://lore.kernel.org/r/20211208015015.891275-4-david.e.box@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-22spi: ar934x: fix transfer and word delaysOskari Lemmela
Add missing delay between transferred messages and words. Signed-off-by: Oskari Lemmela <oskari@lemmela.net> Link: https://lore.kernel.org/r/20211222055958.1383233-3-oskari@lemmela.net Signed-off-by: Mark Brown <broonie@kernel.org>
2021-12-22spi: uniphier: Fix a bug that doesn't point to private data correctlyKunihiko Hayashi
In uniphier_spi_remove(), there is a wrong code to get private data from the platform device, so the driver can't be removed properly. The driver should get spi_master from the platform device and retrieve the private data from it. Cc: <stable@vger.kernel.org> Fixes: 5ba155a4d4cc ("spi: add SPI controller driver for UniPhier SoC") Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Link: https://lore.kernel.org/r/1640148492-32178-1-git-send-email-hayashi.kunihiko@socionext.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-12-22memory: omap-gpmc: Add support for GPMC on AM64 SoCRoger Quadros
The TI's AM64 SoC has the GPMC module. Add compatible for it. Traditionally GPMC external addresses have always been mapped to first 1GB physical address. However newer platforms, can have it mapped at different locations. Support this address provision via device tree. Signed-off-by: Roger Quadros <rogerq@kernel.org> Link: https://lore.kernel.org/r/20211221131757.2030-3-rogerq@kernel.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
2021-12-22memory: omap-gpmc: Use platform_get_irq() to get the interruptLad Prabhakar
platform_get_resource(pdev, IORESOURCE_IRQ, ..) relies on static allocation of IRQ resources in DT core code, this causes an issue when using hierarchical interrupt domains using "interrupts" property in the node as this bypasses the hierarchical setup and messes up the irq chaining. In preparation for removal of static setup of IRQ resource from DT core code use platform_get_irq(). Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Acked-by: Roger Quadros <rogerq@ti.com> Link: https://lore.kernel.org/r/20211221203916.18588-2-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
2021-12-22backlight: qcom-wled: Respect enabled-strings in set_brightnessMarijn Suijten
The hardware is capable of controlling any non-contiguous sequence of LEDs specified in the DT using qcom,enabled-strings as u32 array, and this also follows from the DT-bindings documentation. The numbers specified in this array represent indices of the LED strings that are to be enabled and disabled. Its value is appropriately used to setup and enable string modules, but completely disregarded in the set_brightness paths which only iterate over the number of strings linearly. Take an example where only string 2 is enabled with qcom,enabled_strings=<2>: this string is appropriately enabled but subsequent brightness changes would have only touched the zero'th brightness register because num_strings is 1 here. This is simply addressed by looking up the string for this index in the enabled_strings array just like the other codepaths that iterate over num_strings. Likewise enabled_strings is now also used in the autodetection path for consistent behaviour: when a list of strings is specified in DT only those strings will be probed for autodetection, analogous to how the number of strings that need to be probed is already bound by qcom,num-strings. After all autodetection uses the set_brightness helpers to set an initial value, which could otherwise end up changing brightness on a different set of strings. Fixes: 775d2ffb4af6 ("backlight: qcom-wled: Restructure the driver for WLED3") Fixes: 03b2b5e86986 ("backlight: qcom-wled: Add support for WLED4 peripheral") Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20211115203459.1634079-10-marijn.suijten@somainline.org
2021-12-22backlight: qcom-wled: Remove unnecessary double whitespaceMarijn Suijten
Remove redundant spaces inside for loop conditions. No other double spaces were found that are not part of indentation with `[^\s] `. Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20211115203459.1634079-9-marijn.suijten@somainline.org
2021-12-22backlight: qcom-wled: Provide enabled_strings default for WLED 4 and 5Marijn Suijten
Only WLED 3 sets a sensible default that allows operating this driver with just qcom,num-strings in the DT; WLED 4 and 5 require qcom,enabled-strings to be provided otherwise enabled_strings remains zero-initialized, resulting in every string-specific register write (currently only the setup and config functions, brightness follows in a future patch) to only configure the zero'th string multiple times. Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20211115203459.1634079-8-marijn.suijten@somainline.org
2021-12-22backlight: qcom-wled: Remove unnecessary 4th default string in WLED3Marijn Suijten
The previous commit improves num_strings parsing to not go over the maximum of 3 strings for WLED3 anymore. Likewise this default index for a hypothetical 4th string is invalid and could access registers that are not mapped to the desired purpose. Removing this value gets rid of undesired confusion and avoids the possibility of accessing registers at this offset even if the 4th array element is used by accident. Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20211115203459.1634079-7-marijn.suijten@somainline.org
2021-12-22backlight: qcom-wled: Override default length with qcom,enabled-stringsMarijn Suijten
The length of qcom,enabled-strings as property array is enough to determine the number of strings to be enabled, without needing to set qcom,num-strings to override the default number of strings when less than the default (which is also the maximum) is provided in DT. This also introduces an extra warning when qcom,num-strings is set, denoting that it is not necessary to set both anymore. It is usually more concise to set just qcom,num-length when a zero-based, contiguous range of strings is needed (the majority of the cases), or to only set qcom,enabled-strings when a specific set of indices is desired. Fixes: 775d2ffb4af6 ("backlight: qcom-wled: Restructure the driver for WLED3") Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20211115203459.1634079-6-marijn.suijten@somainline.org
2021-12-22backlight: qcom-wled: Fix off-by-one maximum with default num_stringsMarijn Suijten
When not specifying num-strings in the DT the default is used, but +1 is added to it which turns WLED3 into 4 and WLED4/5 into 5 strings instead of 3 and 4 respectively, causing out-of-bounds reads and register read/writes. This +1 exists for a deficiency in the DT parsing code, and is simply omitted entirely - solving this oob issue - by parsing the property separately much like qcom,enabled-strings. This also enables more stringent checks on the maximum value when qcom,enabled-strings is provided in the DT, by parsing num-strings after enabled-strings to allow it to check against (and in a subsequent patch override) the length of enabled-strings: it is invalid to set num-strings higher than that. The DT currently utilizes it to get around an incorrect fixed read of four elements from that array (has been addressed in a prior patch) by setting a lower num-strings where desired. Fixes: 93c64f1ea1e8 ("leds: add Qualcomm PM8941 WLED driver") Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org> Reviewed-By: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20211115203459.1634079-5-marijn.suijten@somainline.org
2021-12-22backlight: qcom-wled: Use cpu_to_le16 macro to perform conversionMarijn Suijten
The kernel already provides appropriate primitives to perform endianness conversion which should be used in favour of manual bit-wrangling. Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20211115203459.1634079-4-marijn.suijten@somainline.org
2021-12-22backlight: qcom-wled: Pass number of elements to read to read_u32_arrayMarijn Suijten
of_property_read_u32_array takes the number of elements to read as last argument. This does not always need to be 4 (sizeof(u32)) but should instead be the size of the array in DT as read just above with of_property_count_elems_of_size. To not make such an error go unnoticed again the driver now bails accordingly when of_property_read_u32_array returns an error. Surprisingly the indentation of newlined arguments is lining up again after prepending `rc = `. Fixes: 775d2ffb4af6 ("backlight: qcom-wled: Restructure the driver for WLED3") Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20211115203459.1634079-3-marijn.suijten@somainline.org
2021-12-22backlight: qcom-wled: Validate enabled string indices in DTMarijn Suijten
The strings passed in DT may possibly cause out-of-bounds register accesses and should be validated before use. Fixes: 775d2ffb4af6 ("backlight: qcom-wled: Restructure the driver for WLED3") Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20211115203459.1634079-2-marijn.suijten@somainline.org
2021-12-22backlight: lp855x: Add support ACPI enumerationHans de Goede
The Xiaomi Mi Pad 2 tablet uses an ACPI enumerated LP8556 backlight controller for its LCD-panel, with a Xiaomi specific ACPI HID of "XMCC0001", add support for this. Note the new "if (id)" check also fixes a NULL pointer deref when a user tries to manually bind the driver from sysfs. When CONFIG_ACPI is disabled acpi_match_device() will always return NULL, so the lp855x_parse_acpi() call will get optimized away. Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20211102225504.18920-3-hdegoede@redhat.com
2021-12-22backlight: lp855x: Add dev helper variable to lp855x_probe()Hans de Goede
Add a dev local variable to the lp855x_probe(), to replace "&cl->dev" and "lp->dev" in various places. Also switch to dev_err_probe() in one case which takes care of not printing -EPROBE_DEFER errors for us. This is mostly a preparation for adding ACPI enumeration support which will use the new "dev" variable more. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20211102225504.18920-2-hdegoede@redhat.com
2021-12-22backlight: lp855x: Move device_config setting out of lp855x_configure()Hans de Goede
Move the setting of the lp->cfg pointer to the chip specific lp855x_device_config struct from lp855x_configure() to lp855x_probe(), before calling lp855x_parse_dt(). This is a preperation patch for adding ACPI enumeration support. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20211102225504.18920-1-hdegoede@redhat.com
2021-12-22net: ks8851: Check for error irqJiasheng Jiang
Because platform_get_irq() could fail and return error irq. Therefore, it might be better to check it if order to avoid the use of error irq. Fixes: 797047f875b5 ("net: ks8851: Implement Parallel bus operations") Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-22drivers: net: smc911x: Check for error irqJiasheng Jiang
Because platform_get_irq() could fail and return error irq. Therefore, it might be better to check it if order to avoid the use of error irq. Fixes: ae150435b59e ("smsc: Move the SMC (SMSC) drivers") Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-22fjes: Check for error irqJiasheng Jiang
I find that platform_get_irq() will not always succeed. It will return error irq in case of the failure. Therefore, it might be better to check it if order to avoid the use of error irq. Fixes: 658d439b2292 ("fjes: Introduce FUJITSU Extended Socket Network Device driver") Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-22gpio: Remove unused local OF node pointersAndy Shevchenko
After the commit 448cf90513d9 ("gpio: Get rid of duplicate of_node assignment in the drivers") the OF node local pointers become unused. Remove them for good and make compiler happy about. Fixes: 448cf90513d9 ("gpio: Get rid of duplicate of_node assignment in the drivers") Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> [Bart: removed unrelated change in gpio-brcmstb] Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2021-12-22Bluetooth: btintel: Add missing quirks and msft ext for legacy bootloaderTedd Ho-Jeong An
This patch add missing HCI quirks and MSFT extension for legacy bootloader when it is running in the operational firmware. Signed-off-by: Tedd Ho-Jeong An <tedd.an@intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-12-22drm/i915: Require the vm mutex for i915_vma_bind()Thomas Hellström
Protect updates of struct i915_vma flags and async binding / unbinding with the vm::mutex. This means that i915_vma_bind() needs to assert vm::mutex held. In order to make that possible drop the caching of kmap_atomic() maps around i915_vma_bind(). An alternative would be to use kmap_local() but since we block cpu unplugging during sleeps inside kmap_local() sections this may have unwanted side-effects. Particularly since we might wait for gpu while holding the vm mutex. This change may theoretically increase execbuf cpu-usage on snb, but at least on non-highmem systems that increase should be very small. Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211221200050.436316-5-thomas.hellstrom@linux.intel.com
2021-12-22drm/i915: Break out the i915_deps utilityThomas Hellström
Since it's starting to be used outside the i915 TTM move code, move it to a separate set of files. v2: - Update the documentation. v4: - Rebase. Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211221200050.436316-4-thomas.hellstrom@linux.intel.com
2021-12-22drm/i915: remove questionable fence optimization during copyChristian König
First of all as discussed multiple times now kernel copies *must* always wait for all fences in a BO before actually doing the copy. This is mandatory. Additional to that drop the handling when there can't be a shared slot allocated on the source BO and just properly return an error code. Otherwise this code path would only be tested under out of memory conditions. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211221200050.436316-3-thomas.hellstrom@linux.intel.com Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
2021-12-22drm/i915: Avoid using the i915_fence_array when collecting dependenciesThomas Hellström
Since the gt migration code was using only a single fence for dependencies, these were collected in a dma_fence_array. However, it turns out that it's illegal to use some dma_fences in a dma_fence_array, in particular other dma_fence_arrays and dma_fence_chains, and this causes trouble for us moving forward. Have the gt migration code instead take a const struct i915_deps for dependencies. This means we can skip the dma_fence_array creation and instead pass the struct i915_deps instead to circumvent the problem. v2: - Make the prev_deps() function static. (kernel test robot <lkp@intel.com>) - Update the struct i915_deps kerneldoc. v4: - Rebase. Fixes: 5652df829b3c ("drm/i915/ttm: Update i915_gem_obj_copy_ttm() to be asynchronous") Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211221200050.436316-2-thomas.hellstrom@linux.intel.com
2021-12-22ath11k: add support of firmware logging for WCN6855Cheng Wang
Host enables WMI firmware logging feature via QMI message. Host receives firmware logging messages on WMI_DIAG_EVENTID, then sends logging messages to user space via event tracing infrastructure. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1 Signed-off-by: Cheng Wang <quic_chengwan@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20211220121053.357087-1-quic_chengwan@quicinc.com
2021-12-22ath11k: Fix napi related hangBen Greear
Similar to the same bug in ath10k, a napi disable w/out it being enabled will hang forever. I believe I saw this while trying rmmod after driver had some failure on startup. Fix it by keeping state on whether napi is enabled or not. And, remove un-used napi pointer in ath11k driver base struct. Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20200903195254.29379-1-greearb@candelatech.com
2021-12-22ath10k: replace strlcpy with strscpyJason Wang
The strlcpy should not be used because it doesn't limit the source length. So that it will lead some potential bugs. But the strscpy doesn't require reading memory from the src string beyond the specified "count" bytes, and since the return value is easier to error-check than strlcpy()'s. In addition, the implementation is robust to the string changing out from underneath it, unlike the current strlcpy() implementation. Thus, replace strlcpy with strscpy. Signed-off-by: Jason Wang <wangborong@cdjrlc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20211221070931.725720-1-wangborong@cdjrlc.com
2021-12-21net/mlx5e: Take packet_merge params directly from the RX res structTariq Toukan
As packet_merge params structure is saved on the RX resources structure, there is no need to pass it separately. Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Maxim Mikityanskiy <maximmi@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-12-21net/mlx5e: Allocate per-channel stats dynamically at first usageLama Kayal
Make stats allocation per-channel dynamic on demand, at channel open operation. Previously the stats array was pre-allocated for the maximum possible number of channels. Here we defer the per-channel stats instance allocation upon its first usage, so that it's allocated only if really needed. Allocating stats on demand helps maintain a more memory-efficient code, as we're saving memory when the used number of channels is smaller than the maximum. The stats memory instances are still freed in mlx5e_priv_arrays_free(), so that they are persistent to channels' closure. Memory size allocated for struct mlx5e_channel_stats is 3648 bytes. If maximum number of channel stands for 64, the total memory space allocated for stats is 3648x64 = 228K bytes. In scenarios where the number of channels in use is significantly smaller than maximum number, the memory saved can be remarkable. Signed-off-by: Lama Kayal <lkayal@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-12-21net/mlx5e: Use dynamic per-channel allocations in statsTariq Toukan
Make stats array an array of pointer. This patch comes in to prepare for the next patch where allocations of the stats are to be performed dynamically on first usage. Signed-off-by: Lama Kayal <lkayal@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-12-21net/mlx5e: Allow profile-specific limitation on max num of channelsTariq Toukan
Let SF/VF representor's netdev use profile-specific limitation on max_nch to reduce its memory and HW resources consumption. This is particularly important for environments with limited memory and high number of SFs. Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Vu Pham <vuhuong@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Reviewed-by: Parav Pandit <parav@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
generated by cgit (git 2.34.1) at 2025-09-15 18:44:44 +0000