summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2021-03-09USB: serial: ch341: add new Product IDNiv Sardi
Add PID for CH340 that's found on cheap programmers. The driver works flawlessly as soon as the new PID (0x9986) is added to it. These look like ANU232MI but ship with a ch341 inside. They have no special identifiers (mine only has the string "DB9D20130716" printed on the PCB and nothing identifiable on the packaging. The merchant i bought it from doesn't sell these anymore). the lsusb -v output is: Bus 001 Device 009: ID 9986:7523 Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 255 Vendor Specific Class bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 8 idVendor 0x9986 idProduct 0x7523 bcdDevice 2.54 iManufacturer 0 iProduct 0 iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 0x0027 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0x80 (Bus Powered) MaxPower 96mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 3 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 1 bInterfaceProtocol 2 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0020 1x 32 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0020 1x 32 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0008 1x 8 bytes bInterval 1 Signed-off-by: Niv Sardi <xaiki@evilgiggle.com> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org>
2021-03-09USB: serial: xr: fix NULL-deref on disconnectJohan Hovold
Claiming the sibling control interface is a bit more involved and specifically requires adding support to USB-serial core for managing either interface being unbound first, something which could otherwise lead to a NULL-pointer dereference. Similarly, additional infrastructure is also needed to handle suspend properly. Since the driver currently isn't actually using the control interface, we can defer this for now by simply not claiming the control interface. Fixes: c2d405aa86b4 ("USB: serial: add MaxLinear/Exar USB to Serial driver") Reported-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Tested-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Manivannan Sadhasivam <mani@kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2021-03-09USB: serial: cp210x: add some more GE USB IDsSebastian Reichel
GE CS1000 has some more custom USB IDs for CP2102N; add them to the driver to have working auto-probing. Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org>
2021-03-09USB: serial: cp210x: add ID for Acuity Brands nLight Air AdapterKaran Singhal
IDs of nLight Air Adapter, Acuity Brands, Inc.: vid: 10c4 pid: 88d8 Signed-off-by: Karan Singhal <karan.singhal@acuitybrands.com> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org>
2021-03-08atm: idt77252: fix null-ptr-dereferenceTong Zhang
this one is similar to the phy_data allocation fix in uPD98402, the driver allocate the idt77105_priv and store to dev_data but later dereference using dev->dev_data, which will cause null-ptr-dereference. fix this issue by changing dev_data to phy_data so that PRIV(dev) can work correctly. Signed-off-by: Tong Zhang <ztong0001@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-08atm: uPD98402: fix incorrect allocationTong Zhang
dev->dev_data is set in zatm.c, calling zatm_start() will overwrite this dev->dev_data in uPD98402_start() and a subsequent PRIV(dev)->lock (i.e dev->phy_data->lock) will result in a null-ptr-dereference. I believe this is a typo and what it actually want to do is to allocate phy_data instead of dev_data. Signed-off-by: Tong Zhang <ztong0001@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-08irqchip: Do not blindly select CONFIG_GENERIC_IRQ_MULTI_HANDLERMarc Zyngier
Implementing CONFIG_GENERIC_IRQ_MULTI_HANDLER is a decision that is made at the architecture level, and shouldn't involve the irqchip at all (we even provide a fallback helper when the option isn't selected). Drop all instances of such selection from non-arch code. Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20210217142800.2547737-1-maz@kernel.org Signed-off-by: Mark Rutland <mark.rutland@arm.com> Tested-by: Hector Martin <marcan@marcan.st> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: James Morse <james.morse@arm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will@kernel.org> Signed-off-by: Marc Zyngier <maz@kernel.org>
2021-03-08net: bonding: fix error return code of bond_neigh_init()Jia-Ju Bai
When slave is NULL or slave_ops->ndo_neigh_setup is NULL, no error return code of bond_neigh_init() is assigned. To fix this bug, ret is assigned with -EINVAL in these cases. Fixes: 9e99bfefdbce ("bonding: fix bond_neigh_init()") Reported-by: TOTE Robot <oslab@tsinghua.edu.cn> Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-08net: enetc: allow hardware timestamping on TX queues with tc-etf enabledVladimir Oltean
The txtime is passed to the driver in skb->skb_mstamp_ns, which is actually in a union with skb->tstamp (the place where software timestamps are kept). Since commit b50a5c70ffa4 ("net: allow simultaneous SW and HW transmit timestamping"), __sock_recv_timestamp has some logic for making sure that the two calls to skb_tstamp_tx: skb_tx_timestamp(skb) # Software timestamp in the driver -> skb_tstamp_tx(skb, NULL) and skb_tstamp_tx(skb, &shhwtstamps) # Hardware timestamp in the driver will both do the right thing and in a race-free manner, meaning that skb_tx_timestamp will deliver a cmsg with the software timestamp only, and skb_tstamp_tx with a non-NULL hwtstamps argument will deliver a cmsg with the hardware timestamp only. Why are races even possible? Well, because although the software timestamp skb->tstamp is private per skb, the hardware timestamp skb_hwtstamps(skb) lives in skb_shinfo(skb), an area which is shared between skbs and their clones. And skb_tstamp_tx works by cloning the packets when timestamping them, therefore attempting to perform hardware timestamping on an skb's clone will also change the hardware timestamp of the original skb. And the original skb might have been yet again cloned for software timestamping, at an earlier stage. So the logic in __sock_recv_timestamp can't be as simple as saying "does this skb have a hardware timestamp? if yes I'll send the hardware timestamp to the socket, otherwise I'll send the software timestamp", precisely because the hardware timestamp is shared. Instead, it's quite the other way around: __sock_recv_timestamp says "does this skb have a software timestamp? if yes, I'll send the software timestamp, otherwise the hardware one". This works because the software timestamp is not shared with clones. But that means we have a problem when we attempt hardware timestamping with skbs that don't have the skb->tstamp == 0. __sock_recv_timestamp will say "oh, yeah, this must be some sort of odd clone" and will not deliver the hardware timestamp to the socket. And this is exactly what is happening when we have txtime enabled on the socket: as mentioned, that is put in a union with skb->tstamp, so it is quite easy to mistake it. Do what other drivers do (intel igb/igc) and write zero to skb->tstamp before taking the hardware timestamp. It's of no use to us now (we're already on the TX confirmation path). Fixes: 0d08c9ec7d6e ("enetc: add support time specific departure base on the qos etf") Cc: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-08net: enetc: set MAC RX FIFO to recommended valueAlex Marginean
On LS1028A, the MAC RX FIFO defaults to the value 2, which is too high and may lead to RX lock-up under traffic at a rate higher than 6 Gbps. Set it to 1 instead, as recommended by the hardware design team and by later versions of the ENETC block guide. Signed-off-by: Alex Marginean <alexandru.marginean@nxp.com> Reviewed-by: Claudiu Manoil <claudiu.manoil@nxp.com> Reviewed-by: Jason Liu <jason.hui.liu@nxp.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-08net: davicom: Use platform_get_irq_optional()Paul Cercueil
The second IRQ line really is optional, so use platform_get_irq_optional() to obtain it. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-08net: davicom: Fix regulator not turned off on driver removalPaul Cercueil
We must disable the regulator that was enabled in the probe function. Fixes: 7994fe55a4a2 ("dm9000: Add regulator and reset support to dm9000") Signed-off-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-08net: davicom: Fix regulator not turned off on failed probePaul Cercueil
When the probe fails or requests to be defered, we must disable the regulator that was previously enabled. Fixes: 7994fe55a4a2 ("dm9000: Add regulator and reset support to dm9000") Signed-off-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-08net: wan: fix error return code of uhdlc_init()Jia-Ju Bai
When priv->rx_skbuff or priv->tx_skbuff is NULL, no error return code of uhdlc_init() is assigned. To fix this bug, ret is assigned with -ENOMEM in these cases. Reported-by: TOTE Robot <oslab@tsinghua.edu.cn> Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-08net: hisilicon: hns: fix error return code of hns_nic_clear_all_rx_fetch()Jia-Ju Bai
When hns_assemble_skb() returns NULL to skb, no error return code of hns_nic_clear_all_rx_fetch() is assigned. To fix this bug, ret is assigned with -ENOMEM in this case. Reported-by: TOTE Robot <oslab@tsinghua.edu.cn> Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-08net: usb: log errors to dmesg/syslogGrant Grundler
Errors in protocol should be logged when the driver aborts operations. If the driver can carry on and "humor" the device, then emitting the message as debug output level is fine. Signed-off-by: Grant Grundler <grundler@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-08net: usb: cdc_ncm: emit dev_err on error pathsGrant Grundler
Several error paths in bind/probe code will only emit output using dev_dbg. But if we are going to fail the bind/probe, emit related output with "err" priority. Signed-off-by: Grant Grundler <grundler@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-08net: ethernet: chelsio: inline_crypto: Mundane typos fixed throughout the ↵Bhaskar Chowdhury
file chcr_ktls.c Mundane typos fixes throughout the file. s/establised/established/ s/availbale/available/ s/vaues/values/ s/Incase/In case/ Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-08net: dsa: bcm_sf2: simplify optional reset handlingPhilipp Zabel
As of commit bb475230b8e5 ("reset: make optional functions really optional"), the reset framework API calls use NULL pointers to describe optional, non-present reset controls. This allows to unconditionally return errors from devm_reset_control_get_optional_exclusive. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-08drm/i915: Extend icl_sanitize_encoder_pll_mapping() to all DDI platformsVille Syrjälä
Now that all the encoder clock stuff is uniformly abstracted for all hsw+ platforms, let's extend icl_sanitize_encoder_pll_mapping() to cover all of them. Not sure there is a particular benefit in doing so, but less special cases always makes me happy. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210224144214.24803-7-ville.syrjala@linux.intel.com Reviewed-by: Mika Kahola <mika.kahola@intel.com>
2021-03-08drm/i915: Add encoder->is_clock_enabled()Ville Syrjälä
Support reading out the current state of the DDI clock. Not sure we really want this. Seems a bit excessive just to restore the debug print to icl_sanitize_encoder_pll_mapping()? But maybe there's more use for it? Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210224144214.24803-6-ville.syrjala@linux.intel.com Reviewed-by: Mika Kahola <mika.kahola@intel.com>
2021-03-08drm/i915: Move DDI clock readout to encoder->get_config()Ville Syrjälä
Move the *_get_ddi_pll() stuff into the encodet->get_config() hook. There it neatly sits next to the matching .{enable,disable}_clock() functions. In order to avoid excessive boilerplate I changed the behaviour such that all platforms now do the readout via crtc_state->port_dpll[]. ICL+ TC is still a bit special due to TBTPLL not having a functional .get_freq(). Should probably change that by adopting the LCPLL approach, but that would require a fairly substantial rework of the DPLL ID handling. So leave it for later. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210224144214.24803-5-ville.syrjala@linux.intel.com Reviewed-by: Mika Kahola <mika.kahola@intel.com>
2021-03-08drm/i915: Use pipes instead crtc indices in PLL state trackingVille Syrjälä
All the other places we have use pipes instead of crtc indices when tracking resource usage. Life is easier when we do it the same way always, so switch the dpll mgr to using pipes as well. Looks like it was actually mixing these up in some cases so it would not even have worked correctly except when the device has a contiguous set of pipes starting from pipe A. Granted, that is the typical case but supposedly it may not always hold on modern hw. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210224144214.24803-4-ville.syrjala@linux.intel.com Reviewed-by: Mika Kahola <mika.kahola@intel.com>
2021-03-08drm/i915: Do intel_dpll_readout_hw_state() after encoder readoutVille Syrjälä
The clock readout for DDI encoders needs to moved into the encoders. To that end intel_dpll_readout_hw_state() needs to happen after the encoder readout as otherwise it can't correctly populate the PLL crtc_mask/active_mask bitmasks. v2: Populate DPLL ref clocks before the encoder->get_config() Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210225161225.30746-1-ville.syrjala@linux.intel.com Reviewed-by: Mika Kahola <mika.kahola@intel.com>
2021-03-08drm/i915: Call primary encoder's .get_config() from MST .get_config()Ville Syrjälä
Stop assuming intel_ddi_get_config() is all we need from the primary encoder, and instead call it via the .get_config() vfunc. This will allow customized .get_config() for the primary, which I plan to use to handle the differences in the clock readout between various platforms. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210224144214.24803-2-ville.syrjala@linux.intel.com Reviewed-by: Mika Kahola <mika.kahola@intel.com>
2021-03-08drm/stm: dsi: Avoid printing errors for -EPROBE_DEFERYannick Fertre
Don't print error when probe deferred error is returned. Signed-off-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com> Signed-off-by: Yannick Fertre <yannick.fertre@foss.st.com> Tested-by: Yannick Fertre <yannick.fertre@foss.st.com> Signed-off-by: Philippe Cornu <philippe.cornu@foss.st.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210222092205.32086-2-raphael.gallais-pou@foss.st.com
2021-03-08drm/sched: select new rq even if there is only one v3Christian König
This is necessary when changing priorities of an entity. v2: test the sched_list instead of num_sched. v3: set the sched_list to NULL when there is only one entry Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Sonny Jiang <sonny.jiang@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210305125155.2312-1-christian.koenig@amd.com
2021-03-08gpiolib: Read "gpio-line-names" from a firmware nodeAndy Shevchenko
On STM32MP1, the GPIO banks are subnodes of pin-controller@50002000, see arch/arm/boot/dts/stm32mp151.dtsi. The driver for pin-controller@50002000 is in drivers/pinctrl/stm32/pinctrl-stm32.c and iterates over all of its DT subnodes when registering each GPIO bank gpiochip. Each gpiochip has: - gpio_chip.parent = dev, where dev is the device node of the pin controller - gpio_chip.of_node = np, which is the OF node of the GPIO bank Therefore, dev_fwnode(chip->parent) != of_fwnode_handle(chip.of_node), i.e. pin-controller@50002000 != pin-controller@50002000/gpio@5000*000. The original code behaved correctly, as it extracted the "gpio-line-names" from of_fwnode_handle(chip.of_node) = pin-controller@50002000/gpio@5000*000. To achieve the same behaviour, read property from the firmware node. Fixes: 7cba1a4d5e162 ("gpiolib: generalize devprop_gpiochip_set_names() for device properties") Reported-by: Marek Vasut <marex@denx.de> Reported-by: Roman Guskov <rguskov@dh-electronics.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by: Marek Vasut <marex@denx.de> Reviewed-by: Marek Vasut <marex@denx.de> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2021-03-08gpio: pca953x: Set IRQ type when handle Intel Galileo Gen 2Andy Shevchenko
The commit 0ea683931adb ("gpio: dwapb: Convert driver to using the GPIO-lib-based IRQ-chip") indeliberately made a regression on how IRQ line from GPIO I²C expander is handled. I.e. it reveals that the quirk for Intel Galileo Gen 2 misses the part of setting IRQ type which previously was predefined by gpio-dwapb driver. Now, we have to reorganize the approach to call necessary parts, which can be done via ACPI_GPIO_QUIRK_ABSOLUTE_NUMBER quirk. Without this fix and with above mentioned change the kernel hangs on the first IRQ event with: gpio gpiochip3: Persistence not supported for GPIO 1 irq 32, desc: 62f8fb50, depth: 0, count: 0, unhandled: 0 ->handle_irq(): 41c7b0ab, handle_bad_irq+0x0/0x40 ->irq_data.chip(): e03f1e72, 0xc2539218 ->action(): 0ecc7e6f ->action->handler(): 8a3db21e, irq_default_primary_handler+0x0/0x10 IRQ_NOPROBE set unexpected IRQ trap at vector 20 Fixes: ba8c90c61847 ("gpio: pca953x: Override IRQ for one of the expanders on Galileo Gen 2") Depends-on: 0ea683931adb ("gpio: dwapb: Convert driver to using the GPIO-lib-based IRQ-chip") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
2021-03-08gpiolib: acpi: Allow to find GpioInt() resource by name and indexAndy Shevchenko
Currently only search by index is supported. However, in some cases we might need to pass the quirks to the acpi_dev_gpio_irq_get(). For this, split out acpi_dev_gpio_irq_get_by() and replace acpi_dev_gpio_irq_get() by calling above with NULL for name parameter. Fixes: ba8c90c61847 ("gpio: pca953x: Override IRQ for one of the expanders on Galileo Gen 2") Depends-on: 0ea683931adb ("gpio: dwapb: Convert driver to using the GPIO-lib-based IRQ-chip") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2021-03-08gpiolib: acpi: Add ACPI_GPIO_QUIRK_ABSOLUTE_NUMBER quirkAndy Shevchenko
On some systems the ACPI tables has wrong pin number and instead of having a relative one it provides an absolute one in the global GPIO number space. Add ACPI_GPIO_QUIRK_ABSOLUTE_NUMBER quirk to cope with such cases. Fixes: ba8c90c61847 ("gpio: pca953x: Override IRQ for one of the expanders on Galileo Gen 2") Depends-on: 0ea683931adb ("gpio: dwapb: Convert driver to using the GPIO-lib-based IRQ-chip") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2021-03-08gpiolib: acpi: Add missing IRQF_ONESHOTYang Li
fixed the following coccicheck: ./drivers/gpio/gpiolib-acpi.c:176:7-27: ERROR: Threaded IRQ with no primary handler requested without IRQF_ONESHOT Make sure threaded IRQs without a primary handler are always request with IRQF_ONESHOT Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2021-03-08gpio: fix gpio-device list corruptionJohan Hovold
Make sure to hold the gpio_lock when removing the gpio device from the gpio_devices list (when dropping the last reference) to avoid corrupting the list when there are concurrent accesses. Fixes: ff2b13592299 ("gpio: make the gpiochip a real device") Cc: stable@vger.kernel.org # 4.6 Reviewed-by: Saravana Kannan <saravanak@google.com> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2021-03-08gpio: fix NULL-deref-on-deregistration regressionJohan Hovold
Fix a NULL-pointer deference when deregistering the gpio character device that was introduced by the recent stub-driver hack. When the new "driver" is unbound as part of deregistration, driver core clears the driver-data pointer which is used to retrieve the struct gpio_device in its release callback. Fix this by using container_of() in the release callback as should have been done all along. Fixes: 4731210c09f5 ("gpiolib: Bind gpio_device to a driver to enable fw_devlink=on by default") Cc: Saravana Kannan <saravanak@google.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reported-by: syzbot+d27b4c8adbbff70fbfde@syzkaller.appspotmail.com Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2021-03-08crypto: mips/poly1305 - enable for all MIPS processorsMaciej W. Rozycki
The MIPS Poly1305 implementation is generic MIPS code written such as to support down to the original MIPS I and MIPS III ISA for the 32-bit and 64-bit variant respectively. Lift the current limitation then to enable code for MIPSr1 ISA or newer processors only and have it available for all MIPS processors. Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk> Fixes: a11d055e7a64 ("crypto: mips/poly1305 - incorporate OpenSSL/CRYPTOGAMS optimized implementation") Cc: stable@vger.kernel.org # v5.5+ Acked-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-03-08cpufreq: blacklist Arm Vexpress platforms in cpufreq-dt-platdevSudeep Holla
Add "arm,vexpress" to cpufreq-dt-platdev blacklist since the actual scaling is handled by the firmware cpufreq drivers(scpi, scmi and vexpress-spc). Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2021-03-08cpufreq: qcom-hw: Fix return value check in qcom_cpufreq_hw_cpu_init()Wei Yongjun
In case of error, the function ioremap() returns NULL pointer not ERR_PTR(). The IS_ERR() test in the return value check should be replaced with NULL test. Fixes: 67fc209b527d ("cpufreq: qcom-hw: drop devm_xxx() calls from init/exit hooks") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2021-03-08cpufreq: qcom-hw: fix dereferencing freed memory 'data'Shawn Guo
Commit 67fc209b527d ("cpufreq: qcom-hw: drop devm_xxx() calls from init/exit hooks") introduces an issue of dereferencing freed memory 'data'. Fix it. Fixes: 67fc209b527d ("cpufreq: qcom-hw: drop devm_xxx() calls from init/exit hooks") Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2021-03-08drm/stm: ltdc: Use simple encoderJagan Teki
STM ltdc driver uses an empty implementation for its encoder. Replace the code with the generic simple encoder. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Tested-by: Yannick Fertre <yannick.fertre@foss.st.com> Signed-off-by: Philippe Cornu <philippe.cornu@foss.st.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210302175700.28640-1-jagan@amarulasolutions.com
2021-03-08s390/cio: return -EFAULT if copy_to_user() failsEric Farman
Fixes: 120e214e504f ("vfio: ccw: realize VFIO_DEVICE_G(S)ET_IRQ_INFO ioctls") Signed-off-by: Eric Farman <farman@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-03-08s390/tty3270: avoid comma separated statementsJoe Perches
Use semicolons and braces. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Link: https://lore.kernel.org/r/9988babd9cca4ac841961d9f0bbf5e49caa87659.1598331149.git.joe@perches.com Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-03-08s390/crypto: return -EFAULT if copy_to_user() failsWang Qing
The copy_to_user() function returns the number of bytes remaining to be copied, but we want to return -EFAULT if the copy doesn't complete. Fixes: e06670c5fe3b ("s390: vfio-ap: implement VFIO_DEVICE_GET_INFO ioctl") Signed-off-by: Wang Qing <wangqing@vivo.com> Reviewed-by: Tony Krowiak <akrowiak@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Link: https://lore.kernel.org/r/1614600502-16714-1-git-send-email-wangqing@vivo.com Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-03-08s390/cio: return -EFAULT if copy_to_user() failsWang Qing
The copy_to_user() function returns the number of bytes remaining to be copied, but we want to return -EFAULT if the copy doesn't complete. Fixes: e01bcdd61320 ("vfio: ccw: realize VFIO_DEVICE_GET_REGION_INFO ioctl") Signed-off-by: Wang Qing <wangqing@vivo.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Link: https://lore.kernel.org/r/1614600093-13992-1-git-send-email-wangqing@vivo.com Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-03-08s390/zcore: release dump save area on restart or power downAlexander Egorenkov
The zFCP/NVMe standalone dumper is supposed to release the dump save area resource as soon as possible but might fail to do so, for instance, if it crashes. To avoid this situation, register a reboot notifier and ensure the dump save area resource is released on reboot or power down. Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com> Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-03-08s390/zcore: no need to check return value of debugfs_create functionsAlexander Egorenkov
When calling debugfs functions, there is no need to ever check the return value. The function can work or not, but the code logic should never do something different based on this. See commit 7dd541a3fb34 ("s390: no need to check return value of debugfs_create functions"). Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-03-08s390/time,idle: get rid of unsigned long longHeiko Carstens
Get rid of unsigned long long, and use unsigned long instead everywhere. The usage of unsigned long long is a leftover from 31 bit kernel support. Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-03-07Merge tag 'powerpc-5.12-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: "One non-fix, the conversion of vio_driver->remove() to return void, which touches various powerpc specific drivers. Fix the privilege checks we do in our perf handling, which could cause soft/hard lockups in some configurations. Fix a bug with IRQ affinity seen on kdump kernels when CPU 0 is offline in the second kernel. Fix missed page faults after mprotect(..., PROT_NONE) on 603 (32-bit). Fix a bug in our VSX (vector) instruction emulation, which should only be seen when doing VSX ops to cache inhibited mappings. Three commits fixing various build issues with obscure configurations. Thanks to Athira Rajeev, Cédric Le Goater, Christophe Leroy, Christoph Plattner, Greg Kurz, Jordan Niethe, Laurent Vivier, Ravi Bangoria, Tyrel Datwyler, and Uwe Kleine-König" * tag 'powerpc-5.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/sstep: Fix VSX instruction emulation powerpc/perf: Fix handling of privilege level checks in perf interrupt context powerpc: Force inlining of mmu_has_feature to fix build failure vio: make remove callback return void powerpc/syscall: Force inlining of __prep_irq_for_enabled_exit() powerpc/603: Fix protection of user pages mapped with PROT_NONE powerpc/pseries: Don't enforce MSI affinity with kdump powerpc/4xx: Fix build errors from mfdcr()
2021-03-07drm/ingenic: Fix non-OSD modePaul Cercueil
Even though the JZ4740 did not have the OSD mode, it had (according to the documentation) two DMA channels, but there is absolutely no information about how to select the second DMA channel. Make the ingenic-drm driver work in non-OSD mode by using the foreground0 plane (which is bound to the DMA0 channel) as the primary plane, instead of the foreground1 plane, which is the primary plane when in OSD mode. Fixes: 3c9bea4ef32b ("drm/ingenic: Add support for OSD mode") Cc: <stable@vger.kernel.org> # v5.8+ Signed-off-by: Paul Cercueil <paul@crapouillou.net> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Tested-by: H. Nikolaus Schaller <hns@goldelico.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210124085552.29146-5-paul@crapouillou.net
2021-03-07efi: stub: omit SetVirtualAddressMap() if marked unsupported in RT_PROP tableArd Biesheuvel
The EFI_RT_PROPERTIES_TABLE contains a mask of runtime services that are available after ExitBootServices(). This mostly does not concern the EFI stub at all, given that it runs before that. However, there is one call that is made at runtime, which is the call to SetVirtualAddressMap() (which is not even callable at boot time to begin with) So add the missing handling of the RT_PROP table to ensure that we only call SetVirtualAddressMap() if it is not being advertised as unsupported by the firmware. Cc: <stable@vger.kernel.org> # v5.10+ Tested-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
2021-03-05Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds
Pull rdma fixes from Jason Gunthorpe: "Nothing special here, though Bob's regression fixes for rxe would have made it before the rc cycle had there not been such strong winter weather! - Fix corner cases in the rxe reference counting cleanup that are causing regressions in blktests for SRP - Two kdoc fixes so W=1 is clean - Missing error return in error unwind for mlx5 - Wrong lock type nesting in IB CM" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: RDMA/rxe: Fix errant WARN_ONCE in rxe_completer() RDMA/rxe: Fix extra deref in rxe_rcv_mcast_pkt() RDMA/rxe: Fix missed IB reference counting in loopback RDMA/uverbs: Fix kernel-doc warning of _uverbs_alloc RDMA/mlx5: Set correct kernel-doc identifier IB/mlx5: Add missing error code RDMA/rxe: Fix missing kconfig dependency on CRYPTO RDMA/cm: Fix IRQ restore in ib_send_cm_sidr_rep
generated by cgit (git 2.34.1) at 2025-10-01 08:11:48 +0000