| Age | Commit message (Collapse) | Author |
|---|
|
There are intermittent GDSC power-up failures observed for titan top
gdsc, which requires the XO clock. Thus mark all the MM XO clocks always
enabled from probe.
Fixes: 8d4025943e13 ("clk: qcom: camcc-sc7180: Use runtime PM ops instead of clk ones")
Signed-off-by: Taniya Das <tdas@codeaurora.org>
Link: https://lore.kernel.org/r/1611128871-5898-1-git-send-email-tdas@codeaurora.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Add clocks provides by RPMH in the Qualcomm SC8180x platform.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210120223741.1610344-2-bjorn.andersson@linaro.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
For some reason global GFM_MASK ended up with bit 1 instead of bit 0.
Remove the global GFM_MASK and reuse mux_mask field.
Fixes: a2d8f507803e ("clk: qcom: Add support to LPASS AUDIO_CC Glitch Free Mux clocks")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20210119113851.18946-1-srinivas.kandagatla@linaro.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Add a driver for the SDX55 APCS clock controller. It is part of the APCS
hardware block, which among other things implements also a combined mux
and half integer divider functionality. The APCS clock controller has 3
parent clocks:
1. Board XO
2. Fixed rate GPLL0
3. A7 PLL
This is required for enabling CPU frequency scaling on SDX55-based
platforms.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20210118041156.50016-6-manivannan.sadhasivam@linaro.org
[sboyd@kernel.org: Fix unused ret in probe by hardcoding it]
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Add support for PLL found in Qualcomm SDX55 platforms which is used to
provide clock to the Cortex A7 CPU via a mux. This PLL can provide high
frequency clock to the CPU above 1GHz as compared to the other sources
like GPLL0.
In this driver, the power domain is attached to the cpudev. This is
required for CPUFreq functionality and there seems to be no better place
to do other than this driver (no dedicated CPUFreq driver).
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20210118041156.50016-5-manivannan.sadhasivam@linaro.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
DEFINE_DEBUGFS_ATTRIBUTE
Fix the following coccicheck warning:
drivers/memory/tegra/tegra186-emc.c:158:0-23: WARNING:
tegra186_emc_debug_max_rate_fops should be defined with DEFINE_DEBUGFS_ATTRIBUTE.
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Link: https://lore.kernel.org/r/1612684970-125948-1-git-send-email-jiapeng.chong@linux.alibaba.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
|
|
Correct kerneldoc to fix W=1 warnings:
drivers/memory/samsung/exynos5422-dmc.c:290: warning:
expecting prototype for find_target_freq_id(). Prototype was for find_target_freq_idx() instead
drivers/memory/samsung/exynos5422-dmc.c:1015: warning:
expecting prototype for exynos5_dmc_align_initial_frequency(). Prototype was for exynos5_dmc_align_init_freq() instead
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Link: https://lore.kernel.org/r/20210206111715.20774-1-krzk@kernel.org
|
|
The driver can match only via the DT table so the table should be always
used and the of_match_ptr does not have any sense (this also allows ACPI
matching via PRP0001, even though it might be not relevant here). This
fixes compile warning (!CONFIG_OF with clang):
drivers/memory/ti-emif-pm.c:238:34: warning:
unused variable 'ti_emif_of_match' [-Wunused-const-variable]
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20210206111343.19273-1-krzk@kernel.org
|
|
mt76 patches for 5.12
* add new mt7921e driver
* factor out common code shared between 7615/7663 and 7921
* performance optimizations
* 7915 dbdc fixes
* 802.11 encap offload support
* support for multiple pcie gen1 host interfaces on 7915
* 7915 testmode support
* bugfixes
* testmode support enhancements
* endian fixes
* 7915 txbf support
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next
iwlwifi patches intended for v5.12
* Check FW notification sizes for robustness;
* Improvements in the NAPI implementation;
* Implement a workaround for CCA-EXT;
* Add new FW API support;
* Fix a CSA bug;
* Implement PHY integration version parsing;
* A bit of refactoring;
* One more CSA bug fix, this time in the AP side;
* Support for new So devices and a bit of reorg;
* Per Platform Antenna Gain (PPAG) fixes and improvements;
* Improvements in the debug framework;
* Some other clean-ups and small fixes.
# gpg: Signature made Fri 05 Feb 2021 12:04:21 PM EET using RSA key ID 1A3CC5FA
# gpg: Good signature from "Luciano Roth Coelho (Luca) <luca@coelho.fi>"
# gpg: aka "Luciano Roth Coelho (Intel) <luciano.coelho@intel.com>"
|
|
LVM doesn't like it when the target returns different values from what
was set in the constructor. Fix dm-writecache so that the returned
table values are exactly the same as requested values.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org # v4.18+
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
Graph Compiler uses DMA5 in a non-standard way and it requires the
driver to disable clock gating on that DMA.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
When user gives us a block address to get its ID to mmap it, he also
needs to get from us the block size to pass to the driver in the mmap
function.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
when reading CPU_BOOT_DEV_STS0 reg after FW reports SRAM AVAILABLE the
value in the register might not yet be updated by FW.
to overcome this issue another "up-to-date" read of this register is
done at the end of CPU queues init.
Signed-off-by: Ohad Sharabi <osharabi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
Only after the initialization of the device is done, the driver is
ready to receive events from the F/W. The driver can't handle events
before that because of races so it will ignore events. In case of
a fatal event, the driver won't know about it and the device will be
operational although it shouldn't be.
Same logic should be applied after hard-reset.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
driver should use ECC info from FW only if HBM ECC CAP is set.
otherwise, try to fetch the data from MC regs only if security is
disabled.
Signed-off-by: Ohad Sharabi <osharabi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
User must be aware of the available CQs when it needs to use them.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
Current messaging communictaion protocol with cpucp can get out
of sync due to coherency issues. In order to improve the protocol
reliability, we modify the protocol to expect a different
acknowledgment for every packet sent to cpucp.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
Need to add ull suffix to constant when doing shift of constant
into 64-bit variables
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
The only usage of it is to assign its address to the ops field in the
regulator_desc struct, which is a pointer to const struct regulator_ops.
Make it const to allow the compiler to put it in read-only memory.
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Link: https://lore.kernel.org/r/20210206232152.58046-1-rikard.falkeborn@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Some Surface Book 2 and 3 models have a discrete GPU (dGPU) that is
hot-pluggable. On those devices, the dGPU is contained in the base,
which can be separated from the tablet part (containing CPU and
touchscreen) while the device is running.
It (in general) is presented as/behaves like a standard PCIe hot-plug
capable device, however, this device can also be put into D3cold. In
D3cold, the device itself is turned off and can thus not submit any
standard PCIe hot-plug events. To properly detect hot-(un)plugging while
the dGPU is in D3cold, out-of-band signaling is required. Without this,
the device state will only get updated during the next bus-check, eg.
via a manually issued lspci call.
This commit adds a driver to handle out-of-band PCIe hot-(un)plug events
on Microsoft Surface devices. On those devices, said events can be
detected via GPIO interrupts, which are then forwarded to the
corresponding ACPI DSM calls by this driver. The DSM then takes care of
issuing the appropriate bus-/device-check, causing the PCI core to
properly pick up the device change.
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20210205012657.1951753-1-luzmaximilian@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
A bio allocated by bio_alloc_bioset comes pre-zeroed, no need to
clear random fields.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Song Liu <song@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd into asoc-5.12
Immutable branch between MFD and [XXX] due for the v5.12 merge window
|
|
Remove spaces preceding closing brace of one of the nested if statement
blocks inside the rtl92e_leisure_ps_leave function, and replace with a
tab, to align it properly with the start of the block. Fixes a
checkpatch warning.
Signed-off-by: Phillip Potter <phil@philpotter.co.uk>
Link: https://lore.kernel.org/r/20210207194944.113613-1-phil@philpotter.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This removes the braces from the if statement that checks the
wps_ie_len and ieee->wps_ie values in rtllib_association_req of
rtllib_softmac.c as this block contains only one statement.
Fixes a checkpatch warning.
Signed-off-by: Phillip Potter <phil@philpotter.co.uk>
Link: https://lore.kernel.org/r/20210207225703.114229-1-phil@philpotter.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When the firmware rejects a frame (because station become asleep or
disconnected), the frame is re-queued in mac80211. However, the
re-queued frame was 8 bytes longer than the original one (the size of
the ICV for the encryption). So, when mac80211 try to send this frame
again, it is a little bigger than expected.
If the frame is re-queued secveral time it end with a skb_over_panic
because the skb buffer is not large enough.
Note it only happens when device acts as an AP and encryption is
enabled.
This patch more or less reverts the commit 049fde130419 ("staging: wfx:
drop useless field from struct wfx_tx_priv").
Fixes: 049fde130419 ("staging: wfx: drop useless field from struct wfx_tx_priv")
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20210208135254.399964-1-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch fixes warnings of 'checkpatch.pl'. According to
Linux coding guidelines, code should be aligned properly to
match with open parenthesis and lines should not end with
open parenthesis.
Signed-off-by: Mahak Gupta <gmahak1@gmail.com>
Link: https://lore.kernel.org/r/20210208025904.25928-1-gmahak1@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Constify two static structs which are never modified, to allow the
compiler to put them in read-only memory.
The only usage of controller_attribute_group is to put its address in an
array of pointers to const struct attribute_group, and the only usage of
can_power_ops is to assign its address to the 'ops' field in the
regulator_desc struct, which is a pointer to const struct regulator_ops.
Reviewed-by: Sven Van Asbroeck <TheSven73@gmail.com>
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Link: https://lore.kernel.org/r/20210207202501.9494-1-rikard.falkeborn@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The "req" struct is always added to the "wm831x->auxadc_pending" list,
but it's only removed from the list on the success path. If a failure
occurs then the "req" struct is freed but it's still on the list,
leading to a use after free.
Fixes: 78bb3688ea18 ("mfd: Support multiple active WM831x AUXADC conversions")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|
After a reset event, the device automatically triggers ATI at the
default core clock frequency (16 MHz). Soon afterward, the driver
loads firmware which may attempt to lower the frequency.
If this initial ATI cycle is still in progress when the frequency
is changed, however, the device incorrectly reports channels 0, 1
and 2 to be in a state of touch once ATI finally completes.
To solve this problem, wait until ATI is complete before lowering
the frequency. Because this particular ATI cycle occurs following
a reset event, its duration is predictable and a simple delay can
suffice.
Signed-off-by: Jeff LaBundy <jeff@labundy.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|
After loading firmware, the driver triggers ATI (calibration) with
the newly loaded register configuration in place. Next, the driver
polls a register field to ensure ATI completed in a timely fashion
and that the device is ready to sense.
However, communicating with the device over I2C while ATI is under-
way may induce noise in the device and cause ATI to fail. As such,
the vendor recommends not to poll the device during ATI.
To solve this problem, let the device naturally signal to the host
that ATI is complete by way of an interrupt. A completion prevents
the sub-devices from being registered until this happens.
The former logic that scaled ATI timeout and filter settling delay
is not carried forward with the new implementation, as it produces
overly conservative delays at lower clock rates. Instead, a single
pair of delays that covers all cases is used.
Signed-off-by: Jeff LaBundy <jeff@labundy.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|
The time the device takes to deassert its RDY output following an
I2C stop condition scales with the core clock frequency.
To prevent level-triggered interrupts from being reasserted after
the interrupt handler returns, increase the time before returning
to account for the worst-case delay (~90 us) plus margin.
Signed-off-by: Jeff LaBundy <jeff@labundy.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|
The regmap member of the driver's private data is called 'regmap',
but the regmap_config struct is called 'iqs62x_map_config'. Rename
the latter to 'iqs62x_regmap_config' for consistency.
Signed-off-by: Jeff LaBundy <jeff@labundy.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|
The register write that performed a mandatory soft reset during
probe was removed during development of the driver, however the
IQS62X_SYS_SETTINGS_SOFT_RESET bit mask was left behind. Remove
it to keep stray macros out of the driver.
Signed-off-by: Jeff LaBundy <jeff@labundy.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|
Previously, all instances of the /* fall through */ comment were
preceded by a newline to improve readability.
Now that /* fall through */ comments have been replaced with the
fallthrough pseudo-keyword, the leftover whitespace looks out of
place and can simply be removed.
Fixes: df561f6688fe ("treewide: Use fallthrough pseudo-keyword")
Signed-off-by: Jeff LaBundy <jeff@labundy.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|
Add Intel Alder Lake LPSS PCI IDs.
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|
Create two sysfs entries for exposing the MAC address and count
from the MAX10 BMC register space. The MAC address is the first
in a sequential block of MAC addresses reserved for the FPGA card.
The MAC count is the number of MAC addresses in the reserved block.
Signed-off-by: Russ Weight <russell.h.weight@intel.com>
Signed-off-by: Xu Yilun <yilun.xu@intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|
Acer Iconia Tab A500 is an Android tablet device, it has ENE KB930
Embedded Controller which provides battery-gauge, LED, GPIO and some
other functions. The EC uses firmware that is specifically customized
for Acer A500. This patch adds MFD driver for the Embedded Controller
which allows to power-off / reboot the A500 device, it also provides
a common register read/write API that will be used by the sub-devices.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|
Add Intel Alder Lake LPSS PCI IDs.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|
The Gateworks System Controller has an active-low interrupt.
Fix the interrupt request type.
Cc: <stable@vger.kernel.org>
Fixes: d85234994b2f ("mfd: Add Gateworks System Controller core driver")
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|
Start all helpers with "MFD_CELL_".
Cc: Gene Chen <gene_chen@richtek.com>
Cc: linux-mediatek@lists.infradead.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|
Don't open-code DIV_ROUND_UP() kernel macro.
Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|
Add of_compatible ("maxim,max8997-muic") to the mfd_cell to have a
of_node set in the extcon driver.
Add of_compatible ("maxim,max8997-battery") to the mfd_cell to configure
the charger driver.
Signed-off-by: Timon Baetz <timon.baetz@protonmail.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|
If BT SoC is running with ROM FW then just return in
qca_suspend function as ROM FW does not support
in-band sleep.
Fixes: 2be43abac5a8 ("Bluetooth: hci_qca: Wait for timeout during suspend")
Signed-off-by: Venkata Lakshmi Narayana Gubba <gubbaven@codeaurora.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
Module builds of ioc3 fail with following errors:
ERROR: "spurious_interrupt" [drivers/mfd/ioc3.ko] undefined!
ERROR: "pci_find_host_bridge" [drivers/mfd/ioc3.ko] undefined!
Exporting pci_find_host_bridge got rejected by maintainer, so easiest
fix is to disable module building, which even makes sense since both
SGI Origin and Octane always contain at least one IOC3 chip.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|
A recent fix improved the way the resource gets passed to
the low-level accessors, but left one warning that appears
in configurations with a resource_size_t that is wider than
a pointer:
In file included from drivers/mfd/altera-sysmgr.c:19:
drivers/mfd/altera-sysmgr.c: In function 'sysmgr_probe':
drivers/mfd/altera-sysmgr.c:148:40: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast]
148 | regmap = devm_regmap_init(dev, NULL, (void *)res->start,
| ^
include/linux/regmap.h:646:6: note: in definition of macro '__regmap_lockdep_wrapper'
646 | fn(__VA_ARGS__, &_key, \
| ^~~~~~~~~~~
drivers/mfd/altera-sysmgr.c:148:12: note: in expansion of macro 'devm_regmap_init'
148 | regmap = devm_regmap_init(dev, NULL, (void *)res->start,
| ^~~~~~~~~~~~~~~~
I had tried a different approach that would store the address
in the private data as a phys_addr_t, but the easiest solution
now seems to be to add a double cast to shut up the warning.
As the address is passed to an inline assembly, it is guaranteed
to not be wider than a register anyway.
Fixes: d9ca7801b6e5 ("mfd: altera-sysmgr: Fix physical address storing hacks")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|
'ib-mfd-gpio-regulator-5.12' into ibs-for-mfd-merged
|
|
This issue starts from linux-5.10-rc1, I reproduced this issue on my
Dell Inspiron 7447 with BT adapter 0cf3:e005, the kernel will print
out: "Bluetooth: hci0: don't support firmware rome 0x31010000", and
someone else also reported the similar issue to bugzilla #211571.
I found this is a regression introduced by 'commit b40f58b97386
("Bluetooth: btusb: Add Qualcomm Bluetooth SoC WCN6855 support"), the
patch assumed that if high ROM version is not zero, it is an adapter
on WCN6855, but many old adapters don't need to load rampatch or nvm,
and they have non-zero high ROM version.
To fix it, let the driver match the rom_version in the
qca_devices_table first, if there is no entry matched, check the
high ROM version, if it is not zero, we assume this adapter is ready
to work and no need to load rampatch and nvm like previously.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=211571
Fixes: b40f58b97386 ("Bluetooth: btusb: Add Qualcomm Bluetooth SoC WCN6855 support")
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm
Pull ARM cpufreq changes for v5.12 from Viresh Kumar:
"- Removal of Tango driver as the platform got removed (Arnd Bergmann).
- Use resource managed APIs for tegra20 (Dmitry Osipenko).
- Generic cleanups for brcmstb (Christophe JAILLET).
- Enable boost support for qcom-hw (Shawn Guo)."
* 'cpufreq/arm/linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
cpufreq: remove tango driver
cpufreq: brcmstb-avs-cpufreq: Fix resource leaks in ->remove()
cpufreq: brcmstb-avs-cpufreq: Free resources in error path
cpufreq: qcom-hw: enable boost support
cpufreq: tegra20: Use resource-managed API
|
|
This reverts commit 32cf1a12cad43358e47dac8014379c2f33dfbed4.
The 'exisitng buffer' in this case is the firmware provided table, and
we should not modify that in place. This fixes a crash on arm64 with
initrd table overrides, in which case the DSDT is not mapped with
read/write permissions.
Reported-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Tested-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
