summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2018-03-29lightnvm: pblk: handle bad sectors in the emeta area correctlyHans Holmberg
Unless we check if there are bad sectors in the entire emeta-area we risk ending up with valid bitmap / available sector count inconsistency. This results in lines with a bad chunk at the last LUN marked as bad, so go through the whole emeta area and mark up the invalid sectors. Signed-off-by: Hans Holmberg <hans.holmberg@cnexlabs.com> Signed-off-by: Matias Bjørling <mb@lightnvm.io> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-03-29lightnvm: remove chnl_offset in nvme_nvm_identityMatias Bjørling
The identity structure is initialized to zero in the beginning of the nvme_nvm_identity function. The chnl_offset is separately set to zero. Since both the variable and assignment is never changed, remove them. Signed-off-by: Matias Bjørling <mb@lightnvm.io> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-03-29lightnvm/pblk-gc: Delete an error message for a failed memory allocation in ↵Markus Elfring
pblk_gc_line_prepare_ws() Omit an extra message for a memory allocation failure in this function. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Reviewed-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <mb@lightnvm.io> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-03-29iw_cxgb4: print mapped ports correctlyBharat Potnuri
c4iw_ep_common structure holds the mapped addresses, so while printing them, use appropriate pointers. Fixes: bab572f1d ("iw_cxgb4: Guard against null cm_id in dump_ep/qp") Signed-off-by: Potnuri Bharat Teja <bharat@chelsio.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-03-29dm mpath: fix support for loading scsi_dh modules during table loadMike Snitzer
The ability to have multipath dynamically attach a scsi_dh, that the user specified in the multipath table, was broken by commit e8f74a0f00 ("dm mpath: eliminate need to use scsi_device_from_queue"). Restore the ability to load, and attach, a particular scsi_dh module if one is specified (as noticed by checking m->hw_handler_name). Fixes: e8f74a0f00 ("dm mpath: eliminate need to use scsi_device_from_queue") Reported-by: Paul Mackerras <paulus@ozlabs.org> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2018-03-29Merge tag 'wireless-drivers-next-for-davem-2018-03-29' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== wireless-drivers-next patches for 4.17 Smaller new features to various drivers but nothing really out of ordinary. Major changes: ath10k * enable chip temperature measurement for QCA6174/QCA9377 * add firmware memory dump for QCA9984 * enable buffer STA on TDLS link for QCA6174 * support different beacon internals in multiple interface scenario for QCA988X/QCA99X0/QCA9984/QCA4019 iwlwifi * support for new PCI IDs for the 9000 family * support for a new firmware API version * support for advanced dwell and Optimized Connectivity Experience (OCE) in scanning btrsi * fix kconfig dependencies wil6210 * support multiple virtual interfaces ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-29Merge tag 'mac80211-next-for-davem-2018-03-29' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Johannes Berg says: ==================== We have a fair number of patches, but many of them are from the first bullet here: * EAPoL-over-nl80211 from Denis - this will let us fix some long-standing issues with bridging, races with encryption and more * DFS offload support from the qtnfmac folks * regulatory database changes for the new ETSI adaptivity requirements * various other fixes and small enhancements ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-29vhost: validate log when IOTLB is enabledJason Wang
Vq log_base is the userspace address of bitmap which has nothing to do with IOTLB. So it needs to be validated unconditionally otherwise we may try use 0 as log_base which may lead to pin pages that will lead unexpected result (e.g trigger BUG_ON() in set_bit_to_user()). Fixes: 6b1e6cc7855b0 ("vhost: new device IOTLB API") Reported-by: syzbot+6304bf97ef436580fede@syzkaller.appspotmail.com Signed-off-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-29RDMA/cma: Move rdma_cm_state to cma_priv.hParav Pandit
rdma_cm_state enum is internal to rdma_cm kernel module. It is not required to expose state enums to ULP modules. So lets keep its scope limited to rdma_cm module in cma_priv.h file. Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-03-29IB/addr: Constify dst_entry pointerParav Pandit
Make dst_entry pointer as const struct dst_entry* to improve code readablity to make sure that dst structure fields are not modified by various functions which are using it. Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-03-29RDMA: Use u64_to_user_ptr everywhereJason Gunthorpe
This is already used in many places, get the rest of them too, only to make the code a bit clearer & simpler. Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-03-29RDMA/nldev: Provide netdevice name and indexLeon Romanovsky
Export the net device name and index to easily find connection between IB devices and relevant net devices. We also updated the comment regarding the devices without FW. Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Reviewed-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-03-29IB/rxe: optimize mcast recv processZhu Yanjun
In mcast recv process, the function skb_clone is used. In fact, the refcount can be increased to replace cloning a new skb since the original skb will not be modified before it is freed. This can make the performance better and save the memory. CC: Srinivas Eeda <srinivas.eeda@oracle.com> CC: Junxiao Bi <junxiao.bi@oracle.com> Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com> Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-03-29qedr: Fix spelling mistake: "hanlde" -> "handle"Colin Ian King
Trivial fix to spelling mistake in DP_ERR message text Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Shamir Rabinovitch <shamir.rabinovitch@oracle.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-03-29oprofilefs: don't oops on allocation failureAl Viro
... just short-circuit the creation of potential children Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-03-29lustre: get rid of pointless casts to struct dentry *Al Viro
... when feeding const struct dentry * to primitives taking exactly that. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-03-29net: dsa: mv88e6xxx: Make VTU miss violations less spammyAndrew Lunn
VTU miss violations can happen under normal conditions. Don't spam the kernel log, downgrade the output to debug level only. The statistics counter will indicate it is happening, if anybody not debugging is interested. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reported-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-29net: dsa: mv88e6xxx: Keep ATU/VTU violation statisticsAndrew Lunn
Count the numbers of various ATU and VTU violation statistics and return them as part of the ethtool -S statistics. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-29net: cavium: use module_pci_driver to simplify the codeWei Yongjun
Use the module_pci_driver() macro to make the code simpler by eliminating module_init and module_exit calls. Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-29net: bcmgenet: return NULL instead of plain integerWei Yongjun
Fixes the following sparse warning: drivers/net/ethernet/broadcom/genet/bcmgenet.c:1351:16: warning: Using plain integer as NULL pointer Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-29qede: Do not drop rx-checksum invalidated packets.Manish Chopra
Today, driver drops received packets which are indicated as invalid checksum by the device. Instead of dropping such packets, pass them to the stack with CHECKSUM_NONE indication in skb. Signed-off-by: Ariel Elior <ariel.elior@cavium.com> Signed-off-by: Manish Chopra <manish.chopra@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-29sfp: allow cotsworks modulesRussell King
Cotsworks modules fail the checksums - it appears that Cotsworks reprograms the EEPROM at the end of production with the final product information (serial, date code, and exact part number for module options) and fails to update the checksum. Work around this by detecting the Cotsworks name in the manufacturer field, and reducing the checksum failures to warnings rather than a hard error. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-29qede: Ethtool flash update support.Sudarsana Reddy Kalluru
The patch adds ethtool callback implementation for flash update. Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: Ariel Elior <ariel.elior@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-29qed: Adapter flash update support.Sudarsana Reddy Kalluru
This patch adds the required driver support for updating the flash or non volatile memory of the adapter. At highlevel, flash upgrade comprises of reading the flash images from the input file, validating the images and writing them to the respective paritions. Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: Ariel Elior <ariel.elior@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-29qed: Add APIs for flash access.Sudarsana Reddy Kalluru
This patch adds APIs for flash access. Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: Ariel Elior <ariel.elior@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-29qed: Fix PTT entry leak in the selftest error flow.Sudarsana Reddy Kalluru
Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: Ariel Elior <ariel.elior@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-29qed: Populate nvm image attribute shadow.Sudarsana Reddy Kalluru
This patch adds support for populating the flash image attributes. Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: Ariel Elior <ariel.elior@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-29qed*: Utilize FW 8.33.11.0Michal Kalderon
This FW contains several fixes and features RDMA Features - SRQ support - XRC support - Memory window support - RDMA low latency queue support - RDMA bonding support RDMA bug fixes - RDMA remote invalidate during retransmit fix - iWARP MPA connect interop issue with RTR fix - iWARP Legacy DPM support - Fix MPA reject flow - iWARP error handling - RQ WQE validation checks MISC - Fix some HSI types endianity - New Restriction: vlan insertion in core_tx_bd_data can't be set for LB packets ETH - HW QoS offload support - Fix vlan, dcb and sriov flow of VF sending a packet with inband VLAN tag instead of default VLAN - Allow GRE version 1 offloads in RX flow - Allow VXLAN steering iSCSI / FcoE - Fix bd availability checking flow - Support 256th sge proerly in iscsi/fcoe retransmit - Performance improvement - Fix handle iSCSI command arrival with AHS and with immediate - Fix ipv6 traffic class configuration DEBUG - Update debug utilities Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by: Tomer Tayar <Tomer.Tayar@cavium.com> Signed-off-by: Manish Rangankar <Manish.Rangankar@cavium.com> Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com> Acked-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-29liquidio: Prioritize control messagesIntiyaz Basha
During heavy tx traffic, control messages (sent by liquidio driver to NIC firmware) sometimes do not get processed in a timely manner. Reason is: the low-level metadata of control messages and that of egress network packets indicate that they have the same priority. Fix it by setting a higher priority for control messages through the new ctrl_qpg field in the oct_txpciq struct. It is the NIC firmware that does the actual setting of priority by writing to the new ctrl_qpg field; the host driver treats that value as opaque and just assigns it to pki_ih3->qpg Signed-off-by: Intiyaz Basha <intiyaz.basha@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-29netdevsim: Add simple FIB resource controller via devlinkDavid Ahern
Add devlink support to netdevsim and use it to implement a simple, profile based resource controller. Only one controller is needed per namespace, so the first netdevsim netdevice in a namespace registers with devlink. If that device is deleted, the resource settings are deleted. The resource controller allows a user to limit the number of IPv4 and IPv6 FIB entries and FIB rules. The resource paths are: /IPv4 /IPv4/fib /IPv4/fib-rules /IPv6 /IPv6/fib /IPv6/fib-rules The IPv4 and IPv6 top level resources are unlimited in size and can not be changed. From there, the number of FIB entries and FIB rule entries are unlimited by default. A user can specify a limit for the fib and fib-rules resources: $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib size 96 $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib-rules size 16 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib size 64 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib-rules size 16 $ devlink dev reload netdevsim/netdevsim0 such that the number of rules or routes is limited (96 ipv4 routes in the example above): $ for n in $(seq 1 32); do ip ro add 10.99.$n.0/24 dev eth1; done Error: netdevsim: Exceeded number of supported fib entries. $ devlink resource show netdevsim/netdevsim0 netdevsim/netdevsim0: name IPv4 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables non resources: name fib size 96 occ 96 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables ... With this template in place for resource management, it is fairly trivial to extend and shows one way to implement a simple counter based resource controller typical of network profiles. Currently, devlink only supports initial namespace. Code is in place to adapt netdevsim to a per namespace controller once the network namespace issues are resolved. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-29Merge tag 'mlx5-updates-2018-03-27' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== mlx5-updates-2018-03-27 (Misc updates & SQ recovery) This series contains Misc updates and cleanups for mlx5e rx path and SQ recovery feature for tx path. From Tariq: (RX updates) - Disable Striding RQ when PCI devices, striding RQ limits the use of CQE compression feature, which is very critical for slow PCI devices performance, in this change we will prefer CQE compression over Striding RQ only on specific "slow" PCIe links. - RX path cleanups - Private flag to enable/disable striding RQ From Eran: (TX fast recovery) - TX timeout logic improvements, fast SQ recovery and TX error reporting if a HW error occurs while transmitting on a specific SQ, the driver will ignore such error and will wait for TX timeout to occur and reset all the rings. Instead, the current series improves the resiliency for such HW errors by detecting TX completions with errors, which will report them and perform a fast recover for the specific faulty SQ even before a TX timeout is detected. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-29net: Introduce net_rwsem to protect net_namespace_listKirill Tkhai
rtnl_lock() is used everywhere, and contention is very high. When someone wants to iterate over alive net namespaces, he/she has no a possibility to do that without exclusive lock. But the exclusive rtnl_lock() in such places is overkill, and it just increases the contention. Yes, there is already for_each_net_rcu() in kernel, but it requires rcu_read_lock(), and this can't be sleepable. Also, sometimes it may be need really prevent net_namespace_list growth, so for_each_net_rcu() is not fit there. This patch introduces new rw_semaphore, which will be used instead of rtnl_mutex to protect net_namespace_list. It is sleepable and allows not-exclusive iterations over net namespaces list. It allows to stop using rtnl_lock() in several places (what is made in next patches) and makes less the time, we keep rtnl_mutex. Here we just add new lock, while the explanation of we can remove rtnl_lock() there are in next patches. Fine grained locks generally are better, then one big lock, so let's do that with net_namespace_list, while the situation allows that. Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-29mtd: nand: Fix some function description mismatches in core.cXiaolei Li
In core.c, some function descriptions do not match function definitions. Just fix these mismatches. Signed-off-by: Xiaolei Li <xiaolei.li@mediatek.com> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-03-29mtd: jedec_probe: Fix crash in jedec_read_mfr()Linus Walleij
It turns out that the loop where we read manufacturer jedec_read_mfd() can under some circumstances get a CFI_MFR_CONTINUATION repeatedly, making the loop go over all banks and eventually hit the end of the map and crash because of an access violation: Unable to handle kernel paging request at virtual address c4980000 pgd = (ptrval) [c4980000] *pgd=03808811, *pte=00000000, *ppte=00000000 Internal error: Oops: 7 [#1] PREEMPT ARM CPU: 0 PID: 1 Comm: swapper Not tainted 4.16.0-rc1+ #150 Hardware name: Gemini (Device Tree) PC is at jedec_probe_chip+0x6ec/0xcd0 LR is at 0x4 pc : [<c03a2bf4>] lr : [<00000004>] psr: 60000013 sp : c382dd18 ip : 0000ffff fp : 00000000 r10: c0626388 r9 : 00020000 r8 : c0626340 r7 : 00000000 r6 : 00000001 r5 : c3a71afc r4 : c382dd70 r3 : 00000001 r2 : c4900000 r1 : 00000002 r0 : 00080000 Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none Control: 0000397f Table: 00004000 DAC: 00000053 Process swapper (pid: 1, stack limit = 0x(ptrval)) Fix this by breaking the loop with a return 0 if the offset exceeds the map size. Fixes: 5c9c11e1c47c ("[MTD] [NOR] Add support for flash chips with ID in bank other than 0") Cc: <stable@vger.kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-03-29mtd: nand: atmel: Fix get_sectorsize() functionBoris Brezillon
get_sectorsize() was not using the appropriate macro to extract the ECC sector size from the config cache, which led to buggy ECC when using 1024 byte sectors. Fixes: f88fc122cc34 ("mtd: nand: Cleanup/rework the atmel_nand driver") Cc: <stable@vger.kernel.org> Reported-by: Olivier Schonken <olivier.schonken@gmail.com> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Reviewed-by: Richard Weinberger <richard@nod.at> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Tested-by: Olivier Schonken <olivier.schonken@gmail.com>
2018-03-29Revert "USB: serial: ftdi_sio: add Id for Physik Instrumente E-870"Johan Hovold
This reverts commit 79a0b33165d8d8ec0840fcfc74fd0a8f219abeee. Turns out this is not an FTDI device after all. Fixes: 79a0b33165d8 ("USB: serial: ftdi_sio: add Id for Physik Instrumente E-870") Reported-by: Martin Teichmann <martin.teichmann@xfel.eu> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-29usb: musb: gadget: misplaced out of bounds checkHeinrich Schuchardt
musb->endpoints[] has array size MUSB_C_NUM_EPS. We must check array bounds before accessing the array and not afterwards. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Bin Liu <b-liu@ti.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-29net: bgmac: Mask interrupts during probeFlorian Fainelli
We can have interrupts left enabled form e.g: the bootloader which used the network device for network boot. Make sure we have those disabled as early as possible to avoid spurious interrupts. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-29net: bgmac: Use interface name to request interruptFlorian Fainelli
When the system contains several BGMAC adapters, it is nice to be able to tell which one is which by looking at /proc/interrupts. Use the network device name as a name to request_irq() with. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-29net: ethernet: nixge: Add support for National Instruments XGE netdevMoritz Fischer
Add support for the National Instruments XGE 1/10G network device. It uses the EEPROM on the board via NVMEM. Signed-off-by: Moritz Fischer <mdf@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-29hv_netvsc: enable multicast if necessaryStephen Hemminger
My recent change to netvsc drive in how receive flags are handled broke multicast. The Hyper-v/Azure virtual interface there is not a multicast filter list, filtering is only all or none. The driver must enable all multicast if any multicast address is present. Fixes: 009f766ca238 ("hv_netvsc: filter multicast/broadcast") Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-29lan78xx: Crash in lan78xx_writ_reg (Workqueue: events ↵Raghuram Chary J
lan78xx_deferred_multicast_write) Description: Crash was reported with syzkaller pointing to lan78xx_write_reg routine. Root-cause: Proper cleanup of workqueues and init/setup routines was not happening in failure conditions. Fix: Handled the error conditions by cleaning up the queues and init/setup routines. Fixes: 55d7de9de6c3 ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet device driver") Reported-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Raghuram Chary J <raghuramchary.jallipalli@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-29ieee802154: ca8210: fix uninitialised data readHarry Morris
In ca8210_test_int_user_write() a user can request the transfer of a frame with a length field (command.length) that is longer than the actual buffer provided (len). In this scenario the driver will copy the buffer contents into the uninitialised command[] buffer, then transfer <data.length> bytes over the SPI even though only <len> bytes had been populated, potentially leaking sensitive kernel memory. Also the first 6 bytes of the command buffer must be initialised in case a malformed, short packet is written and the uninitialised bytes are read in ca8210_test_check_upstream. Reported-by: Domen Puncer Kugler <domen.puncer@samsung.com> Signed-off-by: Harry Morris <h.morris@cascoda.com> Tested-by: Harry Morris <h.morris@cascoda.com> Signed-off-by: Stefan Schmidt <stefan@osg.samsung.com>
2018-03-29perf/x86/pt, coresight: Clean up address filter structureAlexander Shishkin
This is a cosmetic patch that deals with the address filter structure's ambiguous fields 'filter' and 'range'. The former stands to mean that the filter's *action* should be to filter the traces to its address range if it's set or stop tracing if it's unset. This is confusing and hard on the eyes, so this patch replaces it with 'action' enum. The 'range' field is completely redundant (meaning that the filter is an address range as opposed to a single address trigger), as we can use zero size to mean the same thing. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Acked-by: Mathieu Poirier <mathieu.poirier@linaro.org> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: Will Deacon <will.deacon@arm.com> Link: http://lkml.kernel.org/r/20180329120648.11902-1-alexander.shishkin@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-29Merge branch 'perf/urgent' into perf/coreIngo Molnar
Conflicts: kernel/events/hw_breakpoint.c Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-29ahci: imx: add the imx8qm ahci sata supportRichard Zhu
- There are three PHY lanes on iMX8QM, and can be used in the following three cases 1. a two lanes PCIE_A, and a single lane SATA. 2. a single lane PCIE_A, a single lane PCIE_B and a single lane SATA. 3. a two lanes PCIE_A, and a single lane PCIE_B. The configuration of the iMX8QM AHCI SATA is relied on the usage of PCIE ports in the case 1 and 2. Use standalone iMX8 AHCI SATA probe and enable functions to enable iMX8QM AHCI SATA support. - To save power consumption, PHY CLKs can be gated off after the configurations are done. - The impedance ratio should be configured refer to differnet REXT values. 0x6c <--> REXT value is 85Ohms 0x80 (default value) <--> REXT value is 100Ohms. In general, REXT value should be 85ohms in standalone PCIE HW board design, and 100ohms in SATA standalone HW board design. When the PCIE and the SATA are enabled simultaneously in the HW board design. The REXT value would be set to 85ohms. Configure the SATA PHY impedance ratio to 0x6c in default. Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2018-03-29Merge branches 'x86/amd', 'x86/vt-d', 'arm/rockchip', 'arm/omap', ↵Joerg Roedel
'arm/mediatek', 'arm/exynos', 'arm/renesas', 'arm/smmu' and 'core' into next
2018-03-29iommu/io-pgtable-arm: Avoid warning with 32-bit phys_addr_tRobin Murphy
It's not entirely unreasonable for io-pgtable-arm to be built for configurations with 32-bit phys_addr_t, where the compiler rightly raises a warning about the 36-bit shift. That particular code path should never actually *run* on those systems, but we still want it to compile cleanly, which is easily done by using an unambiguous u64 as the intermediate type instead. Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2018-03-29Merge ath-next from git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.gitKalle Valo
ath.git patches for 4.17. Major changes: ath10k * enable chip temperature measurement for QCA6174/QCA9377 * add firmware memory dump for QCA9984 * enable buffer STA on TDLS link for QCA6174 * support different beacon internals in multiple interface scenario for QCA988X/QCA99X0/QCA9984/QCA4019
2018-03-29Merge tag 'stm-intel_th-for-greg-20180329' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/ash/stm into char-misc-next Alexander writes: stm class/intel_th: Updates for 4.17 These are: * Mass conversion to GPL-2 SPDX header * Moved "hwtracing" to now its own submenu, to uncrowd the parent menu a bit * Added MAINTAINERS entry for drivers/hwtracing * Somewhat small Trace Hub fixes * Added ACPI glue layer for the Trace Hub * Added more module parameters to dummy_stm for better test coverage
generated by cgit (git 2.34.1) at 2025-09-19 11:46:44 +0000