summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2022-03-29rtc: gamecube: Fix refcount leak in gamecube_rtc_read_offset_from_sramMiaoqian Lin
The of_find_compatible_node() function returns a node pointer with refcount incremented, We should use of_node_put() on it when done Add the missing of_node_put() to release the refcount. Fixes: 86559400b3ef ("rtc: gamecube: Add a RTC driver for the GameCube, Wii and Wii U") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20220309092225.6930-1-linmq006@gmail.com
2022-03-29rtc: mc146818-lib: Fix the AltCentury for AMD platformsMario Limonciello
Setting the century forward has been failing on AMD platforms. There was a previous attempt at fixing this for family 0x17 as part of commit 7ad295d5196a ("rtc: Fix the AltCentury value on AMD/Hygon platform") but this was later reverted due to some problems reported that appeared to stem from an FW bug on a family 0x17 desktop system. The same comments mentioned in the previous commit continue to apply to the newer platforms as well. ``` MC146818 driver use function mc146818_set_time() to set register RTC_FREQ_SELECT(RTC_REG_A)'s bit4-bit6 field which means divider stage reset value on Intel platform to 0x7. While AMD/Hygon RTC_REG_A(0Ah)'s bit4 is defined as DV0 [Reference]: DV0 = 0 selects Bank 0, DV0 = 1 selects Bank 1. Bit5-bit6 is defined as reserved. DV0 is set to 1, it will select Bank 1, which will disable AltCentury register(0x32) access. As UEFI pass acpi_gbl_FADT.century 0x32 (AltCentury), the CMOS write will be failed on code: CMOS_WRITE(century, acpi_gbl_FADT.century). Correct RTC_REG_A bank select bit(DV0) to 0 on AMD/Hygon CPUs, it will enable AltCentury(0x32) register writing and finally setup century as expected. ``` However in closer examination the change previously submitted was also modifying bits 5 & 6 which are declared reserved in the AMD documentation. So instead modify just the DV0 bank selection bit. Being cognizant that there was a failure reported before, split the code change out to a static function that can also be used for exclusions if any regressions such as Mikhail's pop up again. Cc: Jinke Fan <fanjinke@hygon.cn> Cc: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com> Link: https://lore.kernel.org/all/CABXGCsMLob0DC25JS8wwAYydnDoHBSoMh2_YLPfqm3TTvDE-Zw@mail.gmail.com/ Link: https://www.amd.com/system/files/TechDocs/51192_Bolton_FCH_RRG.pdf Signed-off-by: Raul E Rangel <rrangel@chromium.org> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20220111225750.1699-1-mario.limonciello@amd.com
2022-03-29parisc: Fix CPU affinity for Lasi, WAX and Dino chipsHelge Deller
Add the missing logic to allow Lasi, WAX and Dino to set the CPU affinity. This fixes IRQ migration to other CPUs when a CPU is shutdown which currently holds the IRQs for one of those chips. Signed-off-by: Helge Deller <deller@gmx.de>
2022-03-29Merge tag 'devprop-5.18-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull device properties code update from Rafael Wysocki: "This is based on new i2c material for 5.18-rc1 and simply reorganizes the code on top of it so as to group similar functions together (Andy Shevchenko)" * tag 'devprop-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: device property: Don't split fwnode_get_irq*() APIs in the code
2022-03-29Merge tag 'pm-5.18-rc1-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull more power management updates from Rafael Wysocki: "These update ARM cpufreq drivers, the OPP (Operating Performance Points) library and the power management documentation. Specifics: - Add per core DVFS support for QCom SoC (Bjorn Andersson), convert to yaml binding (Manivannan Sadhasivam) and various other fixes to the QCom drivers (Luca Weiss). - Add OPP table for imx7s SoC (Denys Drozdov) and minor fixes (Stefan Agner). - Fix CPPC driver's freq/performance conversions (Pierre Gondois). - Minor generic cleanups (Yury Norov). - Introduce opp-microwatt property to the OPP core, bindings, etc (Lukasz Luba). - Convert DT bindings to schema format and various related fixes (Yassine Oudjana). - Expose OPP's OF node in debugfs (Viresh Kumar). - Add Intel uncore frequency scaling documentation file to its MAINTAINERS entry (Srinivas Pandruvada). - Clean up the AMD P-state driver documentation (Jan Engelhardt)" * tag 'pm-5.18-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (24 commits) Documentation: amd-pstate: grammar and sentence structure updates dt-bindings: cpufreq: cpufreq-qcom-hw: Convert to YAML bindings dt-bindings: dvfs: Use MediaTek CPUFREQ HW as an example Documentation: EM: Describe new registration method using DT OPP: Add support of "opp-microwatt" for EM registration PM: EM: add macro to set .active_power() callback conditionally OPP: Add "opp-microwatt" supporting code dt-bindings: opp: Add "opp-microwatt" entry in the OPP MAINTAINERS: Add additional file to uncore frequency control cpufreq: blocklist Qualcomm sc8280xp and sa8540p in cpufreq-dt-platdev cpufreq: qcom-hw: Add support for per-core-dcvs dt-bindings: power: avs: qcom,cpr: Convert to DT schema arm64: dts: qcom: qcs404: Rename CPU and CPR OPP tables arm64: dts: qcom: msm8996: Rename cluster OPP tables dt-bindings: opp: Convert qcom-nvmem-cpufreq to DT schema dt-bindings: opp: qcom-opp: Convert to DT schema arm64: dts: qcom: msm8996-mtp: Add msm8996 compatible dt-bindings: arm: qcom: Add msm8996 and apq8096 compatibles opp: Expose of-node's name in debugfs cpufreq: CPPC: Fix performance/frequency conversion ...
2022-03-29Merge branches 'clk-sifive' and 'clk-visconti' into clk-nextStephen Boyd
* clk-sifive: clk: sifive: Move all stuff into SoCs header files from C files clk: sifive: Add SoCs prefix in each SoCs-dependent data riscv: dts: Change the macro name of prci in each device node dt-bindings: change the macro name of prci in header files and example clk: sifive: duplicate the macro definitions for the time being * clk-visconti: clk: visconti: prevent array overflow in visconti_clk_register_gates()
2022-03-29Merge branches 'clk-range', 'clk-uniphier', 'clk-apple' and 'clk-qcom' into ↵Stephen Boyd
clk-next - Make clk_set_rate_range() re-evaluate the limits each time - Introduce various clk_set_rate_range() tests - Add clk_drop_range() to drop a previously set range - Support for NCO blocks on Apple SoCs * clk-range: clk: Drop the rate range on clk_put() clk: test: Test clk_set_rate_range on orphan mux clk: Initialize orphan req_rate clk: bcm: rpi: Run some clocks at the minimum rate allowed clk: bcm: rpi: Set a default minimum rate clk: bcm: rpi: Add variant structure clk: Add clk_drop_range clk: Always set the rate on clk_set_range_rate clk: Use clamp instead of open-coding our own clk: Always clamp the rounded rate clk: Enforce that disjoints limits are invalid clk: Introduce Kunit Tests for the framework clk: Fix clk_hw_get_clk() when dev is NULL * clk-uniphier: clk: uniphier: Fix fixed-rate initialization * clk-apple: clk: clk-apple-nco: Allow and fix module building MAINTAINERS: Add clk-apple-nco under ARM/APPLE MACHINE clk: clk-apple-nco: Add driver for Apple NCO dt-bindings: clock: Add Apple NCO * clk-qcom: (61 commits) clk: qcom: gcc-msm8994: Fix gpll4 width dt-bindings: clock: fix dt_binding_check error for qcom,gcc-other.yaml clk: qcom: Add display clock controller driver for SM6125 dt-bindings: clock: add QCOM SM6125 display clock bindings clk: qcom: Fix sorting of SDX_GCC_65 in Makefile and Kconfig clk: qcom: gcc: Add emac GDSC support for SM8150 clk: qcom: gcc: sm8150: Fix some identation issues clk: qcom: gcc: Add UFS_CARD and UFS_PHY GDSCs for SM8150 clk: qcom: gcc: Add PCIe0 and PCIe1 GDSC for SM8150 clk: qcom: clk-rcg2: Update the frac table for pixel clock clk: qcom: clk-rcg2: Update logic to calculate D value for RCG clk: qcom: smd: Add missing MSM8998 RPM clocks clk: qcom: smd: Add missing RPM clocks for msm8992/4 dt-bindings: clock: qcom: rpmcc: Add RPM Modem SubSystem (MSS) clocks clk: qcom: gcc-ipq806x: add CryptoEngine resets dt-bindings: reset: add ipq8064 ce5 resets clk: qcom: gcc-ipq806x: add CryptoEngine clocks dt-bindings: clock: add ipq8064 ce5 clk define clk: qcom: gcc-ipq806x: add additional freq for sdc table clk: qcom: clk-rcg: add clk_rcg_floor_ops ops ...
2022-03-29Merge branches 'clk-starfive', 'clk-ti', 'clk-terminate' and 'clk-cleanup' ↵Stephen Boyd
into clk-next - Audio clks on StarFive JH7100 RISC-V SoC - Terminate arrays with sentinels and make that clearer - Cleanup SPDX tags - Fix typos in comments * clk-starfive: clk: starfive: Add JH7100 audio clock driver clk: starfive: jh7100: Support more clock types clk: starfive: jh7100: Make hw clock implementation reusable dt-bindings: clock: Add starfive,jh7100-audclk bindings dt-bindings: clock: Add JH7100 audio clock definitions clk: starfive: jh7100: Handle audio_div clock properly clk: starfive: jh7100: Don't round divisor up twice * clk-ti: clk: ti: Drop legacy compatibility clocks for dra7 clk: ti: Drop legacy compatibility clocks for am4 clk: ti: Drop legacy compatibility clocks for am3 clk: ti: Update component clocks to use ti_dt_clk_name() clk: ti: Update pll and clockdomain clocks to use ti_dt_clk_name() clk: ti: Add ti_dt_clk_name() helper to use clock-output-names clk: ti: Use clock-output-names for clkctrl clk: ti: Add ti_find_clock_provider() to use clock-output-names clk: ti: Optionally parse IO address from parent clock node clk: ti: Preserve node in ti_dt_clocks_register() clk: ti: Constify clkctrl_name * clk-terminate: clk: actions: Make sentinel elements more obvious clk: clps711x: Terminate clk_div_table with sentinel element clk: hisilicon: Terminate clk_div_table with sentinel element clk: loongson1: Terminate clk_div_table with sentinel element clk: actions: Terminate clk_div_table with sentinel element * clk-cleanup: clk: zynq: Update the parameters to zynq_clk_register_periph_clk clk: zynq: trivial warning fix clk: qcom: sm6125-gcc: fix typos in comments clk: ti: clkctrl: fix typos in comments clk: COMMON_CLK_LAN966X should depend on SOC_LAN966 clk: Use of_device_get_match_data() clk: bcm2835: Remove unused variable clk: tegra: tegra124-emc: Fix missing put_device() call in emc_ensure_emc_driver clk: cleanup comments clk: socfpga: cleanup spdx tags
2022-03-29Merge branches 'clk-mvebu', 'clk-const', 'clk-imx' and 'clk-rockchip' into ↵Stephen Boyd
clk-next - Mark mux table as const in clk-mux - Make the all_lists array const * clk-mvebu: clk: mvebu: use time_is_before_eq_jiffies() instead of open coding it * clk-const: clk: Mark clk_core_evict_parent_cache_subtree() 'target' const clk: Mark 'all_lists' as const clk: pistachio: Declare mux table as const u32[] clk: qcom: Declare mux table as const u32[] clk: mmp: Declare mux tables as const u32[] clk: hisilicon: Remove unnecessary cast of mux table to u32 * clk: mux: Declare u32 *table parameter as const clk: nxp: Declare mux table parameter as const u32 * clk: nxp: Remove unused variable * clk-imx: (28 commits) dt-bindings: clock: drop useless consumer example clk: imx: Select MXC_CLK for i.MX93 clock driver clk: imx: remove redundant re-assignment of pll->base MAINTAINERS: clk: imx: add git tree and dt-bindings files clk: imx: pll14xx: Support dynamic rates clk: imx: pll14xx: Add pr_fmt clk: imx: pll14xx: explicitly return lowest rate clk: imx: pll14xx: name variables after usage clk: imx: pll14xx: consolidate rate calculation clk: imx: pll14xx: Use FIELD_GET/FIELD_PREP clk: imx: pll14xx: Drop wrong shifting clk: imx: pll14xx: Use register defines consistently clk: imx8mp: remove SYS PLL 1/2 clock gates clk: imx8mn: remove SYS PLL 1/2 clock gates clk: imx8mm: remove SYS PLL 1/2 clock gates clk: imx: add i.MX93 clk clk: imx: support fracn gppll clk: imx: add i.MX93 composite clk dt-bindings: clock: add i.MX93 clock definition dt-bindings: clock: Add imx93 clock support ... * clk-rockchip: clk: rockchip: re-add rational best approximation algorithm to the fractional divider clk/rockchip: Use of_device_get_match_data() clk: rockchip: Add CLK_SET_RATE_PARENT to the HDMI reference clock on rk3568 clk: rockchip: drop CLK_SET_RATE_PARENT from dclk_vop* on rk3568 clk: rockchip: Add more PLL rates for rk3568
2022-03-29Merge branches 'clk-xilinx', 'clk-kunit', 'clk-cs2000' and 'clk-renesas' ↵Stephen Boyd
into clk-next - Kunit tests for clk-gate implementation - Convert Cirrus Logic CS2000P driver to regmap, yamlify DT binding and add support for dynamic mode * clk-xilinx: clk: zynqmp: replace warn_once with pr_debug for failed clock ops * clk-kunit: clk: gate: Add some kunit test suites * clk-cs2000: clk: cs2000-cp: convert driver to regmap clk: cs2000-cp: freeze config during register fiddling clk: cs2000-cp: make clock skip setting configurable clk: cs2000-cp: add support for dynamic mode clk: cs2000-cp: Make aux output function controllable dt-bindings: clock: cs2000-cp: document cirrus,dynamic-mode dt-bindings: clock: cs2000-cp: document cirrus,clock-skip flag dt-bindings: clock: cs2000-cp: document aux-output-source dt-bindings: clock: convert cs2000-cp bindings to yaml * clk-renesas: dt-bindings: clock: renesas: Make example 'clocks' parsable clk: rs9: Add Renesas 9-series PCIe clock generator driver clk: fixed-factor: Introduce devm_clk_hw_register_fixed_factor_index() dt-bindings: clk: rs9: Add Renesas 9-series I2C PCIe clock generator clk: renesas: r8a779f0: Add PFC clock clk: renesas: r8a779f0: Add I2C clocks clk: renesas: r8a779f0: Add WDT clock clk: renesas: r8a779f0: Fix RSW2 clock divider clk: renesas: rzg2l-cpg: Add support for RZ/V2L SoC dt-bindings: clock: renesas: Document RZ/V2L SoC dt-bindings: clock: Add R9A07G054 CPG Clock and Reset Definitions clk: renesas: r8a779a0: Add CANFD module clock clk: renesas: r9a07g044: Update multiplier and divider values for PLL2/3 clk: renesas: r8a7799[05]: Add MLP clocks clk: renesas: r8a779f0: Add SYS-DMAC clocks
2022-03-29Merge branches 'clk-microchip', 'clk-si', 'clk-mtk', 'clk-at91' and 'clk-st' ↵Stephen Boyd
into clk-next - Clock configuration on Microchip PolarFire SoCs - Free allocations on probe error in Mediatek clk driver - Modernize Mediatek clk driver by consolidating code * clk-microchip: clk: microchip: Add driver for Microchip PolarFire SoC dt-bindings: clk: microchip: Add Microchip PolarFire host binding * clk-si: clk-si5341: replace snprintf in show functions with sysfs_emit clk: si5341: fix reported clk_rate when output divider is 2 * clk-mtk: (32 commits) clk: mediatek: Warn if clk IDs are duplicated clk: mediatek: mt8195: Implement remove functions clk: mediatek: mt8195: Implement error handling in probe functions clk: mediatek: mt8195: Hook up mtk_clk_simple_remove() clk: mediatek: Unregister clks in mtk_clk_simple_probe() error path clk: mediatek: mtk: Implement error handling in register APIs clk: mediatek: pll: Implement error handling in register API clk: mediatek: mux: Implement error handling in register API clk: mediatek: mux: Reverse check for existing clk to reduce nesting level clk: mediatek: gate: Implement error handling in register API clk: mediatek: cpumux: Implement error handling in register API clk: mediatek: mtk: Clean up included headers clk: mediatek: Add mtk_clk_simple_remove() clk: mediatek: Implement mtk_clk_unregister_composites() API clk: mediatek: Implement mtk_clk_unregister_divider_clks() API clk: mediatek: Implement mtk_clk_unregister_factors() API clk: mediatek: Implement mtk_clk_unregister_fixed_clks() API clk: mediatek: pll: Clean up included headers clk: mediatek: pll: Implement unregister API clk: mediatek: pll: Split definitions into separate header file ... * clk-at91: clk: at91: clk-master: remove dead code clk: at91: sama7g5: fix parents of PDMCs' GCLK clk: at91: sama7g5: Allow MCK1 to be exported and referenced in DT clk: at91: allow setting PMC_AUDIOPINCK clock parents via DT * clk-st: clk: stm32mp1: Add parent_data to ETHRX clock clk: stm32mp1: Split ETHCK_K into separate MUX and GATE clock
2022-03-29clk: zynq: Update the parameters to zynq_clk_register_periph_clkShubhrajyoti Datta
In case there are only one gate or the two_gate is 0 the clk1 clock passed is not used. We are passing 0 which is arm_pll. Pass a invalid clock instead. Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com> Link: https://lore.kernel.org/r/20220222130903.17235-3-shubhrajyoti.datta@xilinx.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-03-29clk: zynq: trivial warning fixShubhrajyoti Datta
Fix the below warning WARNING: Missing a blank line after declarations + int enable = !!(fclk_enable & BIT(i - fclk0)); + zynq_clk_register_fclk(i, clk_output_name[i], Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com> Link: https://lore.kernel.org/r/20220222130903.17235-2-shubhrajyoti.datta@xilinx.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-03-29Merge branch 'pm-opp'Rafael J. Wysocki
Merge OPP (Operating Performance Points) changes for 5.18-rc1. * pm-opp: Documentation: EM: Describe new registration method using DT OPP: Add support of "opp-microwatt" for EM registration PM: EM: add macro to set .active_power() callback conditionally OPP: Add "opp-microwatt" supporting code dt-bindings: opp: Add "opp-microwatt" entry in the OPP dt-bindings: power: avs: qcom,cpr: Convert to DT schema arm64: dts: qcom: qcs404: Rename CPU and CPR OPP tables arm64: dts: qcom: msm8996: Rename cluster OPP tables dt-bindings: opp: Convert qcom-nvmem-cpufreq to DT schema dt-bindings: opp: qcom-opp: Convert to DT schema arm64: dts: qcom: msm8996-mtp: Add msm8996 compatible dt-bindings: arm: qcom: Add msm8996 and apq8096 compatibles opp: Expose of-node's name in debugfs
2022-03-29Merge tag 'dma-mapping-5.18' of git://git.infradead.org/users/hch/dma-mappingLinus Torvalds
Pull dma-mapping updates from Christoph Hellwig: - do not zero buffer in set_memory_decrypted (Kirill A. Shutemov) - fix return value of dma-debug __setup handlers (Randy Dunlap) - swiotlb cleanups (Robin Murphy) - remove most remaining users of the pci-dma-compat.h API (Christophe JAILLET) - share the ABI header for the DMA map_benchmark with userspace (Tian Tao) - update the maintainer for DMA MAPPING BENCHMARK (Xiang Chen) - remove CONFIG_DMA_REMAP (me) * tag 'dma-mapping-5.18' of git://git.infradead.org/users/hch/dma-mapping: dma-mapping: benchmark: extract a common header file for map_benchmark definition dma-debug: fix return value of __setup handlers dma-mapping: remove CONFIG_DMA_REMAP media: v4l2-pci-skeleton: Remove usage of the deprecated "pci-dma-compat.h" API rapidio/tsi721: Remove usage of the deprecated "pci-dma-compat.h" API sparc: Remove usage of the deprecated "pci-dma-compat.h" API agp/intel: Remove usage of the deprecated "pci-dma-compat.h" API alpha: Remove usage of the deprecated "pci-dma-compat.h" API MAINTAINERS: update maintainer list of DMA MAPPING BENCHMARK swiotlb: simplify array allocation swiotlb: tidy up includes swiotlb: simplify debugfs setup swiotlb: do not zero buffer in set_memory_decrypted()
2022-03-29phy: PHY_FSL_LYNX_28G should depend on ARCH_LAYERSCAPEGeert Uytterhoeven
Freescale Layerscape Lynx 28G SerDes PHYs are only present on Freescale/NXP Layerscape SoCs. Move PHY_FSL_LYNX_28G outside the block for ARCH_MXC, as the latter is meant for i.MX8 SoCs, which is a different family than Layerscape. Add a dependency on ARCH_LAYERSCAPE, to prevent asking the user about this driver when configuring a kernel without Layerscape SoC support. Fixes: 02e2af20f4f9f2aa ("Merge tag 'char-misc-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc") Fixes: 8f73b37cf3fbda67 ("phy: add support for the Layerscape SerDes 28G") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-29Drivers: hv: vmbus: Prevent load re-ordering when reading ring bufferMichael Kelley
When reading a packet from a host-to-guest ring buffer, there is no memory barrier between reading the write index (to see if there is a packet to read) and reading the contents of the packet. The Hyper-V host uses store-release when updating the write index to ensure that writes of the packet data are completed first. On the guest side, the processor can reorder and read the packet data before the write index, and sometimes get stale packet data. Getting such stale packet data has been observed in a reproducible case in a VM on ARM64. Fix this by using virt_load_acquire() to read the write index, ensuring that reads of the packet data cannot be reordered before it. Preventing such reordering is logically correct, and with this change, getting stale data can no longer be reproduced. Signed-off-by: Michael Kelley <mikelley@microsoft.com> Reviewed-by: Andrea Parri (Microsoft) <parri.andrea@gmail.com> Link: https://lore.kernel.org/r/1648394710-33480-1-git-send-email-mikelley@microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org>
2022-03-29PCI: hv: Propagate coherence from VMbus device to PCI deviceMichael Kelley
PCI pass-thru devices in a Hyper-V VM are represented as a VMBus device and as a PCI device. The coherence of the VMbus device is set based on the VMbus node in ACPI, but the PCI device has no ACPI node and defaults to not hardware coherent. This results in extra software coherence management overhead on ARM64 when devices are hardware coherent. Fix this by setting up the PCI host bus so that normal PCI mechanisms will propagate the coherence of the VMbus device to the PCI device. There's no effect on x86/x64 where devices are always hardware coherent. Signed-off-by: Michael Kelley <mikelley@microsoft.com> Acked-by: Boqun Feng <boqun.feng@gmail.com> Acked-by: Robin Murphy <robin.murphy@arm.com> Link: https://lore.kernel.org/r/1648138492-2191-3-git-send-email-mikelley@microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org>
2022-03-29Drivers: hv: vmbus: Propagate VMbus coherence to each VMbus deviceMichael Kelley
VMbus synthetic devices are not represented in the ACPI DSDT -- only the top level VMbus device is represented. As a result, on ARM64 coherence information in the _CCA method is not specified for synthetic devices, so they default to not hardware coherent. Drivers for some of these synthetic devices have been recently updated to use the standard DMA APIs, and they are incurring extra overhead of unneeded software coherence management. Fix this by propagating coherence information from the VMbus node in ACPI to the individual synthetic devices. There's no effect on x86/x64 where devices are always hardware coherent. Signed-off-by: Michael Kelley <mikelley@microsoft.com> Acked-by: Robin Murphy <robin.murphy@arm.com> Link: https://lore.kernel.org/r/1648138492-2191-2-git-send-email-mikelley@microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org>
2022-03-29Drivers: hv: vmbus: Fix potential crash on module unloadGuilherme G. Piccoli
The vmbus driver relies on the panic notifier infrastructure to perform some operations when a panic event is detected. Since vmbus can be built as module, it is required that the driver handles both registering and unregistering such panic notifier callback. After commit 74347a99e73a ("x86/Hyper-V: Unload vmbus channel in hv panic callback") though, the panic notifier registration is done unconditionally in the module initialization routine whereas the unregistering procedure is conditionally guarded and executes only if HV_FEATURE_GUEST_CRASH_MSR_AVAILABLE capability is set. This patch fixes that by unconditionally unregistering the panic notifier in the module's exit routine as well. Fixes: 74347a99e73a ("x86/Hyper-V: Unload vmbus channel in hv panic callback") Signed-off-by: Guilherme G. Piccoli <gpiccoli@igalia.com> Reviewed-by: Michael Kelley <mikelley@microsoft.com> Link: https://lore.kernel.org/r/20220315203535.682306-1-gpiccoli@igalia.com Signed-off-by: Wei Liu <wei.liu@kernel.org>
2022-03-29Drivers: hv: vmbus: Fix initialization of device object in ↵Andrea Parri (Microsoft)
vmbus_device_register() Initialize the device's dma_{mask,parms} pointers and the device's dma_mask value before invoking device_register(). Address the following trace with 5.17-rc7: [ 49.646839] WARNING: CPU: 0 PID: 189 at include/linux/dma-mapping.h:543 netvsc_probe+0x37a/0x3a0 [hv_netvsc] [ 49.646928] Call Trace: [ 49.646930] <TASK> [ 49.646935] vmbus_probe+0x40/0x60 [hv_vmbus] [ 49.646942] really_probe+0x1ce/0x3b0 [ 49.646948] __driver_probe_device+0x109/0x180 [ 49.646952] driver_probe_device+0x23/0xa0 [ 49.646955] __device_attach_driver+0x76/0xe0 [ 49.646958] ? driver_allows_async_probing+0x50/0x50 [ 49.646961] bus_for_each_drv+0x84/0xd0 [ 49.646964] __device_attach+0xed/0x170 [ 49.646967] device_initial_probe+0x13/0x20 [ 49.646970] bus_probe_device+0x8f/0xa0 [ 49.646973] device_add+0x41a/0x8e0 [ 49.646975] ? hrtimer_init+0x28/0x80 [ 49.646981] device_register+0x1b/0x20 [ 49.646983] vmbus_device_register+0x5e/0xf0 [hv_vmbus] [ 49.646991] vmbus_add_channel_work+0x12d/0x190 [hv_vmbus] [ 49.646999] process_one_work+0x21d/0x3f0 [ 49.647002] worker_thread+0x4a/0x3b0 [ 49.647005] ? process_one_work+0x3f0/0x3f0 [ 49.647007] kthread+0xff/0x130 [ 49.647011] ? kthread_complete_and_exit+0x20/0x20 [ 49.647015] ret_from_fork+0x22/0x30 [ 49.647020] </TASK> [ 49.647021] ---[ end trace 0000000000000000 ]--- Fixes: 743b237c3a7b0 ("scsi: storvsc: Add Isolation VM support for storvsc driver") Signed-off-by: Andrea Parri (Microsoft) <parri.andrea@gmail.com> Reviewed-by: Michael Kelley <mikelley@microsoft.com> Link: https://lore.kernel.org/r/20220315141053.3223-1-parri.andrea@gmail.com Signed-off-by: Wei Liu <wei.liu@kernel.org>
2022-03-29Drivers: hv: vmbus: Deactivate sysctl_record_panic_msg by default in ↵Andrea Parri (Microsoft)
isolated guests hv_panic_page might contain guest-sensitive information, do not dump it over to Hyper-V by default in isolated guests. While at it, update some comments in hyperv_{panic,die}_event(). Reported-by: Dexuan Cui <decui@microsoft.com> Signed-off-by: Andrea Parri (Microsoft) <parri.andrea@gmail.com> Reviewed-by: Dexuan Cui <decui@microsoft.com> Link: https://lore.kernel.org/r/20220301141135.2232-1-parri.andrea@gmail.com Signed-off-by: Wei Liu <wei.liu@kernel.org>
2022-03-29net: lan966x: fix kernel oops on ioctl when I/F is downMichael Walle
ioctls handled by phy_mii_ioctl() will cause a kernel oops when the interface is down. Fix it by making sure there is a PHY attached. Fixes: 735fec995b21 ("net: lan966x: Implement SIOCSHWTSTAMP and SIOCGHWTSTAMP") Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20220328220350.3118969-1-michael@walle.cc Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-03-29nvme-multipath: fix hang when disk goes live over reconnectAnton Eidelman
nvme_mpath_init_identify() invoked from nvme_init_identify() fetches a fresh ANA log from the ctrl. This is essential to have an up to date path states for both existing namespaces and for those scan_work may discover once the ctrl is up. This happens in the following cases: 1) A new ctrl is being connected. 2) An existing ctrl is successfully reconnected. 3) An existing ctrl is being reset. While in (1) ctrl->namespaces is empty, (2 & 3) may have namespaces, and nvme_read_ana_log() may call nvme_update_ns_ana_state(). This result in a hang when the ANA state of an existing namespace changes and makes the disk live: nvme_mpath_set_live() issues IO to the namespace through the ctrl, which does NOT have IO queues yet. See sample hang below. Solution: - nvme_update_ns_ana_state() to call set_live only if ctrl is live - nvme_read_ana_log() call from nvme_mpath_init_identify() therefore only fetches and parses the ANA log; any erros in this process will fail the ctrl setup as appropriate; - a separate function nvme_mpath_update() is called in nvme_start_ctrl(); this parses the ANA log without fetching it. At this point the ctrl is live, therefore, disks can be set live normally. Sample failure: nvme nvme0: starting error recovery nvme nvme0: Reconnecting in 10 seconds... block nvme0n6: no usable path - requeuing I/O INFO: task kworker/u8:3:312 blocked for more than 122 seconds. Tainted: G E 5.14.5-1.el7.elrepo.x86_64 #1 Workqueue: nvme-wq nvme_tcp_reconnect_ctrl_work [nvme_tcp] Call Trace: __schedule+0x2a2/0x7e0 schedule+0x4e/0xb0 io_schedule+0x16/0x40 wait_on_page_bit_common+0x15c/0x3e0 do_read_cache_page+0x1e0/0x410 read_cache_page+0x12/0x20 read_part_sector+0x46/0x100 read_lba+0x121/0x240 efi_partition+0x1d2/0x6a0 bdev_disk_changed.part.0+0x1df/0x430 bdev_disk_changed+0x18/0x20 blkdev_get_whole+0x77/0xe0 blkdev_get_by_dev+0xd2/0x3a0 __device_add_disk+0x1ed/0x310 device_add_disk+0x13/0x20 nvme_mpath_set_live+0x138/0x1b0 [nvme_core] nvme_update_ns_ana_state+0x2b/0x30 [nvme_core] nvme_update_ana_state+0xca/0xe0 [nvme_core] nvme_parse_ana_log+0xac/0x170 [nvme_core] nvme_read_ana_log+0x7d/0xe0 [nvme_core] nvme_mpath_init_identify+0x105/0x150 [nvme_core] nvme_init_identify+0x2df/0x4d0 [nvme_core] nvme_init_ctrl_finish+0x8d/0x3b0 [nvme_core] nvme_tcp_setup_ctrl+0x337/0x390 [nvme_tcp] nvme_tcp_reconnect_ctrl_work+0x24/0x40 [nvme_tcp] process_one_work+0x1bd/0x360 worker_thread+0x50/0x3d0 Signed-off-by: Anton Eidelman <anton@lightbitslabs.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de>
2022-03-29nvme: fix RCU hole that allowed for endless looping in multipath round robinChris Leech
Make nvme_ns_remove match the assumptions elsewhere. 1) !NVME_NS_READY needs to be srcu synchronized to make sure nothing is running in __nvme_find_path or nvme_round_robin_path that will re-assign this ns to current_path. 2) Any matching current_path entries need to be cleared before removing from the siblings list, to prevent calling nvme_round_robin_path with an "old" ns that's off list. 3) Finally the list_del_rcu can happen, and then synchronize again before releasing any reference counts. Signed-off-by: Christoph Hellwig <hch@lst.de>
2022-03-29nvme: allow duplicate NSIDs for private namespacesSungup Moon
A NVMe subsystem with multiple controller can have private namespaces that use the same NSID under some conditions: "If Namespace Management, ANA Reporting, or NVM Sets are supported, the NSIDs shall be unique within the NVM subsystem. If the Namespace Management, ANA Reporting, and NVM Sets are not supported, then NSIDs: a) for shared namespace shall be unique; and b) for private namespace are not required to be unique." Reference: Section 6.1.6 NSID and Namespace Usage; NVM Express 1.4c spec. Make sure this specific setup is supported in Linux. Fixes: 9ad1927a3bc2 ("nvme: always search for namespace head") Signed-off-by: Sungup Moon <sungup.moon@samsung.com> [hch: refactored and fixed the controller vs subsystem based naming conflict] Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
2022-03-29nvmet: remove redundant assignment after left shiftColin Ian King
The left shift is followed by a re-assignment back to cc_css, the assignment is redundant. Fix this by replacing the "<<=" operator with "<<" instead. This cleans up the clang scan build warning: drivers/nvme/target/core.c:1124:10: warning: Although the value stored to 'cc_css' is used in the enclosing expression, the value is never actually read from 'cc_css' [deadcode.DeadStores] Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Reviewed-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2022-03-29nvmet: use a private workqueue instead of the system workqueueSagi Grimberg
Any attempt to flush kernel-global WQs has possibility of deadlock so we should simply stop using them, instead introduce nvmet_wq which is the generic nvmet workqueue for work elements that don't explicitly require a dedicated workqueue (by the mere fact that they are using the system_wq). Changes were done using the following replaces: - s/schedule_work(/queue_work(nvmet_wq, /g - s/schedule_delayed_work(/queue_delayed_work(nvmet_wq, /g - s/flush_scheduled_work()/flush_workqueue(nvmet_wq)/g Reported-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2022-03-29dma-buf: handle empty dma_fence_arrays gracefullyChristian König
A bug inside the new sync-file merge code created empty dma_fence_array instances. Warn about that and handle those without crashing. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220329070001.134180-2-christian.koenig@amd.com
2022-03-29dma-buf/sync-file: fix logic error in new fence merge codeChristian König
When the array is empty because everything is signaled we can't use add_fence() to add something because that would filter the signaled fence again. Signed-off-by: Christian König <christian.koenig@amd.com> Fixes: 519f490db07e ("dma-buf/sync-file: fix warning about fence containers") Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220329070001.134180-1-christian.koenig@amd.com
2022-03-28ice: xsk: Fix indexing in ice_tx_xsk_pool()Maciej Fijalkowski
Ice driver tries to always create XDP rings array to be num_possible_cpus() sized, regardless of user's queue count setting that can be changed via ethtool -L for example. Currently, ice_tx_xsk_pool() calculates the qid by decrementing the ring->q_index by the count of XDP queues, but ring->q_index is set to 'i + vsi->alloc_txq'. When user did ethtool -L $IFACE combined 1, alloc_txq is 1, but vsi->num_xdp_txq is still num_possible_cpus(). Then, ice_tx_xsk_pool() will do OOB access and in the final result ring would not get xsk_pool pointer assigned. Then, each ice_xsk_wakeup() call will fail with error and it will not be possible to get into NAPI and do the processing from driver side. Fix this by decrementing vsi->alloc_txq instead of vsi->num_xdp_txq from ring-q_index in ice_tx_xsk_pool() so the calculation is reflected to the setting of ring->q_index. Fixes: 22bf877e528f ("ice: introduce XDP_TX fallback path") Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20220328142123.170157-5-maciej.fijalkowski@intel.com
2022-03-28ice: xsk: Stop Rx processing when ntc catches ntuMaciej Fijalkowski
This can happen with big budget values and some breakage of re-filling descriptors as we do not clear the entry that ntu is pointing at the end of ice_alloc_rx_bufs_zc. So if ntc is at ntu then it might be the case that status_error0 has an old, uncleared value and ntc would go over with processing which would result in false results. Break Rx loop when ntc == ntu to avoid broken behavior. Fixes: 3876ff525de7 ("ice: xsk: Handle SW XDP ring wrap and bump tail more often") Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20220328142123.170157-4-maciej.fijalkowski@intel.com
2022-03-28ice: xsk: Eliminate unnecessary loop iterationMagnus Karlsson
The NIC Tx ring completion routine cleans entries from the ring in batches. However, it processes one more batch than it is supposed to. Note that this does not matter from a functionality point of view since it will not find a set DD bit for the next batch and just exit the loop. But from a performance perspective, it is faster to terminate the loop before and not issue an expensive read over PCIe to get the DD bit. Fixes: 126cdfe1007a ("ice: xsk: Improve AF_XDP ZC Tx and use batching API") Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20220328142123.170157-3-maciej.fijalkowski@intel.com
2022-03-28Merge tag 'net-5.18-rc0' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Including fixes from netfilter. Current release - regressions: - llc: only change llc->dev when bind() succeeds, fix null-deref Current release - new code bugs: - smc: fix a memory leak in smc_sysctl_net_exit() - dsa: realtek: make interface drivers depend on OF Previous releases - regressions: - sched: act_ct: fix ref leak when switching zones Previous releases - always broken: - netfilter: egress: report interface as outgoing - vsock/virtio: enable VQs early on probe and finish the setup before using them Misc: - memcg: enable accounting for nft objects" * tag 'net-5.18-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (39 commits) Revert "selftests: net: Add tls config dependency for tls selftests" net/smc: Send out the remaining data in sndbuf before close net: move net_unlink_todo() out of the header net: dsa: bcm_sf2_cfp: fix an incorrect NULL check on list iterator net: bnxt_ptp: fix compilation error selftests: net: Add tls config dependency for tls selftests memcg: enable accounting for nft objects net/sched: act_ct: fix ref leak when switching zones net/smc: fix a memory leak in smc_sysctl_net_exit() selftests: tls: skip cmsg_to_pipe tests with TLS=n octeontx2-af: initialize action variable net: sparx5: switchdev: fix possible NULL pointer dereference net/x25: Fix null-ptr-deref caused by x25_disconnect qlcnic: dcb: default to returning -EOPNOTSUPP net: sparx5: depends on PTP_1588_CLOCK_OPTIONAL net: hns3: fix phy can not link up when autoneg off and reset net: hns3: add NULL pointer check for hns3_set/get_ringparam() net: hns3: add netdev reset check for hns3_set_tunable() net: hns3: clean residual vf config after disable sriov net: hns3: add max order judgement for tx spare buffer ...
2022-03-28net: dsa: bcm_sf2_cfp: fix an incorrect NULL check on list iteratorXiaomeng Tong
The bug is here: return rule; The list iterator value 'rule' will *always* be set and non-NULL by list_for_each_entry(), so it is incorrect to assume that the iterator value will be NULL if the list is empty or no element is found. To fix the bug, return 'rule' when found, otherwise return NULL. Fixes: ae7a5aff783c7 ("net: dsa: bcm_sf2: Keep copy of inserted rules") Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Xiaomeng Tong <xiam0nd.tong@gmail.com> Link: https://lore.kernel.org/r/20220328032431.22538-1-xiam0nd.tong@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-28Merge tag 'for-linus-5.18-rc1-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen updates from Juergen Gross: - A bunch of minor cleanups - A fix for kexec in Xen dom0 when executed on a high cpu number - A fix for resuming after suspend of a Xen guest with assigned PCI devices - A fix for a crash due to not disabled preemption when resuming as Xen dom0 * tag 'for-linus-5.18-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen: fix is_xen_pmu() xen: don't hang when resuming PCI device arch:x86:xen: Remove unnecessary assignment in xen_apic_read() xen/grant-table: remove readonly parameter from functions xen/grant-table: remove gnttab_*transfer*() functions drivers/xen: use helper macro __ATTR_RW x86/xen: Fix kerneldoc warning xen: delay xen_hvm_init_time_ops() if kdump is boot on vcpu>=32 xen: use time_is_before_eq_jiffies() instead of open coding it
2022-03-28vdpa/mlx5: Avoid processing works if workqueue was destroyedEli Cohen
If mlx5_vdpa gets unloaded while a VM is running, the workqueue will be destroyed. However, vhost might still have reference to the kick function and might attempt to push new works. This could lead to null pointer dereference. To fix this, set mvdev->wq to NULL just before destroying and verify that the workqueue is not NULL in mlx5_vdpa_kick_vq before attempting to push a new work. Fixes: 5262912ef3cf ("vdpa/mlx5: Add support for control VQ and MAC setting") Signed-off-by: Eli Cohen <elic@nvidia.com> Link: https://lore.kernel.org/r/20220321141303.9586-1-elic@nvidia.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-03-28vhost: handle error while adding split ranges to iotlbAnirudh Rayabharam
vhost_iotlb_add_range_ctx() handles the range [0, ULONG_MAX] by splitting it into two ranges and adding them separately. The return value of adding the first range to the iotlb is currently ignored. Check the return value and bail out in case of an error. Signed-off-by: Anirudh Rayabharam <mail@anirudhrb.com> Link: https://lore.kernel.org/r/20220312141121.4981-1-mail@anirudhrb.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Fixes: e2ae38cf3d91 ("vhost: fix hung thread due to erroneous iotlb entries") Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
2022-03-28vdpa: support exposing the count of vqs to userspaceLongpeng
- GET_VQS_COUNT: the count of virtqueues that exposed Signed-off-by: Longpeng <longpeng2@huawei.com> Link: https://lore.kernel.org/r/20220315032553.455-4-longpeng2@huawei.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Longpeng &lt;<a href="mailto:longpeng2@huawei.com" target="_blank">longpeng2@huawei.com</a>&gt;<br> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
2022-03-28vdpa: change the type of nvqs to u32Longpeng
Change vdpa_device.nvqs and vhost_vdpa.nvqs to use u32 Signed-off-by: Longpeng <longpeng2@huawei.com> Link: https://lore.kernel.org/r/20220315032553.455-3-longpeng2@huawei.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Longpeng &lt;<a href="mailto:longpeng2@huawei.com" target="_blank">longpeng2@huawei.com</a>&gt;<br></blockquote><div><br></div><div>Acked-by: Jason Wang &lt;<a href="mailto:jasowang@redhat.com">jasowang@redhat.com</a>&gt;</div><div> </div><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex"> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
2022-03-28vdpa: support exposing the config size to userspaceLongpeng
- GET_CONFIG_SIZE: return the size of the virtio config space. The size contains the fields which are conditional on feature bits. Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Longpeng <longpeng2@huawei.com> Link: https://lore.kernel.org/r/20220315032553.455-2-longpeng2@huawei.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
2022-03-28vdpa/mlx5: re-create forwarding rules after mac modifiedMichael Qiu
When MAC Address has been modified in guest, we only re-add the Mac to mpfs, it is not enough, because the guest network will not work correctly: the reply package from outside will go straight away to the host VF net interface. This patch recreate the flow rules, and make it work correctly. Signed-off-by: Michael Qiu <qiudayu@archeros.com> Link: https://lore.kernel.org/r/1648446492-17614-1-git-send-email-08005325@163.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Eli Cohen <elic@nvidia.com>
2022-03-28virtio: pci: check bar values read from virtio config spaceKeir Fraser
virtio pci config structures may in future have non-standard bar values in the bar field. We should anticipate this by skipping any structures containing such a reserved value. The bar value should never change: check for harmful modified values we re-read it from the config space in vp_modern_map_capability(). Also clean up an existing check to consistently use PCI_STD_NUM_BARS. Signed-off-by: Keir Fraser <keirf@google.com> Link: https://lore.kernel.org/r/20220323140727.3499235-1-keirf@google.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-03-28Revert "virtio_pci: harden MSI-X interrupts"Jason Wang
This reverts commit 9e35276a5344f74d4a3600fc4100b3dd251d5c56. Issue were reported for the drivers that are using affinity managed IRQ where manually toggling IRQ status is not expected. And we forget to enable the interrupts in the restore path as well. In the future, we will rework on the interrupt hardening. Fixes: 9e35276a5344 ("virtio_pci: harden MSI-X interrupts") Reported-by: Marc Zyngier <maz@kernel.org> Reported-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/r/20220323031524.6555-2-jasowang@redhat.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-03-28Revert "virtio-pci: harden INTX interrupts"Jason Wang
This reverts commit 080cd7c3ac8701081d143a15ba17dd9475313188. Since the MSI-X interrupts hardening will be reverted in the next patch. We will rework the interrupt hardening in the future. Fixes: 080cd7c3ac87 ("virtio-pci: harden INTX interrupts") Signed-off-by: Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/r/20220323031524.6555-1-jasowang@redhat.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-03-28drivers/net/virtio_net: Added RSS hash report control.Andrew Melnychenko
Now it's possible to control supported hashflows. Added hashflow set/get callbacks. Also, disabling RXH_IP_SRC/DST for TCP would disable then for UDP. TCP and UDP supports only: ethtool -U eth0 rx-flow-hash tcp4 sd RXH_IP_SRC + RXH_IP_DST ethtool -U eth0 rx-flow-hash tcp4 sdfn RXH_IP_SRC + RXH_IP_DST + RXH_L4_B_0_1 + RXH_L4_B_2_3 Disabling happens because VirtioNET hashtype for IP doesn't check L4 proto, it works for all IP packets(TCP, UDP, ICMP, etc.). For TCP and UDP, it's possible to set IP+PORT hashes. But disabling IP hashes will disable them for TCP and UDP simultaneously. It's possible to set IP+PORT for TCP/UDP and disable/enable IP for everything else(UDP, ICMP, etc.). Signed-off-by: Andrew Melnychenko <andrew@daynix.com> Link: https://lore.kernel.org/r/20220328175336.10802-5-andrew@daynix.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-03-28drivers/net/virtio_net: Added RSS hash report.Andrew Melnychenko
Added features for RSS hash report. If hash is provided - it sets to skb. Added checks if rss and/or hash are enabled together. Signed-off-by: Andrew Melnychenko <andrew@daynix.com> Link: https://lore.kernel.org/r/20220328175336.10802-4-andrew@daynix.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-03-28drivers/net/virtio_net: Added basic RSS support.Andrew Melnychenko
Added features for RSS. Added initialization, RXHASH feature and ethtool ops. By default RSS/RXHASH is disabled. Virtio RSS "IPv6 extensions" hashes disabled. Added ethtools ops to set key and indirection table. Signed-off-by: Andrew Melnychenko <andrew@daynix.com> Link: https://lore.kernel.org/r/20220328175336.10802-3-andrew@daynix.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-03-28drivers/net/virtio_net: Fixed padded vheader to use v1 with hash.Andrew Melnychenko
The header v1 provides additional info about RSS. Added changes to computing proper header length. In the next patches, the header may contain RSS hash info for the hash population. Signed-off-by: Andrew Melnychenko <andrew@daynix.com> Link: https://lore.kernel.org/r/20220328175336.10802-2-andrew@daynix.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-03-28virtio: use virtio_device_ready() in virtio_device_restore()Stefano Garzarella
After waking up a suspended VM, the kernel prints the following trace for virtio drivers which do not directly call virtio_device_ready() in the .restore: PM: suspend exit irq 22: nobody cared (try booting with the "irqpoll" option) Call Trace: <IRQ> dump_stack_lvl+0x38/0x49 dump_stack+0x10/0x12 __report_bad_irq+0x3a/0xaf note_interrupt.cold+0xb/0x60 handle_irq_event+0x71/0x80 handle_fasteoi_irq+0x95/0x1e0 __common_interrupt+0x6b/0x110 common_interrupt+0x63/0xe0 asm_common_interrupt+0x1e/0x40 ? __do_softirq+0x75/0x2f3 irq_exit_rcu+0x93/0xe0 sysvec_apic_timer_interrupt+0xac/0xd0 </IRQ> <TASK> asm_sysvec_apic_timer_interrupt+0x12/0x20 arch_cpu_idle+0x12/0x20 default_idle_call+0x39/0xf0 do_idle+0x1b5/0x210 cpu_startup_entry+0x20/0x30 start_secondary+0xf3/0x100 secondary_startup_64_no_verify+0xc3/0xcb </TASK> handlers: [<000000008f9bac49>] vp_interrupt [<000000008f9bac49>] vp_interrupt Disabling IRQ #22 This happens because we don't invoke .enable_cbs callback in virtio_device_restore(). That callback is used by some transports (e.g. virtio-pci) to enable interrupts. Let's fix it, by calling virtio_device_ready() as we do in virtio_dev_probe(). This function calls .enable_cts callback and sets DRIVER_OK status bit. This fix also avoids setting DRIVER_OK twice for those drivers that call virtio_device_ready() in the .restore. Fixes: d50497eb4e55 ("virtio_config: introduce a new .enable_cbs method") Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Link: https://lore.kernel.org/r/20220322114313.116516-1-sgarzare@redhat.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
generated by cgit (git 2.34.1) at 2025-09-12 07:09:05 +0000