| Age | Commit message (Collapse) | Author |
|---|
|
Driver returns -EOPNOTSUPPORTED on unsupported parameters case in set
config. Upper level driver checks for -ENOTSUPP. Because of the return
code mismatch, the ioctls from userspace fail. Resolve the issue by
passing -ENOTSUPP during unsupported case.
Fixes: 7d3e4d807df2 ("misc: microchip: pci1xxxx: load gpio driver for the gpio controller auxiliary device enumerated by the auxiliary bus driver.")
Cc: stable <stable@kernel.org>
Signed-off-by: Rengarajan S <rengarajan.s@microchip.com>
Link: https://lore.kernel.org/r/20241205133626.1483499-3-rengarajan.s@microchip.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Resolve kernel panic caused by improper handling of IRQs while
accessing GPIO values. This is done by replacing generic_handle_irq with
handle_nested_irq.
Fixes: 1f4d8ae231f4 ("misc: microchip: pci1xxxx: Add gpio irq handler and irq helper functions irq_ack, irq_mask, irq_unmask and irq_set_type of irq_chip.")
Cc: stable <stable@kernel.org>
Signed-off-by: Rengarajan S <rengarajan.s@microchip.com>
Link: https://lore.kernel.org/r/20241205133626.1483499-2-rengarajan.s@microchip.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The documentation in rculist.h explains the absence of list_empty_rcu()
and cautions programmers against relying on a list_empty() ->
list_first() sequence in RCU safe code. This is because each of these
functions performs its own READ_ONCE() of the list head. This can lead
to a situation where the list_empty() sees a valid list entry, but the
subsequent list_first() sees a different view of list head state after a
modification.
In the case of dm-thin, this author had a production box crash from a GP
fault in the process_deferred_bios path. This function saw a valid list
head in get_first_thin() but when it subsequently dereferenced that and
turned it into a thin_c, it got the inside of the struct pool, since the
list was now empty and referring to itself. The kernel on which this
occurred printed both a warning about a refcount_t being saturated, and
a UBSAN error for an out-of-bounds cpuid access in the queued spinlock,
prior to the fault itself. When the resulting kdump was examined, it
was possible to see another thread patiently waiting in thin_dtr's
synchronize_rcu.
The thin_dtr call managed to pull the thin_c out of the active thins
list (and have it be the last entry in the active_thins list) at just
the wrong moment which lead to this crash.
Fortunately, the fix here is straight forward. Switch get_first_thin()
function to use list_first_or_null_rcu() which performs just a single
READ_ONCE() and returns NULL if the list is already empty.
This was run against the devicemapper test suite's thin-provisioning
suites for delete and suspend and no regressions were observed.
Signed-off-by: Krister Johansen <kjlx@templeofstupid.com>
Fixes: b10ebd34ccca ("dm thin: fix rcu_read_lock being held in code that can sleep")
Cc: stable@vger.kernel.org
Acked-by: Ming-Hung Tsai <mtsai@redhat.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
|
|
dm-ebs uses dm-bufio to process requests that are not aligned on logical
sector size. dm-bufio doesn't support passing integrity data (and it is
unclear how should it do it), so we shouldn't set the
DM_TARGET_PASSES_INTEGRITY flag.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
Fixes: d3c7b35c20d6 ("dm: add emulated block size target")
|
|
Adopt the `str_read_write` helper in event logging as suggested by the
coccinelle tool.
Signed-off-by: Pranjal Shrivastava <praan@google.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Link: https://lore.kernel.org/all/20250107130053.GC6991@willie-the-truck/
Link: https://lore.kernel.org/r/20250107165100.1093357-1-praan@google.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
The TSM module provides guest identification and attestation when a
guest runs in CCA realm mode. By creating a dummy platform device,
let's ensure the module is automatically loaded. The udev daemon loads
the TSM module after it receives a device addition event. Once that
happens, it can be used earlier in the boot process to decrypt the
rootfs.
Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Link: https://lore.kernel.org/r/20241220181236.172060-2-jeremy.linton@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Initialize rq to NULL to prevent uninitialized pointer reads.
Signed-off-by: Apoorva Singh <apoorva.singh@intel.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241227112920.1547592-1-apoorva.singh@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
The mite.c file was originally copied from the COMEDI code, and now that
it is in the kernel tree, along with the comedi code, on some build
configurations there are errors due to duplicate symbols (specifically
mite_dma_disarm).
Remove all of the unused functions in the gpib mite.c and .h files as
they aren't needed and cause the compiler to be confused.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/r/202501081239.BAPhfAHJ-lkp@intel.com/
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Link: https://lore.kernel.org/r/2025010809-padding-survive-91b3@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This helps several of my boards in CI.
|
|
Update the USB serial option driver to support Neoway N723-EA.
ID 2949:8700 Marvell Mobile Composite Device Bus
T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=2949 ProdID=8700 Rev= 1.00
S: Manufacturer=Marvell
S: Product=Mobile Composite Device Bus
S: SerialNumber=200806006809080000
C:* #Ifs= 5 Cfg#= 1 Atr=c0 MxPwr=500mA
A: FirstIf#= 0 IfCount= 2 Cls=e0(wlcon) Sub=01 Prot=03
I:* If#= 0 Alt= 0 #EPs= 1 Cls=e0(wlcon) Sub=01 Prot=03 Driver=rndis_host
E: Ad=87(I) Atr=03(Int.) MxPS= 64 Ivl=4096ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=rndis_host
E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=0c(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=89(I) Atr=03(Int.) MxPS= 64 Ivl=4096ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=0b(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=86(I) Atr=03(Int.) MxPS= 64 Ivl=4096ms
E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=0e(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 6 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=88(I) Atr=03(Int.) MxPS= 64 Ivl=4096ms
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=0a(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
Tested successfully connecting to the Internet via rndis interface after
dialing via AT commands on If#=4 or If#=6.
Not sure of the purpose of the other serial interface.
Signed-off-by: Michal Hrusecky <michal.hrusecky@turris.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
|
|
It looks like SRM815 shares ID with SRM825L.
T: Bus=03 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 0
D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=2dee ProdID=4d22 Rev= 4.14
S: Manufacturer=MEIG
S: Product=LTE-A Module
S: SerialNumber=123456
C:* #Ifs= 5 Cfg#= 1 Atr=80 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none)
E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Link: https://lore.kernel.org/lkml/20241215100027.1970930-1-amadeus@jmu.edu.cn/
Link: https://lore.kernel.org/all/4333b4d0-281f-439d-9944-5570cbc4971d@gmail.com/
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
|
|
Phoenix Contact sells UPS Quint devices [1] with a custom datacable [2]
that embeds a Silicon Labs converter:
Bus 001 Device 003: ID 1b93:1013 Silicon Labs Phoenix Contact UPS Device
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x1b93
idProduct 0x1013
bcdDevice 1.00
iManufacturer 1 Silicon Labs
iProduct 2 Phoenix Contact UPS Device
iSerial 3 <redacted>
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 0x0020
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
(Bus Powered)
MaxPower 100mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 2 Phoenix Contact UPS Device
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
[1] https://www.phoenixcontact.com/en-pc/products/power-supply-unit-quint-ps-1ac-24dc-10-2866763
[2] https://www.phoenixcontact.com/en-il/products/data-cable-preassembled-ifs-usb-datacable-2320500
Reported-by: Giuseppe Corbelli <giuseppe.corbelli@antaresvision.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
|
|
SMN access was bolted into amd_nb mostly as convenience. This has
limitations though that require incurring tech debt to keep it working.
Move SMN access to the newly introduced AMD Node driver.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> # pdx86
Acked-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> # PMF, PMC
Link: https://lore.kernel.org/r/20241206161210.163701-11-yazen.ghannam@amd.com
|
|
amd_pci_dev_to_node_id() tries to find the AMD node ID of a device by
searching and counting devices.
The AMD node ID of an AMD node device is simply its slot number minus
the AMD node 0 slot number.
Simplify this function and move it to k10temp.c.
[ Yazen: Update commit message and simplify function. ]
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Co-developed-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20241206161210.163701-10-yazen.ghannam@amd.com
|
|
Since commit 3feb70a61740 ("gpio: loongson: add more gpio chip
support"), the Loongson-2K2000 GPIO is supported.
However, according to the firmware development specification, the
Loongson-2K2000 ACPI GPIO register offsets in the driver do not match
the register base addresses in the firmware, resulting in the registers
not being accessed properly.
Now, we fix it to ensure the GPIO function works properly.
Cc: stable@vger.kernel.org
Cc: Yinbo Zhu <zhuyinbo@loongson.cn>
Fixes: 3feb70a61740 ("gpio: loongson: add more gpio chip support")
Co-developed-by: Hongliang Wang <wanghongliang@loongson.cn>
Signed-off-by: Hongliang Wang <wanghongliang@loongson.cn>
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Link: https://lore.kernel.org/r/20250107103856.1037222-1-zhoubinbin@loongson.cn
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
This reverts commit 483f7d94a0453564ad9295288c0242136c5f36a0.
This needs to be reverted since HDCP even after updating the connector
state HDCP property we don't reenable HDCP until the next commit
in which the CP Property is set causing compliance to fail.
--v2
-Fix build issue [Dnyaneshwar]
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Dnyaneshwar Bhadane <dnyaneshwar.bhadane@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250103084517.239998-1-suraj.kandpal@intel.com
(cherry picked from commit fcf73e20cd1fe60c3ba5f9626f1e8f9cd4511edf)
Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
|
|
Commit 99c21c7ca642 ("clk: qcom: Add X1P42100 GPUCC driver") adds the
config definition CLK_X1P42100_GPUCC. This config definition selects the
non-existing config CLK_X1E8010_GCC. Note that the config for the X1E80100
Global Clock Controller is CLK_X1E80100_GCC.
Assuming this was just a minor typo in the number, i.e., 8010 instead of
80100, change the definition to select the existing config
CLK_X1E80100_GCC, similarly to the definitions for three configs
CLK_X1E80100_{CAMCC,DISPCC,GPUCC}.
Fixes: 99c21c7ca642 ("clk: qcom: Add X1P42100 GPUCC driver")
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@redhat.com>
Link: https://lore.kernel.org/r/20250107104728.23098-1-lukas.bulwahn@redhat.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
MSM8940 has mostly the same rpm clocks as MSM8953, but lacks RF_CLK3.
Signed-off-by: Daniil Titov <daniilt971@gmail.com>
Signed-off-by: Barnabás Czémán <barnabas.czeman@mainlining.org>
Link: https://lore.kernel.org/r/20241231-rpmcc-v1-4-1212df9b2042@mainlining.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
MSM8937 has mostly the same rpm clocks as MSM8953, but lacks RF_CLK3 and
IPA_CLK.
Signed-off-by: Daniil Titov <daniilt971@gmail.com>
Signed-off-by: Barnabás Czémán <barnabas.czeman@mainlining.org>
Link: https://lore.kernel.org/r/20241231-rpmcc-v1-2-1212df9b2042@mainlining.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Use the icc-clk framework to enable few clocks to be able to
create paths and use the peripherals connected on those NoCs.
Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
Link: https://lore.kernel.org/r/20241213105808.674620-2-quic_varada@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
SM6115 (and its derivatives or similar SoCs) has an LPASS clock
controller block which provides audio-related resets.
Add the required code to support them.
[alexey.klimov] fixed compilation errors after rebase,
slightly changed the commit message
Cc: Konrad Dybcio <konradybcio@kernel.org>
Cc: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Alexey Klimov <alexey.klimov@linaro.org>
Link: https://lore.kernel.org/r/20241212002551.2902954-3-alexey.klimov@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The 'broadcast' register space is present only in chipsets that
have multiple instances of LLCC IP. Since IPQ5424 has only one
instance, both the LLCC and LLCC_BROADCAST points to the same
register space.
Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20241121051935.1055222-3-quic_varada@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
fm10k_iov_msg_mac_vlan_pf() has been unused since 2017's
commit 1f5c27e52857 ("fm10k: use the MAC/VLAN queue for VF<->PF MAC/VLAN
requests")
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20250106221929.956999-16-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Link queues to NAPI instances via netdev-genl API so that users can
query this information with netlink. Handle a few cases in the driver:
1. Link/unlink the NAPIs when XDP is enabled/disabled
2. Handle IGC_FLAG_QUEUE_PAIRS enabled and disabled
Example output when IGC_FLAG_QUEUE_PAIRS is enabled:
$ ./tools/net/ynl/cli.py --spec Documentation/netlink/specs/netdev.yaml \
--dump queue-get --json='{"ifindex": 2}'
[{'id': 0, 'ifindex': 2, 'napi-id': 8193, 'type': 'rx'},
{'id': 1, 'ifindex': 2, 'napi-id': 8194, 'type': 'rx'},
{'id': 2, 'ifindex': 2, 'napi-id': 8195, 'type': 'rx'},
{'id': 3, 'ifindex': 2, 'napi-id': 8196, 'type': 'rx'},
{'id': 0, 'ifindex': 2, 'napi-id': 8193, 'type': 'tx'},
{'id': 1, 'ifindex': 2, 'napi-id': 8194, 'type': 'tx'},
{'id': 2, 'ifindex': 2, 'napi-id': 8195, 'type': 'tx'},
{'id': 3, 'ifindex': 2, 'napi-id': 8196, 'type': 'tx'}]
Since IGC_FLAG_QUEUE_PAIRS is enabled, you'll note that the same NAPI ID
is present for both rx and tx queues at the same index, for example
index 0:
{'id': 0, 'ifindex': 2, 'napi-id': 8193, 'type': 'rx'},
{'id': 0, 'ifindex': 2, 'napi-id': 8193, 'type': 'tx'},
To test IGC_FLAG_QUEUE_PAIRS disabled, a test system was booted using
the grub command line option "maxcpus=2" to force
igc_set_interrupt_capability to disable IGC_FLAG_QUEUE_PAIRS.
Example output when IGC_FLAG_QUEUE_PAIRS is disabled:
$ lscpu | grep "On-line CPU"
On-line CPU(s) list: 0,2
$ ethtool -l enp86s0 | tail -5
Current hardware settings:
RX: n/a
TX: n/a
Other: 1
Combined: 2
$ cat /proc/interrupts | grep enp
144: [...] enp86s0
145: [...] enp86s0-rx-0
146: [...] enp86s0-rx-1
147: [...] enp86s0-tx-0
148: [...] enp86s0-tx-1
1 "other" IRQ, and 2 IRQs for each of RX and Tx, so we expect netlink to
report 4 IRQs with unique NAPI IDs:
$ ./tools/net/ynl/cli.py --spec Documentation/netlink/specs/netdev.yaml \
--dump napi-get --json='{"ifindex": 2}'
[{'id': 8196, 'ifindex': 2, 'irq': 148},
{'id': 8195, 'ifindex': 2, 'irq': 147},
{'id': 8194, 'ifindex': 2, 'irq': 146},
{'id': 8193, 'ifindex': 2, 'irq': 145}]
Now we examine which queues these NAPIs are associated with, expecting
that since IGC_FLAG_QUEUE_PAIRS is disabled each RX and TX queue will
have its own NAPI instance:
$ ./tools/net/ynl/cli.py --spec Documentation/netlink/specs/netdev.yaml \
--dump queue-get --json='{"ifindex": 2}'
[{'id': 0, 'ifindex': 2, 'napi-id': 8193, 'type': 'rx'},
{'id': 1, 'ifindex': 2, 'napi-id': 8194, 'type': 'rx'},
{'id': 0, 'ifindex': 2, 'napi-id': 8195, 'type': 'tx'},
{'id': 1, 'ifindex': 2, 'napi-id': 8196, 'type': 'tx'}]
Signed-off-by: Joe Damato <jdamato@fastly.com>
Reviewed-by: Vitaly Lifshits <vitaly.lifshits@intel.com>
Tested-by: Avigail Dahan <avigailx.dahan@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20250106221929.956999-15-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Link IRQs to NAPI instances via netdev-genl API so that users can query
this information with netlink.
Compare the output of /proc/interrupts (noting that IRQ 128 is the
"other" IRQ which does not appear to have a NAPI instance):
$ cat /proc/interrupts | grep enp86s0 | cut --delimiter=":" -f1
128
129
130
131
132
The output from netlink shows the mapping of NAPI IDs to IRQs (again
noting that 128 is absent as it is the "other" IRQ):
$ ./tools/net/ynl/cli.py --spec Documentation/netlink/specs/netdev.yaml \
--dump napi-get --json='{"ifindex": 2}'
[{'defer-hard-irqs': 0,
'gro-flush-timeout': 0,
'id': 8196,
'ifindex': 2,
'irq': 132},
{'defer-hard-irqs': 0,
'gro-flush-timeout': 0,
'id': 8195,
'ifindex': 2,
'irq': 131},
{'defer-hard-irqs': 0,
'gro-flush-timeout': 0,
'id': 8194,
'ifindex': 2,
'irq': 130},
{'defer-hard-irqs': 0,
'gro-flush-timeout': 0,
'id': 8193,
'ifindex': 2,
'irq': 129}]
Signed-off-by: Joe Damato <jdamato@fastly.com>
Reviewed-by: Vitaly Lifshits <vitaly.lifshits@intel.com>
Tested-by: Avigail Dahan <avigailx.dahan@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20250106221929.956999-14-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Implement "mdd-auto-reset-vf" priv-flag to handle Tx and Rx MDD events for VFs.
This flag is also used in other network adapters like ICE.
Usage:
- "on" - The problematic VF will be automatically reset
if a malformed descriptor is detected.
- "off" - The problematic VF will be disabled.
In cases where a VF sends malformed packets classified as malicious, it can
cause the Tx queue to freeze, rendering it unusable for several minutes. When
an MDD event occurs, this new implementation allows for a graceful VF reset to
quickly restore operational state.
Currently, VF queues are disabled if an MDD event occurs. This patch adds the
ability to reset the VF if a Tx or Rx MDD event occurs. It also includes MDD
event logging throttling to avoid dmesg pollution and unifies the format of
Tx and Rx MDD messages.
Note: Standard message rate limiting functions like dev_info_ratelimited()
do not meet our requirements. Custom rate limiting is implemented,
please see the code for details.
Co-developed-by: Jan Sokolowski <jan.sokolowski@intel.com>
Signed-off-by: Jan Sokolowski <jan.sokolowski@intel.com>
Co-developed-by: Padraig J Connolly <padraig.j.connolly@intel.com>
Signed-off-by: Padraig J Connolly <padraig.j.connolly@intel.com>
Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Michal Schmidt <mschmidt@redhat.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20250106221929.956999-13-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
ixgbevf_run_xdp() converts customed xdp action to a negative error code
with the sk_buff pointer type which be checked with IS_ERR in
ixgbevf_clean_rx_irq(). Remove this error pointer handing instead use
plain int return value.
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20250106221929.956999-12-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
ixgbe_run_xdp() converts customed xdp action to a negative error code
with the sk_buff pointer type which be checked with IS_ERR in
ixgbe_clean_rx_irq(). Remove this error pointer handing instead use
plain int return value.
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20250106221929.956999-11-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
igb_run_xdp() converts customed xdp action to a negative error code
with the sk_buff pointer type which be checked with IS_ERR in
igb_clean_rx_irq(). Remove this error pointer handing instead use plain
int return value.
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20250106221929.956999-10-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
igc_xdp_run_prog() converts customed xdp action to a negative error code
with the sk_buff pointer type which be checked with IS_ERR in
igc_clean_rx_irq(). Remove this error pointer handing instead use plain
int return value to fix this smatch warnings:
drivers/net/ethernet/intel/igc/igc_main.c:2533
igc_xdp_run_prog() warn: passing zero to 'ERR_PTR'
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Avigail Dahan <avigailx.dahan@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20250106221929.956999-9-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently, the driver would always close and reopen the network interface
when setting/removing the XDP program, regardless of the presence of XDP
resources. This could cause unnecessary disruptions.
To avoid this, introduces a check to determine if there is a need to
close and reopen the interface, allowing for seamless hot-swapping of
XDP programs.
Signed-off-by: Song Yoong Siang <yoong.siang.song@intel.com>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Tested-by: Avigail Dahan <avigailx.dahan@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20250106221929.956999-8-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add support for AF_XDP zero-copy transmit path.
A new TX buffer type IGB_TYPE_XSK is introduced to indicate that the Tx
frame was allocated from the xsk buff pool, so igb_clean_tx_ring() and
igb_clean_tx_irq() can clean the buffers correctly based on type.
igb_xmit_zc() performs the actual packet transmit when AF_XDP zero-copy is
enabled. We share the TX ring between slow path, XDP and AF_XDP
zero-copy, so we use the netdev queue lock to ensure mutual exclusion.
Signed-off-by: Sriram Yagnaraman <sriram.yagnaraman@est.tech>
[Kurt: Set olinfo_status in igb_xmit_zc() so that frames are transmitted,
Use READ_ONCE() for xsk_pool and check Tx disabled and carrier in
igb_xmit_zc(), Add FIXME for RS bit]
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Tested-by: George Kuruvinakunnel <george.kuruvinakunnel@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20250106221929.956999-7-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add support for AF_XDP zero-copy receive path.
When AF_XDP zero-copy is enabled, the rx buffers are allocated from the
xsk buff pool using igb_alloc_rx_buffers_zc().
Use xsk_pool_get_rx_frame_size() to set SRRCTL rx buf size when zero-copy
is enabled.
Signed-off-by: Sriram Yagnaraman <sriram.yagnaraman@est.tech>
[Kurt: Port to v6.12 and provide napi_id for xdp_rxq_info_reg(),
RCT, remove NETDEV_XDP_ACT_XSK_ZEROCOPY, update NTC handling,
READ_ONCE() xsk_pool, likelyfy for XDP_REDIRECT case]
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Tested-by: George Kuruvinakunnel <george.kuruvinakunnel@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20250106221929.956999-6-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Move XDP finalize and Rx statistics update into separate functions. This
way, they can be reused by the XDP and XDP/ZC code later.
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Tested-by: George Kuruvinakunnel <george.kuruvinakunnel@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20250106221929.956999-5-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add the following ring flag:
- IGB_RING_FLAG_TX_DISABLED (when xsk pool is being setup)
Add a xdp_buff array for use with XSK receive batch API, and a pointer
to xsk_pool in igb_adapter.
Add enable/disable functions for TX and RX rings.
Add enable/disable functions for XSK pool.
Add xsk wakeup function.
None of the above functionality will be active until
NETDEV_XDP_ACT_XSK_ZEROCOPY is advertised in netdev->xdp_features.
Signed-off-by: Sriram Yagnaraman <sriram.yagnaraman@est.tech>
[Kurt: Add READ/WRITE_ONCE(), synchronize_net(),
remove IGB_RING_FLAG_AF_XDP_ZC]
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Tested-by: George Kuruvinakunnel <george.kuruvinakunnel@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20250106221929.956999-4-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Introduce igb_xdp_is_enabled() to check if an XDP program is assigned to
the device. Use that wherever xdp_prog is read and evaluated.
Signed-off-by: Sriram Yagnaraman <sriram.yagnaraman@est.tech>
[Kurt: Split patches and use READ_ONCE()]
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Tested-by: George Kuruvinakunnel <george.kuruvinakunnel@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20250106221929.956999-3-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Remove static qualifiers on the following functions to be able to call
from XSK specific file that is added in the later patches:
- igb_xdp_tx_queue_mapping()
- igb_xdp_ring_update_tail()
- igb_clean_tx_ring()
- igb_clean_rx_ring()
- igb_xdp_xmit_back()
- igb_process_skb_fields()
While at it, inline igb_xdp_tx_queue_mapping() and
igb_xdp_ring_update_tail(). These functions are small enough and used in
XDP hot paths.
Signed-off-by: Sriram Yagnaraman <sriram.yagnaraman@est.tech>
[Kurt: Split patches, inline small XDP functions]
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Tested-by: George Kuruvinakunnel <george.kuruvinakunnel@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20250106221929.956999-2-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add support to access EC memory region HOST command and ACPI memory
region directly.
The memory region comes from the CRS ACPI resource descriptor.
The driver retrieves the memory information by adding a resource walker
for the CRS region. If a memory region is found, it is mapped and the
driver uses a new set of read/write primitives to access the EC doorbell
and external registers.
Once the memory is mapped, it belongs to the driver:
grep GOOG0004 /proc/iomem
fe0b0000-fe0bffff : GOOG0004:00
We can verify the communication is established checking the EC version,
or monitoring the commands using the cros-ec kernel tracer.
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Link: https://lore.kernel.org/r/20250107174514.2748108-3-gwendal@chromium.org
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
|
|
Remove cros_ec_lpc_ops global variable, since EC specific info can be
stored in the device private structure, introduced in
commit e4dbf9d65e4218 ("platform/chrome: cros_ec_lpc: add a "quirks" system").
Add ec_lpc pointer to read/write function to be able to access ec
specific data.
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Link: https://lore.kernel.org/r/20250107174514.2748108-2-gwendal@chromium.org
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
|
|
Commit f85949f98206 ("xdp: add xdp_set_features_flag utility routine")
added routines to inform the core about XDP flag changes.
GVE support was added around the same time and missed using them.
GVE only changes the flags on error recover or resume.
Presumably the flags may change during resume if VM migrated.
User would not get the notification and upper devices would
not get a chance to recalculate their flags.
Fixes: 75eaae158b1b ("gve: Add XDP DROP and TX support for GQI-QPL format")
Reviewed-By: Jeroen de Borst <jeroendb@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250106180210.1861784-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
qca8k_get_mac_eee() is no longer called by the core DSA code. Remove it.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1tUllP-007UzF-Gk@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
mv88e6xxx_get_mac_eee() is no longer called by the core DSA code.
Remove it.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1tUllK-007Uz9-D7@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
mt753x_get_mac_eee() is no longer called by the core DSA code. Remove
it.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Chester A. Unal <chester.a.unal@arinc9.com>
Link: https://patch.msgid.link/E1tUllF-007Uz3-95@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
ksz_get_mac_eee() is no longer called by the core DSA code. Remove it.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1tUllA-007Uyx-4o@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
b53_get_mac_eee() is no longer called by the core DSA code. Remove it.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1tUll5-007Uyr-1U@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
dsa_user_get_eee() calls the DSA switch get_mac_eee() method followed
by phylink_ethtool_get_eee(), which goes on to call
phy_ethtool_get_eee(). This overwrites all members of the passed
ethtool_keee, which means anything written by the DSA switch
get_mac_eee() method will be discarded.
Remove setting any members in mt753x_get_mac_eee().
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Chester A. Unal <chester.a.unal@arinc9.com>
Link: https://patch.msgid.link/E1tUlku-007Uyc-RP@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
dsa_user_get_eee() calls the DSA switch get_mac_eee() method followed
by phylink_ethtool_get_eee(), which goes on to call
phy_ethtool_get_eee(). This overwrites all members of the passed
ethtool_keee, which means anything written by the DSA switch
get_mac_eee() method will be discarded.
Remove setting any members in ksz_get_mac_eee().
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1tUlkp-007UyW-OR@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The const struct ixgbevf_hv_mbx_ops was added in 2016 as part of
commit c6d45171d706 ("ixgbevf: Support Windows hosts (Hyper-V)")
but has remained unused.
The functions it references are still referenced elsewhere.
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Link: https://patch.msgid.link/20250105122847.27341-1-linux@treblig.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In commit d7811e623dd4 ("[NET]: Drop tx lock in dev_watchdog_up")
dev_watchdog_up() became a simple wrapper for __netdev_watchdog_up()
Herbert also said : "In 2.6.19 we can eliminate the unnecessary
__dev_watchdog_up and replace it with dev_watchdog_up."
This patch consolidates things to have only two functions, with
a common prefix.
- netdev_watchdog_up(), exported for the sake of one freescale driver.
This replaces __netdev_watchdog_up() and dev_watchdog_up().
- netdev_watchdog_down(), static to net/sched/sch_generic.c
This replaces dev_watchdog_down().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Link: https://patch.msgid.link/20250105090924.1661822-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Similar to the earlier fixes meant for sm8x50 and x1e platforms,
we have to stop using the shared clk ops for sdm845 QUPs as well.
As Stephen Boyd pointed out in earlier fixes, there wasn't a problem
to mark QUP clks shared until we started parking shared RCGs at clk
registration time in commit 01a0a6cc8cfd ("clk: qcom: Park shared RCGs
upon registration"). Parking at init is actually harmful to the UART
when earlycon is used. If the device is pumping out data while the
frequency changes and we see garbage on the serial console until the
driver can probe and actually set a proper frequency.
This patch reverts the QUP clk sharing ops part of commit 06391eddb60a
("clk: qcom: Add Global Clock controller (GCC) driver for SDM845"), so
that the QUPs on sdm845 don't get parked during clk registration and
break UART operations.
Fixes: 01a0a6cc8cfd ("clk: qcom: Park shared RCGs upon registration")
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
Link: https://lore.kernel.org/r/20241209174912.2526928-1-amit.pundir@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
