summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2025-01-16net: mvneta: convert to phylink EEE implementationRussell King (Oracle)
Convert mvneta to use phylink's EEE implementation by implementing the two LPI control methods, and adding the initial configuration and capabilities. Although disabling LPI requires clearing a single bit, for safety we clear the manual mode and force bits to ensure that auto mode will be used. Enabling LPI needs a full configuration of several values, as the timer values are dependent on the MAC operating speed, as per the original code. As Armada 388 states that EEE is only supported in "SGMII" modes, mark this in lpi_interfaces. Testing with RGMII on the Clearfog platform indicates that the receive path fails to detect LPI over RGMII. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/E1tYADv-0014Pt-NO@rmk-PC.armlinux.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-16net: phylink: add EEE managementRussell King (Oracle)
Add EEE management to phylink, making use of the phylib implementation. This will only be used where a MAC driver populates the methods and capabilities bitfield, otherwise we keep our old behaviour. Phylink will keep track of the EEE configuration, including the clock stop abilities at each end of the MAC to PHY link, programming the PHY appropriately and preserving the LPI configuration should the PHY go away. Phylink will call into the MAC driver when LPI needs to be enabled or disabled, with the requirement that the MAC have LPI disabled prior to the netdev being brought up (in other words, it will only call mac_disable_tx_lpi() if it has already called mac_enable_tx_lpi().) Support for phylink managed EEE is enabled by populating both tx_lpi MAC operations method pointers, and filling in both LPI interfaces and capabilities. If the methods are provided but the LPI interfaces or capabilities remain empty, this indicates to phylink that EEE is implemented by the driver but the hardware it is driving does not support EEE, and thus the ethtool set_eee() and get_eee() methods will return EOPNOTSUPP. No validation of the LPI timer value is performed by this patch. For interface modes which do not support LPI, we make no attempt to manipulate the phylib EEE advertisement, but instead refuse to activate LPI at the MAC, noting it at debug message level. We also restrict the advertisement and reported userspace support linkmode masks according to the lpi_capabilities provided to phylink by the MAC driver. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/E1tYADq-0014Pn-J1@rmk-PC.armlinux.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-16net: phylink: add phylink_link_is_up() helperRussell King (Oracle)
Add a helper to determine whether the link is up or down. Currently this is only used in one location, but becomes necessary to test when reconfiguring EEE. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/E1tYADl-0014Ph-EV@rmk-PC.armlinux.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-16net: phy: add support for querying PHY clock stop capabilityRussell King (Oracle)
Add support for querying whether the PHY allows the transmit xMII clock to be stopped while in LPI mode. This will be used by phylink to pass to the MAC driver so it can configure the generation of the xMII clock appropriately. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/E1tYADg-0014Pb-AJ@rmk-PC.armlinux.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-17Merge tag 'drm-xe-fixes-2025-01-16' of ↵Dave Airlie
https://gitlab.freedesktop.org/drm/xe/kernel into drm-fixes Driver Changes: - Add steering info support for GuC register lists (Jesus Narvaez) - Add means to wait for reset and synchronous reset (Maciej) - Make changing ccs_mode a synchronous action (Maciej) - Add missing mux registers (Ashutosh) - Mark ComputeCS read mode as UC on iGPU, unblocking ULLS on iGPU (Matt Brost) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Thomas Hellstrom <thomas.hellstrom@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/Z4ll3F1anLEwCvrf@fedora
2025-01-17Merge tag 'drm-intel-fixes-2025-01-15' of ↵Dave Airlie
https://gitlab.freedesktop.org/drm/i915/kernel into drm-fixes - Relax clear color alignment to 64 bytes [fb] (Ville Syrjälä) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Tvrtko Ursulin <tursulin@igalia.com> Link: https://patchwork.freedesktop.org/patch/msgid/Z4fdIVf68qsqIpiN@linux
2025-01-16clk: analogbits: Fix incorrect calculation of vco rate deltaBo Gan
In wrpll_configure_for_rate() we try to determine the best PLL configuration for a target rate. However, in the loop where we try values of R, we should compare the derived `vco` with `target_vco_rate`. However, we were in fact comparing it with `target_rate`, which is actually after Q shift. This is incorrect, and sometimes can result in suboptimal clock rates. Fix it. Fixes: 7b9487a9a5c4 ("clk: analogbits: add Wide-Range PLL library") Signed-off-by: Bo Gan <ganboing@gmail.com> Link: https://lore.kernel.org/r/20240830061639.2316-1-ganboing@gmail.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2025-01-16Input: xpad - add QH Electronics VID/PIDPierre-Loup A. Griffais
Add support for QH Electronics Xbox 360-compatible controller Signed-off-by: Pierre-Loup A. Griffais <pgriffais@valvesoftware.com> Signed-off-by: Vicki Pfau <vi@endrift.com> Link: https://lore.kernel.org/r/20250116012518.3476735-1-vi@endrift.com Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2025-01-16clk: bcm: rpi: Add disp clockMaxime Ripard
BCM2712 has an extra clock exposed by the firmware called DISP, and used by (at least) the HVS. Let's add it to the list of clocks to register in Linux. Acked-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Maxime Ripard <mripard@kernel.org> Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://lore.kernel.org/r/20250116-bcm2712-clk-updates-v1-5-10bc92ffbf41@raspberrypi.com Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2025-01-16clk: bcm: rpi: Create helper to retrieve private dataMaxime Ripard
The RaspberryPi firmware clocks driver uses in several instances a container_of to retrieve the struct raspberrypi_clk_data from a pointer to struct clk_hw. Let's create a small function to avoid duplicating it all over the place. Acked-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Maxime Ripard <mripard@kernel.org> Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://lore.kernel.org/r/20250116-bcm2712-clk-updates-v1-4-10bc92ffbf41@raspberrypi.com Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2025-01-16clk: bcm: rpi: Enable minimize for all firmware clocksDom Cobley
There isn't a reason not to minimise the clocks, and it saves some power. Acked-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Dom Cobley <popcornmix@gmail.com> Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://lore.kernel.org/r/20250116-bcm2712-clk-updates-v1-3-10bc92ffbf41@raspberrypi.com Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2025-01-16clk: bcm: rpi: Allow cpufreq driver to also adjust gpu clocksDom Cobley
For performance/power it is beneficial to adjust gpu clocks with arm clock. This is how the downstream cpufreq driver works Acked-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Dom Cobley <popcornmix@gmail.com> Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://lore.kernel.org/r/20250116-bcm2712-clk-updates-v1-2-10bc92ffbf41@raspberrypi.com Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2025-01-16clk: bcm: rpi: Add ISP to exported clocksDom Cobley
The ISP clock can be controlled by the driver, so register it with the clock subsystem. Acked-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Dom Cobley <popcornmix@gmail.com> Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://lore.kernel.org/r/20250116-bcm2712-clk-updates-v1-1-10bc92ffbf41@raspberrypi.com Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2025-01-16ice: support FW Recovery ModeKonrad Knitter
Recovery Mode is intended to recover from a fatal failure scenario in which the device is not accessible to the host, meaning the firmware is non-responsive. The purpose of the Firmware Recovery Mode is to enable software tools to update firmware and/or device configuration so the fatal error can be resolved. Recovery Mode Firmware supports a limited set of admin commands required for NVM update. Recovery Firmware does not support hardware interrupts so a polling mode is used. The driver will expose only the minimum set of devlink commands required for the recovery of the adapter. Using an appropriate NVM image, the user can recover the adapter using the devlink flash API. Prior to 4.20 E810 Adapter Recovery Firmware supports only the update and erase of the "fw.mgmt" component. E810 Adapter Recovery Firmware doesn't support selected preservation of cards settings or identifiers. The following command can be used to recover the adapter: $ devlink dev flash <pci-address> <update-image.bin> component fw.mgmt overwrite settings overwrite identifier Newer FW versions (4.20 or newer) supports update of "fw.undi" and "fw.netlist" components. $ devlink dev flash <pci-address> <update-image.bin> Tested on Intel Corporation Ethernet Controller E810-C for SFP FW revision 3.20 and 4.30. Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by: Konrad Knitter <konrad.knitter@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-01-16iommufd/fault: Destroy response and mutex in iommufd_fault_destroy()Nicolin Chen
Both were missing in the initial patch. Fixes: 07838f7fd529 ("iommufd: Add iommufd fault object") Link: https://patch.msgid.link/r/bc8bb13e215af27e62ee51bdba3648dd4ed2dce3.1736923732.git.nicolinc@nvidia.com Cc: stable@vger.kernel.org Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Reviewed-by: Kevin Tian <kevin.tian@intel.com> Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Nicolin Chen <nicolinc@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2025-01-16wifi: brcmfmac: fix NULL pointer dereference in brcmf_txfinalize()Marcel Hamer
On removal of the device or unloading of the kernel module a potential NULL pointer dereference occurs. The following sequence deletes the interface: brcmf_detach() brcmf_remove_interface() brcmf_del_if() Inside the brcmf_del_if() function the drvr->if2bss[ifidx] is updated to BRCMF_BSSIDX_INVALID (-1) if the bsscfgidx matches. After brcmf_remove_interface() call the brcmf_proto_detach() function is called providing the following sequence: brcmf_detach() brcmf_proto_detach() brcmf_proto_msgbuf_detach() brcmf_flowring_detach() brcmf_msgbuf_delete_flowring() brcmf_msgbuf_remove_flowring() brcmf_flowring_delete() brcmf_get_ifp() brcmf_txfinalize() Since brcmf_get_ip() can and actually will return NULL in this case the call to brcmf_txfinalize() will result in a NULL pointer dereference inside brcmf_txfinalize() when trying to update ifp->ndev->stats.tx_errors. This will only happen if a flowring still has an skb. Although the NULL pointer dereference has only been seen when trying to update the tx statistic, all other uses of the ifp pointer have been guarded as well with an early return if ifp is NULL. Cc: stable@vger.kernel.org Signed-off-by: Marcel Hamer <marcel.hamer@windriver.com> Link: https://lore.kernel.org/all/b519e746-ddfd-421f-d897-7620d229e4b2@gmail.com/ Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://patch.msgid.link/20250116132240.731039-1-marcel.hamer@windriver.com
2025-01-16wifi: rtw88: add RTW88_LEDS depends on LEDS_CLASS to KconfigPing-Ke Shih
When using allmodconfig, .config has CONFIG_LEDS_CLASS=m but autoconf.h has CONFIG_LEDS_CLASS_MODULE (additional suffix _MODULE) instead of CONFIG_LEDS_CLASS, which condition CONFIG_LEDS_CLASS in rtw88/led.h can't work properly. Add RTW88_LEDS to Kconfig, and use it as condition to fix this problem. drivers/net/wireless/realtek/rtw88/led.c:19:6: error: redefinition of 'rtw_led_init' 19 | void rtw_led_init(struct rtw_dev *rtwdev) | ^~~~~~~~~~~~ In file included from drivers/net/wireless/realtek/rtw88/led.c:7: drivers/net/wireless/realtek/rtw88/led.h:15:20: note: previous definition of 'rtw_led_init' with type 'void(struct rtw_dev *)' 15 | static inline void rtw_led_init(struct rtw_dev *rtwdev) | ^~~~~~~~~~~~ drivers/net/wireless/realtek/rtw88/led.c:64:6: error: redefinition of 'rtw_led_deinit' 64 | void rtw_led_deinit(struct rtw_dev *rtwdev) | ^~~~~~~~~~~~~~ drivers/net/wireless/realtek/rtw88/led.h:19:20: note: previous definition of 'rtw_led_deinit' with type 'void(struct rtw_dev *)' 19 | static inline void rtw_led_deinit(struct rtw_dev *rtwdev) | ^~~~~~~~~~~~~~ Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Closes: https://lore.kernel.org/linux-wireless/e19a87ad9cd54bfa9907f3a043b25d30@realtek.com/T/#me407832de1040ce22e53517bcb18e322ad0e2260 Fixes: 4b6652bc6d8d ("wifi: rtw88: Add support for LED blinking") Cc: Bitterblue Smith <rtl8821cerfe2@gmail.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://patch.msgid.link/20250116120424.13174-1-pkshih@realtek.com
2025-01-16Merge back earlier cpuidle material for 6.14Rafael J. Wysocki
2025-01-16Merge back earlier cpufreq material for 6.14Rafael J. Wysocki
2025-01-16drm/xe: Mark ComputeCS read mode as UC on iGPUMatthew Brost
RING_CMD_CCTL read index should be UC on iGPU parts due to L3 caching structure. Having this as WB blocks ULLS from being enabled. Change to UC to unblock ULLS on iGPU. v2: - Drop internal communications commnet, bspec is updated Cc: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com> Cc: Michal Mrozek <michal.mrozek@intel.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: José Roberto de Souza <jose.souza@intel.com> Cc: stable@vger.kernel.org Fixes: 328e089bfb37 ("drm/xe: Leverage ComputeCS read L3 caching") Signed-off-by: Matthew Brost <matthew.brost@intel.com> Acked-by: Michal Mrozek <michal.mrozek@intel.com> Reviewed-by: Stuart Summers <stuart.summers@intel.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250114002507.114087-1-matthew.brost@intel.com (cherry picked from commit 758debf35b9cda5450e40996991a6e4b222899bd) Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
2025-01-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR (net-6.13-rc8). Conflicts: drivers/net/ethernet/realtek/r8169_main.c 1f691a1fc4be ("r8169: remove redundant hwmon support") 152d00a91396 ("r8169: simplify setting hwmon attribute visibility") https://lore.kernel.org/20250115122152.760b4e8d@canb.auug.org.au Adjacent changes: drivers/net/ethernet/broadcom/bnxt/bnxt.c 152f4da05aee ("bnxt_en: add support for rx-copybreak ethtool command") f0aa6a37a3db ("eth: bnxt: always recalculate features after XDP clearing, fix null-deref") drivers/net/ethernet/intel/ice/ice_type.h 50327223a8bb ("ice: add lock to protect low latency interface") dc26548d729e ("ice: Fix quad registers read on E825") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-16md/md-linear: Fix a NULL vs IS_ERR() bug in linear_add()Dan Carpenter
The linear_conf() returns error pointers, it doesn't return NULL. Update the error checking to match. Fixes: 127186cfb184 ("md: reintroduce md-linear") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Yu Kuai <yukuai3@huawei.com> Link: https://lore.kernel.org/r/add654be-759f-4b2d-93ba-a3726dae380c@stanley.mountain Signed-off-by: Song Liu <song@kernel.org>
2025-01-16Merge tag 'net-6.13-rc8' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Paolo Abeni: "Notably this includes fixes for a few regressions spotted very recently. No known outstanding ones. Current release - regressions: - core: avoid CFI problems with sock priv helpers - xsk: bring back busy polling support - netpoll: ensure skb_pool list is always initialized Current release - new code bugs: - core: make page_pool_ref_netmem work with net iovs - ipv4: route: fix drop reason being overridden in ip_route_input_slow - udp: make rehash4 independent in udp_lib_rehash() Previous releases - regressions: - bpf: fix bpf_sk_select_reuseport() memory leak - openvswitch: fix lockup on tx to unregistering netdev with carrier - mptcp: be sure to send ack when mptcp-level window re-opens - eth: - bnxt: always recalculate features after XDP clearing, fix null-deref - mlx5: fix sub-function add port error handling - fec: handle page_pool_dev_alloc_pages error Previous releases - always broken: - vsock: some fixes due to transport de-assignment - eth: - ice: fix E825 initialization - mlx5e: fix inversion dependency warning while enabling IPsec tunnel - gtp: destroy device along with udp socket's netns dismantle. - xilinx: axienet: Fix IRQ coalescing packet count overflow" * tag 'net-6.13-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (44 commits) netdev: avoid CFI problems with sock priv helpers net/mlx5e: Always start IPsec sequence number from 1 net/mlx5e: Rely on reqid in IPsec tunnel mode net/mlx5e: Fix inversion dependency warning while enabling IPsec tunnel net/mlx5: Clear port select structure when fail to create net/mlx5: SF, Fix add port error handling net/mlx5: Fix a lockdep warning as part of the write combining test net/mlx5: Fix RDMA TX steering prio net: make page_pool_ref_netmem work with net iovs net: ethernet: xgbe: re-add aneg to supported features in PHY quirks net: pcs: xpcs: actively unset DW_VR_MII_DIG_CTRL1_2G5_EN for 1G SGMII net: pcs: xpcs: fix DW_VR_MII_DIG_CTRL1_2G5_EN bit being set for 1G SGMII w/o inband selftests: net: Adapt ethtool mq tests to fix in qdisc graft net: fec: handle page_pool_dev_alloc_pages error net: netpoll: ensure skb_pool list is always initialized net: xilinx: axienet: Fix IRQ coalescing packet count overflow nfp: bpf: prevent integer overflow in nfp_bpf_event_output() selftests: mptcp: avoid spurious errors on disconnect mptcp: fix spurious wake-up on under memory pressure mptcp: be sure to send ack when mptcp-level window re-opens ...
2025-01-16spi: pxa2xx: Introduce __lpss_ssp_update_priv() helperAndy Shevchenko
In a few places we repeat RMW IO operations on LPSS private registers. Let's introduce a helper to make the code better to read and maintain. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://patch.msgid.link/20250116162109.263081-1-andriy.shevchenko@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2025-01-16Merge tag 'pm-6.13-rc8' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fixes from Rafael Wysocki: "Update the documentation of cpuidle governors that does not match the code any more after previous functional changes (Rafael Wysocki) and fix up the cpufreq Kconfig file broken inadvertently by a previous update (Viresh Kumar)" * tag 'pm-6.13-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: cpufreq: Move endif to the end of Kconfig file cpuidle: teo: Update documentation after previous changes cpuidle: menu: Update documentation after previous changes
2025-01-16Merge tag 'acpi-6.13-rc8' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI fix from Rafael Wysocki: "Prevent acpi_video_device_EDID() from returning a pointer to a memory region that should not be passed to kfree() which causes one of its users to crash randomly on attempts to free it (Chris Bainbridge)" * tag 'acpi-6.13-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI: video: Fix random crashes due to bad kfree()
2025-01-16EDAC/cell: Remove powerpc Cell driverMichael Ellerman
This driver can no longer be built since support for IBM Cell Blades was removed, in particular PPC_CELL_COMMON. Remove the driver. [ bp: Remove EDAC_CELL from Cell's defconfig too. ] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Link: https://lore.kernel.org/r/20241218105523.416573-23-mpe@ellerman.id.au
2025-01-16pmdomain: Merge branch fixes into nextUlf Hansson
Merge the pmdomain fixes for v6.13-rc[n] into the next branch, to allow them to get tested together with the new changes that are targeted for v6.14. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2025-01-16platform/x86: ideapad-laptop: Use devm_platform_profile_register()Kurt Borja
Replace platform_profile_register() with it's device managed version. Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Kurt Borja <kuurtb@gmail.com> Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca> Tested-by: Mark Pearson <mpearson-lenovo@squebb.ca> Link: https://lore.kernel.org/r/20250116002721.75592-12-kuurtb@gmail.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-01-16platform/x86: dell-pc: Use devm_platform_profile_register()Kurt Borja
Replace platform_profile_register() with it's device managed version. Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Kurt Borja <kuurtb@gmail.com> Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca> Tested-by: Mark Pearson <mpearson-lenovo@squebb.ca> Link: https://lore.kernel.org/r/20250116002721.75592-11-kuurtb@gmail.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-01-16platform/x86: asus-wmi: Use devm_platform_profile_register()Kurt Borja
Replace platform_profile_register() with it's device managed version. Also replace pr_err with dev_err in case of error and make the error message more user-friendly. Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Kurt Borja <kuurtb@gmail.com> Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca> Tested-by: Mark Pearson <mpearson-lenovo@squebb.ca> Link: https://lore.kernel.org/r/20250116002721.75592-10-kuurtb@gmail.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-01-16platform/x86: amd: pmf: sps: Use devm_platform_profile_register()Kurt Borja
Replace platform_profile_register() with it's device managed version. Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Kurt Borja <kuurtb@gmail.com> Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca> Tested-by: Mark Pearson <mpearson-lenovo@squebb.ca> Link: https://lore.kernel.org/r/20250116002721.75592-9-kuurtb@gmail.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-01-16platform/x86: acer-wmi: Use devm_platform_profile_register()Kurt Borja
Replace platform_profile_register() with it's device managed version. Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Kurt Borja <kuurtb@gmail.com> Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca> Tested-by: Mark Pearson <mpearson-lenovo@squebb.ca> Link: https://lore.kernel.org/r/20250116002721.75592-8-kuurtb@gmail.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-01-16platform/surface: surface_platform_profile: Use devm_platform_profile_register()Kurt Borja
Replace platform_profile_register() with it's device managed version. Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Kurt Borja <kuurtb@gmail.com> Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca> Tested-by: Mark Pearson <mpearson-lenovo@squebb.ca> Link: https://lore.kernel.org/r/20250116002721.75592-7-kuurtb@gmail.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-01-16ACPI: platform_profile: Add `probe` to platform_profile_opsKurt Borja
Add a `probe` callback to platform_profile_ops, which lets drivers initialize the choices member manually. This is a step towards unexposing the struct platform_profile_handler from the consumer drivers. Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Kurt Borja <kuurtb@gmail.com> Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca> Tested-by: Mark Pearson <mpearson-lenovo@squebb.ca> Link: https://lore.kernel.org/r/20250116002721.75592-6-kuurtb@gmail.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-01-16ACPI: platform_profile: Add `ops` member to handlersKurt Borja
Replace *profile_get and *profile_set members with a general *ops member. Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Kurt Borja <kuurtb@gmail.com> Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca> Tested-by: Mark Pearson <mpearson-lenovo@squebb.ca> Link: https://lore.kernel.org/r/20250116002721.75592-5-kuurtb@gmail.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-01-16ACPI: platform_profile: Remove platform_profile_handler from callbacksKurt Borja
Devices can now set drvdata to the class device, thus passing the platform_profile_handler to callbacks is unnecessary. Instead pass the class device. Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Kurt Borja <kuurtb@gmail.com> Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca> Tested-by: Mark Pearson <mpearson-lenovo@squebb.ca> Link: https://lore.kernel.org/r/20250116002721.75592-4-kuurtb@gmail.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-01-16ACPI: platform_profile: Let drivers set drvdata to the class deviceKurt Borja
Add *drvdata to platform_profile_register() signature and assign it to the class device. While at it, pass specific driver state as drvdata to replace uses of container_of() with dev_get_drvdata(). Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Kurt Borja <kuurtb@gmail.com> Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca> Tested-by: Mark Pearson <mpearson-lenovo@squebb.ca> Link: https://lore.kernel.org/r/20250116002721.75592-3-kuurtb@gmail.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-01-16ACPI: platform_profile: Replace *class_dev member with class_devKurt Borja
Instead of holding a reference to the class device, embed it the platform_profile_handler. This involves manually creating and registering the device and replacing dev_get_drvdata() with the newly created to_pprof_handler() macro. Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Kurt Borja <kuurtb@gmail.com> Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca> Tested-by: Mark Pearson <mpearson-lenovo@squebb.ca> Link: https://lore.kernel.org/r/20250116002721.75592-2-kuurtb@gmail.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-01-16pmdomain: imx8mp-blk-ctrl: add missing loop break conditionXiaolei Wang
Currently imx8mp_blk_ctrl_remove() will continue the for loop until an out-of-bounds exception occurs. pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : dev_pm_domain_detach+0x8/0x48 lr : imx8mp_blk_ctrl_shutdown+0x58/0x90 sp : ffffffc084f8bbf0 x29: ffffffc084f8bbf0 x28: ffffff80daf32ac0 x27: 0000000000000000 x26: ffffffc081658d78 x25: 0000000000000001 x24: ffffffc08201b028 x23: ffffff80d0db9490 x22: ffffffc082340a78 x21: 00000000000005b0 x20: ffffff80d19bc180 x19: 000000000000000a x18: ffffffffffffffff x17: ffffffc080a39e08 x16: ffffffc080a39c98 x15: 4f435f464f006c72 x14: 0000000000000004 x13: ffffff80d0172110 x12: 0000000000000000 x11: ffffff80d0537740 x10: ffffff80d05376c0 x9 : ffffffc0808ed2d8 x8 : ffffffc084f8bab0 x7 : 0000000000000000 x6 : 0000000000000000 x5 : ffffff80d19b9420 x4 : fffffffe03466e60 x3 : 0000000080800077 x2 : 0000000000000000 x1 : 0000000000000001 x0 : 0000000000000000 Call trace: dev_pm_domain_detach+0x8/0x48 platform_shutdown+0x2c/0x48 device_shutdown+0x158/0x268 kernel_restart_prepare+0x40/0x58 kernel_kexec+0x58/0xe8 __do_sys_reboot+0x198/0x258 __arm64_sys_reboot+0x2c/0x40 invoke_syscall+0x5c/0x138 el0_svc_common.constprop.0+0x48/0xf0 do_el0_svc+0x24/0x38 el0_svc+0x38/0xc8 el0t_64_sync_handler+0x120/0x130 el0t_64_sync+0x190/0x198 Code: 8128c2d0 ffffffc0 aa1e03e9 d503201f Fixes: 556f5cf9568a ("soc: imx: add i.MX8MP HSIO blk-ctrl") Cc: stable@vger.kernel.org Signed-off-by: Xiaolei Wang <xiaolei.wang@windriver.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Reviewed-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Frank Li <Frank.Li@nxp.com> Link: https://lore.kernel.org/r/20250115014118.4086729-1-xiaolei.wang@windriver.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2025-01-16pmdomain: airoha: Add Airoha CPU PM Domain supportChristian Marangi
Add Airoha CPU PM Domain support to control frequency and power of CPU present on Airoha EN7581 SoC. Frequency and power can be controlled with the use of the SMC command by passing the performance state. The driver also expose a read-only clock that expose the current CPU frequency with SMC command. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Link: https://lore.kernel.org/r/20250109131313.32317-1-ansuelsmth@gmail.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2025-01-16Merge branch 'pm-cpufreq'Rafael J. Wysocki
Merge a cpufreq fix for 6.13: - Fix cpufreq Kconfig breakage after previous changes (Viresh Kumar). * pm-cpufreq: cpufreq: Move endif to the end of Kconfig file
2025-01-16net/mlx5e: Always start IPsec sequence number from 1Leon Romanovsky
According to RFC4303, section "3.3.3. Sequence Number Generation", the first packet sent using a given SA will contain a sequence number of 1. This is applicable to both ESN and non-ESN mode, which was not covered in commit mentioned in Fixes line. Fixes: 3d42c8cc67a8 ("net/mlx5e: Ensure that IPsec sequence packet number starts from 1") Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-01-16net/mlx5e: Rely on reqid in IPsec tunnel modeLeon Romanovsky
All packet offloads SAs have reqid in it to make sure they have corresponding policy. While it is not strictly needed for transparent mode, it is extremely important in tunnel mode. In that mode, policy and SAs have different match criteria. Policy catches the whole subnet addresses, and SA catches the tunnel gateways addresses. The source address of such tunnel is not known during egress packet traversal in flow steering as it is added only after successful encryption. As reqid is required for packet offload and it is unique for every SA, we can safely rely on it only. The output below shows the configured egress policy and SA by strongswan: [leonro@vm ~]$ sudo ip x s src 192.169.101.2 dst 192.169.101.1 proto esp spi 0xc88b7652 reqid 1 mode tunnel replay-window 0 flag af-unspec esn aead rfc4106(gcm(aes)) 0xe406a01083986e14d116488549094710e9c57bc6 128 anti-replay esn context: seq-hi 0x0, seq 0x0, oseq-hi 0x0, oseq 0x0 replay_window 1, bitmap-length 1 00000000 crypto offload parameters: dev eth2 dir out mode packet [leonro@064 ~]$ sudo ip x p src 192.170.0.0/16 dst 192.170.0.0/16 dir out priority 383615 ptype main tmpl src 192.169.101.2 dst 192.169.101.1 proto esp spi 0xc88b7652 reqid 1 mode tunnel crypto offload parameters: dev eth2 mode packet Fixes: b3beba1fb404 ("net/mlx5e: Allow policies with reqid 0, to support IKE policy holes") Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-01-16net/mlx5e: Fix inversion dependency warning while enabling IPsec tunnelLeon Romanovsky
Attempt to enable IPsec packet offload in tunnel mode in debug kernel generates the following kernel panic, which is happening due to two issues: 1. In SA add section, the should be _bh() variant when marking SA mode. 2. There is not needed flush_workqueue in SA delete routine. It is not needed as at this stage as it is removed from SADB and the running work will be canceled later in SA free. ===================================================== WARNING: SOFTIRQ-safe -> SOFTIRQ-unsafe lock order detected 6.12.0+ #4 Not tainted ----------------------------------------------------- charon/1337 [HC0[0]:SC0[4]:HE1:SE0] is trying to acquire: ffff88810f365020 (&xa->xa_lock#24){+.+.}-{3:3}, at: mlx5e_xfrm_del_state+0xca/0x1e0 [mlx5_core] and this task is already holding: ffff88813e0f0d48 (&x->lock){+.-.}-{3:3}, at: xfrm_state_delete+0x16/0x30 which would create a new lock dependency: (&x->lock){+.-.}-{3:3} -> (&xa->xa_lock#24){+.+.}-{3:3} but this new dependency connects a SOFTIRQ-irq-safe lock: (&x->lock){+.-.}-{3:3} ... which became SOFTIRQ-irq-safe at: lock_acquire+0x1be/0x520 _raw_spin_lock_bh+0x34/0x40 xfrm_timer_handler+0x91/0xd70 __hrtimer_run_queues+0x1dd/0xa60 hrtimer_run_softirq+0x146/0x2e0 handle_softirqs+0x266/0x860 irq_exit_rcu+0x115/0x1a0 sysvec_apic_timer_interrupt+0x6e/0x90 asm_sysvec_apic_timer_interrupt+0x16/0x20 default_idle+0x13/0x20 default_idle_call+0x67/0xa0 do_idle+0x2da/0x320 cpu_startup_entry+0x50/0x60 start_secondary+0x213/0x2a0 common_startup_64+0x129/0x138 to a SOFTIRQ-irq-unsafe lock: (&xa->xa_lock#24){+.+.}-{3:3} ... which became SOFTIRQ-irq-unsafe at: ... lock_acquire+0x1be/0x520 _raw_spin_lock+0x2c/0x40 xa_set_mark+0x70/0x110 mlx5e_xfrm_add_state+0xe48/0x2290 [mlx5_core] xfrm_dev_state_add+0x3bb/0xd70 xfrm_add_sa+0x2451/0x4a90 xfrm_user_rcv_msg+0x493/0x880 netlink_rcv_skb+0x12e/0x380 xfrm_netlink_rcv+0x6d/0x90 netlink_unicast+0x42f/0x740 netlink_sendmsg+0x745/0xbe0 __sock_sendmsg+0xc5/0x190 __sys_sendto+0x1fe/0x2c0 __x64_sys_sendto+0xdc/0x1b0 do_syscall_64+0x6d/0x140 entry_SYSCALL_64_after_hwframe+0x4b/0x53 other info that might help us debug this: Possible interrupt unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&xa->xa_lock#24); local_irq_disable(); lock(&x->lock); lock(&xa->xa_lock#24); <Interrupt> lock(&x->lock); *** DEADLOCK *** 2 locks held by charon/1337: #0: ffffffff87f8f858 (&net->xfrm.xfrm_cfg_mutex){+.+.}-{4:4}, at: xfrm_netlink_rcv+0x5e/0x90 #1: ffff88813e0f0d48 (&x->lock){+.-.}-{3:3}, at: xfrm_state_delete+0x16/0x30 the dependencies between SOFTIRQ-irq-safe lock and the holding lock: -> (&x->lock){+.-.}-{3:3} ops: 29 { HARDIRQ-ON-W at: lock_acquire+0x1be/0x520 _raw_spin_lock_bh+0x34/0x40 xfrm_alloc_spi+0xc0/0xe60 xfrm_alloc_userspi+0x5f6/0xbc0 xfrm_user_rcv_msg+0x493/0x880 netlink_rcv_skb+0x12e/0x380 xfrm_netlink_rcv+0x6d/0x90 netlink_unicast+0x42f/0x740 netlink_sendmsg+0x745/0xbe0 __sock_sendmsg+0xc5/0x190 __sys_sendto+0x1fe/0x2c0 __x64_sys_sendto+0xdc/0x1b0 do_syscall_64+0x6d/0x140 entry_SYSCALL_64_after_hwframe+0x4b/0x53 IN-SOFTIRQ-W at: lock_acquire+0x1be/0x520 _raw_spin_lock_bh+0x34/0x40 xfrm_timer_handler+0x91/0xd70 __hrtimer_run_queues+0x1dd/0xa60 hrtimer_run_softirq+0x146/0x2e0 handle_softirqs+0x266/0x860 irq_exit_rcu+0x115/0x1a0 sysvec_apic_timer_interrupt+0x6e/0x90 asm_sysvec_apic_timer_interrupt+0x16/0x20 default_idle+0x13/0x20 default_idle_call+0x67/0xa0 do_idle+0x2da/0x320 cpu_startup_entry+0x50/0x60 start_secondary+0x213/0x2a0 common_startup_64+0x129/0x138 INITIAL USE at: lock_acquire+0x1be/0x520 _raw_spin_lock_bh+0x34/0x40 xfrm_alloc_spi+0xc0/0xe60 xfrm_alloc_userspi+0x5f6/0xbc0 xfrm_user_rcv_msg+0x493/0x880 netlink_rcv_skb+0x12e/0x380 xfrm_netlink_rcv+0x6d/0x90 netlink_unicast+0x42f/0x740 netlink_sendmsg+0x745/0xbe0 __sock_sendmsg+0xc5/0x190 __sys_sendto+0x1fe/0x2c0 __x64_sys_sendto+0xdc/0x1b0 do_syscall_64+0x6d/0x140 entry_SYSCALL_64_after_hwframe+0x4b/0x53 } ... key at: [<ffffffff87f9cd20>] __key.18+0x0/0x40 the dependencies between the lock to be acquired and SOFTIRQ-irq-unsafe lock: -> (&xa->xa_lock#24){+.+.}-{3:3} ops: 9 { HARDIRQ-ON-W at: lock_acquire+0x1be/0x520 _raw_spin_lock_bh+0x34/0x40 mlx5e_xfrm_add_state+0xc5b/0x2290 [mlx5_core] xfrm_dev_state_add+0x3bb/0xd70 xfrm_add_sa+0x2451/0x4a90 xfrm_user_rcv_msg+0x493/0x880 netlink_rcv_skb+0x12e/0x380 xfrm_netlink_rcv+0x6d/0x90 netlink_unicast+0x42f/0x740 netlink_sendmsg+0x745/0xbe0 __sock_sendmsg+0xc5/0x190 __sys_sendto+0x1fe/0x2c0 __x64_sys_sendto+0xdc/0x1b0 do_syscall_64+0x6d/0x140 entry_SYSCALL_64_after_hwframe+0x4b/0x53 SOFTIRQ-ON-W at: lock_acquire+0x1be/0x520 _raw_spin_lock+0x2c/0x40 xa_set_mark+0x70/0x110 mlx5e_xfrm_add_state+0xe48/0x2290 [mlx5_core] xfrm_dev_state_add+0x3bb/0xd70 xfrm_add_sa+0x2451/0x4a90 xfrm_user_rcv_msg+0x493/0x880 netlink_rcv_skb+0x12e/0x380 xfrm_netlink_rcv+0x6d/0x90 netlink_unicast+0x42f/0x740 netlink_sendmsg+0x745/0xbe0 __sock_sendmsg+0xc5/0x190 __sys_sendto+0x1fe/0x2c0 __x64_sys_sendto+0xdc/0x1b0 do_syscall_64+0x6d/0x140 entry_SYSCALL_64_after_hwframe+0x4b/0x53 INITIAL USE at: lock_acquire+0x1be/0x520 _raw_spin_lock_bh+0x34/0x40 mlx5e_xfrm_add_state+0xc5b/0x2290 [mlx5_core] xfrm_dev_state_add+0x3bb/0xd70 xfrm_add_sa+0x2451/0x4a90 xfrm_user_rcv_msg+0x493/0x880 netlink_rcv_skb+0x12e/0x380 xfrm_netlink_rcv+0x6d/0x90 netlink_unicast+0x42f/0x740 netlink_sendmsg+0x745/0xbe0 __sock_sendmsg+0xc5/0x190 __sys_sendto+0x1fe/0x2c0 __x64_sys_sendto+0xdc/0x1b0 do_syscall_64+0x6d/0x140 entry_SYSCALL_64_after_hwframe+0x4b/0x53 } ... key at: [<ffffffffa078ff60>] __key.48+0x0/0xfffffffffff210a0 [mlx5_core] ... acquired at: __lock_acquire+0x30a0/0x5040 lock_acquire+0x1be/0x520 _raw_spin_lock_bh+0x34/0x40 mlx5e_xfrm_del_state+0xca/0x1e0 [mlx5_core] xfrm_dev_state_delete+0x90/0x160 __xfrm_state_delete+0x662/0xae0 xfrm_state_delete+0x1e/0x30 xfrm_del_sa+0x1c2/0x340 xfrm_user_rcv_msg+0x493/0x880 netlink_rcv_skb+0x12e/0x380 xfrm_netlink_rcv+0x6d/0x90 netlink_unicast+0x42f/0x740 netlink_sendmsg+0x745/0xbe0 __sock_sendmsg+0xc5/0x190 __sys_sendto+0x1fe/0x2c0 __x64_sys_sendto+0xdc/0x1b0 do_syscall_64+0x6d/0x140 entry_SYSCALL_64_after_hwframe+0x4b/0x53 stack backtrace: CPU: 7 UID: 0 PID: 1337 Comm: charon Not tainted 6.12.0+ #4 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x74/0xd0 check_irq_usage+0x12e8/0x1d90 ? print_shortest_lock_dependencies_backwards+0x1b0/0x1b0 ? check_chain_key+0x1bb/0x4c0 ? __lockdep_reset_lock+0x180/0x180 ? check_path.constprop.0+0x24/0x50 ? mark_lock+0x108/0x2fb0 ? print_circular_bug+0x9b0/0x9b0 ? mark_lock+0x108/0x2fb0 ? print_usage_bug.part.0+0x670/0x670 ? check_prev_add+0x1c4/0x2310 check_prev_add+0x1c4/0x2310 __lock_acquire+0x30a0/0x5040 ? lockdep_set_lock_cmp_fn+0x190/0x190 ? lockdep_set_lock_cmp_fn+0x190/0x190 lock_acquire+0x1be/0x520 ? mlx5e_xfrm_del_state+0xca/0x1e0 [mlx5_core] ? lockdep_hardirqs_on_prepare+0x400/0x400 ? __xfrm_state_delete+0x5f0/0xae0 ? lock_downgrade+0x6b0/0x6b0 _raw_spin_lock_bh+0x34/0x40 ? mlx5e_xfrm_del_state+0xca/0x1e0 [mlx5_core] mlx5e_xfrm_del_state+0xca/0x1e0 [mlx5_core] xfrm_dev_state_delete+0x90/0x160 __xfrm_state_delete+0x662/0xae0 xfrm_state_delete+0x1e/0x30 xfrm_del_sa+0x1c2/0x340 ? xfrm_get_sa+0x250/0x250 ? check_chain_key+0x1bb/0x4c0 xfrm_user_rcv_msg+0x493/0x880 ? copy_sec_ctx+0x270/0x270 ? check_chain_key+0x1bb/0x4c0 ? lockdep_set_lock_cmp_fn+0x190/0x190 ? lockdep_set_lock_cmp_fn+0x190/0x190 netlink_rcv_skb+0x12e/0x380 ? copy_sec_ctx+0x270/0x270 ? netlink_ack+0xd90/0xd90 ? netlink_deliver_tap+0xcd/0xb60 xfrm_netlink_rcv+0x6d/0x90 netlink_unicast+0x42f/0x740 ? netlink_attachskb+0x730/0x730 ? lock_acquire+0x1be/0x520 netlink_sendmsg+0x745/0xbe0 ? netlink_unicast+0x740/0x740 ? __might_fault+0xbb/0x170 ? netlink_unicast+0x740/0x740 __sock_sendmsg+0xc5/0x190 ? fdget+0x163/0x1d0 __sys_sendto+0x1fe/0x2c0 ? __x64_sys_getpeername+0xb0/0xb0 ? do_user_addr_fault+0x856/0xe30 ? lock_acquire+0x1be/0x520 ? __task_pid_nr_ns+0x117/0x410 ? lock_downgrade+0x6b0/0x6b0 __x64_sys_sendto+0xdc/0x1b0 ? lockdep_hardirqs_on_prepare+0x284/0x400 do_syscall_64+0x6d/0x140 entry_SYSCALL_64_after_hwframe+0x4b/0x53 RIP: 0033:0x7f7d31291ba4 Code: 7d e8 89 4d d4 e8 4c 42 f7 ff 44 8b 4d d0 4c 8b 45 c8 89 c3 44 8b 55 d4 8b 7d e8 b8 2c 00 00 00 48 8b 55 d8 48 8b 75 e0 0f 05 <48> 3d 00 f0 ff ff 77 34 89 df 48 89 45 e8 e8 99 42 f7 ff 48 8b 45 RSP: 002b:00007f7d2ccd94f0 EFLAGS: 00000297 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 0000000000000001 RCX: 00007f7d31291ba4 RDX: 0000000000000028 RSI: 00007f7d2ccd96a0 RDI: 000000000000000a RBP: 00007f7d2ccd9530 R08: 00007f7d2ccd9598 R09: 000000000000000c R10: 0000000000000000 R11: 0000000000000297 R12: 0000000000000028 R13: 00007f7d2ccd9598 R14: 00007f7d2ccd96a0 R15: 00000000000000e1 </TASK> Fixes: 4c24272b4e2b ("net/mlx5e: Listen to ARP events to update IPsec L2 headers in tunnel mode") Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-01-16net/mlx5: Clear port select structure when fail to createMark Zhang
Clear the port select structure on error so no stale values left after definers are destroyed. That's because the mlx5_lag_destroy_definers() always try to destroy all lag definers in the tt_map, so in the flow below lag definers get double-destroyed and cause kernel crash: mlx5_lag_port_sel_create() mlx5_lag_create_definers() mlx5_lag_create_definer() <- Failed on tt 1 mlx5_lag_destroy_definers() <- definers[tt=0] gets destroyed mlx5_lag_port_sel_create() mlx5_lag_create_definers() mlx5_lag_create_definer() <- Failed on tt 0 mlx5_lag_destroy_definers() <- definers[tt=0] gets double-destroyed Unable to handle kernel NULL pointer dereference at virtual address 0000000000000008 Mem abort info: ESR = 0x0000000096000005 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x05: level 1 translation fault Data abort info: ISV = 0, ISS = 0x00000005, ISS2 = 0x00000000 CM = 0, WnR = 0, TnD = 0, TagAccess = 0 GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 user pgtable: 64k pages, 48-bit VAs, pgdp=0000000112ce2e00 [0000000000000008] pgd=0000000000000000, p4d=0000000000000000, pud=0000000000000000 Internal error: Oops: 0000000096000005 [#1] PREEMPT SMP Modules linked in: iptable_raw bonding ip_gre ip6_gre gre ip6_tunnel tunnel6 geneve ip6_udp_tunnel udp_tunnel ipip tunnel4 ip_tunnel rdma_ucm(OE) rdma_cm(OE) iw_cm(OE) ib_ipoib(OE) ib_cm(OE) ib_umad(OE) mlx5_ib(OE) ib_uverbs(OE) mlx5_fwctl(OE) fwctl(OE) mlx5_core(OE) mlxdevm(OE) ib_core(OE) mlxfw(OE) memtrack(OE) mlx_compat(OE) openvswitch nsh nf_conncount psample xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink xfrm_user xfrm_algo xt_addrtype iptable_filter iptable_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 br_netfilter bridge stp llc netconsole overlay efi_pstore sch_fq_codel zram ip_tables crct10dif_ce qemu_fw_cfg fuse ipv6 crc_ccitt [last unloaded: mlx_compat(OE)] CPU: 3 UID: 0 PID: 217 Comm: kworker/u53:2 Tainted: G OE 6.11.0+ #2 Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODULE Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015 Workqueue: mlx5_lag mlx5_do_bond_work [mlx5_core] pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : mlx5_del_flow_rules+0x24/0x2c0 [mlx5_core] lr : mlx5_lag_destroy_definer+0x54/0x100 [mlx5_core] sp : ffff800085fafb00 x29: ffff800085fafb00 x28: ffff0000da0c8000 x27: 0000000000000000 x26: ffff0000da0c8000 x25: ffff0000da0c8000 x24: ffff0000da0c8000 x23: ffff0000c31f81a0 x22: 0400000000000000 x21: ffff0000da0c8000 x20: 0000000000000000 x19: 0000000000000001 x18: 0000000000000000 x17: 0000000000000000 x16: 0000000000000000 x15: 0000ffff8b0c9350 x14: 0000000000000000 x13: ffff800081390d18 x12: ffff800081dc3cc0 x11: 0000000000000001 x10: 0000000000000b10 x9 : ffff80007ab7304c x8 : ffff0000d00711f0 x7 : 0000000000000004 x6 : 0000000000000190 x5 : ffff00027edb3010 x4 : 0000000000000000 x3 : 0000000000000000 x2 : ffff0000d39b8000 x1 : ffff0000d39b8000 x0 : 0400000000000000 Call trace: mlx5_del_flow_rules+0x24/0x2c0 [mlx5_core] mlx5_lag_destroy_definer+0x54/0x100 [mlx5_core] mlx5_lag_destroy_definers+0xa0/0x108 [mlx5_core] mlx5_lag_port_sel_create+0x2d4/0x6f8 [mlx5_core] mlx5_activate_lag+0x60c/0x6f8 [mlx5_core] mlx5_do_bond_work+0x284/0x5c8 [mlx5_core] process_one_work+0x170/0x3e0 worker_thread+0x2d8/0x3e0 kthread+0x11c/0x128 ret_from_fork+0x10/0x20 Code: a9025bf5 aa0003f6 a90363f7 f90023f9 (f9400400) ---[ end trace 0000000000000000 ]--- Fixes: dc48516ec7d3 ("net/mlx5: Lag, add support to create definers for LAG") Signed-off-by: Mark Zhang <markzhang@nvidia.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Reviewed-by: Mark Bloch <mbloch@nvidia.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-01-16net/mlx5: SF, Fix add port error handlingChris Mi
If failed to add SF, error handling doesn't delete the SF from the SF table. But the hw resources are deleted. So when unload driver, hw resources will be deleted again. Firmware will report syndrome 0x68def3 which means "SF is not allocated can not deallocate". Fix it by delete SF from SF table if failed to add SF. Fixes: 2597ee190b4e ("net/mlx5: Call mlx5_sf_id_erase() once in mlx5_sf_dealloc()") Signed-off-by: Chris Mi <cmi@nvidia.com> Reviewed-by: Shay Drori <shayd@nvidia.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-01-16net/mlx5: Fix a lockdep warning as part of the write combining testYishai Hadas
Fix a lockdep warning [1] observed during the write combining test. The warning indicates a potential nested lock scenario that could lead to a deadlock. However, this is a false positive alarm because the SF lock and its parent lock are distinct ones. The lockdep confusion arises because the locks belong to the same object class (i.e., struct mlx5_core_dev). To resolve this, the code has been refactored to avoid taking both locks. Instead, only the parent lock is acquired. [1] raw_ethernet_bw/2118 is trying to acquire lock: [ 213.619032] ffff88811dd75e08 (&dev->wc_state_lock){+.+.}-{3:3}, at: mlx5_wc_support_get+0x18c/0x210 [mlx5_core] [ 213.620270] [ 213.620270] but task is already holding lock: [ 213.620943] ffff88810b585e08 (&dev->wc_state_lock){+.+.}-{3:3}, at: mlx5_wc_support_get+0x10c/0x210 [mlx5_core] [ 213.622045] [ 213.622045] other info that might help us debug this: [ 213.622778] Possible unsafe locking scenario: [ 213.622778] [ 213.623465] CPU0 [ 213.623815] ---- [ 213.624148] lock(&dev->wc_state_lock); [ 213.624615] lock(&dev->wc_state_lock); [ 213.625071] [ 213.625071] *** DEADLOCK *** [ 213.625071] [ 213.625805] May be due to missing lock nesting notation [ 213.625805] [ 213.626522] 4 locks held by raw_ethernet_bw/2118: [ 213.627019] #0: ffff88813f80d578 (&uverbs_dev->disassociate_srcu){.+.+}-{0:0}, at: ib_uverbs_ioctl+0xc4/0x170 [ib_uverbs] [ 213.628088] #1: ffff88810fb23930 (&file->hw_destroy_rwsem){.+.+}-{3:3}, at: ib_init_ucontext+0x2d/0xf0 [ib_uverbs] [ 213.629094] #2: ffff88810fb23878 (&file->ucontext_lock){+.+.}-{3:3}, at: ib_init_ucontext+0x49/0xf0 [ib_uverbs] [ 213.630106] #3: ffff88810b585e08 (&dev->wc_state_lock){+.+.}-{3:3}, at: mlx5_wc_support_get+0x10c/0x210 [mlx5_core] [ 213.631185] [ 213.631185] stack backtrace: [ 213.631718] CPU: 1 UID: 0 PID: 2118 Comm: raw_ethernet_bw Not tainted 6.12.0-rc7_internal_net_next_mlx5_89a0ad0 #1 [ 213.632722] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 [ 213.633785] Call Trace: [ 213.634099] [ 213.634393] dump_stack_lvl+0x7e/0xc0 [ 213.634806] print_deadlock_bug+0x278/0x3c0 [ 213.635265] __lock_acquire+0x15f4/0x2c40 [ 213.635712] lock_acquire+0xcd/0x2d0 [ 213.636120] ? mlx5_wc_support_get+0x18c/0x210 [mlx5_core] [ 213.636722] ? mlx5_ib_enable_lb+0x24/0xa0 [mlx5_ib] [ 213.637277] __mutex_lock+0x81/0xda0 [ 213.637697] ? mlx5_wc_support_get+0x18c/0x210 [mlx5_core] [ 213.638305] ? mlx5_wc_support_get+0x18c/0x210 [mlx5_core] [ 213.638902] ? rcu_read_lock_sched_held+0x3f/0x70 [ 213.639400] ? mlx5_wc_support_get+0x18c/0x210 [mlx5_core] [ 213.640016] mlx5_wc_support_get+0x18c/0x210 [mlx5_core] [ 213.640615] set_ucontext_resp+0x68/0x2b0 [mlx5_ib] [ 213.641144] ? debug_mutex_init+0x33/0x40 [ 213.641586] mlx5_ib_alloc_ucontext+0x18e/0x7b0 [mlx5_ib] [ 213.642145] ib_init_ucontext+0xa0/0xf0 [ib_uverbs] [ 213.642679] ib_uverbs_handler_UVERBS_METHOD_GET_CONTEXT+0x95/0xc0 [ib_uverbs] [ 213.643426] ? _copy_from_user+0x46/0x80 [ 213.643878] ib_uverbs_cmd_verbs+0xa6b/0xc80 [ib_uverbs] [ 213.644426] ? ib_uverbs_handler_UVERBS_METHOD_INVOKE_WRITE+0x130/0x130 [ib_uverbs] [ 213.645213] ? __lock_acquire+0xa99/0x2c40 [ 213.645675] ? lock_acquire+0xcd/0x2d0 [ 213.646101] ? ib_uverbs_ioctl+0xc4/0x170 [ib_uverbs] [ 213.646625] ? reacquire_held_locks+0xcf/0x1f0 [ 213.647102] ? do_user_addr_fault+0x45d/0x770 [ 213.647586] ib_uverbs_ioctl+0xe0/0x170 [ib_uverbs] [ 213.648102] ? ib_uverbs_ioctl+0xc4/0x170 [ib_uverbs] [ 213.648632] __x64_sys_ioctl+0x4d3/0xaa0 [ 213.649060] ? do_user_addr_fault+0x4a8/0x770 [ 213.649528] do_syscall_64+0x6d/0x140 [ 213.649947] entry_SYSCALL_64_after_hwframe+0x4b/0x53 [ 213.650478] RIP: 0033:0x7fa179b0737b [ 213.650893] Code: ff ff ff 85 c0 79 9b 49 c7 c4 ff ff ff ff 5b 5d 4c 89 e0 41 5c c3 66 0f 1f 84 00 00 00 00 00 f3 0f 1e fa b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 7d 2a 0f 00 f7 d8 64 89 01 48 [ 213.652619] RSP: 002b:00007ffd2e6d46e8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 [ 213.653390] RAX: ffffffffffffffda RBX: 00007ffd2e6d47f8 RCX: 00007fa179b0737b [ 213.654084] RDX: 00007ffd2e6d47e0 RSI: 00000000c0181b01 RDI: 0000000000000003 [ 213.654767] RBP: 00007ffd2e6d47c0 R08: 00007fa1799be010 R09: 0000000000000002 [ 213.655453] R10: 00007ffd2e6d4960 R11: 0000000000000246 R12: 00007ffd2e6d487c [ 213.656170] R13: 0000000000000027 R14: 0000000000000001 R15: 00007ffd2e6d4f70 Fixes: d98995b4bf98 ("net/mlx5: Reimplement write combining test") Signed-off-by: Yishai Hadas <yishaih@nvidia.com> Reviewed-by: Michael Guralnik <michaelgur@nvidia.com> Reviewed-by: Larysa Zaremba <larysa.zaremba@intel.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-01-16net/mlx5: Fix RDMA TX steering prioPatrisious Haddad
User added steering rules at RDMA_TX were being added to the first prio, which is the counters prio. Fix that so that they are correctly added to the BYPASS_PRIO instead. Fixes: 24670b1a3166 ("net/mlx5: Add support for RDMA TX steering") Signed-off-by: Patrisious Haddad <phaddad@nvidia.com> Reviewed-by: Mark Bloch <mbloch@nvidia.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-01-16net: stmmac: Convert prefetch() to net_prefetch() for received framesFurong Xu
The size of DMA descriptors is 32 bytes at most. net_prefetch() for received frames, and keep prefetch() for descriptors. This patch brings ~4.8% driver performance improvement in a TCP RX throughput test with iPerf tool on a single isolated Cortex-A65 CPU core, 2.92 Gbits/sec increased to 3.06 Gbits/sec. Suggested-by: Joe Damato <jdamato@fastly.com> Signed-off-by: Furong Xu <0x1207@gmail.com> Reviewed-by: Yanteng Si <si.yanteng@linux.dev> Reviewed-by: Larysa Zaremba <larysa.zaremba@intel.com> Reviewed-by: Joe Damato <jdamato@fastly.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
generated by cgit (git 2.34.1) at 2025-09-11 21:17:35 +0000