| Age | Commit message (Collapse) | Author |
|---|
|
refill the ucode bo during psp resume for SRIOV, otherwise ucode load
will fail after VM hibernation and fb clean.
Signed-off-by: Victor Zhao <Victor.Zhao@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Enable the cleaner shader for GFX10.3.2/10.3.4/10.3.5 GPUs to provide
data isolation between GPU workloads. The cleaner shader is responsible
for clearing the Local Data Store (LDS), Vector General Purpose
Registers (VGPRs), and Scalar General Purpose Registers (SGPRs), which
helps prevent data leakage and ensures accurate computation results.
This update extends cleaner shader support to GFX10.3.2/10.3.4/10.3.5
GPUs, previously available for GFX10.3.0. It enhances security by
clearing GPU memory between processes and maintains a consistent GPU
state across KGD and KFD workloads.
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Per queue reset should be bypassed when gpu recovery is disabled
with module parameter.
Fixes: ee0a469cf917 ("drm/amdkfd: support per-queue reset on gfx9")
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The adev->ip_blocks array is not indexed by AMD_IP_BLOCK_TYPE_xxx,
instead we should call amdgpu_device_ip_get_ip_block() to get the
corresponding IP block oject.
Fix some checkpatch issues (Alex)
Signed-off-by: Jiang Liu <gerry@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Tear down ttm range manager for doorbell in function amdgpu_ttm_fini(),
to avoid memory leakage.
Fixes: 792b84fb9038 ("drm/amdgpu: initialize ttm for doorbells")
Signed-off-by: Jiang Liu <gerry@linux.alibaba.com>
Signed-off-by: Kent Russell <kent.russell@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The RB bitmap should be global active RB bitmap &
active RB bitmap based on active SA.
Signed-off-by: Tim Huang <tim.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The RB bitmap width per SA may be 0x1 for some ASICs.
Use the actual bitmap of SA instead of 0x3 to determine
the active RB bitmap.
Signed-off-by: Tim Huang <tim.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
gfx12 derivatives will have substantially different trap handler
implementations from gfx10/gfx11. Add a separate source file for
gfx12+ and remove unneeded conditional code.
No functional change.
v2: Revert copyright date to 2018, minor comment fixes
Signed-off-by: Jay Cornwall <jay.cornwall@amd.com>
Reviewed-by: Lancelot Six <lancelot.six@amd.com>
Cc: Jonathan Kim <jonathan.kim@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The "mask" and "val" variables are type u64. The problem is that the
BIT() macros are type unsigned long which is just 32 bits on 32bit
systems.
It's unlikely that people will be using this driver on 32bit kernels
and even if they did we only use the lower AMDGPU_MAX_SDMA_INSTANCES (16)
bits. So this bug does not affect anything in real life.
Still, for correctness sake, u64 bit masks should use BIT_ULL().
Fixes: d2e3961ae371 ("drm/amdgpu: add amdgpu_sdma_sched_mask debugfs")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/d39a9325-87a4-4543-b6ec-1c61fca3a6fc@stanley.mountain
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Enable the kgq and kcq queue reset flag
Signed-off-by: Jesse Zhang <jesse.zhang@amd.com>
Reviewed-by: Tim Huang <tim.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
testing with clang
Commit 24909d9ec7c3 ("drm/amd/display: Overwriting dualDPP UBF values
before usage") added a new warning in dml2/display_mode_core.c when
building allmodconfig with clang:
drivers/gpu/drm/amd/amdgpu/../display/dc/dml2/display_mode_core.c:6268:13: error: stack frame size (3128) exceeds limit (3072) in 'dml_prefetch_check' [-Werror,-Wframe-larger-than]
6268 | static void dml_prefetch_check(struct display_mode_lib_st *mode_lib)
| ^
Commit be4e3509314a ("drm/amd/display: DML21 Reintegration For Various
Fixes") introduced one in dml2_core/dml2_core_dcn4_calcs.c with the same
configuration:
drivers/gpu/drm/amd/amdgpu/../display/dc/dml2/dml21/src/dml2_core/dml2_core_dcn4_calcs.c:7236:13: error: stack frame size (3256) exceeds limit (3072) in 'dml_core_mode_support' [-Werror,-Wframe-larger-than]
7236 | static bool dml_core_mode_support(struct dml2_core_calcs_mode_support_ex *in_out_params)
| ^
In the case of the first warning, the stack usage was already at the
limit at the parent change, so the offending change was rather
innocuous. In the case of the second warning, there was a rather
dramatic increase in stack usage compared to the parent:
drivers/gpu/drm/amd/amdgpu/../display/dc/dml2/dml21/src/dml2_core/dml2_core_dcn4_calcs.c:7032:13: error: stack frame size (2696) exceeds limit (2048) in 'dml_core_mode_support' [-Werror,-Wframe-larger-than]
7032 | static bool dml_core_mode_support(struct dml2_core_calcs_mode_support_ex *in_out_params)
| ^
This is an unfortunate interaction between an issue with stack slot
reuse in LLVM that gets exacerbated by sanitization (which gets enabled
with all{mod,yes}config) and function calls using a much higher number
of parameters than is typical in the kernel, necessitating passing most
of these values on the stack.
While it is possible that there should be source code changes to address
these warnings, this code is difficult to modify for various reasons, as
has been noted in other changes that have occurred for similar reasons,
such as commit 6740ec97bcdb ("drm/amd/display: Increase frame warning
limit with KASAN or KCSAN in dml2").
Increase the frame larger than limit when compile testing with clang and
the sanitizers enabled to avoid this breakage in all{mod,yes}config, as
they are commonly used and valuable testing targets. While it is not the
best to hide this issue, it is not really relevant when compile testing,
as the sanitizers are commonly stressful on optimizations and they are
only truly useful at runtime, which COMPILE_TEST states will not occur
with the current build.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202412121748.chuX4sap-lkp@intel.com/
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Implement sdma queue reset by SMU_MSG_ResetSDMA2
Signed-off-by: Jesse Zhang <jesse.zhang@amd.com>
Suggested-by: Tim Huang <tim.huang@amd.com>
Reviewed-by: Tim Huang <tim.huang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
add the PPSMC_MSG_ResetSDMA2 definition for smu 13.0.6
Signed-off-by: Jesse Zhang <jesse.zhang@amd.com>
Reviewed-by: Tim Huang <tim.huang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Remove apu check in sdma queue reset.
Signed-off-by: Jesse Zhang <jesse.zhang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The power trip points maintained in local should not be updated when '_PTP'
method fails to evaluate.
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Link: https://lore.kernel.org/r/20250109081708.27366-3-lihuisong@huawei.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
The 'power1_alarm' attribute uses the 'power' and 'cap' in the
acpi_power_meter_resource structure. Currently, these two fields are just
updated when user query 'power' and 'cap' attribute. If user directly query
the 'power1_alarm' attribute without queryng above two attributes, driver
will use uninitialized variables to judge.
So this patch adds the setting of alarm state and update 'cap' in the
notification callback and update 'power' and 'cap' if needed to show the
real alarm state.
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Link: https://lore.kernel.org/r/20250109081708.27366-2-lihuisong@huawei.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
devm_hwmon_device_register_with_info
A number of network PHY drivers use the following code:
name = devm_hwmon_sanitize_name(dev, dev_name(dev));
if (IS_ERR(name))
return PTR_ERR(name);
devm_hwmon_device_register_with_info(dev, name, ..);
Make this a generic fallback option and use the device name if no name
is provided to devm_hwmon_device_register_with_info(). This would allow
to simplify the affected drivers.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/1ebe6961-6445-4408-bfb4-b56173af9db5@gmail.com
[groeck: Update API document]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from netfilter, Bluetooth and WPAN.
No outstanding fixes / investigations at this time.
Current release - new code bugs:
- eth: fbnic: revert HWMON support, it doesn't work at all and revert
is similar size as the fixes
Previous releases - regressions:
- tcp: allow a connection when sk_max_ack_backlog is zero
- tls: fix tls_sw_sendmsg error handling
Previous releases - always broken:
- netdev netlink family:
- prevent accessing NAPI instances from another namespace
- don't dump Tx and uninitialized NAPIs
- net: sysctl: avoid using current->nsproxy, fix null-deref if task
is exiting and stick to opener's netns
- sched: sch_cake: add bounds checks to host bulk flow fairness
counts
Misc:
- annual cleanup of inactive maintainers"
* tag 'net-6.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (57 commits)
rds: sysctl: rds_tcp_{rcv,snd}buf: avoid using current->nsproxy
sctp: sysctl: plpmtud_probe_interval: avoid using current->nsproxy
sctp: sysctl: udp_port: avoid using current->nsproxy
sctp: sysctl: auth_enable: avoid using current->nsproxy
sctp: sysctl: rto_min/max: avoid using current->nsproxy
sctp: sysctl: cookie_hmac_alg: avoid using current->nsproxy
mptcp: sysctl: blackhole timeout: avoid using current->nsproxy
mptcp: sysctl: sched: avoid using current->nsproxy
mptcp: sysctl: avail sched: remove write access
MAINTAINERS: remove Lars Povlsen from Microchip Sparx5 SoC
MAINTAINERS: remove Noam Dagan from AMAZON ETHERNET
MAINTAINERS: remove Ying Xue from TIPC
MAINTAINERS: remove Mark Lee from MediaTek Ethernet
MAINTAINERS: mark stmmac ethernet as an Orphan
MAINTAINERS: remove Andy Gospodarek from bonding
MAINTAINERS: update maintainers for Microchip LAN78xx
MAINTAINERS: mark Synopsys DW XPCS as Orphan
net/mlx5: Fix variable not being completed when function returns
rtase: Fix a check for error in rtase_alloc_msix()
net: stmmac: dwmac-tegra: Read iommu stream id from device tree
...
|
|
The RX adaptive interrupt moderation table is indexed by link speed
range, where the last row of the table is the catch-all for all link
speeds greater than 10Gbps. The comment said 10 - 40Gbps, but since
there are now adapters with link speeds than 40Gbps, the comment is now
wrong and should indicate it applies to all speeds greater than 10Gbps.
Co-developed-by: Nelson Escobar <neescoba@cisco.com>
Signed-off-by: Nelson Escobar <neescoba@cisco.com>
Co-developed-by: Satish Kharat <satishkh@cisco.com>
Signed-off-by: Satish Kharat <satishkh@cisco.com>
Signed-off-by: John Daley <johndale@cisco.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Link: https://patch.msgid.link/20250107214159.18807-4-johndale@cisco.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The link speed is obtained in the RX adaptive coalescing function. It
was being called at probe time when the link may not be up. Change the
call to run after the Link comes up.
The impact of not getting the correct link speed was that the low end of
the adaptive interrupt range was always being set to 0 which could have
caused a slight increase in the number of RX interrupts.
Co-developed-by: Nelson Escobar <neescoba@cisco.com>
Signed-off-by: Nelson Escobar <neescoba@cisco.com>
Co-developed-by: Satish Kharat <satishkh@cisco.com>
Signed-off-by: Satish Kharat <satishkh@cisco.com>
Signed-off-by: John Daley <johndale@cisco.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Link: https://patch.msgid.link/20250107214159.18807-3-johndale@cisco.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Move the function used for setting the RX coalescing range to before
the function that checks the link status. It needs to be called from
there instead of from the probe function.
There is no functional change.
Co-developed-by: Nelson Escobar <neescoba@cisco.com>
Signed-off-by: Nelson Escobar <neescoba@cisco.com>
Co-developed-by: Satish Kharat <satishkh@cisco.com>
Signed-off-by: Satish Kharat <satishkh@cisco.com>
Signed-off-by: John Daley <johndale@cisco.com>
Link: https://patch.msgid.link/20250107214159.18807-2-johndale@cisco.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Every ->exec_op() call correctly configures the spi bus speed to the
maximum allowed frequency for the memory using the constant spi default
parameter. Since we can now have per-operation constraints, let's use
the value that comes from the spi-mem operation structure instead. In
case there is no specific limitation for this operation, the default spi
device value will be given anyway.
The per-operation frequency capability is thus advertised to the spi-mem
core.
Cc: Michal Simek <michal.simek@amd.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://patch.msgid.link/20241224-winbond-6-11-rc1-quad-support-v2-17-ad218dbc406f@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Every ->exec_op() call correctly configures the spi bus speed to the
maximum allowed frequency for the memory using the constant spi default
parameter. Since we can now have per-operation constraints, let's use
the value that comes from the spi-mem operation structure instead. In
case there is no specific limitation for this operation, the default spi
device value will be given anyway.
The per-operation frequency capability is thus advertised to the spi-mem
core.
Cc: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://patch.msgid.link/20241224-winbond-6-11-rc1-quad-support-v2-16-ad218dbc406f@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Every ->exec_op() call correctly configures the spi bus speed to the
maximum allowed frequency for the memory using the constant spi default
parameter. Since we can now have per-operation constraints, let's use
the value that comes from the spi-mem operation structure instead. In
case there is no specific limitation for this operation, the default spi
device value will be given anyway.
The per-operation frequency capability is thus advertised to the spi-mem
core.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://patch.msgid.link/20241224-winbond-6-11-rc1-quad-support-v2-15-ad218dbc406f@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Every ->exec_op() call correctly configures the spi bus speed to the
maximum allowed frequency for the memory using the constant spi default
parameter. Since we can now have per-operation constraints, let's use
the value that comes from the spi-mem operation structure instead. In
case there is no specific limitation for this operation, the default spi
device value will be given anyway.
The per-operation frequency capability is thus advertised to the spi-mem
core.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://patch.msgid.link/20241224-winbond-6-11-rc1-quad-support-v2-14-ad218dbc406f@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Every ->exec_op() call correctly configures the spi bus speed to the
maximum allowed frequency for the memory using the constant spi default
parameter. Since we can now have per-operation constraints, let's use
the value that comes from the spi-mem operation structure instead. In
case there is no specific limitation for this operation, the default spi
device value will be given anyway.
The per-operation frequency capability is thus advertised to the spi-mem
core.
Cc: Han Xu <han.xu@nxp.com>
Cc: Haibo Chen <haibo.chen@nxp.com>
Cc: Yogesh Gaur <yogeshgaur.83@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://patch.msgid.link/20241224-winbond-6-11-rc1-quad-support-v2-13-ad218dbc406f@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Every ->exec_op() call correctly configures the spi bus speed to the
maximum allowed frequency for the memory using the constant spi default
parameter. Since we can now have per-operation constraints, let's use
the value that comes from the spi-mem operation structure instead. In
case there is no specific limitation for this operation, the default spi
device value will be given anyway.
The per-operation frequency capability is thus advertised to the spi-mem
core.
Cc: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://patch.msgid.link/20241224-winbond-6-11-rc1-quad-support-v2-12-ad218dbc406f@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Every ->exec_op() call correctly configures the spi bus speed to the
maximum allowed frequency for the memory using the constant spi default
parameter. Since we can now have per-operation constraints, let's use
the value that comes from the spi-mem operation structure instead. In
case there is no specific limitation for this operation, the default spi
device value will be given anyway.
The per-operation frequency capability is thus advertised to the spi-mem
core.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://patch.msgid.link/20241224-winbond-6-11-rc1-quad-support-v2-11-ad218dbc406f@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Every ->exec_op() call correctly configures the spi bus speed to the
maximum allowed frequency for the memory using the constant spi default
parameter. Since we can now have per-operation constraints, let's use
the value that comes from the spi-mem operation structure instead. In
case there is no specific limitation for this operation, the default spi
device value will be given anyway.
The per-operation frequency capability is thus advertised to the spi-mem
core.
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://patch.msgid.link/20241224-winbond-6-11-rc1-quad-support-v2-10-ad218dbc406f@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Every ->exec_op() call correctly configures the spi bus speed to the
maximum allowed frequency for the memory using the constant spi default
parameter. Since we can now have per-operation constraints, let's use
the value that comes from the spi-mem operation structure instead. In
case there is no specific limitation for this operation, the default spi
device value will be given anyway.
This controller however performed a frequency check, which is also
observed during the ->check_op() phase.
The per-operation frequency capability is thus advertised to the spi-mem
core.
Cc: Conor Dooley <conor.dooley@microchip.com>
Cc: Daire McNamara <daire.mcnamara@microchip.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://patch.msgid.link/20241224-winbond-6-11-rc1-quad-support-v2-9-ad218dbc406f@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Every ->exec_op() call correctly configures the spi bus speed to the
maximum allowed frequency for the memory using the constant spi default
parameter. Since we can now have per-operation constraints, let's use
the value that comes from the spi-mem operation structure instead. In
case there is no specific limitation for this operation, the default spi
device value will be given anyway.
The per-operation frequency capability is thus advertised to the spi-mem
core.
Cc: Han Xu <han.xu@nxp.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://patch.msgid.link/20241224-winbond-6-11-rc1-quad-support-v2-8-ad218dbc406f@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Every ->exec_op() call correctly configures the spi bus speed to the
maximum allowed frequency for the memory using the constant spi default
parameter. Since we can now have per-operation constraints, let's use
the value that comes from the spi-mem operation structure instead. In
case there is no specific limitation for this operation, the default spi
device value will be given anyway.
The per-operation frequency capability is thus advertised to the spi-mem
core.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://patch.msgid.link/20241224-winbond-6-11-rc1-quad-support-v2-7-ad218dbc406f@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Every ->exec_op() call correctly configures the spi bus speed to the
maximum allowed frequency for the memory using the constant spi default
parameter. Since we can now have per-operation constraints, let's use
the value that comes from the spi-mem operation structure instead. In
case there is no specific limitation for this operation, the default spi
device value will be given anyway.
The per-operation frequency capability is thus advertised to the spi-mem
core.
Reviewed-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://patch.msgid.link/20241224-winbond-6-11-rc1-quad-support-v2-6-ad218dbc406f@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Every ->exec_op() call correctly configures the spi bus speed to the
maximum allowed frequency for the memory using the constant spi default
parameter. Since we can now have per-operation constraints, let's use
the value that comes from the spi-mem operation structure instead. In
case there is no specific limitation for this operation, the default spi
device value will be given anyway.
The per-operation frequency capability is thus advertised to the spi-mem
core.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://patch.msgid.link/20241224-winbond-6-11-rc1-quad-support-v2-5-ad218dbc406f@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Both spi and spi-mem cores already take care of checking the minimum and
maximum speed for transfers depending on the controller
capabilities. There is no reason to repeat this check in controller
drivers.
Once this possible error condition removed from the function, it makes
no longer sense to return an int.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://patch.msgid.link/20241224-winbond-6-11-rc1-quad-support-v2-4-ad218dbc406f@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Every ->exec_op() call correctly configures the spi bus speed to the
maximum allowed frequency for the memory using the constant spi default
parameter. Since we can now have per-operation constraints, let's use
the value that comes from the spi-mem operation structure instead. In
case there is no specific limitation for this operation, the default spi
device value will be given anyway.
This controller however performed a frequency check, which is also
observed during the ->check_op() phase.
The per-operation frequency capability is thus advertised to the spi-mem
core.
Cc: Sanjay R Mehta <sanju.mehta@amd.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://patch.msgid.link/20241224-winbond-6-11-rc1-quad-support-v2-3-ad218dbc406f@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
There are spi devices with multiple frequency limitations depending on
the invoked command. We probably do not want to afford running at the
lowest supported frequency all the time, so if we want to get the most
of our hardware, we need to allow per-operation frequency limitations.
Among all the SPI memory controllers, I believe all are capable of
changing the spi frequency on the fly. Some of the drivers do not make
any frequency setup though. And some others will derive a per chip
prescaler value which will be used forever.
Actually changing the frequency on the fly is something new in Linux, so
we need to carefully flag the drivers which do and do not support it. A
controller capability is created for that, and the presence for this
capability will always be checked before accepting such pattern.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Link: https://patch.msgid.link/20241224-winbond-6-11-rc1-quad-support-v2-2-ad218dbc406f@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
In the spi subsystem, the bus frequency is derived as follows:
- the controller may expose a minimum and maximum operating frequency
- the hardware description, through the spi peripheral properties,
advise what is the maximum acceptable frequency from a device/wiring
point of view.
Transfers must be observed at a frequency which fits both (so in
practice, the lowest maximum).
Actually, this second point mixes two information and already takes the
lowest frequency among:
- what the spi device is capable of (what is written in the component
datasheet)
- what the wiring allows (electromagnetic sensibility, crossovers,
terminations, antenna effect, etc).
This logic works until spi devices are no longer capable of sustaining
their highest frequency regardless of the operation. Spi memories are
typically subject to such variation. Some devices are capable of
spitting their internally stored data (essentially in read mode) at a
very fast rate, typically up to 166MHz on Winbond SPI-NAND chips, using
"fast" commands. However, some of the low-end operations, such as
regular page read-from-cache commands, are more limited and can only be
executed at 54MHz at most. This is currently a problem in the SPI-NAND
subsystem. Another situation, even if not yet supported, will be with
DTR commands, when the data is latched on both edges of the clock. The
same chips as mentioned previously are in this case limited to
80MHz. Yet another example might be continuous reads, which, under
certain circumstances, can also run at most at 104 or 120MHz.
As a matter of fact, the "one frequency per chip" policy is outdated and
more fine grain configuration is needed: we need to allow per-operation
frequency limitations. So far, all datasheets I encountered advertise a
maximum default frequency, which need to be lowered for certain specific
operations. So based on the current infrastructure, we can still expect
firmware (device trees in general) to continued advertising the same
maximum speed which is a mix between the PCB limitations and the chip
maximum capability, and expect per-operation lower frequencies when this
is relevant.
Add a `struct spi_mem_op` member to carry this information. Not
providing this field explicitly from upper layers means that there is no
further constraint and the default spi device maximum speed will be
carried instead. The SPI_MEM_OP() macro is also expanded with an
optional frequency argument, because virtually all operations can be
subject to such a limitation, and this will allow for a smooth and
discrete transition.
For controller drivers which do not implement the spi-mem interface, the
per-transfer speed is also set acordingly to a lower (than the maximum
default) speed when relevant.
Acked-by: Pratyush Yadav <pratyush@kernel.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://patch.msgid.link/20241224-winbond-6-11-rc1-quad-support-v2-1-ad218dbc406f@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The guc_mmio_reg interface supports steering, but it is currently not
implemented. This will allow the GuC to control steering of MMIO
registers after save-restore and avoid reading from fused off MCR
register instances.
Fixes: 9c57bc08652a ("drm/xe/lnl: Drop force_probe requirement")
Signed-off-by: Jesus Narvaez <jesus.narvaez@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241212190100.3768068-1-jesus.narvaez@intel.com
|
|
Atish Patra <atishp@rivosinc.com> says:
Here are two minor improvement/fixes in the PMU event path. The first patch
was part of the series[1]. The 2nd patch was suggested during the series
review.
While the series can only be merged once SBI v3.0 is frozen, these two
patches can be independent of SBI v3.0 and can be merged sooner. Hence, these
two patches are sent as a separate series.
* b4-shazam-merge:
drivers/perf: riscv: Do not allow invalid raw event config
drivers/perf: riscv: Return error for default case
drivers/perf: riscv: Fix Platform firmware event data
Link: https://lore.kernel.org/r/20241212-pmu_event_fixes_v2-v2-0-813e8a4f5962@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
The SBI specification allows only lower 48bits of hpmeventX to be
configured via SBI PMU. Currently, the driver masks of the higher
bits but doesn't return an error. This will lead to an additional
SBI call for config matching which should return for an invalid
event error in most of the cases.
However, if a platform(i.e Rocket and sifive cores) implements a
bitmap of all bits in the event encoding this will lead to an
incorrect event being programmed leading to user confusion.
Report the error to the user if higher bits are set during the
event mapping itself to avoid the confusion and save an additional
SBI call.
Suggested-by: Samuel Holland <samuel.holland@sifive.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20241212-pmu_event_fixes_v2-v2-3-813e8a4f5962@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
If the upper two bits has an invalid valid (0x1), the event mapping
is not reliable as it returns an uninitialized variable.
Return appropriate value for the default case.
Fixes: f0c9363db2dd ("perf/riscv-sbi: Add platform specific firmware event handling")
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20241212-pmu_event_fixes_v2-v2-2-813e8a4f5962@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Platform firmware event data field is allowed to be 62 bits for
Linux as uppper most two bits are reserved to indicate SBI fw or
platform specific firmware events.
However, the event data field is masked as per the hardware raw
event mask which is not correct.
Fix the platform firmware event data field with proper mask.
Fixes: f0c9363db2dd ("perf/riscv-sbi: Add platform specific firmware event handling")
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20241212-pmu_event_fixes_v2-v2-1-813e8a4f5962@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Fix all typos in files of xe, reported by codespell tool.
Signed-off-by: Nitin Gote <nitin.r.gote@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Reviewed-by: Stuart Summers <stuart.summers@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250106102646.1400146-2-nitin.r.gote@intel.com
Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
|
|
Previously, the regulator core resolved its supply only from the parent
device or its children, ignoring the of_node specified in the
regulator_config structure.
This behavior causes issues in scenarios where multiple regulator devices
are registered for components described as children of a controller, each
with their own specific regulator supply.
For instance, in a PSE controller with multiple PIs (Power Interfaces),
each PI may have a distinct regulator supply. However, the regulator core
would incorrectly use the PSE controller node or its first child to look up
the regulator supply, rather than the node specified by the
regulator_config->of_node for the PI.
This update modifies the behavior to prioritize the of_node in
regulator_config for resolving the supply. This ensures correct resolution
of the power supply for each device. If no supply is found in the provided
of_node, the core falls back to searching within the parent device as
before.
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20250109-b4-feature_poe_arrange-v2-13-55ded947b510@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
When cmd_alloc_index(), fails cmd_work_handler() needs
to complete ent->slotted before returning early.
Otherwise the task which issued the command may hang:
mlx5_core 0000:01:00.0: cmd_work_handler:877:(pid 3880418): failed to allocate command entry
INFO: task kworker/13:2:4055883 blocked for more than 120 seconds.
Not tainted 4.19.90-25.44.v2101.ky10.aarch64 #1
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
kworker/13:2 D 0 4055883 2 0x00000228
Workqueue: events mlx5e_tx_dim_work [mlx5_core]
Call trace:
__switch_to+0xe8/0x150
__schedule+0x2a8/0x9b8
schedule+0x2c/0x88
schedule_timeout+0x204/0x478
wait_for_common+0x154/0x250
wait_for_completion+0x28/0x38
cmd_exec+0x7a0/0xa00 [mlx5_core]
mlx5_cmd_exec+0x54/0x80 [mlx5_core]
mlx5_core_modify_cq+0x6c/0x80 [mlx5_core]
mlx5_core_modify_cq_moderation+0xa0/0xb8 [mlx5_core]
mlx5e_tx_dim_work+0x54/0x68 [mlx5_core]
process_one_work+0x1b0/0x448
worker_thread+0x54/0x468
kthread+0x134/0x138
ret_from_fork+0x10/0x18
Fixes: 485d65e13571 ("net/mlx5: Add a timeout to acquire the command queue semaphore")
Signed-off-by: Chenguang Zhao <zhaochenguang@kylinos.cn>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Acked-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20250108030009.68520-1-zhaochenguang@kylinos.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The pci_irq_vector() function never returns zero. It returns negative
error codes or a positive non-zero IRQ number. Fix the error checking to
test for negatives.
Fixes: a36e9f5cfe9e ("rtase: Add support for a pci table in this module")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Link: https://patch.msgid.link/f2ecc88d-af13-4651-9820-7cc665230019@stanley.mountain
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Nvidia's Tegra MGBE controllers require the IOMMU "Stream ID" (SID) to be
written to the MGBE_WRAP_AXI_ASID0_CTRL register.
The current driver is hard coded to use MGBE0's SID for all controllers.
This causes softirq time outs and kernel panics when using controllers
other than MGBE0.
Example dmesg errors when an ethernet cable is connected to MGBE1:
[ 116.133290] tegra-mgbe 6910000.ethernet eth1: Link is Up - 1Gbps/Full - flow control rx/tx
[ 121.851283] tegra-mgbe 6910000.ethernet eth1: NETDEV WATCHDOG: CPU: 5: transmit queue 0 timed out 5690 ms
[ 121.851782] tegra-mgbe 6910000.ethernet eth1: Reset adapter.
[ 121.892464] tegra-mgbe 6910000.ethernet eth1: Register MEM_TYPE_PAGE_POOL RxQ-0
[ 121.905920] tegra-mgbe 6910000.ethernet eth1: PHY [stmmac-1:00] driver [Aquantia AQR113] (irq=171)
[ 121.907356] tegra-mgbe 6910000.ethernet eth1: Enabling Safety Features
[ 121.907578] tegra-mgbe 6910000.ethernet eth1: IEEE 1588-2008 Advanced Timestamp supported
[ 121.908399] tegra-mgbe 6910000.ethernet eth1: registered PTP clock
[ 121.908582] tegra-mgbe 6910000.ethernet eth1: configuring for phy/10gbase-r link mode
[ 125.961292] tegra-mgbe 6910000.ethernet eth1: Link is Up - 1Gbps/Full - flow control rx/tx
[ 181.921198] rcu: INFO: rcu_preempt detected stalls on CPUs/tasks:
[ 181.921404] rcu: 7-....: (1 GPs behind) idle=540c/1/0x4000000000000002 softirq=1748/1749 fqs=2337
[ 181.921684] rcu: (detected by 4, t=6002 jiffies, g=1357, q=1254 ncpus=8)
[ 181.921878] Sending NMI from CPU 4 to CPUs 7:
[ 181.921886] NMI backtrace for cpu 7
[ 181.922131] CPU: 7 UID: 0 PID: 0 Comm: swapper/7 Kdump: loaded Not tainted 6.13.0-rc3+ #6
[ 181.922390] Hardware name: NVIDIA CTI Forge + Orin AGX/Jetson, BIOS 202402.1-Unknown 10/28/2024
[ 181.922658] pstate: 40400009 (nZcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 181.922847] pc : handle_softirqs+0x98/0x368
[ 181.922978] lr : __do_softirq+0x18/0x20
[ 181.923095] sp : ffff80008003bf50
[ 181.923189] x29: ffff80008003bf50 x28: 0000000000000008 x27: 0000000000000000
[ 181.923379] x26: ffffce78ea277000 x25: 0000000000000000 x24: 0000001c61befda0
[ 181.924486] x23: 0000000060400009 x22: ffffce78e99918bc x21: ffff80008018bd70
[ 181.925568] x20: ffffce78e8bb00d8 x19: ffff80008018bc20 x18: 0000000000000000
[ 181.926655] x17: ffff318ebe7d3000 x16: ffff800080038000 x15: 0000000000000000
[ 181.931455] x14: ffff000080816680 x13: ffff318ebe7d3000 x12: 000000003464d91d
[ 181.938628] x11: 0000000000000040 x10: ffff000080165a70 x9 : ffffce78e8bb0160
[ 181.945804] x8 : ffff8000827b3160 x7 : f9157b241586f343 x6 : eeb6502a01c81c74
[ 181.953068] x5 : a4acfcdd2e8096bb x4 : ffffce78ea277340 x3 : 00000000ffffd1e1
[ 181.960329] x2 : 0000000000000101 x1 : ffffce78ea277340 x0 : ffff318ebe7d3000
[ 181.967591] Call trace:
[ 181.970043] handle_softirqs+0x98/0x368 (P)
[ 181.974240] __do_softirq+0x18/0x20
[ 181.977743] ____do_softirq+0x14/0x28
[ 181.981415] call_on_irq_stack+0x24/0x30
[ 181.985180] do_softirq_own_stack+0x20/0x30
[ 181.989379] __irq_exit_rcu+0x114/0x140
[ 181.993142] irq_exit_rcu+0x14/0x28
[ 181.996816] el1_interrupt+0x44/0xb8
[ 182.000316] el1h_64_irq_handler+0x14/0x20
[ 182.004343] el1h_64_irq+0x80/0x88
[ 182.007755] cpuidle_enter_state+0xc4/0x4a8 (P)
[ 182.012305] cpuidle_enter+0x3c/0x58
[ 182.015980] cpuidle_idle_call+0x128/0x1c0
[ 182.020005] do_idle+0xe0/0xf0
[ 182.023155] cpu_startup_entry+0x3c/0x48
[ 182.026917] secondary_start_kernel+0xdc/0x120
[ 182.031379] __secondary_switched+0x74/0x78
[ 212.971162] rcu: INFO: rcu_preempt detected expedited stalls on CPUs/tasks: { 7-.... } 6103 jiffies s: 417 root: 0x80/.
[ 212.985935] rcu: blocking rcu_node structures (internal RCU debug):
[ 212.992758] Sending NMI from CPU 0 to CPUs 7:
[ 212.998539] NMI backtrace for cpu 7
[ 213.004304] CPU: 7 UID: 0 PID: 0 Comm: swapper/7 Kdump: loaded Not tainted 6.13.0-rc3+ #6
[ 213.016116] Hardware name: NVIDIA CTI Forge + Orin AGX/Jetson, BIOS 202402.1-Unknown 10/28/2024
[ 213.030817] pstate: 40400009 (nZcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 213.040528] pc : handle_softirqs+0x98/0x368
[ 213.046563] lr : __do_softirq+0x18/0x20
[ 213.051293] sp : ffff80008003bf50
[ 213.055839] x29: ffff80008003bf50 x28: 0000000000000008 x27: 0000000000000000
[ 213.067304] x26: ffffce78ea277000 x25: 0000000000000000 x24: 0000001c61befda0
[ 213.077014] x23: 0000000060400009 x22: ffffce78e99918bc x21: ffff80008018bd70
[ 213.087339] x20: ffffce78e8bb00d8 x19: ffff80008018bc20 x18: 0000000000000000
[ 213.097313] x17: ffff318ebe7d3000 x16: ffff800080038000 x15: 0000000000000000
[ 213.107201] x14: ffff000080816680 x13: ffff318ebe7d3000 x12: 000000003464d91d
[ 213.116651] x11: 0000000000000040 x10: ffff000080165a70 x9 : ffffce78e8bb0160
[ 213.127500] x8 : ffff8000827b3160 x7 : 0a37b344852820af x6 : 3f049caedd1ff608
[ 213.138002] x5 : cff7cfdbfaf31291 x4 : ffffce78ea277340 x3 : 00000000ffffde04
[ 213.150428] x2 : 0000000000000101 x1 : ffffce78ea277340 x0 : ffff318ebe7d3000
[ 213.162063] Call trace:
[ 213.165494] handle_softirqs+0x98/0x368 (P)
[ 213.171256] __do_softirq+0x18/0x20
[ 213.177291] ____do_softirq+0x14/0x28
[ 213.182017] call_on_irq_stack+0x24/0x30
[ 213.186565] do_softirq_own_stack+0x20/0x30
[ 213.191815] __irq_exit_rcu+0x114/0x140
[ 213.196891] irq_exit_rcu+0x14/0x28
[ 213.202401] el1_interrupt+0x44/0xb8
[ 213.207741] el1h_64_irq_handler+0x14/0x20
[ 213.213519] el1h_64_irq+0x80/0x88
[ 213.217541] cpuidle_enter_state+0xc4/0x4a8 (P)
[ 213.224364] cpuidle_enter+0x3c/0x58
[ 213.228653] cpuidle_idle_call+0x128/0x1c0
[ 213.233993] do_idle+0xe0/0xf0
[ 213.237928] cpu_startup_entry+0x3c/0x48
[ 213.243791] secondary_start_kernel+0xdc/0x120
[ 213.249830] __secondary_switched+0x74/0x78
This bug has existed since the dwmac-tegra driver was added in Dec 2022
(See Fixes tag below for commit hash).
The Tegra234 SOC has 4 MGBE controllers, however Nvidia's Developer Kit
only uses MGBE0 which is why the bug was not found previously. Connect Tech
has many products that use 2 (or more) MGBE controllers.
The solution is to read the controller's SID from the existing "iommus"
device tree property. The 2nd field of the "iommus" device tree property
is the controller's SID.
Device tree snippet from tegra234.dtsi showing MGBE1's "iommus" property:
smmu_niso0: iommu@12000000 {
compatible = "nvidia,tegra234-smmu", "nvidia,smmu-500";
...
}
/* MGBE1 */
ethernet@6900000 {
compatible = "nvidia,tegra234-mgbe";
...
iommus = <&smmu_niso0 TEGRA234_SID_MGBE_VF1>;
...
}
Nvidia's arm-smmu driver reads the "iommus" property and stores the SID in
the MGBE device's "fwspec" struct. The dwmac-tegra driver can access the
SID using the tegra_dev_iommu_get_stream_id() helper function found in
linux/iommu.h.
Calling tegra_dev_iommu_get_stream_id() should not fail unless the "iommus"
property is removed from the device tree or the IOMMU is disabled.
While the Tegra234 SOC technically supports bypassing the IOMMU, it is not
supported by the current firmware, has not been tested and not recommended.
More detailed discussion with Thierry Reding from Nvidia linked below.
Fixes: d8ca113724e7 ("net: stmmac: tegra: Add MGBE support")
Link: https://lore.kernel.org/netdev/cover.1731685185.git.pnewman@connecttech.com
Signed-off-by: Parker Newman <pnewman@connecttech.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://patch.msgid.link/6fb97f32cf4accb4f7cf92846f6b60064ba0a3bd.1736284360.git.pnewman@connecttech.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
On the Dell Precision M6800/OXD1M5, BIOS A26 06/13/2029, Linux prints the
warning below.
i801_smbus 0000:00:1f.4: Accelerometer lis3lv02d is present on SMBus but its address is unknown, skipping registration
Following the same suggestions by Wolfram Sang as for the Dell Precision
3540 [1], the accelerometer can be successfully found on I2C bus 0 at
address 0x29.
$ echo lis3lv02d 0x29 | sudo tee /sys/bus/i2c/devices/i2c-0/new_device
lis3lv02d 0x29
$ dmesg | tail -5
[1185.385204] lis3lv02d_i2c 0-0029: supply Vdd not found, using dummy regulator
[1185.385235] lis3lv02d_i2c 0-0029: supply Vdd_IO not found, using dummy regulator
[1185.399689] lis3lv02d: 8 bits 3DC sensor found
[1185.449391] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input371
[1185.449577] i2c i2c-0: new_device: Instantiated device lis3lv02d at 0x29
So, the device has that accelerometer. Add the I2C address to the
mapping list, and test it successfully on the device.
[1]: https://lore.kernel.org/linux-i2c/97708c11-ac85-fb62-2c8e-d37739ca826f@molgen.mpg.de/
Signed-off-by: Patrick Höhn <hoehnp@gmx.de>
Acked-by: Pali Rohár <pali@kernel.org>
Link: https://lore.kernel.org/r/20240312193132.26518-1-hoehnp@gmx.de
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
Since the changes in
commit f748a07a0b64 ("PCI: Remove legacy pcim_release()")
all pcim_enable_device() does is set up a callback that disables the
device from being disabled from driver detach. The function
pcim_pin_device() prevents said disabling. pcim_enable_device(),
therefore, sets up an action that is removed immediately afterwards by
pcim_pin_device().
Replace pcim_enable_device() with pci_enable_device() and remove the
unnecessary call to pcim_pin_device().
Signed-off-by: Philipp Stanner <pstanner@redhat.com>
Link: https://lore.kernel.org/r/20241121195624.144839-2-pstanner@redhat.com
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
