summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2025-01-06drm/amdgpu: Fix for MEC SJT FW Load Fail on VFyfeng1
Users might switch to ROCM build does not include MEC SJT FW and driver needs to consider this case.w Signed-off-by: yfeng1 <yfeng1@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-06drm/amd/display: Promote DC to 3.2.315Martin Leung
This version brings along the following: - Add Interface to Dump DSC Caps from dm - Add DP required HBlank size calc to link interface - Add 6bpc RGB case for dcn32 output bpp calculations - Add VC for VESA Aux Backlight Control - Add support for setting multiple CRC windows in dc - Clean up SPL code and outdated interfaces in dcn401_clk_mgr - Disable replay and psr while VRR is enabled - Fix PSR-SU not support but still call the amdgpu_dm_psr_enable - Implement Replay Low Hz Visual Confirm - Extend dc_stream_get_crc to support 2nd crc engine - Update power gating logic for DCN35 hw Reviewed-by: Roman Li <roman.li@amd.com> Signed-off-by: Martin Leung <Martin.Leung@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-06drm/amd/display: Extend capability to get multiple ROI CRCsWayne Lin
[Why & How] We already extend our dm, dc and dmub to support setting of multiple CRC instances, now extend the capability to return back the ROI/CRC pair result from psp by specifying activated ROI instances. Reviewed-by: HaoPing Liu <haoping.liu@amd.com> Signed-off-by: Wayne Lin <Wayne.Lin@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-06drm/amd/display: Add VC for VESA Aux Backlight ControlIswara Nagulendran
[WHY] There is no way to distinguish the static backlight control type being used and the VABC support without the use of a debugger or reading DPCD registers. [HOW] Add Visual Confirm support for VESA Aux-based Backlight Control. Reviewed-by: Harry Vanzylldejong <harry.vanzylldejong@amd.com> Signed-off-by: Iswara Nagulendran <Iswara.Nagulendran@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-06drm/amd/display: Clean up SPL codeSamson Tam
[Why & How] Use helper functions for checking formats Apply cositing offset in rotation case Reviewed-by: Navid Assadian <navid.assadian@amd.com> Signed-off-by: Samson Tam <Samson.Tam@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-06drm/amd/display: Add check for granularity in dml ceil/floor helpersRoman Li
[Why] Wrapper functions for dcn_bw_ceil2() and dcn_bw_floor2() should check for granularity is non zero to avoid assert and divide-by-zero error in dcn_bw_ functions. [How] Add check for granularity 0. Cc: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Roman Li <Roman.Li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-06drm/amd/display: Add 6bpc RGB case for dcn32 output bpp calculationsGeorge Shen
[Why] Current DCN32 calculation doesn't consider RGB 6bpc for the DP case. This results in an invalid output bpp being calculated when DSC is not enabled in the configuration, failing the mode validation. [How] Add special case to handle 6bpc RGB in the output bpp calculation. Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: George Shen <george.shen@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-06drm/amd/display: Disable replay and psr while VRR is enabledTom Chung
[Why] Replay and PSR will cause some video corruption while VRR is enabled. [How] 1. Disable the Replay and PSR while VRR is enabled. 2. Change the amdgpu_dm_crtc_vrr_active() parameter to const. Because the function will only read data from dm_crtc_state. Reviewed-by: Sun peng Li <sunpeng.li@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-06drm/amd/display: Fix PSR-SU not support but still call the amdgpu_dm_psr_enableTom Chung
[Why] The enum DC_PSR_VERSION_SU_1 of psr_version is 1 and DC_PSR_VERSION_UNSUPPORTED is 0xFFFFFFFF. The original code may has chance trigger the amdgpu_dm_psr_enable() while psr version is set to DC_PSR_VERSION_UNSUPPORTED. [How] Modify the condition to psr->psr_version == DC_PSR_VERSION_SU_1 Reviewed-by: Sun peng Li <sunpeng.li@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-06drm/amd/display: Add HBlank reduction DPCD write to DPMS sequenceGeorge Shen
[Why] Certain small HBlank timings may not have a large enough HBlank to support audio when low bpp DSC is enabled. HBlank expansion by the source can solve this problem, but requires the branch/sink to support HBlank reduction. [How] Update DPMS sequence to call DM to perform DPCD write to enable HBlank reduction on the branch/sink. Add stub in dm_helpers to be implemented later. Reviewed-by: Michael Strauss <michael.strauss@amd.com> Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: George Shen <george.shen@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-06drm/amd/display: Optimize cursor position updatesAric Cyr
[why] Updating the cursor enablement register can be a slow operation and accumulates when high polling rate cursors cause frequent updates asynchronously to the cursor position. [how] Since the cursor enable bit is cached there is no need to update the enablement register if there is no change to it. This removes the read-modify-write from the cursor position programming path in HUBP and DPP, leaving only the register writes. Reviewed-by: Josip Pavic <josip.pavic@amd.com> Signed-off-by: Aric Cyr <Aric.Cyr@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-06drm/amd/display: fix init_adj offset for cositing in SPLSamson Tam
[Why & How] init_adj offset is applied when cosited not interstitial Adjust cositing offset in SPL Reviewed-by: Jun Lei <jun.lei@amd.com> Signed-off-by: Samson Tam <Samson.Tam@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-06drm/amd/display: Ensure correct GFX tiling info passed to DMLKarthi Kandasamy
[Why] To ensure DML validation receives the correct tiling information, such as swizzle mode or array mode, based on the active GFX format [How] - For new GFX format passed swizzle_mode to DML. - For legacy GFX format passed array_mode to DML. - Dynamically determined the appropriate tiling info based on the active GFX format. [Description] This commit ensures that the correct GFX tiling information is passed to DML. Depending on the active GFX format, the appropriate tiling info is passed to DML. This change accommodates the different GFX formats supported by latest platforms, ensuring compatibility and proper DML validation. Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Karthi Kandasamy <karthi.kandasamy@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-06drm/amd/display: Update dc_tiling_info union to structureKarthi Kandasamy
[WHY] The `dc_tiling_info` union previously did not have a field to specify the active GFX format, assuming only one format would be used per DCN version. from DCN4+, support for switching between different GFX formats is introduced, requiring a way to track which format is currently in use. [HOW] Updated the `dc_tiling_info` union to include a new field that explicitly indicates the currently used GFX format. This allows the system to determine the active GFX format and take the correct programming path accordingly. [Description] The union `dc_tiling_info` has been updated to support multiple GFX formats by adding a new field for identifying the active format. This update ensures that the correct programming path is followed based on the selected format. All references to `dc_tiling_info` in the codebase have been updated to reflect the new structure. Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Karthi Kandasamy <karthi.kandasamy@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-06drm/amd/display: modify init dc_power_stateBrandon Syu
[why] initialize the power state for dc use, but dc_set_power_state it not called at D3. It would cause can't recognize last power state [how] remove initialize the power state for dc use, it is not necessary. Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Brandon Syu <Brandon.Syu@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-06drm/amd/display: have pretrain for dpiaPeichen Huang
[WHY] We like to have pretrain for dpia link so that dp and dp tunneling have aligned behavior. The Main difficult for dpia pretrain is that encoder can not get corresponded dpia port when link detection in current implementation. [HOW] 1. create enable/disable dpia output functions for dcn35 encoder and have dpia_id and other necessary info as inputs. 2. dcn35 dpia use the new functions to enable/disable output. 3. have a option to enable/disable the change. Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Reviewed-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com> Signed-off-by: Peichen Huang <PeiChen.Huang@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-06drm/amd/display: Implement Replay Low Hz Visual ConfirmDennis.Chan
[why] Add new Visual confirm color for Replay Low Hz. Reviewed-by: Robin Chen <robin.chen@amd.com> Signed-off-by: Dennis.Chan <Dennis.Chan@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-06drm/amd/display: Add Interface to Dump DSC Caps from dmFangzhi Zuo
No common dsc params found between encoder and decoder is one of the reason that could prevent dsc from properly enabled. Dump the params to a specific timing to help locate possible invalid dsc params in either encoder or decoder side. Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-06drm/amd/display: Add guards around MAX/MINAurabindo Pillai
MAX/MIN macros maybe defined already, hence add a guard around them to prevent errors that complain about redefinition like: drivers/gpu/drm/amd/amdgpu/../dal-dev/modules/hdcp/hdcp_ddc.c:31: error: "MIN" redefined [-Werror] 31 | #define MIN(a, b) ((a) < (b) ? (a) : (b)) | In file included from ./include/linux/kernel.h:28, from ./include/linux/cpumask.h:11, from ./include/linux/smp.h:13, from ./include/linux/lockdep.h:14, from ./include/linux/spinlock.h:63, from ./include/linux/mmzone.h:8, from ./include/linux/gfp.h:7, from ./include/linux/slab.h:16, from drivers/gpu/drm/amd/amdgpu/../display/dc/os_types.h:37, from drivers/gpu/drm/amd/amdgpu/../display/modules/inc/mod_hdcp.h:29, from drivers/gpu/drm/amd/amdgpu/../display/modules/hdcp/hdcp.h:29, from drivers/gpu/drm/amd/amdgpu/../display/modules/hdcp/hdcp_ddc.c:29: ./include/linux/minmax.h:329: note: this is the location of the previous definition 329 | #define MIN(a,b) __cmp(min,a,b) | cc1: all warnings being treated as errors Reviewed-by: Sun peng Li <sunpeng.li@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-06drm/amd/display: correct type mismatches in comparisons in DML2Natanel Roizenman
[Why] Comparisons were made between unsigned char and unsigned int. [How] Corrected by changing variable types. Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Natanel Roizenman <Natanel.Roizenman@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-06drm/amd/display: Adjust dm to use supported interfaces for setting multiple ↵Wayne Lin
crc windows [Why & How] We actually have the capability to calculate independent CRC for 2 crc window at the same time. Extend dm with the capability by having array to configure/maintain multiple crc windows. Add the flexibility but use 1st CRC instance only for now. Can change to use the 2nd CRC instance if needed. Reviewed-by: HaoPing Liu <haoping.liu@amd.com> Signed-off-by: Wayne Lin <Wayne.Lin@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-06drm/amd/display: Extend dc_stream_get_crc to support 2nd crc engineWayne Lin
[Why & How] Since now we can set multiple crc windows for secure display, add a new input parameter for dc_stream_get_crc to indicate to fetch crc from which crc engine. Reviewed-by: HaoPing Liu <haoping.liu@amd.com> Signed-off-by: Wayne Lin <Wayne.Lin@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-06drm/amd/display: Add support for setting multiple CRC windows in dcWayne Lin
[Why & How] Have to support multiple CRC windows setting to dmub. Add new dmub forward functions for supporting/forwarding multiple crc windows setting to dmub. Reviewed-by: HaoPing Liu <haoping.liu@amd.com> Signed-off-by: Wayne Lin <Wayne.Lin@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-06drm/amd/display: Add expanded HBlank field to dc_crtc_timingGeorge Shen
[Why] For DP HBlank expansion/reduction, the HBlank parameters of the original EDID timing needs to be notified to the sink in order for the timing to be reduced back to the original HBlank size. [How] Add parameter in dc_crtc_timing to track the increased HBlank. Reviewed-by: Michael Strauss <michael.strauss@amd.com> Signed-off-by: George Shen <george.shen@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-06drm/amd/display: Add DP required HBlank size calc to link interfaceGeorge Shen
[Why] Some features, such as HBlank expansion/reduction, needs to know how much HBlank is required to support basic audio. [How] Add interface to link to calculate required HBlank size for a given link + timing combination to support basic audio (i.e. 2-channel 48KHz). Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: George Shen <george.shen@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-06drm/amd/display: Parse RECEIVE_PORT0_CAP capabilities from DPCDGeorge Shen
[Why] DPCD register RECEIVE_PORT0_CAP contains HBlank expansion/reduction capabilities of a DP device. These capabilities are required to enable HBlank expansion/reduction logic. [How] Read raw RECEIVE_PORT0_CAP register values and store parsed fields. Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: George Shen <george.shen@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-06drm/amd/display: Cleanup outdated interfaces in dcn401_clk_mgrDillon Varone
[WHY&HOW] - Remove legacy update clocks sequence - FCLK P-State allow message is not required Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-06drm/amd/display: power up all gating blocks when releasing hw DCN35Yihan Zhu
[WHY & HOW] Driver disable will deallocate framebuffer to reset IPS state, this will cause IPS start with INIT state to blindly power gate ONO region to break power sequence. All the gating blocks should be powered up when releasing hw to ensure all the power optimizations are identical to pre-OS. Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Duncan Ma <duncan.ma@amd.com> Signed-off-by: Yihan Zhu <Yihan.Zhu@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-06drm/amd/display: update sequential pg logic DCN35Yihan Zhu
[WHY & HOW] No check for HUBP/DPP power gating when DSC instance is still running. Avoid HUBP/DPP to power gate when corresponding DSC block is still running in the power gating calculation. Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Duncan Ma <duncan.ma@amd.com> Signed-off-by: Yihan Zhu <Yihan.Zhu@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-06drm/amdkfd: fixed page fault when enable MES shader debuggerJesse.zhang@amd.com
Initialize the process context address before setting the shader debugger. [ 260.781212] amdgpu 0000:03:00.0: amdgpu: [gfxhub] page fault (src_id:0 ring:32 vmid:0 pasid:0) [ 260.781236] amdgpu 0000:03:00.0: amdgpu: in page starting at address 0x0000000000000000 from client 10 [ 260.781255] amdgpu 0000:03:00.0: amdgpu: GCVM_L2_PROTECTION_FAULT_STATUS:0x00040A40 [ 260.781270] amdgpu 0000:03:00.0: amdgpu: Faulty UTCL2 client ID: CPC (0x5) [ 260.781284] amdgpu 0000:03:00.0: amdgpu: MORE_FAULTS: 0x0 [ 260.781296] amdgpu 0000:03:00.0: amdgpu: WALKER_ERROR: 0x0 [ 260.781308] amdgpu 0000:03:00.0: amdgpu: PERMISSION_FAULTS: 0x4 [ 260.781320] amdgpu 0000:03:00.0: amdgpu: MAPPING_ERROR: 0x0 [ 260.781332] amdgpu 0000:03:00.0: amdgpu: RW: 0x1 [ 260.782017] amdgpu 0000:03:00.0: amdgpu: [gfxhub] page fault (src_id:0 ring:32 vmid:0 pasid:0) [ 260.782039] amdgpu 0000:03:00.0: amdgpu: in page starting at address 0x0000000000000000 from client 10 [ 260.782058] amdgpu 0000:03:00.0: amdgpu: GCVM_L2_PROTECTION_FAULT_STATUS:0x00040A41 [ 260.782073] amdgpu 0000:03:00.0: amdgpu: Faulty UTCL2 client ID: CPC (0x5) [ 260.782087] amdgpu 0000:03:00.0: amdgpu: MORE_FAULTS: 0x1 [ 260.782098] amdgpu 0000:03:00.0: amdgpu: WALKER_ERROR: 0x0 [ 260.782110] amdgpu 0000:03:00.0: amdgpu: PERMISSION_FAULTS: 0x4 [ 260.782122] amdgpu 0000:03:00.0: amdgpu: MAPPING_ERROR: 0x0 [ 260.782137] amdgpu 0000:03:00.0: amdgpu: RW: 0x1 [ 260.782155] amdgpu 0000:03:00.0: amdgpu: [gfxhub] page fault (src_id:0 ring:32 vmid:0 pasid:0) [ 260.782166] amdgpu 0000:03:00.0: amdgpu: in page starting at address 0x0000000000000000 from client 10 Fixes: 438b39ac74e2 ("drm/amdkfd: pause autosuspend when creating pdd") Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3849 Signed-off-by: Jesse Zhang <jesse.zhang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-01-06drm/drv: Add drmm managed registration helper for dmem cgroups.Maxime Ripard
Drivers will need to register dmem regions at probe time, so let's give them a drm-managed helper. Signed-off-by: Maarten Lankhorst <dev@lankhorst.se> Acked-by: Tejun Heo <tj@kernel.org> Link: https://lore.kernel.org/r/20241204134410.1161769-3-dev@lankhorst.se Signed-off-by: Maxime Ripard <mripard@kernel.org>
2025-01-06drm/i915/ddi: Optimize mtl_port_buf_ctl_programSuraj Kandpal
A small optimization and cleanup for mtl_port_buf_ctl_program function which lets use intel_de_rmw instead of a intel_de_read and intel_de_write. Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250103051705.145161-3-suraj.kandpal@intel.com
2025-01-06drm/i915/dp: Use intel_display instead of drm_i915_privateSuraj Kandpal
Use intel display instead of drm_i915_private in mtl_ddi_prepare_link_retrain & mtl_port_buf_ctl_program functions. Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250103051705.145161-2-suraj.kandpal@intel.com
2025-01-06Revert "drm/i915/hdcp: Don't enable HDCP1.4 directly from check_link"Suraj Kandpal
This reverts commit 483f7d94a0453564ad9295288c0242136c5f36a0. This needs to be reverted since HDCP even after updating the connector state HDCP property we don't reenable HDCP until the next commit in which the CP Property is set causing compliance to fail. --v2 -Fix build issue [Dnyaneshwar] Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com> Reviewed-by: Dnyaneshwar Bhadane <dnyaneshwar.bhadane@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250103084517.239998-1-suraj.kandpal@intel.com
2025-01-05Merge tag 'clk-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk fixes from Stephen Boyd: "A randconfig build fix and a performance fix: - Fix the CONFIG_RESET_CONTROLLER=n path signature of clk_imx8mp_audiomix_reset_controller_register() to appease randconfig - Speed up the sdhci clk on TH1520 by a factor of 4 by adding a fixed factor clk" * tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: clk: clk-imx8mp-audiomix: fix function signature clk: thead: Fix TH1520 emmc and shdci clock rate
2025-01-05drm/rockchip: vop2: Support 32x8 superblock afbcAndy Yan
This is the only afbc format supported by the upcoming VOP for rk3576. Add support for it. Signed-off-by: Andy Yan <andy.yan@rock-chips.com> Tested-by: Michael Riesch <michael.riesch@wolfvision.net> # on RK3568 Tested-by: Detlev Casanova <detlev.casanova@collabora.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/20241231090802.251787-2-andyshrk@163.com
2025-01-04Merge tag 'linux-watchdog-6.13-rc6' of ↵Linus Torvalds
git://www.linux-watchdog.org/linux-watchdog Pull watchdog fix from Wim Van Sebroeck: - fix error message during stm32 driver probe * tag 'linux-watchdog-6.13-rc6' of git://www.linux-watchdog.org/linux-watchdog: watchdog: stm32_iwdg: fix error message during driver probe
2025-01-04drm/vc4: hdmi: use drm_atomic_helper_connector_hdmi_hotplug()Dmitry Baryshkov
Use the helper function to update the connector's information. This makes sure that HDMI-related events are handled in a generic way. Currently it is limited to the HDMI state reporting to the sound system. Acked-by: Maxime Ripard <mripard@kernel.org> Tested-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241224-drm-bridge-hdmi-connector-v10-10-dc89577cd438@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2025-01-04drm/vc4: hdmi: stop rereading EDID in get_modes()Dmitry Baryshkov
The vc4_hdmi_connector_detect_ctx() via vc4_hdmi_handle_hotplug() already reads EDID and propagates it to the drm_connector. Stop rereading EDID as a part of the .get_modes() callback and just update the list of modes. This matches the behaviour of the i915 driver. Acked-by: Maxime Ripard <mripard@kernel.org> Tested-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241224-drm-bridge-hdmi-connector-v10-9-dc89577cd438@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2025-01-04drm/vc4: hdmi: switch to using generic HDMI Codec infrastructureDmitry Baryshkov
Drop driver-specific implementation and use the generic HDMI Codec framework in order to implement the HDMI audio support. Acked-by: Maxime Ripard <mripard@kernel.org> Tested-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241224-drm-bridge-hdmi-connector-v10-8-dc89577cd438@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2025-01-04drm/bridge_connector: hook drm_atomic_helper_connector_hdmi_hotplug()Dmitry Baryshkov
Extend drm_bridge_connector code to read the EDID and use it to update connector status if the bridge chain implements HDMI bridge. Performing it from the generic location minimizes individual bridge's code and enforces standard behaviour from all corresponding drivers. Reviewed-by: Maxime Ripard <mripard@kernel.org> Tested-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241224-drm-bridge-hdmi-connector-v10-7-dc89577cd438@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2025-01-04drm/display/hdmi: implement hotplug functionsDmitry Baryshkov
The HDMI Connectors need to perform a variety of tasks when the HDMI connector state changes. Such tasks include setting or invalidating CEC address, notifying HDMI codec driver, updating scrambler data, etc. Implementing such tasks in a driver-specific callbacks is error prone. Start implementing the generic helper function (currently handling only the HDMI Codec framework) to be used by drivers utilizing HDMI Connector framework. Reviewed-by: Maxime Ripard <mripard@kernel.org> Tested-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241224-drm-bridge-hdmi-connector-v10-6-dc89577cd438@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2025-01-04drm/bridge: lt9611: switch to using the DRM HDMI codec frameworkDmitry Baryshkov
Make the Lontium LT9611 DSI-to-HDMI bridge driver use the DRM HDMI Codec framework. This enables programming of Audio InfoFrames using the HDMI Connector interface and also enables support for the missing features, including the ELD retrieval and better hotplug support. Reviewed-by: Maxime Ripard <mripard@kernel.org> Tested-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241224-drm-bridge-hdmi-connector-v10-5-dc89577cd438@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2025-01-04drm/bridge: connector: add support for HDMI codec frameworkDmitry Baryshkov
Add necessary glue code to be able to use new HDMI codec framework from the DRM bridge drivers. The drm_bridge implements a limited set of the hdmi_codec_ops interface, with the functions accepting both drm_connector and drm_bridge instead of just a generic void pointer. This framework is integrated with the DRM HDMI Connector framework, but can also be used for DisplayPort connectors. Reviewed-by: Maxime Ripard <mripard@kernel.org> Tested-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241224-drm-bridge-hdmi-connector-v10-4-dc89577cd438@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2025-01-04drm/connector: implement generic HDMI audio helpersDmitry Baryshkov
Several DRM drivers implement HDMI codec support (despite its name it applies to both HDMI and DisplayPort drivers). Implement generic framework to be used by these drivers. This removes a requirement to implement get_eld() callback and provides default implementation for codec's plug handling. Acked-by: Maxime Ripard <mripard@kernel.org> Tested-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241224-drm-bridge-hdmi-connector-v10-3-dc89577cd438@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2025-01-04ASoC: hdmi-codec: move no_capture_mute to struct hdmi_codec_pdataDmitry Baryshkov
The no_capture_mute flag might differ from platform to platform, especially in the case of the wrapping implementations, like the upcoming DRM HDMI Codec framework. Move the flag next to all other flags in struct hdmi_codec_pdata. Acked-by: Mark Brown <broonie@kernel.org> Tested-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241224-drm-bridge-hdmi-connector-v10-2-dc89577cd438@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2025-01-04ASoC: hdmi-codec: pass data to get_dai_id tooDmitry Baryshkov
The upcoming DRM connector HDMI codec implementation is going to use codec-specific data in the .get_dai_id to get drm_connector. Pass data to the callback, as it is done with other hdmi_codec_ops callbacks. Acked-by: Mark Brown <broonie@kernel.org> Tested-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241224-drm-bridge-hdmi-connector-v10-1-dc89577cd438@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2025-01-03accel/amdxdna: Declare npu6_dev_priv as staticLizhi Hou
Fix sparse warning: symbol 'npu6_dev_priv' was not declared. Should it be static? Fixes: 273b5176ac17 ("accel/amdxdna: Add RyzenAI-npu6 support") Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202412311819.9mz11Uak-lkp@intel.com/ Signed-off-by: Lizhi Hou <lizhi.hou@amd.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250102212244.1586340-7-lizhi.hou@amd.com
2025-01-03accel/amdxdna: Add __user to second parameter of aie2_query_statusLizhi Hou
The second parameter of aie2_query_status() is a userspace pointer. Declaring it as 'char __user *' to fix sparse warning. Fixes: 850d71f6bf4c ("accel/amdxdna: Add query functions") Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202412311655.YBvq2wJb-lkp@intel.com/ Signed-off-by: Lizhi Hou <lizhi.hou@amd.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250102212244.1586340-6-lizhi.hou@amd.com
2025-01-03accel/amdxdna: Declare force_cmdlist as staticLizhi Hou
Fix sparse warning: symbol 'force_cmdlist' was not declared. Should it be static? Fixes: aac243092b70 ("accel/amdxdna: Add command execution") Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202412311448.GKQj7uPZ-lkp@intel.com/ Signed-off-by: Lizhi Hou <lizhi.hou@amd.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250102212244.1586340-5-lizhi.hou@amd.com
generated by cgit (git 2.34.1) at 2025-10-02 06:07:51 +0000