summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2023-11-27iommu/vt-d: Add MTL to quirk list to skip TE disablingAbdul Halim, Mohd Syazwan
The VT-d spec requires (10.4.4 Global Command Register, TE field) that: Hardware implementations supporting DMA draining must drain any in-flight DMA read/write requests queued within the Root-Complex before switching address translation on or off and reflecting the status of the command through the TES field in the Global Status register. Unfortunately, some integrated graphic devices fail to do so after some kind of power state transition. As the result, the system might stuck in iommu_disable_translation(), waiting for the completion of TE transition. Add MTL to the quirk list for those devices and skips TE disabling if the qurik hits. Fixes: b1012ca8dc4f ("iommu/vt-d: Skip TE disabling on quirky gfx dedicated iommu") Cc: stable@vger.kernel.org Signed-off-by: Abdul Halim, Mohd Syazwan <mohd.syazwan.abdul.halim@intel.com> Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Link: https://lore.kernel.org/r/20231116022324.30120-1-baolu.lu@linux.intel.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2023-11-27iommu/vt-d: Make context clearing consistent with context mappingLu Baolu
In the iommu probe_device path, domain_context_mapping() allows setting up the context entry for a non-PCI device. However, in the iommu release_device path, domain_context_clear() only clears context entries for PCI devices. Make domain_context_clear() behave consistently with domain_context_mapping() by clearing context entries for both PCI and non-PCI devices. Fixes: 579305f75d34 ("iommu/vt-d: Update to use PCI DMA aliases") Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Reviewed-by: Kevin Tian <kevin.tian@intel.com> Link: https://lore.kernel.org/r/20231114011036.70142-4-baolu.lu@linux.intel.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2023-11-27iommu/vt-d: Disable PCI ATS in legacy passthrough modeLu Baolu
When IOMMU hardware operates in legacy mode, the TT field of the context entry determines the translation type, with three supported types (Section 9.3 Context Entry): - DMA translation without device TLB support - DMA translation with device TLB support - Passthrough mode with translated and translation requests blocked Device TLB support is absent when hardware is configured in passthrough mode. Disable the PCI ATS feature when IOMMU is configured for passthrough translation type in legacy (non-scalable) mode. Fixes: 0faa19a1515f ("iommu/vt-d: Decouple PASID & PRI enabling from SVA") Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Reviewed-by: Kevin Tian <kevin.tian@intel.com> Link: https://lore.kernel.org/r/20231114011036.70142-3-baolu.lu@linux.intel.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2023-11-27iommu/vt-d: Omit devTLB invalidation requests when TES=0Lu Baolu
The latest VT-d spec indicates that when remapping hardware is disabled (TES=0 in Global Status Register), upstream ATS Invalidation Completion requests are treated as UR (Unsupported Request). Consequently, the spec recommends in section 4.3 Handling of Device-TLB Invalidations that software refrain from submitting any Device-TLB invalidation requests when address remapping hardware is disabled. Verify address remapping hardware is enabled prior to submitting Device- TLB invalidation requests. Fixes: 792fb43ce2c9 ("iommu/vt-d: Enable Intel IOMMU scalable mode by default") Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Reviewed-by: Kevin Tian <kevin.tian@intel.com> Link: https://lore.kernel.org/r/20231114011036.70142-2-baolu.lu@linux.intel.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2023-11-27iommu/vt-d: Support enforce_cache_coherency only for empty domainsLu Baolu
The enforce_cache_coherency callback ensures DMA cache coherency for devices attached to the domain. Intel IOMMU supports enforced DMA cache coherency when the Snoop Control bit in the IOMMU's extended capability register is set. Supporting it differs between legacy and scalable modes. In legacy mode, it's supported page-level by setting the SNP field in second-stage page-table entries. In scalable mode, it's supported in PASID-table granularity by setting the PGSNP field in PASID-table entries. In legacy mode, mappings before attaching to a device have SNP fields cleared, while mappings after the callback have them set. This means partial DMAs are cache coherent while others are not. One possible fix is replaying mappings and flipping SNP bits when attaching a domain to a device. But this seems to be over-engineered, given that all real use cases just attach an empty domain to a device. To meet practical needs while reducing mode differences, only support enforce_cache_coherency on a domain without mappings if SNP field is used. Fixes: fc0051cb9590 ("iommu/vt-d: Check domain force_snooping against attached devices") Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Reviewed-by: Kevin Tian <kevin.tian@intel.com> Link: https://lore.kernel.org/r/20231114011036.70142-1-baolu.lu@linux.intel.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2023-11-27iommu: Avoid more races around device probeRobin Murphy
It turns out there are more subtle races beyond just the main part of __iommu_probe_device() itself running in parallel - the dev_iommu_free() on the way out of an unsuccessful probe can still manage to trip up concurrent accesses to a device's fwspec. Thus, extend the scope of iommu_probe_device_lock() to also serialise fwspec creation and initial retrieval. Reported-by: Zhenhua Huang <quic_zhenhuah@quicinc.com> Link: https://lore.kernel.org/linux-iommu/e2e20e1c-6450-4ac5-9804-b0000acdf7de@quicinc.com/ Fixes: 01657bc14a39 ("iommu: Avoid races around device probe") Signed-off-by: Robin Murphy <robin.murphy@arm.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: André Draszik <andre.draszik@linaro.org> Tested-by: André Draszik <andre.draszik@linaro.org> Link: https://lore.kernel.org/r/16f433658661d7cadfea51e7c65da95826112a2b.1700071477.git.robin.murphy@arm.com Cc: stable@vger.kernel.org Signed-off-by: Joerg Roedel <jroedel@suse.de>
2023-11-27iommu: Flow ERR_PTR out from __iommu_domain_alloc()Jason Gunthorpe
Most of the calling code now has error handling that can carry an error code further up the call chain. Keep the exported interface iommu_domain_alloc() returning NULL and reflow the internal code to use ERR_PTR not NULL for domain allocation failure. Optionally allow drivers to return ERR_PTR from any of the alloc ops. Many of the new ops (user, sva, etc) already return ERR_PTR, so having two rules is confusing and hard on drivers. This fixes a bug in DART that was returning ERR_PTR. Fixes: 482feb5c6492 ("iommu/dart: Call apple_dart_finalize_domain() as part of alloc_paging()") Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Link: https://lore.kernel.org/linux-iommu/b85e0715-3224-4f45-ad6b-ebb9f08c015d@moroto.mountain/ Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com> Link: https://lore.kernel.org/r/0-v2-55ae413017b8+97-domain_alloc_err_ptr_jgg@nvidia.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2023-11-26dpaa2-eth: recycle the RX buffer only after all processing doneIoana Ciornei
The blamed commit added support for Rx copybreak. This meant that for certain frame sizes, a new skb was allocated and the initial data buffer was recycled. Instead of waiting to recycle the Rx buffer only after all processing was done on it (like accessing the parse results or timestamp information), the code path just went ahead and re-used the buffer right away. This sometimes lead to corrupted HW and SW annotation areas. Fix this by delaying the moment when the buffer is recycled. Fixes: 50f826999a80 ("dpaa2-eth: add rx copybreak support") Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-11-26dpaa2-eth: increase the needed headroom to account for alignmentIoana Ciornei
Increase the needed headroom to account for a 64 byte alignment restriction which, with this patch, we make mandatory on the Tx path. The case in which the amount of headroom needed is not available is already handled by the driver which instead sends a S/G frame with the first buffer only holding the SW and HW annotation areas. Without this patch, we can empirically see data corruption happening between Tx and Tx confirmation which sometimes leads to the SW annotation area being overwritten. Since this is an old IP where the hardware team cannot help to understand the underlying behavior, we make the Tx alignment mandatory for all frames to avoid the crash on Tx conf. Also, remove the comment that suggested that this is just an optimization. This patch also sets the needed_headroom net device field to the usual value that the driver would need on the Tx path: - 64 bytes for the software annotation area - 64 bytes to account for a 64 byte aligned buffer address Fixes: 6e2387e8f19e ("staging: fsl-dpaa2/eth: Add Freescale DPAA2 Ethernet driver") Closes: https://lore.kernel.org/netdev/aa784d0c-85eb-4e5d-968b-c8f74fa86be6@gin.de/ Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-11-26net: dsa: mv88e6xxx: fix marvell 6350 probe crashGreg Ungerer
As of commit b92143d4420f ("net: dsa: mv88e6xxx: add infrastructure for phylink_pcs") probing of a Marvell 88e6350 switch causes a NULL pointer de-reference like this example: ... mv88e6085 d0072004.mdio-mii:11: switch 0x3710 detected: Marvell 88E6350, revision 2 8<--- cut here --- Unable to handle kernel NULL pointer dereference at virtual address 00000000 when read [00000000] *pgd=00000000 Internal error: Oops: 5 [#1] ARM Modules linked in: CPU: 0 PID: 8 Comm: kworker/u2:0 Not tainted 6.7.0-rc2-dirty #26 Hardware name: Marvell Armada 370/XP (Device Tree) Workqueue: events_unbound deferred_probe_work_func PC is at mv88e6xxx_port_setup+0x1c/0x44 LR is at dsa_port_devlink_setup+0x74/0x154 pc : [<c057ea24>] lr : [<c0819598>] psr: a0000013 sp : c184fce0 ip : c542b8f4 fp : 00000000 r10: 00000001 r9 : c542a540 r8 : c542bc00 r7 : c542b838 r6 : c5244580 r5 : 00000005 r4 : c5244580 r3 : 00000000 r2 : c542b840 r1 : 00000005 r0 : c1a02040 ... The Marvell 6350 switch has no SERDES interface and so has no corresponding pcs_ops defined for it. But during probing a call is made to mv88e6xxx_port_setup() which unconditionally expects pcs_ops to exist - though the presence of the pcs_ops->pcs_init function is optional. Modify code to check for pcs_ops first, before checking for and calling pcs_ops->pcs_init. Modify checking and use of pcs_ops->pcs_teardown which may potentially suffer the same problem. Fixes: b92143d4420f ("net: dsa: mv88e6xxx: add infrastructure for phylink_pcs") Signed-off-by: Greg Ungerer <gerg@kernel.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-11-26net: dsa: mv88e6xxx: fix marvell 6350 switch probingGreg Ungerer
As of commit de5c9bf40c45 ("net: phylink: require supported_interfaces to be filled") Marvell 88e6350 switches fail to be probed: ... mv88e6085 d0072004.mdio-mii:11: switch 0x3710 detected: Marvell 88E6350, revision 2 mv88e6085 d0072004.mdio-mii:11: phylink: error: empty supported_interfaces error creating PHYLINK: -22 mv88e6085: probe of d0072004.mdio-mii:11 failed with error -22 ... The problem stems from the use of mv88e6185_phylink_get_caps() to get the device capabilities. Create a new dedicated phylink_get_caps for the 6351 family (which the 6350 is one of) to properly support their set of capabilities. According to chip.h the 6351 switch family includes the 6171, 6175, 6350 and 6351 switches, so update each of these to use the correct phylink_get_caps. Fixes: de5c9bf40c45 ("net: phylink: require supported_interfaces to be filled") Signed-off-by: Greg Ungerer <gerg@kernel.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-11-25Merge tag 'usb-6.7-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB / PHY / Thunderbolt fixes from Greg KH: "Here are a number of reverts, fixes, and new device ids for 6.7-rc3 for the USB, PHY, and Thunderbolt driver subsystems. Include in here are: - reverts of some PHY drivers that went into 6.7-rc1 that shouldn't have been merged yet, the author is reworking them based on review comments as they were using older apis that shouldn't be used anymore for newer drivers - small thunderbolt driver fixes for reported issues - USB driver fixes for a variety of small issues in dwc3, typec, xhci, and other smaller drivers. - new device ids for usb-serial and onboard_usb_hub drivers. All of these have been in linux-next with no reported issues" * tag 'usb-6.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (33 commits) USB: serial: option: add Luat Air72*U series products USB: dwc3: qcom: fix ACPI platform device leak USB: dwc3: qcom: fix software node leak on probe errors USB: dwc3: qcom: fix resource leaks on probe deferral USB: dwc3: qcom: simplify wakeup interrupt setup USB: dwc3: qcom: fix wakeup after probe deferral dt-bindings: usb: qcom,dwc3: fix example wakeup interrupt types usb: misc: onboard-hub: add support for Microchip USB5744 dt-bindings: usb: microchip,usb5744: Add second supply usb: misc: ljca: Fix enumeration error on Dell Latitude 9420 USB: serial: option: add Fibocom L7xx modules USB: xhci-plat: fix legacy PHY double init usb: typec: tipd: Supply also I2C driver data usb: xhci-mtk: fix in-ep's start-split check failure usb: dwc3: set the dma max_seg_size usb: config: fix iteration issue in 'usb_get_bos_descriptor()' usb: dwc3: add missing of_node_put and platform_device_put USB: dwc2: write HCINT with INTMASK applied usb: misc: ljca: Drop _ADR support to get ljca children devices usb: cdnsp: Fix deadlock issue during using NCM gadget ...
2023-11-25Merge tag 'for-linus-6.7a-rc3-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen fixes from Juergen Gross: - A small cleanup patch for the Xen privcmd driver - A fix for the swiotlb-xen driver which was missing the advertising of the maximum mapping length - A fix for Xen on Arm for a longstanding bug, which happened to occur only recently: a structure in percpu memory crossed a page boundary, which was rejected by the hypervisor * tag 'for-linus-6.7a-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: arm/xen: fix xen_vcpu_info allocation alignment xen: privcmd: Replace zero-length array with flex-array member and use __counted_by swiotlb-xen: provide the "max_mapping_size" method
2023-11-24scsi: sd: Fix system start for ATA devicesDamien Le Moal
It is not always possible to keep a device in the runtime suspended state when a system level suspend/resume cycle is executed. E.g. for ATA devices connected to AHCI adapters, system resume resets the ATA ports, which causes connected devices to spin up. In such case, a runtime suspended disk will incorrectly be seen with a suspended runtime state because the device is not resumed by sd_resume_system(). The power state seen by the user is different than the actual device physical power state. Fix this issue by introducing the struct scsi_device flag force_runtime_start_on_system_start. When set, this flag causes sd_resume_system() to request a runtime resume operation for runtime suspended devices. This results in the user seeing the device runtime_state as active after a system resume, thus correctly reflecting the device physical power state. Fixes: 9131bff6a9f1 ("scsi: core: pm: Only runtime resume if necessary") Cc: <stable@vger.kernel.org> Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Link: https://lore.kernel.org/r/20231120225631.37938-3-dlemoal@kernel.org Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-11-24scsi: Change SCSI device boolean fields to single bit flagsDamien Le Moal
Commit 3cc2ffe5c16d ("scsi: sd: Differentiate system and runtime start/stop management") changed the single bit manage_start_stop flag into 2 boolean fields of the SCSI device structure. Commit 24eca2dce0f8 ("scsi: sd: Introduce manage_shutdown device flag") introduced the manage_shutdown boolean field for the same structure. Together, these 2 commits increase the size of struct scsi_device by 8 bytes by using booleans instead of defining the manage_xxx fields as single bit flags, similarly to other flags of this structure. Avoid this unnecessary structure size increase and be consistent with the definition of other flags by reverting the definitions of the manage_xxx fields as single bit flags. Fixes: 3cc2ffe5c16d ("scsi: sd: Differentiate system and runtime start/stop management") Fixes: 24eca2dce0f8 ("scsi: sd: Introduce manage_shutdown device flag") Cc: <stable@vger.kernel.org> Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Link: https://lore.kernel.org/r/20231120225631.37938-2-dlemoal@kernel.org Reviewed-by: Niklas Cassel <niklas.cassel@wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-11-24scsi: ufs: core: Clear cmd if abort succeeds in MCQ modePeter Wang
In MCQ mode, if cmd is pending in device and abort succeeds, response will not be returned by device. So we need clear the cmd, otherwise timeout will happen and next time we use same tag we will get a WARN_ON(lrbp->cmd). Below is error log: <3>[ 2277.447611][T21376] ufshcd-mtk 112b0000.ufshci: ufshcd_try_to_abort_task: cmd pending in the device. tag = 7 <3>[ 2277.476954][T21376] ufshcd-mtk 112b0000.ufshci: Aborting tag 7 / CDB 0x2a succeeded <6>[ 2307.551263][T30974] ufshcd-mtk 112b0000.ufshci: ufshcd_abort: Device abort task at tag 7 <4>[ 2307.623264][ T327] WARNING: CPU: 5 PID: 327 at source/drivers/ufs/core/ufshcd.c:3021 ufshcd_queuecommand+0x66c/0xe34 Fixes: ab248643d3d6 ("scsi: ufs: core: Add error handling for MCQ mode") Cc: <stable@vger.kernel.org> Signed-off-by: Peter Wang <peter.wang@mediatek.com> Link: https://lore.kernel.org/r/20231115131024.15829-1-peter.wang@mediatek.com Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-11-25drm/bridge: panel: Check device dependency before managing device linkLiu Ying
Some panel devices already depend on DRM device, like the panel in arch/arm/boot/dts/st/ste-ux500-samsung-skomer.dts, because DRM device is the ancestor of those panel devices. device_link_add() would fail by returning a NULL pointer for those panel devices because of the existing dependency. So, check the dependency by calling device_is_dependent() before adding or deleting device link between panel device and DRM device so that the link is managed only for independent panel devices. Fixes: 887878014534 ("drm/bridge: panel: Fix device link for DRM_BRIDGE_ATTACH_NO_CONNECTOR") Fixes: 199cf07ebd2b ("drm/bridge: panel: Add a device link between drm device and panel device") Reported-by: Linus Walleij <linus.walleij@linaro.org> Closes: https://lore.kernel.org/lkml/CACRpkdaGzXD6HbiX7mVUNJAJtMEPG00Pp6+nJ1P0JrfJ-ArMvQ@mail.gmail.com/T/ Tested-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Liu Ying <victor.liu@nxp.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20231123032615.3760488-1-victor.liu@nxp.com
2023-11-24Merge tag 'acpi-6.7-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI fixes from Rafael Wysocki: "These add an ACPI IRQ override quirk for ASUS ExpertBook B1402CVA and fix an ACPI processor idle issue leading to triple-faults in Xen HVM guests and an ACPI backlight driver issue that causes GPUs to misbehave while their children power is being fixed up. Specifics: - Avoid powering up GPUs while attempting to fix up power for their children (Hans de Goede) - Use raw_safe_halt() instead of safe_halt() in acpi_idle_play_dead() so as to avoid triple-falts during CPU online in Xen HVM guests due to the setting of the hardirqs_enabled flag in safe_halt() (David Woodhouse) - Add an ACPI IRQ override quirk for ASUS ExpertBook B1402CVA (Hans de Goede)" * tag 'acpi-6.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI: resource: Skip IRQ override on ASUS ExpertBook B1402CVA ACPI: video: Use acpi_device_fix_up_power_children() ACPI: PM: Add acpi_device_fix_up_power_children() function ACPI: processor_idle: use raw_safe_halt() in acpi_idle_play_dead()
2023-11-24Merge branches 'acpi-video' and 'acpi-processor' into acpiRafael J. Wysocki
Merge ACPI backlight driver fixes and an ACPI processor driver fix for 6.7-rc3: - Avoid powering up GPUs while attempting to fix up power for their children (Hans de Goede). - Use raw_safe_halt() instead of safe_halt() in acpi_idle_play_dead() so as to avoid triple-falts during CPU online in Xen HVM guests due to the setting of the hardirqs_enabled flag in safe_halt() (David Woodhouse). * acpi-video: ACPI: video: Use acpi_device_fix_up_power_children() ACPI: PM: Add acpi_device_fix_up_power_children() function * acpi-processor: ACPI: processor_idle: use raw_safe_halt() in acpi_idle_play_dead()
2023-11-24Merge tag 'drm-fixes-2023-11-24' of git://anongit.freedesktop.org/drm/drmLinus Torvalds
Pull drm fixes from Dave Airlie: "Back to regular scheduled fixes pull request, mainly a bunch of msm, some i915 and otherwise a few scattered, one memory crasher in the nouveau GSP paths is helping stabilise that work. msm: - Fix the VREG_CTRL_1 for 4nm CPHY to match downstream - Remove duplicate call to drm_kms_helper_poll_init() in msm_drm_init() - Fix the safe_lut_tbl[] for sc8280xp to match downstream - Don't attach the drm_dp_set_subconnector_property() for eDP - Fix to attach drm_dp_set_subconnector_property() for DP. Otherwise there is a bootup crash on multiple targets - Remove unnecessary NULL check left behind during cleanup i915: - Fix race between DP MST connectore registration and setup - Fix GT memory leak on probe error path panel: - Fixes for innolux and auo,b101uan08.3 panel. - Fix Himax83102-j02 timings. ivpu: - Fix ivpu MMIO reset. ast: - AST fix on connetor disconnection. nouveau: - gsp memory corruption fix rockchip: - color fix" * tag 'drm-fixes-2023-11-24' of git://anongit.freedesktop.org/drm/drm: nouveau/gsp: allocate enough space for all channel ids. drm/panel: boe-tv101wum-nl6: Fine tune Himax83102-j02 panel HFP and HBP drm/ast: Disconnect BMC if physical connector is connected accel/ivpu/37xx: Fix hangs related to MMIO reset drm/rockchip: vop: Fix color for RGB888/BGR888 format on VOP full drm/i915: do not clean GT table on error path drm/i915/dp_mst: Fix race between connector registration and setup drm/panel: simple: Fix Innolux G101ICE-L01 timings drm/panel: simple: Fix Innolux G101ICE-L01 bus flags drm/msm: remove unnecessary NULL check drm/panel: auo,b101uan08.3: Fine tune the panel power sequence drm/msm/dp: attach the DP subconnector property drm/msm/dp: don't touch DP subconnector property in eDP case drm/msm/dpu: Add missing safe_lut_tbl in sc8280xp catalog drm/msm: remove exra drm_kms_helper_poll_init() call drm/msm/dsi: use the correct VREG_CTRL_1 value for 4nm cphy
2023-11-24wifi: iwlwifi: mvm: fix an error code in iwl_mvm_mld_add_sta()Dan Carpenter
This error path should return -EINVAL instead of success. Fixes: 57974a55d995 ("wifi: iwlwifi: mvm: refactor iwl_mvm_mac_sta_state_common()") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Acked-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/75e4ea09-db58-462f-bd4e-5ad4e5e5dcb5@moroto.mountain Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-11-24bcache: revert replacing IS_ERR_OR_NULL with IS_ERRMarkus Weippert
Commit 028ddcac477b ("bcache: Remove unnecessary NULL point check in node allocations") replaced IS_ERR_OR_NULL by IS_ERR. This leads to a NULL pointer dereference. BUG: kernel NULL pointer dereference, address: 0000000000000080 Call Trace: ? __die_body.cold+0x1a/0x1f ? page_fault_oops+0xd2/0x2b0 ? exc_page_fault+0x70/0x170 ? asm_exc_page_fault+0x22/0x30 ? btree_node_free+0xf/0x160 [bcache] ? up_write+0x32/0x60 btree_gc_coalesce+0x2aa/0x890 [bcache] ? bch_extent_bad+0x70/0x170 [bcache] btree_gc_recurse+0x130/0x390 [bcache] ? btree_gc_mark_node+0x72/0x230 [bcache] bch_btree_gc+0x5da/0x600 [bcache] ? cpuusage_read+0x10/0x10 ? bch_btree_gc+0x600/0x600 [bcache] bch_gc_thread+0x135/0x180 [bcache] The relevant code starts with: new_nodes[0] = NULL; for (i = 0; i < nodes; i++) { if (__bch_keylist_realloc(&keylist, bkey_u64s(&r[i].b->key))) goto out_nocoalesce; // ... out_nocoalesce: // ... for (i = 0; i < nodes; i++) if (!IS_ERR(new_nodes[i])) { // IS_ERR_OR_NULL before 028ddcac477b btree_node_free(new_nodes[i]); // new_nodes[0] is NULL rw_unlock(true, new_nodes[i]); } This patch replaces IS_ERR() by IS_ERR_OR_NULL() to fix this. Fixes: 028ddcac477b ("bcache: Remove unnecessary NULL point check in node allocations") Link: https://lore.kernel.org/all/3DF4A87A-2AC1-4893-AE5F-E921478419A9@suse.de/ Cc: stable@vger.kernel.org Cc: Zheng Wang <zyytlz.wz@163.com> Cc: Coly Li <colyli@suse.de> Signed-off-by: Markus Weippert <markus@gekmihesg.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-11-24Merge tag 'usb-serial-6.7-rc3' of ↵Greg Kroah-Hartman
https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus Johan writes: USB-serial fixes for 6.7-rc3 Here are a couple of modem device entry fixes and some new modem device ids. All have been in linux-next with no reported issues. * tag 'usb-serial-6.7-rc3' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial: (329 commits) USB: serial: option: add Luat Air72*U series products USB: serial: option: add Fibocom L7xx modules USB: serial: option: fix FM101R-GL defines USB: serial: option: don't claim interface 4 for ZTE MF290 Linux 6.7-rc2 prctl: Disable prctl(PR_SET_MDWE) on parisc parisc/power: Fix power soft-off when running on qemu parisc: Replace strlcpy() with strscpy() NFSD: Fix checksum mismatches in the duplicate reply cache NFSD: Fix "start of NFS reply" pointer passed to nfsd_cache_update() NFSD: Update nfsd_cache_append() to use xdr_stream nfsd: fix file memleak on client_opens_release dm-crypt: start allocating with MAX_ORDER dm-verity: don't use blocking calls from tasklets dm-bufio: fix no-sleep mode dm-delay: avoid duplicate logic dm-delay: fix bugs introduced by kthread mode dm-delay: fix a race between delay_presuspend and delay_bio drm/amdgpu/gmc9: disable AGP aperture drm/amdgpu/gmc10: disable AGP aperture ...
2023-11-24pinctrl: realtek: Fix logical error when finding descriptorTzuyi Chang
The pin descriptor should be returned if the name has been found in the descriptor table. Remove the negation in the if statement for accurate retrieval. Fixes: e99ce78030db ("pinctrl: realtek: Add common pinctrl driver for Realtek DHC RTD SoCs") Signed-off-by: Tzuyi Chang <tychang@realtek.com> Link: https://lore.kernel.org/r/20231121091107.5564-1-tychang@realtek.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2023-11-24closures: CLOSURE_CALLBACK() to fix type punningKent Overstreet
Control flow integrity is now checking that type signatures match on indirect function calls. That breaks closures, which embed a work_struct in a closure in such a way that a closure_fn may also be used as a workqueue fn by the underlying closure code. So we have to change closure fns to take a work_struct as their argument - but that results in a loss of clarity, as closure fns have different semantics from normal workqueue functions (they run owning a ref on the closure, which must be released with continue_at() or closure_return()). Thus, this patc introduces CLOSURE_CALLBACK() and closure_type() macros as suggested by Kees, to smooth things over a bit. Suggested-by: Kees Cook <keescook@chromium.org> Cc: Coly Li <colyli@suse.de> Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2023-11-24net: rswitch: Fix missing dev_kfree_skb_any() in error pathYoshihiro Shimoda
Before returning the rswitch_start_xmit() in the error path, dev_kfree_skb_any() should be called. So, fix it. Fixes: 33f5d733b589 ("net: renesas: rswitch: Improve TX timestamp accuracy") Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-11-24net: rswitch: Fix return value in rswitch_start_xmit()Yoshihiro Shimoda
This .ndo_start_xmit() function should return netdev_tx_t value, not -ENOMEM. So, fix it. Fixes: 33f5d733b589 ("net: renesas: rswitch: Improve TX timestamp accuracy") Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-11-24net: rswitch: Fix type of ret in rswitch_start_xmit()Yoshihiro Shimoda
The type of ret in rswitch_start_xmit() should be netdev_tx_t. So, fix it. Fixes: 3590918b5d07 ("net: ethernet: renesas: Add support for "Ethernet Switch"") Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-11-23Merge tag 'ata-6.7-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata Pull ata fix from Damien Le Moal: - Add a missing error check in the adapter initialization of the pata_isapnp driver (Chen) * tag 'ata-6.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata: ata: pata_isapnp: Add missing error check for devm_ioport_map()
2023-11-23Merge tag 'block-6.7-2023-11-23' of git://git.kernel.dk/linuxLinus Torvalds
Pull block fixes from Jens Axboe: "A bit bigger than usual at this time, but nothing really earth shattering: - NVMe pull request via Keith: - TCP TLS fixes (Hannes) - Authentifaction fixes (Mark, Hannes) - Properly terminate target names (Christoph) - MD pull request via Song, fixing a raid5 corruption issue - Disentanglement of the dependency mess in nvme introduced with the tls additions. Now it should actually build on all configs (Arnd) - Series of bcache fixes (Coly) - Removal of a dead helper (Damien) - s390 dasd fix (Muhammad, Jan) - lockdep blk-cgroup fixes (Ming)" * tag 'block-6.7-2023-11-23' of git://git.kernel.dk/linux: (33 commits) nvme: tcp: fix compile-time checks for TLS mode nvme: target: fix Kconfig select statements nvme: target: fix nvme_keyring_id() references nvme: move nvme_stop_keep_alive() back to original position nbd: pass nbd_sock to nbd_read_reply() instead of index s390/dasd: protect device queue against concurrent access s390/dasd: resolve spelling mistake block/null_blk: Fix double blk_mq_start_request() warning nvmet-tcp: always initialize tls_handshake_tmo_work nvmet: nul-terminate the NQNs passed in the connect command nvme: blank out authentication fabrics options if not configured nvme: catch errors from nvme_configure_metadata() nvme-tcp: only evaluate 'tls' option if TLS is selected nvme-auth: set explanation code for failure2 msgs nvme-auth: unlock mutex in one place only block: Remove blk_set_runtime_active() nbd: fix null-ptr-dereference while accessing 'nbd->config' nbd: factor out a helper to get nbd_config without holding 'config_lock' nbd: fold nbd config initialization into nbd_alloc_config() bcache: avoid NULL checking to c->root in run_cache_set() ...
2023-11-23Merge tag 'for-linus-2023112301' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid Pull HID fixes from Jiri Kosina: - revert of commit that caused regression to many Logitech unifying receiver users (Jiri Kosina) - power management fix for hid-mcp2221 (Hamish Martin) - fix for race condition between HID core and HID debug (Charles Yi) - a couple of assorted device-ID-specific quirks * tag 'for-linus-2023112301' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: HID: multitouch: Add quirk for HONOR GLO-GXXX touchpad HID: hid-asus: reset the backlight brightness level on resume HID: hid-asus: add const to read-only outgoing usb buffer Revert "HID: logitech-dj: Add support for a new lightspeed receiver iteration" HID: add ALWAYS_POLL quirk for Apple kb HID: glorious: fix Glorious Model I HID report HID: fix HID device resource race between HID core and debugging support HID: apple: add Jamesdonkey and A3R to non-apple keyboards list HID: mcp2221: Allow IO to start during probe HID: mcp2221: Set driver data before I2C adapter add
2023-11-24Merge tag 'drm-intel-fixes-2023-11-23' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes drm/i915 fixes for v6.7-rc3: - Fix race between DP MST connectore registration and setup - Fix GT memory leak on probe error path Signed-off-by: Dave Airlie <airlied@redhat.com> From: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/87y1eol98h.fsf@intel.com
2023-11-24Merge tag 'drm-misc-fixes-2023-11-23' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes Fixes for v6.7-rc3: - Panel fixes for innolux and auo,b101uan08.3 panel. - Fix ivpu MMIO reset. - AST fix on connetor disconnection. - nouveau gsp fix. - rockchip color fix. - Fix Himax83102-j02 timings. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/12322257-2e0c-43d3-8241-876aafc10e4a@linux.intel.com
2023-11-24Merge tag 'drm-msm-fixes-2023-11-21' of ↵Dave Airlie
https://gitlab.freedesktop.org/drm/msm into drm-fixes Fixes for v6.7-rc3: - Fix the VREG_CTRL_1 for 4nm CPHY to match downstream - Remove duplicate call to drm_kms_helper_poll_init() in msm_drm_init() - Fix the safe_lut_tbl[] for sc8280xp to match downstream - Don't attach the drm_dp_set_subconnector_property() for eDP - Fix to attach drm_dp_set_subconnector_property() for DP. Otherwise there is a bootup crash on multiple targets - Remove unnecessary NULL check left behind during cleanup Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rob Clark <robdclark@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGtkna3P3mvaF53n2ARJACaXQU+OFfShayTrsUVmqCOmNQ@mail.gmail.com
2023-11-23netdevsim: Don't accept device bound programsStanislav Fomichev
Commit 2b3486bc2d23 ("bpf: Introduce device-bound XDP programs") introduced device-bound programs by largely reusing existing offloading infrastructure. This changed the semantics of 'prog->aux->offload' a bit. Now, it's non-NULL for both offloaded and device-bound programs. Instead of looking at 'prog->aux->offload' let's call bpf_prog_is_offloaded which should be true iff the program is offloaded and not merely device-bound. Fixes: 2b3486bc2d23 ("bpf: Introduce device-bound XDP programs") Reported-by: syzbot+44c2416196b7c607f226@syzkaller.appspotmail.com Signed-off-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Cc: Dipendra Khadka <kdipendra88@gmail.com> Link: https://lore.kernel.org/bpf/20231114045453.1816995-2-sdf@google.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-11-23Merge tag 'net-6.7-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Including fixes from bpf. Current release - regressions: - Revert "net: r8169: Disable multicast filter for RTL8168H and RTL8107E" - kselftest: rtnetlink: fix ip route command typo Current release - new code bugs: - s390/ism: make sure ism driver implies smc protocol in kconfig - two build fixes for tools/net Previous releases - regressions: - rxrpc: couple of ACK/PING/RTT handling fixes Previous releases - always broken: - bpf: verify bpf_loop() callbacks as if they are called unknown number of times - improve stability of auto-bonding with Hyper-V - account BPF-neigh-redirected traffic in interface statistics Misc: - net: fill in some more MODULE_DESCRIPTION()s" * tag 'net-6.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (58 commits) tools: ynl: fix duplicate op name in devlink tools: ynl: fix header path for nfsd net: ipa: fix one GSI register field width tls: fix NULL deref on tls_sw_splice_eof() with empty record net: axienet: Fix check for partial TX checksum vsock/test: fix SEQPACKET message bounds test i40e: Fix adding unsupported cloud filters ice: restore timestamp configuration after device reset ice: unify logic for programming PFINT_TSYN_MSK ice: remove ptp_tx ring parameter flag amd-xgbe: propagate the correct speed and duplex status amd-xgbe: handle the corner-case during tx completion amd-xgbe: handle corner-case during sfp hotplug net: veth: fix ethtool stats reporting octeontx2-pf: Fix ntuple rule creation to direct packet to VF with higher Rx queue than its PF net: usb: qmi_wwan: claim interface 4 for ZTE MF290 Revert "net: r8169: Disable multicast filter for RTL8168H and RTL8107E" net/smc: avoid data corruption caused by decline nfc: virtual_ncidev: Add variable to check if ndev is running dpll: Fix potential msg memleak when genlmsg_put_reply failed ...
2023-11-23USB: serial: option: add Luat Air72*U series productsAsuna Yang
Update the USB serial option driver support for Luat Air72*U series products. ID 1782:4e00 Spreadtrum Communications Inc. UNISOC-8910 T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 13 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1782 ProdID=4e00 Rev=00.00 S: Manufacturer=UNISOC S: Product=UNISOC-8910 C: #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=400mA I: If#= 0 Alt= 0 #EPs= 1 Cls=e0(wlcon) Sub=01 Prot=03 Driver=rndis_host E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=4096ms I: If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=rndis_host E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms If#= 2: AT If#= 3: PPP + AT If#= 4: Debug Co-developed-by: Yangyu Chen <cyy@cyyself.name> Signed-off-by: Yangyu Chen <cyy@cyyself.name> Signed-off-by: Asuna Yang <SpriteOvO@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org>
2023-11-23mmc: sdhci-sprd: Fix vqmmc not shutting down after the card was pulledWenchao Chen
With cat regulator_summary, we found that vqmmc was not shutting down after the card was pulled. cat /sys/kernel/debug/regulator/regulator_summary 1.before fix 1)Insert SD card vddsdio 1 1 0 unknown 3500mV 0mA 1200mV 3750mV 71100000.mmc-vqmmc 1 0mA 3500mV 3600mV 2)Pull out the SD card vddsdio 1 1 0 unknown 3500mV 0mA 1200mV 3750mV 71100000.mmc-vqmmc 1 0mA 3500mV 3600mV 2.after fix 1)Insert SD cardt vddsdio 1 1 0 unknown 3500mV 0mA 1200mV 3750mV 71100000.mmc-vqmmc 1 0mA 3500mV 3600mV 2)Pull out the SD card vddsdio 0 1 0 unknown 3500mV 0mA 1200mV 3750mV 71100000.mmc-vqmmc 0 0mA 3500mV 3600mV Fixes: fb8bd90f83c4 ("mmc: sdhci-sprd: Add Spreadtrum's initial host controller") Signed-off-by: Wenchao Chen <wenchao.chen@unisoc.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20231115083406.7368-1-wenchao.chen@unisoc.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2023-11-23mmc: sdhci-pci-gli: Disable LPM during initializationKornel Dulęba
To address IO performance commit f9e5b33934ce ("mmc: host: Improve I/O read/write performance for GL9763E") limited LPM negotiation to runtime suspend state. The problem is that it only flips the switch in the runtime PM resume/suspend logic. Disable LPM negotiation in gl9763e_add_host. This helps in two ways: 1. It was found that the LPM switch stays in the same position after warm reboot. Having it set in init helps with consistency. 2. Disabling LPM during the first runtime resume leaves us susceptible to the performance issue in the time window between boot and the first runtime suspend. Fixes: f9e5b33934ce ("mmc: host: Improve I/O read/write performance for GL9763E") Cc: stable@vger.kernel.org Signed-off-by: Kornel Dulęba <korneld@chromium.org> Reviewed-by: Sven van Ashbrook <svenva@chromium.org> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/20231114115516.1585361-1-korneld@chromium.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2023-11-23net: ipa: fix one GSI register field widthAlex Elder
The width of the R_LENGTH field of the EV_CH_E_CNTXT_1 GSI register is 24 bits (not 20 bits) starting with IPA v5.0. Fix this. Fixes: faf0678ec8a0 ("net: ipa: add IPA v5.0 GSI register definitions") Signed-off-by: Alex Elder <elder@linaro.org> Link: https://lore.kernel.org/r/20231122231708.896632-1-elder@linaro.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-11-23net: axienet: Fix check for partial TX checksumSamuel Holland
Due to a typo, the code checked the RX checksum feature in the TX path. Fixes: 8a3b7a252dca ("drivers/net/ethernet/xilinx: added Xilinx AXI Ethernet driver") Signed-off-by: Samuel Holland <samuel.holland@sifive.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com> Link: https://lore.kernel.org/r/20231122004219.3504219-1-samuel.holland@sifive.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-11-23i40e: Fix adding unsupported cloud filtersIvan Vecera
If a VF tries to add unsupported cloud filter through virtchnl then i40e_add_del_cloud_filter(_big_buf) returns -ENOTSUPP but this error code is stored in 'ret' instead of 'aq_ret' that is used as error code sent back to VF. In this scenario where one of the mentioned functions fails the value of 'aq_ret' is zero so the VF will incorrectly receive a 'success'. Use 'aq_ret' to store return value and remove 'ret' local variable. Additionally fix the issue when filter allocation fails, in this case no notification is sent back to the VF. Fixes: e284fc280473 ("i40e: Add and delete cloud filter") Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Ivan Vecera <ivecera@redhat.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20231121211338.3348677-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-11-23ice: restore timestamp configuration after device resetJacob Keller
The driver calls ice_ptp_cfg_timestamp() during ice_ptp_prepare_for_reset() to disable timestamping while the device is resetting. This operation destroys the user requested configuration. While the driver does call ice_ptp_cfg_timestamp in ice_rebuild() to restore some hardware settings after a reset, it unconditionally passes true or false, resulting in failure to restore previous user space configuration. This results in a device reset forcibly disabling timestamp configuration regardless of current user settings. This was not detected previously due to a quirk of the LinuxPTP ptp4l application. If ptp4l detects a missing timestamp, it enters a fault state and performs recovery logic which includes executing SIOCSHWTSTAMP again, restoring the now accidentally cleared configuration. Not every application does this, and for these applications, timestamps will mysteriously stop after a PF reset, without being restored until an application restart. Fix this by replacing ice_ptp_cfg_timestamp() with two new functions: 1) ice_ptp_disable_timestamp_mode() which unconditionally disables the timestamping logic in ice_ptp_prepare_for_reset() and ice_ptp_release() 2) ice_ptp_restore_timestamp_mode() which calls ice_ptp_restore_tx_interrupt() to restore Tx timestamping configuration, calls ice_set_rx_tstamp() to restore Rx timestamping configuration, and issues an immediate TSYN_TX interrupt to ensure that timestamps which may have occurred during the device reset get processed. Modify the ice_ptp_set_timestamp_mode to directly save the user configuration and then call ice_ptp_restore_timestamp_mode. This way, reset no longer destroys the saved user configuration. This obsoletes the ice_set_tx_tstamp() function which can now be safely removed. With this change, all devices should now restore Tx and Rx timestamping functionality correctly after a PF reset without application intervention. Fixes: 77a781155a65 ("ice: enable receive hardware timestamping") Fixes: ea9b847cda64 ("ice: enable transmit timestamps for E810 devices") Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-11-23ice: unify logic for programming PFINT_TSYN_MSKJacob Keller
Commit d938a8cca88a ("ice: Auxbus devices & driver for E822 TS") modified how Tx timestamps are handled for E822 devices. On these devices, only the clock owner handles reading the Tx timestamp data from firmware. To do this, the PFINT_TSYN_MSK register is modified from the default value to one which enables reacting to a Tx timestamp on all PHY ports. The driver currently programs PFINT_TSYN_MSK in different places depending on whether the port is the clock owner or not. For the clock owner, the PFINT_TSYN_MSK value is programmed during ice_ptp_init_owner just before calling ice_ptp_tx_ena_intr to program the PHY ports. For the non-clock owner ports, the PFINT_TSYN_MSK is programmed during ice_ptp_init_port. If a large enough device reset occurs, the PFINT_TSYN_MSK register will be reset to the default value in which only the PHY associated directly with the PF will cause the Tx timestamp interrupt to trigger. The driver lacks logic to reprogram the PFINT_TSYN_MSK register after a device reset. For the E822 device, this results in the PF no longer responding to interrupts for other ports. This results in failure to deliver Tx timestamps to user space applications. Rename ice_ptp_configure_tx_tstamp to ice_ptp_cfg_tx_interrupt, and unify the logic for programming PFINT_TSYN_MSK and PFINT_OICR_ENA into one place. This function will program both registers according to the combination of user configuration and device requirements. This ensures that PFINT_TSYN_MSK is always restored when we configure the Tx timestamp interrupt. Fixes: d938a8cca88a ("ice: Auxbus devices & driver for E822 TS") Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-11-23ice: remove ptp_tx ring parameter flagJacob Keller
Before performing a Tx timestamp in ice_stamp(), the driver checks a ptp_tx ring variable to see if timestamping is enabled on that ring. This value is set for all rings whenever userspace configures Tx timestamping. Ostensibly this was done to avoid wasting cycles checking other fields when timestamping has not been enabled. However, for Tx timestamps we already get an individual per-SKB flag indicating whether userspace wants to request a timestamp on that packet. We do not gain much by also having a separate flag to check for whether timestamping was enabled. In fact, the driver currently fails to restore the field after a PF reset. Because of this, if a PF reset occurs, timestamps will be disabled. Since this flag doesn't add value in the hotpath, remove it and always provide a timestamp if the SKB flag has been set. A following change will fix the reset path to properly restore user timestamping configuration completely. This went unnoticed for some time because one of the most common applications using Tx timestamps, ptp4l, will reconfigure the socket as part of its fault recovery logic. Fixes: ea9b847cda64 ("ice: enable transmit timestamps for E810 devices") Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-11-23amd-xgbe: propagate the correct speed and duplex statusRaju Rangoju
xgbe_get_link_ksettings() does not propagate correct speed and duplex information to ethtool during cable unplug. Due to which ethtool reports incorrect values for speed and duplex. Address this by propagating correct information. Fixes: 7c12aa08779c ("amd-xgbe: Move the PHY support into amd-xgbe") Acked-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com> Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-11-23amd-xgbe: handle the corner-case during tx completionRaju Rangoju
The existing implementation uses software logic to accumulate tx completions until the specified time (1ms) is met and then poll them. However, there exists a tiny gap which leads to a race between resetting and checking the tx_activate flag. Due to this the tx completions are not reported to upper layer and tx queue timeout kicks-in restarting the device. To address this, introduce a tx cleanup mechanism as part of the periodic maintenance process. Fixes: c5aa9e3b8156 ("amd-xgbe: Initial AMD 10GbE platform driver") Acked-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com> Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-11-23amd-xgbe: handle corner-case during sfp hotplugRaju Rangoju
Force the mode change for SFI in Fixed PHY configurations. Fixed PHY configurations needs PLL to be enabled while doing mode set. When the SFP module isn't connected during boot, driver assumes AN is ON and attempts auto-negotiation. However, if the connected SFP comes up in Fixed PHY configuration the link will not come up as PLL isn't enabled while the initial mode set command is issued. So, force the mode change for SFI in Fixed PHY configuration to fix link issues. Fixes: e57f7a3feaef ("amd-xgbe: Prepare for working with more than one type of phy") Acked-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com> Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-11-23net: veth: fix ethtool stats reportingLorenzo Bianconi
Fix a possible misalignment between page_pool stats and tx xdp_stats reported in veth_get_ethtool_stats routine. The issue can be reproduced configuring the veth pair with the following tx/rx queues: $ip link add v0 numtxqueues 2 numrxqueues 4 type veth peer name v1 \ numtxqueues 1 numrxqueues 1 and loading a simple XDP program on v0 that just returns XDP_PASS. In this case on v0 the page_pool stats overwrites tx xdp_stats for queue 1. Fix the issue incrementing pp_idx of dev->real_num_tx_queues * VETH_TQ_STATS_LEN since we always report xdp_stats for all tx queues in ethtool. Fixes: 4fc418053ec7 ("net: veth: add page_pool stats") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Link: https://lore.kernel.org/r/c5b5d0485016836448453f12846c7c4ab75b094a.1700593593.git.lorenzo@kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-11-23octeontx2-pf: Fix ntuple rule creation to direct packet to VF with higher Rx ↵Suman Ghosh
queue than its PF It is possible to add a ntuple rule which would like to direct packet to a VF whose number of queues are greater/less than its PF's queue numbers. For example a PF can have 2 Rx queues but a VF created on that PF can have 8 Rx queues. As of today, ntuple rule will reject rule because it is checking the requested queue number against PF's number of Rx queues. As a part of this fix if the action of a ntuple rule is to move a packet to a VF's queue then the check is removed. Also, a debug information is printed to aware user that it is user's responsibility to cross check if the requested queue number on that VF is a valid one. Fixes: f0a1913f8a6f ("octeontx2-pf: Add support for ethtool ntuple filters") Signed-off-by: Suman Ghosh <sumang@marvell.com> Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20231121165624.3664182-1-sumang@marvell.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
generated by cgit (git 2.34.1) at 2025-09-11 16:43:01 +0000