| Age | Commit message (Collapse) | Author |
|---|
|
SPI NOR core changes:
- Read back written SR value to make sure the write was done correctly.
- Introduce a common function for Read ID that manufacturer drivers can
use to verify the Octal DTR switch worked correctly.
- Add helpers for read/write any register commands so manufacturer
drivers don't open code it every time.
- Clarify rdsr dummy cycles documentation.
- Add debugfs entry to expose internal flash parameters and state.
SPI NOR manufacturer drivers changes:
- Add support for Winbond W25Q512NW-IM, and Eon EN25QH256A.
- Move spi_nor_write_ear() to Winbond module since only Winbond flashes
use it.
- Rework Micron and Cypress Octal DTR enable methods to improve
readability.
- Use the common Read ID function to verify switch to Octal DTR mode for
Micron and Cypress flashes.
- Skip polling status on volatile register writes for Micron and Cypress
flashes since the operation is instant.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
If amba_device_try_add() return error code (not EPROBE_DEFER),
memory leak occurred when amba device fails to read periphid.
unreferenced object 0xc1c60800 (size 1024):
comm "swapper/0", pid 1, jiffies 4294937333 (age 75.200s)
hex dump (first 32 bytes):
40 40 db c1 04 08 c6 c1 04 08 c6 c1 00 00 00 00 @@..............
00 d9 c1 c1 84 6f 38 c1 00 00 00 00 01 00 00 00 .....o8.........
backtrace:
[<(ptrval)>] kmem_cache_alloc_trace+0x168/0x2b4
[<(ptrval)>] amba_device_alloc+0x38/0x7c
[<(ptrval)>] of_platform_bus_create+0x2f4/0x4e8
[<(ptrval)>] of_platform_bus_create+0x380/0x4e8
[<(ptrval)>] of_platform_bus_create+0x380/0x4e8
[<(ptrval)>] of_platform_bus_create+0x380/0x4e8
[<(ptrval)>] of_platform_populate+0x70/0xc4
[<(ptrval)>] of_platform_default_populate_init+0xb4/0xcc
[<(ptrval)>] do_one_initcall+0x58/0x218
[<(ptrval)>] kernel_init_freeable+0x250/0x29c
[<(ptrval)>] kernel_init+0x24/0x148
[<(ptrval)>] ret_from_fork+0x14/0x1c
[<00000000>] 0x0
unreferenced object 0xc1db4040 (size 64):
comm "swapper/0", pid 1, jiffies 4294937333 (age 75.200s)
hex dump (first 32 bytes):
31 63 30 66 30 30 30 30 2e 77 64 74 00 00 00 00 1c0f0000.wdt....
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<(ptrval)>] __kmalloc_track_caller+0x19c/0x2f8
[<(ptrval)>] kvasprintf+0x60/0xcc
[<(ptrval)>] kvasprintf_const+0x54/0x78
[<(ptrval)>] kobject_set_name_vargs+0x34/0xa8
[<(ptrval)>] dev_set_name+0x40/0x5c
[<(ptrval)>] of_device_make_bus_id+0x128/0x1f8
[<(ptrval)>] of_platform_bus_create+0x4dc/0x4e8
[<(ptrval)>] of_platform_bus_create+0x380/0x4e8
[<(ptrval)>] of_platform_bus_create+0x380/0x4e8
[<(ptrval)>] of_platform_bus_create+0x380/0x4e8
[<(ptrval)>] of_platform_populate+0x70/0xc4
[<(ptrval)>] of_platform_default_populate_init+0xb4/0xcc
[<(ptrval)>] do_one_initcall+0x58/0x218
[<(ptrval)>] kernel_init_freeable+0x250/0x29c
[<(ptrval)>] kernel_init+0x24/0x148
[<(ptrval)>] ret_from_fork+0x14/0x1c
Fix them by adding amba_device_put() to release device name and
amba device.
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
|
|
Add new amba_read_periphid() helper to simplify error handling.
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
|
|
All elements of the default endpoint configuration are used in the
code when programming an endpoint for use. But none of the other
configuration data is ever needed once things are initialized.
So rather than saving a pointer to *all* of the configuration data,
save a copy of only the endpoint configuration portion.
This will eventually allow endpoint configuration to be modifiable
at runtime. But even before that it means we won't keep a pointer
to configuration data after when no longer needed.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Rename the just-moved data structure types to drop the "_data"
suffix, to make it more obvious they are no longer meant to be used
just as read-only initialization data. Rename the fields and
variables of these types to use "config" instead of "data" in the
name. This is another small step meant to facilitate review.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Move the definitions of the structures defining endpoint-specific
configuration data out of "ipa_data.h" and into "ipa_endpoint.h".
This is a trivial movement of code without any other change, to
prepare for the next few patches.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
About half of the fields set by the call in ipa_modem_netdev_setup()
are overwritten after the call. Instead, just skip the call, and
open-code the (other) assignments it makes to the net_device
structure fields.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If we program an RX endpoint to have no header (header length is 0),
header-related endpoint configuration values are meaningless and are
ignored.
The only case we support that defines a header is QMAP endpoints.
In ipa_endpoint_init_hdr_ext() we set the endianness mask value
unconditionally, but it should not be done if there is no header
(meaning it is not configured for QMAP).
Set the endianness conditionally, and rearrange the logic in that
function slightly to avoid testing the qmap flag twice.
Delete an incorrect comment in ipa_endpoint_init_aggr().
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The CHANNEL_NOT_RUNNING error condition has been generalized, so
rename it to be INCORRECT_CHANNEL_STATE.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In gsi_channel_update(), a reference count is taken on the last
completed transaction "to keep it from completing" before we give
the event back to the hardware. Completion processing for that
transaction (and any other "new" ones) will not occur until after
this function returns, so there's no risk it completing early. So
there's no need to take and drop the additional transaction
reference.
Use local variables in the call to gsi_evt_ring_doorbell().
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
https://gitlab.freedesktop.org/abhinavk/msm into drm-next
5.19 fixes for msm-next
- Limiting WB modes to max sspp linewidth
- Fixing the supported rotations to add 180 back for IGT
- Fix to handle pm_runtime_get_sync() errors to avoid unclocked access
in the bind() path for dpu driver
- Fix the irq_free() without request issue which was a big-time
hitter in the CI-runs.
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Abhinav Kumar <quic_abhinavk@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/b011d51d-d634-123e-bf5f-27219ee33151@quicinc.com
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-next
A device tree binding change for Rockchip VOP2
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220519080556.42p52cya4u6y3kps@houat
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto fix from Herbert Xu:
"Fix a regression in a recent fix to qcom-rng"
* tag 'v5.18-p2' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: qcom-rng - fix infinite loop on requests not multiple of WORD_SZ
|
|
omap_rom_rng_runtime_resume()
'ddata->clk' is enabled by clk_prepare_enable(), it should be disabled
by clk_disable_unprepare().
Fixes: 8d9d4bdc495f ("hwrng: omap3-rom - Use runtime PM instead of custom functions")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Should not to uses the CRYPTO_ALG_ALLOCATES_MEMORY in SEC2. The SEC2
driver uses the pre-allocated buffers, including the src sgl pool, dst
sgl pool and other qp ctx resources. (e.g. IV buffer, mac buffer, key
buffer). The SEC2 driver doesn't allocate memory during request processing.
The driver only maps software sgl to allocated hardware sgl during I/O. So
here is fix it.
Signed-off-by: Kai Ye <yekai13@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
QAT_401xx is a derivative of 4xxx. Add support for that device in the
qat_4xxx driver by including the DIDs (both PF and VF), extending the
probe and the firmware loader.
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Srinivas Kerekare <srinivas.kerekare@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Re-enable the registration of algorithms after fixes to (1) use
pre-allocated buffers in the datapath and (2) support the
CRYPTO_TFM_REQ_MAY_BACKLOG flag.
This reverts commit 8893d27ffcaf6ec6267038a177cb87bcde4dd3de.
Cc: stable@vger.kernel.org
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Marco Chiappero <marco.chiappero@intel.com>
Reviewed-by: Adam Guerin <adam.guerin@intel.com>
Reviewed-by: Wojciech Ziemba <wojciech.ziemba@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
If a request has the flag CRYPTO_TFM_REQ_MAY_SLEEP set, allocate memory
using the flag GFP_KERNEL otherwise use GFP_ATOMIC.
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Adam Guerin <adam.guerin@intel.com>
Reviewed-by: Wojciech Ziemba <wojciech.ziemba@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Reject requests with a source buffer that is bigger than the size of the
key. This is to prevent a possible integer underflow that might happen
when copying the source scatterlist into a linear buffer.
Cc: stable@vger.kernel.org
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Adam Guerin <adam.guerin@intel.com>
Reviewed-by: Wojciech Ziemba <wojciech.ziemba@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Reject requests with a source buffer that is bigger than the size of the
key. This is to prevent a possible integer underflow that might happen
when copying the source scatterlist into a linear buffer.
Cc: stable@vger.kernel.org
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Adam Guerin <adam.guerin@intel.com>
Reviewed-by: Wojciech Ziemba <wojciech.ziemba@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The functions qat_dh_compute_value() allocates memory with
dma_alloc_coherent() if the source or the destination buffers are made
of multiple flat buffers or of a size that is not compatible with the
hardware.
This memory is then freed with dma_free_coherent() in the context of a
tasklet invoked to handle the response for the corresponding request.
According to Documentation/core-api/dma-api-howto.rst, the function
dma_free_coherent() cannot be called in an interrupt context.
Replace allocations with dma_alloc_coherent() in the function
qat_dh_compute_value() with kmalloc() + dma_map_single().
Cc: stable@vger.kernel.org
Fixes: c9839143ebbf ("crypto: qat - Add DH support")
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Adam Guerin <adam.guerin@intel.com>
Reviewed-by: Wojciech Ziemba <wojciech.ziemba@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
After commit f5ff79fddf0e ("dma-mapping: remove CONFIG_DMA_REMAP"), if
the algorithms are enabled, the driver crashes with a BUG_ON while
executing vunmap() in the context of a tasklet. This is due to the fact
that the function dma_free_coherent() cannot be called in an interrupt
context (see Documentation/core-api/dma-api-howto.rst).
The functions qat_rsa_enc() and qat_rsa_dec() allocate memory with
dma_alloc_coherent() if the source or the destination buffers are made
of multiple flat buffers or of a size that is not compatible with the
hardware.
This memory is then freed with dma_free_coherent() in the context of a
tasklet invoked to handle the response for the corresponding request.
Replace allocations with dma_alloc_coherent() in the functions
qat_rsa_enc() and qat_rsa_dec() with kmalloc() + dma_map_single().
Cc: stable@vger.kernel.org
Fixes: a990532023b9 ("crypto: qat - Add support for RSA algorithm")
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Adam Guerin <adam.guerin@intel.com>
Reviewed-by: Wojciech Ziemba <wojciech.ziemba@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
When an RSA key represented in form 2 (as defined in PKCS #1 V2.1) is
used, some components of the private key persist even after the TFM is
released.
Replace the explicit calls to free the buffers in qat_rsa_exit_tfm()
with a call to qat_rsa_clear_ctx() which frees all buffers referenced in
the TFM context.
Cc: stable@vger.kernel.org
Fixes: 879f77e9071f ("crypto: qat - Add RSA CRT mode")
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Adam Guerin <adam.guerin@intel.com>
Reviewed-by: Wojciech Ziemba <wojciech.ziemba@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The implementations of the crypto algorithms (aead, skcipher, etc) in
the QAT driver do not properly support requests with the
CRYPTO_TFM_REQ_MAY_BACKLOG flag set. If the HW queue is full, the driver
returns -EBUSY but does not enqueue the request. This can result in
applications like dm-crypt waiting indefinitely for the completion of a
request that was never submitted to the hardware.
Fix this by adding a software backlog queue: if the ring buffer is more
than eighty percent full, then the request is enqueued to a backlog
list and the error code -EBUSY is returned back to the caller.
Requests in the backlog queue are resubmitted at a later time, in the
context of the callback of a previously submitted request.
The request for which -EBUSY is returned is then marked as -EINPROGRESS
once submitted to the HW queues.
The submission loop inside the function qat_alg_send_message() has been
modified to decide which submission policy to use based on the request
flags. If the request does not have the CRYPTO_TFM_REQ_MAY_BACKLOG set,
the previous behaviour has been preserved.
Based on a patch by
Vishnu Das Ramachandran <vishnu.dasx.ramachandran@intel.com>
Cc: stable@vger.kernel.org
Fixes: d370cec32194 ("crypto: qat - Intel(R) QAT crypto interface")
Reported-by: Mikulas Patocka <mpatocka@redhat.com>
Reported-by: Kyle Sanderson <kyle.leet@gmail.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Marco Chiappero <marco.chiappero@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
All the algorithms in qat_algs.c and qat_asym_algs.c use the same
pattern to submit messages to the HW queues. Move the submission loop
to a new function, qat_alg_send_message(), and share it between the
symmetric and the asymmetric algorithms.
As part of this rework, since the number of retries before returning an
error is inconsistent between the symmetric and asymmetric
implementations, set it to a value that works for both (i.e. 20, was 10
in qat_algs.c and 100 in qat_asym_algs.c)
In addition fix the return code reported when the HW queues are full.
In that case return -ENOSPC instead of -EBUSY.
Including stable in CC since (1) the error code returned if the HW queues
are full is incorrect and (2) to facilitate the backport of the next fix
"crypto: qat - add backlog mechanism".
Cc: stable@vger.kernel.org
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Marco Chiappero <marco.chiappero@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
In order to do DMAs, the QAT device requires that the scatterlist
structures are mapped and translated into a format that the firmware can
understand. This is defined as the composition of a scatter gather list
(SGL) descriptor header, the struct qat_alg_buf_list, plus a variable
number of flat buffer descriptors, the struct qat_alg_buf.
The allocation and mapping of these data structures is done each time a
request is received from the skcipher and aead APIs.
In an OOM situation, this behaviour might lead to a dead-lock if an
allocation fails.
Based on the conversation in [1], increase the size of the aead and
skcipher request contexts to include an SGL descriptor that can handle
a maximum of 4 flat buffers.
If requests exceed 4 entries buffers, memory is allocated dynamically.
[1] https://lore.kernel.org/linux-crypto/20200722072932.GA27544@gondor.apana.org.au/
Cc: stable@vger.kernel.org
Fixes: d370cec32194 ("crypto: qat - Intel(R) QAT crypto interface")
Reported-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Marco Chiappero <marco.chiappero@intel.com>
Reviewed-by: Wojciech Ziemba <wojciech.ziemba@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Set to zero the context buffers containing the DH key before they are
freed.
This is a defense in depth measure that avoids keys to be recovered from
memory in case the system is compromised between the free of the buffer
and when that area of memory (containing keys) gets overwritten.
Cc: stable@vger.kernel.org
Fixes: c9839143ebbf ("crypto: qat - Add DH support")
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Adam Guerin <adam.guerin@intel.com>
Reviewed-by: Wojciech Ziemba <wojciech.ziemba@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
I missed this in the barrage of GCC 12 warnings. Commit cf2df74e202d
("net: fix dev_fill_forward_path with pppoe + bridge") changed
the pointer into an array.
Fixes: d7e6f5836038 ("Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net")
Link: https://lore.kernel.org/r/20220520012555.2262461-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When removing the rcu_read_lock in bond_ethtool_get_ts_info() as
discussed [1], I didn't notice it could be called via setsockopt,
which doesn't hold rcu lock, as syzbot pointed:
stack backtrace:
CPU: 0 PID: 3599 Comm: syz-executor317 Not tainted 5.18.0-rc5-syzkaller-01392-g01f4685797a5 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106
bond_option_active_slave_get_rcu include/net/bonding.h:353 [inline]
bond_ethtool_get_ts_info+0x32c/0x3a0 drivers/net/bonding/bond_main.c:5595
__ethtool_get_ts_info+0x173/0x240 net/ethtool/common.c:554
ethtool_get_phc_vclocks+0x99/0x110 net/ethtool/common.c:568
sock_timestamping_bind_phc net/core/sock.c:869 [inline]
sock_set_timestamping+0x3a3/0x7e0 net/core/sock.c:916
sock_setsockopt+0x543/0x2ec0 net/core/sock.c:1221
__sys_setsockopt+0x55e/0x6a0 net/socket.c:2223
__do_sys_setsockopt net/socket.c:2238 [inline]
__se_sys_setsockopt net/socket.c:2235 [inline]
__x64_sys_setsockopt+0xba/0x150 net/socket.c:2235
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7f8902c8eb39
Fix it by adding rcu_read_lock and take a ref on the real_dev.
Since dev_hold() and dev_put() can take NULL these days, we can
skip checking if real_dev exist.
[1] https://lore.kernel.org/netdev/27565.1642742439@famine/
Reported-by: syzbot+92beb3d46aab498710fa@syzkaller.appspotmail.com
Fixes: aa6034678e87 ("bonding: use rcu_dereference_rtnl when get bonding active slave")
Suggested-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20220519020148.1058344-1-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
GCC 12 seems upset that we check ipa_irq against array bound
but then proceed, anyway:
drivers/net/ipa/ipa_interrupt.c: In function ‘ipa_interrupt_add’:
drivers/net/ipa/ipa_interrupt.c:196:27: warning: array subscript 30 is above array bounds of ‘void (*[30])(struct ipa *, enum ipa_irq_id)’ [-Warray-bounds]
196 | interrupt->handler[ipa_irq] = handler;
| ~~~~~~~~~~~~~~~~~~^~~~~~~~~
drivers/net/ipa/ipa_interrupt.c:42:27: note: while referencing ‘handler’
42 | ipa_irq_handler_t handler[IPA_IRQ_COUNT];
| ^~~~~~~
Reviewed-by: Alex Elder <elder@linaro.org>
Link: https://lore.kernel.org/r/20220519004417.2109886-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
GCC 12 warns:
drivers/net/wwan/iosm/iosm_ipc_protocol_ops.c: In function ‘ipc_protocol_dl_td_process’:
drivers/net/wwan/iosm/iosm_ipc_protocol_ops.c:406:13: warning: the comparison will always evaluate as ‘true’ for the address of ‘cb’ will never be NULL [-Waddress]
406 | if (!IPC_CB(skb)) {
| ^
Indeed the check seems entirely pointless. Hopefully the other
validation checks will catch if the cb is bad, but it can't be
NULL.
Reviewed-by: M Chetan Kumar <m.chetan.kumar@intel.com>
Link: https://lore.kernel.org/r/20220519004342.2109832-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
gswip_port_fdb_dump() reads the MAC bridge entries. The error message
should say "failed to read mac bridge entry". While here, also add the
index to the error print so humans can get to the cause of the problem
easier.
Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The first N entries in priv->vlans are reserved for managing ports which
are not part of a bridge. Use priv->hw_info->max_ports to consistently
access per-bridge entries at index 7. Starting at
priv->hw_info->cpu_port (6) is harmless in this case because
priv->vlan[6].bridge is always NULL so the comparison result is always
false (which results in this entry being skipped).
Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
t7xx_request_irq() error: uninitialized symbol 'ret'.
t7xx_core_hk_handler() error: potentially dereferencing uninitialized 'event'.
If the condition to enter the loop that waits for the handshake event
is false on the first iteration then the uninitialized 'event' will be
dereferenced, fix this by initializing 'event' to NULL.
t7xx_port_proxy_recv_skb() warn: variable dereferenced before check 'skb'.
No need to check skb at t7xx_port_proxy_recv_skb() since we know it
is always called with a valid skb by t7xx_cldma_gpd_rx_from_q().
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Ricardo Martinez <ricardo.martinez@linux.intel.com>
Link: https://lore.kernel.org/r/20220518195529.126246-1-ricardo.martinez@linux.intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Partially convert mtk_eth_soc to phylink_pcs, moving the configuration,
link up and AN restart over. However, it seems mac_pcs_get_state()
doesn't actually get the state from the PCS, so we can't convert that
over without a better understanding of the hardware.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Provide a mtk_pcs structure which encapsulates everything that the PCS
functions need (the regmap and ana_rgc3 offset), and use this in the
PCS functions. Provide shim functions to convert from the existing
"mtk_sgmii_*" interface to the converted PCS functions.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The SGMIISYS configuration is performed while ETHSYS_SYSCFG0 is in a
disabled state. In order to preserve this when we switch to phylink_pcs
we need to move the restoration of this register to the mac_finish()
callback.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Move the setting of the MTK_MAC_MCR register from the end of mac_config
into the phylink mac_finish() method, to keep it as the very last write
that is done during configuration.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a fixme comment for the last remaining incorrect usage of
state->speed in the mac_config() method, which is strangely in a code
path which is only run when the PHY interface mode changes.
This means if we are in RGMII mode, changes in state->speed will not
cause the INTF_MODE, TRGMII_RCK_CTRL and TRGMII_TCK_CTRL registers to
be set according to the speed, nor will the TRGPLL clock be set to the
correct value.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Provide mtk_sgmii_config() to wrap up the decisions about which SGMII
configuration will be called.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Now that mtk_sgmii_setup_mode_force() only uses the interface mode
from the phylink state, pass just the interface mode into this
function.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Phylink does not guarantee that state->duplex will be set correctly in
the mac_config() call, so it's a bug that the driver makes use of it.
Move the 802.3z PCS duplex configuration to mac_link_up().
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Phylink does not guarantee that state->speed will be set correctly in
the mac_config() call, so it's a bug that the driver makes use of it.
Moreover, it is making use of it in a function that is only ever called
for 1000BASE-X and 2500BASE-X which operate at a fixed speed which
happens to be the same setting irrespective of the interface mode. We
can simply remove the switch statement and just set the SGMII interface
speed.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The PCS speed setting is a two bit field, but it is defined as two
separate bits. Add a bitfield mask for the speed definitions, an
use the FIELD_PREP() macro to define each PCS speed.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The "flags" member of struct mtk_sgmii appears to be unused, as are
the MTK_SGMII_PHYSPEED_* and MTK_HAS_FLAGS() macros. Remove them.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
mac->mode is only ever written to in one location, and is thus
superflous. Remove it.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fix referencing sense data when it is invalid. When the length of the data
segment is 0, there is no valid information in the rsp field, so
ufshpb_rsp_upiu() is returned without additional operation.
Link: https://lore.kernel.org/r/252651381.41652940482659.JavaMail.epsvc@epcpadp4
Fixes: 4b5f49079c52 ("scsi: ufs: ufshpb: L2P map management for HPB read")
Acked-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Daejun Park <daejun7.park@samsung.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
There are sleep in atomic context bugs when the request to secure
element of st21nfca is timeout. The root cause is that kzalloc and
alloc_skb with GFP_KERNEL parameter and mutex_lock are called in
st21nfca_se_wt_timeout which is a timer handler. The call tree shows
the execution paths that could lead to bugs:
(Interrupt context)
st21nfca_se_wt_timeout
nfc_hci_send_event
nfc_hci_hcp_message_tx
kzalloc(..., GFP_KERNEL) //may sleep
alloc_skb(..., GFP_KERNEL) //may sleep
mutex_lock() //may sleep
This patch moves the operations that may sleep into a work item.
The work item will run in another kernel thread which is in
process context to execute the bottom half of the interrupt.
So it could prevent atomic context from sleeping.
Fixes: 2130fb97fecf ("NFC: st21nfca: Adding support for secure element")
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220518115733.62111-1-duoming@zju.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The netif_receive_skb() function frees "skb" so store skb->len before
it is freed.
Fixes: fd3040b9394c ("net: ethernet: Add driver for Sunplus SP7021")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/YoUuy4iTjFAcSn03@kili
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Lenovo Thunderbolt 4 Dock, and other Lenovo USB Docks are using the
original Realtek USB ethernet Vendor and Product IDs
If the Network device is Realtek verify that it is on a Lenovo USB hub
before enabling the passthru feature
This also adds in the device IDs for the Lenovo USB Dongle and one other
USB-C dock
V2 fix formating of code
V3 remove Generic define for Device ID 0x8153 and change it to use value
V4 rearrange defines and case statement to put them in better order
v5 create helper function to do the testing work as suggested
Signed-off-by: David Ober <dober6023@gmail.com>
Link: https://lore.kernel.org/r/20220517180539.25839-1-dober6023@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
